bump ifxmips to .30
authorJohn Crispin <john@openwrt.org>
Fri, 2 Oct 2009 08:09:27 +0000 (08:09 +0000)
committerJohn Crispin <john@openwrt.org>
Fri, 2 Oct 2009 08:09:27 +0000 (08:09 +0000)
SVN-Revision: 17817

85 files changed:
target/linux/ifxmips/Makefile
target/linux/ifxmips/base-files/etc/config/network [new file with mode: 0644]
target/linux/ifxmips/config-2.6.27 [deleted file]
target/linux/ifxmips/config-2.6.28 [deleted file]
target/linux/ifxmips/config-2.6.30 [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/ifxmips/board.c
target/linux/ifxmips/files/arch/mips/ifxmips/clock.c
target/linux/ifxmips/files/arch/mips/ifxmips/setup.c
target/linux/ifxmips/files/arch/mips/ifxmips/timer.c
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_peripheral_definitions.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_ssc.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_ssc_defines.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_dma.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_ebu.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_gpio.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_gptu.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_irq.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_led.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_app.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_app_ioctl.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_bsp.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_ioctl.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_linux.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_pmu.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_prom.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/cgu.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/gpio.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/irq.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/war.h [new file with mode: 0644]
target/linux/ifxmips/files/arch/mips/pci/pci-ifxmips.c
target/linux/ifxmips/files/drivers/mtd/maps/ifxmips.c
target/linux/ifxmips/files/drivers/net/ifxmips_mii0.c
target/linux/ifxmips/files/drivers/watchdog/ifxmips_wdt.c
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_peripheral_definitions.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_ssc.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_ssc_defines.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_cgu.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_dma.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_ebu.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_gpio.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_gptu.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_irq.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_led.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app_ioctl.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_bsp.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_ioctl.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_linux.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_pmu.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_prom.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/gpio.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/irq.h [deleted file]
target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/war.h [deleted file]
target/linux/ifxmips/patches-2.6.27/000-mips-bad-intctl.patch [deleted file]
target/linux/ifxmips/patches-2.6.27/010-mips_clocksource_init_war.patch [deleted file]
target/linux/ifxmips/patches-2.6.27/100-board.patch [deleted file]
target/linux/ifxmips/patches-2.6.27/110-drivers.patch [deleted file]
target/linux/ifxmips/patches-2.6.27/160-cfi-swap.patch [deleted file]
target/linux/ifxmips/patches-2.6.27/170-dma_hack.patch [deleted file]
target/linux/ifxmips/patches-2.6.27/200-genirq_fix.patch [deleted file]
target/linux/ifxmips/patches-2.6.28/000-mips-bad-intctl.patch [deleted file]
target/linux/ifxmips/patches-2.6.28/010-mips_clocksource_init_war.patch [deleted file]
target/linux/ifxmips/patches-2.6.28/100-board.patch [deleted file]
target/linux/ifxmips/patches-2.6.28/110-drivers.patch [deleted file]
target/linux/ifxmips/patches-2.6.28/160-cfi-swap.patch [deleted file]
target/linux/ifxmips/patches-2.6.28/170-dma_hack.patch [deleted file]
target/linux/ifxmips/patches-2.6.28/200-genirq_fix.patch [deleted file]
target/linux/ifxmips/patches-2.6.30/000-mips-bad-intctl.patch [new file with mode: 0644]
target/linux/ifxmips/patches-2.6.30/010-mips_clocksource_init_war.patch [new file with mode: 0644]
target/linux/ifxmips/patches-2.6.30/100-board.patch [new file with mode: 0644]
target/linux/ifxmips/patches-2.6.30/110-drivers.patch [new file with mode: 0644]
target/linux/ifxmips/patches-2.6.30/160-cfi-swap.patch [new file with mode: 0644]
target/linux/ifxmips/patches-2.6.30/170-dma_hack.patch [new file with mode: 0644]
target/linux/ifxmips/patches-2.6.30/200-genirq_fix.patch [new file with mode: 0644]
target/linux/ifxmips/patches-2.6.30/201-atm.patch [new file with mode: 0644]
target/linux/ifxmips/patches/000-mips-bad-intctl.patch [deleted file]
target/linux/ifxmips/patches/010-mips_clocksource_init_war.patch [deleted file]
target/linux/ifxmips/patches/100-board.patch [deleted file]
target/linux/ifxmips/patches/110-drivers.patch [deleted file]
target/linux/ifxmips/patches/160-cfi-swap.patch [deleted file]
target/linux/ifxmips/patches/170-dma_hack.patch [deleted file]

index eee0d44e919124d8d8f016091d5bec9de37c7200..7f27b55d35672b75f92f40bb947d20753d35af15 100644 (file)
@@ -9,12 +9,13 @@ include $(TOPDIR)/rules.mk
 ARCH:=mips
 BOARD:=ifxmips
 BOARDNAME:=Infineon Mips
 ARCH:=mips
 BOARD:=ifxmips
 BOARDNAME:=Infineon Mips
-FEATURES:=squashfs jffs2
+FEATURES:=squashfs jffs2 atm
 
 
-LINUX_VERSION:=2.6.28.10
+LINUX_VERSION:=2.6.30.5
 
 include $(INCLUDE_DIR)/target.mk
 
 include $(INCLUDE_DIR)/target.mk
-DEFAULT_PACKAGES+=uboot-ifxmips hostapd-mini
+DEFAULT_PACKAGES+=uboot-ifxmips kmod-pppoa ppp-mod-pppoa linux-atm atm-tools br2684ctl kmod-ifxmips-atm dwc_usb
+
 
 define Target/Description
        Build firmware images for Infineon Mips Controllers
 
 define Target/Description
        Build firmware images for Infineon Mips Controllers
diff --git a/target/linux/ifxmips/base-files/etc/config/network b/target/linux/ifxmips/base-files/etc/config/network
new file mode 100644 (file)
index 0000000..8f5624b
--- /dev/null
@@ -0,0 +1,27 @@
+config interface loopback
+       option ifname   lo
+       option proto    static
+       option ipaddr   127.0.0.1
+       option netmask  255.0.0.0
+
+config interface lan
+       option ifname   eth0
+       option type     bridge
+       option proto    static
+       option ipaddr   192.168.1.1
+       option netmask  255.255.255.0
+
+config atm-bridge
+       option unit             0
+       option encaps   llc
+       option vpi              1
+       option vci              32
+       option payload  bridged # some ISPs need this set to 'routed'
+
+config interface wan
+       option ifname   nas0
+       option proto    pppoe
+       option username ""
+       option password ""
+       option defaultroute 0
+       option unit 1
diff --git a/target/linux/ifxmips/config-2.6.27 b/target/linux/ifxmips/config-2.6.27
deleted file mode 100644 (file)
index 8003af5..0000000
+++ /dev/null
@@ -1,191 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_8139TOO is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_ATM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_BCM47XX is not set
-CONFIG_BITREVERSE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLASSIC_RCU=y
-CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2"
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_GPIO_DEVICE=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_CLK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-# CONFIG_I2C is not set
-# CONFIG_IDE is not set
-CONFIG_IFXMIPS=y
-CONFIG_IFXMIPS_EEPROM=y
-CONFIG_IFXMIPS_GPIO_RST_BTN=y
-# CONFIG_IFXMIPS_MEI is not set
-CONFIG_IFXMIPS_MII0=y
-# CONFIG_IFXMIPS_PROM_ASC0 is not set
-CONFIG_IFXMIPS_PROM_ASC1=y
-CONFIG_IFXMIPS_SSC=y
-CONFIG_IFXMIPS_WDT=y
-# CONFIG_IMAGE_CMDLINE_HACK is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_IFXMIPS=y
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_IFXMIPS=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_NATSEMI is not set
-CONFIG_NF_CT_ACCT=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
-# CONFIG_R6040 is not set
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_WAIT_SCAN is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_IFXMIPS=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-# CONFIG_TC35815 is not set
-# CONFIG_TICK_ONESHOT is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_USB is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_DWC_HCD is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIDEO_MEDIA is not set
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ifxmips/config-2.6.28 b/target/linux/ifxmips/config-2.6.28
deleted file mode 100644 (file)
index a59c46e..0000000
+++ /dev/null
@@ -1,157 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_8139TOO is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_BASE_SMALL=0
-# CONFIG_BCM47XX is not set
-CONFIG_BITREVERSE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLASSIC_RCU=y
-CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2"
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIO_DEVICE=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_I2C is not set
-# CONFIG_IDE is not set
-CONFIG_IFXMIPS=y
-CONFIG_IFXMIPS_EEPROM=y
-CONFIG_IFXMIPS_GPIO_RST_BTN=y
-# CONFIG_IFXMIPS_MEI is not set
-CONFIG_IFXMIPS_MII0=y
-# CONFIG_IFXMIPS_PROM_ASC0 is not set
-CONFIG_IFXMIPS_PROM_ASC1=y
-CONFIG_IFXMIPS_SSC=y
-CONFIG_IFXMIPS_WDT=y
-# CONFIG_IMAGE_CMDLINE_HACK is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_IFXMIPS=y
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_EMMA is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_IFXMIPS=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
-# CONFIG_R6040 is not set
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_IFXMIPS=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_VGASTATE is not set
-# CONFIG_VIA_RHINE is not set
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ifxmips/config-2.6.30 b/target/linux/ifxmips/config-2.6.30
new file mode 100644 (file)
index 0000000..7eefc15
--- /dev/null
@@ -0,0 +1,164 @@
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BCM47XX is not set
+# CONFIG_BINARY_PRINTF is not set
+CONFIG_BITREVERSE=y
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2"
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32=y
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR2=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_STD_PC_SERIAL_PORT=y
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_I2C is not set
+CONFIG_IFXMIPS=y
+# CONFIG_IFXMIPS_EEPROM is not set
+CONFIG_IFXMIPS_GPIO_RST_BTN=y
+# CONFIG_IFXMIPS_MEI is not set
+CONFIG_IFXMIPS_MII0=y
+# CONFIG_IFXMIPS_PROM_ASC0 is not set
+CONFIG_IFXMIPS_PROM_ASC1=y
+# CONFIG_IFXMIPS_SSC is not set
+CONFIG_IFXMIPS_WDT=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_KALLSYMS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_IFXMIPS=y
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MIPS_FPU_EMU is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MIPS_VPE_LOADER is not set
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_IFXMIPS=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCSPKR_PLATFORM is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_PROM_EMU is not set
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_IFXMIPS=y
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MULTITHREADING=y
+# CONFIG_TC35815 is not set
+CONFIG_TRACING_SUPPORT=y
+CONFIG_TRAD_SIGNALS=y
+CONFIG_USB_SUPPORT=y
+CONFIG_ZONE_DMA_FLAG=0
index 2a803ff85a7f7af9371657a84b1706f2cbd71431..0f05aed057d15da484e327a29e7d473028458736 100644 (file)
@@ -34,6 +34,7 @@
 #include <asm/bootinfo.h>
 #include <asm/irq.h>
 #include <asm/ifxmips/ifxmips.h>
 #include <asm/bootinfo.h>
 #include <asm/irq.h>
 #include <asm/ifxmips/ifxmips.h>
+#include <asm/ifxmips/ifxmips_irq.h>
 
 #define MAX_BOARD_NAME_LEN             32
 #define MAX_IFXMIPS_DEVS               9
 
 #define MAX_BOARD_NAME_LEN             32
 #define MAX_IFXMIPS_DEVS               9
@@ -132,6 +133,7 @@ static struct gpio_led arv4519_gpio_leds[] = {
        { .name = "ifx:green:internet", .gpio = 5, .active_low = 1, },
        { .name = "ifx:red:internet", .gpio = 8, .active_low = 1, },
        { .name = "ifx:green:wlan", .gpio = 6, .active_low = 1, },
        { .name = "ifx:green:internet", .gpio = 5, .active_low = 1, },
        { .name = "ifx:red:internet", .gpio = 8, .active_low = 1, },
        { .name = "ifx:green:wlan", .gpio = 6, .active_low = 1, },
+       { .name = "ifx:green:usbpwr", .gpio = 14, .active_low = 1, },
        { .name = "ifx:green:usb", .gpio = 19, .active_low = 1, },
 };
 
        { .name = "ifx:green:usb", .gpio = 19, .active_low = 1, },
 };
 
@@ -146,18 +148,41 @@ static struct platform_device ifxmips_gpio_leds = {
 };
 #endif
 
 };
 #endif
 
+static struct resource dwc_usb_res[] = {
+       {
+               .name = "dwc_usb_membase",
+               .flags = IORESOURCE_MEM,
+               .start = 0x1E101000,
+               .end = 0x1E101FFF
+       },
+       {
+               .name = "dwc_usb_irq",
+               .flags = IORESOURCE_IRQ,
+               .start = IFXMIPS_USB_INT,
+       }
+};
+
+static struct platform_device dwc_usb =
+{
+       .id = 0,
+       .name = "dwc_usb",
+       .resource = dwc_usb_res,
+       .num_resources = ARRAY_SIZE(dwc_usb_res),
+};
+
 struct platform_device *easy50712_devs[] = {
        &ifxmips_led, &ifxmips_gpio, &ifxmips_mii,
 struct platform_device *easy50712_devs[] = {
        &ifxmips_led, &ifxmips_gpio, &ifxmips_mii,
-       &ifxmips_mtd, &ifxmips_wdt, &ifxmips_gpio_dev
+       &ifxmips_mtd, &ifxmips_wdt, &ifxmips_gpio_dev, &dwc_usb
 };
 
 struct platform_device *easy4010_devs[] = {
        &ifxmips_led, &ifxmips_gpio, &ifxmips_mii,
 };
 
 struct platform_device *easy4010_devs[] = {
        &ifxmips_led, &ifxmips_gpio, &ifxmips_mii,
-       &ifxmips_mtd, &ifxmips_wdt, &ifxmips_gpio_dev
+       &ifxmips_mtd, &ifxmips_wdt, &ifxmips_gpio_dev, &dwc_usb
 };
 
 struct platform_device *arv5419_devs[] = {
 };
 
 struct platform_device *arv5419_devs[] = {
-       &ifxmips_gpio, &ifxmips_mii, &ifxmips_mtd, &ifxmips_wdt,
+       &ifxmips_gpio, &ifxmips_mii, &ifxmips_mtd,
+       &ifxmips_gpio_dev, &ifxmips_wdt, &dwc_usb,
 #ifdef CONFIG_LEDS_GPIO
        &ifxmips_gpio_leds,
 #endif
 #ifdef CONFIG_LEDS_GPIO
        &ifxmips_gpio_leds,
 #endif
index d44bf44e4f3cb308ddc3a0289001b23585d215a4..a8d198479622e619ec190ecc3a6a63e8cbcfacb0 100644 (file)
 #include <asm/div64.h>
 #include <linux/errno.h>
 #include <asm/ifxmips/ifxmips.h>
 #include <asm/div64.h>
 #include <linux/errno.h>
 #include <asm/ifxmips/ifxmips.h>
-
-#define BASIC_INPUT_CLOCK_FREQUENCY_1   35328000
-#define BASIC_INPUT_CLOCK_FREQUENCY_2   36000000
-
-#define BASIS_INPUT_CRYSTAL_USB         12000000
-
-#define GET_BITS(x, msb, lsb)           (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
-
-
-#define CGU_PLL0_PHASE_DIVIDER_ENABLE   (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 31))
-#define CGU_PLL0_BYPASS                 (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 30))
-#define CGU_PLL0_CFG_DSMSEL             (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 28))
-#define CGU_PLL0_CFG_FRAC_EN            (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 27))
-#define CGU_PLL1_SRC                    (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 31))
-#define CGU_PLL1_BYPASS                 (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 30))
-#define CGU_PLL1_CFG_DSMSEL             (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 28))
-#define CGU_PLL1_CFG_FRAC_EN            (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 27))
-#define CGU_PLL2_PHASE_DIVIDER_ENABLE   (ifxmips_r32(IFXMIPS_CGU_PLL2_CFG) & (1 << 20))
-#define CGU_PLL2_BYPASS                 (ifxmips_r32(IFXMIPS_CGU_PLL2_CFG) & (1 << 19))
-#define CGU_SYS_FPI_SEL                 (1 << 6)
-#define CGU_SYS_DDR_SEL                 0x3
-#define CGU_PLL0_SRC                    (1 << 29)
-
-#define CGU_PLL0_CFG_PLLK               GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 26, 17)
-#define CGU_PLL0_CFG_PLLN               GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 12, 6)
-#define CGU_PLL0_CFG_PLLM               GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 5, 2)
-#define CGU_PLL1_CFG_PLLK               GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 26, 17)
-#define CGU_PLL1_CFG_PLLN               GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 12, 6)
-#define CGU_PLL1_CFG_PLLM               GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 5, 2)
-#define CGU_PLL2_SRC                    GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 18, 17)
-#define CGU_PLL2_CFG_INPUT_DIV          GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 16, 13)
-#define CGU_PLL2_CFG_PLLN               GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 12, 6)
-#define CGU_PLL2_CFG_PLLM               GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 5, 2)
-#define CGU_IF_CLK_PCI_CLK              GET_BITS(*IFXMIPS_CGU_IF_CLK, 23, 20)
+#include <asm/mach-ifxmips/cgu.h>
 
 static unsigned int cgu_get_pll0_fdiv(void);
 unsigned int ifxmips_clocks[] = {CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
 
 static unsigned int cgu_get_pll0_fdiv(void);
 unsigned int ifxmips_clocks[] = {CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
@@ -185,14 +152,6 @@ unsigned int cgu_get_io_region_clock(void)
        }
 }
 
        }
 }
 
-unsigned int cgu_get_fpi_bus_clock(int fpi)
-{
-       unsigned int ret = cgu_get_io_region_clock();
-       if ((fpi == 2) && (ifxmips_r32(IFXMIPS_CGU_SYS) & CGU_SYS_FPI_SEL))
-               ret >>= 1;
-       return ret;
-}
-
 void cgu_setup_pci_clk(int external_clock)
 {
        /* set clock to 33Mhz */
 void cgu_setup_pci_clk(int external_clock)
 {
        /* set clock to 33Mhz */
@@ -200,7 +159,7 @@ void cgu_setup_pci_clk(int external_clock)
                IFXMIPS_CGU_IFCCR);
        ifxmips_w32(ifxmips_r32(IFXMIPS_CGU_IFCCR) | 0x800000,
                IFXMIPS_CGU_IFCCR);
                IFXMIPS_CGU_IFCCR);
        ifxmips_w32(ifxmips_r32(IFXMIPS_CGU_IFCCR) | 0x800000,
                IFXMIPS_CGU_IFCCR);
-       if (external_clock)     {
+       if (external_clock) {
                ifxmips_w32(ifxmips_r32(IFXMIPS_CGU_IFCCR) & ~(1 << 16),
                        IFXMIPS_CGU_IFCCR);
                ifxmips_w32((1 << 30), IFXMIPS_CGU_PCICR);
                ifxmips_w32(ifxmips_r32(IFXMIPS_CGU_IFCCR) & ~(1 << 16),
                        IFXMIPS_CGU_IFCCR);
                ifxmips_w32((1 << 30), IFXMIPS_CGU_PCICR);
@@ -211,6 +170,15 @@ void cgu_setup_pci_clk(int external_clock)
        }
 }
 
        }
 }
 
+unsigned int cgu_get_fpi_bus_clock(int fpi)
+{
+       unsigned int ret = cgu_get_io_region_clock();
+       if ((fpi == 2) && (ifxmips_r32(IFXMIPS_CGU_SYS) & CGU_SYS_FPI_SEL))
+               ret >>= 1;
+       return ret;
+}
+EXPORT_SYMBOL(cgu_get_fpi_bus_clock);
+
 unsigned int ifxmips_get_cpu_hz(void)
 {
        unsigned int ddr_clock = DDR_HZ;
 unsigned int ifxmips_get_cpu_hz(void)
 {
        unsigned int ddr_clock = DDR_HZ;
index e571862a4748285a52bb8ba7603da45a923c5e81..2ba0592f6d1e395593a3095da1f1261c86fddedc 100644 (file)
@@ -30,7 +30,7 @@
 #include <asm/ifxmips/ifxmips.h>
 #include <asm/ifxmips/ifxmips_irq.h>
 #include <asm/ifxmips/ifxmips_pmu.h>
 #include <asm/ifxmips/ifxmips.h>
 #include <asm/ifxmips/ifxmips_irq.h>
 #include <asm/ifxmips/ifxmips_pmu.h>
-#include <asm/ifxmips/ifxmips_cgu.h>
+#include <asm/mach-ifxmips/cgu.h>
 #include <asm/ifxmips/ifxmips_prom.h>
 
 static unsigned int r4k_offset;
 #include <asm/ifxmips/ifxmips_prom.h>
 
 static unsigned int r4k_offset;
index 8d8d431a852577c699e6c754d45db8b1ddeea889..d05df2283cf8313d95486fdd4a0a56207d2b4bbb 100644 (file)
@@ -15,7 +15,7 @@
 
 #include <asm/ifxmips/ifxmips.h>
 #include <asm/ifxmips/ifxmips_irq.h>
 
 #include <asm/ifxmips/ifxmips.h>
 #include <asm/ifxmips/ifxmips_irq.h>
-#include <asm/ifxmips/ifxmips_cgu.h>
+#include <asm/mach-ifxmips/cgu.h>
 #include <asm/ifxmips/ifxmips_gptu.h>
 #include <asm/ifxmips/ifxmips_pmu.h>
 
 #include <asm/ifxmips/ifxmips_gptu.h>
 #include <asm/ifxmips/ifxmips_pmu.h>
 
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_peripheral_definitions.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_peripheral_definitions.h
new file mode 100644 (file)
index 0000000..5bd788f
--- /dev/null
@@ -0,0 +1,119 @@
+//*************************************************************************
+//* Summary of definitions which are used in each peripheral              *
+//*************************************************************************
+
+#ifndef peripheral_definitions_h
+#define peripheral_definitions_h
+
+////#include "cpu.h"
+//
+///* These files have to be included by each peripheral */
+//#include <sysdefs.h>
+//#include <excep.h>
+//#include <cpusubsys.h>
+//#include <sys_api.h>
+//#include <mips.h>
+//#include "SRAM_address_map.h"
+//
+///* common header files for all CPU's */
+//#include "iiu.h"
+//#include "bcu.h"
+//#include "FPI_address_map.h"
+//#include "direct_interrupts.h"
+
+/////////////////////////////////////////////////////////////////////////
+
+//extern  int _clz();
+//extern void _nop();
+//extern void _sleep();
+//extern void sys_enable_int();
+
+typedef unsigned char UINT8;
+typedef signed char INT8;
+typedef unsigned short UINT16;
+typedef signed short INT16;
+typedef unsigned int UINT32;
+typedef signed int INT32;
+typedef unsigned long long UINT64;
+typedef signed long long INT64;
+
+#define REG8( addr )             (*(volatile UINT8 *) (addr))
+#define REG16( addr )            (*(volatile UINT16 *)(addr))
+#define REG32( addr )            (*(volatile UINT32 *)(addr))
+#define REG64( addr )            (*(volatile UINT64 *)(addr))
+
+/* define routine to set FPI access in Supervisor Mode */
+#define IFX_SUPERVISOR_ON()                         REG32(FB0_CFG) = 0x01
+/* Supervisor mode ends, following functions will be done in User mode */
+#define IFX_SUPERVISOR_OFF()                        REG32(FB0_CFG) = 0x00
+/* Supervisor mode ends, following functions will be done in User mode */
+#define IFX_SUPERVISOR_MODE()                       REG32(FB0_CFG)
+/* Supervisor mode ends, following functions will be done in User mode */
+#define IFX_SUPERVISOR_SET(svm)                     REG32(FB0_CFG) = svm
+/* enable all Interrupts in IIU */
+//#define IFX_ENABLE_IRQ(irq_mask, im_base)           REG32(im_base | IIU_MASK) = irq_mask
+///* get all high priority interrupt bits in IIU */
+//#define IFX_GET_IRQ_MASKED(im_base)                 REG32(im_base | IIU_IRMASKED)
+///* signal ends of interrupt to IIU */
+//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base)      REG32(im_base | IIU_IR) = irq_bit
+///* force IIU interrupt register */
+//#define IFX_FORCE_IIU_REGISTER(data, im_base)       REG32(im_base | IIU_IRDEBUG) = data
+///* get all bits of interrupt register */
+//#define IFX_GET_IRQ_UNMASKED(im_base)               REG32(im_base | IIU_IR)
+/* insert a NOP instruction */
+#define NOP                                     _nop()
+/* CPU goes to power down mode until interrupt occurs */
+#define IFX_CPU_SLEEP                               _sleep()
+/* enable all interrupts to CPU */
+#define IFX_CPU_ENABLE_ALL_INTERRUPT                sys_enable_int()
+/* get all low priority interrupt bits in peripheral */
+#define IFX_GET_LOW_PRIO_IRQ(int_reg)               REG32(int_reg)
+/* clear low priority interrupt bit in peripheral */
+#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg)    REG32(int_reg) = irq_bit
+/* write FPI bus */
+#define WRITE_FPI_BYTE(data, addr)              REG8(addr) = data
+#define WRITE_FPI_16BIT(data, addr)             REG16(addr) = data
+#define WRITE_FPI_32BIT(data, addr)             REG32(addr) = data
+/* read FPI bus */
+#define READ_FPI_BYTE(addr)                     REG8(addr)
+#define READ_FPI_16BIT(addr)                    REG16(addr)
+#define READ_FPI_32BIT(addr)                    REG32(addr)
+/* write peripheral register */
+#define WRITE_PERIPHERAL_REGISTER(data, addr)   REG32(addr) = data
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data
+#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data
+#else //not CONFIG_CPU_LITTLE_ENDIAN
+#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data
+#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data
+#endif //CONFIG_CPU_LITTLE_ENDIAN
+
+/* read peripheral register */
+#define READ_PERIPHERAL_REGISTER(addr)          REG32(addr)
+
+/* read/modify(or)/write peripheral register */
+#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data
+/* read/modify(and)/write peripheral register */
+#define RMW_AND_PERIPHERAL_REGISTER(data, addr)        REG32(addr) = REG32(addr) & (UINT32)data
+
+/* CPU-independent mnemonic constants */
+/* CLC register bits */
+#define IFX_CLC_ENABLE                0x00000000
+#define IFX_CLC_DISABLE               0x00000001
+#define IFX_CLC_DISABLE_STATUS        0x00000002
+#define IFX_CLC_SUSPEND_ENABLE        0x00000004
+#define IFX_CLC_CLOCK_OFF_DISABLE     0x00000008
+#define IFX_CLC_OVERWRITE_SPEN_FSOE   0x00000010
+#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020
+#define IFX_CLC_RUN_DIVIDER_MASK      0x0000FF00
+#define IFX_CLC_RUN_DIVIDER_OFFSET    8
+#define IFX_CLC_SLEEP_DIVIDER_MASK    0x00FF0000
+#define IFX_CLC_SLEEP_DIVIDER_OFFSET  16
+#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000
+#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24
+
+/* number of cycles to wait for interrupt service routine to be called */
+#define WAIT_CYCLES   50
+
+#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_ssc.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_ssc.h
new file mode 100644 (file)
index 0000000..c6dd5d4
--- /dev/null
@@ -0,0 +1,258 @@
+/*
+ * ifx_ssc.h defines some data sructures used in ifx_ssc.c
+ *
+ * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT)
+ *
+ *
+ */
+
+#ifndef __IFX_SSC_H
+#define __IFX_SSC_H
+#ifdef __KERNEL__
+#include <asm/ifxmips/ifx_ssc_defines.h>
+#endif //__KERNEL__
+
+#define PORT_CNT               1       // assume default value
+
+/* symbolic constants to be used in SSC routines */
+
+// ### TO DO: bad performance
+#define IFX_SSC_TXFIFO_ITL     1
+#define IFX_SSC_RXFIFO_ITL     1
+
+struct ifx_ssc_statistics {
+       unsigned int abortErr;  /* abort error */
+       unsigned int modeErr;   /* master/slave mode error */
+       unsigned int txOvErr;   /* TX Overflow error */
+       unsigned int txUnErr;   /* TX Underrun error */
+       unsigned int rxOvErr;   /* RX Overflow error */
+       unsigned int rxUnErr;   /* RX Underrun error */
+       unsigned int rxBytes;
+       unsigned int txBytes;
+};
+
+struct ifx_ssc_hwopts {
+       unsigned int AbortErrDetect:1;  /* Abort Error detection (in slave mode) */
+       unsigned int rxOvErrDetect:1;   /* Receive Overflow Error detection */
+       unsigned int rxUndErrDetect:1;  /* Receive Underflow Error detection */
+       unsigned int txOvErrDetect:1;   /* Transmit Overflow Error detection */
+       unsigned int txUndErrDetect:1;  /* Transmit Underflow Error detection */
+       unsigned int echoMode:1;        /* Echo mode */
+       unsigned int loopBack:1;        /* Loopback mode */
+       unsigned int idleValue:1;       /* Idle value */
+       unsigned int clockPolarity:1;   /* Idle clock is high or low */
+       unsigned int clockPhase:1;      /* Tx on trailing or leading edge */
+       unsigned int headingControl:1;  /* LSB first or MSB first */
+       unsigned int dataWidth:6;       /* from 2 up to 32 bits */
+       unsigned int masterSelect:1;    /* Master or Slave mode */
+       unsigned int modeRxTx:2;        /* rx/tx mode */
+       unsigned int gpoCs:8;   /* choose outputs to use for chip select */
+       unsigned int gpoInv:8;  /* invert GPO outputs */
+};
+
+struct ifx_ssc_frm_opts {
+       bool FrameEnable;       // SFCON.SFEN
+       unsigned int DataLength;        // SFCON.DLEN
+       unsigned int PauseLength;       // SFCON.PLEN
+       unsigned int IdleData;  // SFCON.IDAT
+       unsigned int IdleClock; // SFCON.ICLK
+       bool StopAfterPause;    // SFCON.STOP
+};
+
+struct ifx_ssc_frm_status {
+       bool DataBusy;          // SFSTAT.DBSY
+       bool PauseBusy;         // SFSTAT.PBSY
+       unsigned int DataCount; // SFSTAT.DCNT
+       unsigned int PauseCount;        // SFSTAT.PCNT
+       bool EnIntAfterData;    // SFCON.IBEN
+       bool EnIntAfterPause;   // SFCON.IAEN
+};
+
+typedef struct {
+       char *buf;
+       size_t len;
+} ifx_ssc_buf_item_t;
+
+// data structures for batch execution
+typedef union {
+       struct {
+               bool save_options;
+       } init;
+       ifx_ssc_buf_item_t read;
+       ifx_ssc_buf_item_t write;
+       ifx_ssc_buf_item_t rd_wr;
+       unsigned int set_baudrate;
+       struct ifx_ssc_frm_opts set_frm;
+       unsigned int set_gpo;
+       struct ifx_ssc_hwopts set_hwopts;
+} ifx_ssc_batch_cmd_param;
+
+struct ifx_ssc_batch_list {
+       unsigned int cmd;
+       ifx_ssc_batch_cmd_param cmd_param;
+       struct ifx_ssc_batch_list *next;
+};
+
+#ifdef __KERNEL__
+#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE)
+
+struct ifx_ssc_port {
+       unsigned long mapbase;
+       struct ifx_ssc_hwopts opts;
+       struct ifx_ssc_statistics stats;
+       struct ifx_ssc_frm_status frm_status;
+       struct ifx_ssc_frm_opts frm_opts;
+       /* wait queue for ifx_ssc_read() */
+       wait_queue_head_t rwait, pwait;
+       int port_nr;
+       char port_is_open;      /* exclusive open  - boolean */
+//      int no_of_bits; /* number of _valid_ bits */
+//      int elem_size; /* shift for element (no of bytes)*/
+       /* buffer and pointers to the read/write position */
+       char *rxbuf;            /* buffer for RX */
+       char *rxbuf_end;        /* buffer end pointer for RX */
+       volatile char *rxbuf_ptr;       /* buffer write pointer for RX */
+       char *txbuf;            /* buffer for TX */
+       char *txbuf_end;        /* buffer end pointer for TX */
+       volatile char *txbuf_ptr;       /* buffer read pointer for TX */
+       unsigned int baud;
+       /* each channel has its own interrupts */
+       /* (transmit/receive/error/frame) */
+       unsigned int txirq, rxirq, errirq, frmirq;
+};
+/* default values for SSC configuration */
+// values of CON
+#define IFX_SSC_DEF_IDLE_DATA       1  /* enable */
+#define IFX_SSC_DEF_BYTE_VALID_CTL  1  /* enable */
+#define IFX_SSC_DEF_DATA_WIDTH      32 /* bits */
+#define IFX_SSC_DEF_ABRT_ERR_DETECT 0  /* disable */
+#define IFX_SSC_DEF_RO_ERR_DETECT   1  /* enable */
+#define IFX_SSC_DEF_RU_ERR_DETECT   0  /* disable */
+#define IFX_SSC_DEF_TO_ERR_DETECT   0  /* disable */
+#define IFX_SSC_DEF_TU_ERR_DETECT   0  /* disable */
+#define IFX_SSC_DEF_LOOP_BACK       0  /* disable */
+#define IFX_SSC_DEF_ECHO_MODE       0  /* disable */
+#define IFX_SSC_DEF_CLOCK_POLARITY  0  /* low */
+#define IFX_SSC_DEF_CLOCK_PHASE     1  /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */
+#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST
+#define IFX_SSC_DEF_MODE_RXTX      IFX_SSC_MODE_RXTX
+// other values
+#define IFX_SSC_DEF_MASTERSLAVE            IFX_SSC_MASTER_MODE /* master */
+#ifdef CONFIG_USE_EMULATOR
+#define IFX_SSC_DEF_BAUDRATE       10000
+#else
+#define IFX_SSC_DEF_BAUDRATE       2000000
+#endif
+#define IFX_SSC_DEF_RMC                    0x10
+
+#define IFX_SSC_DEF_TXFIFO_FL       8
+#define IFX_SSC_DEF_RXFIFO_FL       1
+
+#if 1                          //TODO
+#define IFX_SSC_DEF_GPO_CS         0x3 /* no chip select */
+#define IFX_SSC_DEF_GPO_INV        0   /* no chip select */
+#else
+#error "what is ur Chip Select???"
+#endif
+#define IFX_SSC_DEF_SFCON          0   /* no serial framing */
+#if 0
+#define IFX_SSC_DEF_IRNEN          IFX_SSC_T_BIT | /* enable all int's */\
+                                   IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT
+#endif
+#define IFX_SSC_DEF_IRNEN          IFX_SSC_T_BIT | /* enable all int's */\
+                                   IFX_SSC_R_BIT | IFX_SSC_E_BIT
+#endif /* __KERNEL__ */
+
+// batch execution commands
+#define IFX_SSC_BATCH_CMD_INIT         1
+#define IFX_SSC_BATCH_CMD_READ         2
+#define IFX_SSC_BATCH_CMD_WRITE                3
+#define IFX_SSC_BATCH_CMD_RD_WR                4
+#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5
+#define IFX_SSC_BATCH_CMD_SET_HWOPTS   6
+#define IFX_SSC_BATCH_CMD_SET_FRM      7
+#define IFX_SSC_BATCH_CMD_SET_GPO      8
+#define IFX_SSC_BATCH_CMD_FIFO_FLUSH   9
+//#define IFX_SSC_BATCH_CMD_    
+//#define IFX_SSC_BATCH_CMD_    
+#define IFX_SSC_BATCH_CMD_END_EXEC     0
+
+/* Macros to configure SSC hardware */
+/* headingControl: */
+#define IFX_SSC_LSB_FIRST            0
+#define IFX_SSC_MSB_FIRST            1
+/* dataWidth: */
+#define IFX_SSC_MIN_DATA_WIDTH       2
+#define IFX_SSC_MAX_DATA_WIDTH       32
+/* master/slave mode select */
+#define IFX_SSC_MASTER_MODE          1
+#define IFX_SSC_SLAVE_MODE           0
+/* rx/tx mode */
+// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h
+#define IFX_SSC_MODE_RXTX           0
+#define IFX_SSC_MODE_RX                     1
+#define IFX_SSC_MODE_TX                     2
+#define IFX_SSC_MODE_OFF            3
+#define IFX_SSC_MODE_MASK           IFX_SSC_MODE_RX | IFX_SSC_MODE_TX
+
+/* GPO values */
+#define IFX_SSC_MAX_GPO_OUT         7
+
+#define IFX_SSC_RXREQ_BLOCK_SIZE     32768
+
+/***********************/
+/* defines for ioctl's */
+/***********************/
+#define IFX_SSC_IOCTL_MAGIC     'S'
+/* read out the statistics */
+#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics)
+/* clear the statistics */
+#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2)
+/* set the baudrate */
+#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int)
+/* get the current baudrate */
+#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int)
+/* set hardware options */
+#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts)
+/* get the current hardware options */
+#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts)
+/* set transmission mode */
+#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int)
+/* get the current transmission mode */
+#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int)
+/* abort transmission */
+#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9)
+#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9)
+
+/* set general purpose outputs */
+#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int)
+/* clear general purpose outputs */
+#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int)
+/* get general purpose outputs */
+#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int)
+
+/*** serial framing ***/
+/* get status of serial framing */
+#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status)
+/* get counter reload values and control bits */
+#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts)
+/* set counter reload values and control bits */
+#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts)
+
+/*** batch execution ***/
+/* do batch execution */
+#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list)
+
+#ifdef __KERNEL__
+// routines from ifx_ssc.c
+// ### TO DO
+/* kernel interface for read and write */
+ssize_t ifx_ssc_kread (int, char *, size_t);
+ssize_t ifx_ssc_kwrite (int, const char *, size_t);
+
+#ifdef CONFIG_IFX_VP_KERNEL_TEST
+void ifx_ssc_tc (void);
+#endif // CONFIG_IFX_VP_KERNEL_TEST
+
+#endif //__KERNEL__
+#endif // __IFX_SSC_H
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_ssc_defines.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifx_ssc_defines.h
new file mode 100644 (file)
index 0000000..805d48a
--- /dev/null
@@ -0,0 +1,547 @@
+#ifndef IFX_SSC_DEFINES_H
+#define IFX_SSC_DEFINES_H
+
+#include "ifx_peripheral_definitions.h"
+
+/* maximum SSC FIFO size */
+#define IFX_SSC_MAX_FIFO_SIZE 32
+
+/* register map of SSC  */
+
+/* address of the Clock Control Register of the SSC */
+#define IFX_SSC_CLC                 0x00000000
+/* IFX_SSC_CLC register is significant in bits 23 downto 8 and in bits 5, 3, 2, 0  
+   bit 1 is hardware modified*/
+#define IFX_SSC_CLC_readmask  0x00FFFFEF
+#define IFX_SSC_CLC_writemask 0x00FFFF3D
+#define IFX_SSC_CLC_hwmask    0x00000002
+#define IFX_SSC_CLC_dontcare (IFX_SSC_CLC_readmask & IFX_SSC_CLC_writemask & ~IFX_SSC_CLC_hwmask)
+
+/* address of Port Input Select Register of the SSC */
+#define IFX_SSC_PISEL 0x00000004
+/* IFX_SSC_PISEL register is significant in lowest three bits only */
+#define IFX_SSC_PISEL_readmask  0x00000007
+#define IFX_SSC_PISEL_writemask 0x00000007
+#define IFX_SSC_PISEL_hwmask    0x00000000
+#define IFX_SSC_PISEL_dontcare (IFX_SSC_PISEL_readmask & IFX_SSC_PISEL_writemask & ~IFX_SSC_PISEL_hwmask)
+
+/* address of Identification Register of the SSC */
+#define IFX_SSC_ID 0x00000008
+/* IFX_SSC_ID register is significant in no bit */
+#define IFX_SSC_ID_readmask  0x0000FF3F
+#define IFX_SSC_ID_writemask 0x00000000
+#define IFX_SSC_ID_hwmask    0x00000000
+#define IFX_SSC_ID_dontcare (IFX_SSC_ID_readmask & IFX_SSC_ID_writemask & ~IFX_SSC_ID_hwmask)
+
+/* address of the Control Register of the SSC */
+#define IFX_SSC_CON            0x00000010
+/* IFX_SSC_CON register is significant in bits 23:22, 20:16 and 12:0 */
+#define IFX_SSC_CON_readmask  0x01DF1FFF
+#define IFX_SSC_CON_writemask 0x01DF1FFF
+#define IFX_SSC_CON_hwmask    0x00000000
+#define IFX_SSC_CON_dontcare (IFX_SSC_CON_readmask & IFX_SSC_CON_writemask & ~IFX_SSC_CON_hwmask)
+
+/* address of the Status Register of the SSC */
+#define IFX_SSC_STATE          0x00000014
+/* IFX_SSC_STATE register is readable in bits 30:28, 26:24, 20:16, 12:7 and 2:0
+   all bits except 1:0 are hardware modified */
+#define IFX_SSC_STATE_readmask  0x771F3F87
+#define IFX_SSC_STATE_writemask 0x00000000
+#define IFX_SSC_STATE_hwmask    0x771F3F84
+#define IFX_SSC_STATE_dontcare (IFX_SSC_STATE_readmask & IFX_SSC_STATE_writemask & ~IFX_SSC_STATE_hwmask)
+
+/* address of the Write Hardware Modified Control Register Bits of the SSC */
+#define IFX_SSC_WHBSTATE            0x00000018
+/* IFX_SSC_WHBSTATE register is write only */
+#define IFX_SSC_WHBSTATE_readmask  0x00000000
+#define IFX_SSC_WHBSTATE_writemask 0x0000FFFF
+#define IFX_SSC_WHBSTATE_hwmask    0x00000000
+#define IFX_SSC_WHBSTATE_dontcare (IFX_SSC_WHBSTATE_readmask & IFX_SSC_WHBSTATE_writemask & ~IFX_SSC_WHBSTATE_hwmask)
+
+/* address of the Baudrate Timer Reload Register of the SSC */
+#define IFX_SSC_BR              0x00000040
+/* IFX_SSC_BR register is significant in  bit 15 downto 0*/
+#define IFX_SSC_BR_readmask  0x0000FFFF
+#define IFX_SSC_BR_writemask 0x0000FFFF
+#define IFX_SSC_BR_hwmask    0x00000000
+#define IFX_SSC_BR_dontcare (IFX_SSC_BR_readmask & IFX_SSC_BR_writemask & ~IFX_SSC_BR_hwmask)
+
+/* address of the Baudrate Timer Status Register of the SSC */
+#define IFX_SSC_BRSTAT              0x00000044
+/* IFX_SSC_BRSTAT register is significant in  bit 15 downto 0*/
+#define IFX_SSC_BRSTAT_readmask  0x0000FFFF
+#define IFX_SSC_BRSTAT_writemask 0x00000000
+#define IFX_SSC_BRSTAT_hwmask    0x0000FFFF
+#define IFX_SSC_BRSTAT_dontcare (IFX_SSC_BRSTAT_readmask & IFX_SSC_BRSTAT_writemask & ~IFX_SSC_BRSTAT_hwmask)
+
+/* address of the Transmitter Buffer Register of the SSC */
+#define IFX_SSC_TB              0x00000020
+/* IFX_SSC_TB register is significant in  bit 31 downto 0*/
+#define IFX_SSC_TB_readmask  0xFFFFFFFF
+#define IFX_SSC_TB_writemask 0xFFFFFFFF
+#define IFX_SSC_TB_hwmask    0x00000000
+#define IFX_SSC_TB_dontcare (IFX_SSC_TB_readmask & IFX_SSC_TB_writemask & ~IFX_SSC_TB_hwmask)
+
+/* address of the Reciver Buffer Register of the SSC */
+#define IFX_SSC_RB              0x00000024
+/* IFX_SSC_RB register is significant in no bits*/
+#define IFX_SSC_RB_readmask  0xFFFFFFFF
+#define IFX_SSC_RB_writemask 0x00000000
+#define IFX_SSC_RB_hwmask    0xFFFFFFFF
+#define IFX_SSC_RB_dontcare (IFX_SSC_RB_readmask & IFX_SSC_RB_writemask & ~IFX_SSC_RB_hwmask)
+
+/* address of the Receive FIFO Control Register of the SSC */
+#define IFX_SSC_RXFCON              0x00000030
+/* IFX_SSC_RXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
+#define IFX_SSC_RXFCON_readmask  0x00003F03
+#define IFX_SSC_RXFCON_writemask 0x00003F03
+#define IFX_SSC_RXFCON_hwmask    0x00000000
+#define IFX_SSC_RXFCON_dontcare (IFX_SSC_RXFCON_readmask & IFX_SSC_RXFCON_writemask & ~IFX_SSC_RXFCON_hwmask)
+
+/* address of the Transmit FIFO Control Register of the SSC */
+#define IFX_SSC_TXFCON              0x00000034
+/* IFX_SSC_TXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
+#define IFX_SSC_TXFCON_readmask  0x00003F03
+#define IFX_SSC_TXFCON_writemask 0x00003F03
+#define IFX_SSC_TXFCON_hwmask    0x00000000
+#define IFX_SSC_TXFCON_dontcare (IFX_SSC_TXFCON_readmask & IFX_SSC_TXFCON_writemask & ~IFX_SSC_TXFCON_hwmask)
+
+/* address of the FIFO Status Register of the SSC */
+#define IFX_SSC_FSTAT               0x00000038
+/* IFX_SSC_FSTAT register is significant in no bit*/
+#define IFX_SSC_FSTAT_readmask  0x00003F3F
+#define IFX_SSC_FSTAT_writemask 0x00000000
+#define IFX_SSC_FSTAT_hwmask    0x00003F3F
+#define IFX_SSC_FSTAT_dontcare (IFX_SSC_FSTAT_readmask & IFX_SSC_FSTAT_writemask & ~IFX_SSC_FSTAT_hwmask)
+
+/* address of the Data Frame Control register of the SSC */
+#define IFX_SSC_SFCON               0x00000060
+#define IFX_SSC_SFCON_readmask  0xFFDFFFFD
+#define IFX_SSC_SFCON_writemask 0xFFDFFFFD
+#define IFX_SSC_SFCON_hwmask    0x00000000
+#define IFX_SSC_SFCON_dontcare (IFX_SSC_SFCON_readmask & IFX_SSC_SFCON_writemask & ~IFX_SSC_SFCON_hwmask)
+
+/* address of the Data Frame Status register of the SSC */
+#define IFX_SSC_SFSTAT               0x00000064
+#define IFX_SSC_SFSTAT_readmask  0xFFC0FFF3
+#define IFX_SSC_SFSTAT_writemask 0x00000000
+#define IFX_SSC_SFSTAT_hwmask    0xFFC0FFF3
+#define IFX_SSC_SFSTAT_dontcare (IFX_SSC_SFSTAT_readmask & IFX_SSC_SFSTAT_writemask & ~IFX_SSC_SFSTAT_hwmask)
+
+/* address of the General Purpose Output Control register of the SSC */
+#define IFX_SSC_GPOCON               0x00000070
+#define IFX_SSC_GPOCON_readmask  0x0000FFFF
+#define IFX_SSC_GPOCON_writemask 0x0000FFFF
+#define IFX_SSC_GPOCON_hwmask    0x00000000
+#define IFX_SSC_GPOCON_dontcare (IFX_SSC_GPOCON_readmask & IFX_SSC_GPOCON_writemask & ~IFX_SSC_GPOCON_hwmask)
+
+/* address of the General Purpose Output Status register of the SSC */
+#define IFX_SSC_GPOSTAT               0x00000074
+#define IFX_SSC_GPOSTAT_readmask  0x000000FF
+#define IFX_SSC_GPOSTAT_writemask 0x00000000
+#define IFX_SSC_GPOSTAT_hwmask    0x00000000
+#define IFX_SSC_GPOSTAT_dontcare (IFX_SSC_GPOSTAT_readmask & IFX_SSC_GPOSTAT_writemask & ~IFX_SSC_GPOSTAT_hwmask)
+
+/* address of the Force GPO Status register of the SSC */
+#define IFX_SSC_WHBGPOSTAT               0x00000078
+#define IFX_SSC_WHBGPOSTAT_readmask  0x00000000
+#define IFX_SSC_WHBGPOSTAT_writemask 0x0000FFFF
+#define IFX_SSC_WHBGPOSTAT_hwmask    0x00000000
+#define IFX_SSC_WHBGPOSTAT_dontcare (IFX_SSC_WHBGPOSTAT_readmask & IFX_SSC_WHBGPOSTAT_writemask & ~IFX_SSC_WHBGPOSTAT_hwmask)
+
+/* address of the Receive Request Register of the SSC */
+#define IFX_SSC_RXREQ               0x00000080
+#define IFX_SSC_RXREQ_readmask  0x0000FFFF
+#define IFX_SSC_RXREQ_writemask 0x0000FFFF
+#define IFX_SSC_RXREQ_hwmask    0x00000000
+#define IFX_SSC_RXREQ_dontcare (IFX_SSC_RXREQ_readmask & IFX_SSC_RXREQ_writemask & ~IFX_SSC_RXREQ_hwmask)
+
+/* address of the Receive Count Register of the SSC */
+#define IFX_SSC_RXCNT               0x00000084
+#define IFX_SSC_RXCNT_readmask  0x0000FFFF
+#define IFX_SSC_RXCNT_writemask 0x00000000
+#define IFX_SSC_RXCNT_hwmask    0x0000FFFF
+#define IFX_SSC_RXCNT_dontcare (IFX_SSC_RXCNT_readmask & IFX_SSC_RXCNT_writemask & ~IFX_SSC_RXCNT_hwmask)
+
+/* address of the DMA Configuration Register of the SSC */
+#define IFX_SSC_DMACON               0x000000EC
+#define IFX_SSC_DMACON_readmask  0x0000FFFF
+#define IFX_SSC_DMACON_writemask 0x00000000
+#define IFX_SSC_DMACON_hwmask    0x0000FFFF
+#define IFX_SSC_DMACON_dontcare (IFX_SSC_DMACON_readmask & IFX_SSC_DMACON_writemask & ~IFX_SSC_DMACON_hwmask)
+
+//------------------------------------------------------
+// interrupt register for enabling interrupts, mask register of irq_reg
+#define IFX_SSC_IRN_EN 0xF4
+// read/write
+#define IFX_SSC_IRN_EN_readmask  0x0000000F
+#define IFX_SSC_IRN_EN_writemask 0x0000000F
+#define IFX_SSC_IRN_EN_hwmask    0x00000000
+#define IFX_SSC_IRN_EN_dontcare  (IFX_SSC_IRN_EN_readmask & IFX_SSC_IRN_EN_writemask & ~IFX_SSC_IRN_EN_hwmask)
+
+// interrupt register for accessing interrupts
+#define IFX_SSC_IRN_CR                0xF8
+// read/write
+#define IFX_SSC_IRN_CR_readmask  0x0000000F
+#define IFX_SSC_IRN_CR_writemask 0x0000000F
+#define IFX_SSC_IRN_CR_hwmask    0x0000000F
+#define IFX_SSC_IRN_CR_dontcare  (IFX_SSC_IRN_CR_readmask & IFX_SSC_IRN_CR_writemask & ~IFX_SSC_IRN_CR_hwmask)
+
+// interrupt register for stimulating interrupts
+#define IFX_SSC_IRN_ICR                  0xFC
+// read/write
+#define IFX_SSC_IRN_ICR_readmask  0x0000000F
+#define IFX_SSC_IRN_ICR_writemask 0x0000000F
+#define IFX_SSC_IRN_ICR_hwmask    0x00000000
+#define IFX_SSC_IRN_ICR_dontcare  (IFX_SSC_IRN_ICR_readmask & IFX_SSC_IRN_ICR_writemask & ~IFX_SSC_IRN_ICR_hwmask)
+
+//---------------------------------------------------------------------
+// Number of IRQs and bitposition of IRQ
+#define IFX_SSC_NUM_IRQ           4
+#define IFX_SSC_T_BIT       0x00000001
+#define IFX_SSC_R_BIT       0x00000002
+#define IFX_SSC_E_BIT       0x00000004
+#define IFX_SSC_F_BIT       0x00000008
+
+/* bit masks for SSC registers */
+
+/* ID register */
+#define IFX_SSC_PERID_REV_MASK      0x0000001F
+#define IFX_SSC_PERID_CFG_MASK      0x00000020
+#define IFX_SSC_PERID_ID_MASK       0x0000FF00
+#define IFX_SSC_PERID_REV_OFFSET    0
+#define IFX_SSC_PERID_CFG_OFFSET    5
+#define IFX_SSC_PERID_ID_OFFSET     8
+#define IFX_SSC_PERID_ID            0x45
+#define IFX_SSC_PERID_DMA_ON        0x00000020
+#define IFX_SSC_PERID_RXFS_MASK     0x003F0000
+#define IFX_SSC_PERID_RXFS_OFFSET   16
+#define IFX_SSC_PERID_TXFS_MASK     0x3F000000
+#define IFX_SSC_PERID_TXFS_OFFSET   24
+
+/* PISEL register */
+#define IFX_SSC_PISEL_MASTER_IN_A       0x0000
+#define IFX_SSC_PISEL_MASTER_IN_B       0x0001
+#define IFX_SSC_PISEL_SLAVE_IN_A        0x0000
+#define IFX_SSC_PISEL_SLAVE_IN_B        0x0002
+#define IFX_SSC_PISEL_CLOCK_IN_A        0x0000
+#define IFX_SSC_PISEL_CLOCK_IN_B        0x0004
+
+/* IFX_SSC_CON register */
+#define IFX_SSC_CON_ECHO_MODE_ON       0x01000000
+#define IFX_SSC_CON_ECHO_MODE_OFF      0x00000000
+#define IFX_SSC_CON_IDLE_HIGH          0x00800000
+#define IFX_SSC_CON_IDLE_LOW           0x00000000
+#define IFX_SSC_CON_ENABLE_BYTE_VALID  0x00400000
+#define IFX_SSC_CON_DISABLE_BYTE_VALID 0x00000000
+#define IFX_SSC_CON_DATA_WIDTH_OFFSET  16
+#define IFX_SSC_CON_DATA_WIDTH_MASK    0x001F0000
+#define IFX_SSC_ENCODE_DATA_WIDTH(width) (((width - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET) & IFX_SSC_CON_DATA_WIDTH_MASK)
+
+#define IFX_SSC_CON_RESET_ON_BAUDERR   0x00002000
+#define IFX_SSC_CON_GO_ON_ON_BAUDERR   0x00000000
+
+#define IFX_SSC_CON_RX_UFL_CHECK       0x00001000
+#define IFX_SSC_CON_RX_UFL_IGNORE      0x00000000
+#define IFX_SSC_CON_TX_UFL_CHECK       0x00000800
+#define IFX_SSC_CON_TX_UFL_IGNORE      0x00000000
+#define IFX_SSC_CON_ABORT_ERR_CHECK    0x00000400
+#define IFX_SSC_CON_ABORT_ERR_IGNORE   0x00000000
+#define IFX_SSC_CON_RX_OFL_CHECK       0x00000200
+#define IFX_SSC_CON_RX_OFL_IGNORE      0x00000000
+#define IFX_SSC_CON_TX_OFL_CHECK       0x00000100
+#define IFX_SSC_CON_TX_OFL_IGNORE      0x00000000
+#define IFX_SSC_CON_ALL_ERR_CHECK      0x00001F00
+#define IFX_SSC_CON_ALL_ERR_IGNORE     0x00000000
+
+#define IFX_SSC_CON_LOOPBACK_MODE      0x00000080
+#define IFX_SSC_CON_NO_LOOPBACK        0x00000000
+#define IFX_SSC_CON_HALF_DUPLEX        0x00000080
+#define IFX_SSC_CON_FULL_DUPLEX        0x00000000
+#define IFX_SSC_CON_CLOCK_FALL         0x00000040
+#define IFX_SSC_CON_CLOCK_RISE         0x00000000
+#define IFX_SSC_CON_SHIFT_THEN_LATCH   0x00000000
+#define IFX_SSC_CON_LATCH_THEN_SHIFT   0x00000020
+#define IFX_SSC_CON_MSB_FIRST          0x00000010
+#define IFX_SSC_CON_LSB_FIRST          0x00000000
+#define IFX_SSC_CON_ENABLE_CSB         0x00000008
+#define IFX_SSC_CON_DISABLE_CSB        0x00000000
+#define IFX_SSC_CON_INVERT_CSB         0x00000004
+#define IFX_SSC_CON_TRUE_CSB           0x00000000
+#define IFX_SSC_CON_RX_OFF             0x00000002
+#define IFX_SSC_CON_RX_ON              0x00000000
+#define IFX_SSC_CON_TX_OFF             0x00000001
+#define IFX_SSC_CON_TX_ON              0x00000000
+
+/* IFX_SSC_STATE register */
+#define IFX_SSC_STATE_RX_BYTE_VALID_OFFSET 28
+#define IFX_SSC_STATE_RX_BYTE_VALID_MASK   0x70000000
+#define IFX_SSC_DECODE_RX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET)
+#define IFX_SSC_STATE_TX_BYTE_VALID_OFFSET 24
+#define IFX_SSC_STATE_TX_BYTE_VALID_MASK   0x07000000
+#define IFX_SSC_DECODE_TX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_TX_BYTE_VALID_MASK) >> IFX_SSC_STATE_TX_BYTE_VALID_OFFSET)
+#define IFX_SSC_STATE_BIT_COUNT_OFFSET     16
+#define IFX_SSC_STATE_BIT_COUNT_MASK       0x001F0000
+#define IFX_SSC_DECODE_DATA_WIDTH(con_state) (((con_state & IFX_SSC_STATE_BIT_COUNT_MASK) >> IFX_SSC_STATE_BIT_COUNT_OFFSET) + 1)
+#define IFX_SSC_STATE_BUSY                 0x00002000
+#define IFX_SSC_STATE_RX_UFL               0x00001000
+#define IFX_SSC_STATE_TX_UFL               0x00000800
+#define IFX_SSC_STATE_ABORT_ERR            0x00000400
+#define IFX_SSC_STATE_RX_OFL               0x00000200
+#define IFX_SSC_STATE_TX_OFL               0x00000100
+#define IFX_SSC_STATE_MODE_ERR             0x00000080
+#define IFX_SSC_STATE_SLAVE_IS_SELECTED    0x00000004
+#define IFX_SSC_STATE_IS_MASTER            0x00000002
+#define IFX_SSC_STATE_IS_ENABLED           0x00000001
+
+/* WHBSTATE register */
+#define IFX_SSC_WHBSTATE_DISABLE_SSC        0x0001
+#define IFX_SSC_WHBSTATE_CONFIGURATION_MODE 0x0001
+#define IFX_SSC_WHBSTATE_CLR_ENABLE         0x0001
+
+#define IFX_SSC_WHBSTATE_ENABLE_SSC         0x0002
+#define IFX_SSC_WHBSTATE_RUN_MODE           0x0002
+#define IFX_SSC_WHBSTATE_SET_ENABLE         0x0002
+
+#define IFX_SSC_WHBSTATE_SLAVE_MODE         0x0004
+#define IFX_SSC_WHBSTATE_CLR_MASTER_SELECT  0x0004
+
+#define IFX_SSC_WHBSTATE_MASTER_MODE        0x0008
+#define IFX_SSC_WHBSTATE_SET_MASTER_SELECT  0x0008
+
+#define IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR   0x0010
+#define IFX_SSC_WHBSTATE_SET_RX_UFL_ERROR   0x0020
+
+#define IFX_SSC_WHBSTATE_CLR_MODE_ERROR     0x0040
+#define IFX_SSC_WHBSTATE_SET_MODE_ERROR     0x0080
+
+#define IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR   0x0100
+#define IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR   0x0200
+#define IFX_SSC_WHBSTATE_CLR_ABORT_ERROR    0x0400
+#define IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR   0x0800
+#define IFX_SSC_WHBSTATE_SET_TX_OFL_ERROR   0x1000
+#define IFX_SSC_WHBSTATE_SET_RX_OFL_ERROR   0x2000
+#define IFX_SSC_WHBSTATE_SET_ABORT_ERROR    0x4000
+#define IFX_SSC_WHBSTATE_SET_TX_UFL_ERROR   0x8000
+#define IFX_SSC_WHBSTATE_CLR_ALL_ERROR      0x0F50
+#define IFX_SSC_WHBSTATE_SET_ALL_ERROR      0xF0A0
+
+/* BR register */
+#define IFX_SSC_BR_BAUDRATE_OFFSET      0
+#define IFX_SSC_BR_BAUDRATE_MASK        0xFFFF
+
+/* BR_STAT register */
+#define IFX_SSC_BRSTAT_BAUDTIMER_OFFSET      0
+#define IFX_SSC_BRSTAT_BAUDTIMER_MASK        0xFFFF
+
+/* TB register */
+#define IFX_SSC_TB_DATA_OFFSET      0
+#define IFX_SSC_TB_DATA_MASK        0xFFFFFFFF
+
+/* RB register */
+#define IFX_SSC_RB_DATA_OFFSET      0
+#define IFX_SSC_RB_DATA_MASK        0xFFFFFFFF
+
+/* RXFCON and TXFCON registers */
+#define IFX_SSC_XFCON_FIFO_DISABLE      0x0000
+#define IFX_SSC_XFCON_FIFO_ENABLE       0x0001
+#define IFX_SSC_XFCON_FIFO_FLUSH        0x0002
+#define IFX_SSC_XFCON_ITL_MASK          0x00003F00
+#define IFX_SSC_XFCON_ITL_OFFSET        8
+
+/* FSTAT register */
+#define IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET  0
+#define IFX_SSC_FSTAT_RECEIVED_WORDS_MASK    0x003F
+#define IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET  8
+#define IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK    0x3F00
+
+/* GPOCON register */
+#define IFX_SSC_GPOCON_INVOUT0_POS      0
+#define IFX_SSC_GPOCON_INV_OUT0         0x00000001
+#define IFX_SSC_GPOCON_TRUE_OUT0        0x00000000
+#define IFX_SSC_GPOCON_INVOUT1_POS      1
+#define IFX_SSC_GPOCON_INV_OUT1         0x00000002
+#define IFX_SSC_GPOCON_TRUE_OUT1        0x00000000
+#define IFX_SSC_GPOCON_INVOUT2_POS      2
+#define IFX_SSC_GPOCON_INV_OUT2         0x00000003
+#define IFX_SSC_GPOCON_TRUE_OUT2        0x00000000
+#define IFX_SSC_GPOCON_INVOUT3_POS      3
+#define IFX_SSC_GPOCON_INV_OUT3         0x00000008
+#define IFX_SSC_GPOCON_TRUE_OUT3        0x00000000
+#define IFX_SSC_GPOCON_INVOUT4_POS      4
+#define IFX_SSC_GPOCON_INV_OUT4         0x00000010
+#define IFX_SSC_GPOCON_TRUE_OUT4        0x00000000
+#define IFX_SSC_GPOCON_INVOUT5_POS      5
+#define IFX_SSC_GPOCON_INV_OUT5         0x00000020
+#define IFX_SSC_GPOCON_TRUE_OUT5        0x00000000
+#define IFX_SSC_GPOCON_INVOUT6_POS      6
+#define IFX_SSC_GPOCON_INV_OUT6         0x00000040
+#define IFX_SSC_GPOCON_TRUE_OUT6        0x00000000
+#define IFX_SSC_GPOCON_INVOUT7_POS      7
+#define IFX_SSC_GPOCON_INV_OUT7         0x00000080
+#define IFX_SSC_GPOCON_TRUE_OUT7        0x00000000
+#define IFX_SSC_GPOCON_INV_OUT_ALL      0x000000FF
+#define IFX_SSC_GPOCON_TRUE_OUT_ALL     0x00000000
+
+#define IFX_SSC_GPOCON_ISCSB0_POS       8
+#define IFX_SSC_GPOCON_IS_CSB0          0x00000100
+#define IFX_SSC_GPOCON_IS_GPO0          0x00000000
+#define IFX_SSC_GPOCON_ISCSB1_POS       9
+#define IFX_SSC_GPOCON_IS_CSB1          0x00000200
+#define IFX_SSC_GPOCON_IS_GPO1          0x00000000
+#define IFX_SSC_GPOCON_ISCSB2_POS       10
+#define IFX_SSC_GPOCON_IS_CSB2          0x00000400
+#define IFX_SSC_GPOCON_IS_GPO2          0x00000000
+#define IFX_SSC_GPOCON_ISCSB3_POS       11
+#define IFX_SSC_GPOCON_IS_CSB3          0x00000800
+#define IFX_SSC_GPOCON_IS_GPO3          0x00000000
+#define IFX_SSC_GPOCON_ISCSB4_POS       12
+#define IFX_SSC_GPOCON_IS_CSB4          0x00001000
+#define IFX_SSC_GPOCON_IS_GPO4          0x00000000
+#define IFX_SSC_GPOCON_ISCSB5_POS       13
+#define IFX_SSC_GPOCON_IS_CSB5          0x00002000
+#define IFX_SSC_GPOCON_IS_GPO5          0x00000000
+#define IFX_SSC_GPOCON_ISCSB6_POS       14
+#define IFX_SSC_GPOCON_IS_CSB6          0x00004000
+#define IFX_SSC_GPOCON_IS_GPO6          0x00000000
+#define IFX_SSC_GPOCON_ISCSB7_POS       15
+#define IFX_SSC_GPOCON_IS_CSB7          0x00008000
+#define IFX_SSC_GPOCON_IS_GPO7          0x00000000
+#define IFX_SSC_GPOCON_IS_CSB_ALL       0x0000FF00
+#define IFX_SSC_GPOCON_IS_GPO_ALL       0x00000000
+
+/* GPOSTAT register */
+#define IFX_SSC_GPOSTAT_OUT0            0x00000001
+#define IFX_SSC_GPOSTAT_OUT1            0x00000002
+#define IFX_SSC_GPOSTAT_OUT2            0x00000004
+#define IFX_SSC_GPOSTAT_OUT3            0x00000008
+#define IFX_SSC_GPOSTAT_OUT4            0x00000010
+#define IFX_SSC_GPOSTAT_OUT5            0x00000020
+#define IFX_SSC_GPOSTAT_OUT6            0x00000040
+#define IFX_SSC_GPOSTAT_OUT7            0x00000080
+#define IFX_SSC_GPOSTAT_OUT_ALL         0x000000FF
+
+/* WHBGPOSTAT register */
+#define IFX_SSC_WHBGPOSTAT_CLROUT0_POS  0
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT0     0x00000001
+#define IFX_SSC_WHBGPOSTAT_CLROUT1_POS  1
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT1     0x00000002
+#define IFX_SSC_WHBGPOSTAT_CLROUT2_POS  2
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT2     0x00000004
+#define IFX_SSC_WHBGPOSTAT_CLROUT3_POS  3
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT3     0x00000008
+#define IFX_SSC_WHBGPOSTAT_CLROUT4_POS  4
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT4     0x00000010
+#define IFX_SSC_WHBGPOSTAT_CLROUT5_POS  5
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT5     0x00000020
+#define IFX_SSC_WHBGPOSTAT_CLROUT6_POS  6
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT6     0x00000040
+#define IFX_SSC_WHBGPOSTAT_CLROUT7_POS  7
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT7     0x00000080
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT_ALL  0x000000FF
+
+#define IFX_SSC_WHBGPOSTAT_OUT0_POS  0
+#define IFX_SSC_WHBGPOSTAT_OUT1_POS  1
+#define IFX_SSC_WHBGPOSTAT_OUT2_POS  2
+#define IFX_SSC_WHBGPOSTAT_OUT3_POS  3
+#define IFX_SSC_WHBGPOSTAT_OUT4_POS  4
+#define IFX_SSC_WHBGPOSTAT_OUT5_POS  5
+#define IFX_SSC_WHBGPOSTAT_OUT6_POS  6
+#define IFX_SSC_WHBGPOSTAT_OUT7_POS  7
+
+#define IFX_SSC_WHBGPOSTAT_SETOUT0_POS  8
+#define IFX_SSC_WHBGPOSTAT_SET_OUT0     0x00000100
+#define IFX_SSC_WHBGPOSTAT_SETOUT1_POS  9
+#define IFX_SSC_WHBGPOSTAT_SET_OUT1     0x00000200
+#define IFX_SSC_WHBGPOSTAT_SETOUT2_POS  10
+#define IFX_SSC_WHBGPOSTAT_SET_OUT2     0x00000400
+#define IFX_SSC_WHBGPOSTAT_SETOUT3_POS  11
+#define IFX_SSC_WHBGPOSTAT_SET_OUT3     0x00000800
+#define IFX_SSC_WHBGPOSTAT_SETOUT4_POS  12
+#define IFX_SSC_WHBGPOSTAT_SET_OUT4     0x00001000
+#define IFX_SSC_WHBGPOSTAT_SETOUT5_POS  13
+#define IFX_SSC_WHBGPOSTAT_SET_OUT5     0x00002000
+#define IFX_SSC_WHBGPOSTAT_SETOUT6_POS  14
+#define IFX_SSC_WHBGPOSTAT_SET_OUT6     0x00004000
+#define IFX_SSC_WHBGPOSTAT_SETOUT7_POS  15
+#define IFX_SSC_WHBGPOSTAT_SET_OUT7     0x00008000
+#define IFX_SSC_WHBGPOSTAT_SET_OUT_ALL  0x0000FF00
+
+/* SFCON register */
+#define IFX_SSC_SFCON_SF_ENABLE                0x00000001
+#define IFX_SSC_SFCON_SF_DISABLE               0x00000000
+#define IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE  0x00000004
+#define IFX_SSC_SFCON_FIR_DISABLE_BEFORE_PAUSE 0x00000000
+#define IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE   0x00000008
+#define IFX_SSC_SFCON_FIR_DISABLE_AFTER_PAUSE  0x00000000
+#define IFX_SSC_SFCON_DATA_LENGTH_MASK         0x0000FFF0
+#define IFX_SSC_SFCON_DATA_LENGTH_OFFSET       4
+#define IFX_SSC_SFCON_PAUSE_DATA_MASK          0x00030000
+#define IFX_SSC_SFCON_PAUSE_DATA_OFFSET        16
+#define IFX_SSC_SFCON_PAUSE_DATA_0             0x00000000
+#define IFX_SSC_SFCON_PAUSE_DATA_1             0x00010000
+#define IFX_SSC_SFCON_PAUSE_DATA_IDLE          0x00020000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_MASK         0x000C0000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET       18
+#define IFX_SSC_SFCON_PAUSE_CLOCK_0            0x00000000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_1            0x00040000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_IDLE         0x00080000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_RUN          0x000C0000
+#define IFX_SSC_SFCON_STOP_AFTER_PAUSE         0x00100000
+#define IFX_SSC_SFCON_CONTINUE_AFTER_PAUSE     0x00000000
+#define IFX_SSC_SFCON_PAUSE_LENGTH_MASK        0xFFC00000
+#define IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET      22
+#define IFX_SSC_SFCON_DATA_LENGTH_MAX         4096
+#define IFX_SSC_SFCON_PAUSE_LENGTH_MAX        1024
+
+#define IFX_SSC_SFCON_EXTRACT_DATA_LENGTH(sfcon)  ((sfcon & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET)
+#define IFX_SSC_SFCON_EXTRACT_PAUSE_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET)
+#define IFX_SSC_SFCON_SET_DATA_LENGTH(value)      ((value << IFX_SSC_SFCON_DATA_LENGTH_OFFSET) & IFX_SSC_SFCON_DATA_LENGTH_MASK)
+#define IFX_SSC_SFCON_SET_PAUSE_LENGTH(value)      ((value << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) & IFX_SSC_SFCON_PAUSE_LENGTH_MASK)
+
+/* SFSTAT register */
+#define IFX_SSC_SFSTAT_IN_DATA            0x00000001
+#define IFX_SSC_SFSTAT_IN_PAUSE           0x00000002
+#define IFX_SSC_SFSTAT_DATA_COUNT_MASK    0x0000FFF0
+#define IFX_SSC_SFSTAT_DATA_COUNT_OFFSET  4
+#define IFX_SSC_SFSTAT_PAUSE_COUNT_MASK   0xFFF00000
+#define IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET 20
+
+#define IFX_SSC_SFSTAT_EXTRACT_DATA_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET)
+#define IFX_SSC_SFSTAT_EXTRACT_PAUSE_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET)
+
+/* RXREQ register */
+#define IFX_SSC_RXREQ_RXCOUNT_MASK       0x0000FFFF
+#define IFX_SSC_RXREQ_RXCOUNT_OFFSET     0
+
+/* RXCNT register */
+#define IFX_SSC_RXCNT_TODO_MASK       0x0000FFFF
+#define IFX_SSC_RXCNT_TODO_OFFSET     0
+
+/* DMACON register */
+#define IFX_SSC_DMACON_RXON           0x00000001
+#define IFX_SSC_DMACON_RXOFF          0x00000000
+#define IFX_SSC_DMACON_TXON           0x00000002
+#define IFX_SSC_DMACON_TXOFF          0x00000000
+#define IFX_SSC_DMACON_DMAON          0x00000003
+#define IFX_SSC_DMACON_DMAOFF         0x00000000
+#define IFX_SSC_DMACON_CLASS_MASK     0x0000000C
+#define IFX_SSC_DMACON_CLASS_OFFSET   2
+
+/* register access macros */
+#define ifx_ssc_fstat_received_words(status)    (status & 0x003F)
+#define ifx_ssc_fstat_words_to_transmit(status) ((status & 0x3F00) >> 8)
+
+#define ifx_ssc_change_status(data, addr)  WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_WHBSTATE))
+#define ifx_ssc_set_config(data, addr)     WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_CON))
+#define ifx_ssc_get_config(addr)           READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_CON))
+#define ifx_ssc_get_status(addr)           READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_STATE))
+#define ifx_ssc_receive(addr)              READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_RB))
+#define ifx_ssc_transmit(data, addr)       WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_TB))
+#define ifx_ssc_fifo_status(addr)          READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_FSTAT))
+#define ifx_ssc_set_baudrate(data, addr)   WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_BR))
+
+#define ifx_ssc_extract_rx_fifo_size(id)   ((id & IFX_SSC_PERID_RXFS_MASK) >> IFX_SSC_PERID_RXFS_OFFSET)
+#define ifx_ssc_extract_tx_fifo_size(id)   ((id & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET)
+
+#endif
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips.h
new file mode 100644 (file)
index 0000000..c8cf0ae
--- /dev/null
@@ -0,0 +1,516 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2005 infineon
+ *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _IFXMIPS_H__
+#define _IFXMIPS_H__
+
+#define ifxmips_r32(reg)                       __raw_readl(reg)
+#define ifxmips_w32(val, reg)                  __raw_writel(val, reg)
+#define ifxmips_w32_mask(clear, set, reg)      ifxmips_w32((ifxmips_r32(reg) & ~clear) | set, reg)
+
+/*------------ GENERAL */
+
+#define BOARD_SYSTEM_TYPE              "IFXMIPS"
+
+#define IOPORT_RESOURCE_START          0x10000000
+#define IOPORT_RESOURCE_END            0xffffffff
+#define IOMEM_RESOURCE_START           0x10000000
+#define IOMEM_RESOURCE_END             0xffffffff
+
+#define IFXMIPS_FLASH_START            0x10000000
+#define IFXMIPS_FLASH_MAX              0x02000000
+
+/*------------ ASC0/1 */
+
+#define IFXMIPS_ASC_BASE_ADDR          (KSEG1 + 0x1E100400)
+#define IFXMIPS_ASC_BASE_DIFF          (0x1E100C00 - 0x1E100400)
+
+#define IFXMIPS_ASC_FSTAT              0x0048
+#define IFXMIPS_ASC_TBUF               0x0020
+#define IFXMIPS_ASC_WHBSTATE           0x0018
+#define IFXMIPS_ASC_RBUF               0x0024
+#define IFXMIPS_ASC_STATE              0x0014
+#define IFXMIPS_ASC_IRNCR              0x00F8
+#define IFXMIPS_ASC_CLC                        0x0000
+#define IFXMIPS_ASC_PISEL              0x0004
+#define IFXMIPS_ASC_TXFCON             0x0044
+#define IFXMIPS_ASC_RXFCON             0x0040
+#define IFXMIPS_ASC_CON                        0x0010
+#define IFXMIPS_ASC_BG                 0x0050
+#define IFXMIPS_ASC_IRNREN             0x00F4
+
+#define IFXMIPS_ASC_CLC_DISS           0x2
+#define ASC_IRNREN_RX_BUF              0x8
+#define ASC_IRNREN_TX_BUF              0x4
+#define ASC_IRNREN_ERR                 0x2
+#define ASC_IRNREN_TX                  0x1
+#define ASC_IRNCR_TIR                  0x4
+#define ASC_IRNCR_RIR                  0x2
+#define ASC_IRNCR_EIR                  0x4
+#define ASCOPT_CSIZE                   0x3
+#define ASCOPT_CS7                     0x1
+#define ASCOPT_CS8                     0x2
+#define ASCOPT_PARENB                  0x4
+#define ASCOPT_STOPB                   0x8
+#define ASCOPT_PARODD                  0x0
+#define ASCOPT_CREAD                   0x20
+#define TXFIFO_FL                      1
+#define RXFIFO_FL                      1
+#define TXFIFO_FULL                    16
+#define ASCCLC_RMCMASK                 0x0000FF00
+#define ASCCLC_RMCOFFSET               8
+#define ASCCON_M_8ASYNC                        0x0
+#define ASCCON_M_7ASYNC                        0x2
+#define ASCCON_ODD                     0x00000020
+#define ASCCON_STP                     0x00000080
+#define ASCCON_BRS                     0x00000100
+#define ASCCON_FDE                     0x00000200
+#define ASCCON_R                       0x00008000
+#define ASCCON_FEN                     0x00020000
+#define ASCCON_ROEN                    0x00080000
+#define ASCCON_TOEN                    0x00100000
+#define ASCSTATE_PE                    0x00010000
+#define ASCSTATE_FE                    0x00020000
+#define ASCSTATE_ROE                   0x00080000
+#define ASCSTATE_ANY                   (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE)
+#define ASCWHBSTATE_CLRREN             0x00000001
+#define ASCWHBSTATE_SETREN             0x00000002
+#define ASCWHBSTATE_CLRPE              0x00000004
+#define ASCWHBSTATE_CLRFE              0x00000008
+#define ASCWHBSTATE_CLRROE             0x00000020
+#define ASCTXFCON_TXFEN                        0x0001
+#define ASCTXFCON_TXFFLU               0x0002
+#define ASCTXFCON_TXFITLMASK           0x3F00
+#define ASCTXFCON_TXFITLOFF            8
+#define ASCRXFCON_RXFEN                        0x0001
+#define ASCRXFCON_RXFFLU               0x0002
+#define ASCRXFCON_RXFITLMASK           0x3F00
+#define ASCRXFCON_RXFITLOFF            8
+#define ASCFSTAT_RXFFLMASK             0x003F
+#define ASCFSTAT_TXFFLMASK             0x3F00
+#define ASCFSTAT_TXFFLOFF              8
+
+
+
+/*------------ RCU */
+#define IFXMIPS_RCU_BASE_ADDR          0xBF203000
+
+/* reset request */
+#define IFXMIPS_RCU_RST                        ((u32 *)(IFXMIPS_RCU_BASE_ADDR + 0x0010))
+#define IFXMIPS_RCU_RST_CPU1           (1 << 3)
+#define IFXMIPS_RCU_RST_ALL            0x40000000
+
+#define IFXMIPS_RCU_RST_REQ_DFE                (1 << 7)
+#define IFXMIPS_RCU_RST_REQ_AFE                (1 << 11)
+#define IFXMIPS_RCU_RST_REQ_ARC_JTAG   (1 << 20)
+
+
+/*------------ GPTU */
+
+#define IFXMIPS_GPTU_BASE_ADDR         0xB8000300
+
+/* clock control register */
+#define IFXMIPS_GPTU_GPT_CLC           ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0000))
+
+/* captur reload register */
+#define IFXMIPS_GPTU_GPT_CAPREL                ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0030))
+
+/* timer 6 control register */
+#define IFXMIPS_GPTU_GPT_T6CON         ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0020))
+
+
+/*------------ EBU */
+
+#define IFXMIPS_EBU_BASE_ADDR          0xBE105300
+
+/* bus configuration register */
+#define IFXMIPS_EBU_BUSCON0            ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x0060))
+#define IFXMIPS_EBU_PCC_CON            ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x0090))
+#define IFXMIPS_EBU_PCC_IEN            ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x00A4))
+#define IFXMIPS_EBU_PCC_ISTAT          ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x00A0))
+
+
+/*------------ CGU */
+#define IFXMIPS_CGU_BASE_ADDR          (KSEG1 + 0x1F103000)
+#define IFXMIPS_CGU_PLL0_CFG           ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0004))
+#define IFXMIPS_CGU_PLL1_CFG           ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0008))
+#define IFXMIPS_CGU_PLL2_CFG           ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x000C))
+#define IFXMIPS_CGU_SYS                        ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0010))
+#define IFXMIPS_CGU_UPDATE             ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0014))
+#define IFXMIPS_CGU_IF_CLK             ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0018))
+#define IFXMIPS_CGU_OSC_CON            ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x001C))
+#define IFXMIPS_CGU_SMD                        ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0020))
+#define IFXMIPS_CGU_CT1SR              ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0028))
+#define IFXMIPS_CGU_CT2SR              ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x002C))
+#define IFXMIPS_CGU_PCMCR              ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0030))
+#define IFXMIPS_CGU_PCI_CR             ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0034))
+#define IFXMIPS_CGU_PD_PC              ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0038))
+#define IFXMIPS_CGU_FMR                        ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x003C))
+
+/* clock mux */
+#define IFXMIPS_CGU_SYS                        ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0010))
+#define IFXMIPS_CGU_IFCCR              ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0018))
+#define IFXMIPS_CGU_PCICR              ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0034))
+
+#define CLOCK_60M                      60000000
+#define CLOCK_83M                      83333333
+#define CLOCK_111M                     111111111
+#define CLOCK_133M                     133333333
+#define CLOCK_167M                     166666667
+#define CLOCK_333M                     333333333
+
+
+/*------------ CGU */
+
+#define IFXMIPS_PMU_BASE_ADDR          (KSEG1 + 0x1F102000)
+
+#define IFXMIPS_PMU_PWDCR              ((u32 *)(IFXMIPS_PMU_BASE_ADDR + 0x001C))
+#define IFXMIPS_PMU_PWDSR              ((u32 *)(IFXMIPS_PMU_BASE_ADDR + 0x0020))
+
+
+/*------------ ICU */
+
+#define IFXMIPS_ICU_BASE_ADDR          0xBF880200
+
+
+#define IFXMIPS_ICU_IM0_ISR            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0000))
+#define IFXMIPS_ICU_IM0_IER            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0008))
+#define IFXMIPS_ICU_IM0_IOSR           ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0010))
+#define IFXMIPS_ICU_IM0_IRSR           ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0018))
+#define IFXMIPS_ICU_IM0_IMR            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0020))
+
+#define IFXMIPS_ICU_IM1_ISR            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0028))
+#define IFXMIPS_ICU_IM2_IER            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0058))
+#define IFXMIPS_ICU_IM3_IER            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0080))
+#define IFXMIPS_ICU_IM4_IER            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x00A8))
+#define IFXMIPS_ICU_IM5_IER            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x00D0))
+
+#define IFXMIPS_ICU_OFFSET             (IFXMIPS_ICU_IM1_ISR - IFXMIPS_ICU_IM0_ISR)
+
+
+/*------------ ETOP */
+
+#define IFXMIPS_PPE32_BASE_ADDR                0xBE180000
+
+#define ETHERNET_PACKET_DMA_BUFFER_SIZE                0x600
+
+#define IFXMIPS_PPE32_MEM_MAP          ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x10000))
+#define IFXMIPS_PPE32_SRST             ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x10080))
+
+#define MII_MODE                       1
+#define REV_MII_MODE                   2
+
+/* mdio access */
+#define IFXMIPS_PPE32_MDIO_CFG         ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x11800))
+#define IFXMIPS_PPE32_MDIO_ACC         ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x11804))
+
+#define MDIO_ACC_REQUEST               0x80000000
+#define MDIO_ACC_READ                  0x40000000
+#define MDIO_ACC_ADDR_MASK             0x1f
+#define MDIO_ACC_ADDR_OFFSET           0x15
+#define MDIO_ACC_REG_MASK              0xff
+#define MDIO_ACC_REG_OFFSET            0x10
+#define MDIO_ACC_VAL_MASK              0xffff
+
+/* configuration */
+#define IFXMIPS_PPE32_CFG              ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1808))
+
+#define PPE32_MII_MASK                 0xfffffffc
+#define PPE32_MII_NORMAL               0x8
+#define PPE32_MII_REVERSE              0xe
+
+/* packet length */
+#define IFXMIPS_PPE32_IG_PLEN_CTRL     ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1820))
+
+#define PPE32_PLEN_OVER                        0x5ee
+#define PPE32_PLEN_UNDER               0x400000
+
+/* enet */
+#define IFXMIPS_PPE32_ENET_MAC_CFG     ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1840))
+
+#define PPE32_CGEN                     0x800
+
+
+/*------------ DMA */
+#define IFXMIPS_DMA_BASE_ADDR  0xBE104100
+
+#define IFXMIPS_DMA_CS                 ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x18))
+#define IFXMIPS_DMA_CIE                        ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x2C))
+#define IFXMIPS_DMA_IRNEN              ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0xf4))
+#define IFXMIPS_DMA_CCTRL              ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x1C))
+#define IFXMIPS_DMA_CIS                        ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x28))
+#define IFXMIPS_DMA_CDLEN              ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x24))
+#define IFXMIPS_DMA_PS                 ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x40))
+#define IFXMIPS_DMA_PCTRL              ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x44))
+#define IFXMIPS_DMA_CTRL               ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x10))
+#define IFXMIPS_DMA_CPOLL              ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x14))
+#define IFXMIPS_DMA_CDBA               ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x20))
+
+
+/*------------ PCI */
+#define PCI_CR_PR_BASE_ADDR            (KSEG1 + 0x1E105400)
+
+#define PCI_CR_FCI_ADDR_MAP0           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C0))
+#define PCI_CR_FCI_ADDR_MAP1           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C4))
+#define PCI_CR_FCI_ADDR_MAP2           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C8))
+#define PCI_CR_FCI_ADDR_MAP3           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00CC))
+#define PCI_CR_FCI_ADDR_MAP4           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D0))
+#define PCI_CR_FCI_ADDR_MAP5           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D4))
+#define PCI_CR_FCI_ADDR_MAP6           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D8))
+#define PCI_CR_FCI_ADDR_MAP7           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00DC))
+#define PCI_CR_CLK_CTRL                        ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0000))
+#define PCI_CR_PCI_MOD                 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0030))
+#define PCI_CR_PC_ARB                  ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0080))
+#define PCI_CR_FCI_ADDR_MAP11hg                ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00E4))
+#define PCI_CR_BAR11MASK               ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0044))
+#define PCI_CR_BAR12MASK               ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0048))
+#define PCI_CR_BAR13MASK               ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x004C))
+#define PCI_CS_BASE_ADDR1              ((u32 *)(PCI_CS_PR_BASE_ADDR + 0x0010))
+#define PCI_CR_PCI_ADDR_MAP11          ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0064))
+#define PCI_CR_FCI_BURST_LENGTH                ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00E8))
+#define PCI_CR_PCI_EOI                 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x002C))
+
+#define PCI_CS_PR_BASE_ADDR            (KSEG1 + 0x17000000)
+
+#define PCI_CS_STS_CMD                 ((u32 *)(PCI_CS_PR_BASE_ADDR + 0x0004))
+
+#define PCI_MASTER0_REQ_MASK_2BITS     8
+#define PCI_MASTER1_REQ_MASK_2BITS     10
+#define PCI_MASTER2_REQ_MASK_2BITS     12
+#define INTERNAL_ARB_ENABLE_BIT                0
+
+
+/*------------ WDT */
+
+#define IFXMIPS_WDT_BASE_ADDR          (KSEG1 + 0x1F880000)
+
+#define IFXMIPS_BIU_WDT_CR             ((u32 *)(IFXMIPS_WDT_BASE_ADDR + 0x03F0))
+#define IFXMIPS_BIU_WDT_SR             ((u32 *)(IFXMIPS_WDT_BASE_ADDR + 0x03F8))
+
+
+/*------------ LED */
+
+#define IFXMIPS_LED_BASE_ADDR          (KSEG1 + 0x1E100BB0)
+#define IFXMIPS_LED_CON0               ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0000))
+#define IFXMIPS_LED_CON1               ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0004))
+#define IFXMIPS_LED_CPU0               ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0008))
+#define IFXMIPS_LED_CPU1               ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x000C))
+#define IFXMIPS_LED_AR                 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0010))
+
+#define LED_CON0_SWU                   (1 << 31)
+#define LED_CON0_AD1                   (1 << 25)
+#define LED_CON0_AD0                   (1 << 24)
+
+#define IFXMIPS_LED_2HZ                        (0)
+#define IFXMIPS_LED_4HZ                        (1 << 23)
+#define IFXMIPS_LED_8HZ                        (2 << 23)
+#define IFXMIPS_LED_10HZ               (3 << 23)
+#define IFXMIPS_LED_MASK               (0xf << 23)
+
+#define IFXMIPS_LED_UPD_SRC_FPI        (1 << 31)
+#define IFXMIPS_LED_UPD_MASK           (3 << 30)
+#define IFXMIPS_LED_ADSL_SRC           (3 << 24)
+
+#define IFXMIPS_LED_GROUP0             (1 << 0)
+#define IFXMIPS_LED_GROUP1             (1 << 1)
+#define IFXMIPS_LED_GROUP2             (1 << 2)
+
+#define IFXMIPS_LED_RISING             0
+#define IFXMIPS_LED_FALLING            (1 << 26)
+#define IFXMIPS_LED_EDGE_MASK          (1 << 26)
+
+
+/*------------ GPIO */
+
+#define IFXMIPS_GPIO_BASE_ADDR (0xBE100B00)
+
+#define IFXMIPS_GPIO_P0_OUT            ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0010))
+#define IFXMIPS_GPIO_P1_OUT            ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0040))
+#define IFXMIPS_GPIO_P0_IN             ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0014))
+#define IFXMIPS_GPIO_P1_IN             ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0044))
+#define IFXMIPS_GPIO_P0_DIR            ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0018))
+#define IFXMIPS_GPIO_P1_DIR            ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0048))
+#define IFXMIPS_GPIO_P0_ALTSEL0                ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x001C))
+#define IFXMIPS_GPIO_P1_ALTSEL0                ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x004C))
+#define IFXMIPS_GPIO_P0_ALTSEL1                ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0020))
+#define IFXMIPS_GPIO_P1_ALTSEL1                ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0050))
+#define IFXMIPS_GPIO_P0_OD             ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0024))
+#define IFXMIPS_GPIO_P1_OD             ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0054))
+#define IFXMIPS_GPIO_P0_STOFF          ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0028))
+#define IFXMIPS_GPIO_P1_STOFF          ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0058))
+#define IFXMIPS_GPIO_P0_PUDSEL         ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x002C))
+#define IFXMIPS_GPIO_P1_PUDSEL         ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x005C))
+#define IFXMIPS_GPIO_P0_PUDEN          ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0030))
+#define IFXMIPS_GPIO_P1_PUDEN          ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0060))
+
+
+/*------------ SSC */
+
+#define IFXMIPS_SSC_BASE_ADDR          (KSEG1 + 0x1e100800)
+
+
+#define IFXMIPS_SSC_CLC                        ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0000))
+#define IFXMIPS_SSC_IRN                        ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x00F4))
+#define IFXMIPS_SSC_SFCON              ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0060))
+#define IFXMIPS_SSC_WHBGPOSTAT         ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0078))
+#define IFXMIPS_SSC_STATE              ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0014))
+#define IFXMIPS_SSC_WHBSTATE           ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0018))
+#define IFXMIPS_SSC_FSTAT              ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0038))
+#define IFXMIPS_SSC_ID                 ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0008))
+#define IFXMIPS_SSC_TB                 ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0020))
+#define IFXMIPS_SSC_RXFCON             ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0030))
+#define IFXMIPS_SSC_TXFCON             ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0034))
+#define IFXMIPS_SSC_CON                        ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0010))
+#define IFXMIPS_SSC_GPOSTAT            ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0074))
+#define IFXMIPS_SSC_RB                 ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0024))
+#define IFXMIPS_SSC_RXCNT              ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0084))
+#define IFXMIPS_SSC_GPOCON             ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0070))
+#define IFXMIPS_SSC_BR                 ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0040))
+#define IFXMIPS_SSC_RXREQ              ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0080))
+#define IFXMIPS_SSC_SFSTAT             ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0064))
+#define IFXMIPS_SSC_RXCNT              ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0084))
+
+
+/*------------ MEI */
+
+#define IFXMIPS_MEI_BASE_ADDR          (KSEG1 + 0x1E116000)
+
+#define MEI_DATA_XFR                   ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0000))
+#define MEI_VERSION                    ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0004))
+#define MEI_ARC_GP_STAT                        ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0008))
+#define MEI_DATA_XFR_STAT              ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x000C))
+#define MEI_XFR_ADDR                   ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0010))
+#define MEI_MAX_WAIT                   ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0014))
+#define MEI_TO_ARC_INT                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0018))
+#define ARC_TO_MEI_INT                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x001C))
+#define ARC_TO_MEI_INT_MASK            ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0020))
+#define MEI_DEBUG_WAD                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0024))
+#define MEI_DEBUG_RAD                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0028))
+#define MEI_DEBUG_DATA                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x002C))
+#define MEI_DEBUG_DEC                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0030))
+#define MEI_CONFIG                     ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0034))
+#define MEI_RST_CONTROL                        ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0038))
+#define MEI_DBG_MASTER                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x003C))
+#define MEI_CLK_CONTROL                        ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0040))
+#define MEI_BIST_CONTROL               ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0044))
+#define MEI_BIST_STAT                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0048))
+#define MEI_XDATA_BASE_SH              ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x004c))
+#define MEI_XDATA_BASE                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0050))
+#define MEI_XMEM_BAR_BASE              ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0054))
+#define MEI_XMEM_BAR0                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0054))
+#define MEI_XMEM_BAR1                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0058))
+#define MEI_XMEM_BAR2                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x005C))
+#define MEI_XMEM_BAR3                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0060))
+#define MEI_XMEM_BAR4                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0064))
+#define MEI_XMEM_BAR5                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0068))
+#define MEI_XMEM_BAR6                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x006C))
+#define MEI_XMEM_BAR7                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0070))
+#define MEI_XMEM_BAR8                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0074))
+#define MEI_XMEM_BAR9                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0078))
+#define MEI_XMEM_BAR10                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x007C))
+#define MEI_XMEM_BAR11                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0080))
+#define MEI_XMEM_BAR12                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0084))
+#define MEI_XMEM_BAR13                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0088))
+#define MEI_XMEM_BAR14                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x008C))
+#define MEI_XMEM_BAR15                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0090))
+#define MEI_XMEM_BAR16                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0094))
+
+
+/*------------ DEU */
+
+#define IFXMIPS_DEU_BASE               (KSEG1 + 0x1E103100)
+#define IFXMIPS_DEU_CLK                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0000))
+#define IFXMIPS_DEU_ID                 ((u32 *)(IFXMIPS_DEU_BASE + 0x0008))
+
+#define IFXMIPS_DES_CON                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0010))
+#define IFXMIPS_DES_IHR                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0014))
+#define IFXMIPS_DES_ILR                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0018))
+#define IFXMIPS_DES_K1HR               ((u32 *)(IFXMIPS_DEU_BASE + 0x001C))
+#define IFXMIPS_DES_K1LR               ((u32 *)(IFXMIPS_DEU_BASE + 0x0020))
+#define IFXMIPS_DES_K3HR               ((u32 *)(IFXMIPS_DEU_BASE + 0x0024))
+#define IFXMIPS_DES_K3LR               ((u32 *)(IFXMIPS_DEU_BASE + 0x0028))
+#define IFXMIPS_DES_IVHR               ((u32 *)(IFXMIPS_DEU_BASE + 0x002C))
+#define IFXMIPS_DES_IVLR               ((u32 *)(IFXMIPS_DEU_BASE + 0x0030))
+#define IFXMIPS_DES_OHR                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0040))
+#define IFXMIPS_DES_OLR                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0050))
+#define IFXMIPS_AES_CON                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0050))
+#define IFXMIPS_AES_ID3R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0054))
+#define IFXMIPS_AES_ID2R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0058))
+#define IFXMIPS_AES_ID1R               ((u32 *)(IFXMIPS_DEU_BASE + 0x005C))
+#define IFXMIPS_AES_ID0R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0060))
+#define IFXMIPS_AES_K7R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0064))
+#define IFXMIPS_AES_K6R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0068))
+#define IFXMIPS_AES_K5R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x006C))
+#define IFXMIPS_AES_K4R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0070))
+#define IFXMIPS_AES_K3R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0074))
+#define IFXMIPS_AES_K2R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0078))
+#define IFXMIPS_AES_K1R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x007C))
+#define IFXMIPS_AES_K0R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0080))
+#define IFXMIPS_AES_IV3R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0084))
+#define IFXMIPS_AES_IV2R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0088))
+#define IFXMIPS_AES_IV1R               ((u32 *)(IFXMIPS_DEU_BASE + 0x008C))
+#define IFXMIPS_AES_IV0R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0090))
+#define IFXMIPS_AES_0D3R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0094))
+#define IFXMIPS_AES_0D2R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0098))
+#define IFXMIPS_AES_OD1R               ((u32 *)(IFXMIPS_DEU_BASE + 0x009C))
+#define IFXMIPS_AES_OD0R               ((u32 *)(IFXMIPS_DEU_BASE + 0x00A0))
+
+/*------------ FUSE */
+
+#define IFXMIPS_FUSE_BASE_ADDR         (KSEG1 + 0x1F107354)
+
+
+/*------------ MPS */
+
+#define IFXMIPS_MPS_BASE_ADDR          (KSEG1 + 0x1F107000)
+#define IFXMIPS_MPS_SRAM               ((u32 *)(KSEG1 + 0x1F200000))
+
+#define IFXMIPS_MPS_CHIPID             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0344))
+#define IFXMIPS_MPS_VC0ENR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0000))
+#define IFXMIPS_MPS_VC1ENR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0004))
+#define IFXMIPS_MPS_VC2ENR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0008))
+#define IFXMIPS_MPS_VC3ENR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x000C))
+#define IFXMIPS_MPS_RVC0SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0010))
+#define IFXMIPS_MPS_RVC1SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0014))
+#define IFXMIPS_MPS_RVC2SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0018))
+#define IFXMIPS_MPS_RVC3SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x001C))
+#define IFXMIPS_MPS_SVC0SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0020))
+#define IFXMIPS_MPS_SVC1SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0024))
+#define IFXMIPS_MPS_SVC2SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0028))
+#define IFXMIPS_MPS_SVC3SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x002C))
+#define IFXMIPS_MPS_CVC0SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0030))
+#define IFXMIPS_MPS_CVC1SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0034))
+#define IFXMIPS_MPS_CVC2SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0038))
+#define IFXMIPS_MPS_CVC3SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x003C))
+#define IFXMIPS_MPS_RAD0SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0040))
+#define IFXMIPS_MPS_RAD1SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0044))
+#define IFXMIPS_MPS_SAD0SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0048))
+#define IFXMIPS_MPS_SAD1SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x004C))
+#define IFXMIPS_MPS_CAD0SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0050))
+#define IFXMIPS_MPS_CAD1SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0054))
+#define IFXMIPS_MPS_AD0ENR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0058))
+#define IFXMIPS_MPS_AD1ENR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x005C))
+
+#define IFXMIPS_MPS_CHIPID_VERSION_GET(value)  (((value) >> 28) & ((1 << 4) - 1))
+#define IFXMIPS_MPS_CHIPID_VERSION_SET(value)  ((((1 << 4) - 1) & (value)) << 28)
+#define IFXMIPS_MPS_CHIPID_PARTNUM_GET(value)  (((value) >> 12) & ((1 << 16) - 1))
+#define IFXMIPS_MPS_CHIPID_PARTNUM_SET(value)  ((((1 << 16) - 1) & (value)) << 12)
+#define IFXMIPS_MPS_CHIPID_MANID_GET(value)    (((value) >> 1) & ((1 << 10) - 1))
+#define IFXMIPS_MPS_CHIPID_MANID_SET(value)    ((((1 << 10) - 1) & (value)) << 1)
+
+#endif
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_dma.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_dma.h
new file mode 100644 (file)
index 0000000..8ba852a
--- /dev/null
@@ -0,0 +1,195 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2005 infineon
+ *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+#ifndef _IFXMIPS_DMA_H__
+#define _IFXMIPS_DMA_H__
+
+#define RCV_INT                                                1
+#define TX_BUF_FULL_INT                                        2
+#define TRANSMIT_CPT_INT                               4
+#define IFXMIPS_DMA_CH_ON                              1
+#define IFXMIPS_DMA_CH_OFF                             0
+#define IFXMIPS_DMA_CH_DEFAULT_WEIGHT                  100
+
+enum attr_t{
+       TX = 0,
+       RX = 1,
+       RESERVED = 2,
+       DEFAULT = 3,
+};
+
+#define DMA_OWN                                                1
+#define CPU_OWN                                                0
+#define DMA_MAJOR                                      250
+
+#define DMA_DESC_OWN_CPU                               0x0
+#define DMA_DESC_OWN_DMA                               0x80000000
+#define DMA_DESC_CPT_SET                               0x40000000
+#define DMA_DESC_SOP_SET                               0x20000000
+#define DMA_DESC_EOP_SET                               0x10000000
+
+#define MISCFG_MASK                                    0x40
+#define RDERR_MASK                                     0x20
+#define CHOFF_MASK                                     0x10
+#define DESCPT_MASK                                    0x8
+#define DUR_MASK                                       0x4
+#define EOP_MASK                                       0x2
+
+#define DMA_DROP_MASK                                  (1<<31)
+
+#define IFXMIPS_DMA_RX                                 -1
+#define IFXMIPS_DMA_TX                                 1
+
+struct dma_chan_map {
+       const char *dev_name;
+       enum attr_t dir;
+       int pri;
+       int irq;
+       int rel_chan_no;
+};
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+struct rx_desc {
+       u32 data_length:16;
+       volatile u32 reserved:7;
+       volatile u32 byte_offset:2;
+       volatile u32 Burst_length_offset:3;
+       volatile u32 EoP:1;
+       volatile u32 Res:1;
+       volatile u32 C:1;
+       volatile u32 OWN:1;
+       volatile u32 Data_Pointer; /* fixme: should be 28 bits here */
+};
+
+struct tx_desc {
+       volatile u32 data_length:16;
+       volatile u32 reserved1:7;
+       volatile u32 byte_offset:5;
+       volatile u32 EoP:1;
+       volatile u32 SoP:1;
+       volatile u32 C:1;
+       volatile u32 OWN:1;
+       volatile u32 Data_Pointer; /* fixme: should be 28 bits here */
+};
+#else /* BIG */
+struct rx_desc {
+       union {
+               struct {
+                       volatile u32 OWN:1;
+                       volatile u32 C:1;
+                       volatile u32 SoP:1;
+                       volatile u32 EoP:1;
+                       volatile u32 Burst_length_offset:3;
+                       volatile u32 byte_offset:2;
+                       volatile u32 reserve:7;
+                       volatile u32 data_length:16;
+               } field;
+               volatile u32 word;
+       } status;
+       volatile u32 Data_Pointer;
+};
+
+struct tx_desc {
+       union {
+               struct {
+                       volatile u32 OWN:1;
+                       volatile u32 C:1;
+                       volatile u32 SoP:1;
+                       volatile u32 EoP:1;
+                       volatile u32 byte_offset:5;
+                       volatile u32 reserved:7;
+                       volatile u32 data_length:16;
+               } field;
+               volatile u32 word;
+       } status;
+       volatile u32 Data_Pointer;
+};
+#endif /* ENDIAN */
+
+struct dma_channel_info {
+       /* relative channel number */
+       int rel_chan_no;
+       /* class for this channel for QoS */
+       int pri;
+       /* specify byte_offset */
+       int byte_offset;
+       /* direction */
+       int dir;
+       /* irq number */
+       int irq;
+       /* descriptor parameter */
+       int desc_base;
+       int desc_len;
+       int curr_desc;
+       int prev_desc; /* only used if it is a tx channel*/
+       /* weight setting for WFQ algorithm*/
+       int weight;
+       int default_weight;
+       int packet_size;
+       int burst_len;
+       /* on or off of this channel */
+       int control;
+       /* optional information for the upper layer devices */
+#if defined(CONFIG_IFXMIPS_ETHERNET_D2) || defined(CONFIG_IFXMIPS_PPA)
+       void *opt[64];
+#else
+       void *opt[25];
+#endif
+       /* Pointer to the peripheral device who is using this channel */
+       void *dma_dev;
+       /* channel operations */
+       void (*open)(struct dma_channel_info *pCh);
+       void (*close)(struct dma_channel_info *pCh);
+       void (*reset)(struct dma_channel_info *pCh);
+       void (*enable_irq)(struct dma_channel_info *pCh);
+       void (*disable_irq)(struct dma_channel_info *pCh);
+};
+
+struct dma_device_info {
+       /* device name of this peripheral */
+       char device_name[15];
+       int reserved;
+       int tx_burst_len;
+       int rx_burst_len;
+       int default_weight;
+       int current_tx_chan;
+       int current_rx_chan;
+       int num_tx_chan;
+       int num_rx_chan;
+       int max_rx_chan_num;
+       int max_tx_chan_num;
+       struct dma_channel_info *tx_chan[20];
+       struct dma_channel_info *rx_chan[20];
+       /*functions, optional*/
+       u8 *(*buffer_alloc)(int len, int *offset, void **opt);
+       void (*buffer_free)(u8 *dataptr, void *opt);
+       int (*intr_handler)(struct dma_device_info *info, int status);
+       void *priv;             /* used by peripheral driver only */
+};
+
+struct dma_device_info *dma_device_reserve(char *dev_name);
+void dma_device_release(struct dma_device_info *dev);
+void dma_device_register(struct dma_device_info *info);
+void dma_device_unregister(struct dma_device_info *info);
+int dma_device_read(struct dma_device_info *info, u8 **dataptr, void **opt);
+int dma_device_write(struct dma_device_info *info, u8 *dataptr, int len,
+       void *opt);
+
+#endif
+
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_ebu.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_ebu.h
new file mode 100644 (file)
index 0000000..4c9396a
--- /dev/null
@@ -0,0 +1,23 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _IFXMIPS_EBU_H__
+#define _IFXMIPS_EBU_H__
+
+extern spinlock_t ebu_lock;
+
+#endif
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_gpio.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_gpio.h
new file mode 100644 (file)
index 0000000..a4c8c3f
--- /dev/null
@@ -0,0 +1,40 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _IFXMIPS_GPIO_H__
+#define _IFXMIPS_GPIO_H__
+
+extern int ifxmips_port_reserve_pin(unsigned int port, unsigned int pin);
+extern int ifxmips_port_free_pin(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_open_drain(unsigned int port, unsigned int pin);
+extern int ifxmips_port_clear_open_drain(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_pudsel(unsigned int port, unsigned int pin);
+extern int ifxmips_port_clear_pudsel(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_puden(unsigned int port, unsigned int pin);
+extern int ifxmips_port_clear_puden(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_stoff(unsigned int port, unsigned int pin);
+extern int ifxmips_port_clear_stoff(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_dir_out(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_dir_in(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_output(unsigned int port, unsigned int pin);
+extern int ifxmips_port_clear_output(unsigned int port, unsigned int pin);
+extern int ifxmips_port_get_input(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_altsel0(unsigned int port, unsigned int pin);
+extern int ifxmips_port_clear_altsel0(unsigned int port, unsigned int pin);
+extern int ifxmips_port_set_altsel1(unsigned int port, unsigned int pin);
+extern int ifxmips_port_clear_altsel1(unsigned int port, unsigned int pin);
+
+#endif
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_gptu.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_gptu.h
new file mode 100644 (file)
index 0000000..330c3cf
--- /dev/null
@@ -0,0 +1,155 @@
+#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
+#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
+
+
+/******************************************************************************
+       Copyright (c) 2002, Infineon Technologies.  All rights reserved.
+
+                               No Warranty
+   Because the program is licensed free of charge, there is no warranty for
+   the program, to the extent permitted by applicable law.  Except when
+   otherwise stated in writing the copyright holders and/or other parties
+   provide the program "as is" without warranty of any kind, either
+   expressed or implied, including, but not limited to, the implied
+   warranties of merchantability and fitness for a particular purpose. The
+   entire risk as to the quality and performance of the program is with
+   you.  should the program prove defective, you assume the cost of all
+   necessary servicing, repair or correction.
+
+   In no event unless required by applicable law or agreed to in writing
+   will any copyright holder, or any other party who may modify and/or
+   redistribute the program as permitted above, be liable to you for
+   damages, including any general, special, incidental or consequential
+   damages arising out of the use or inability to use the program
+   (including but not limited to loss of data or data being rendered
+   inaccurate or losses sustained by you or third parties or a failure of
+   the program to operate with any other programs), even if such holder or
+   other party has been advised of the possibility of such damages.
+******************************************************************************/
+
+
+/*
+ * ####################################
+ *              Definition
+ * ####################################
+ */
+
+/*
+ *  Available Timer/Counter Index
+ */
+#define TIMER(n, X)                     (n * 2 + (X ? 1 : 0))
+#define TIMER_ANY                       0x00
+#define TIMER1A                         TIMER(1, 0)
+#define TIMER1B                         TIMER(1, 1)
+#define TIMER2A                         TIMER(2, 0)
+#define TIMER2B                         TIMER(2, 1)
+#define TIMER3A                         TIMER(3, 0)
+#define TIMER3B                         TIMER(3, 1)
+
+/*
+ *  Flag of Timer/Counter
+ *  These flags specify the way in which timer is configured.
+ */
+/*  Bit size of timer/counter.                      */
+#define TIMER_FLAG_16BIT                0x0000
+#define TIMER_FLAG_32BIT                0x0001
+/*  Switch between timer and counter.               */
+#define TIMER_FLAG_TIMER                0x0000
+#define TIMER_FLAG_COUNTER              0x0002
+/*  Stop or continue when overflowing/underflowing. */
+#define TIMER_FLAG_ONCE                 0x0000
+#define TIMER_FLAG_CYCLIC               0x0004
+/*  Count up or counter down.                       */
+#define TIMER_FLAG_UP                   0x0000
+#define TIMER_FLAG_DOWN                 0x0008
+/*  Count on specific level or edge.                */
+#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
+#define TIMER_FLAG_LOW_LEVEL_SENSITIVE  0x0040
+#define TIMER_FLAG_RISE_EDGE            0x0010
+#define TIMER_FLAG_FALL_EDGE            0x0020
+#define TIMER_FLAG_ANY_EDGE             0x0030
+/*  Signal is syncronous to module clock or not.    */
+#define TIMER_FLAG_UNSYNC               0x0000
+#define TIMER_FLAG_SYNC                 0x0080
+/*  Different interrupt handle type.                */
+#define TIMER_FLAG_NO_HANDLE            0x0000
+#if defined(__KERNEL__)
+    #define TIMER_FLAG_CALLBACK_IN_IRQ  0x0100
+#endif  //  defined(__KERNEL__)
+#define TIMER_FLAG_SIGNAL               0x0300
+/*  Internal clock source or external clock source  */
+#define TIMER_FLAG_INT_SRC              0x0000
+#define TIMER_FLAG_EXT_SRC              0x1000
+
+
+/*
+ *  ioctl Command
+ */
+#define GPTU_REQUEST_TIMER              0x01    /*  General method to setup timer/counter.  */
+#define GPTU_FREE_TIMER                 0x02    /*  Free timer/counter.                     */
+#define GPTU_START_TIMER                0x03    /*  Start or resume timer/counter.          */
+#define GPTU_STOP_TIMER                 0x04    /*  Suspend timer/counter.                  */
+#define GPTU_GET_COUNT_VALUE            0x05    /*  Get current count value.                */
+#define GPTU_CALCULATE_DIVIDER          0x06    /*  Calculate timer divider from given freq.*/
+#define GPTU_SET_TIMER                  0x07    /*  Simplified method to setup timer.       */
+#define GPTU_SET_COUNTER                0x08    /*  Simplified method to setup counter.     */
+
+/*
+ *  Data Type Used to Call ioctl
+ */
+struct gptu_ioctl_param {
+    unsigned int                        timer;  /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
+                                                 *  GPTU_SET_COUNTER, this field is ID of expected      *
+                                                 *  timer/counter. If it's zero, a timer/counter would  *
+                                                 *  be dynamically allocated and ID would be stored in  *
+                                                 *  this field.                                         *
+                                                 *  In command GPTU_GET_COUNT_VALUE, this field is      *
+                                                 *  ignored.                                            *
+                                                 *  In other command, this field is ID of timer/counter *
+                                                 *  allocated.                                          */
+    unsigned int                        flag;   /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
+                                                 *  GPTU_SET_COUNTER, this field contains flags to      *
+                                                 *  specify how to configure timer/counter.             *
+                                                 *  In command GPTU_START_TIMER, zero indicate start    *
+                                                 *  and non-zero indicate resume timer/counter.         *
+                                                 *  In other command, this field is ignored.            */
+    unsigned long                       value;  /*  In command GPTU_REQUEST_TIMER, this field contains  *
+                                                 *  init/reload value.                                  *
+                                                 *  In command GPTU_SET_TIMER, this field contains      *
+                                                 *  frequency (0.001Hz) of timer.                       *
+                                                 *  In command GPTU_GET_COUNT_VALUE, current count      *
+                                                 *  value would be stored in this field.                *
+                                                 *  In command GPTU_CALCULATE_DIVIDER, this field       *
+                                                 *  contains frequency wanted, and after calculation,   *
+                                                 *  divider would be stored in this field to overwrite  *
+                                                 *  the frequency.                                      *
+                                                 *  In other command, this field is ignored.            */
+    int                                 pid;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
+                                                 *  if signal is required, this field contains process  *
+                                                 *  ID to which signal would be sent.                   *
+                                                 *  In other command, this field is ignored.            */
+    int                                 sig;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
+                                                 *  if signal is required, this field contains signal   *
+                                                 *  number which would be sent.                         *
+                                                 *  In other command, this field is ignored.            */
+};
+
+/*
+ * ####################################
+ *              Data Type
+ * ####################################
+ */
+typedef void (*timer_callback)(unsigned long arg);
+
+extern int ifxmips_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
+extern int ifxmips_free_timer(unsigned int);
+extern int ifxmips_start_timer(unsigned int, int);
+extern int ifxmips_stop_timer(unsigned int);
+extern int ifxmips_reset_counter_flags(u32 timer, u32 flags);
+extern int ifxmips_get_count_value(unsigned int, unsigned long *);
+extern u32 ifxmips_cal_divider(unsigned long);
+extern int ifxmips_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
+extern int ifxmips_set_counter(unsigned int timer, unsigned int flag,
+       u32 reload, unsigned long arg1, unsigned long arg2);
+
+#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_irq.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_irq.h
new file mode 100644 (file)
index 0000000..f84fdcb
--- /dev/null
@@ -0,0 +1,74 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2005 infineon
+ *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _IFXMIPS_IRQ__
+#define _IFXMIPS_IRQ__
+
+#define INT_NUM_IRQ0                   8
+#define INT_NUM_IM0_IRL0               (INT_NUM_IRQ0 + 0)
+#define INT_NUM_IM1_IRL0               (INT_NUM_IRQ0 + 32)
+#define INT_NUM_IM2_IRL0               (INT_NUM_IRQ0 + 64)
+#define INT_NUM_IM3_IRL0               (INT_NUM_IRQ0 + 96)
+#define INT_NUM_IM4_IRL0               (INT_NUM_IRQ0 + 128)
+#define INT_NUM_IM_OFFSET              (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
+
+#define IFXMIPSASC_TIR(x)              (INT_NUM_IM3_IRL0 + (x * 7))
+#define IFXMIPSASC_RIR(x)              (INT_NUM_IM3_IRL0 + (x * 7) + 2)
+#define IFXMIPSASC_EIR(x)              (INT_NUM_IM3_IRL0 + (x * 7) + 3)
+
+#define IFXMIPS_SSC_TIR                        (INT_NUM_IM0_IRL0 + 15)
+#define IFXMIPS_SSC_RIR                        (INT_NUM_IM0_IRL0 + 14)
+#define IFXMIPS_SSC_EIR                        (INT_NUM_IM0_IRL0 + 16)
+
+#define IFXMIPS_MEI_INT                        (INT_NUM_IM1_IRL0 + 23)
+
+#define IFXMIPS_TIMER6_INT             (INT_NUM_IM1_IRL0 + 23)
+#define IFXMIPS_USB_OC_INT             (INT_NUM_IM4_IRL0 + 23)
+
+#define MIPS_CPU_TIMER_IRQ             7
+
+#define IFXMIPS_DMA_CH0_INT            (INT_NUM_IM2_IRL0)
+#define IFXMIPS_DMA_CH1_INT            (INT_NUM_IM2_IRL0 + 1)
+#define IFXMIPS_DMA_CH2_INT            (INT_NUM_IM2_IRL0 + 2)
+#define IFXMIPS_DMA_CH3_INT            (INT_NUM_IM2_IRL0 + 3)
+#define IFXMIPS_DMA_CH4_INT            (INT_NUM_IM2_IRL0 + 4)
+#define IFXMIPS_DMA_CH5_INT            (INT_NUM_IM2_IRL0 + 5)
+#define IFXMIPS_DMA_CH6_INT            (INT_NUM_IM2_IRL0 + 6)
+#define IFXMIPS_DMA_CH7_INT            (INT_NUM_IM2_IRL0 + 7)
+#define IFXMIPS_DMA_CH8_INT            (INT_NUM_IM2_IRL0 + 8)
+#define IFXMIPS_DMA_CH9_INT            (INT_NUM_IM2_IRL0 + 9)
+#define IFXMIPS_DMA_CH10_INT           (INT_NUM_IM2_IRL0 + 10)
+#define IFXMIPS_DMA_CH11_INT           (INT_NUM_IM2_IRL0 + 11)
+#define IFXMIPS_DMA_CH12_INT           (INT_NUM_IM2_IRL0 + 25)
+#define IFXMIPS_DMA_CH13_INT           (INT_NUM_IM2_IRL0 + 26)
+#define IFXMIPS_DMA_CH14_INT           (INT_NUM_IM2_IRL0 + 27)
+#define IFXMIPS_DMA_CH15_INT           (INT_NUM_IM2_IRL0 + 28)
+#define IFXMIPS_DMA_CH16_INT           (INT_NUM_IM2_IRL0 + 29)
+#define IFXMIPS_DMA_CH17_INT           (INT_NUM_IM2_IRL0 + 30)
+#define IFXMIPS_DMA_CH18_INT           (INT_NUM_IM2_IRL0 + 16)
+#define IFXMIPS_DMA_CH19_INT           (INT_NUM_IM2_IRL0 + 21)
+
+#define IFXMIPS_PPE_MBOX_INT           (INT_NUM_IM2_IRL0 + 24)
+
+#define IFXMIPS_USB_INT                        (INT_NUM_IM4_IRL0 + 22)
+#define IFXMIPS_USB_OC_INT             (INT_NUM_IM4_IRL0 + 23)
+
+
+extern void ifxmips_mask_and_ack_irq(unsigned int irq_nr);
+
+#endif
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_led.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_led.h
new file mode 100644 (file)
index 0000000..c97657a
--- /dev/null
@@ -0,0 +1,26 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _IFXMIPS_LED_H__
+#define _IFXMIPS_LED_H__
+
+extern void ifxmips_led_set(unsigned int led);
+extern void ifxmips_led_clear(unsigned int led);
+extern void ifxmips_led_blink_set(unsigned int led);
+extern void ifxmips_led_blink_clear(unsigned int led);
+
+#endif
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei.h
new file mode 100644 (file)
index 0000000..d8a4b88
--- /dev/null
@@ -0,0 +1,270 @@
+/******************************************************************************
+**
+** FILE NAME    : danube_mei.h
+** PROJECT      : Danube
+** MODULES      : MEI
+**
+** DATE         : 1 Jan 2006
+** AUTHOR       : TC Chen
+** DESCRIPTION  : MEI Driver
+** COPYRIGHT    :       Copyright (c) 2006
+**                      Infineon Technologies AG
+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+**    This program is free software; you can redistribute it and/or modify
+**    it under the terms of the GNU General Public License as published by
+**    the Free Software Foundation; either version 2 of the License, or
+**    (at your option) any later version.
+**
+** HISTORY
+** $Version $Date      $Author     $Comment
+*******************************************************************************/
+#ifndef                _IFXMIPS_MEI_H
+#define                _IFXMIPS_MEI_H
+/////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#include "ifxmips_mei_app.h"
+
+#define IFXMIPS_MEI_DEBUG
+#define IFXMIPS_MEI_CMV_EXTRA
+#define IFXMIPS_MEI_MAJOR      106
+
+/*
+**     Define where in ME Processor's memory map the Stratify chip lives
+*/
+
+#define MAXSWAPSIZE            8 * 1024        //8k *(32bits)
+
+//      Mailboxes
+#define MSG_LENGTH             16      // x16 bits
+#define YES_REPLY                      1
+#define NO_REPLY               0
+
+#define CMV_TIMEOUT            100     //jiffies
+#define MIB_INTERVAL           10000   //msec
+
+/***  Bit definitions ***/
+
+#define FALSE  0
+#define TRUE   1
+#define BIT0   1<<0
+#define BIT1   1<<1
+#define BIT2   1<<2
+#define BIT3   1<<3
+#define BIT4   1<<4
+#define BIT5   1<<5
+#define BIT6   1<<6
+#define BIT7   1<<7
+#define BIT8   1<<8
+#define BIT9   1<<9
+#define BIT10  1<<10
+#define BIT11  1<<11
+#define BIT12  1<<12
+#define BIT13  1<<13
+#define BIT14  1<<14
+#define BIT15  1<<15
+#define BIT16  1<<16
+#define BIT17  1<<17
+#define BIT18  1<<18
+#define BIT19  1<<19
+#define BIT20  1<<20
+#define BIT21  1<<21
+#define BIT22  1<<22
+#define BIT23  1<<23
+#define BIT24  1<<24
+#define BIT25  1<<25
+#define BIT26  1<<26
+#define BIT27  1<<27
+#define BIT28  1<<28
+#define BIT29  1<<29
+#define BIT30  1<<30
+#define BIT31  1<<31
+
+// ARC register addresss 
+#define ARC_STATUS                             0x0
+#define ARC_LP_START                           0x2
+#define ARC_LP_END                             0x3
+#define ARC_DEBUG                              0x5
+#define ARC_INT_MASK                           0x10A
+
+#define IRAM0_BASE                             (0x00000)
+#define IRAM1_BASE                             (0x04000)
+#define BRAM_BASE                              (0x0A000)
+
+#define ADSL_BASE                              (0x20000)
+#define CRI_BASE                               (ADSL_BASE + 0x11F00)
+#define CRI_CCR0                               (CRI_BASE + 0x00)
+#define CRI_RST                                        (CRI_BASE + 0x04*4)
+#define ADSL_DILV_BASE                                 (ADSL_BASE+0x20000)
+
+//
+#define IRAM0_ADDR_BIT_MASK   0xFFF
+#define IRAM1_ADDR_BIT_MASK   0xFFF
+#define BRAM_ADDR_BIT_MASK    0xFFF
+#define RX_DILV_ADDR_BIT_MASK 0x1FFF
+
+// CRI_CCR0 Register definitions        
+#define CLK_2M_MODE_ENABLE                     BIT6
+#define        ACL_CLK_MODE_ENABLE                     BIT4
+#define FDF_CLK_MODE_ENABLE                    BIT2
+#define STM_CLK_MODE_ENABLE                    BIT0
+
+// CRI_RST Register definitions 
+#define FDF_SRST                               BIT3
+#define MTE_SRST                               BIT2
+#define FCI_SRST                               BIT1
+#define AAI_SRST                               BIT0
+
+//      MEI_TO_ARC_INTERRUPT Register definitions
+#define        MEI_TO_ARC_INT1                 BIT3
+#define        MEI_TO_ARC_INT0                 BIT2
+#define MEI_TO_ARC_CS_DONE             BIT1    //need to check
+#define        MEI_TO_ARC_MSGAV                BIT0
+
+//      ARC_TO_MEI_INTERRUPT Register definitions
+#define        ARC_TO_MEI_INT1                 BIT8
+#define        ARC_TO_MEI_INT0                 BIT7
+#define        ARC_TO_MEI_CS_REQ               BIT6
+#define        ARC_TO_MEI_DBG_DONE             BIT5
+#define        ARC_TO_MEI_MSGACK               BIT4
+#define        ARC_TO_MEI_NO_ACCESS            BIT3
+#define        ARC_TO_MEI_CHECK_AAITX          BIT2
+#define        ARC_TO_MEI_CHECK_AAIRX          BIT1
+#define        ARC_TO_MEI_MSGAV                BIT0
+
+//      ARC_TO_MEI_INTERRUPT_MASK Register definitions
+#define        GP_INT1_EN                      BIT8
+#define        GP_INT0_EN                      BIT7
+#define        CS_REQ_EN                       BIT6
+#define        DBG_DONE_EN                     BIT5
+#define        MSGACK_EN                       BIT4
+#define        NO_ACC_EN                       BIT3
+#define        AAITX_EN                        BIT2
+#define        AAIRX_EN                        BIT1
+#define        MSGAV_EN                        BIT0
+
+#define        MEI_SOFT_RESET                  BIT0
+
+#define        HOST_MSTR                       BIT0
+
+#define JTAG_MASTER_MODE               0x0
+#define MEI_MASTER_MODE                        HOST_MSTR
+
+//      MEI_DEBUG_DECODE Register definitions
+#define MEI_DEBUG_DEC_MASK             (0x3)
+#define MEI_DEBUG_DEC_AUX_MASK         (0x0)
+#define MEI_DEBUG_DEC_DMP1_MASK                (0x1)
+#define MEI_DEBUG_DEC_DMP2_MASK                (0x2)
+#define MEI_DEBUG_DEC_CORE_MASK         (0x3)
+
+#define AUX_STATUS                     (0x0)
+//      ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
+//      page swap requests.
+#define MEI_TO_ARC_MAILBOX             (0xDFD0)
+#define MEI_TO_ARC_MAILBOXR            (MEI_TO_ARC_MAILBOX + 0x2C)
+
+#define        ARC_TO_MEI_MAILBOX              (0xDFA0)
+#define ARC_MEI_MAILBOXR               (ARC_TO_MEI_MAILBOX + 0x2C)
+
+// Codeswap request messages are indicated by setting BIT31 
+#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK     (0x80000000)
+
+// Clear Eoc messages received are indicated by setting BIT17 
+#define OMB_CLEAREOC_INTERRUPT_CODE    (0x00020000)
+
+/*
+**     Swap page header
+*/
+//      Page must be loaded at boot time if size field has BIT31 set
+#define BOOT_FLAG      (BIT31)
+#define BOOT_FLAG_MASK ~BOOT_FLAG
+
+#define FREE_RELOAD            1
+#define FREE_SHOWTIME          2
+#define FREE_ALL               3
+
+#define IFX_POP_EOC_DONE       0
+#define IFX_POP_EOC_FAIL       -1
+
+#define CLREOC_BUFF_SIZE       12      //number of clreoc commands being buffered
+
+// marcos
+#define        IFXMIPS_WRITE_REGISTER_L(data,addr)     do{ *((volatile u32*)(addr)) = (u32)(data);} while (0)
+#define IFXMIPS_READ_REGISTER_L(addr)  (*((volatile u32*)(addr)))
+#define SET_BIT(reg, mask)                  reg |= (mask)
+#define CLEAR_BIT(reg, mask)                reg &= (~mask)
+#define CLEAR_BITS(reg, mask)               CLEAR_BIT(reg, mask)
+#define SET_BITS(reg, mask)                 SET_BIT(reg, mask)
+#define SET_BITFIELD(reg, mask, off, val)   {reg &= (~mask); reg |= (val << off);}
+
+#define ALIGN_SIZE                         ( 1L<<10 )  //1K size align
+#define MEM_ALIGN(addr)                    (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) )
+
+// swap marco
+#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);}
+#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);}
+
+//      Swap page header describes size in 32-bit words, load location, and image offset
+//      for program and/or data segments
+typedef struct _arc_swp_page_hdr {
+       u32 p_offset;           //Offset bytes of progseg from beginning of image
+       u32 p_dest;             //Destination addr of progseg on processor
+       u32 p_size;             //Size in 32-bitwords of program segment
+       u32 d_offset;           //Offset bytes of dataseg from beginning of image
+       u32 d_dest;             //Destination addr of dataseg on processor
+       u32 d_size;             //Size in 32-bitwords of data segment
+} ARC_SWP_PAGE_HDR;
+
+#ifdef CONFIG_PROC_FS
+typedef struct reg_entry {
+       int *flag;
+       char name[30];          // big enough to hold names
+       char description[100];  // big enough to hold description
+       unsigned short low_ino;
+} reg_entry_t;
+#endif
+
+/*
+**     Swap image header
+*/
+#define GET_PROG       0       //      Flag used for program mem segment
+#define GET_DATA       1       //      Flag used for data mem segment
+
+//      Image header contains size of image, checksum for image, and count of
+//      page headers. Following that are 'count' page headers followed by
+//      the code and/or data segments to be loaded
+typedef struct _arc_img_hdr {
+       u32 size;               //      Size of binary image in bytes
+       u32 checksum;           //      Checksum for image
+       u32 count;              //      Count of swp pages in image
+       ARC_SWP_PAGE_HDR page[1];       //      Should be "count" pages - '1' to make compiler happy
+} ARC_IMG_HDR;
+
+typedef struct smmu_mem_info {
+       int type;
+       unsigned long nCopy;
+       unsigned long size;
+       unsigned char *address;
+       unsigned char *org_address;
+} smmu_mem_info_t;
+
+/*
+**     Native size for the Stratiphy interface is 32-bits. All reads and writes
+**     MUST be aligned on 32-bit boundaries. Trickery must be invoked to read word and/or
+**     byte data. Read routines are provided. Write routines are probably a bad idea, as the
+**     Arc has unrestrained, unseen access to the same memory, so a read-modify-write cycle
+**     could very well have unintended results.
+*/
+MEI_ERROR meiCMV (u16 *, int, u16 *);  // first arg is CMV to ARC, second to indicate whether need reply
+
+MEI_ERROR meiDebugWrite (u32 destaddr, u32 * databuff, u32 databuffsize);
+extern int ifx_mei_hdlc_send (char *hdlc_pkt, int hdlc_pkt_len);
+extern int ifx_mei_hdlc_read (char *hdlc_pkt, int max_hdlc_pkt_len);
+#if defined(__KERNEL__) || defined (IFXMIPS_PORT_RTEMS)
+extern void makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size,
+                    u16 * data, u16 * CMVMSG);
+int ifx_mei_hdlc_send (char *, int);
+int ifx_mei_hdlc_read (char *, int);
+#endif
+
+#endif
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_app.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_app.h
new file mode 100644 (file)
index 0000000..cba742e
--- /dev/null
@@ -0,0 +1,116 @@
+/******************************************************************************
+**
+** FILE NAME    : ifxmips_mei_app.h
+** PROJECT      : Danube
+** MODULES      : MEI
+**
+** DATE         : 1 Jan 2006
+** AUTHOR       : TC Chen
+** DESCRIPTION  : MEI Driver
+** COPYRIGHT    :       Copyright (c) 2006
+**                      Infineon Technologies AG
+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+**    This program is free software; you can redistribute it and/or modify
+**    it under the terms of the GNU General Public License as published by
+**    the Free Software Foundation; either version 2 of the License, or
+**    (at your option) any later version.
+**
+** HISTORY
+** $Version $Date      $Author     $Comment
+*******************************************************************************/
+#ifndef        _IFXMIPS_MEI_APP_H
+#define                _IFXMIPS_MEI_APP_H
+               //  ioctl control
+#define IFXMIPS_MEI_START                              300
+#define IFXMIPS_MEI_REPLY                              301
+#define IFXMIPS_MEI_NOREPLY                            302
+
+#define IFXMIPS_MEI_RESET                              303
+#define IFXMIPS_MEI_REBOOT                             304
+#define IFXMIPS_MEI_HALT                                       305
+#define IFXMIPS_MEI_CMV_WINHOST                                306
+#define IFXMIPS_MEI_CMV_READ                           307
+#define IFXMIPS_MEI_CMV_WRITE                          308
+#define IFXMIPS_MEI_MIB_DAEMON                         309
+#define IFXMIPS_MEI_SHOWTIME                           310
+#define IFXMIPS_MEI_REMOTE                             311
+#define IFXMIPS_MEI_READDEBUG                          312
+#define IFXMIPS_MEI_WRITEDEBUG                         313
+#define IFXMIPS_MEI_LOP                                        314
+
+#define IFXMIPS_MEI_PCM_SETUP                          315
+#define IFXMIPS_MEI_PCM_START_TIMER                    316
+#define IFXMIPS_MEI_PCM_STOP_TIMER                     317
+#define IFXMIPS_MEI_PCM_CHECK                          318
+#define IFXMIPS_MEI_GET_EOC_LEN                                319
+#define IFXMIPS_MEI_GET_EOC_DATA                               320
+#define IFXMIPS_MEI_PCM_GETDATA                                321
+#define IFXMIPS_MEI_PCM_GPIO                           322
+#define IFXMIPS_MEI_EOC_SEND                           323
+#define IFXMIPS_MEI_DOWNLOAD                           326
+#define IFXMIPS_MEI_JTAG_ENABLE                                327
+#define IFXMIPS_MEI_RUN                                        328
+#define IFXMIPS_MEI_DEBUG_MODE                         329
+
+/* Loop diagnostics mode of the ADSL line related constants */
+#define SET_ADSL_LOOP_DIAGNOSTICS_MODE                         330
+#define GET_ADSL_LOOP_DIAGNOSTICS_MODE                         331
+#define LOOP_DIAGNOSTIC_MODE_COMPLETE                   332
+#define IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE         333
+
+/* L3 Power Mode */
+/* Get current Power Moaagement Mode Status*/
+#define GET_POWER_MANAGEMENT_MODE                      334
+/* Set L3 Power Mode /disable L3 power mode */
+#define SET_L3_POWER_MODE                              335
+
+/* get current dual latency configuration */
+#define GET_ADSL_DUAL_LATENCY                          336
+/* enable/disable dual latency path */
+#define SET_ADSL_DUAL_LATENCY                          337
+
+/* Enable/Disable autoboot mode. */
+/* When the autoboot mode is disabled, the driver will excute some cmv 
+   commands for led control and dual latency when DSL startup.*/
+#define AUTOBOOT_ENABLE_SET                            338
+
+/* Enable/Disable Quiet Mode*/
+/* Quiet mode is used for firmware debug. if the quiet mode enable, the autoboot daemon will not reset arc when the arc need to reboot */
+#define QUIET_MODE_GET                                 339
+#define QUIET_MODE_SET                                 340
+
+/* Enable/Disable showtime lock*/
+/* showtime lock is used for firmware debug. if the showtime lock enable, the autoboot daemon will not reset arc when the arc reach showtime and need to reboot */
+#define SHOWTIME_LOCK_GET                              341
+#define SHOWTIME_LOCK_SET                              342
+
+#define L0_POWER_MODE 0
+#define L2_POWER_MODE 2
+#define L3_POWER_MODE 3
+
+#define DUAL_LATENCY_US_DS_DISABLE                     0
+#define DUAL_LATENCY_US_ENABLE                         (1<<0)
+#define DUAL_LATENCY_DS_ENABLE                         (1<<1)
+#define DUAL_LATENCY_US_DS_ENABLE                      (DUAL_LATENCY_US_ENABLE|DUAL_LATENCY_DS_ENABLE)
+
+#define ME_HDLC_IDLE 0
+#define ME_HDLC_INVALID_MSG 1
+#define ME_HDLC_MSG_QUEUED 2
+#define ME_HDLC_MSG_SENT 3
+#define ME_HDLC_RESP_RCVD 4
+#define ME_HDLC_RESP_TIMEOUT 5
+#define ME_HDLC_RX_BUF_OVERFLOW 6
+#define ME_HDLC_UNRESOLVED 1
+#define ME_HDLC_RESOLVED 2
+
+/***   Enums    ***/
+typedef enum mei_error {
+       MEI_SUCCESS = 0,
+       MEI_FAILURE = -1,
+       MEI_MAILBOX_FULL = -2,
+       MEI_MAILBOX_EMPTY = -3,
+       MEI_MAILBOX_TIMEOUT = -4,
+} MEI_ERROR;
+
+#endif
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_app_ioctl.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_app_ioctl.h
new file mode 100644 (file)
index 0000000..08c3dd3
--- /dev/null
@@ -0,0 +1,1191 @@
+/******************************************************************************
+**
+** FILE NAME    : ifxmips_mei_app_ioctl.h
+** PROJECT      : Danube
+** MODULES      : MEI
+**
+** DATE         : 1 Jan 2006
+** AUTHOR       : TC Chen
+** DESCRIPTION  : MEI Driver
+** COPYRIGHT    :       Copyright (c) 2006
+**                      Infineon Technologies AG
+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+**    This program is free software; you can redistribute it and/or modify
+**    it under the terms of the GNU General Public License as published by
+**    the Free Software Foundation; either version 2 of the License, or
+**    (at your option) any later version.
+**
+** HISTORY
+** $Version $Date      $Author     $Comment
+*******************************************************************************/
+#ifndef __IFXMIPS_MEI_APP_IOCTL_H
+#define __IFXMIPS_MEI_APP_IOCTL_H
+
+#ifdef __KERNEL__
+#include "ifxmips_mei_ioctl.h"
+#endif
+
+/* Interface Name */
+//#define INTERFACE_NAME <define the interface>
+
+/* adslLineTable constants */
+#define GET_ADSL_LINE_CODE             1
+
+/* adslAtucPhysTable constants */
+#define GET_ADSL_ATUC_PHY              4
+
+/* adslAturPhysTable constants */
+#define GET_ADSL_ATUR_PHY              10
+
+/* adslAtucChanTable constants */
+#define GET_ADSL_ATUC_CHAN_INFO        15
+
+/* adslAturChanTable constants */
+#define GET_ADSL_ATUR_CHAN_INFO                18
+
+/* adslAtucPerfDataTable constants */
+#define GET_ADSL_ATUC_PERF_DATA                21
+
+/* adslAturPerfDataTable constants */
+#define GET_ADSL_ATUR_PERF_DATA                40
+
+/* adslAtucIntervalTable constants */
+#define GET_ADSL_ATUC_INTVL_INFO       60
+
+/* adslAturIntervalTable constants */
+#define GET_ADSL_ATUR_INTVL_INFO       65
+
+/* adslAtucChanPerfDataTable constants */
+#define GET_ADSL_ATUC_CHAN_PERF_DATA   70
+
+/* adslAturChanPerfDataTable constants */
+#define GET_ADSL_ATUR_CHAN_PERF_DATA   90
+
+/* adslAtucChanIntervalTable constants */
+#define GET_ADSL_ATUC_CHAN_INTVL_INFO  110
+
+/* adslAturChanIntervalTable constants */
+#define GET_ADSL_ATUR_CHAN_INTVL_INFO  115
+
+/* adslLineAlarmConfProfileTable constants */
+#define GET_ADSL_ALRM_CONF_PROF                120
+#define SET_ADSL_ALRM_CONF_PROF                121
+
+/* adslAturTrap constants */
+#define ADSL_ATUR_TRAPS                        135
+
+//////////////////  RFC-3440 //////////////
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+/* adslLineExtTable */
+#define GET_ADSL_ATUC_LINE_EXT         201
+#define SET_ADSL_ATUC_LINE_EXT         203
+
+/* adslAtucPerfDateExtTable */
+#define GET_ADSL_ATUC_PERF_DATA_EXT    205
+
+/* adslAtucIntervalExtTable */
+#define GET_ADSL_ATUC_INTVL_EXT_INFO   221
+
+/* adslAturPerfDataExtTable */
+#define GET_ADSL_ATUR_PERF_DATA_EXT    225
+
+/* adslAturIntervalExtTable */
+#define GET_ADSL_ATUR_INTVL_EXT_INFO   233
+
+/* adslAlarmConfProfileExtTable */
+#define GET_ADSL_ALRM_CONF_PROF_EXT    235
+#define SET_ADSL_ALRM_CONF_PROF_EXT    236
+
+/* adslAturExtTrap */
+#define ADSL_ATUR_EXT_TRAPS            240
+
+#endif
+
+/* The following constants are added to support the WEB related ADSL Statistics */
+
+/* adslLineStatus constants */
+#define GET_ADSL_LINE_STATUS           245
+
+/* adslLineRate constants */
+#define GET_ADSL_LINE_RATE             250
+
+/* adslLineInformation constants */
+#define GET_ADSL_LINE_INFO             255
+
+/* adslNearEndPerformanceStats constants */
+#define GET_ADSL_NEAREND_STATS 270
+
+/* adslFarEndPerformanceStats constants */
+#define GET_ADSL_FAREND_STATS  290
+
+/* Sub-carrier related parameters */
+#define GET_ADSL_LINE_INIT_STATS       150
+#define GET_ADSL_POWER_SPECTRAL_DENSITY        151
+
+#define IFXMIPS_MIB_LO_ATUC            295
+#define IFXMIPS_MIB_LO_ATUR            296
+
+#define GET_ADSL_ATUC_SUBCARRIER_STATS 297
+#define GET_ADSL_ATUR_SUBCARRIER_STATS 298
+
+
+
+///////////////////////////////////////////////////////////
+// makeCMV(Opcode, Group, Address, Index, Size, Data)
+
+/* adslLineCode Flags */
+#define LINE_CODE_FLAG                 0x1     /* BIT 0th position */
+
+/* adslAtucPhysTable Flags */
+#define ATUC_PHY_SER_NUM_FLAG          0x1     /* BIT 0th position */
+#define ATUC_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 57, 0, 12, data,TxMessage) 
+#define ATUC_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 57, 12, 4, data,TxMessage) 
+
+#define ATUC_PHY_VENDOR_ID_FLAG                0x2     /* BIT 1 */
+#define ATUC_PHY_VENDOR_ID_FLAG_MAKECMV        makeCMV(H2D_CMV_READ, INFO, 64, 0, 4, data,TxMessage)
+
+#define ATUC_PHY_VER_NUM_FLAG          0x4     /* BIT 2 */
+#define ATUC_PHY_VER_NUM_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 58, 0, 8, data,TxMessage)
+
+#define ATUC_CURR_STAT_FLAG            0x8     /* BIT 3 */
+
+#define ATUC_CURR_OUT_PWR_FLAG         0x10    /* BIT 4 */
+#define ATUC_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 5, 1, data,TxMessage)
+
+#define ATUC_CURR_ATTR_FLAG            0x20    /* BIT 5 */
+#define ATUC_CURR_ATTR_FLAG_MAKECMV    makeCMV(H2D_CMV_READ, INFO, 69, 0, 2, data,TxMessage)
+
+
+/* adslAturPhysTable   Flags */
+#define ATUR_PHY_SER_NUM_FLAG          0x1     /* BIT 0th position */
+#define ATUR_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 62, 0, 12, data,TxMessage)
+#define ATUR_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 62, 12, 4, data,TxMessage)
+
+#define ATUR_PHY_VENDOR_ID_FLAG                0x2     /* BIT 1 */
+#define ATUR_PHY_VENDOR_ID_FLAG_MAKECMV        makeCMV(H2D_CMV_READ, INFO, 65, 0, 4, data,TxMessage)
+
+#define ATUR_PHY_VER_NUM_FLAG          0x4     /* BIT 2 */
+#define ATUR_PHY_VER_NUM_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 61, 0, 8, data,TxMessage)
+
+#define ATUR_SNRMGN_FLAG               0x8
+#if 0 /* [ Ritesh. Use PLAM 45 0 for 0.1dB resolution rather than INFO 68 3 */
+#define ATUR_SNRMGN_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, INFO, 68, 4, 1, data,TxMessage)
+#else
+#define ATUR_SNRMGN_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, PLAM_SNRMargin_0_1db, 0, 1, data, TxMessage)
+#endif
+
+#define ATUR_ATTN_FLAG                 0x10
+#define ATUR_ATTN_FLAG_MAKECMV         makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data,TxMessage)
+
+#define ATUR_CURR_STAT_FLAG            0x20    /* BIT 3 */
+
+#define ATUR_CURR_OUT_PWR_FLAG         0x40    /* BIT 4 */
+#define ATUR_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 5, 1, data,TxMessage)
+
+#define ATUR_CURR_ATTR_FLAG            0x80    /* BIT 5 */
+#define ATUR_CURR_ATTR_FLAG_MAKECMV    makeCMV(H2D_CMV_READ, INFO, 68, 0, 2, data,TxMessage)
+
+/* adslAtucChanTable Flags */
+#define ATUC_CHAN_INTLV_DELAY_FLAG     0x1     /* BIT 0th position */
+//KD #define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV        makeCMV(H2D_CMV_READ, RATE, 3, 1, 1, data,TxMessage)
+#define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV     makeCMV(H2D_CMV_READ, INFO, 92, 1, 1, data,TxMessage)
+
+#define ATUC_CHAN_CURR_TX_RATE_FLAG    0x2     /* BIT 1 */
+#define ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV    makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data,TxMessage)
+
+#define ATUC_CHAN_PREV_TX_RATE_FLAG    0x4     /* BIT 2 */
+
+/* adslAturChanTable Flags */
+#define ATUR_CHAN_INTLV_DELAY_FLAG     0x1     /* BIT 0th position */
+//KD #define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV        makeCMV(H2D_CMV_READ, RATE, 2, 1, 1, data,TxMessage)
+#define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV     makeCMV(H2D_CMV_READ, INFO, 93, 1, 1, data,TxMessage)
+
+#define ATUR_CHAN_CURR_TX_RATE_FLAG    0x2     /* BIT 1 */
+#define ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV    makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data,TxMessage)
+
+#define ATUR_CHAN_PREV_TX_RATE_FLAG    0x4     /* BIT 2 */
+
+#define ATUR_CHAN_CRC_BLK_LEN_FLAG     0x8     /* BIT 3 */
+
+/* adslAtucPerfDataTable Flags */
+#define ATUC_PERF_LOFS_FLAG            0x1     /* BIT 0th position */
+#define ATUC_PERF_LOSS_FLAG            0x2     /* BIT 1 */
+#define ATUC_PERF_LO_FLAG_MAKECMV              makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data,TxMessage)
+#define ATUC_PERF_ESS_FLAG             0x4     /* BIT 2 */
+#define ATUC_PERF_ESS_FLAG_MAKECMV             makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data,TxMessage) 
+#define ATUC_PERF_INITS_FLAG   0x8     /* BIT 3 */
+#define ATUC_PERF_VALID_INTVLS_FLAG    0x10 /* BIT 4 */
+#define ATUC_PERF_INVALID_INTVLS_FLAG  0x20 /* BIT 5 */
+#define ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
+#define ATUC_PERF_CURR_15MIN_LOFS_FLAG         0x80     /* BIT 7 */
+#define ATUC_PERF_CURR_15MIN_LOSS_FLAG         0x100 /* BIT 8 */
+#define ATUC_PERF_CURR_15MIN_ESS_FLAG          0x200   /* BIT 9 */
+#define ATUC_PERF_CURR_15MIN_INIT_FLAG         0x400 /* BIT 10 */
+#define ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
+#define ATUC_PERF_CURR_1DAY_LOFS_FLAG          0x1000 /* BIT 12 */
+#define ATUC_PERF_CURR_1DAY_LOSS_FLAG          0x2000 /* BIT 13 */
+#define ATUC_PERF_CURR_1DAY_ESS_FLAG           0x4000 /* BIT 14 */
+#define ATUC_PERF_CURR_1DAY_INIT_FLAG          0x8000 /* BIT 15 */
+#define ATUC_PERF_PREV_1DAY_MON_SEC_FLAG       0x10000 /* BIT 16 */
+#define ATUC_PERF_PREV_1DAY_LOFS_FLAG          0x20000 /* BIT 17 */
+#define ATUC_PERF_PREV_1DAY_LOSS_FLAG          0x40000 /* BIT 18 */
+#define ATUC_PERF_PREV_1DAY_ESS_FLAG           0x80000 /* BIT 19 */
+#define ATUC_PERF_PREV_1DAY_INITS_FLAG         0x100000 /* BIT 20 */
+
+/* adslAturPerfDataTable Flags */
+#define ATUR_PERF_LOFS_FLAG            0x1     /* BIT 0th position */
+#define ATUR_PERF_LOSS_FLAG            0x2     /* BIT 1 */
+#define ATUR_PERF_LPR_FLAG             0x4     /* BIT 2 */
+#define ATUR_PERF_LO_FLAG_MAKECMV              makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data,TxMessage)
+#define ATUR_PERF_ESS_FLAG             0x8     /* BIT 3 */
+#define ATUR_PERF_ESS_FLAG_MAKECMV             makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data,TxMessage)
+#define ATUR_PERF_VALID_INTVLS_FLAG    0x10 /* BIT 4 */
+#define ATUR_PERF_INVALID_INTVLS_FLAG  0x20 /* BIT 5 */
+#define ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
+#define ATUR_PERF_CURR_15MIN_LOFS_FLAG         0x80     /* BIT 7 */
+#define ATUR_PERF_CURR_15MIN_LOSS_FLAG         0x100 /* BIT 8 */
+#define ATUR_PERF_CURR_15MIN_LPR_FLAG          0x200 /* BIT 9 */
+#define ATUR_PERF_CURR_15MIN_ESS_FLAG          0x400   /* BIT 10 */
+#define ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG  0x800 /* BIT 11 */
+#define ATUR_PERF_CURR_1DAY_LOFS_FLAG          0x1000 /* BIT 12 */
+#define ATUR_PERF_CURR_1DAY_LOSS_FLAG          0x2000 /* BIT 13 */
+#define ATUR_PERF_CURR_1DAY_LPR_FLAG           0x4000 /* BIT 14 */
+#define ATUR_PERF_CURR_1DAY_ESS_FLAG           0x8000 /* BIT 15 */
+#define ATUR_PERF_PREV_1DAY_MON_SEC_FLAG       0x10000 /* BIT 16 */
+#define ATUR_PERF_PREV_1DAY_LOFS_FLAG          0x20000 /* BIT 17 */
+#define ATUR_PERF_PREV_1DAY_LOSS_FLAG          0x40000 /* BIT 18 */
+#define ATUR_PERF_PREV_1DAY_LPR_FLAG           0x80000 /* BIT 19 */
+#define ATUR_PERF_PREV_1DAY_ESS_FLAG           0x100000 /* BIT 20 */
+
+/* adslAtucIntervalTable Flags */
+#define ATUC_INTVL_LOF_FLAG            0x1     /* BIT 0th position */
+#define ATUC_INTVL_LOS_FLAG            0x2     /* BIT 1 */
+#define ATUC_INTVL_ESS_FLAG            0x4     /* BIT 2 */
+#define ATUC_INTVL_INIT_FLAG           0x8   /* BIT 3 */
+#define ATUC_INTVL_VALID_DATA_FLAG     0x10 /* BIT 4 */
+
+/* adslAturIntervalTable Flags */
+#define ATUR_INTVL_LOF_FLAG            0x1     /* BIT 0th position */
+#define ATUR_INTVL_LOS_FLAG            0x2     /* BIT 1 */
+#define ATUR_INTVL_LPR_FLAG            0x4     /* BIT 2 */
+#define ATUR_INTVL_ESS_FLAG            0x8     /* BIT 3 */
+#define ATUR_INTVL_VALID_DATA_FLAG     0x10 /* BIT 4 */
+
+/* adslAtucChanPerfDataTable Flags */
+#define ATUC_CHAN_RECV_BLK_FLAG        0x01    /* BIT 0th position */
+#define ATUC_CHAN_TX_BLK_FLAG  0x02    /* BIT 1 */
+#define ATUC_CHAN_CORR_BLK_FLAG        0x04    /* BIT 2 */
+#define ATUC_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */
+#define ATUC_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */
+#define ATUC_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */
+#define ATUC_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
+#define ATUC_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG        0x80 /* BIT 7 */
+#define ATUC_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */
+#define ATUC_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */
+#define ATUC_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */
+#define ATUC_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11*/
+#define ATUC_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */
+#define ATUC_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */
+#define ATUC_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */
+#define ATUC_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */
+#define ATUC_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */
+#define ATUC_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */
+#define ATUC_CHAN_PERF_PREV_1DAY_TX_BLK_FLAG 0x40000 /* BIT 18 */
+#define ATUC_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */
+#define ATUC_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */
+
+
+/* adslAturChanPerfDataTable Flags */
+#define ATUR_CHAN_RECV_BLK_FLAG   0x01         /* BIT 0th position */ 
+#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW            makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage)
+#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW            makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage)
+#define ATUR_CHAN_TX_BLK_FLAG     0x02         /* BIT 1 */
+#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW              makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage)
+#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW              makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage)
+#define ATUR_CHAN_CORR_BLK_FLAG   0x04         /* BIT 2 */
+#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL           makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data,TxMessage)
+#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST           makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data,TxMessage)
+#define ATUR_CHAN_UNCORR_BLK_FLAG 0x08         /* BIT 3 */
+#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL         makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data,TxMessage)
+#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST         makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data,TxMessage)
+#define ATUR_CHAN_PERF_VALID_INTVL_FLAG   0x10         /* BIT 4 */
+#define ATUR_CHAN_PERF_INVALID_INTVL_FLAG 0x20         /* BIT 5 */
+#define ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
+#define ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG    0x80   /* BIT 7 */
+#define ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG      0x100 /* BIT 8 */
+#define ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG    0x200 /* BIT 9 */
+#define ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG  0x400 /* BIT 10 */
+#define ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
+#define ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG     0x1000 /* BIT 12 */
+#define ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG       0x2000 /* BIT 13 */
+#define ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG     0x4000 /* BIT 14 */
+#define ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG   0x8000 /* BIT 15 */
+#define ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG     0x10000 /* BIT 16 */
+#define ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG     0x20000 /* BIT 17 */
+#define ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG    0x40000 /* BIT 18 */
+#define ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG     0x80000 /* BIT 19 */
+#define ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG   0x100000 /* BIT 20 */
+
+/* adslAtucChanIntervalTable Flags */
+#define ATUC_CHAN_INTVL_NUM_FLAG               0x1     /* BIT 0th position */
+#define ATUC_CHAN_INTVL_RECV_BLK_FLAG                  0x2     /* BIT 1 */
+#define ATUC_CHAN_INTVL_TX_BLK_FLAG            0x4     /* BIT 2 */
+#define ATUC_CHAN_INTVL_CORR_BLK_FLAG          0x8     /* BIT 3 */
+#define ATUC_CHAN_INTVL_UNCORR_BLK_FLAG        0x10    /* BIT 4 */
+#define ATUC_CHAN_INTVL_VALID_DATA_FLAG        0x20    /* BIT 5 */
+
+/* adslAturChanIntervalTable Flags */
+#define ATUR_CHAN_INTVL_NUM_FLAG               0x1     /* BIT 0th Position */
+#define ATUR_CHAN_INTVL_RECV_BLK_FLAG                  0x2     /* BIT 1 */
+#define ATUR_CHAN_INTVL_TX_BLK_FLAG            0x4     /* BIT 2 */
+#define ATUR_CHAN_INTVL_CORR_BLK_FLAG          0x8     /* BIT 3 */
+#define ATUR_CHAN_INTVL_UNCORR_BLK_FLAG        0x10    /* BIT 4 */
+#define ATUR_CHAN_INTVL_VALID_DATA_FLAG        0x20    /* BIT 5 */
+
+/* adslLineAlarmConfProfileTable Flags */
+#define ATUC_THRESH_15MIN_LOFS_FLAG            0x01   /* BIT 0th position */
+#define ATUC_THRESH_15MIN_LOSS_FLAG            0x02   /* BIT 1 */
+#define ATUC_THRESH_15MIN_ESS_FLAG             0x04   /* BIT 2 */
+#define ATUC_THRESH_FAST_RATEUP_FLAG           0x08   /* BIT 3 */
+#define ATUC_THRESH_INTERLEAVE_RATEUP_FLAG     0x10   /* BIT 4 */
+#define ATUC_THRESH_FAST_RATEDOWN_FLAG         0x20     /* BIT 5 */
+#define ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG           0x40    /* BIT 6 */
+#define ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG     0x80    /* BIT 7 */
+#define ATUR_THRESH_15MIN_LOFS_FLAG            0x100   /* BIT 8 */
+#define ATUR_THRESH_15MIN_LOSS_FLAG            0x200   /* BIT 9 */
+#define ATUR_THRESH_15MIN_LPRS_FLAG                    0x400   /* BIT 10 */
+#define ATUR_THRESH_15MIN_ESS_FLAG             0x800           /* BIT 11 */
+#define ATUR_THRESH_FAST_RATEUP_FLAG           0x1000          /* BIT 12 */
+#define ATUR_THRESH_INTERLEAVE_RATEUP_FLAG     0x2000          /* BIT 13 */
+#define ATUR_THRESH_FAST_RATEDOWN_FLAG         0x4000  /* BIT 14 */
+#define ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG   0x8000          /* BIT 15 */
+#define LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG  0x10000        /* BIT 16 */
+
+
+/* adslAturTraps Flags */
+#define ATUC_PERF_LOFS_THRESH_FLAG             0x1     /* BIT 0th position */
+#define ATUC_PERF_LOSS_THRESH_FLAG             0x2     /* BIT 1 */
+#define ATUC_PERF_ESS_THRESH_FLAG              0x4     /* BIT 2 */
+#define ATUC_RATE_CHANGE_FLAG                  0x8     /* BIT 3 */
+#define ATUR_PERF_LOFS_THRESH_FLAG             0x10    /* BIT 4 */
+#define ATUR_PERF_LOSS_THRESH_FLAG             0x20    /* BIT 5 */
+#define ATUR_PERF_LPRS_THRESH_FLAG             0x40    /* BIT 6 */
+#define ATUR_PERF_ESS_THRESH_FLAG              0x80    /* BIT 7 */
+#define ATUR_RATE_CHANGE_FLAG                  0x100   /* BIT 8 */
+
+//RFC- 3440 FLAG DEFINITIONS
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+/* adslLineExtTable flags */
+#define ATUC_LINE_TRANS_CAP_FLAG               0x1             /* BIT 0th position */
+#define ATUC_LINE_TRANS_CAP_FLAG_MAKECMV       makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage)
+#define ATUC_LINE_TRANS_CONFIG_FLAG            0x2             /* BIT 1 */
+#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV    makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage)
+#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR makeCMV(H2D_CMV_WRITE,INFO, 67, 0, 1, data,TxMessage)
+#define ATUC_LINE_TRANS_ACTUAL_FLAG            0x4             /* BIT 2 */
+#define ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV    makeCMV(H2D_CMV_READ,STAT, 1, 0, 1, data,TxMessage)
+#define LINE_GLITE_POWER_STATE_FLAG            0x8             /* BIT 3 */
+#define LINE_GLITE_POWER_STATE_FLAG_MAKECMV    makeCMV(H2D_CMV_READ,STAT, 0, 0, 1, data,TxMessage) 
+
+/* adslAtucPerfDataExtTable flags */
+#define ATUC_PERF_STAT_FASTR_FLAG         0x1 /* BIT 0th position */
+#define ATUC_PERF_STAT_FASTR_FLAG_MAKECMV      makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage)
+#define ATUC_PERF_STAT_FAILED_FASTR_FLAG 0x2 /* BIT 1 */
+#define ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage)
+#define ATUC_PERF_STAT_SESL_FLAG          0X4  /* BIT 2 */
+#define ATUC_PERF_STAT_SESL_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage)
+#define ATUC_PERF_STAT_UASL_FLAG                  0X8  /* BIT 3 */
+#define ATUC_PERF_STAT_UASL_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage)
+#define ATUC_PERF_CURR_15MIN_FASTR_FLAG           0X10 /* BIT 4 */
+#define ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG 0X20    /* BIT 5 */
+#define ATUC_PERF_CURR_15MIN_SESL_FLAG          0X40   /* BIT 6 */
+#define ATUC_PERF_CURR_15MIN_UASL_FLAG             0X80        /* BIT 7 */
+#define ATUC_PERF_CURR_1DAY_FASTR_FLAG             0X100       /* BIT 8 */
+#define ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG  0X200   /* BIT 9 */
+#define ATUC_PERF_CURR_1DAY_SESL_FLAG                  0X400   /* BIT 10 */
+#define ATUC_PERF_CURR_1DAY_UASL_FLAG                  0X800   /* BIT 11 */
+#define ATUC_PERF_PREV_1DAY_FASTR_FLAG              0X1000 /* BIT 12 */
+#define ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG  0X2000 /* BIT 13 */
+#define ATUC_PERF_PREV_1DAY_SESL_FLAG                  0X4000 /* BIT 14 */
+#define ATUC_PERF_PREV_1DAY_UASL_FLAG                  0X8000 /* BIT 15 */
+
+/* adslAturPerfDataExtTable */
+#define ATUR_PERF_STAT_SESL_FLAG               0X1 /* BIT 0th position */
+#define ATUR_PERF_STAT_SESL_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage)  
+#define ATUR_PERF_STAT_UASL_FLAG               0X2 /* BIT 1 */
+#define ATUR_PERF_STAT_UASL_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage)
+#define ATUR_PERF_CURR_15MIN_SESL_FLAG         0X4 /* BIT 2 */
+#define ATUR_PERF_CURR_15MIN_UASL_FLAG         0X8 /* BIT 3 */
+#define ATUR_PERF_CURR_1DAY_SESL_FLAG          0X10 /* BIT 4 */
+#define ATUR_PERF_CURR_1DAY_UASL_FLAG          0X20 /* BIT 5 */
+#define ATUR_PERF_PREV_1DAY_SESL_FLAG          0X40 /* BIT 6 */
+#define ATUR_PERF_PREV_1DAY_UASL_FLAG          0X80 /* BIT 7 */
+
+/* adslAutcIntervalExtTable flags */
+#define ATUC_INTERVAL_FASTR_FLAG               0x1 /* Bit 0 */         
+#define ATUC_INTERVAL_FAILED_FASTR_FLAG                0x2 /* Bit 1 */         
+#define ATUC_INTERVAL_SESL_FLAG                        0x4 /* Bit 2 */         
+#define ATUC_INTERVAL_UASL_FLAG                        0x8 /* Bit 3 */         
+
+/* adslAturIntervalExtTable */
+#define ATUR_INTERVAL_SESL_FLAG                0X1 /* BIT 0th position */
+#define ATUR_INTERVAL_UASL_FLAG                0X2 /* BIT 1 */
+
+/* adslAlarmConfProfileExtTable */
+#define ATUC_THRESH_15MIN_FAILED_FASTR_FLAG 0X1/* BIT 0th position */
+#define ATUC_THRESH_15MIN_SESL_FLAG             0X2 /* BIT 1 */
+#define ATUC_THRESH_15MIN_UASL_FLAG             0X4 /* BIT 2 */
+#define ATUR_THRESH_15MIN_SESL_FLAG             0X8 /* BIT 3 */
+#define ATUR_THRESH_15MIN_UASL_FLAG             0X10 /* BIT 4 */
+
+/* adslAturExtTraps */
+#define ATUC_15MIN_FAILED_FASTR_TRAP_FLAG      0X1 /* BIT 0th position */
+#define ATUC_15MIN_SESL_TRAP_FLAG               0X2 /* BIT 1 */
+#define ATUC_15MIN_UASL_TRAP_FLAG               0X4 /* BIT 2 */
+#define ATUR_15MIN_SESL_TRAP_FLAG               0X8 /* BIT 3 */
+#define ATUR_15MIN_UASL_TRAP_FLAG               0X10 /* BIT 4 */
+
+#endif
+
+/* adslLineStatus Flags */
+#define LINE_STAT_MODEM_STATUS_FLAG     0x1 /* BIT 0th position */
+#define LINE_STAT_MODEM_STATUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage)
+#define LINE_STAT_MODE_SEL_FLAG         0x2 /* BIT 1 */
+#define LINE_STAT_MODE_SEL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data, TxMessage)
+#define LINE_STAT_TRELLCOD_ENABLE_FLAG 0x4 /* BIT 2 */
+#define LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, OPTN, 2, 0, 1, data, TxMessage)
+#define LINE_STAT_LATENCY_FLAG          0x8 /* BIT 3 */
+#define LINE_STAT_LATENCY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data, TxMessage)
+
+/* adslLineRate Flags */
+#define LINE_RATE_DATA_RATEDS_FLAG     0x1 /* BIT 0th position */
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 2, 2, data, TxMessage)
+
+
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 0, 2, data, TxMessage)
+
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 2, 2, data, TxMessage)
+
+#define LINE_RATE_DATA_RATEUS_FLAG     0x2 /* BIT 1 */
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 2, 2, data, TxMessage)
+
+
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 0, 2, data, TxMessage)
+
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 2, 2, data, TxMessage)
+
+#define LINE_RATE_ATTNDRDS_FLAG        0x4 /* BIT 2 */
+#define LINE_RATE_ATTNDRDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 2, data, TxMessage)
+
+#define LINE_RATE_ATTNDRUS_FLAG                0x8 /* BIT 3 */
+#define LINE_RATE_ATTNDRUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 4, 2, data, TxMessage)
+
+/* adslLineInformation Flags */
+#define LINE_INFO_INTLV_DEPTHDS_FLAG   0x1 /* BIT 0th position */
+#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV       makeCMV(H2D_CMV_READ, CNFG, 27, 0, 1, data, TxMessage)
+#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV       makeCMV(H2D_CMV_READ, CNFG, 27, 1, 1, data, TxMessage)
+#define LINE_INFO_INTLV_DEPTHUS_FLAG   0x2 /* BIT 1 */
+#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV       makeCMV(H2D_CMV_READ, CNFG, 16, 0, 1, data, TxMessage)
+#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV       makeCMV(H2D_CMV_READ, CNFG, 16, 1, 1, data, TxMessage)
+#define LINE_INFO_LATNDS_FLAG          0x4 /* BIT 2 */
+#define LINE_INFO_LATNDS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 68, 1, 1, data, TxMessage)
+#define LINE_INFO_LATNUS_FLAG          0x8 /* BIT 3 */
+#define LINE_INFO_LATNUS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 69, 1, 1, data, TxMessage)
+#define LINE_INFO_SATNDS_FLAG                  0x10 /* BIT 4 */
+#define LINE_INFO_SATNDS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data, TxMessage)
+#define LINE_INFO_SATNUS_FLAG                  0x20 /* BIT 5 */
+#define LINE_INFO_SATNUS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 69, 2, 1, data, TxMessage)
+#define LINE_INFO_SNRMNDS_FLAG                 0x40 /* BIT 6 */
+#define LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV   makeCMV(H2D_CMV_READ, INFO, 68, 3, 1, data, TxMessage)
+#define LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV   makeCMV(H2D_CMV_READ, RATE, 3, 0, 1, data, TxMessage)
+#define LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 46, 0, 1, data, TxMessage)
+#define LINE_INFO_SNRMNUS_FLAG                 0x80 /* BIT 7 */
+#define LINE_INFO_SNRMNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 3, 1, data, TxMessage)
+#define LINE_INFO_ACATPDS_FLAG         0x100 /* BIT 8 */
+#define LINE_INFO_ACATPDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 6, 1, data, TxMessage)
+#define LINE_INFO_ACATPUS_FLAG         0x200 /* BIT 9 */
+#define LINE_INFO_ACATPUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 6, 1, data, TxMessage)
+
+/* adslNearEndPerformanceStats Flags */
+#define NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data, TxMessage)
+#define NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data, TxMessage)
+#define NEAREND_PERF_SUPERFRAME_FLAG   0x1 /* BIT 0th position */
+#define NEAREND_PERF_LOS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data, TxMessage)
+#define NEAREND_PERF_LOS_FLAG          0x2 /* BIT 1 */
+#define NEAREND_PERF_LOF_FLAG          0x4 /* BIT 2 */
+#define NEAREND_PERF_LPR_FLAG          0x8 /* BIT 3 */
+#define NEAREND_PERF_NCD_FLAG          0x10 /* BIT 4 */
+#define NEAREND_PERF_LCD_FLAG          0x20 /* BIT 5 */
+#define NEAREND_PERF_CRC_FLAG          0x40 /* BIT 6 */
+#define NEAREND_PERF_CRC_FLAG_LP0_MAKECMV      makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data, TxMessage)
+#define NEAREND_PERF_CRC_FLAG_LP1_MAKECMV      makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data, TxMessage)
+#define NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data, TxMessage)
+#define NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data, TxMessage)
+#define NEAREND_PERF_RSCORR_FLAG       0x80 /* BIT 7 */
+#define NEAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 6, 0, 1, data, TxMessage)
+#define NEAREND_PERF_FECS_FLAG         0x100 /* BIT 8 */
+#define NEAREND_PERF_ES_FLAG_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data, TxMessage)
+#define NEAREND_PERF_ES_FLAG           0x200 /* BIT 9 */
+#define NEAREND_PERF_SES_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage)
+#define NEAREND_PERF_SES_FLAG          0x400 /* BIT 10 */
+#define NEAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 9, 0, 1, data, TxMessage)
+#define NEAREND_PERF_LOSS_FLAG         0x800 /* BIT 11 */
+#define NEAREND_PERF_UAS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage)
+#define NEAREND_PERF_UAS_FLAG          0x1000 /* BIT 12 */
+#define NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 11, 0, 2, data, TxMessage)
+#define NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 11, 2, 2, data, TxMessage)
+#define NEAREND_PERF_HECERR_FLAG               0x2000 /* BIT 13 */
+
+/* adslFarEndPerformanceStats Flags */
+#define FAREND_PERF_LOS_FLAG_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data, TxMessage)
+#define FAREND_PERF_LOS_FLAG   0x1 /* BIT 0th position */
+#define FAREND_PERF_LOF_FLAG   0x2 /* BIT 1 */
+#define FAREND_PERF_LPR_FLAG   0x4 /* BIT 2 */
+#define FAREND_PERF_NCD_FLAG   0x8 /* BIT 3 */
+#define FAREND_PERF_LCD_FLAG   0x10 /* BIT 4 */
+#define FAREND_PERF_CRC_FLAG_LP0_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 24, 0, 1, data, TxMessage)
+#define FAREND_PERF_CRC_FLAG_LP1_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 24, 1, 1, data, TxMessage)
+#define FAREND_PERF_CRC_FLAG   0x20 /* BIT 5 */
+#define FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV    makeCMV(H2D_CMV_READ, PLAM, 28, 0, 1, data, TxMessage)
+#define FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV    makeCMV(H2D_CMV_READ, PLAM, 28, 1, 1, data, TxMessage)
+#define FAREND_PERF_RSCORR_FLAG        0x40 /* BIT 6 */
+#define FAREND_PERF_FECS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, PLAM, 32, 0, 1, data, TxMessage)
+#define FAREND_PERF_FECS_FLAG  0x80 /* BIT 7 */
+#define FAREND_PERF_ES_FLAG_MAKECMV    makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data, TxMessage)
+#define FAREND_PERF_ES_FLAG    0x100 /* BIT 8 */
+#define FAREND_PERF_SES_FLAG_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage)
+#define FAREND_PERF_SES_FLAG   0x200 /* BIT 9 */
+#define FAREND_PERF_LOSS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, PLAM, 35, 0, 1, data, TxMessage)
+#define FAREND_PERF_LOSS_FLAG  0x400 /* BIT 10 */
+#define FAREND_PERF_UAS_FLAG_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage)
+#define FAREND_PERF_UAS_FLAG   0x800 /* BIT 11 */
+#define FAREND_PERF_HECERR_FLAG_BC0_MAKECMV    makeCMV(H2D_CMV_READ, PLAM, 37, 0, 2, data, TxMessage)
+#define FAREND_PERF_HECERR_FLAG_BC1_MAKECMV    makeCMV(H2D_CMV_READ, PLAM, 37, 2, 2, data, TxMessage)
+#define FAREND_PERF_HECERR_FLAG        0x1000 /* BIT 12 */
+// 603221:tc.chen end
+/* TR-69 related additional parameters - defines */
+/* Defines for  struct adslATURSubcarrierInfo */
+#define        NEAREND_HLINSC  0x1
+#define NEAREND_HLINSC_MAKECMV(mode)           makeCMV(mode, INFO, 71, 2, 1, data, TxMessage)
+#define        NEAREND_HLINPS  0x2
+#define NEAREND_HLINPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 73, idx, size, data, TxMessage)
+#define        NEAREND_HLOGMT  0x4
+#define NEAREND_HLOGMT_MAKECMV(mode)           makeCMV(mode, INFO, 80, 0, 1, data, TxMessage)
+#define NEAREND_HLOGPS 0x8
+#define NEAREND_HLOGPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 75, idx, size, data, TxMessage)
+#define NEAREND_QLNMT  0x10
+#define NEAREND_QLNMT_MAKECMV(mode)            makeCMV(mode, INFO, 80, 1, 1, data, TxMessage)
+#define        NEAREND_QLNPS   0x20
+#define NEAREND_QLNPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 77, idx, size, data, TxMessage)
+#define        NEAREND_SNRMT   0x40
+#define NEAREND_SNRMT_MAKECMV(mode)            makeCMV(mode, INFO, 80, 2, 1, data, TxMessage)
+#define        NEAREND_SNRPS   0x80
+#define NEAREND_SNRPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 78, idx, size, data, TxMessage)
+#define        NEAREND_BITPS   0x100
+#define NEAREND_BITPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 22, idx, size, data, TxMessage)
+#define        NEAREND_GAINPS  0x200
+#define NEAREND_GAINPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 24, idx, size, data, TxMessage)
+
+/* Defines for  struct adslATUCSubcarrierInfo */
+#define         FAREND_HLINSC  0x1
+
+/* As per the feedback from Knut on 21/08/2006, the cmv command of HLINSC should be INFO 70 2 */
+#define  FAREND_HLINSC_MAKECMV(mode)           makeCMV(mode, INFO, 70, 2, 1, data, TxMessage)
+#define         FAREND_HLINPS  0x2
+#define  FAREND_HLINPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 72, idx, size, data, TxMessage)
+#define         FAREND_HLOGMT  0x4
+#define  FAREND_HLOGMT_MAKECMV(mode)           makeCMV(mode, INFO, 79, 0, 1, data, TxMessage)
+#define  FAREND_HLOGPS 0x8
+#define  FAREND_HLOGPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 74, idx, size, data, TxMessage)
+#define  FAREND_QLNMT  0x10
+#define  FAREND_QLNMT_MAKECMV(mode)            makeCMV(mode, INFO, 79, 1, 1, data, TxMessage)
+#define         FAREND_QLNPS   0x20
+#define  FAREND_QLNPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 76, idx, size, data, TxMessage)
+#define         FAREND_SNRMT   0x40
+#define  FAREND_SNRMT_MAKECMV(mode)            makeCMV(mode, INFO, 79, 2, 1, data, TxMessage)
+#define         FAREND_SNRPS   0x80
+#define  FAREND_SNRPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 11, idx, size, data, TxMessage)
+#define  FAREND_SNRPS_DIAG_MAKECMV(mode,idx,size)      makeCMV(mode, INFO, 10, idx, size, data, TxMessage)
+#define         FAREND_BITPS   0x100
+#define  FAREND_BITPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 23, idx, size, data, TxMessage)
+#define         FAREND_GAINPS  0x200
+#define  FAREND_GAINPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 25, idx, size, data, TxMessage)
+
+
+// GET_ADSL_POWER_SPECTRAL_DENSITY
+#define NOMPSD_US_MAKECMV      makeCMV(H2D_CMV_READ, INFO, 102, 0, 1, data, TxMessage)
+#define NOMPSD_DS_MAKECMV      makeCMV(H2D_CMV_READ, INFO, 102, 1, 1, data, TxMessage)
+#define PCB_US_MAKECMV         makeCMV(H2D_CMV_READ, INFO, 102, 6, 1, data, TxMessage)
+#define PCB_DS_MAKECMV         makeCMV(H2D_CMV_READ, INFO, 102, 7, 1, data, TxMessage)
+#define        RMSGI_US_MAKECMV        makeCMV(H2D_CMV_READ, INFO, 102, 10, 1, data, TxMessage)
+#define        RMSGI_DS_MAKECMV        makeCMV(H2D_CMV_READ, INFO, 102, 11, 1, data, TxMessage)
+
+/////////////////////////////////////////////////Macro Definitions ? FLAG Setting & Testing
+
+#define SET_FLAG(flags, flag_val)   ((*flags) = ((*flags) | flag_val))
+//     -- This macro sets the flags with the flag_val. Here flags is passed as a pointer
+
+#define IS_FLAG_SET(flags, test_flag)  (((*flags) & (test_flag)) == (test_flag)? test_flag:0)
+//     -- This macro verifies whether test_flag has been set in flags. Here flags is passed as a pointer
+
+
+#define CLR_FLAG(flags, flag_bit)      ((*flags) = (*flags) & (~flag_bit))
+//     -- This macro resets the specified flag_bit in the flags. Here flags is passed as a pointer
+
+
+////////////////////////////////////////////////DATA STRUCTURES ORGANIZATION
+       
+//Here are the data structures used for accessing mib parameters. The ioctl call includes the third parameter as a void pointer. This parameter has to be type-casted in the driver code to the corresponding structure depending upon the command type. For Ex: consider the ioctl used to get the adslLineCode type, ioctl(fd,GET_ADSL_LINE_CODE,void *struct_adslLineTableEntry). In the driver code we check on the type of the command, i.e GET_ADSL_LINE_CODE and type-cast the void pointer to struct adslLineTableEntry type.
+       //
+#define u32 unsigned int
+#define u16 unsigned short
+#define s16 short
+#define u8 unsigned char
+
+
+typedef u32 AdslPerfTimeElapsed;
+typedef u32 AdslPerfPrevDayCount;
+typedef u32 PerfCurrentCount;
+typedef u32 PerfIntervalCount;
+typedef u32 AdslPerfCurrDayCount;
+
+
+//ioctl(int fd, GET_ADSL_LINE_CODE, void *struct_adslLineTableEntry)
+
+typedef struct adslLineTableEntry {
+       int ifIndex;
+       int adslLineCode;
+       u8 flags;
+} adslLineTableEntry;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct adslLineExtTableEntry {
+       int ifIndex;
+       u16 adslLineTransAtucCap;
+       u16 adslLineTransAtucConfig;
+       u16 adslLineTransAtucActual;
+       int adslLineGlitePowerState;
+       u32 flags;
+}adslLineExtTableEntry;
+#endif
+//ioctl(int fd, GET_ADSL_ATUC_PHY, void  *struct_adslAtucPhysEntry)
+#ifndef u_char 
+#define u_char u8
+#endif
+
+typedef struct adslVendorId {
+       u16     country_code;
+       u_char  provider_id[4];  /* Ascii characters */
+       u_char  revision_info[2];
+}adslVendorId;
+
+typedef struct adslAtucPhysEntry {
+       int ifIndex;
+       char serial_no[32];
+       union {
+       char vendor_id[16];
+               adslVendorId vendor_info;
+       } vendor_id;
+       char version_no[16];
+       u32 status;
+       int outputPwr;
+       u32 attainableRate;
+       u8 flags;
+} adslAtucPhysEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_PHY, void  *struct_adslAturPhysEntry)
+
+typedef struct adslAturPhysEntry {
+       int ifIndex;
+       char serial_no[32];
+       union {
+       char vendor_id[16];
+               adslVendorId vendor_info;
+       } vendor_id;
+       char version_no[16];
+       int SnrMgn;
+       u32 Attn;
+       u32 status;
+       int outputPwr;
+       u32 attainableRate;
+       u8 flags;
+} adslAturPhysEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUC_CHAN_INFO, void *struct_adslAtucChanInfo)
+
+typedef struct adslAtucChanInfo {
+       int ifIndex;
+       u32 interleaveDelay;
+       u32 currTxRate;
+       u32 prevTxRate;
+       u8 flags;
+} adslAtucChanInfo;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_CHAN_INFO, void *struct_adslAturChanInfo)
+
+typedef struct adslAturChanInfo {
+       int ifIndex;
+       u32 interleaveDelay;
+       u32 currTxRate;
+       u32 prevTxRate;
+       u32 crcBlkLen;
+       u8 flags;
+} adslAturChanInfo;
+
+
+//ioctl(int fd, GET_ADSL_ATUC_PERF_DATA,  void *struct_atucPerfDataEntry)
+
+typedef struct atucPerfDataEntry
+{
+   int                 ifIndex;
+   u32                         adslAtucPerfLofs;             
+   u32                         adslAtucPerfLoss;             
+   u32                         adslAtucPerfESs;                 
+   u32                         adslAtucPerfInits;
+   int                         adslAtucPerfValidIntervals;
+   int                         adslAtucPerfInvalidIntervals;
+   AdslPerfTimeElapsed         adslAtucPerfCurr15MinTimeElapsed;
+   PerfCurrentCount    adslAtucPerfCurr15MinLofs;
+   PerfCurrentCount    adslAtucPerfCurr15MinLoss;
+   PerfCurrentCount    adslAtucPerfCurr15MinESs;
+   PerfCurrentCount    adslAtucPerfCurr15MinInits;
+   AdslPerfTimeElapsed         adslAtucPerfCurr1DayTimeElapsed;
+   AdslPerfCurrDayCount adslAtucPerfCurr1DayLofs;
+   AdslPerfCurrDayCount adslAtucPerfCurr1DayLoss;
+   AdslPerfCurrDayCount adslAtucPerfCurr1DayESs;
+   AdslPerfCurrDayCount adslAtucPerfCurr1DayInits;
+   int                         adslAtucPerfPrev1DayMoniSecs;
+   AdslPerfPrevDayCount adslAtucPerfPrev1DayLofs;
+   AdslPerfPrevDayCount adslAtucPerfPrev1DayLoss;
+   AdslPerfPrevDayCount adslAtucPerfPrev1DayESs;
+   AdslPerfPrevDayCount adslAtucPerfPrev1DayInits;
+   u32                 flags;
+} atucPerfDataEntry;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct atucPerfDataExtEntry
+ {
+  int ifIndex;
+  u32 adslAtucPerfStatFastR;
+  u32 adslAtucPerfStatFailedFastR;
+  u32 adslAtucPerfStatSesL;
+  u32 adslAtucPerfStatUasL;
+  u32 adslAtucPerfCurr15MinFastR;
+  u32 adslAtucPerfCurr15MinFailedFastR;
+  u32 adslAtucPerfCurr15MinSesL;
+  u32 adslAtucPerfCurr15MinUasL;
+  u32 adslAtucPerfCurr1DayFastR;
+  u32 adslAtucPerfCurr1DayFailedFastR;
+  u32 adslAtucPerfCurr1DaySesL;
+  u32 adslAtucPerfCurr1DayUasL;
+  u32 adslAtucPerfPrev1DayFastR;
+  u32 adslAtucPerfPrev1DayFailedFastR;
+  u32 adslAtucPerfPrev1DaySesL;
+  u32 adslAtucPerfPrev1DayUasL;
+  u32  flags;
+} atucPerfDataExtEntry; 
+
+#endif
+//ioctl(int fd, GET_ADSL_ATUR_PERF_DATA, void *struct_aturPerfDataEntry)
+
+typedef struct aturPerfDataEntry
+{
+   int                 ifIndex;
+   u32                         adslAturPerfLofs;             
+   u32                         adslAturPerfLoss;             
+   u32                         adslAturPerfLprs;                 
+   u32                         adslAturPerfESs;
+   int                         adslAturPerfValidIntervals;
+   int                         adslAturPerfInvalidIntervals;
+   AdslPerfTimeElapsed         adslAturPerfCurr15MinTimeElapsed;
+   PerfCurrentCount    adslAturPerfCurr15MinLofs;
+   PerfCurrentCount    adslAturPerfCurr15MinLoss;
+   PerfCurrentCount    adslAturPerfCurr15MinLprs;
+   PerfCurrentCount    adslAturPerfCurr15MinESs;
+   AdslPerfTimeElapsed         adslAturPerfCurr1DayTimeElapsed;
+   AdslPerfCurrDayCount adslAturPerfCurr1DayLofs;
+   AdslPerfCurrDayCount adslAturPerfCurr1DayLoss;
+   AdslPerfCurrDayCount adslAturPerfCurr1DayLprs;
+   AdslPerfCurrDayCount adslAturPerfCurr1DayESs;
+   int                         adslAturPerfPrev1DayMoniSecs;
+   AdslPerfPrevDayCount adslAturPerfPrev1DayLofs;
+   AdslPerfPrevDayCount adslAturPerfPrev1DayLoss;
+   AdslPerfPrevDayCount adslAturPerfPrev1DayLprs;
+   AdslPerfPrevDayCount adslAturPerfPrev1DayESs;
+   u32                 flags;
+} aturPerfDataEntry;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct aturPerfDataExtEntry
+ {
+  int ifIndex;
+  u32 adslAturPerfStatSesL;
+  u32 adslAturPerfStatUasL;
+  u32 adslAturPerfCurr15MinSesL;
+  u32 adslAturPerfCurr15MinUasL;
+  u32 adslAturPerfCurr1DaySesL;
+  u32 adslAturPerfCurr1DayUasL;
+  u32 adslAturPerfPrev1DaySesL;
+  u32 adslAturPerfPrev1DayUasL;
+  u32  flags;
+} aturPerfDataExtEntry;
+#endif
+//ioctl(int fd, GET_ADSL_ATUC_INTVL_INFO, void *struct_adslAtucInvtInfo)
+
+typedef struct adslAtucIntvlInfo {
+       int ifIndex;
+        int IntervalNumber;
+       PerfIntervalCount intervalLOF;
+       PerfIntervalCount intervalLOS;
+       PerfIntervalCount intervalES;
+       PerfIntervalCount intervalInits; 
+       int intervalValidData;
+       u8 flags;
+} adslAtucIntvlInfo;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct adslAtucInvtlExtInfo
+ {
+  int ifIndex;
+  int IntervalNumber;
+  u32 adslAtucIntervalFastR;
+  u32 adslAtucIntervalFailedFastR;
+  u32 adslAtucIntervalSesL;
+  u32 adslAtucIntervalUasL;
+  u32  flags;
+} adslAtucInvtlExtInfo;
+#endif
+//ioctl(int fd, GET_ADSL_ATUR_INTVL_INFO, void *struct_adslAturInvtlInfo)
+
+typedef struct adslAturIntvlInfo {
+       int ifIndex;
+        int IntervalNumber;
+       PerfIntervalCount intervalLOF;
+       PerfIntervalCount intervalLOS;
+       PerfIntervalCount intervalLPR;
+       PerfIntervalCount intervalES;
+       int intervalValidData;
+       u8 flags;
+} adslAturIntvlInfo;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct adslAturInvtlExtInfo
+ {
+  int ifIndex;
+  int IntervalNumber;
+  u32 adslAturIntervalSesL;
+  u32 adslAturIntervalUasL;
+  u32  flags;
+} adslAturInvtlExtInfo;
+#endif
+//ioctl(int fd, GET_ADSL_ATUC_CHAN_PERF_DATA,  void *struct_atucChannelPerfDataEntry)
+
+typedef struct atucChannelPerfDataEntry
+{
+   int                 ifIndex;
+   u32                         adslAtucChanReceivedBlks;             
+   u32                         adslAtucChanTransmittedBlks;             
+   u32                         adslAtucChanCorrectedBlks;                 
+   u32                         adslAtucChanUncorrectBlks;
+   int                         adslAtucChanPerfValidIntervals;
+   int                         adslAtucChanPerfInvalidIntervals;
+   AdslPerfTimeElapsed         adslAtucChanPerfCurr15MinTimeElapsed;
+   PerfCurrentCount    adslAtucChanPerfCurr15MinReceivedBlks;
+   PerfCurrentCount    adslAtucChanPerfCurr15MinTransmittedBlks;
+   PerfCurrentCount    adslAtucChanPerfCurr15MinCorrectedBlks;
+   PerfCurrentCount    adslAtucChanPerfCurr15MinUncorrectBlks;
+   AdslPerfTimeElapsed  adslAtucChanPerfCurr1DayTimeElapsed;
+   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayReceivedBlks;
+   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayTransmittedBlks;
+   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayCorrectedBlks;
+   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayUncorrectBlks;
+   int                  adslAtucChanPerfPrev1DayMoniSecs;
+   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayReceivedBlks;
+   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayTransmittedBlks;
+   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayCorrectedBlks;
+   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayUncorrectBlks;
+   u32                 flags;
+}atucChannelPerfDataEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_CHAN_PERF_DATA,  void *struct_aturChannelPerfDataEntry)
+
+typedef struct aturChannelPerfDataEntry
+{
+   int                 ifIndex;
+   u32                         adslAturChanReceivedBlks;             
+   u32                         adslAturChanTransmittedBlks;             
+   u32                         adslAturChanCorrectedBlks;                 
+   u32                         adslAturChanUncorrectBlks;
+   int                         adslAturChanPerfValidIntervals;
+   int                         adslAturChanPerfInvalidIntervals;
+   AdslPerfTimeElapsed         adslAturChanPerfCurr15MinTimeElapsed;
+   PerfCurrentCount    adslAturChanPerfCurr15MinReceivedBlks;
+   PerfCurrentCount    adslAturChanPerfCurr15MinTransmittedBlks;
+   PerfCurrentCount    adslAturChanPerfCurr15MinCorrectedBlks;
+   PerfCurrentCount    adslAturChanPerfCurr15MinUncorrectBlks;
+   AdslPerfTimeElapsed  adslAturChanPerfCurr1DayTimeElapsed;
+   AdslPerfCurrDayCount adslAturChanPerfCurr1DayReceivedBlks;
+   AdslPerfCurrDayCount adslAturChanPerfCurr1DayTransmittedBlks;
+   AdslPerfCurrDayCount adslAturChanPerfCurr1DayCorrectedBlks;
+   AdslPerfCurrDayCount adslAturChanPerfCurr1DayUncorrectBlks;
+   int                  adslAturChanPerfPrev1DayMoniSecs;
+   AdslPerfPrevDayCount adslAturChanPerfPrev1DayReceivedBlks;
+   AdslPerfPrevDayCount adslAturChanPerfPrev1DayTransmittedBlks;
+   AdslPerfPrevDayCount adslAturChanPerfPrev1DayCorrectedBlks;
+   AdslPerfPrevDayCount adslAturChanPerfPrev1DayUncorrectBlks;
+   u32                 flags;
+} aturChannelPerfDataEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUC_CHAN_INTVL_INFO, void *struct_adslAtucChanIntvlInfo)
+
+typedef struct adslAtucChanIntvlInfo {
+       int ifIndex;
+        int IntervalNumber;
+       PerfIntervalCount chanIntervalRecvdBlks;
+       PerfIntervalCount chanIntervalXmitBlks;
+       PerfIntervalCount chanIntervalCorrectedBlks;
+       PerfIntervalCount chanIntervalUncorrectBlks;
+       int intervalValidData;
+       u8 flags;
+} adslAtucChanIntvlInfo;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_CHAN_INTVL_INFO, void *struct_adslAturChanIntvlInfo)
+
+typedef struct adslAturChanIntvlInfo {
+       int ifIndex;
+        int IntervalNumber;
+       PerfIntervalCount chanIntervalRecvdBlks;
+       PerfIntervalCount chanIntervalXmitBlks;
+       PerfIntervalCount chanIntervalCorrectedBlks;
+       PerfIntervalCount chanIntervalUncorrectBlks;
+       int intervalValidData;
+       u8 flags;
+} adslAturChanIntvlInfo;
+
+
+//ioctl(int fd, GET_ADSL_ALRM_CONF_PROF,  void *struct_adslLineAlarmConfProfileEntry)
+//ioctl(int fd, SET_ADSL_ALRM_CONF_PROF,  void *struct_adslLineAlarmConfProfileEntry)
+
+typedef struct  adslLineAlarmConfProfileEntry
+ {
+  unsigned char adslLineAlarmConfProfileName[32];
+    int        adslAtucThresh15MinLofs;
+    int        adslAtucThresh15MinLoss;
+    int        adslAtucThresh15MinESs;
+    u32        adslAtucThreshFastRateUp;
+    u32        adslAtucThreshInterleaveRateUp;
+    u32        adslAtucThreshFastRateDown;
+    u32        adslAtucThreshInterleaveRateDown;
+    int        adslAtucInitFailureTrapEnable;
+    int        adslAturThresh15MinLofs;
+    int        adslAturThresh15MinLoss;
+    int        adslAturThresh15MinLprs;
+    int        adslAturThresh15MinESs;
+    u32        adslAturThreshFastRateUp;
+    u32        adslAturThreshInterleaveRateUp;
+    u32        adslAturThreshFastRateDown;
+    u32        adslAturThreshInterleaveRateDown;
+    int        adslLineAlarmConfProfileRowStatus;
+    u32        flags;
+} adslLineAlarmConfProfileEntry;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct adslLineAlarmConfProfileExtEntry
+ {
+  u8  adslLineAlarmConfProfileExtName[32];
+  u32 adslAtucThreshold15MinFailedFastR;
+  u32 adslAtucThreshold15MinSesL;
+  u32 adslAtucThreshold15MinUasL;
+  u32 adslAturThreshold15MinSesL;
+  u32 adslAturThreshold15MinUasL;
+  u32  flags;
+} adslLineAlarmConfProfileExtEntry;
+#endif
+//TRAPS
+
+/* The following Data Sturctures are added to support the WEB related parameters for ADSL Statistics */
+typedef struct  adslLineStatus
+ {
+    int        adslModemStatus;
+    u32        adslModeSelected;
+    int        adslAtucThresh15MinESs;
+    int        adslTrellisCodeEnable;
+    int        adslLatency;
+    u8 flags;
+ } adslLineStatusInfo;
+
+typedef struct  adslLineRate
+ {
+    u32        adslDataRateds;
+    u32        adslDataRateus;
+    u32        adslATTNDRds;   
+    u32        adslATTNDRus;   
+    u8         flags;
+ } adslLineRateInfo;
+
+typedef struct  adslLineInfo
+ {
+    u32        adslInterleaveDepthds;
+    u32        adslInterleaveDepthus;
+    u32        adslLATNds;
+    u32        adslLATNus;
+    u32        adslSATNds;
+    u32        adslSATNus;
+    int                adslSNRMds;
+    int                adslSNRMus;
+    int                adslACATPds;
+    int                adslACATPus;
+    u32        flags;
+ } adslLineInfo;
+
+typedef struct  adslNearEndPerfStats
+ {
+    u32        adslSuperFrames; 
+    u32        adslneLOS;
+    u32        adslneLOF;
+    u32        adslneLPR;
+    u32        adslneNCD;
+    u32        adslneLCD;
+    u32        adslneCRC;
+    u32                adslneRSCorr;
+    u32                adslneFECS;
+    u32                adslneES;
+    u32                adslneSES;
+    u32                adslneLOSS;
+    u32                adslneUAS;
+    u32                adslneHECErrors;
+    u32                flags;
+ } adslNearEndPerfStats;
+
+typedef struct  adslFarEndPerfStats
+ {
+    u32        adslfeLOS;
+    u32        adslfeLOF;
+    u32        adslfeLPR;
+    u32        adslfeNCD;
+    u32        adslfeLCD;
+    u32        adslfeCRC;
+    u32                adslfeRSCorr;
+    u32                adslfeFECS;
+    u32                adslfeES;
+    u32                adslfeSES;
+    u32                adslfeLOSS;
+    u32                adslfeUAS;
+    u32                adslfeHECErrors;
+    u32                flags;
+ } adslFarEndPerfStats;
+
+/* The number of tones (and hence indexes) is dependent on the ADSL mode - G.992.1, G.992.2, G.992.3, * G.992.4 and G.992.5 */
+typedef struct adslATURSubcarrierInfo {
+       int     ifindex;
+       u16     HLINSCds;
+       u16     HLINpsds[1024];/* Even index = real part; Odd Index
+                                   = imaginary part for each tone */
+       u16     HLOGMTds;
+       u16     HLOGpsds[512];
+       u16     QLNMTds;
+       u16     QLNpsds[512];
+       u16     SNRMTds;
+       u16     SNRpsds[512];  
+       u16     BITpsds[512];
+       s16     GAINpsds[512]; /* Signed value in 0.1dB units. i.e dB * 10.
+                               Needs to be converted into linear scale*/
+       u16     flags;
+}adslATURSubcarrierInfo;
+
+typedef struct adslATUCSubcarrierInfo {
+       int     ifindex;
+       u16     HLINSCus;
+       u16     HLINpsus[128];/* Even index = real part; Odd Index
+                                   = imaginary part for each tone */
+       u16     HLOGMTus;
+       u16     HLOGpsus[64];
+       u16     QLNMTus;
+       u16     QLNpsus[64]; 
+       u16     SNRMTus;
+       u16     SNRpsus[64];  
+       u16     BITpsus[64];
+       s16     GAINpsus[64]; /* Signed value in 0.1dB units. i.e dB * 10.
+                               Needs to be converted into linear scale*/
+       u16     flags;
+}adslATUCSubcarrierInfo;
+
+#ifndef u_int16
+#define u_int16 u16
+#endif
+
+typedef struct adslInitStats {
+       u_int16 FullInitializationCount;
+       u_int16 FailedFullInitializationCount;
+       u_int16 LINIT_Errors;
+       u_int16 Init_Timeouts;
+}adslInitStats;
+
+typedef struct adslPowerSpectralDensity {
+       int     ACTPSDds;
+       int     ACTPSDus;
+}adslPowerSpectralDensity;
+
+//ioctl(int fd, ADSL_ATUR_TRAPS, void  *uint16_flags)
+typedef union structpts {
+       adslLineTableEntry * adslLineTableEntry_pt;
+       adslAtucPhysEntry * adslAtucPhysEntry_pt;
+       adslAturPhysEntry * adslAturPhysEntry_pt;
+       adslAtucChanInfo * adslAtucChanInfo_pt;
+       adslAturChanInfo * adslAturChanInfo_pt;
+       atucPerfDataEntry * atucPerfDataEntry_pt;
+       aturPerfDataEntry * aturPerfDataEntry_pt;
+       adslAtucIntvlInfo * adslAtucIntvlInfo_pt;
+       adslAturIntvlInfo * adslAturIntvlInfo_pt;
+       atucChannelPerfDataEntry * atucChannelPerfDataEntry_pt;
+       aturChannelPerfDataEntry * aturChannelPerfDataEntry_pt;
+       adslAtucChanIntvlInfo * adslAtucChanIntvlInfo_pt;
+       adslAturChanIntvlInfo * adslAturChanIntvlInfo_pt;
+       adslLineAlarmConfProfileEntry * adslLineAlarmConfProfileEntry_pt;
+       // RFC 3440
+       
+    #ifdef IFXMIPS_MEI_MIB_RFC3440
+       adslLineExtTableEntry * adslLineExtTableEntry_pt;
+       atucPerfDataExtEntry * atucPerfDataExtEntry_pt;
+       adslAtucInvtlExtInfo * adslAtucInvtlExtInfo_pt;
+       aturPerfDataExtEntry * aturPerfDataExtEntry_pt;
+       adslAturInvtlExtInfo * adslAturInvtlExtInfo_pt;
+       adslLineAlarmConfProfileExtEntry * adslLineAlarmConfProfileExtEntry_pt;
+    #endif 
+       adslLineStatusInfo      * adslLineStatusInfo_pt;
+       adslLineRateInfo        * adslLineRateInfo_pt;
+       adslLineInfo            * adslLineInfo_pt;
+       adslNearEndPerfStats    * adslNearEndPerfStats_pt;
+       adslFarEndPerfStats     * adslFarEndPerfStats_pt;
+       adslATUCSubcarrierInfo  * adslATUCSubcarrierInfo_pt;
+       adslATURSubcarrierInfo  * adslATURSubcarrierInfo_pt;
+       adslPowerSpectralDensity * adslPowerSpectralDensity_pt;
+}structpts;
+
+#endif /* ] __IFXMIPS_MEI_APP_IOCTL_H */
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_bsp.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_bsp.h
new file mode 100644 (file)
index 0000000..c346620
--- /dev/null
@@ -0,0 +1,308 @@
+/******************************************************************************
+**
+** FILE NAME    : ifxmips_mei_bsp.h
+** PROJECT      : Danube
+** MODULES      : MEI
+**
+** DATE         : 1 Jan 2006
+** AUTHOR       : TC Chen
+** DESCRIPTION  : MEI Driver
+** COPYRIGHT    :       Copyright (c) 2006
+**                      Infineon Technologies AG
+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+**    This program is free software; you can redistribute it and/or modify
+**    it under the terms of the GNU General Public License as published by
+**    the Free Software Foundation; either version 2 of the License, or
+**    (at your option) any later version.
+**
+** HISTORY
+** $Version $Date      $Author     $Comment
+*******************************************************************************/
+#ifndef _IFXMIPS_MEI_BSP_H_
+#define _IFXMIPS_MEI_BSP_H_
+
+/***   Register address offsets, relative to MEI_SPACE_ADDRESS ***/
+#define MEI_DATA_XFR_OFFSET                            (0x0000)
+#define        MEI_VERSION_OFFSET                              (0x0004)
+#define        MEI_ARC_GP_STAT_OFFSET                          (0x0008)
+#define MEI_DATA_XFR_STAT_OFFSET                       (0x000C)
+#define        MEI_XFR_ADDR_OFFSET                             (0x0010)
+#define MEI_MAX_WAIT_OFFSET                            (0x0014)
+#define        MEI_TO_ARC_INT_OFFSET                           (0x0018)
+#define        ARC_TO_MEI_INT_OFFSET                           (0x001C)
+#define        ARC_TO_MEI_INT_MASK_OFFSET                      (0x0020)
+#define        MEI_DEBUG_WAD_OFFSET                            (0x0024)
+#define MEI_DEBUG_RAD_OFFSET                           (0x0028)
+#define        MEI_DEBUG_DATA_OFFSET                           (0x002C)
+#define        MEI_DEBUG_DEC_OFFSET                            (0x0030)
+#define MEI_CONFIG_OFFSET                              (0x0034)
+#define        MEI_RST_CONTROL_OFFSET                          (0x0038)
+#define        MEI_DBG_MASTER_OFFSET                           (0x003C)
+#define        MEI_CLK_CONTROL_OFFSET                          (0x0040)
+#define        MEI_BIST_CONTROL_OFFSET                         (0x0044)
+#define        MEI_BIST_STAT_OFFSET                            (0x0048)
+#define MEI_XDATA_BASE_SH_OFFSET                       (0x004c)
+#define MEI_XDATA_BASE_OFFSET                          (0x0050)
+#define MEI_XMEM_BAR_BASE_OFFSET                       (0x0054)
+#define MEI_XMEM_BAR0_OFFSET                           (0x0054)
+#define MEI_XMEM_BAR1_OFFSET                           (0x0058)
+#define MEI_XMEM_BAR2_OFFSET                           (0x005C)
+#define MEI_XMEM_BAR3_OFFSET                           (0x0060)
+#define MEI_XMEM_BAR4_OFFSET                           (0x0064)
+#define MEI_XMEM_BAR5_OFFSET                           (0x0068)
+#define MEI_XMEM_BAR6_OFFSET                           (0x006C))
+#define MEI_XMEM_BAR7_OFFSET                           (0x0070)
+#define MEI_XMEM_BAR8_OFFSET                           (0x0074)
+#define MEI_XMEM_BAR9_OFFSET                           (0x0078)
+#define MEI_XMEM_BAR10_OFFSET                          (0x007C)
+#define MEI_XMEM_BAR11_OFFSET                          (0x0080)
+#define MEI_XMEM_BAR12_OFFSET                          (0x0084)
+#define MEI_XMEM_BAR13_OFFSET                          (0x0088)
+#define MEI_XMEM_BAR14_OFFSET                          (0x008C)
+#define MEI_XMEM_BAR15_OFFSET                          (0x0090)
+#define MEI_XMEM_BAR16_OFFSET                          (0x0094)
+
+#define WHILE_DELAY 20000
+/*
+**     Define where in ME Processor's memory map the Stratify chip lives
+*/
+
+#define MAXSWAPSIZE            8 * 1024        //8k *(32bits)
+
+//      Mailboxes
+#define MSG_LENGTH             16      // x16 bits
+#define YES_REPLY                      1
+#define NO_REPLY               0
+
+#define CMV_TIMEOUT            1000    //jiffies
+
+//  Block size per BAR
+#define SDRAM_SEGMENT_SIZE     (64*1024)
+// Number of Bar registers
+#define MAX_BAR_REGISTERS      (17)
+
+#define XDATA_REGISTER         (15)
+
+#define IFXMIPS_MEI_IOCTL_CMV_WINHOST          IFX_ADSL_IOC_CMV_WINHOST
+
+#define IFXMIPS_MEI_IOCTL_CMV_READ             IFX_ADSL_IOC_CMV_READ
+#define IFXMIPS_MEI_IOCTL_CMV_WRITE            IFX_ADSL_IOC_CMV_WRITE
+
+#define IFXMIPS_MEI_IOCTL_GET_BASE_ADDRESS     IFX_ADSL_IOC_GET_BASE_ADDRESS
+
+// ARC register addresss
+#define ARC_STATUS                             0x0
+#define ARC_LP_START                           0x2
+#define ARC_LP_END                             0x3
+#define ARC_DEBUG                              0x5
+#define ARC_INT_MASK                           0x10A
+
+#define IRAM0_BASE                             (0x00000)
+#define IRAM1_BASE                             (0x04000)
+#define BRAM_BASE                              (0x0A000)
+
+#define ADSL_BASE                              (0x20000)
+#define CRI_BASE                               (ADSL_BASE + 0x11F00)
+#define CRI_CCR0                               (CRI_BASE + 0x00)
+#define CRI_RST                                        (CRI_BASE + 0x04*4)
+#define ADSL_DILV_BASE                                 (ADSL_BASE+0x20000)
+
+//
+#define IRAM0_ADDR_BIT_MASK   0xFFF
+#define IRAM1_ADDR_BIT_MASK   0xFFF
+#define BRAM_ADDR_BIT_MASK    0xFFF
+#define RX_DILV_ADDR_BIT_MASK 0x1FFF
+
+/***  Bit definitions ***/
+
+#define FALSE  0
+#define TRUE   1
+#define BIT0   1<<0
+#define BIT1   1<<1
+#define BIT2   1<<2
+#define BIT3   1<<3
+#define BIT4   1<<4
+#define BIT5   1<<5
+#define BIT6   1<<6
+#define BIT7   1<<7
+#define BIT8   1<<8
+#define BIT9   1<<9
+#define BIT10  1<<10
+#define BIT11  1<<11
+#define BIT12  1<<12
+#define BIT13  1<<13
+#define BIT14  1<<14
+#define BIT15  1<<15
+#define BIT16  1<<16
+#define BIT17  1<<17
+#define BIT18  1<<18
+#define BIT19  1<<19
+#define BIT20  1<<20
+#define BIT21  1<<21
+#define BIT22  1<<22
+#define BIT23  1<<23
+#define BIT24  1<<24
+#define BIT25  1<<25
+#define BIT26  1<<26
+#define BIT27  1<<27
+#define BIT28  1<<28
+#define BIT29  1<<29
+#define BIT30  1<<30
+#define BIT31  1<<31
+
+// CRI_CCR0 Register definitions
+#define CLK_2M_MODE_ENABLE                     BIT6
+#define        ACL_CLK_MODE_ENABLE                     BIT4
+#define FDF_CLK_MODE_ENABLE                    BIT2
+#define STM_CLK_MODE_ENABLE                    BIT0
+
+// CRI_RST Register definitions
+#define FDF_SRST                               BIT3
+#define MTE_SRST                               BIT2
+#define FCI_SRST                               BIT1
+#define AAI_SRST                               BIT0
+
+//      MEI_TO_ARC_INTERRUPT Register definitions
+#define        MEI_TO_ARC_INT1                 BIT3
+#define        MEI_TO_ARC_INT0                 BIT2
+#define MEI_TO_ARC_CS_DONE             BIT1    //need to check
+#define        MEI_TO_ARC_MSGAV                BIT0
+
+//      ARC_TO_MEI_INTERRUPT Register definitions
+#define        ARC_TO_MEI_INT1                 BIT8
+#define        ARC_TO_MEI_INT0                 BIT7
+#define        ARC_TO_MEI_CS_REQ               BIT6
+#define        ARC_TO_MEI_DBG_DONE             BIT5
+#define        ARC_TO_MEI_MSGACK               BIT4
+#define        ARC_TO_MEI_NO_ACCESS            BIT3
+#define        ARC_TO_MEI_CHECK_AAITX          BIT2
+#define        ARC_TO_MEI_CHECK_AAIRX          BIT1
+#define        ARC_TO_MEI_MSGAV                BIT0
+
+//      ARC_TO_MEI_INTERRUPT_MASK Register definitions
+#define        GP_INT1_EN                      BIT8
+#define        GP_INT0_EN                      BIT7
+#define        CS_REQ_EN                       BIT6
+#define        DBG_DONE_EN                     BIT5
+#define        MSGACK_EN                       BIT4
+#define        NO_ACC_EN                       BIT3
+#define        AAITX_EN                        BIT2
+#define        AAIRX_EN                        BIT1
+#define        MSGAV_EN                        BIT0
+
+#define        MEI_SOFT_RESET                  BIT0
+
+#define        HOST_MSTR                       BIT0
+
+#define JTAG_MASTER_MODE               0x0
+#define MEI_MASTER_MODE                        HOST_MSTR
+
+//      MEI_DEBUG_DECODE Register definitions
+#define MEI_DEBUG_DEC_MASK             (0x3)
+#define MEI_DEBUG_DEC_AUX_MASK         (0x0)
+#define MEI_DEBUG_DEC_DMP1_MASK                (0x1)
+#define MEI_DEBUG_DEC_DMP2_MASK                (0x2)
+#define MEI_DEBUG_DEC_CORE_MASK         (0x3)
+
+#define AUX_STATUS                     (0x0)
+//      ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
+//      page swap requests.
+#define MEI_TO_ARC_MAILBOX             (0xDFD0)
+#define MEI_TO_ARC_MAILBOXR            (MEI_TO_ARC_MAILBOX + 0x2C)
+
+#define        ARC_TO_MEI_MAILBOX              (0xDFA0)
+#define ARC_MEI_MAILBOXR               (ARC_TO_MEI_MAILBOX + 0x2C)
+
+// Codeswap request messages are indicated by setting BIT31
+#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK     (0x80000000)
+
+// Clear Eoc messages received are indicated by setting BIT17 
+#define OMB_CLEAREOC_INTERRUPT_CODE    (0x00020000)
+
+/*
+**     Swap page header
+*/
+//      Page must be loaded at boot time if size field has BIT31 set
+#define BOOT_FLAG      (BIT31)
+#define BOOT_FLAG_MASK ~BOOT_FLAG
+
+#define FREE_RELOAD            1
+#define FREE_SHOWTIME          2
+#define FREE_ALL               3
+
+// marcos
+#define        IFXMIPS_WRITE_REGISTER_L(data,addr)     do{ *((volatile u32*)(addr)) = (u32)(data);} while (0)
+#define IFXMIPS_READ_REGISTER_L(addr)  (*((volatile u32*)(addr)))
+#define SET_BIT(reg, mask)                  reg |= (mask)
+#define CLEAR_BIT(reg, mask)                reg &= (~mask)
+#define CLEAR_BITS(reg, mask)               CLEAR_BIT(reg, mask)
+#define SET_BITS(reg, mask)                 SET_BIT(reg, mask)
+#define SET_BITFIELD(reg, mask, off, val)   {reg &= (~mask); reg |= (val << off);}
+
+#define ALIGN_SIZE                         ( 1L<<10 )  //1K size align
+#define MEM_ALIGN(addr)                    (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) )
+
+// swap marco
+#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);}
+#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);}
+
+//      Swap page header describes size in 32-bit words, load location, and image offset
+//      for program and/or data segments
+typedef struct _arc_swp_page_hdr {
+       u32 p_offset;           //Offset bytes of progseg from beginning of image
+       u32 p_dest;             //Destination addr of progseg on processor
+       u32 p_size;             //Size in 32-bitwords of program segment
+       u32 d_offset;           //Offset bytes of dataseg from beginning of image
+       u32 d_dest;             //Destination addr of dataseg on processor
+       u32 d_size;             //Size in 32-bitwords of data segment
+} ARC_SWP_PAGE_HDR;
+
+/*
+**     Swap image header
+*/
+#define GET_PROG       0       //      Flag used for program mem segment
+#define GET_DATA       1       //      Flag used for data mem segment
+
+//      Image header contains size of image, checksum for image, and count of
+//      page headers. Following that are 'count' page headers followed by
+//      the code and/or data segments to be loaded
+typedef struct _arc_img_hdr {
+       u32 size;               //      Size of binary image in bytes
+       u32 checksum;           //      Checksum for image
+       u32 count;              //      Count of swp pages in image
+       ARC_SWP_PAGE_HDR page[1];       //      Should be "count" pages - '1' to make compiler happy
+} ARC_IMG_HDR;
+
+typedef struct smmu_mem_info {
+       int type;
+       unsigned long nCopy;
+       unsigned long size;
+       unsigned char *address;
+       unsigned char *org_address;
+} smmu_mem_info_t;
+
+typedef struct ifxmips_mei_device_private {
+       int modem_ready;
+       int arcmsgav;
+       int cmv_reply;
+       int cmv_waiting;
+       // Mei to ARC CMV count, reply count, ARC Indicator count       
+       int indicator_count;
+       int cmv_count;
+       int reply_count;
+       unsigned long image_size;
+       int nBar;
+       u16 Recent_indicator[MSG_LENGTH];
+
+       u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4)));
+
+       smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS];
+       ARC_IMG_HDR *img_hdr;
+       //  to wait for arc cmv reply, sleep on wait_queue_arcmsgav;
+       wait_queue_head_t wait_queue_arcmsgav;
+       wait_queue_head_t wait_queue_modemready;
+       MEI_mutex_t mei_cmv_sema;
+} ifxmips_mei_device_private_t;
+
+#endif //_IFXMIPS_MEI_BSP_H_
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_ioctl.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_ioctl.h
new file mode 100644 (file)
index 0000000..d11f04e
--- /dev/null
@@ -0,0 +1,734 @@
+/******************************************************************************
+**
+** FILE NAME    : ifxmips_mei_ioctl.h
+** PROJECT      : Danube
+** MODULES      : MEI
+**
+** DATE         : 1 Jan 2006
+** AUTHOR       : TC Chen
+** DESCRIPTION  : MEI Driver
+** COPYRIGHT    :       Copyright (c) 2006
+**                      Infineon Technologies AG
+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+**    This program is free software; you can redistribute it and/or modify
+**    it under the terms of the GNU General Public License as published by
+**    the Free Software Foundation; either version 2 of the License, or
+**    (at your option) any later version.
+**
+** HISTORY
+** $Version $Date      $Author     $Comment
+*******************************************************************************/
+#ifndef         _IFXMIPS_MEI_IOCTL_H
+#define                _IFXMIPS_MEI_IOCTL_H
+
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+#define PCM_BUFF_SIZE          1024    //bytes
+//  interrupt numbers
+
+#if !(defined(_IFXMIPS_ADSL_APP) || defined (_AMAZON_ADSL_APP))
+
+// Number of intervals
+#define INTERVAL_NUM                                   192     //two days
+typedef struct ifxmips_mei_mib {
+       struct list_head list;
+       struct timeval start_time;      //start of current interval
+
+       int AtucPerfLof;
+       int AtucPerfLos;
+       int AtucPerfEs;
+       int AtucPerfInit;
+
+       int AturPerfLof;
+       int AturPerfLos;
+       int AturPerfLpr;
+       int AturPerfEs;
+
+       int AturChanPerfRxBlk;
+       int AturChanPerfTxBlk;
+       int AturChanPerfCorrBlk;
+       int AturChanPerfUncorrBlk;
+
+       //RFC-3440
+       int AtucPerfStatFastR;
+       int AtucPerfStatFailedFastR;
+       int AtucPerfStatSesL;
+       int AtucPerfStatUasL;
+       int AturPerfStatSesL;
+       int AturPerfStatUasL;
+} ifxmips_mei_mib;
+
+typedef struct adslChanPrevTxRate {
+       u32 adslAtucChanPrevTxRate;
+       u32 adslAturChanPrevTxRate;
+} adslChanPrevTxRate;
+
+typedef struct adslPhysCurrStatus {
+       u32 adslAtucCurrStatus;
+       u32 adslAturCurrStatus;
+} adslPhysCurrStatus;
+
+typedef struct ChanType {
+       int interleave;
+       int fast;
+       int bearchannel0;
+       int bearchannel1;
+} ChanType;
+
+typedef struct mib_previous_read {
+       u16 ATUC_PERF_ESS;
+       u16 ATUR_PERF_ESS;
+       u32 ATUR_CHAN_RECV_BLK;
+       u16 ATUR_CHAN_CORR_BLK_INTL;
+       u16 ATUR_CHAN_CORR_BLK_FAST;
+       u16 ATUR_CHAN_UNCORR_BLK_INTL;
+       u16 ATUR_CHAN_UNCORR_BLK_FAST;
+       u16 ATUC_PERF_STAT_FASTR;
+       u16 ATUC_PERF_STAT_FAILED_FASTR;
+       u16 ATUC_PERF_STAT_SESL;
+       u16 ATUC_PERF_STAT_UASL;
+       u16 ATUR_PERF_STAT_SESL;
+} mib_previous_read;
+
+typedef struct mib_flags_pretime {
+       struct timeval ATUC_PERF_LOSS_PTIME;
+       struct timeval ATUC_PERF_LOFS_PTIME;
+       struct timeval ATUR_PERF_LOSS_PTIME;
+       struct timeval ATUR_PERF_LOFS_PTIME;
+       struct timeval ATUR_PERF_LPR_PTIME;
+} mib_flags_pretime;
+
+               //  cmv message structures
+#define        MP_PAYLOAD_SIZE                                 12
+typedef struct mpmessage {
+       u16 iFunction;
+       u16 iGroup;
+       u16 iAddress;
+       u16 iIndex;
+       u16 iPayload[MP_PAYLOAD_SIZE];
+} MPMessage;
+#endif
+
+typedef struct meireg {
+       u32 iAddress;
+       u32 iData;
+} meireg;
+
+#define MEIDEBUG_BUFFER_SIZES 50
+typedef struct meidebug {
+       u32 iAddress;
+       u32 iCount;
+       u32 buffer[MEIDEBUG_BUFFER_SIZES];
+} meidebug;
+
+//==============================================================================
+// Group definitions                                                              
+//==============================================================================
+#define OPTN                    5
+#define CNFG                    8
+#define CNTL                    1
+#define STAT                    2
+#define RATE                    6
+#define PLAM                    7
+#define INFO                    3
+#define TEST                   4
+//==============================================================================
+// Opcode definitions
+//==============================================================================
+#define H2D_CMV_READ                            0x00
+#define H2D_CMV_WRITE                           0x04
+#define H2D_CMV_INDICATE_REPLY                  0x10
+#define H2D_ERROR_OPCODE_UNKNOWN               0x20
+#define H2D_ERROR_CMV_UNKNOWN                  0x30
+
+#define D2H_CMV_READ_REPLY                             0x01
+#define D2H_CMV_WRITE_REPLY                     0x05
+#define D2H_CMV_INDICATE                        0x11
+#define D2H_ERROR_OPCODE_UNKNOWN                0x21
+#define D2H_ERROR_CMV_UNKNOWN                   0x31
+#define D2H_ERROR_CMV_READ_NOT_AVAILABLE        0x41
+#define D2H_ERROR_CMV_WRITE_ONLY                0x51
+#define D2H_ERROR_CMV_READ_ONLY                 0x61
+
+#define H2D_DEBUG_READ_DM                       0x02
+#define H2D_DEBUG_READ_PM                       0x06
+#define H2D_DEBUG_WRITE_DM                      0x0a
+#define H2D_DEBUG_WRITE_PM                      0x0e
+
+#define D2H_DEBUG_READ_DM_REPLY                0x03
+#define D2H_DEBUG_READ_FM_REPLY                0x07
+#define D2H_DEBUG_WRITE_DM_REPLY               0x0b
+#define D2H_DEBUG_WRITE_FM_REPLY               0x0f
+#define D2H_ERROR_ADDR_UNKNOWN                 0x33
+
+#define D2H_AUTONOMOUS_MODEM_READY_MSG         0xf1
+//==============================================================================
+// INFO register address field definitions
+//==============================================================================
+
+#define INFO_TxState                                   0
+#define INFO_RxState                                   1
+#define INFO_TxNextState                               2
+#define INFO_RxNextState                               3
+#define INFO_TxStateJumpFrom                           4
+#define INFO_RxStateJumpFrom                           5
+
+#define INFO_ReverbSnrBuf                              8
+#define INFO_ReverbEchoSnrBuf                          9
+#define INFO_MedleySnrBuf                              10
+#define INFO_RxShowtimeSnrBuf                          11
+#define INFO_DECdelay                                  12
+#define INFO_DECExponent                               13
+#define INFO_DECTaps                                   14
+#define INFO_AECdelay                                  15
+#define INFO_AECExponent                               16
+#define INFO_AECTaps                                   17
+#define INFO_TDQExponent                               18
+#define INFO_TDQTaps                                   19
+#define INFO_FDQExponent                               20
+#define INFO_FDQTaps                                   21
+#define INFO_USBat                                     22
+#define INFO_DSBat                                     23
+#define INFO_USFineGains                               24
+#define INFO_DSFineGains                               25
+#define INFO_BitloadFirstChannel                       26
+#define INFO_BitloadLastChannel                                27
+#define INFO_PollEOCData                               28      // CO specific
+#define INFO_CSNRMargin                                        29      // CO specific
+#define INFO_RCMsgs1                                   30
+#define INFO_RMsgs1                                    31
+#define INFO_RMsgRA                                    32
+#define INFO_RCMsgRA                                   33
+#define INFO_RMsg2                                     34
+#define INFO_RCMsg2                                    35
+#define INFO_BitLoadOK                                 36
+#define INFO_RCRates1                                  37
+#define INFO_RRates1Tab                                        38
+#define INFO_RMsgs1Tab                                 39
+#define INFO_RMsgRATab                                 40
+#define INFO_RRatesRA                                  41
+#define INFO_RCRatesRA                                 42
+#define INFO_RRates2                                   43
+#define INFO_RCRates2                                  44
+#define INFO_PackedRMsg2                               45
+#define INFO_RxBitSwapFlag                             46
+#define INFO_TxBitSwapFlag                             47
+#define INFO_ShowtimeSNRUpdateCount                    48
+#define INFO_ShowtimeFDQUpdateCount                    49
+#define INFO_ShowtimeDECUpdateCount                    50
+#define INFO_CopyRxBuffer                              51
+#define INFO_RxToneBuf                                 52
+#define INFO_TxToneBuf                                  53
+#define INFO_Version                                   54
+#define INFO_TimeStamp                                  55
+#define INFO_feVendorID                                        56
+#define INFO_feSerialNum                               57
+#define INFO_feVersionNum                              58
+#define INFO_BulkMemory                                        59      //Points to start of bulk memory
+#define INFO_neVendorID                                 60
+#define INFO_neVersionNum                              61
+#define INFO_neSerialNum                               62
+
+//==============================================================================
+// RATE register address field definitions
+//==============================================================================
+
+#define RATE_UsRate                                    0
+#define RATE_DsRate                                    1
+
+//==============================================================================
+// PLAM (Physical Layer Management) register address field definitions
+//      (See G997.1 for reference)
+//==============================================================================
+
+       //                                      ///
+       // Failure Flags        ///
+       //                                      ///
+
+#define PLAM_NearEndFailureFlags               0
+#define PLAM_FarEndFailureFlags                        1
+
+       //                                                                      ///
+       // Near End Failure Flags Bit Definitions       ///
+       //                                                                      ///
+
+// ADSL Failures ///
+#define PLAM_LOS_FailureBit                            0x0001
+#define PLAM_LOF_FailureBit                            0x0002
+#define PLAM_LPR_FailureBit                            0x0004
+#define PLAM_RFI_FailureBit                            0x0008
+
+// ATM Failures ///
+#define PLAM_NCD_LP0_FailureBit                                0x0010
+#define PLAM_NCD_LP1_FailureBit                                0x0020
+#define PLAM_LCD_LP0_FailureBit                                0x0040
+#define PLAM_LCD_LP1_FailureBit                                0x0080
+
+#define PLAM_NCD_BC0_FailureBit                                0x0100
+#define PLAM_NCD_BC1_FailureBit                                0x0200
+#define PLAM_LCD_BC0_FailureBit                                0x0400
+#define PLAM_LCD_BC1_FailureBit                                0x0800
+       //                                              ///
+       // Performance Counts   ///
+       //                                              ///
+
+#define PLAM_NearEndCrcCnt                             2
+#define PLAM_CorrectedRSErrors                         3
+
+#define PLAM_NearEndECSCnt                             6
+#define PLAM_NearEndESCnt                              7
+#define PLAM_NearEndSESCnt                             8
+#define PLAM_NearEndLOSSCnt                            9
+#define PLAM_NearEndUASLCnt                            10
+
+#define PLAM_NearEndHECErrCnt                          11
+
+#define PLAM_NearEndHECTotCnt                          16
+#define PLAM_NearEndCellTotCnt                         18
+#define PLAM_NearEndSfCntLSW                           20
+#define PLAM_NearEndSfCntMSW                           21
+
+#define PLAM_FarEndFebeCnt                             24
+
+#define PLAM_FarEndFecCnt                              28
+
+#define PLAM_FarEndFECSCnt                             32
+#define PLAM_FarEndESCnt                               33
+#define PLAM_FarEndSESCnt                              34
+#define PLAM_FarEndLOSSCnt                             35
+#define PLAM_FarEndUASLCnt                             36
+
+#define PLAM_FarEndHECErrCnt                           37
+
+#define PLAM_FarEndHECTotCnt                           41
+
+#define PLAM_FarEndCellTotCnt                          43
+
+#define PLAM_SNRMargin_0_1db                           45
+
+#define PLAM_SNRMargin                                 46
+
+//==============================================================================
+// CNTL register address and bit field definitions
+//==============================================================================
+
+#define CNTL_ModemControl                              0
+
+#define CNTL_ModemReset                                        0x0
+#define CNTL_ModemStart                                        0x2
+
+//==============================================================================
+// STAT register address and bit field definitions
+//==============================================================================
+
+#define STAT_MacroState                                        0
+#define STAT_Mode                                      1
+#define STAT_DMTFramingMode                            2
+#define STAT_SleepState                                        3
+#define STAT_Misc                                      4
+#define STAT_FailureState                              5
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // STAT_OLRStatus provides status of OLR
+ //16-bit STAT_OLRStatus_DS
+ //  [1:0]      :       OLR status 00=IDLE,  01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
+ //  [3:2]:             Reserved
+ //  [5:4]:             OLR_Type (1:bitswap; 2: DRR; 3: SRA)
+ //  [7:6]:             Reserved
+ //  [10:8]:            >0=Request. 0=not.   For DS, # of request transmissions/retransmissions (3 bits).
+ //  [11]:              1=Receive Response, 0=not
+ //  [15:12]:   Reserved
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ ///
+#define STAT_OLRStatus_DS                              6
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // STAT_OLRStatus provides status of OLR
+ // 16-bit STAT_OLRStatus_US CMV
+ //  [1:0]      :       OLR status 00=IDLE,  01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
+ //  [3:2]:             Reserved
+ //  [5:4]:             OLR_Type (1:bitswap; 2: DRR; 3: SRA)
+ //  [7:6]:             Reserved
+ //  [8]:               1=Request Received. 0=not.
+ //  [10:9]:     Reserved
+ //  [11]:              1=Response Sent, 0=not
+ //  [15:12]:   Reserved
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+///
+#define STAT_OLRStatus_US                              7
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // STAT_PMStatus provides status of PM
+ // 16-bit STAT_PMStatus CMV
+ //  [1:0]      :       PM Status 00=IDLE,  01=PM_IN_PROGRESS, 10=PM_Completed, 11=PM_Aborted
+ //  [2] :              0=ATU_R initiated PM; 1 = ATU_C initiated PM
+ //  [3]:               Reserved
+ //  [5:4]:             PM_Type (1:Simple Request; 2: L2 request; 3: L2 trim)
+ //  [7:6]:             Reserved
+ //  [10:8]:            >0=Request. 0=not.   # of request transmissions/retransmissions (3 bits).
+ //  [11]:              1=Response, 0=not
+ //  [15:12]:   Reserved
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ ///
+#define STAT_PMStatus                                  8
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // 16-bit STAT_OLRError_DS, STAT_OLRError_US, STAT_PMError
+ // [3:0]:          OLR/PM response reason code
+ // [7:4]:             OLR/PM Internal error code
+ // [15:8]:         OLR/PM Reserved for future
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ ///
+#define STAT_OLRError_DS                               9
+#define STAT_OLRError_US                               10
+#define STAT_PMError                                   11
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_MacroState
+// MacroState reflects the high level state of the modem
+
+#define STAT_InitState                         0x0000
+#define STAT_ReadyState                                0x0001
+#define STAT_FailState                         0x0002
+#define STAT_IdleState                         0x0003
+#define STAT_QuietState                                0x0004
+#define STAT_GhsState                          0x0005
+#define STAT_FullInitState                     0x0006
+#define STAT_ShowTimeState                     0x0007
+#define STAT_FastRetrainState                  0x0008
+#define STAT_LoopDiagMode                      0x0009
+#define STAT_ShortInit                         0x000A  // Bis short initialization ///
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_Mode
+// ConfigurationMode indicates the mode of the current ADSL Link. In general, a modem may use
+// G.Hs or some other mechanism to negotiate the specific mode of operation.
+// The OPTN_modeControl CMV is used to select a set of desired modes.
+// The STAT_Mode CMV indicates which mode was actually selected.
+
+#define STAT_ConfigMode_T1413                  0x0001
+#define STAT_ConfigMode_G992_2_AB              0x0002
+#define STAT_ConfigMode_G992_1_A               0x0004
+#define STAT_ConfigMode_G992_1_B               0x0008
+#define STAT_ConfigMode_G992_1_C               0x0010
+#define STAT_ConfigMode_G992_2_C               0x0020
+
+#define STAT_ConfigMode_G992_3_A               0x0100
+#define STAT_ConfigMode_G992_3_B               0x0200
+#define STAT_ConfigMode_G992_3_I               0x0400
+#define STAT_ConfigMode_G992_3_J               0x0800
+#define STAT_ConfigMode_G992_3_L               0x1000
+
+#define STAT_ConfigMode_G992_4_A               0x2000
+#define STAT_ConfigMode_G992_4_I               0x4000
+
+#define STAT_ConfigMode_G992_5                 0x8000
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_DMTFramingMode
+// FramingMode indicates the DMT framing mde negotiated during initialization. The framing mode
+// status is not applicable in BIS mode and its value is undefined
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define STAT_FramingModeMask                   0x0003
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_Misc
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define STAT_OverlappedSpectrum                0x0008
+#define STAT_TCM                       0x0010
+#define STAT_TDQ_at_1104               0x0020
+#define STAT_T1413_Signal_Detected     0x0040
+#define STAT_AnnexL_US_Mask1_PSD       0x1000  //indicate we actually selected G992.3 AnnexL US PSD mask1
+#define STAT_AnnexL_US_Mask2_PSD       0x2000  //indicate we actually selected G992.3 AnnexL US PSD mask2
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_FailureState
+// when the MacroSTate indicates the fail state, FailureState provides a failure code
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define E_CODE_NO_ERROR                                                                0
+#define E_CODE_BAT_TX                                                          1       // TX BAT table is incorrect */
+#define E_CODE_BAT_RX                                                          2       //  RX BAT table is incorrect */
+#define E_CODE_PROFILE                                                         3       //  profile is not selected in fast retrain */
+#define E_CODE_TX_AOC_FIFO_OVERFLOW                                            4
+#define E_CODE_TRUNCATE_FR                                                     5       //Fast Retrain truncated due to no stored profiles*/
+#define E_CODE_BITLOAD                                                         6       //  bit loading fails */
+#define E_CODE_ST_ERROR                                                                7       //  showtime CRC error */
+#define E_CODE_RESERVED                                                                8       //  using parameters reserved by the ITU-T */
+#define E_CODE_C_TONES                                                         9       //  detected C_TONES */
+#define E_CODE_CODESWAP_ERR                                                    10      //  codeswap not finished in time */
+#define E_CODE_FIFO_OVERFLOW                                                   11      // we have run out of fifo space */
+#define E_CODE_C_BG_DECODE_ERR                                                 12      // error in decoding C-BG message */
+#define E_CODE_C_RATES2_DECODE_ERR                                             13      // error in decoding C-MSGS2 and C-RATES2 */
+#define E_CODE_RCMedleyRx_C_SEGUE2_Failure                                     14      //  Timeout after RCMedleyRx waiting for C_SEGUE2 */
+#define E_CODE_RReverbRATx_C_SEGUE2_Failure                                    15      //  Timeout after RReverbRATx waiting for C_SEGUE2 */
+#define E_CODE_RReverb3Tx_C_SEGUE1_Failure                                     16      //  Timeout after RReverb3Tx waiting for C_SEGUE1 */
+#define E_CODE_RCCRC2Rx_C_RATES1_DECOD_ERR                                     17      //  Received CRC not equal to computed CRC */
+#define E_CODE_RCCRC1Rx_C_RATES1_DECOD_ERR                                     18      //  Received CRC not equal to computed CRC */
+#define E_CODE_RReverb5Tx_C_SEGUE2_Failure                                     19      //  Timeout after RReverb5Tx waiting for C_SEGUE2 */
+#define E_CODE_RReverb6Tx_C_SEGUE3_Failure                                     20      //  Timeout after RReverb6Tx waiting for C_SEGUE3 */
+#define E_CODE_RSegue5Tx_C_SEGUE3_Failure                                      21      //  Timeout after RSegue5Tx waiting for C_SEGUE3 */
+#define E_CODE_RCReverb5Rx_C_SEGUE_Failure                                     22      //  Timeout after RCReverb5Rx waiting for C_SEGUE */
+#define E_CODE_RCReverbRARx_C_SEGUE2_Failure                                   23      //  Timeout after RCReverbRARx waiting for C_SEGUE2 */
+#define E_CODE_RCCRC4Rx_CMSGS2_DECOD_ERR                                       24      //  Received CRC not equal to computed CRC */
+#define E_CODE_RCCRC5Rx_C_BG_DECOD_ERR                                         25      //  Received CRC not equal to computed CRC */
+#define E_CODE_RCCRC3Rx_DECOD_ERR                                              26      //  Received CRC not equal to computed CRC */
+#define E_CODE_RCPilot3_DEC_PATH_DEL_TIMEOUT                                   27      //  DEC Path Delay timeout */
+#define E_CODE_RCPilot3_DEC_TRAINING_TIMEOUT                                   28      //  DEC Training timeout */
+#define E_CODE_RCReverb3Rx_C_SEGUE1_Failure                                    29      //  Timeout after RCReverb3Rx waiting for C_SEGUE1 */
+#define E_CODE_RCReverb2Rx_SignalEnd_Failure                                   30      //  Timeout waiting for the end of RCReverb2Rx signal */
+#define E_CODE_RQuiet2_SignalEnd_Failure                                       31      //  Timeout waiting for the end of RQuiet2 signal */
+#define E_CODE_RCReverbFR1Rx_Failure                                           32      //  Timeout waiting for the end of RCReverbFR1Rx signal */
+#define E_CODE_RCPilotFR1Rx_SignalEnd_Failure                                  33      //  Timeout waiting for the end of RCPilotFR1Rx signal */
+#define E_CODE_RCReverbFR2Rx_C_Segue_Failure                                   34      //  Timeout after RCReverbFR2Rx waiting for C_SEGUE */
+#define E_CODE_RCReverbFR5Rx_SignalEnd_TIMEOUT                                 35      //  Timeout waiting for the end of RCReverbFR5Rx signal */
+#define E_CODE_RCReverbFR6Rx_C_SEGUE_Failure                                   36      //  Timeout after RCReverbFR6Rx waiting for C_SEGUE */
+#define E_CODE_RCReverbFR8Rx_C_SEGUE_FR4_Failure                               37      //  Timeout after RCReverbFR8Rx waiting for C_SEGUE_FR4 */
+#define E_CODE_RCReverbFR8Rx_No_PROFILE                                                38      //  Timeout since no profile was selected */
+#define E_CODE_RCReverbFR8Rx_SignalEnd_TIMEOUT                                 39      //  Timeout waiting for the end of RCReverbFR8Rx signal */
+#define E_CODE_RCCRCFR1_DECOD_ERR                                              40      //  Received CRC not equal to computed CRC */
+#define E_CODE_RCRecovRx_SingnalEnd_TIMEOUT                                    41      //  Timeout waiting for the end of RCRecovRx signal */
+#define E_CODE_RSegueFR5Tx_TX_Not_Ready_TIMEOUT                                        42      //  Timeout after RSegueFR5Tx waiting for C_SEGUE2 */
+#define E_CODE_RRecovTx_SignalEnd_TIMEOUT                                      43      //  Timeout waiting for the end of RRecovTx signal */
+#define E_CODE_RCMedleyFRRx_C_SEGUE2_Failure                                   44      //  Timeout after RCMedleyFRRx waiting for C_SEGUE2 */
+#define E_CODE_CONFIGURATION_PARAMETERS_ERROR                                  45      // one of the configuration parameters do not meet the standard */
+#define E_CODE_BAD_MEM_ACCESS                                                  46
+#define E_CODE_BAD_INSTRUCTION_ACCESS                                          47
+#define E_CODE_TX_EOC_FIFO_OVERFLOW                                            48
+#define E_CODE_RX_EOC_FIFO_OVERFLOW                                            49
+#define E_CODE_GHS_CD_FLAG_TIME_OUT                                            50      // Timeout when transmitting Flag in handshake cleardown */
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//STAT_OLRStatus:
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define STAT_OLRPM_IDLE                                 0x0000
+#define STAT_OLRPM_IN_PROGRESS                          0x0001
+#define STAT_OLRPM_COMPLETE                             0x0002
+#define STAT_OLRPM_ABORTED                              0x0003
+#define STAT_OLRPM_RESPONSE                            0x0800
+
+#define STAT_OLR_BITSWAP                                0x0010
+#define STAT_OLR_DRR                                   0x0020
+#define STAT_OLR_SRA                                   0x0030
+
+//STAT_PMStatus_US:
+#define STAT_PM_CO_REQ                                  0x0004
+#define STAT_PM_SIMPLE_REQ                              0x0010
+#define STAT_PM_L2_REQ                                 0x0020
+#define STAT_PM_L2_TRIM_REQ                            0x0030
+
+// STAT_OLRError_DS, STAT_OLRError_US
+//4 bit response reason code:
+#define RESP_BUSY                                      0x01
+#define RESP_INVALID_PARAMETERS                                0x02
+#define RESP_NOT_ENABLED                               0x03
+#define RESP_NOT_SUPPORTED                             0x04
+
+//4 bit internal error code (common for OLR and PM)
+#define REQ_INVALID_BiGi                               0x10
+#define REQ_INVALID_Lp                                 0x20
+#define REQ_INVALID_Bpn                                        0x30
+#define REQ_INVALID_FRAMING_CONSTRAINT                 0x40
+#define REQ_NOT_IN_L0_STATE                            0x50
+#define REQ_NOT_IN_L2_STATE                            0x60
+#define REQ_INVALID_PCB                                        0x70
+#define REQ_VIOLATES_MARGIN                            0x80
+
+//STAT_PMError
+//4 bit response reason code:
+#define RESP_STATE_NOT_DESIRED                          0x03
+#define RESP_INFEASIBLE_PARAMETERS                      0x04
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN register address and bit field definitions
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_ModeControl                               0
+#define OPTN_DMTLnkCtl                                 1
+// Reserved                                             2
+#define OPTN_GhsControl                                        3
+// Reserved                                             4
+#define OPTN_PwrManControl                             5
+#define OPTN_AnnexControl                              6
+#define OPTN_ModeControl1                              7
+// Reserved                                             8
+#define OPTN_StateMachineCtrl                          9
+// Reserved                                             10
+// Reserved                                             11
+#define OPTN_BisLinkControl                            12
+#define OPTN_ATMAddrConfig                             13
+#define OPTN_ATMNumCellConfig                          14
+
+// Mode control defines the allowable operating modes of an ADSL link. In general, a modem may ///
+// use G.Hs or some other mechanism to negotiate the specific mode of operation. ///
+// The OPTN_ModeControl CMV is used to select a set of desired modes ///
+// The STAT_ModeControl CMV indicates which mode was actually selected ///
+
+// OPTN_ModeControl
+#define OPTN_ConfigMode_T1413                  0x0001
+#define OPTN_ConfigMode_G992_2_AB              0x0002
+#define OPTN_ConfigMode_G992_1_A               0x0004
+#define OPTN_ConfigMode_G992_1_B               0x0008
+#define OPTN_ConfigMode_G992_1_C               0x0010
+#define OPTN_ConfigMode_G992_2_C               0x0020
+
+#define OPTN_ConfigMode_G992_3_A               0x0100
+#define OPTN_ConfigMode_G992_3_B               0x0200
+#define OPTN_ConfigMode_G992_3_I               0x0400
+#define OPTN_ConfigMode_G992_3_J               0x0800
+#define OPTN_ConfigMode_G992_3_L               0x1000
+
+#define OPTN_ConfigMode_G992_4_A               0x2000
+#define OPTN_ConfigMode_G992_4_I               0x4000
+
+#define OPTN_ConfigMode_G992_5                 0x8000
+
+// OPTN_PwrManControl
+#define OPTN_PwrManWakeUpGhs                   0x1
+#define OPTN_PwrManWakeUpFR                    0x2
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN_DMT Link Control
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+#define OPTN_DMT_DualLatency_Dis                0x200
+#define OPTN_DMT_S_Dis                          0x100
+#define OPTN_DMT_FRAMINGMODE                   0x1
+#define OPTN_DMT_FRAMINGMODE_MASK              0x7
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN_BIS Link Control
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+#define OPTN_BisLinkContrl_LineProbeDis         0x1
+#define OPTN_BisLinkContrl_DSBlackBitsEn        0x2
+#define OPTN_BisLinkContrl_DiagnosticModeEn     0x4
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN_GhsControl
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//
+// for OPTN_GhsControl, we will assign 16bit word as follows
+// bit 0~3: set the control over which start(initial) message CPE will send:
+//
+//              BIT: 2  1  0
+//                       0  0  1  CLR
+//                       0  1  0  MR
+//                       0  1  1  MS
+//                       1  0  0  MP
+//
+//  // bit 4~6: set the control over which message will be sent when we get at lease one CL/CLR exchange
+//        BIT: 5  4
+//                   0  1  MS
+//                       1  0  MR
+//                       1  1  MP
+//
+//  // bit 15: RT initiated G.hs sample sessions one through eight.  Session one is default.
+//        BIT: 15
+//                        1  means session one
+//
+///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_GHS_ST_GHS                                        0x8000
+#define OPTN_GHS_INIT_MASK                             0x000F
+#define OPTN_GHS_RESP_MASK                             0x00F0
+
+#define OPTN_RTInitTxMsg_CLR                           0x0001
+#define OPTN_RTInitTxMsg_MR                            0x0002
+#define OPTN_RTInitTxMsg_MS                            0x0003
+#define OPTN_RTInitTxMsg_MP                            0x0004
+
+#define OPTN_RTRespTxMsg_MS                            0x0010
+#define OPTN_RTRespTxMsg_MR                            0x0020
+#define OPTN_RTRespTxMsg_MP                            0x0030
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//      OPTN_AnnexControl
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+// G.992.3 Annex A/L1/L2 US PSD Mask preferred
+
+#define OPTN_G992_3_AnnexA_PreferredModeMask           0x3000
+#define OPTN_G992_3_AnnexA_PreferredModeA              0x0000  // default AnnexA PSD mask ///
+#define OPTN_G992_3_AnnexA_PreferredModeL1             0x1000  // AnnexL wide spectrum upstream PSD mask ///
+#define OPTN_G992_3_AnnexA_PreferredModeL2             0x2000  // AnnexL narrow spectrum upstream PSD mask ///
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//OPTN_ATMAddrConfig
+// Bits 4:0             are Utopia address for BC1
+// Bits 9:5             are Utopia address for BC0
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_UTPADDR_BC1                               0x001F
+#define OPTN_UTPADDR_BC0                               0x03E0
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//OPTN_ATMNumCellConfig
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_BC1_NUM_CELL_PAGES                                0x000F  // Bits 0:3 ///
+#define OPTN_BC0_NUM_CELL_PAGES                                0x00F0  // Bits 4:7 ///
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// CNFG register address field ///
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+///////////////////////////////////////////
+// these cmvs are used by bis handshake ///
+///////////////////////////////////////////
+
+// Each of the CNFG_TPS entries points to a structure of type (TPS_TC_BearerChannel_t)
+#define CNFG_TPS_TC_DS0                                        0
+#define CNFG_TPS_TC_DS1                                        1
+#define CNFG_TPS_TC_US0                                        2
+#define CNFG_TPS_TC_US1                                        3
+
+#define CNFG_HDLC_Overhead_Requirements                        4
+
+// Each of the CNFG_PMS entries points to a structure of type (PMS_TC_LatencyPath_t)
+#define CNFG_PMS_TC_DS0                                        5
+#define CNFG_PMS_TC_DS1                                        6
+#define CNFG_PMS_TC_US0                                        7
+#define CNFG_PMS_TC_US1                                        8
+
+// CNFG_PMD_PARAMETERS points to a structure of type (PMD_params_t)
+#define CNFG_PMD_PARAMETERS                            9
+
+////////////////////////////////////////////////////////////
+// these cmvs are used by bis training and showtime code ///
+////////////////////////////////////////////////////////////
+
+////////////////
+// Tx Config ///
+////////////////
+#define CNFG_tx_Cnfg_Nbc                               10
+#define CNFG_tx_Cnfg_Nlp                               11
+#define CNFG_tx_Cnfg_Rp                                        12
+#define CNFG_tx_Cnfg_Mp                                        13
+#define CNFG_tx_Cnfg_Lp                                        14
+#define CNFG_tx_Cnfg_Tp                                        15
+#define CNFG_tx_Cnfg_Dp                                        16
+#define CNFG_tx_Cnfg_Bpn                               17
+#define CNFG_tx_Cnfg_FramingMode                       18
+#define CNFG_tx_Cnfg_MSGLp                             19
+#define CNFG_tx_Cnfg_MSGc                              20
+
+////////////////
+// Rx Config ///
+////////////////
+#define CNFG_rx_Cnfg_Nbc                               21
+#define CNFG_rx_Cnfg_Nlp                               22
+#define CNFG_rx_Cnfg_Rp                                        23
+#define CNFG_rx_Cnfg_Mp                                        24
+#define CNFG_rx_Cnfg_Lp                                        25
+#define CNFG_rx_Cnfg_Tp                                        26
+#define CNFG_rx_Cnfg_Dp                                        27
+#define CNFG_rx_Cnfg_Bpn                               28
+#define CNFG_rx_Cnfg_FramingMode                       29
+#define CNFG_rx_Cnfg_MSGLp                             30
+#define CNFG_rx_Cnfg_MSGc                              31
+
+#define CNFG_tx_Cnfg_BCnToLPp                          32
+#define CNFG_rx_Cnfg_BCnToLPp                          33
+
+#endif
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_linux.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_mei_linux.h
new file mode 100644 (file)
index 0000000..79849ae
--- /dev/null
@@ -0,0 +1,112 @@
+/******************************************************************************
+**
+** FILE NAME    : ifxmips_mei_linux.h
+** PROJECT      : Danube
+** MODULES      : MEI
+**
+** DATE         : 1 Jan 2006
+** AUTHOR       : TC Chen
+** DESCRIPTION  : MEI Driver
+** COPYRIGHT    :       Copyright (c) 2006
+**                      Infineon Technologies AG
+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+**    This program is free software; you can redistribute it and/or modify
+**    it under the terms of the GNU General Public License as published by
+**    the Free Software Foundation; either version 2 of the License, or
+**    (at your option) any later version.
+**
+** HISTORY
+** $Version $Date      $Author     $Comment
+*******************************************************************************/
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <asm/semaphore.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <asm/uaccess.h>
+
+#undef CONFIG_DEVFS_FS         //165204:henryhsu devfs will make mei open file fail.
+
+#ifdef CONFIG_DEVFS_FS
+#include <linux/devfs_fs_kernel.h>
+#endif
+#ifdef CONFIG_PROC_FS
+#include <linux/proc_fs.h>
+#endif
+
+#include <linux/list.h>
+#include <linux/delay.h>
+#define __LINUX__
+
+#ifdef CONFIG_PROC_FS
+#define PROC_ITEMS 8
+#define MEI_DIRNAME     "mei"
+#endif
+
+#include <asm/ifxmips/ifxmips.h>
+#include <asm/ifxmips/ifxmips_irq.h>
+#include <asm/ifxmips/ifxmips_mei.h>
+#include <asm/ifxmips/ifxmips_mei_app.h>
+#include <asm/ifxmips/ifxmips_mei_ioctl.h>
+#include <asm/ifxmips/ifxmips_mei_app_ioctl.h>
+#include <asm/ifxmips/ifxmips_gpio.h>
+#include <asm/ifxmips/ifxmips_led.h>
+#include <asm/ifxmips/ifxmips_irq.h>
+
+#ifdef CONFIG_DEVFS_FS
+#define IFXMIPS_DEVNAME  "ifxmips"
+#endif //ifdef CONFIG_DEVFS_FS
+
+#define MEI_LOCKINT(var) \
+        local_save_flags(var);\
+        local_irq_disable()
+#define MEI_UNLOCKINT(var) \
+        local_irq_restore(var)
+
+#define MEI_MUTEX_INIT(id,flag) \
+        sema_init(&id,flag)
+#define MEI_MUTEX_LOCK(id) \
+        down_interruptible(&id)
+#define MEI_MUTEX_UNLOCK(id) \
+        up(&id)
+
+#define MEI_MASK_AND_ACK_IRQ \
+        ifxmips_mask_and_ack_irq
+
+#define MEI_DISABLE_IRQ \
+        disable_irq
+#define MEI_ENABLE_IRQ \
+        enable_irq
+
+#define MEI_WAIT(ms) \
+        {\
+                set_current_state(TASK_INTERRUPTIBLE);\
+                schedule_timeout(ms);\
+        }
+
+#define MEI_INIT_WAKELIST(name,queue) \
+        init_waitqueue_head(&queue)
+
+#define MEI_WAIT_EVENT_TIMEOUT(ev,timeout)\
+        interruptible_sleep_on_timeout(&ev,timeout)
+
+#define MEI_WAIT_EVENT(ev)\
+        interruptible_sleep_on(&ev)
+#define MEI_WAKEUP_EVENT(ev)\
+        wake_up_interruptible(&ev)
+
+typedef unsigned long MEI_intstat_t;
+typedef struct semaphore MEI_mutex_t;
+typedef struct file MEI_file_t;
+typedef struct inode MEI_inode_t;
+
+extern void mask_and_ack_ifxmips_irq (unsigned int irq_nr);
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_pmu.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_pmu.h
new file mode 100644 (file)
index 0000000..dd1f0d6
--- /dev/null
@@ -0,0 +1,32 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _IFXMIPS_PMU_H__
+#define _IFXMIPS_PMU_H__
+
+
+#define IFXMIPS_PMU_PWDCR_DMA          0x0020
+#define IFXMIPS_PMU_PWDCR_USB          0x8041
+#define IFXMIPS_PMU_PWDCR_LED          0x0800
+#define IFXMIPS_PMU_PWDCR_GPT          0x1000
+#define IFXMIPS_PMU_PWDCR_PPE          0x2000
+#define IFXMIPS_PMU_PWDCR_FPI          0x4000
+
+void ifxmips_pmu_enable(unsigned int module);
+void ifxmips_pmu_disable(unsigned int module);
+
+#endif
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_prom.h b/target/linux/ifxmips/files/arch/mips/include/asm/ifxmips/ifxmips_prom.h
new file mode 100644 (file)
index 0000000..e640ad7
--- /dev/null
@@ -0,0 +1,26 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2008 John Crispin <blogic@openwrt.org>
+ */
+#ifndef _IFXPROM_H__
+#define _IFXPROM_H__
+
+extern void prom_printf(const char *fmt, ...);
+extern u32 *prom_get_cp1_base(void);
+extern u32 prom_get_cp1_size(void);
+extern int ifxmips_has_brn_block(void);
+
+#endif
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/cgu.h b/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/cgu.h
new file mode 100644 (file)
index 0000000..9ee287b
--- /dev/null
@@ -0,0 +1,64 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2007 John Crispin <blogic@openwrt.org> 
+ */
+
+#ifndef _IFXMIPS_CGU_H__
+#define _IFXMIPS_CGU_H__
+
+#define BASIC_INPUT_CLOCK_FREQUENCY_1   35328000
+#define BASIC_INPUT_CLOCK_FREQUENCY_2   36000000
+
+#define BASIS_INPUT_CRYSTAL_USB         12000000
+
+#define GET_BITS(x, msb, lsb)           (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
+
+#define CGU_PLL0_PHASE_DIVIDER_ENABLE   (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 31))
+#define CGU_PLL0_BYPASS                 (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 30))
+#define CGU_PLL0_CFG_DSMSEL             (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 28))
+#define CGU_PLL0_CFG_FRAC_EN            (ifxmips_r32(IFXMIPS_CGU_PLL0_CFG) & (1 << 27))
+#define CGU_PLL1_SRC                    (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 31))
+#define CGU_PLL1_BYPASS                 (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 30))
+#define CGU_PLL1_CFG_DSMSEL             (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 28))
+#define CGU_PLL1_CFG_FRAC_EN            (ifxmips_r32(IFXMIPS_CGU_PLL1_CFG) & (1 << 27))
+#define CGU_PLL2_PHASE_DIVIDER_ENABLE   (ifxmips_r32(IFXMIPS_CGU_PLL2_CFG) & (1 << 20))
+#define CGU_PLL2_BYPASS                 (ifxmips_r32(IFXMIPS_CGU_PLL2_CFG) & (1 << 19))
+#define CGU_SYS_FPI_SEL                 (1 << 6)
+#define CGU_SYS_DDR_SEL                 0x3
+#define CGU_PLL0_SRC                    (1 << 29)
+
+#define CGU_PLL0_CFG_PLLK               GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 26, 17)
+#define CGU_PLL0_CFG_PLLN               GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 12, 6)
+#define CGU_PLL0_CFG_PLLM               GET_BITS(*IFXMIPS_CGU_PLL0_CFG, 5, 2)
+#define CGU_PLL1_CFG_PLLK               GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 26, 17)
+#define CGU_PLL1_CFG_PLLN               GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 12, 6)
+#define CGU_PLL1_CFG_PLLM               GET_BITS(*IFXMIPS_CGU_PLL1_CFG, 5, 2)
+#define CGU_PLL2_SRC                    GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 18, 17)
+#define CGU_PLL2_CFG_INPUT_DIV          GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 16, 13)
+#define CGU_PLL2_CFG_PLLN               GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 12, 6)
+#define CGU_PLL2_CFG_PLLM               GET_BITS(*IFXMIPS_CGU_PLL2_CFG, 5, 2)
+#define CGU_IF_CLK_PCI_CLK              GET_BITS(*IFXMIPS_CGU_IF_CLK, 23, 20)
+
+
+unsigned int cgu_get_mips_clock(int cpu);
+unsigned int cgu_get_io_region_clock(void);
+unsigned int cgu_get_fpi_bus_clock(int fpi);
+void cgu_setup_pci_clk(int internal_clock);
+unsigned int ifxmips_get_ddr_hz(void);
+unsigned int ifxmips_get_fpi_hz(void);
+unsigned int ifxmips_get_cpu_hz(void);
+
+#endif
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/gpio.h b/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/gpio.h
new file mode 100644 (file)
index 0000000..fa70ebc
--- /dev/null
@@ -0,0 +1,105 @@
+/*
+ *   include/asm-mips/mach-ifxmips/gpio.h
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#ifndef _IFXMIPS_GPIO_H_
+#define _IFXMIPS_GPIO_H_
+
+#include <asm/ifxmips/ifxmips.h>
+#include <asm/ifxmips/ifxmips_gpio.h>
+
+#define GPIO_TO_PORT(x) ((x > 15) ? (1) : (0))
+#define GPIO_TO_GPIO(x) ((x > 15) ? (x-16) : (x))
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+       ifxmips_port_set_open_drain(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+       ifxmips_port_clear_altsel0(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+       ifxmips_port_clear_altsel1(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+       ifxmips_port_set_dir_in(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+       return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+       ifxmips_port_clear_open_drain(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+       ifxmips_port_clear_altsel0(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+       ifxmips_port_clear_altsel1(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+       ifxmips_port_set_dir_out(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+       return 0;
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+       ifxmips_port_get_input(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+       return 0;
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+       if (value)
+               ifxmips_port_set_output(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
+       else
+               ifxmips_port_clear_output(GPIO_TO_PORT(gpio),
+                       GPIO_TO_GPIO(gpio));
+}
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+       return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+       return 0;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+       return 0;
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+       return 0;
+}
+
+static inline int gpio_get_value_cansleep(unsigned gpio)
+{
+       might_sleep();
+       return gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value_cansleep(unsigned gpio, int value)
+{
+       might_sleep();
+       gpio_set_value(gpio, value);
+}
+
+static inline int gpio_is_valid(int number)
+{
+       return ((unsigned)number) < 16;
+}
+
+#endif
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/irq.h b/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/irq.h
new file mode 100644 (file)
index 0000000..80342ae
--- /dev/null
@@ -0,0 +1,28 @@
+/*
+ *   include/asm-mips/mach-ifxmips/irq.h
+ *
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#ifndef __IFXMIPS_IRQ_H
+#define __IFXMIPS_IRQ_H
+
+#define NR_IRQS 256
+#include_next <irq.h>
+
+#endif
diff --git a/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/war.h b/target/linux/ifxmips/files/arch/mips/include/asm/mach-ifxmips/war.h
new file mode 100644 (file)
index 0000000..de3584e
--- /dev/null
@@ -0,0 +1,24 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#ifndef __ASM_MIPS_MACH_IFXMIPS_WAR_H
+#define __ASM_MIPS_MACH_IFXMIPS_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR     0
+#define R4600_V1_HIT_CACHEOP_WAR        0
+#define R4600_V2_HIT_CACHEOP_WAR        0
+#define R5432_CP0_INTERRUPT_WAR         0
+#define BCM1250_M3_WAR                  0
+#define SIBYTE_1956_WAR                 0
+#define MIPS4K_ICACHE_REFILL_WAR        0
+#define MIPS_CACHE_SYNC_WAR             0
+#define TX49XX_ICACHE_INDEX_INV_WAR     0
+#define RM9000_CDEX_SMP_WAR             0
+#define ICACHE_REFILLS_WORKAROUND_WAR   0
+#define R10000_LLSC_WAR                 0
+#define MIPS34K_MISSED_ITLB_WAR         0
+
+#endif
index d492dada5bb74f47c09692e355d648eff0260b40..ac81ee3bf42ff8ed7b06563b1d976077c368bb70 100644 (file)
@@ -6,7 +6,7 @@
 #include <linux/mm.h>
 #include <asm/ifxmips/ifxmips.h>
 #include <asm/ifxmips/ifxmips_irq.h>
 #include <linux/mm.h>
 #include <asm/ifxmips/ifxmips.h>
 #include <asm/ifxmips/ifxmips_irq.h>
-#include <asm/ifxmips/ifxmips_cgu.h>
+#include <asm/mach-ifxmips/cgu.h>
 #include <asm/addrspace.h>
 #include <linux/vmalloc.h>
 
 #include <asm/addrspace.h>
 #include <linux/vmalloc.h>
 
index a2d30cd0b6deb60064c12e4bb30ecaa2558d06e4..6498d12cb1511f7969fda5aa5db9528743d2cbab 100644 (file)
@@ -134,8 +134,8 @@ int find_uImage_size(unsigned long start_offset)
        unsigned long magic;
        unsigned long temp;
        ifxmips_copy_from(&ifxmips_map, &magic, start_offset, 4);
        unsigned long magic;
        unsigned long temp;
        ifxmips_copy_from(&ifxmips_map, &magic, start_offset, 4);
-       if (!(ntohl(magic) == 0x27051956)) {
-               printk(KERN_INFO "ifxmips_mtd: invalid magic (0x%08X) of kernel at 0x%08lx \n", ntohl(magic), start_offset);
+       if (le32_to_cpu(magic) != 0x56190527) {
+               printk(KERN_INFO "ifxmips_mtd: invalid magic (0x%08X) of kernel at 0x%08lx \n", le32_to_cpu(magic), start_offset);
                return 0;
        }
        ifxmips_copy_from(&ifxmips_map, &temp, start_offset + 12, 4);
                return 0;
        }
        ifxmips_copy_from(&ifxmips_map, &temp, start_offset + 12, 4);
@@ -159,7 +159,7 @@ int detect_squashfs_partition(unsigned long start_offset)
 {
        unsigned long temp;
        ifxmips_copy_from(&ifxmips_map, &temp, start_offset, 4);
 {
        unsigned long temp;
        ifxmips_copy_from(&ifxmips_map, &temp, start_offset, 4);
-       return temp == SQUASHFS_MAGIC;
+       return le32_to_cpu(temp) == SQUASHFS_MAGIC;
 }
 
 static int ifxmips_mtd_probe(struct platform_device *dev)
 }
 
 static int ifxmips_mtd_probe(struct platform_device *dev)
index 1185a15372708f23b40459392fb824e929017a25..0fddc631ba6ad8cdaf3da71819c994a692035531 100644 (file)
@@ -79,7 +79,7 @@ EXPORT_SYMBOL(ifxmips_read_mdio);
 
 int ifxmips_ifxmips_mii_open(struct net_device *dev)
 {
 
 int ifxmips_ifxmips_mii_open(struct net_device *dev)
 {
-       struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)dev->priv;
+       struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(dev);
        struct dma_device_info *dma_dev = priv->dma_device;
        int i;
 
        struct dma_device_info *dma_dev = priv->dma_device;
        int i;
 
@@ -93,7 +93,7 @@ int ifxmips_ifxmips_mii_open(struct net_device *dev)
 
 int ifxmips_mii_release(struct net_device *dev)
 {
 
 int ifxmips_mii_release(struct net_device *dev)
 {
-       struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)dev->priv;
+       struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(dev);
        struct dma_device_info *dma_dev = priv->dma_device;
        int i;
 
        struct dma_device_info *dma_dev = priv->dma_device;
        int i;
 
@@ -105,7 +105,7 @@ int ifxmips_mii_release(struct net_device *dev)
 
 int ifxmips_mii_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev)
 {
 
 int ifxmips_mii_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev)
 {
-       struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)dev->priv;
+       struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(dev);
        unsigned char *buf = NULL;
        struct sk_buff *skb = NULL;
        int len = 0;
        unsigned char *buf = NULL;
        struct sk_buff *skb = NULL;
        int len = 0;
@@ -154,7 +154,7 @@ ifxmips_mii_hw_receive_err_exit:
 int ifxmips_mii_hw_tx(char *buf, int len, struct net_device *dev)
 {
        int ret = 0;
 int ifxmips_mii_hw_tx(char *buf, int len, struct net_device *dev)
 {
        int ret = 0;
-       struct ifxmips_mii_priv *priv = dev->priv;
+       struct ifxmips_mii_priv *priv = netdev_priv(dev);
        struct dma_device_info *dma_dev = priv->dma_device;
        ret = dma_device_write(dma_dev, buf, len, priv->skb);
        return ret;
        struct dma_device_info *dma_dev = priv->dma_device;
        ret = dma_device_write(dma_dev, buf, len, priv->skb);
        return ret;
@@ -164,7 +164,7 @@ int ifxmips_mii_tx(struct sk_buff *skb, struct net_device *dev)
 {
        int len;
        char *data;
 {
        int len;
        char *data;
-       struct ifxmips_mii_priv *priv = dev->priv;
+       struct ifxmips_mii_priv *priv = netdev_priv(dev);
        struct dma_device_info *dma_dev = priv->dma_device;
 
        len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
        struct dma_device_info *dma_dev = priv->dma_device;
 
        len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
@@ -192,7 +192,7 @@ int ifxmips_mii_tx(struct sk_buff *skb, struct net_device *dev)
 void ifxmips_mii_tx_timeout(struct net_device *dev)
 {
        int i;
 void ifxmips_mii_tx_timeout(struct net_device *dev)
 {
        int i;
-       struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)dev->priv;
+       struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(dev);
 
        priv->stats.tx_errors++;
        for (i = 0; i < priv->dma_device->max_tx_chan_num; i++)
 
        priv->stats.tx_errors++;
        for (i = 0; i < priv->dma_device->max_tx_chan_num; i++)
@@ -261,14 +261,13 @@ void ifxmips_etop_dma_buffer_free(unsigned char *dataptr, void *opt)
 
 static struct net_device_stats *ifxmips_get_stats(struct net_device *dev)
 {
 
 static struct net_device_stats *ifxmips_get_stats(struct net_device *dev)
 {
-       return (struct net_device_stats *)dev->priv;
+       return &((struct ifxmips_mii_priv *)netdev_priv(dev))->stats;
 }
 
 static int ifxmips_mii_dev_init(struct net_device *dev)
 {
        int i;
 }
 
 static int ifxmips_mii_dev_init(struct net_device *dev)
 {
        int i;
-       struct ifxmips_mii_priv *priv;
-
+       struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(dev);
        ether_setup(dev);
        printk(KERN_INFO "ifxmips_mii0: %s is up\n", dev->name);
        dev->open = ifxmips_ifxmips_mii_open;
        ether_setup(dev);
        printk(KERN_INFO "ifxmips_mii0: %s is up\n", dev->name);
        dev->open = ifxmips_ifxmips_mii_open;
@@ -277,8 +276,7 @@ static int ifxmips_mii_dev_init(struct net_device *dev)
        dev->get_stats = ifxmips_get_stats;
        dev->tx_timeout = ifxmips_mii_tx_timeout;
        dev->watchdog_timeo = 10 * HZ;
        dev->get_stats = ifxmips_get_stats;
        dev->tx_timeout = ifxmips_mii_tx_timeout;
        dev->watchdog_timeo = 10 * HZ;
-       memset(dev->priv, 0, sizeof(struct ifxmips_mii_priv));
-       priv = dev->priv;
+       memset(priv, 0, sizeof(struct ifxmips_mii_priv));
        priv->dma_device = dma_device_reserve("PPE");
        if (!priv->dma_device) {
                BUG();
        priv->dma_device = dma_device_reserve("PPE");
        if (!priv->dma_device) {
                BUG();
@@ -347,14 +345,13 @@ out:
 
 static int ifxmips_mii_remove(struct platform_device *dev)
 {
 
 static int ifxmips_mii_remove(struct platform_device *dev)
 {
-       struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)ifxmips_mii0_dev->priv;
+       struct ifxmips_mii_priv *priv = (struct ifxmips_mii_priv *)netdev_priv(ifxmips_mii0_dev);
 
        printk(KERN_INFO "ifxmips_mii0: ifxmips_mii0 cleanup\n");
 
        dma_device_unregister(priv->dma_device);
        dma_device_release(priv->dma_device);
        kfree(priv->dma_device);
 
        printk(KERN_INFO "ifxmips_mii0: ifxmips_mii0 cleanup\n");
 
        dma_device_unregister(priv->dma_device);
        dma_device_release(priv->dma_device);
        kfree(priv->dma_device);
-       kfree(ifxmips_mii0_dev->priv);
        unregister_netdev(ifxmips_mii0_dev);
        return 0;
 }
        unregister_netdev(ifxmips_mii0_dev);
        return 0;
 }
index e62d2fec38c5cc8bec11af99c1dcd6f92a2fdd7c..d75eeeac201a89f3f45575574546c0241ba16687 100644 (file)
@@ -25,7 +25,7 @@
 #include <linux/platform_device.h>
 #include <linux/uaccess.h>
 
 #include <linux/platform_device.h>
 #include <linux/uaccess.h>
 
-#include <asm/ifxmips/ifxmips_cgu.h>
+#include <asm/mach-ifxmips/cgu.h>
 #include <asm/ifxmips/ifxmips.h>
 
 #define IFXMIPS_WDT_PW1                        0x00BE0000
 #include <asm/ifxmips/ifxmips.h>
 
 #define IFXMIPS_WDT_PW1                        0x00BE0000
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_peripheral_definitions.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_peripheral_definitions.h
deleted file mode 100644 (file)
index 5bd788f..0000000
+++ /dev/null
@@ -1,119 +0,0 @@
-//*************************************************************************
-//* Summary of definitions which are used in each peripheral              *
-//*************************************************************************
-
-#ifndef peripheral_definitions_h
-#define peripheral_definitions_h
-
-////#include "cpu.h"
-//
-///* These files have to be included by each peripheral */
-//#include <sysdefs.h>
-//#include <excep.h>
-//#include <cpusubsys.h>
-//#include <sys_api.h>
-//#include <mips.h>
-//#include "SRAM_address_map.h"
-//
-///* common header files for all CPU's */
-//#include "iiu.h"
-//#include "bcu.h"
-//#include "FPI_address_map.h"
-//#include "direct_interrupts.h"
-
-/////////////////////////////////////////////////////////////////////////
-
-//extern  int _clz();
-//extern void _nop();
-//extern void _sleep();
-//extern void sys_enable_int();
-
-typedef unsigned char UINT8;
-typedef signed char INT8;
-typedef unsigned short UINT16;
-typedef signed short INT16;
-typedef unsigned int UINT32;
-typedef signed int INT32;
-typedef unsigned long long UINT64;
-typedef signed long long INT64;
-
-#define REG8( addr )             (*(volatile UINT8 *) (addr))
-#define REG16( addr )            (*(volatile UINT16 *)(addr))
-#define REG32( addr )            (*(volatile UINT32 *)(addr))
-#define REG64( addr )            (*(volatile UINT64 *)(addr))
-
-/* define routine to set FPI access in Supervisor Mode */
-#define IFX_SUPERVISOR_ON()                         REG32(FB0_CFG) = 0x01
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_OFF()                        REG32(FB0_CFG) = 0x00
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_MODE()                       REG32(FB0_CFG)
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_SET(svm)                     REG32(FB0_CFG) = svm
-/* enable all Interrupts in IIU */
-//#define IFX_ENABLE_IRQ(irq_mask, im_base)           REG32(im_base | IIU_MASK) = irq_mask
-///* get all high priority interrupt bits in IIU */
-//#define IFX_GET_IRQ_MASKED(im_base)                 REG32(im_base | IIU_IRMASKED)
-///* signal ends of interrupt to IIU */
-//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base)      REG32(im_base | IIU_IR) = irq_bit
-///* force IIU interrupt register */
-//#define IFX_FORCE_IIU_REGISTER(data, im_base)       REG32(im_base | IIU_IRDEBUG) = data
-///* get all bits of interrupt register */
-//#define IFX_GET_IRQ_UNMASKED(im_base)               REG32(im_base | IIU_IR)
-/* insert a NOP instruction */
-#define NOP                                     _nop()
-/* CPU goes to power down mode until interrupt occurs */
-#define IFX_CPU_SLEEP                               _sleep()
-/* enable all interrupts to CPU */
-#define IFX_CPU_ENABLE_ALL_INTERRUPT                sys_enable_int()
-/* get all low priority interrupt bits in peripheral */
-#define IFX_GET_LOW_PRIO_IRQ(int_reg)               REG32(int_reg)
-/* clear low priority interrupt bit in peripheral */
-#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg)    REG32(int_reg) = irq_bit
-/* write FPI bus */
-#define WRITE_FPI_BYTE(data, addr)              REG8(addr) = data
-#define WRITE_FPI_16BIT(data, addr)             REG16(addr) = data
-#define WRITE_FPI_32BIT(data, addr)             REG32(addr) = data
-/* read FPI bus */
-#define READ_FPI_BYTE(addr)                     REG8(addr)
-#define READ_FPI_16BIT(addr)                    REG16(addr)
-#define READ_FPI_32BIT(addr)                    REG32(addr)
-/* write peripheral register */
-#define WRITE_PERIPHERAL_REGISTER(data, addr)   REG32(addr) = data
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data
-#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data
-#else //not CONFIG_CPU_LITTLE_ENDIAN
-#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data
-#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data
-#endif //CONFIG_CPU_LITTLE_ENDIAN
-
-/* read peripheral register */
-#define READ_PERIPHERAL_REGISTER(addr)          REG32(addr)
-
-/* read/modify(or)/write peripheral register */
-#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data
-/* read/modify(and)/write peripheral register */
-#define RMW_AND_PERIPHERAL_REGISTER(data, addr)        REG32(addr) = REG32(addr) & (UINT32)data
-
-/* CPU-independent mnemonic constants */
-/* CLC register bits */
-#define IFX_CLC_ENABLE                0x00000000
-#define IFX_CLC_DISABLE               0x00000001
-#define IFX_CLC_DISABLE_STATUS        0x00000002
-#define IFX_CLC_SUSPEND_ENABLE        0x00000004
-#define IFX_CLC_CLOCK_OFF_DISABLE     0x00000008
-#define IFX_CLC_OVERWRITE_SPEN_FSOE   0x00000010
-#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020
-#define IFX_CLC_RUN_DIVIDER_MASK      0x0000FF00
-#define IFX_CLC_RUN_DIVIDER_OFFSET    8
-#define IFX_CLC_SLEEP_DIVIDER_MASK    0x00FF0000
-#define IFX_CLC_SLEEP_DIVIDER_OFFSET  16
-#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000
-#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24
-
-/* number of cycles to wait for interrupt service routine to be called */
-#define WAIT_CYCLES   50
-
-#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_ssc.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_ssc.h
deleted file mode 100644 (file)
index c6dd5d4..0000000
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * ifx_ssc.h defines some data sructures used in ifx_ssc.c
- *
- * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT)
- *
- *
- */
-
-#ifndef __IFX_SSC_H
-#define __IFX_SSC_H
-#ifdef __KERNEL__
-#include <asm/ifxmips/ifx_ssc_defines.h>
-#endif //__KERNEL__
-
-#define PORT_CNT               1       // assume default value
-
-/* symbolic constants to be used in SSC routines */
-
-// ### TO DO: bad performance
-#define IFX_SSC_TXFIFO_ITL     1
-#define IFX_SSC_RXFIFO_ITL     1
-
-struct ifx_ssc_statistics {
-       unsigned int abortErr;  /* abort error */
-       unsigned int modeErr;   /* master/slave mode error */
-       unsigned int txOvErr;   /* TX Overflow error */
-       unsigned int txUnErr;   /* TX Underrun error */
-       unsigned int rxOvErr;   /* RX Overflow error */
-       unsigned int rxUnErr;   /* RX Underrun error */
-       unsigned int rxBytes;
-       unsigned int txBytes;
-};
-
-struct ifx_ssc_hwopts {
-       unsigned int AbortErrDetect:1;  /* Abort Error detection (in slave mode) */
-       unsigned int rxOvErrDetect:1;   /* Receive Overflow Error detection */
-       unsigned int rxUndErrDetect:1;  /* Receive Underflow Error detection */
-       unsigned int txOvErrDetect:1;   /* Transmit Overflow Error detection */
-       unsigned int txUndErrDetect:1;  /* Transmit Underflow Error detection */
-       unsigned int echoMode:1;        /* Echo mode */
-       unsigned int loopBack:1;        /* Loopback mode */
-       unsigned int idleValue:1;       /* Idle value */
-       unsigned int clockPolarity:1;   /* Idle clock is high or low */
-       unsigned int clockPhase:1;      /* Tx on trailing or leading edge */
-       unsigned int headingControl:1;  /* LSB first or MSB first */
-       unsigned int dataWidth:6;       /* from 2 up to 32 bits */
-       unsigned int masterSelect:1;    /* Master or Slave mode */
-       unsigned int modeRxTx:2;        /* rx/tx mode */
-       unsigned int gpoCs:8;   /* choose outputs to use for chip select */
-       unsigned int gpoInv:8;  /* invert GPO outputs */
-};
-
-struct ifx_ssc_frm_opts {
-       bool FrameEnable;       // SFCON.SFEN
-       unsigned int DataLength;        // SFCON.DLEN
-       unsigned int PauseLength;       // SFCON.PLEN
-       unsigned int IdleData;  // SFCON.IDAT
-       unsigned int IdleClock; // SFCON.ICLK
-       bool StopAfterPause;    // SFCON.STOP
-};
-
-struct ifx_ssc_frm_status {
-       bool DataBusy;          // SFSTAT.DBSY
-       bool PauseBusy;         // SFSTAT.PBSY
-       unsigned int DataCount; // SFSTAT.DCNT
-       unsigned int PauseCount;        // SFSTAT.PCNT
-       bool EnIntAfterData;    // SFCON.IBEN
-       bool EnIntAfterPause;   // SFCON.IAEN
-};
-
-typedef struct {
-       char *buf;
-       size_t len;
-} ifx_ssc_buf_item_t;
-
-// data structures for batch execution
-typedef union {
-       struct {
-               bool save_options;
-       } init;
-       ifx_ssc_buf_item_t read;
-       ifx_ssc_buf_item_t write;
-       ifx_ssc_buf_item_t rd_wr;
-       unsigned int set_baudrate;
-       struct ifx_ssc_frm_opts set_frm;
-       unsigned int set_gpo;
-       struct ifx_ssc_hwopts set_hwopts;
-} ifx_ssc_batch_cmd_param;
-
-struct ifx_ssc_batch_list {
-       unsigned int cmd;
-       ifx_ssc_batch_cmd_param cmd_param;
-       struct ifx_ssc_batch_list *next;
-};
-
-#ifdef __KERNEL__
-#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE)
-
-struct ifx_ssc_port {
-       unsigned long mapbase;
-       struct ifx_ssc_hwopts opts;
-       struct ifx_ssc_statistics stats;
-       struct ifx_ssc_frm_status frm_status;
-       struct ifx_ssc_frm_opts frm_opts;
-       /* wait queue for ifx_ssc_read() */
-       wait_queue_head_t rwait, pwait;
-       int port_nr;
-       char port_is_open;      /* exclusive open  - boolean */
-//      int no_of_bits; /* number of _valid_ bits */
-//      int elem_size; /* shift for element (no of bytes)*/
-       /* buffer and pointers to the read/write position */
-       char *rxbuf;            /* buffer for RX */
-       char *rxbuf_end;        /* buffer end pointer for RX */
-       volatile char *rxbuf_ptr;       /* buffer write pointer for RX */
-       char *txbuf;            /* buffer for TX */
-       char *txbuf_end;        /* buffer end pointer for TX */
-       volatile char *txbuf_ptr;       /* buffer read pointer for TX */
-       unsigned int baud;
-       /* each channel has its own interrupts */
-       /* (transmit/receive/error/frame) */
-       unsigned int txirq, rxirq, errirq, frmirq;
-};
-/* default values for SSC configuration */
-// values of CON
-#define IFX_SSC_DEF_IDLE_DATA       1  /* enable */
-#define IFX_SSC_DEF_BYTE_VALID_CTL  1  /* enable */
-#define IFX_SSC_DEF_DATA_WIDTH      32 /* bits */
-#define IFX_SSC_DEF_ABRT_ERR_DETECT 0  /* disable */
-#define IFX_SSC_DEF_RO_ERR_DETECT   1  /* enable */
-#define IFX_SSC_DEF_RU_ERR_DETECT   0  /* disable */
-#define IFX_SSC_DEF_TO_ERR_DETECT   0  /* disable */
-#define IFX_SSC_DEF_TU_ERR_DETECT   0  /* disable */
-#define IFX_SSC_DEF_LOOP_BACK       0  /* disable */
-#define IFX_SSC_DEF_ECHO_MODE       0  /* disable */
-#define IFX_SSC_DEF_CLOCK_POLARITY  0  /* low */
-#define IFX_SSC_DEF_CLOCK_PHASE     1  /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */
-#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST
-#define IFX_SSC_DEF_MODE_RXTX      IFX_SSC_MODE_RXTX
-// other values
-#define IFX_SSC_DEF_MASTERSLAVE            IFX_SSC_MASTER_MODE /* master */
-#ifdef CONFIG_USE_EMULATOR
-#define IFX_SSC_DEF_BAUDRATE       10000
-#else
-#define IFX_SSC_DEF_BAUDRATE       2000000
-#endif
-#define IFX_SSC_DEF_RMC                    0x10
-
-#define IFX_SSC_DEF_TXFIFO_FL       8
-#define IFX_SSC_DEF_RXFIFO_FL       1
-
-#if 1                          //TODO
-#define IFX_SSC_DEF_GPO_CS         0x3 /* no chip select */
-#define IFX_SSC_DEF_GPO_INV        0   /* no chip select */
-#else
-#error "what is ur Chip Select???"
-#endif
-#define IFX_SSC_DEF_SFCON          0   /* no serial framing */
-#if 0
-#define IFX_SSC_DEF_IRNEN          IFX_SSC_T_BIT | /* enable all int's */\
-                                   IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT
-#endif
-#define IFX_SSC_DEF_IRNEN          IFX_SSC_T_BIT | /* enable all int's */\
-                                   IFX_SSC_R_BIT | IFX_SSC_E_BIT
-#endif /* __KERNEL__ */
-
-// batch execution commands
-#define IFX_SSC_BATCH_CMD_INIT         1
-#define IFX_SSC_BATCH_CMD_READ         2
-#define IFX_SSC_BATCH_CMD_WRITE                3
-#define IFX_SSC_BATCH_CMD_RD_WR                4
-#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5
-#define IFX_SSC_BATCH_CMD_SET_HWOPTS   6
-#define IFX_SSC_BATCH_CMD_SET_FRM      7
-#define IFX_SSC_BATCH_CMD_SET_GPO      8
-#define IFX_SSC_BATCH_CMD_FIFO_FLUSH   9
-//#define IFX_SSC_BATCH_CMD_    
-//#define IFX_SSC_BATCH_CMD_    
-#define IFX_SSC_BATCH_CMD_END_EXEC     0
-
-/* Macros to configure SSC hardware */
-/* headingControl: */
-#define IFX_SSC_LSB_FIRST            0
-#define IFX_SSC_MSB_FIRST            1
-/* dataWidth: */
-#define IFX_SSC_MIN_DATA_WIDTH       2
-#define IFX_SSC_MAX_DATA_WIDTH       32
-/* master/slave mode select */
-#define IFX_SSC_MASTER_MODE          1
-#define IFX_SSC_SLAVE_MODE           0
-/* rx/tx mode */
-// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h
-#define IFX_SSC_MODE_RXTX           0
-#define IFX_SSC_MODE_RX                     1
-#define IFX_SSC_MODE_TX                     2
-#define IFX_SSC_MODE_OFF            3
-#define IFX_SSC_MODE_MASK           IFX_SSC_MODE_RX | IFX_SSC_MODE_TX
-
-/* GPO values */
-#define IFX_SSC_MAX_GPO_OUT         7
-
-#define IFX_SSC_RXREQ_BLOCK_SIZE     32768
-
-/***********************/
-/* defines for ioctl's */
-/***********************/
-#define IFX_SSC_IOCTL_MAGIC     'S'
-/* read out the statistics */
-#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics)
-/* clear the statistics */
-#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2)
-/* set the baudrate */
-#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int)
-/* get the current baudrate */
-#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int)
-/* set hardware options */
-#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts)
-/* get the current hardware options */
-#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts)
-/* set transmission mode */
-#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int)
-/* get the current transmission mode */
-#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int)
-/* abort transmission */
-#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9)
-#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9)
-
-/* set general purpose outputs */
-#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int)
-/* clear general purpose outputs */
-#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int)
-/* get general purpose outputs */
-#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int)
-
-/*** serial framing ***/
-/* get status of serial framing */
-#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status)
-/* get counter reload values and control bits */
-#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts)
-/* set counter reload values and control bits */
-#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts)
-
-/*** batch execution ***/
-/* do batch execution */
-#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list)
-
-#ifdef __KERNEL__
-// routines from ifx_ssc.c
-// ### TO DO
-/* kernel interface for read and write */
-ssize_t ifx_ssc_kread (int, char *, size_t);
-ssize_t ifx_ssc_kwrite (int, const char *, size_t);
-
-#ifdef CONFIG_IFX_VP_KERNEL_TEST
-void ifx_ssc_tc (void);
-#endif // CONFIG_IFX_VP_KERNEL_TEST
-
-#endif //__KERNEL__
-#endif // __IFX_SSC_H
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_ssc_defines.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifx_ssc_defines.h
deleted file mode 100644 (file)
index 805d48a..0000000
+++ /dev/null
@@ -1,547 +0,0 @@
-#ifndef IFX_SSC_DEFINES_H
-#define IFX_SSC_DEFINES_H
-
-#include "ifx_peripheral_definitions.h"
-
-/* maximum SSC FIFO size */
-#define IFX_SSC_MAX_FIFO_SIZE 32
-
-/* register map of SSC  */
-
-/* address of the Clock Control Register of the SSC */
-#define IFX_SSC_CLC                 0x00000000
-/* IFX_SSC_CLC register is significant in bits 23 downto 8 and in bits 5, 3, 2, 0  
-   bit 1 is hardware modified*/
-#define IFX_SSC_CLC_readmask  0x00FFFFEF
-#define IFX_SSC_CLC_writemask 0x00FFFF3D
-#define IFX_SSC_CLC_hwmask    0x00000002
-#define IFX_SSC_CLC_dontcare (IFX_SSC_CLC_readmask & IFX_SSC_CLC_writemask & ~IFX_SSC_CLC_hwmask)
-
-/* address of Port Input Select Register of the SSC */
-#define IFX_SSC_PISEL 0x00000004
-/* IFX_SSC_PISEL register is significant in lowest three bits only */
-#define IFX_SSC_PISEL_readmask  0x00000007
-#define IFX_SSC_PISEL_writemask 0x00000007
-#define IFX_SSC_PISEL_hwmask    0x00000000
-#define IFX_SSC_PISEL_dontcare (IFX_SSC_PISEL_readmask & IFX_SSC_PISEL_writemask & ~IFX_SSC_PISEL_hwmask)
-
-/* address of Identification Register of the SSC */
-#define IFX_SSC_ID 0x00000008
-/* IFX_SSC_ID register is significant in no bit */
-#define IFX_SSC_ID_readmask  0x0000FF3F
-#define IFX_SSC_ID_writemask 0x00000000
-#define IFX_SSC_ID_hwmask    0x00000000
-#define IFX_SSC_ID_dontcare (IFX_SSC_ID_readmask & IFX_SSC_ID_writemask & ~IFX_SSC_ID_hwmask)
-
-/* address of the Control Register of the SSC */
-#define IFX_SSC_CON            0x00000010
-/* IFX_SSC_CON register is significant in bits 23:22, 20:16 and 12:0 */
-#define IFX_SSC_CON_readmask  0x01DF1FFF
-#define IFX_SSC_CON_writemask 0x01DF1FFF
-#define IFX_SSC_CON_hwmask    0x00000000
-#define IFX_SSC_CON_dontcare (IFX_SSC_CON_readmask & IFX_SSC_CON_writemask & ~IFX_SSC_CON_hwmask)
-
-/* address of the Status Register of the SSC */
-#define IFX_SSC_STATE          0x00000014
-/* IFX_SSC_STATE register is readable in bits 30:28, 26:24, 20:16, 12:7 and 2:0
-   all bits except 1:0 are hardware modified */
-#define IFX_SSC_STATE_readmask  0x771F3F87
-#define IFX_SSC_STATE_writemask 0x00000000
-#define IFX_SSC_STATE_hwmask    0x771F3F84
-#define IFX_SSC_STATE_dontcare (IFX_SSC_STATE_readmask & IFX_SSC_STATE_writemask & ~IFX_SSC_STATE_hwmask)
-
-/* address of the Write Hardware Modified Control Register Bits of the SSC */
-#define IFX_SSC_WHBSTATE            0x00000018
-/* IFX_SSC_WHBSTATE register is write only */
-#define IFX_SSC_WHBSTATE_readmask  0x00000000
-#define IFX_SSC_WHBSTATE_writemask 0x0000FFFF
-#define IFX_SSC_WHBSTATE_hwmask    0x00000000
-#define IFX_SSC_WHBSTATE_dontcare (IFX_SSC_WHBSTATE_readmask & IFX_SSC_WHBSTATE_writemask & ~IFX_SSC_WHBSTATE_hwmask)
-
-/* address of the Baudrate Timer Reload Register of the SSC */
-#define IFX_SSC_BR              0x00000040
-/* IFX_SSC_BR register is significant in  bit 15 downto 0*/
-#define IFX_SSC_BR_readmask  0x0000FFFF
-#define IFX_SSC_BR_writemask 0x0000FFFF
-#define IFX_SSC_BR_hwmask    0x00000000
-#define IFX_SSC_BR_dontcare (IFX_SSC_BR_readmask & IFX_SSC_BR_writemask & ~IFX_SSC_BR_hwmask)
-
-/* address of the Baudrate Timer Status Register of the SSC */
-#define IFX_SSC_BRSTAT              0x00000044
-/* IFX_SSC_BRSTAT register is significant in  bit 15 downto 0*/
-#define IFX_SSC_BRSTAT_readmask  0x0000FFFF
-#define IFX_SSC_BRSTAT_writemask 0x00000000
-#define IFX_SSC_BRSTAT_hwmask    0x0000FFFF
-#define IFX_SSC_BRSTAT_dontcare (IFX_SSC_BRSTAT_readmask & IFX_SSC_BRSTAT_writemask & ~IFX_SSC_BRSTAT_hwmask)
-
-/* address of the Transmitter Buffer Register of the SSC */
-#define IFX_SSC_TB              0x00000020
-/* IFX_SSC_TB register is significant in  bit 31 downto 0*/
-#define IFX_SSC_TB_readmask  0xFFFFFFFF
-#define IFX_SSC_TB_writemask 0xFFFFFFFF
-#define IFX_SSC_TB_hwmask    0x00000000
-#define IFX_SSC_TB_dontcare (IFX_SSC_TB_readmask & IFX_SSC_TB_writemask & ~IFX_SSC_TB_hwmask)
-
-/* address of the Reciver Buffer Register of the SSC */
-#define IFX_SSC_RB              0x00000024
-/* IFX_SSC_RB register is significant in no bits*/
-#define IFX_SSC_RB_readmask  0xFFFFFFFF
-#define IFX_SSC_RB_writemask 0x00000000
-#define IFX_SSC_RB_hwmask    0xFFFFFFFF
-#define IFX_SSC_RB_dontcare (IFX_SSC_RB_readmask & IFX_SSC_RB_writemask & ~IFX_SSC_RB_hwmask)
-
-/* address of the Receive FIFO Control Register of the SSC */
-#define IFX_SSC_RXFCON              0x00000030
-/* IFX_SSC_RXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
-#define IFX_SSC_RXFCON_readmask  0x00003F03
-#define IFX_SSC_RXFCON_writemask 0x00003F03
-#define IFX_SSC_RXFCON_hwmask    0x00000000
-#define IFX_SSC_RXFCON_dontcare (IFX_SSC_RXFCON_readmask & IFX_SSC_RXFCON_writemask & ~IFX_SSC_RXFCON_hwmask)
-
-/* address of the Transmit FIFO Control Register of the SSC */
-#define IFX_SSC_TXFCON              0x00000034
-/* IFX_SSC_TXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
-#define IFX_SSC_TXFCON_readmask  0x00003F03
-#define IFX_SSC_TXFCON_writemask 0x00003F03
-#define IFX_SSC_TXFCON_hwmask    0x00000000
-#define IFX_SSC_TXFCON_dontcare (IFX_SSC_TXFCON_readmask & IFX_SSC_TXFCON_writemask & ~IFX_SSC_TXFCON_hwmask)
-
-/* address of the FIFO Status Register of the SSC */
-#define IFX_SSC_FSTAT               0x00000038
-/* IFX_SSC_FSTAT register is significant in no bit*/
-#define IFX_SSC_FSTAT_readmask  0x00003F3F
-#define IFX_SSC_FSTAT_writemask 0x00000000
-#define IFX_SSC_FSTAT_hwmask    0x00003F3F
-#define IFX_SSC_FSTAT_dontcare (IFX_SSC_FSTAT_readmask & IFX_SSC_FSTAT_writemask & ~IFX_SSC_FSTAT_hwmask)
-
-/* address of the Data Frame Control register of the SSC */
-#define IFX_SSC_SFCON               0x00000060
-#define IFX_SSC_SFCON_readmask  0xFFDFFFFD
-#define IFX_SSC_SFCON_writemask 0xFFDFFFFD
-#define IFX_SSC_SFCON_hwmask    0x00000000
-#define IFX_SSC_SFCON_dontcare (IFX_SSC_SFCON_readmask & IFX_SSC_SFCON_writemask & ~IFX_SSC_SFCON_hwmask)
-
-/* address of the Data Frame Status register of the SSC */
-#define IFX_SSC_SFSTAT               0x00000064
-#define IFX_SSC_SFSTAT_readmask  0xFFC0FFF3
-#define IFX_SSC_SFSTAT_writemask 0x00000000
-#define IFX_SSC_SFSTAT_hwmask    0xFFC0FFF3
-#define IFX_SSC_SFSTAT_dontcare (IFX_SSC_SFSTAT_readmask & IFX_SSC_SFSTAT_writemask & ~IFX_SSC_SFSTAT_hwmask)
-
-/* address of the General Purpose Output Control register of the SSC */
-#define IFX_SSC_GPOCON               0x00000070
-#define IFX_SSC_GPOCON_readmask  0x0000FFFF
-#define IFX_SSC_GPOCON_writemask 0x0000FFFF
-#define IFX_SSC_GPOCON_hwmask    0x00000000
-#define IFX_SSC_GPOCON_dontcare (IFX_SSC_GPOCON_readmask & IFX_SSC_GPOCON_writemask & ~IFX_SSC_GPOCON_hwmask)
-
-/* address of the General Purpose Output Status register of the SSC */
-#define IFX_SSC_GPOSTAT               0x00000074
-#define IFX_SSC_GPOSTAT_readmask  0x000000FF
-#define IFX_SSC_GPOSTAT_writemask 0x00000000
-#define IFX_SSC_GPOSTAT_hwmask    0x00000000
-#define IFX_SSC_GPOSTAT_dontcare (IFX_SSC_GPOSTAT_readmask & IFX_SSC_GPOSTAT_writemask & ~IFX_SSC_GPOSTAT_hwmask)
-
-/* address of the Force GPO Status register of the SSC */
-#define IFX_SSC_WHBGPOSTAT               0x00000078
-#define IFX_SSC_WHBGPOSTAT_readmask  0x00000000
-#define IFX_SSC_WHBGPOSTAT_writemask 0x0000FFFF
-#define IFX_SSC_WHBGPOSTAT_hwmask    0x00000000
-#define IFX_SSC_WHBGPOSTAT_dontcare (IFX_SSC_WHBGPOSTAT_readmask & IFX_SSC_WHBGPOSTAT_writemask & ~IFX_SSC_WHBGPOSTAT_hwmask)
-
-/* address of the Receive Request Register of the SSC */
-#define IFX_SSC_RXREQ               0x00000080
-#define IFX_SSC_RXREQ_readmask  0x0000FFFF
-#define IFX_SSC_RXREQ_writemask 0x0000FFFF
-#define IFX_SSC_RXREQ_hwmask    0x00000000
-#define IFX_SSC_RXREQ_dontcare (IFX_SSC_RXREQ_readmask & IFX_SSC_RXREQ_writemask & ~IFX_SSC_RXREQ_hwmask)
-
-/* address of the Receive Count Register of the SSC */
-#define IFX_SSC_RXCNT               0x00000084
-#define IFX_SSC_RXCNT_readmask  0x0000FFFF
-#define IFX_SSC_RXCNT_writemask 0x00000000
-#define IFX_SSC_RXCNT_hwmask    0x0000FFFF
-#define IFX_SSC_RXCNT_dontcare (IFX_SSC_RXCNT_readmask & IFX_SSC_RXCNT_writemask & ~IFX_SSC_RXCNT_hwmask)
-
-/* address of the DMA Configuration Register of the SSC */
-#define IFX_SSC_DMACON               0x000000EC
-#define IFX_SSC_DMACON_readmask  0x0000FFFF
-#define IFX_SSC_DMACON_writemask 0x00000000
-#define IFX_SSC_DMACON_hwmask    0x0000FFFF
-#define IFX_SSC_DMACON_dontcare (IFX_SSC_DMACON_readmask & IFX_SSC_DMACON_writemask & ~IFX_SSC_DMACON_hwmask)
-
-//------------------------------------------------------
-// interrupt register for enabling interrupts, mask register of irq_reg
-#define IFX_SSC_IRN_EN 0xF4
-// read/write
-#define IFX_SSC_IRN_EN_readmask  0x0000000F
-#define IFX_SSC_IRN_EN_writemask 0x0000000F
-#define IFX_SSC_IRN_EN_hwmask    0x00000000
-#define IFX_SSC_IRN_EN_dontcare  (IFX_SSC_IRN_EN_readmask & IFX_SSC_IRN_EN_writemask & ~IFX_SSC_IRN_EN_hwmask)
-
-// interrupt register for accessing interrupts
-#define IFX_SSC_IRN_CR                0xF8
-// read/write
-#define IFX_SSC_IRN_CR_readmask  0x0000000F
-#define IFX_SSC_IRN_CR_writemask 0x0000000F
-#define IFX_SSC_IRN_CR_hwmask    0x0000000F
-#define IFX_SSC_IRN_CR_dontcare  (IFX_SSC_IRN_CR_readmask & IFX_SSC_IRN_CR_writemask & ~IFX_SSC_IRN_CR_hwmask)
-
-// interrupt register for stimulating interrupts
-#define IFX_SSC_IRN_ICR                  0xFC
-// read/write
-#define IFX_SSC_IRN_ICR_readmask  0x0000000F
-#define IFX_SSC_IRN_ICR_writemask 0x0000000F
-#define IFX_SSC_IRN_ICR_hwmask    0x00000000
-#define IFX_SSC_IRN_ICR_dontcare  (IFX_SSC_IRN_ICR_readmask & IFX_SSC_IRN_ICR_writemask & ~IFX_SSC_IRN_ICR_hwmask)
-
-//---------------------------------------------------------------------
-// Number of IRQs and bitposition of IRQ
-#define IFX_SSC_NUM_IRQ           4
-#define IFX_SSC_T_BIT       0x00000001
-#define IFX_SSC_R_BIT       0x00000002
-#define IFX_SSC_E_BIT       0x00000004
-#define IFX_SSC_F_BIT       0x00000008
-
-/* bit masks for SSC registers */
-
-/* ID register */
-#define IFX_SSC_PERID_REV_MASK      0x0000001F
-#define IFX_SSC_PERID_CFG_MASK      0x00000020
-#define IFX_SSC_PERID_ID_MASK       0x0000FF00
-#define IFX_SSC_PERID_REV_OFFSET    0
-#define IFX_SSC_PERID_CFG_OFFSET    5
-#define IFX_SSC_PERID_ID_OFFSET     8
-#define IFX_SSC_PERID_ID            0x45
-#define IFX_SSC_PERID_DMA_ON        0x00000020
-#define IFX_SSC_PERID_RXFS_MASK     0x003F0000
-#define IFX_SSC_PERID_RXFS_OFFSET   16
-#define IFX_SSC_PERID_TXFS_MASK     0x3F000000
-#define IFX_SSC_PERID_TXFS_OFFSET   24
-
-/* PISEL register */
-#define IFX_SSC_PISEL_MASTER_IN_A       0x0000
-#define IFX_SSC_PISEL_MASTER_IN_B       0x0001
-#define IFX_SSC_PISEL_SLAVE_IN_A        0x0000
-#define IFX_SSC_PISEL_SLAVE_IN_B        0x0002
-#define IFX_SSC_PISEL_CLOCK_IN_A        0x0000
-#define IFX_SSC_PISEL_CLOCK_IN_B        0x0004
-
-/* IFX_SSC_CON register */
-#define IFX_SSC_CON_ECHO_MODE_ON       0x01000000
-#define IFX_SSC_CON_ECHO_MODE_OFF      0x00000000
-#define IFX_SSC_CON_IDLE_HIGH          0x00800000
-#define IFX_SSC_CON_IDLE_LOW           0x00000000
-#define IFX_SSC_CON_ENABLE_BYTE_VALID  0x00400000
-#define IFX_SSC_CON_DISABLE_BYTE_VALID 0x00000000
-#define IFX_SSC_CON_DATA_WIDTH_OFFSET  16
-#define IFX_SSC_CON_DATA_WIDTH_MASK    0x001F0000
-#define IFX_SSC_ENCODE_DATA_WIDTH(width) (((width - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET) & IFX_SSC_CON_DATA_WIDTH_MASK)
-
-#define IFX_SSC_CON_RESET_ON_BAUDERR   0x00002000
-#define IFX_SSC_CON_GO_ON_ON_BAUDERR   0x00000000
-
-#define IFX_SSC_CON_RX_UFL_CHECK       0x00001000
-#define IFX_SSC_CON_RX_UFL_IGNORE      0x00000000
-#define IFX_SSC_CON_TX_UFL_CHECK       0x00000800
-#define IFX_SSC_CON_TX_UFL_IGNORE      0x00000000
-#define IFX_SSC_CON_ABORT_ERR_CHECK    0x00000400
-#define IFX_SSC_CON_ABORT_ERR_IGNORE   0x00000000
-#define IFX_SSC_CON_RX_OFL_CHECK       0x00000200
-#define IFX_SSC_CON_RX_OFL_IGNORE      0x00000000
-#define IFX_SSC_CON_TX_OFL_CHECK       0x00000100
-#define IFX_SSC_CON_TX_OFL_IGNORE      0x00000000
-#define IFX_SSC_CON_ALL_ERR_CHECK      0x00001F00
-#define IFX_SSC_CON_ALL_ERR_IGNORE     0x00000000
-
-#define IFX_SSC_CON_LOOPBACK_MODE      0x00000080
-#define IFX_SSC_CON_NO_LOOPBACK        0x00000000
-#define IFX_SSC_CON_HALF_DUPLEX        0x00000080
-#define IFX_SSC_CON_FULL_DUPLEX        0x00000000
-#define IFX_SSC_CON_CLOCK_FALL         0x00000040
-#define IFX_SSC_CON_CLOCK_RISE         0x00000000
-#define IFX_SSC_CON_SHIFT_THEN_LATCH   0x00000000
-#define IFX_SSC_CON_LATCH_THEN_SHIFT   0x00000020
-#define IFX_SSC_CON_MSB_FIRST          0x00000010
-#define IFX_SSC_CON_LSB_FIRST          0x00000000
-#define IFX_SSC_CON_ENABLE_CSB         0x00000008
-#define IFX_SSC_CON_DISABLE_CSB        0x00000000
-#define IFX_SSC_CON_INVERT_CSB         0x00000004
-#define IFX_SSC_CON_TRUE_CSB           0x00000000
-#define IFX_SSC_CON_RX_OFF             0x00000002
-#define IFX_SSC_CON_RX_ON              0x00000000
-#define IFX_SSC_CON_TX_OFF             0x00000001
-#define IFX_SSC_CON_TX_ON              0x00000000
-
-/* IFX_SSC_STATE register */
-#define IFX_SSC_STATE_RX_BYTE_VALID_OFFSET 28
-#define IFX_SSC_STATE_RX_BYTE_VALID_MASK   0x70000000
-#define IFX_SSC_DECODE_RX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET)
-#define IFX_SSC_STATE_TX_BYTE_VALID_OFFSET 24
-#define IFX_SSC_STATE_TX_BYTE_VALID_MASK   0x07000000
-#define IFX_SSC_DECODE_TX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_TX_BYTE_VALID_MASK) >> IFX_SSC_STATE_TX_BYTE_VALID_OFFSET)
-#define IFX_SSC_STATE_BIT_COUNT_OFFSET     16
-#define IFX_SSC_STATE_BIT_COUNT_MASK       0x001F0000
-#define IFX_SSC_DECODE_DATA_WIDTH(con_state) (((con_state & IFX_SSC_STATE_BIT_COUNT_MASK) >> IFX_SSC_STATE_BIT_COUNT_OFFSET) + 1)
-#define IFX_SSC_STATE_BUSY                 0x00002000
-#define IFX_SSC_STATE_RX_UFL               0x00001000
-#define IFX_SSC_STATE_TX_UFL               0x00000800
-#define IFX_SSC_STATE_ABORT_ERR            0x00000400
-#define IFX_SSC_STATE_RX_OFL               0x00000200
-#define IFX_SSC_STATE_TX_OFL               0x00000100
-#define IFX_SSC_STATE_MODE_ERR             0x00000080
-#define IFX_SSC_STATE_SLAVE_IS_SELECTED    0x00000004
-#define IFX_SSC_STATE_IS_MASTER            0x00000002
-#define IFX_SSC_STATE_IS_ENABLED           0x00000001
-
-/* WHBSTATE register */
-#define IFX_SSC_WHBSTATE_DISABLE_SSC        0x0001
-#define IFX_SSC_WHBSTATE_CONFIGURATION_MODE 0x0001
-#define IFX_SSC_WHBSTATE_CLR_ENABLE         0x0001
-
-#define IFX_SSC_WHBSTATE_ENABLE_SSC         0x0002
-#define IFX_SSC_WHBSTATE_RUN_MODE           0x0002
-#define IFX_SSC_WHBSTATE_SET_ENABLE         0x0002
-
-#define IFX_SSC_WHBSTATE_SLAVE_MODE         0x0004
-#define IFX_SSC_WHBSTATE_CLR_MASTER_SELECT  0x0004
-
-#define IFX_SSC_WHBSTATE_MASTER_MODE        0x0008
-#define IFX_SSC_WHBSTATE_SET_MASTER_SELECT  0x0008
-
-#define IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR   0x0010
-#define IFX_SSC_WHBSTATE_SET_RX_UFL_ERROR   0x0020
-
-#define IFX_SSC_WHBSTATE_CLR_MODE_ERROR     0x0040
-#define IFX_SSC_WHBSTATE_SET_MODE_ERROR     0x0080
-
-#define IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR   0x0100
-#define IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR   0x0200
-#define IFX_SSC_WHBSTATE_CLR_ABORT_ERROR    0x0400
-#define IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR   0x0800
-#define IFX_SSC_WHBSTATE_SET_TX_OFL_ERROR   0x1000
-#define IFX_SSC_WHBSTATE_SET_RX_OFL_ERROR   0x2000
-#define IFX_SSC_WHBSTATE_SET_ABORT_ERROR    0x4000
-#define IFX_SSC_WHBSTATE_SET_TX_UFL_ERROR   0x8000
-#define IFX_SSC_WHBSTATE_CLR_ALL_ERROR      0x0F50
-#define IFX_SSC_WHBSTATE_SET_ALL_ERROR      0xF0A0
-
-/* BR register */
-#define IFX_SSC_BR_BAUDRATE_OFFSET      0
-#define IFX_SSC_BR_BAUDRATE_MASK        0xFFFF
-
-/* BR_STAT register */
-#define IFX_SSC_BRSTAT_BAUDTIMER_OFFSET      0
-#define IFX_SSC_BRSTAT_BAUDTIMER_MASK        0xFFFF
-
-/* TB register */
-#define IFX_SSC_TB_DATA_OFFSET      0
-#define IFX_SSC_TB_DATA_MASK        0xFFFFFFFF
-
-/* RB register */
-#define IFX_SSC_RB_DATA_OFFSET      0
-#define IFX_SSC_RB_DATA_MASK        0xFFFFFFFF
-
-/* RXFCON and TXFCON registers */
-#define IFX_SSC_XFCON_FIFO_DISABLE      0x0000
-#define IFX_SSC_XFCON_FIFO_ENABLE       0x0001
-#define IFX_SSC_XFCON_FIFO_FLUSH        0x0002
-#define IFX_SSC_XFCON_ITL_MASK          0x00003F00
-#define IFX_SSC_XFCON_ITL_OFFSET        8
-
-/* FSTAT register */
-#define IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET  0
-#define IFX_SSC_FSTAT_RECEIVED_WORDS_MASK    0x003F
-#define IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET  8
-#define IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK    0x3F00
-
-/* GPOCON register */
-#define IFX_SSC_GPOCON_INVOUT0_POS      0
-#define IFX_SSC_GPOCON_INV_OUT0         0x00000001
-#define IFX_SSC_GPOCON_TRUE_OUT0        0x00000000
-#define IFX_SSC_GPOCON_INVOUT1_POS      1
-#define IFX_SSC_GPOCON_INV_OUT1         0x00000002
-#define IFX_SSC_GPOCON_TRUE_OUT1        0x00000000
-#define IFX_SSC_GPOCON_INVOUT2_POS      2
-#define IFX_SSC_GPOCON_INV_OUT2         0x00000003
-#define IFX_SSC_GPOCON_TRUE_OUT2        0x00000000
-#define IFX_SSC_GPOCON_INVOUT3_POS      3
-#define IFX_SSC_GPOCON_INV_OUT3         0x00000008
-#define IFX_SSC_GPOCON_TRUE_OUT3        0x00000000
-#define IFX_SSC_GPOCON_INVOUT4_POS      4
-#define IFX_SSC_GPOCON_INV_OUT4         0x00000010
-#define IFX_SSC_GPOCON_TRUE_OUT4        0x00000000
-#define IFX_SSC_GPOCON_INVOUT5_POS      5
-#define IFX_SSC_GPOCON_INV_OUT5         0x00000020
-#define IFX_SSC_GPOCON_TRUE_OUT5        0x00000000
-#define IFX_SSC_GPOCON_INVOUT6_POS      6
-#define IFX_SSC_GPOCON_INV_OUT6         0x00000040
-#define IFX_SSC_GPOCON_TRUE_OUT6        0x00000000
-#define IFX_SSC_GPOCON_INVOUT7_POS      7
-#define IFX_SSC_GPOCON_INV_OUT7         0x00000080
-#define IFX_SSC_GPOCON_TRUE_OUT7        0x00000000
-#define IFX_SSC_GPOCON_INV_OUT_ALL      0x000000FF
-#define IFX_SSC_GPOCON_TRUE_OUT_ALL     0x00000000
-
-#define IFX_SSC_GPOCON_ISCSB0_POS       8
-#define IFX_SSC_GPOCON_IS_CSB0          0x00000100
-#define IFX_SSC_GPOCON_IS_GPO0          0x00000000
-#define IFX_SSC_GPOCON_ISCSB1_POS       9
-#define IFX_SSC_GPOCON_IS_CSB1          0x00000200
-#define IFX_SSC_GPOCON_IS_GPO1          0x00000000
-#define IFX_SSC_GPOCON_ISCSB2_POS       10
-#define IFX_SSC_GPOCON_IS_CSB2          0x00000400
-#define IFX_SSC_GPOCON_IS_GPO2          0x00000000
-#define IFX_SSC_GPOCON_ISCSB3_POS       11
-#define IFX_SSC_GPOCON_IS_CSB3          0x00000800
-#define IFX_SSC_GPOCON_IS_GPO3          0x00000000
-#define IFX_SSC_GPOCON_ISCSB4_POS       12
-#define IFX_SSC_GPOCON_IS_CSB4          0x00001000
-#define IFX_SSC_GPOCON_IS_GPO4          0x00000000
-#define IFX_SSC_GPOCON_ISCSB5_POS       13
-#define IFX_SSC_GPOCON_IS_CSB5          0x00002000
-#define IFX_SSC_GPOCON_IS_GPO5          0x00000000
-#define IFX_SSC_GPOCON_ISCSB6_POS       14
-#define IFX_SSC_GPOCON_IS_CSB6          0x00004000
-#define IFX_SSC_GPOCON_IS_GPO6          0x00000000
-#define IFX_SSC_GPOCON_ISCSB7_POS       15
-#define IFX_SSC_GPOCON_IS_CSB7          0x00008000
-#define IFX_SSC_GPOCON_IS_GPO7          0x00000000
-#define IFX_SSC_GPOCON_IS_CSB_ALL       0x0000FF00
-#define IFX_SSC_GPOCON_IS_GPO_ALL       0x00000000
-
-/* GPOSTAT register */
-#define IFX_SSC_GPOSTAT_OUT0            0x00000001
-#define IFX_SSC_GPOSTAT_OUT1            0x00000002
-#define IFX_SSC_GPOSTAT_OUT2            0x00000004
-#define IFX_SSC_GPOSTAT_OUT3            0x00000008
-#define IFX_SSC_GPOSTAT_OUT4            0x00000010
-#define IFX_SSC_GPOSTAT_OUT5            0x00000020
-#define IFX_SSC_GPOSTAT_OUT6            0x00000040
-#define IFX_SSC_GPOSTAT_OUT7            0x00000080
-#define IFX_SSC_GPOSTAT_OUT_ALL         0x000000FF
-
-/* WHBGPOSTAT register */
-#define IFX_SSC_WHBGPOSTAT_CLROUT0_POS  0
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT0     0x00000001
-#define IFX_SSC_WHBGPOSTAT_CLROUT1_POS  1
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT1     0x00000002
-#define IFX_SSC_WHBGPOSTAT_CLROUT2_POS  2
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT2     0x00000004
-#define IFX_SSC_WHBGPOSTAT_CLROUT3_POS  3
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT3     0x00000008
-#define IFX_SSC_WHBGPOSTAT_CLROUT4_POS  4
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT4     0x00000010
-#define IFX_SSC_WHBGPOSTAT_CLROUT5_POS  5
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT5     0x00000020
-#define IFX_SSC_WHBGPOSTAT_CLROUT6_POS  6
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT6     0x00000040
-#define IFX_SSC_WHBGPOSTAT_CLROUT7_POS  7
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT7     0x00000080
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT_ALL  0x000000FF
-
-#define IFX_SSC_WHBGPOSTAT_OUT0_POS  0
-#define IFX_SSC_WHBGPOSTAT_OUT1_POS  1
-#define IFX_SSC_WHBGPOSTAT_OUT2_POS  2
-#define IFX_SSC_WHBGPOSTAT_OUT3_POS  3
-#define IFX_SSC_WHBGPOSTAT_OUT4_POS  4
-#define IFX_SSC_WHBGPOSTAT_OUT5_POS  5
-#define IFX_SSC_WHBGPOSTAT_OUT6_POS  6
-#define IFX_SSC_WHBGPOSTAT_OUT7_POS  7
-
-#define IFX_SSC_WHBGPOSTAT_SETOUT0_POS  8
-#define IFX_SSC_WHBGPOSTAT_SET_OUT0     0x00000100
-#define IFX_SSC_WHBGPOSTAT_SETOUT1_POS  9
-#define IFX_SSC_WHBGPOSTAT_SET_OUT1     0x00000200
-#define IFX_SSC_WHBGPOSTAT_SETOUT2_POS  10
-#define IFX_SSC_WHBGPOSTAT_SET_OUT2     0x00000400
-#define IFX_SSC_WHBGPOSTAT_SETOUT3_POS  11
-#define IFX_SSC_WHBGPOSTAT_SET_OUT3     0x00000800
-#define IFX_SSC_WHBGPOSTAT_SETOUT4_POS  12
-#define IFX_SSC_WHBGPOSTAT_SET_OUT4     0x00001000
-#define IFX_SSC_WHBGPOSTAT_SETOUT5_POS  13
-#define IFX_SSC_WHBGPOSTAT_SET_OUT5     0x00002000
-#define IFX_SSC_WHBGPOSTAT_SETOUT6_POS  14
-#define IFX_SSC_WHBGPOSTAT_SET_OUT6     0x00004000
-#define IFX_SSC_WHBGPOSTAT_SETOUT7_POS  15
-#define IFX_SSC_WHBGPOSTAT_SET_OUT7     0x00008000
-#define IFX_SSC_WHBGPOSTAT_SET_OUT_ALL  0x0000FF00
-
-/* SFCON register */
-#define IFX_SSC_SFCON_SF_ENABLE                0x00000001
-#define IFX_SSC_SFCON_SF_DISABLE               0x00000000
-#define IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE  0x00000004
-#define IFX_SSC_SFCON_FIR_DISABLE_BEFORE_PAUSE 0x00000000
-#define IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE   0x00000008
-#define IFX_SSC_SFCON_FIR_DISABLE_AFTER_PAUSE  0x00000000
-#define IFX_SSC_SFCON_DATA_LENGTH_MASK         0x0000FFF0
-#define IFX_SSC_SFCON_DATA_LENGTH_OFFSET       4
-#define IFX_SSC_SFCON_PAUSE_DATA_MASK          0x00030000
-#define IFX_SSC_SFCON_PAUSE_DATA_OFFSET        16
-#define IFX_SSC_SFCON_PAUSE_DATA_0             0x00000000
-#define IFX_SSC_SFCON_PAUSE_DATA_1             0x00010000
-#define IFX_SSC_SFCON_PAUSE_DATA_IDLE          0x00020000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_MASK         0x000C0000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET       18
-#define IFX_SSC_SFCON_PAUSE_CLOCK_0            0x00000000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_1            0x00040000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_IDLE         0x00080000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_RUN          0x000C0000
-#define IFX_SSC_SFCON_STOP_AFTER_PAUSE         0x00100000
-#define IFX_SSC_SFCON_CONTINUE_AFTER_PAUSE     0x00000000
-#define IFX_SSC_SFCON_PAUSE_LENGTH_MASK        0xFFC00000
-#define IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET      22
-#define IFX_SSC_SFCON_DATA_LENGTH_MAX         4096
-#define IFX_SSC_SFCON_PAUSE_LENGTH_MAX        1024
-
-#define IFX_SSC_SFCON_EXTRACT_DATA_LENGTH(sfcon)  ((sfcon & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET)
-#define IFX_SSC_SFCON_EXTRACT_PAUSE_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET)
-#define IFX_SSC_SFCON_SET_DATA_LENGTH(value)      ((value << IFX_SSC_SFCON_DATA_LENGTH_OFFSET) & IFX_SSC_SFCON_DATA_LENGTH_MASK)
-#define IFX_SSC_SFCON_SET_PAUSE_LENGTH(value)      ((value << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) & IFX_SSC_SFCON_PAUSE_LENGTH_MASK)
-
-/* SFSTAT register */
-#define IFX_SSC_SFSTAT_IN_DATA            0x00000001
-#define IFX_SSC_SFSTAT_IN_PAUSE           0x00000002
-#define IFX_SSC_SFSTAT_DATA_COUNT_MASK    0x0000FFF0
-#define IFX_SSC_SFSTAT_DATA_COUNT_OFFSET  4
-#define IFX_SSC_SFSTAT_PAUSE_COUNT_MASK   0xFFF00000
-#define IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET 20
-
-#define IFX_SSC_SFSTAT_EXTRACT_DATA_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET)
-#define IFX_SSC_SFSTAT_EXTRACT_PAUSE_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET)
-
-/* RXREQ register */
-#define IFX_SSC_RXREQ_RXCOUNT_MASK       0x0000FFFF
-#define IFX_SSC_RXREQ_RXCOUNT_OFFSET     0
-
-/* RXCNT register */
-#define IFX_SSC_RXCNT_TODO_MASK       0x0000FFFF
-#define IFX_SSC_RXCNT_TODO_OFFSET     0
-
-/* DMACON register */
-#define IFX_SSC_DMACON_RXON           0x00000001
-#define IFX_SSC_DMACON_RXOFF          0x00000000
-#define IFX_SSC_DMACON_TXON           0x00000002
-#define IFX_SSC_DMACON_TXOFF          0x00000000
-#define IFX_SSC_DMACON_DMAON          0x00000003
-#define IFX_SSC_DMACON_DMAOFF         0x00000000
-#define IFX_SSC_DMACON_CLASS_MASK     0x0000000C
-#define IFX_SSC_DMACON_CLASS_OFFSET   2
-
-/* register access macros */
-#define ifx_ssc_fstat_received_words(status)    (status & 0x003F)
-#define ifx_ssc_fstat_words_to_transmit(status) ((status & 0x3F00) >> 8)
-
-#define ifx_ssc_change_status(data, addr)  WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_WHBSTATE))
-#define ifx_ssc_set_config(data, addr)     WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_CON))
-#define ifx_ssc_get_config(addr)           READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_CON))
-#define ifx_ssc_get_status(addr)           READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_STATE))
-#define ifx_ssc_receive(addr)              READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_RB))
-#define ifx_ssc_transmit(data, addr)       WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_TB))
-#define ifx_ssc_fifo_status(addr)          READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_FSTAT))
-#define ifx_ssc_set_baudrate(data, addr)   WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_BR))
-
-#define ifx_ssc_extract_rx_fifo_size(id)   ((id & IFX_SSC_PERID_RXFS_MASK) >> IFX_SSC_PERID_RXFS_OFFSET)
-#define ifx_ssc_extract_tx_fifo_size(id)   ((id & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET)
-
-#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips.h
deleted file mode 100644 (file)
index c8cf0ae..0000000
+++ /dev/null
@@ -1,516 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- *   Copyright (C) 2005 infineon
- *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-#ifndef _IFXMIPS_H__
-#define _IFXMIPS_H__
-
-#define ifxmips_r32(reg)                       __raw_readl(reg)
-#define ifxmips_w32(val, reg)                  __raw_writel(val, reg)
-#define ifxmips_w32_mask(clear, set, reg)      ifxmips_w32((ifxmips_r32(reg) & ~clear) | set, reg)
-
-/*------------ GENERAL */
-
-#define BOARD_SYSTEM_TYPE              "IFXMIPS"
-
-#define IOPORT_RESOURCE_START          0x10000000
-#define IOPORT_RESOURCE_END            0xffffffff
-#define IOMEM_RESOURCE_START           0x10000000
-#define IOMEM_RESOURCE_END             0xffffffff
-
-#define IFXMIPS_FLASH_START            0x10000000
-#define IFXMIPS_FLASH_MAX              0x02000000
-
-/*------------ ASC0/1 */
-
-#define IFXMIPS_ASC_BASE_ADDR          (KSEG1 + 0x1E100400)
-#define IFXMIPS_ASC_BASE_DIFF          (0x1E100C00 - 0x1E100400)
-
-#define IFXMIPS_ASC_FSTAT              0x0048
-#define IFXMIPS_ASC_TBUF               0x0020
-#define IFXMIPS_ASC_WHBSTATE           0x0018
-#define IFXMIPS_ASC_RBUF               0x0024
-#define IFXMIPS_ASC_STATE              0x0014
-#define IFXMIPS_ASC_IRNCR              0x00F8
-#define IFXMIPS_ASC_CLC                        0x0000
-#define IFXMIPS_ASC_PISEL              0x0004
-#define IFXMIPS_ASC_TXFCON             0x0044
-#define IFXMIPS_ASC_RXFCON             0x0040
-#define IFXMIPS_ASC_CON                        0x0010
-#define IFXMIPS_ASC_BG                 0x0050
-#define IFXMIPS_ASC_IRNREN             0x00F4
-
-#define IFXMIPS_ASC_CLC_DISS           0x2
-#define ASC_IRNREN_RX_BUF              0x8
-#define ASC_IRNREN_TX_BUF              0x4
-#define ASC_IRNREN_ERR                 0x2
-#define ASC_IRNREN_TX                  0x1
-#define ASC_IRNCR_TIR                  0x4
-#define ASC_IRNCR_RIR                  0x2
-#define ASC_IRNCR_EIR                  0x4
-#define ASCOPT_CSIZE                   0x3
-#define ASCOPT_CS7                     0x1
-#define ASCOPT_CS8                     0x2
-#define ASCOPT_PARENB                  0x4
-#define ASCOPT_STOPB                   0x8
-#define ASCOPT_PARODD                  0x0
-#define ASCOPT_CREAD                   0x20
-#define TXFIFO_FL                      1
-#define RXFIFO_FL                      1
-#define TXFIFO_FULL                    16
-#define ASCCLC_RMCMASK                 0x0000FF00
-#define ASCCLC_RMCOFFSET               8
-#define ASCCON_M_8ASYNC                        0x0
-#define ASCCON_M_7ASYNC                        0x2
-#define ASCCON_ODD                     0x00000020
-#define ASCCON_STP                     0x00000080
-#define ASCCON_BRS                     0x00000100
-#define ASCCON_FDE                     0x00000200
-#define ASCCON_R                       0x00008000
-#define ASCCON_FEN                     0x00020000
-#define ASCCON_ROEN                    0x00080000
-#define ASCCON_TOEN                    0x00100000
-#define ASCSTATE_PE                    0x00010000
-#define ASCSTATE_FE                    0x00020000
-#define ASCSTATE_ROE                   0x00080000
-#define ASCSTATE_ANY                   (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE)
-#define ASCWHBSTATE_CLRREN             0x00000001
-#define ASCWHBSTATE_SETREN             0x00000002
-#define ASCWHBSTATE_CLRPE              0x00000004
-#define ASCWHBSTATE_CLRFE              0x00000008
-#define ASCWHBSTATE_CLRROE             0x00000020
-#define ASCTXFCON_TXFEN                        0x0001
-#define ASCTXFCON_TXFFLU               0x0002
-#define ASCTXFCON_TXFITLMASK           0x3F00
-#define ASCTXFCON_TXFITLOFF            8
-#define ASCRXFCON_RXFEN                        0x0001
-#define ASCRXFCON_RXFFLU               0x0002
-#define ASCRXFCON_RXFITLMASK           0x3F00
-#define ASCRXFCON_RXFITLOFF            8
-#define ASCFSTAT_RXFFLMASK             0x003F
-#define ASCFSTAT_TXFFLMASK             0x3F00
-#define ASCFSTAT_TXFFLOFF              8
-
-
-
-/*------------ RCU */
-#define IFXMIPS_RCU_BASE_ADDR          0xBF203000
-
-/* reset request */
-#define IFXMIPS_RCU_RST                        ((u32 *)(IFXMIPS_RCU_BASE_ADDR + 0x0010))
-#define IFXMIPS_RCU_RST_CPU1           (1 << 3)
-#define IFXMIPS_RCU_RST_ALL            0x40000000
-
-#define IFXMIPS_RCU_RST_REQ_DFE                (1 << 7)
-#define IFXMIPS_RCU_RST_REQ_AFE                (1 << 11)
-#define IFXMIPS_RCU_RST_REQ_ARC_JTAG   (1 << 20)
-
-
-/*------------ GPTU */
-
-#define IFXMIPS_GPTU_BASE_ADDR         0xB8000300
-
-/* clock control register */
-#define IFXMIPS_GPTU_GPT_CLC           ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0000))
-
-/* captur reload register */
-#define IFXMIPS_GPTU_GPT_CAPREL                ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0030))
-
-/* timer 6 control register */
-#define IFXMIPS_GPTU_GPT_T6CON         ((u32 *)(IFXMIPS_GPTU_BASE_ADDR + 0x0020))
-
-
-/*------------ EBU */
-
-#define IFXMIPS_EBU_BASE_ADDR          0xBE105300
-
-/* bus configuration register */
-#define IFXMIPS_EBU_BUSCON0            ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x0060))
-#define IFXMIPS_EBU_PCC_CON            ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x0090))
-#define IFXMIPS_EBU_PCC_IEN            ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x00A4))
-#define IFXMIPS_EBU_PCC_ISTAT          ((u32 *)(IFXMIPS_EBU_BASE_ADDR + 0x00A0))
-
-
-/*------------ CGU */
-#define IFXMIPS_CGU_BASE_ADDR          (KSEG1 + 0x1F103000)
-#define IFXMIPS_CGU_PLL0_CFG           ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0004))
-#define IFXMIPS_CGU_PLL1_CFG           ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0008))
-#define IFXMIPS_CGU_PLL2_CFG           ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x000C))
-#define IFXMIPS_CGU_SYS                        ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0010))
-#define IFXMIPS_CGU_UPDATE             ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0014))
-#define IFXMIPS_CGU_IF_CLK             ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0018))
-#define IFXMIPS_CGU_OSC_CON            ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x001C))
-#define IFXMIPS_CGU_SMD                        ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0020))
-#define IFXMIPS_CGU_CT1SR              ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0028))
-#define IFXMIPS_CGU_CT2SR              ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x002C))
-#define IFXMIPS_CGU_PCMCR              ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0030))
-#define IFXMIPS_CGU_PCI_CR             ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0034))
-#define IFXMIPS_CGU_PD_PC              ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0038))
-#define IFXMIPS_CGU_FMR                        ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x003C))
-
-/* clock mux */
-#define IFXMIPS_CGU_SYS                        ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0010))
-#define IFXMIPS_CGU_IFCCR              ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0018))
-#define IFXMIPS_CGU_PCICR              ((u32 *)(IFXMIPS_CGU_BASE_ADDR + 0x0034))
-
-#define CLOCK_60M                      60000000
-#define CLOCK_83M                      83333333
-#define CLOCK_111M                     111111111
-#define CLOCK_133M                     133333333
-#define CLOCK_167M                     166666667
-#define CLOCK_333M                     333333333
-
-
-/*------------ CGU */
-
-#define IFXMIPS_PMU_BASE_ADDR          (KSEG1 + 0x1F102000)
-
-#define IFXMIPS_PMU_PWDCR              ((u32 *)(IFXMIPS_PMU_BASE_ADDR + 0x001C))
-#define IFXMIPS_PMU_PWDSR              ((u32 *)(IFXMIPS_PMU_BASE_ADDR + 0x0020))
-
-
-/*------------ ICU */
-
-#define IFXMIPS_ICU_BASE_ADDR          0xBF880200
-
-
-#define IFXMIPS_ICU_IM0_ISR            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0000))
-#define IFXMIPS_ICU_IM0_IER            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0008))
-#define IFXMIPS_ICU_IM0_IOSR           ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0010))
-#define IFXMIPS_ICU_IM0_IRSR           ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0018))
-#define IFXMIPS_ICU_IM0_IMR            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0020))
-
-#define IFXMIPS_ICU_IM1_ISR            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0028))
-#define IFXMIPS_ICU_IM2_IER            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0058))
-#define IFXMIPS_ICU_IM3_IER            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x0080))
-#define IFXMIPS_ICU_IM4_IER            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x00A8))
-#define IFXMIPS_ICU_IM5_IER            ((u32 *)(IFXMIPS_ICU_BASE_ADDR + 0x00D0))
-
-#define IFXMIPS_ICU_OFFSET             (IFXMIPS_ICU_IM1_ISR - IFXMIPS_ICU_IM0_ISR)
-
-
-/*------------ ETOP */
-
-#define IFXMIPS_PPE32_BASE_ADDR                0xBE180000
-
-#define ETHERNET_PACKET_DMA_BUFFER_SIZE                0x600
-
-#define IFXMIPS_PPE32_MEM_MAP          ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x10000))
-#define IFXMIPS_PPE32_SRST             ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x10080))
-
-#define MII_MODE                       1
-#define REV_MII_MODE                   2
-
-/* mdio access */
-#define IFXMIPS_PPE32_MDIO_CFG         ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x11800))
-#define IFXMIPS_PPE32_MDIO_ACC         ((u32 *)(IFXMIPS_PPE32_BASE_ADDR + 0x11804))
-
-#define MDIO_ACC_REQUEST               0x80000000
-#define MDIO_ACC_READ                  0x40000000
-#define MDIO_ACC_ADDR_MASK             0x1f
-#define MDIO_ACC_ADDR_OFFSET           0x15
-#define MDIO_ACC_REG_MASK              0xff
-#define MDIO_ACC_REG_OFFSET            0x10
-#define MDIO_ACC_VAL_MASK              0xffff
-
-/* configuration */
-#define IFXMIPS_PPE32_CFG              ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1808))
-
-#define PPE32_MII_MASK                 0xfffffffc
-#define PPE32_MII_NORMAL               0x8
-#define PPE32_MII_REVERSE              0xe
-
-/* packet length */
-#define IFXMIPS_PPE32_IG_PLEN_CTRL     ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1820))
-
-#define PPE32_PLEN_OVER                        0x5ee
-#define PPE32_PLEN_UNDER               0x400000
-
-/* enet */
-#define IFXMIPS_PPE32_ENET_MAC_CFG     ((u32 *)(IFXMIPS_PPE32_MEM_MAP + 0x1840))
-
-#define PPE32_CGEN                     0x800
-
-
-/*------------ DMA */
-#define IFXMIPS_DMA_BASE_ADDR  0xBE104100
-
-#define IFXMIPS_DMA_CS                 ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x18))
-#define IFXMIPS_DMA_CIE                        ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x2C))
-#define IFXMIPS_DMA_IRNEN              ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0xf4))
-#define IFXMIPS_DMA_CCTRL              ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x1C))
-#define IFXMIPS_DMA_CIS                        ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x28))
-#define IFXMIPS_DMA_CDLEN              ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x24))
-#define IFXMIPS_DMA_PS                 ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x40))
-#define IFXMIPS_DMA_PCTRL              ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x44))
-#define IFXMIPS_DMA_CTRL               ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x10))
-#define IFXMIPS_DMA_CPOLL              ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x14))
-#define IFXMIPS_DMA_CDBA               ((u32 *)(IFXMIPS_DMA_BASE_ADDR + 0x20))
-
-
-/*------------ PCI */
-#define PCI_CR_PR_BASE_ADDR            (KSEG1 + 0x1E105400)
-
-#define PCI_CR_FCI_ADDR_MAP0           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C0))
-#define PCI_CR_FCI_ADDR_MAP1           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C4))
-#define PCI_CR_FCI_ADDR_MAP2           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00C8))
-#define PCI_CR_FCI_ADDR_MAP3           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00CC))
-#define PCI_CR_FCI_ADDR_MAP4           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D0))
-#define PCI_CR_FCI_ADDR_MAP5           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D4))
-#define PCI_CR_FCI_ADDR_MAP6           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00D8))
-#define PCI_CR_FCI_ADDR_MAP7           ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00DC))
-#define PCI_CR_CLK_CTRL                        ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0000))
-#define PCI_CR_PCI_MOD                 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0030))
-#define PCI_CR_PC_ARB                  ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0080))
-#define PCI_CR_FCI_ADDR_MAP11hg                ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00E4))
-#define PCI_CR_BAR11MASK               ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0044))
-#define PCI_CR_BAR12MASK               ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0048))
-#define PCI_CR_BAR13MASK               ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x004C))
-#define PCI_CS_BASE_ADDR1              ((u32 *)(PCI_CS_PR_BASE_ADDR + 0x0010))
-#define PCI_CR_PCI_ADDR_MAP11          ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x0064))
-#define PCI_CR_FCI_BURST_LENGTH                ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x00E8))
-#define PCI_CR_PCI_EOI                 ((u32 *)(PCI_CR_PR_BASE_ADDR + 0x002C))
-
-#define PCI_CS_PR_BASE_ADDR            (KSEG1 + 0x17000000)
-
-#define PCI_CS_STS_CMD                 ((u32 *)(PCI_CS_PR_BASE_ADDR + 0x0004))
-
-#define PCI_MASTER0_REQ_MASK_2BITS     8
-#define PCI_MASTER1_REQ_MASK_2BITS     10
-#define PCI_MASTER2_REQ_MASK_2BITS     12
-#define INTERNAL_ARB_ENABLE_BIT                0
-
-
-/*------------ WDT */
-
-#define IFXMIPS_WDT_BASE_ADDR          (KSEG1 + 0x1F880000)
-
-#define IFXMIPS_BIU_WDT_CR             ((u32 *)(IFXMIPS_WDT_BASE_ADDR + 0x03F0))
-#define IFXMIPS_BIU_WDT_SR             ((u32 *)(IFXMIPS_WDT_BASE_ADDR + 0x03F8))
-
-
-/*------------ LED */
-
-#define IFXMIPS_LED_BASE_ADDR          (KSEG1 + 0x1E100BB0)
-#define IFXMIPS_LED_CON0               ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0000))
-#define IFXMIPS_LED_CON1               ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0004))
-#define IFXMIPS_LED_CPU0               ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0008))
-#define IFXMIPS_LED_CPU1               ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x000C))
-#define IFXMIPS_LED_AR                 ((u32 *)(IFXMIPS_LED_BASE_ADDR + 0x0010))
-
-#define LED_CON0_SWU                   (1 << 31)
-#define LED_CON0_AD1                   (1 << 25)
-#define LED_CON0_AD0                   (1 << 24)
-
-#define IFXMIPS_LED_2HZ                        (0)
-#define IFXMIPS_LED_4HZ                        (1 << 23)
-#define IFXMIPS_LED_8HZ                        (2 << 23)
-#define IFXMIPS_LED_10HZ               (3 << 23)
-#define IFXMIPS_LED_MASK               (0xf << 23)
-
-#define IFXMIPS_LED_UPD_SRC_FPI        (1 << 31)
-#define IFXMIPS_LED_UPD_MASK           (3 << 30)
-#define IFXMIPS_LED_ADSL_SRC           (3 << 24)
-
-#define IFXMIPS_LED_GROUP0             (1 << 0)
-#define IFXMIPS_LED_GROUP1             (1 << 1)
-#define IFXMIPS_LED_GROUP2             (1 << 2)
-
-#define IFXMIPS_LED_RISING             0
-#define IFXMIPS_LED_FALLING            (1 << 26)
-#define IFXMIPS_LED_EDGE_MASK          (1 << 26)
-
-
-/*------------ GPIO */
-
-#define IFXMIPS_GPIO_BASE_ADDR (0xBE100B00)
-
-#define IFXMIPS_GPIO_P0_OUT            ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0010))
-#define IFXMIPS_GPIO_P1_OUT            ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0040))
-#define IFXMIPS_GPIO_P0_IN             ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0014))
-#define IFXMIPS_GPIO_P1_IN             ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0044))
-#define IFXMIPS_GPIO_P0_DIR            ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0018))
-#define IFXMIPS_GPIO_P1_DIR            ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0048))
-#define IFXMIPS_GPIO_P0_ALTSEL0                ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x001C))
-#define IFXMIPS_GPIO_P1_ALTSEL0                ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x004C))
-#define IFXMIPS_GPIO_P0_ALTSEL1                ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0020))
-#define IFXMIPS_GPIO_P1_ALTSEL1                ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0050))
-#define IFXMIPS_GPIO_P0_OD             ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0024))
-#define IFXMIPS_GPIO_P1_OD             ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0054))
-#define IFXMIPS_GPIO_P0_STOFF          ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0028))
-#define IFXMIPS_GPIO_P1_STOFF          ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0058))
-#define IFXMIPS_GPIO_P0_PUDSEL         ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x002C))
-#define IFXMIPS_GPIO_P1_PUDSEL         ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x005C))
-#define IFXMIPS_GPIO_P0_PUDEN          ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0030))
-#define IFXMIPS_GPIO_P1_PUDEN          ((u32 *)(IFXMIPS_GPIO_BASE_ADDR + 0x0060))
-
-
-/*------------ SSC */
-
-#define IFXMIPS_SSC_BASE_ADDR          (KSEG1 + 0x1e100800)
-
-
-#define IFXMIPS_SSC_CLC                        ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0000))
-#define IFXMIPS_SSC_IRN                        ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x00F4))
-#define IFXMIPS_SSC_SFCON              ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0060))
-#define IFXMIPS_SSC_WHBGPOSTAT         ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0078))
-#define IFXMIPS_SSC_STATE              ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0014))
-#define IFXMIPS_SSC_WHBSTATE           ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0018))
-#define IFXMIPS_SSC_FSTAT              ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0038))
-#define IFXMIPS_SSC_ID                 ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0008))
-#define IFXMIPS_SSC_TB                 ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0020))
-#define IFXMIPS_SSC_RXFCON             ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0030))
-#define IFXMIPS_SSC_TXFCON             ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0034))
-#define IFXMIPS_SSC_CON                        ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0010))
-#define IFXMIPS_SSC_GPOSTAT            ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0074))
-#define IFXMIPS_SSC_RB                 ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0024))
-#define IFXMIPS_SSC_RXCNT              ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0084))
-#define IFXMIPS_SSC_GPOCON             ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0070))
-#define IFXMIPS_SSC_BR                 ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0040))
-#define IFXMIPS_SSC_RXREQ              ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0080))
-#define IFXMIPS_SSC_SFSTAT             ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0064))
-#define IFXMIPS_SSC_RXCNT              ((u32 *)(IFXMIPS_SSC_BASE_ADDR + 0x0084))
-
-
-/*------------ MEI */
-
-#define IFXMIPS_MEI_BASE_ADDR          (KSEG1 + 0x1E116000)
-
-#define MEI_DATA_XFR                   ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0000))
-#define MEI_VERSION                    ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0004))
-#define MEI_ARC_GP_STAT                        ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0008))
-#define MEI_DATA_XFR_STAT              ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x000C))
-#define MEI_XFR_ADDR                   ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0010))
-#define MEI_MAX_WAIT                   ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0014))
-#define MEI_TO_ARC_INT                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0018))
-#define ARC_TO_MEI_INT                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x001C))
-#define ARC_TO_MEI_INT_MASK            ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0020))
-#define MEI_DEBUG_WAD                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0024))
-#define MEI_DEBUG_RAD                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0028))
-#define MEI_DEBUG_DATA                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x002C))
-#define MEI_DEBUG_DEC                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0030))
-#define MEI_CONFIG                     ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0034))
-#define MEI_RST_CONTROL                        ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0038))
-#define MEI_DBG_MASTER                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x003C))
-#define MEI_CLK_CONTROL                        ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0040))
-#define MEI_BIST_CONTROL               ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0044))
-#define MEI_BIST_STAT                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0048))
-#define MEI_XDATA_BASE_SH              ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x004c))
-#define MEI_XDATA_BASE                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0050))
-#define MEI_XMEM_BAR_BASE              ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0054))
-#define MEI_XMEM_BAR0                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0054))
-#define MEI_XMEM_BAR1                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0058))
-#define MEI_XMEM_BAR2                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x005C))
-#define MEI_XMEM_BAR3                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0060))
-#define MEI_XMEM_BAR4                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0064))
-#define MEI_XMEM_BAR5                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0068))
-#define MEI_XMEM_BAR6                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x006C))
-#define MEI_XMEM_BAR7                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0070))
-#define MEI_XMEM_BAR8                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0074))
-#define MEI_XMEM_BAR9                  ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0078))
-#define MEI_XMEM_BAR10                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x007C))
-#define MEI_XMEM_BAR11                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0080))
-#define MEI_XMEM_BAR12                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0084))
-#define MEI_XMEM_BAR13                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0088))
-#define MEI_XMEM_BAR14                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x008C))
-#define MEI_XMEM_BAR15                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0090))
-#define MEI_XMEM_BAR16                 ((u32 *)(IFXMIPS_MEI_BASE_ADDR + 0x0094))
-
-
-/*------------ DEU */
-
-#define IFXMIPS_DEU_BASE               (KSEG1 + 0x1E103100)
-#define IFXMIPS_DEU_CLK                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0000))
-#define IFXMIPS_DEU_ID                 ((u32 *)(IFXMIPS_DEU_BASE + 0x0008))
-
-#define IFXMIPS_DES_CON                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0010))
-#define IFXMIPS_DES_IHR                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0014))
-#define IFXMIPS_DES_ILR                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0018))
-#define IFXMIPS_DES_K1HR               ((u32 *)(IFXMIPS_DEU_BASE + 0x001C))
-#define IFXMIPS_DES_K1LR               ((u32 *)(IFXMIPS_DEU_BASE + 0x0020))
-#define IFXMIPS_DES_K3HR               ((u32 *)(IFXMIPS_DEU_BASE + 0x0024))
-#define IFXMIPS_DES_K3LR               ((u32 *)(IFXMIPS_DEU_BASE + 0x0028))
-#define IFXMIPS_DES_IVHR               ((u32 *)(IFXMIPS_DEU_BASE + 0x002C))
-#define IFXMIPS_DES_IVLR               ((u32 *)(IFXMIPS_DEU_BASE + 0x0030))
-#define IFXMIPS_DES_OHR                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0040))
-#define IFXMIPS_DES_OLR                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0050))
-#define IFXMIPS_AES_CON                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0050))
-#define IFXMIPS_AES_ID3R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0054))
-#define IFXMIPS_AES_ID2R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0058))
-#define IFXMIPS_AES_ID1R               ((u32 *)(IFXMIPS_DEU_BASE + 0x005C))
-#define IFXMIPS_AES_ID0R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0060))
-#define IFXMIPS_AES_K7R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0064))
-#define IFXMIPS_AES_K6R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0068))
-#define IFXMIPS_AES_K5R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x006C))
-#define IFXMIPS_AES_K4R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0070))
-#define IFXMIPS_AES_K3R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0074))
-#define IFXMIPS_AES_K2R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0078))
-#define IFXMIPS_AES_K1R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x007C))
-#define IFXMIPS_AES_K0R                        ((u32 *)(IFXMIPS_DEU_BASE + 0x0080))
-#define IFXMIPS_AES_IV3R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0084))
-#define IFXMIPS_AES_IV2R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0088))
-#define IFXMIPS_AES_IV1R               ((u32 *)(IFXMIPS_DEU_BASE + 0x008C))
-#define IFXMIPS_AES_IV0R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0090))
-#define IFXMIPS_AES_0D3R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0094))
-#define IFXMIPS_AES_0D2R               ((u32 *)(IFXMIPS_DEU_BASE + 0x0098))
-#define IFXMIPS_AES_OD1R               ((u32 *)(IFXMIPS_DEU_BASE + 0x009C))
-#define IFXMIPS_AES_OD0R               ((u32 *)(IFXMIPS_DEU_BASE + 0x00A0))
-
-/*------------ FUSE */
-
-#define IFXMIPS_FUSE_BASE_ADDR         (KSEG1 + 0x1F107354)
-
-
-/*------------ MPS */
-
-#define IFXMIPS_MPS_BASE_ADDR          (KSEG1 + 0x1F107000)
-#define IFXMIPS_MPS_SRAM               ((u32 *)(KSEG1 + 0x1F200000))
-
-#define IFXMIPS_MPS_CHIPID             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0344))
-#define IFXMIPS_MPS_VC0ENR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0000))
-#define IFXMIPS_MPS_VC1ENR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0004))
-#define IFXMIPS_MPS_VC2ENR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0008))
-#define IFXMIPS_MPS_VC3ENR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x000C))
-#define IFXMIPS_MPS_RVC0SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0010))
-#define IFXMIPS_MPS_RVC1SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0014))
-#define IFXMIPS_MPS_RVC2SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0018))
-#define IFXMIPS_MPS_RVC3SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x001C))
-#define IFXMIPS_MPS_SVC0SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0020))
-#define IFXMIPS_MPS_SVC1SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0024))
-#define IFXMIPS_MPS_SVC2SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0028))
-#define IFXMIPS_MPS_SVC3SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x002C))
-#define IFXMIPS_MPS_CVC0SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0030))
-#define IFXMIPS_MPS_CVC1SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0034))
-#define IFXMIPS_MPS_CVC2SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0038))
-#define IFXMIPS_MPS_CVC3SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x003C))
-#define IFXMIPS_MPS_RAD0SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0040))
-#define IFXMIPS_MPS_RAD1SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0044))
-#define IFXMIPS_MPS_SAD0SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0048))
-#define IFXMIPS_MPS_SAD1SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x004C))
-#define IFXMIPS_MPS_CAD0SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0050))
-#define IFXMIPS_MPS_CAD1SR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0054))
-#define IFXMIPS_MPS_AD0ENR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x0058))
-#define IFXMIPS_MPS_AD1ENR             ((u32 *)(IFXMIPS_MPS_BASE_ADDR + 0x005C))
-
-#define IFXMIPS_MPS_CHIPID_VERSION_GET(value)  (((value) >> 28) & ((1 << 4) - 1))
-#define IFXMIPS_MPS_CHIPID_VERSION_SET(value)  ((((1 << 4) - 1) & (value)) << 28)
-#define IFXMIPS_MPS_CHIPID_PARTNUM_GET(value)  (((value) >> 12) & ((1 << 16) - 1))
-#define IFXMIPS_MPS_CHIPID_PARTNUM_SET(value)  ((((1 << 16) - 1) & (value)) << 12)
-#define IFXMIPS_MPS_CHIPID_MANID_GET(value)    (((value) >> 1) & ((1 << 10) - 1))
-#define IFXMIPS_MPS_CHIPID_MANID_SET(value)    ((((1 << 10) - 1) & (value)) << 1)
-
-#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_cgu.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_cgu.h
deleted file mode 100644 (file)
index 899bbbc..0000000
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- *   Copyright (C) 2007 John Crispin <blogic@openwrt.org> 
- */
-#ifndef _IFXMIPS_CGU_H__
-#define _IFXMIPS_CGU_H__
-
-unsigned int cgu_get_mips_clock(int cpu);
-unsigned int cgu_get_io_region_clock(void);
-unsigned int cgu_get_fpi_bus_clock(int fpi);
-void cgu_setup_pci_clk(int internal_clock);
-unsigned int ifxmips_get_ddr_hz(void);
-unsigned int ifxmips_get_fpi_hz(void);
-unsigned int ifxmips_get_cpu_hz(void);
-
-#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_dma.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_dma.h
deleted file mode 100644 (file)
index 8ba852a..0000000
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- *   Copyright (C) 2005 infineon
- *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-#ifndef _IFXMIPS_DMA_H__
-#define _IFXMIPS_DMA_H__
-
-#define RCV_INT                                                1
-#define TX_BUF_FULL_INT                                        2
-#define TRANSMIT_CPT_INT                               4
-#define IFXMIPS_DMA_CH_ON                              1
-#define IFXMIPS_DMA_CH_OFF                             0
-#define IFXMIPS_DMA_CH_DEFAULT_WEIGHT                  100
-
-enum attr_t{
-       TX = 0,
-       RX = 1,
-       RESERVED = 2,
-       DEFAULT = 3,
-};
-
-#define DMA_OWN                                                1
-#define CPU_OWN                                                0
-#define DMA_MAJOR                                      250
-
-#define DMA_DESC_OWN_CPU                               0x0
-#define DMA_DESC_OWN_DMA                               0x80000000
-#define DMA_DESC_CPT_SET                               0x40000000
-#define DMA_DESC_SOP_SET                               0x20000000
-#define DMA_DESC_EOP_SET                               0x10000000
-
-#define MISCFG_MASK                                    0x40
-#define RDERR_MASK                                     0x20
-#define CHOFF_MASK                                     0x10
-#define DESCPT_MASK                                    0x8
-#define DUR_MASK                                       0x4
-#define EOP_MASK                                       0x2
-
-#define DMA_DROP_MASK                                  (1<<31)
-
-#define IFXMIPS_DMA_RX                                 -1
-#define IFXMIPS_DMA_TX                                 1
-
-struct dma_chan_map {
-       const char *dev_name;
-       enum attr_t dir;
-       int pri;
-       int irq;
-       int rel_chan_no;
-};
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-struct rx_desc {
-       u32 data_length:16;
-       volatile u32 reserved:7;
-       volatile u32 byte_offset:2;
-       volatile u32 Burst_length_offset:3;
-       volatile u32 EoP:1;
-       volatile u32 Res:1;
-       volatile u32 C:1;
-       volatile u32 OWN:1;
-       volatile u32 Data_Pointer; /* fixme: should be 28 bits here */
-};
-
-struct tx_desc {
-       volatile u32 data_length:16;
-       volatile u32 reserved1:7;
-       volatile u32 byte_offset:5;
-       volatile u32 EoP:1;
-       volatile u32 SoP:1;
-       volatile u32 C:1;
-       volatile u32 OWN:1;
-       volatile u32 Data_Pointer; /* fixme: should be 28 bits here */
-};
-#else /* BIG */
-struct rx_desc {
-       union {
-               struct {
-                       volatile u32 OWN:1;
-                       volatile u32 C:1;
-                       volatile u32 SoP:1;
-                       volatile u32 EoP:1;
-                       volatile u32 Burst_length_offset:3;
-                       volatile u32 byte_offset:2;
-                       volatile u32 reserve:7;
-                       volatile u32 data_length:16;
-               } field;
-               volatile u32 word;
-       } status;
-       volatile u32 Data_Pointer;
-};
-
-struct tx_desc {
-       union {
-               struct {
-                       volatile u32 OWN:1;
-                       volatile u32 C:1;
-                       volatile u32 SoP:1;
-                       volatile u32 EoP:1;
-                       volatile u32 byte_offset:5;
-                       volatile u32 reserved:7;
-                       volatile u32 data_length:16;
-               } field;
-               volatile u32 word;
-       } status;
-       volatile u32 Data_Pointer;
-};
-#endif /* ENDIAN */
-
-struct dma_channel_info {
-       /* relative channel number */
-       int rel_chan_no;
-       /* class for this channel for QoS */
-       int pri;
-       /* specify byte_offset */
-       int byte_offset;
-       /* direction */
-       int dir;
-       /* irq number */
-       int irq;
-       /* descriptor parameter */
-       int desc_base;
-       int desc_len;
-       int curr_desc;
-       int prev_desc; /* only used if it is a tx channel*/
-       /* weight setting for WFQ algorithm*/
-       int weight;
-       int default_weight;
-       int packet_size;
-       int burst_len;
-       /* on or off of this channel */
-       int control;
-       /* optional information for the upper layer devices */
-#if defined(CONFIG_IFXMIPS_ETHERNET_D2) || defined(CONFIG_IFXMIPS_PPA)
-       void *opt[64];
-#else
-       void *opt[25];
-#endif
-       /* Pointer to the peripheral device who is using this channel */
-       void *dma_dev;
-       /* channel operations */
-       void (*open)(struct dma_channel_info *pCh);
-       void (*close)(struct dma_channel_info *pCh);
-       void (*reset)(struct dma_channel_info *pCh);
-       void (*enable_irq)(struct dma_channel_info *pCh);
-       void (*disable_irq)(struct dma_channel_info *pCh);
-};
-
-struct dma_device_info {
-       /* device name of this peripheral */
-       char device_name[15];
-       int reserved;
-       int tx_burst_len;
-       int rx_burst_len;
-       int default_weight;
-       int current_tx_chan;
-       int current_rx_chan;
-       int num_tx_chan;
-       int num_rx_chan;
-       int max_rx_chan_num;
-       int max_tx_chan_num;
-       struct dma_channel_info *tx_chan[20];
-       struct dma_channel_info *rx_chan[20];
-       /*functions, optional*/
-       u8 *(*buffer_alloc)(int len, int *offset, void **opt);
-       void (*buffer_free)(u8 *dataptr, void *opt);
-       int (*intr_handler)(struct dma_device_info *info, int status);
-       void *priv;             /* used by peripheral driver only */
-};
-
-struct dma_device_info *dma_device_reserve(char *dev_name);
-void dma_device_release(struct dma_device_info *dev);
-void dma_device_register(struct dma_device_info *info);
-void dma_device_unregister(struct dma_device_info *info);
-int dma_device_read(struct dma_device_info *info, u8 **dataptr, void **opt);
-int dma_device_write(struct dma_device_info *info, u8 *dataptr, int len,
-       void *opt);
-
-#endif
-
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_ebu.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_ebu.h
deleted file mode 100644 (file)
index 4c9396a..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-#ifndef _IFXMIPS_EBU_H__
-#define _IFXMIPS_EBU_H__
-
-extern spinlock_t ebu_lock;
-
-#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_gpio.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_gpio.h
deleted file mode 100644 (file)
index a4c8c3f..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-#ifndef _IFXMIPS_GPIO_H__
-#define _IFXMIPS_GPIO_H__
-
-extern int ifxmips_port_reserve_pin(unsigned int port, unsigned int pin);
-extern int ifxmips_port_free_pin(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_open_drain(unsigned int port, unsigned int pin);
-extern int ifxmips_port_clear_open_drain(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_pudsel(unsigned int port, unsigned int pin);
-extern int ifxmips_port_clear_pudsel(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_puden(unsigned int port, unsigned int pin);
-extern int ifxmips_port_clear_puden(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_stoff(unsigned int port, unsigned int pin);
-extern int ifxmips_port_clear_stoff(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_dir_out(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_dir_in(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_output(unsigned int port, unsigned int pin);
-extern int ifxmips_port_clear_output(unsigned int port, unsigned int pin);
-extern int ifxmips_port_get_input(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_altsel0(unsigned int port, unsigned int pin);
-extern int ifxmips_port_clear_altsel0(unsigned int port, unsigned int pin);
-extern int ifxmips_port_set_altsel1(unsigned int port, unsigned int pin);
-extern int ifxmips_port_clear_altsel1(unsigned int port, unsigned int pin);
-
-#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_gptu.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_gptu.h
deleted file mode 100644 (file)
index 330c3cf..0000000
+++ /dev/null
@@ -1,155 +0,0 @@
-#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__
-
-
-/******************************************************************************
-       Copyright (c) 2002, Infineon Technologies.  All rights reserved.
-
-                               No Warranty
-   Because the program is licensed free of charge, there is no warranty for
-   the program, to the extent permitted by applicable law.  Except when
-   otherwise stated in writing the copyright holders and/or other parties
-   provide the program "as is" without warranty of any kind, either
-   expressed or implied, including, but not limited to, the implied
-   warranties of merchantability and fitness for a particular purpose. The
-   entire risk as to the quality and performance of the program is with
-   you.  should the program prove defective, you assume the cost of all
-   necessary servicing, repair or correction.
-
-   In no event unless required by applicable law or agreed to in writing
-   will any copyright holder, or any other party who may modify and/or
-   redistribute the program as permitted above, be liable to you for
-   damages, including any general, special, incidental or consequential
-   damages arising out of the use or inability to use the program
-   (including but not limited to loss of data or data being rendered
-   inaccurate or losses sustained by you or third parties or a failure of
-   the program to operate with any other programs), even if such holder or
-   other party has been advised of the possibility of such damages.
-******************************************************************************/
-
-
-/*
- * ####################################
- *              Definition
- * ####################################
- */
-
-/*
- *  Available Timer/Counter Index
- */
-#define TIMER(n, X)                     (n * 2 + (X ? 1 : 0))
-#define TIMER_ANY                       0x00
-#define TIMER1A                         TIMER(1, 0)
-#define TIMER1B                         TIMER(1, 1)
-#define TIMER2A                         TIMER(2, 0)
-#define TIMER2B                         TIMER(2, 1)
-#define TIMER3A                         TIMER(3, 0)
-#define TIMER3B                         TIMER(3, 1)
-
-/*
- *  Flag of Timer/Counter
- *  These flags specify the way in which timer is configured.
- */
-/*  Bit size of timer/counter.                      */
-#define TIMER_FLAG_16BIT                0x0000
-#define TIMER_FLAG_32BIT                0x0001
-/*  Switch between timer and counter.               */
-#define TIMER_FLAG_TIMER                0x0000
-#define TIMER_FLAG_COUNTER              0x0002
-/*  Stop or continue when overflowing/underflowing. */
-#define TIMER_FLAG_ONCE                 0x0000
-#define TIMER_FLAG_CYCLIC               0x0004
-/*  Count up or counter down.                       */
-#define TIMER_FLAG_UP                   0x0000
-#define TIMER_FLAG_DOWN                 0x0008
-/*  Count on specific level or edge.                */
-#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000
-#define TIMER_FLAG_LOW_LEVEL_SENSITIVE  0x0040
-#define TIMER_FLAG_RISE_EDGE            0x0010
-#define TIMER_FLAG_FALL_EDGE            0x0020
-#define TIMER_FLAG_ANY_EDGE             0x0030
-/*  Signal is syncronous to module clock or not.    */
-#define TIMER_FLAG_UNSYNC               0x0000
-#define TIMER_FLAG_SYNC                 0x0080
-/*  Different interrupt handle type.                */
-#define TIMER_FLAG_NO_HANDLE            0x0000
-#if defined(__KERNEL__)
-    #define TIMER_FLAG_CALLBACK_IN_IRQ  0x0100
-#endif  //  defined(__KERNEL__)
-#define TIMER_FLAG_SIGNAL               0x0300
-/*  Internal clock source or external clock source  */
-#define TIMER_FLAG_INT_SRC              0x0000
-#define TIMER_FLAG_EXT_SRC              0x1000
-
-
-/*
- *  ioctl Command
- */
-#define GPTU_REQUEST_TIMER              0x01    /*  General method to setup timer/counter.  */
-#define GPTU_FREE_TIMER                 0x02    /*  Free timer/counter.                     */
-#define GPTU_START_TIMER                0x03    /*  Start or resume timer/counter.          */
-#define GPTU_STOP_TIMER                 0x04    /*  Suspend timer/counter.                  */
-#define GPTU_GET_COUNT_VALUE            0x05    /*  Get current count value.                */
-#define GPTU_CALCULATE_DIVIDER          0x06    /*  Calculate timer divider from given freq.*/
-#define GPTU_SET_TIMER                  0x07    /*  Simplified method to setup timer.       */
-#define GPTU_SET_COUNTER                0x08    /*  Simplified method to setup counter.     */
-
-/*
- *  Data Type Used to Call ioctl
- */
-struct gptu_ioctl_param {
-    unsigned int                        timer;  /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
-                                                 *  GPTU_SET_COUNTER, this field is ID of expected      *
-                                                 *  timer/counter. If it's zero, a timer/counter would  *
-                                                 *  be dynamically allocated and ID would be stored in  *
-                                                 *  this field.                                         *
-                                                 *  In command GPTU_GET_COUNT_VALUE, this field is      *
-                                                 *  ignored.                                            *
-                                                 *  In other command, this field is ID of timer/counter *
-                                                 *  allocated.                                          */
-    unsigned int                        flag;   /*  In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and  *
-                                                 *  GPTU_SET_COUNTER, this field contains flags to      *
-                                                 *  specify how to configure timer/counter.             *
-                                                 *  In command GPTU_START_TIMER, zero indicate start    *
-                                                 *  and non-zero indicate resume timer/counter.         *
-                                                 *  In other command, this field is ignored.            */
-    unsigned long                       value;  /*  In command GPTU_REQUEST_TIMER, this field contains  *
-                                                 *  init/reload value.                                  *
-                                                 *  In command GPTU_SET_TIMER, this field contains      *
-                                                 *  frequency (0.001Hz) of timer.                       *
-                                                 *  In command GPTU_GET_COUNT_VALUE, current count      *
-                                                 *  value would be stored in this field.                *
-                                                 *  In command GPTU_CALCULATE_DIVIDER, this field       *
-                                                 *  contains frequency wanted, and after calculation,   *
-                                                 *  divider would be stored in this field to overwrite  *
-                                                 *  the frequency.                                      *
-                                                 *  In other command, this field is ignored.            */
-    int                                 pid;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
-                                                 *  if signal is required, this field contains process  *
-                                                 *  ID to which signal would be sent.                   *
-                                                 *  In other command, this field is ignored.            */
-    int                                 sig;    /*  In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER,   *
-                                                 *  if signal is required, this field contains signal   *
-                                                 *  number which would be sent.                         *
-                                                 *  In other command, this field is ignored.            */
-};
-
-/*
- * ####################################
- *              Data Type
- * ####################################
- */
-typedef void (*timer_callback)(unsigned long arg);
-
-extern int ifxmips_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long);
-extern int ifxmips_free_timer(unsigned int);
-extern int ifxmips_start_timer(unsigned int, int);
-extern int ifxmips_stop_timer(unsigned int);
-extern int ifxmips_reset_counter_flags(u32 timer, u32 flags);
-extern int ifxmips_get_count_value(unsigned int, unsigned long *);
-extern u32 ifxmips_cal_divider(unsigned long);
-extern int ifxmips_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long);
-extern int ifxmips_set_counter(unsigned int timer, unsigned int flag,
-       u32 reload, unsigned long arg1, unsigned long arg2);
-
-#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_irq.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_irq.h
deleted file mode 100644 (file)
index c7bd373..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- *   Copyright (C) 2005 infineon
- *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-#ifndef _IFXMIPS_IRQ__
-#define _IFXMIPS_IRQ__
-
-#define INT_NUM_IRQ0                   8
-#define INT_NUM_IM0_IRL0               (INT_NUM_IRQ0 + 0)
-#define INT_NUM_IM1_IRL0               (INT_NUM_IRQ0 + 32)
-#define INT_NUM_IM2_IRL0               (INT_NUM_IRQ0 + 64)
-#define INT_NUM_IM3_IRL0               (INT_NUM_IRQ0 + 96)
-#define INT_NUM_IM4_IRL0               (INT_NUM_IRQ0 + 128)
-#define INT_NUM_IM_OFFSET              (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
-
-#define IFXMIPSASC_TIR(x)              (INT_NUM_IM3_IRL0 + (x * 7))
-#define IFXMIPSASC_RIR(x)              (INT_NUM_IM3_IRL0 + (x * 7) + 2)
-#define IFXMIPSASC_EIR(x)              (INT_NUM_IM3_IRL0 + (x * 7) + 3)
-
-#define IFXMIPS_SSC_TIR                        (INT_NUM_IM0_IRL0 + 15)
-#define IFXMIPS_SSC_RIR                        (INT_NUM_IM0_IRL0 + 14)
-#define IFXMIPS_SSC_EIR                        (INT_NUM_IM0_IRL0 + 16)
-
-#define IFXMIPS_MEI_INT                        (INT_NUM_IM1_IRL0 + 23)
-
-#define IFXMIPS_TIMER6_INT             (INT_NUM_IM1_IRL0 + 23)
-#define IFXMIPS_USB_OC_INT             (INT_NUM_IM4_IRL0 + 23)
-
-#define MIPS_CPU_TIMER_IRQ             7
-
-#define IFXMIPS_DMA_CH0_INT            (INT_NUM_IM2_IRL0)
-#define IFXMIPS_DMA_CH1_INT            (INT_NUM_IM2_IRL0 + 1)
-#define IFXMIPS_DMA_CH2_INT            (INT_NUM_IM2_IRL0 + 2)
-#define IFXMIPS_DMA_CH3_INT            (INT_NUM_IM2_IRL0 + 3)
-#define IFXMIPS_DMA_CH4_INT            (INT_NUM_IM2_IRL0 + 4)
-#define IFXMIPS_DMA_CH5_INT            (INT_NUM_IM2_IRL0 + 5)
-#define IFXMIPS_DMA_CH6_INT            (INT_NUM_IM2_IRL0 + 6)
-#define IFXMIPS_DMA_CH7_INT            (INT_NUM_IM2_IRL0 + 7)
-#define IFXMIPS_DMA_CH8_INT            (INT_NUM_IM2_IRL0 + 8)
-#define IFXMIPS_DMA_CH9_INT            (INT_NUM_IM2_IRL0 + 9)
-#define IFXMIPS_DMA_CH10_INT           (INT_NUM_IM2_IRL0 + 10)
-#define IFXMIPS_DMA_CH11_INT           (INT_NUM_IM2_IRL0 + 11)
-#define IFXMIPS_DMA_CH12_INT           (INT_NUM_IM2_IRL0 + 25)
-#define IFXMIPS_DMA_CH13_INT           (INT_NUM_IM2_IRL0 + 26)
-#define IFXMIPS_DMA_CH14_INT           (INT_NUM_IM2_IRL0 + 27)
-#define IFXMIPS_DMA_CH15_INT           (INT_NUM_IM2_IRL0 + 28)
-#define IFXMIPS_DMA_CH16_INT           (INT_NUM_IM2_IRL0 + 29)
-#define IFXMIPS_DMA_CH17_INT           (INT_NUM_IM2_IRL0 + 30)
-#define IFXMIPS_DMA_CH18_INT           (INT_NUM_IM2_IRL0 + 16)
-#define IFXMIPS_DMA_CH19_INT           (INT_NUM_IM2_IRL0 + 21)
-
-#define IFXMIPS_USB_INT                        (INT_NUM_IM4_IRL0 + 22)
-#define IFXMIPS_USB_OC_INT             (INT_NUM_IM4_IRL0 + 23)
-
-
-extern void ifxmips_mask_and_ack_irq(unsigned int irq_nr);
-
-#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_led.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_led.h
deleted file mode 100644 (file)
index c97657a..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-#ifndef _IFXMIPS_LED_H__
-#define _IFXMIPS_LED_H__
-
-extern void ifxmips_led_set(unsigned int led);
-extern void ifxmips_led_clear(unsigned int led);
-extern void ifxmips_led_blink_set(unsigned int led);
-extern void ifxmips_led_blink_clear(unsigned int led);
-
-#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei.h
deleted file mode 100644 (file)
index d8a4b88..0000000
+++ /dev/null
@@ -1,270 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME    : danube_mei.h
-** PROJECT      : Danube
-** MODULES      : MEI
-**
-** DATE         : 1 Jan 2006
-** AUTHOR       : TC Chen
-** DESCRIPTION  : MEI Driver
-** COPYRIGHT    :       Copyright (c) 2006
-**                      Infineon Technologies AG
-**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-**    This program is free software; you can redistribute it and/or modify
-**    it under the terms of the GNU General Public License as published by
-**    the Free Software Foundation; either version 2 of the License, or
-**    (at your option) any later version.
-**
-** HISTORY
-** $Version $Date      $Author     $Comment
-*******************************************************************************/
-#ifndef                _IFXMIPS_MEI_H
-#define                _IFXMIPS_MEI_H
-/////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#include "ifxmips_mei_app.h"
-
-#define IFXMIPS_MEI_DEBUG
-#define IFXMIPS_MEI_CMV_EXTRA
-#define IFXMIPS_MEI_MAJOR      106
-
-/*
-**     Define where in ME Processor's memory map the Stratify chip lives
-*/
-
-#define MAXSWAPSIZE            8 * 1024        //8k *(32bits)
-
-//      Mailboxes
-#define MSG_LENGTH             16      // x16 bits
-#define YES_REPLY                      1
-#define NO_REPLY               0
-
-#define CMV_TIMEOUT            100     //jiffies
-#define MIB_INTERVAL           10000   //msec
-
-/***  Bit definitions ***/
-
-#define FALSE  0
-#define TRUE   1
-#define BIT0   1<<0
-#define BIT1   1<<1
-#define BIT2   1<<2
-#define BIT3   1<<3
-#define BIT4   1<<4
-#define BIT5   1<<5
-#define BIT6   1<<6
-#define BIT7   1<<7
-#define BIT8   1<<8
-#define BIT9   1<<9
-#define BIT10  1<<10
-#define BIT11  1<<11
-#define BIT12  1<<12
-#define BIT13  1<<13
-#define BIT14  1<<14
-#define BIT15  1<<15
-#define BIT16  1<<16
-#define BIT17  1<<17
-#define BIT18  1<<18
-#define BIT19  1<<19
-#define BIT20  1<<20
-#define BIT21  1<<21
-#define BIT22  1<<22
-#define BIT23  1<<23
-#define BIT24  1<<24
-#define BIT25  1<<25
-#define BIT26  1<<26
-#define BIT27  1<<27
-#define BIT28  1<<28
-#define BIT29  1<<29
-#define BIT30  1<<30
-#define BIT31  1<<31
-
-// ARC register addresss 
-#define ARC_STATUS                             0x0
-#define ARC_LP_START                           0x2
-#define ARC_LP_END                             0x3
-#define ARC_DEBUG                              0x5
-#define ARC_INT_MASK                           0x10A
-
-#define IRAM0_BASE                             (0x00000)
-#define IRAM1_BASE                             (0x04000)
-#define BRAM_BASE                              (0x0A000)
-
-#define ADSL_BASE                              (0x20000)
-#define CRI_BASE                               (ADSL_BASE + 0x11F00)
-#define CRI_CCR0                               (CRI_BASE + 0x00)
-#define CRI_RST                                        (CRI_BASE + 0x04*4)
-#define ADSL_DILV_BASE                                 (ADSL_BASE+0x20000)
-
-//
-#define IRAM0_ADDR_BIT_MASK   0xFFF
-#define IRAM1_ADDR_BIT_MASK   0xFFF
-#define BRAM_ADDR_BIT_MASK    0xFFF
-#define RX_DILV_ADDR_BIT_MASK 0x1FFF
-
-// CRI_CCR0 Register definitions        
-#define CLK_2M_MODE_ENABLE                     BIT6
-#define        ACL_CLK_MODE_ENABLE                     BIT4
-#define FDF_CLK_MODE_ENABLE                    BIT2
-#define STM_CLK_MODE_ENABLE                    BIT0
-
-// CRI_RST Register definitions 
-#define FDF_SRST                               BIT3
-#define MTE_SRST                               BIT2
-#define FCI_SRST                               BIT1
-#define AAI_SRST                               BIT0
-
-//      MEI_TO_ARC_INTERRUPT Register definitions
-#define        MEI_TO_ARC_INT1                 BIT3
-#define        MEI_TO_ARC_INT0                 BIT2
-#define MEI_TO_ARC_CS_DONE             BIT1    //need to check
-#define        MEI_TO_ARC_MSGAV                BIT0
-
-//      ARC_TO_MEI_INTERRUPT Register definitions
-#define        ARC_TO_MEI_INT1                 BIT8
-#define        ARC_TO_MEI_INT0                 BIT7
-#define        ARC_TO_MEI_CS_REQ               BIT6
-#define        ARC_TO_MEI_DBG_DONE             BIT5
-#define        ARC_TO_MEI_MSGACK               BIT4
-#define        ARC_TO_MEI_NO_ACCESS            BIT3
-#define        ARC_TO_MEI_CHECK_AAITX          BIT2
-#define        ARC_TO_MEI_CHECK_AAIRX          BIT1
-#define        ARC_TO_MEI_MSGAV                BIT0
-
-//      ARC_TO_MEI_INTERRUPT_MASK Register definitions
-#define        GP_INT1_EN                      BIT8
-#define        GP_INT0_EN                      BIT7
-#define        CS_REQ_EN                       BIT6
-#define        DBG_DONE_EN                     BIT5
-#define        MSGACK_EN                       BIT4
-#define        NO_ACC_EN                       BIT3
-#define        AAITX_EN                        BIT2
-#define        AAIRX_EN                        BIT1
-#define        MSGAV_EN                        BIT0
-
-#define        MEI_SOFT_RESET                  BIT0
-
-#define        HOST_MSTR                       BIT0
-
-#define JTAG_MASTER_MODE               0x0
-#define MEI_MASTER_MODE                        HOST_MSTR
-
-//      MEI_DEBUG_DECODE Register definitions
-#define MEI_DEBUG_DEC_MASK             (0x3)
-#define MEI_DEBUG_DEC_AUX_MASK         (0x0)
-#define MEI_DEBUG_DEC_DMP1_MASK                (0x1)
-#define MEI_DEBUG_DEC_DMP2_MASK                (0x2)
-#define MEI_DEBUG_DEC_CORE_MASK         (0x3)
-
-#define AUX_STATUS                     (0x0)
-//      ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
-//      page swap requests.
-#define MEI_TO_ARC_MAILBOX             (0xDFD0)
-#define MEI_TO_ARC_MAILBOXR            (MEI_TO_ARC_MAILBOX + 0x2C)
-
-#define        ARC_TO_MEI_MAILBOX              (0xDFA0)
-#define ARC_MEI_MAILBOXR               (ARC_TO_MEI_MAILBOX + 0x2C)
-
-// Codeswap request messages are indicated by setting BIT31 
-#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK     (0x80000000)
-
-// Clear Eoc messages received are indicated by setting BIT17 
-#define OMB_CLEAREOC_INTERRUPT_CODE    (0x00020000)
-
-/*
-**     Swap page header
-*/
-//      Page must be loaded at boot time if size field has BIT31 set
-#define BOOT_FLAG      (BIT31)
-#define BOOT_FLAG_MASK ~BOOT_FLAG
-
-#define FREE_RELOAD            1
-#define FREE_SHOWTIME          2
-#define FREE_ALL               3
-
-#define IFX_POP_EOC_DONE       0
-#define IFX_POP_EOC_FAIL       -1
-
-#define CLREOC_BUFF_SIZE       12      //number of clreoc commands being buffered
-
-// marcos
-#define        IFXMIPS_WRITE_REGISTER_L(data,addr)     do{ *((volatile u32*)(addr)) = (u32)(data);} while (0)
-#define IFXMIPS_READ_REGISTER_L(addr)  (*((volatile u32*)(addr)))
-#define SET_BIT(reg, mask)                  reg |= (mask)
-#define CLEAR_BIT(reg, mask)                reg &= (~mask)
-#define CLEAR_BITS(reg, mask)               CLEAR_BIT(reg, mask)
-#define SET_BITS(reg, mask)                 SET_BIT(reg, mask)
-#define SET_BITFIELD(reg, mask, off, val)   {reg &= (~mask); reg |= (val << off);}
-
-#define ALIGN_SIZE                         ( 1L<<10 )  //1K size align
-#define MEM_ALIGN(addr)                    (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) )
-
-// swap marco
-#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);}
-#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);}
-
-//      Swap page header describes size in 32-bit words, load location, and image offset
-//      for program and/or data segments
-typedef struct _arc_swp_page_hdr {
-       u32 p_offset;           //Offset bytes of progseg from beginning of image
-       u32 p_dest;             //Destination addr of progseg on processor
-       u32 p_size;             //Size in 32-bitwords of program segment
-       u32 d_offset;           //Offset bytes of dataseg from beginning of image
-       u32 d_dest;             //Destination addr of dataseg on processor
-       u32 d_size;             //Size in 32-bitwords of data segment
-} ARC_SWP_PAGE_HDR;
-
-#ifdef CONFIG_PROC_FS
-typedef struct reg_entry {
-       int *flag;
-       char name[30];          // big enough to hold names
-       char description[100];  // big enough to hold description
-       unsigned short low_ino;
-} reg_entry_t;
-#endif
-
-/*
-**     Swap image header
-*/
-#define GET_PROG       0       //      Flag used for program mem segment
-#define GET_DATA       1       //      Flag used for data mem segment
-
-//      Image header contains size of image, checksum for image, and count of
-//      page headers. Following that are 'count' page headers followed by
-//      the code and/or data segments to be loaded
-typedef struct _arc_img_hdr {
-       u32 size;               //      Size of binary image in bytes
-       u32 checksum;           //      Checksum for image
-       u32 count;              //      Count of swp pages in image
-       ARC_SWP_PAGE_HDR page[1];       //      Should be "count" pages - '1' to make compiler happy
-} ARC_IMG_HDR;
-
-typedef struct smmu_mem_info {
-       int type;
-       unsigned long nCopy;
-       unsigned long size;
-       unsigned char *address;
-       unsigned char *org_address;
-} smmu_mem_info_t;
-
-/*
-**     Native size for the Stratiphy interface is 32-bits. All reads and writes
-**     MUST be aligned on 32-bit boundaries. Trickery must be invoked to read word and/or
-**     byte data. Read routines are provided. Write routines are probably a bad idea, as the
-**     Arc has unrestrained, unseen access to the same memory, so a read-modify-write cycle
-**     could very well have unintended results.
-*/
-MEI_ERROR meiCMV (u16 *, int, u16 *);  // first arg is CMV to ARC, second to indicate whether need reply
-
-MEI_ERROR meiDebugWrite (u32 destaddr, u32 * databuff, u32 databuffsize);
-extern int ifx_mei_hdlc_send (char *hdlc_pkt, int hdlc_pkt_len);
-extern int ifx_mei_hdlc_read (char *hdlc_pkt, int max_hdlc_pkt_len);
-#if defined(__KERNEL__) || defined (IFXMIPS_PORT_RTEMS)
-extern void makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size,
-                    u16 * data, u16 * CMVMSG);
-int ifx_mei_hdlc_send (char *, int);
-int ifx_mei_hdlc_read (char *, int);
-#endif
-
-#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app.h
deleted file mode 100644 (file)
index cba742e..0000000
+++ /dev/null
@@ -1,116 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME    : ifxmips_mei_app.h
-** PROJECT      : Danube
-** MODULES      : MEI
-**
-** DATE         : 1 Jan 2006
-** AUTHOR       : TC Chen
-** DESCRIPTION  : MEI Driver
-** COPYRIGHT    :       Copyright (c) 2006
-**                      Infineon Technologies AG
-**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-**    This program is free software; you can redistribute it and/or modify
-**    it under the terms of the GNU General Public License as published by
-**    the Free Software Foundation; either version 2 of the License, or
-**    (at your option) any later version.
-**
-** HISTORY
-** $Version $Date      $Author     $Comment
-*******************************************************************************/
-#ifndef        _IFXMIPS_MEI_APP_H
-#define                _IFXMIPS_MEI_APP_H
-               //  ioctl control
-#define IFXMIPS_MEI_START                              300
-#define IFXMIPS_MEI_REPLY                              301
-#define IFXMIPS_MEI_NOREPLY                            302
-
-#define IFXMIPS_MEI_RESET                              303
-#define IFXMIPS_MEI_REBOOT                             304
-#define IFXMIPS_MEI_HALT                                       305
-#define IFXMIPS_MEI_CMV_WINHOST                                306
-#define IFXMIPS_MEI_CMV_READ                           307
-#define IFXMIPS_MEI_CMV_WRITE                          308
-#define IFXMIPS_MEI_MIB_DAEMON                         309
-#define IFXMIPS_MEI_SHOWTIME                           310
-#define IFXMIPS_MEI_REMOTE                             311
-#define IFXMIPS_MEI_READDEBUG                          312
-#define IFXMIPS_MEI_WRITEDEBUG                         313
-#define IFXMIPS_MEI_LOP                                        314
-
-#define IFXMIPS_MEI_PCM_SETUP                          315
-#define IFXMIPS_MEI_PCM_START_TIMER                    316
-#define IFXMIPS_MEI_PCM_STOP_TIMER                     317
-#define IFXMIPS_MEI_PCM_CHECK                          318
-#define IFXMIPS_MEI_GET_EOC_LEN                                319
-#define IFXMIPS_MEI_GET_EOC_DATA                               320
-#define IFXMIPS_MEI_PCM_GETDATA                                321
-#define IFXMIPS_MEI_PCM_GPIO                           322
-#define IFXMIPS_MEI_EOC_SEND                           323
-#define IFXMIPS_MEI_DOWNLOAD                           326
-#define IFXMIPS_MEI_JTAG_ENABLE                                327
-#define IFXMIPS_MEI_RUN                                        328
-#define IFXMIPS_MEI_DEBUG_MODE                         329
-
-/* Loop diagnostics mode of the ADSL line related constants */
-#define SET_ADSL_LOOP_DIAGNOSTICS_MODE                         330
-#define GET_ADSL_LOOP_DIAGNOSTICS_MODE                         331
-#define LOOP_DIAGNOSTIC_MODE_COMPLETE                   332
-#define IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE         333
-
-/* L3 Power Mode */
-/* Get current Power Moaagement Mode Status*/
-#define GET_POWER_MANAGEMENT_MODE                      334
-/* Set L3 Power Mode /disable L3 power mode */
-#define SET_L3_POWER_MODE                              335
-
-/* get current dual latency configuration */
-#define GET_ADSL_DUAL_LATENCY                          336
-/* enable/disable dual latency path */
-#define SET_ADSL_DUAL_LATENCY                          337
-
-/* Enable/Disable autoboot mode. */
-/* When the autoboot mode is disabled, the driver will excute some cmv 
-   commands for led control and dual latency when DSL startup.*/
-#define AUTOBOOT_ENABLE_SET                            338
-
-/* Enable/Disable Quiet Mode*/
-/* Quiet mode is used for firmware debug. if the quiet mode enable, the autoboot daemon will not reset arc when the arc need to reboot */
-#define QUIET_MODE_GET                                 339
-#define QUIET_MODE_SET                                 340
-
-/* Enable/Disable showtime lock*/
-/* showtime lock is used for firmware debug. if the showtime lock enable, the autoboot daemon will not reset arc when the arc reach showtime and need to reboot */
-#define SHOWTIME_LOCK_GET                              341
-#define SHOWTIME_LOCK_SET                              342
-
-#define L0_POWER_MODE 0
-#define L2_POWER_MODE 2
-#define L3_POWER_MODE 3
-
-#define DUAL_LATENCY_US_DS_DISABLE                     0
-#define DUAL_LATENCY_US_ENABLE                         (1<<0)
-#define DUAL_LATENCY_DS_ENABLE                         (1<<1)
-#define DUAL_LATENCY_US_DS_ENABLE                      (DUAL_LATENCY_US_ENABLE|DUAL_LATENCY_DS_ENABLE)
-
-#define ME_HDLC_IDLE 0
-#define ME_HDLC_INVALID_MSG 1
-#define ME_HDLC_MSG_QUEUED 2
-#define ME_HDLC_MSG_SENT 3
-#define ME_HDLC_RESP_RCVD 4
-#define ME_HDLC_RESP_TIMEOUT 5
-#define ME_HDLC_RX_BUF_OVERFLOW 6
-#define ME_HDLC_UNRESOLVED 1
-#define ME_HDLC_RESOLVED 2
-
-/***   Enums    ***/
-typedef enum mei_error {
-       MEI_SUCCESS = 0,
-       MEI_FAILURE = -1,
-       MEI_MAILBOX_FULL = -2,
-       MEI_MAILBOX_EMPTY = -3,
-       MEI_MAILBOX_TIMEOUT = -4,
-} MEI_ERROR;
-
-#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app_ioctl.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app_ioctl.h
deleted file mode 100644 (file)
index 08c3dd3..0000000
+++ /dev/null
@@ -1,1191 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME    : ifxmips_mei_app_ioctl.h
-** PROJECT      : Danube
-** MODULES      : MEI
-**
-** DATE         : 1 Jan 2006
-** AUTHOR       : TC Chen
-** DESCRIPTION  : MEI Driver
-** COPYRIGHT    :       Copyright (c) 2006
-**                      Infineon Technologies AG
-**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-**    This program is free software; you can redistribute it and/or modify
-**    it under the terms of the GNU General Public License as published by
-**    the Free Software Foundation; either version 2 of the License, or
-**    (at your option) any later version.
-**
-** HISTORY
-** $Version $Date      $Author     $Comment
-*******************************************************************************/
-#ifndef __IFXMIPS_MEI_APP_IOCTL_H
-#define __IFXMIPS_MEI_APP_IOCTL_H
-
-#ifdef __KERNEL__
-#include "ifxmips_mei_ioctl.h"
-#endif
-
-/* Interface Name */
-//#define INTERFACE_NAME <define the interface>
-
-/* adslLineTable constants */
-#define GET_ADSL_LINE_CODE             1
-
-/* adslAtucPhysTable constants */
-#define GET_ADSL_ATUC_PHY              4
-
-/* adslAturPhysTable constants */
-#define GET_ADSL_ATUR_PHY              10
-
-/* adslAtucChanTable constants */
-#define GET_ADSL_ATUC_CHAN_INFO        15
-
-/* adslAturChanTable constants */
-#define GET_ADSL_ATUR_CHAN_INFO                18
-
-/* adslAtucPerfDataTable constants */
-#define GET_ADSL_ATUC_PERF_DATA                21
-
-/* adslAturPerfDataTable constants */
-#define GET_ADSL_ATUR_PERF_DATA                40
-
-/* adslAtucIntervalTable constants */
-#define GET_ADSL_ATUC_INTVL_INFO       60
-
-/* adslAturIntervalTable constants */
-#define GET_ADSL_ATUR_INTVL_INFO       65
-
-/* adslAtucChanPerfDataTable constants */
-#define GET_ADSL_ATUC_CHAN_PERF_DATA   70
-
-/* adslAturChanPerfDataTable constants */
-#define GET_ADSL_ATUR_CHAN_PERF_DATA   90
-
-/* adslAtucChanIntervalTable constants */
-#define GET_ADSL_ATUC_CHAN_INTVL_INFO  110
-
-/* adslAturChanIntervalTable constants */
-#define GET_ADSL_ATUR_CHAN_INTVL_INFO  115
-
-/* adslLineAlarmConfProfileTable constants */
-#define GET_ADSL_ALRM_CONF_PROF                120
-#define SET_ADSL_ALRM_CONF_PROF                121
-
-/* adslAturTrap constants */
-#define ADSL_ATUR_TRAPS                        135
-
-//////////////////  RFC-3440 //////////////
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-/* adslLineExtTable */
-#define GET_ADSL_ATUC_LINE_EXT         201
-#define SET_ADSL_ATUC_LINE_EXT         203
-
-/* adslAtucPerfDateExtTable */
-#define GET_ADSL_ATUC_PERF_DATA_EXT    205
-
-/* adslAtucIntervalExtTable */
-#define GET_ADSL_ATUC_INTVL_EXT_INFO   221
-
-/* adslAturPerfDataExtTable */
-#define GET_ADSL_ATUR_PERF_DATA_EXT    225
-
-/* adslAturIntervalExtTable */
-#define GET_ADSL_ATUR_INTVL_EXT_INFO   233
-
-/* adslAlarmConfProfileExtTable */
-#define GET_ADSL_ALRM_CONF_PROF_EXT    235
-#define SET_ADSL_ALRM_CONF_PROF_EXT    236
-
-/* adslAturExtTrap */
-#define ADSL_ATUR_EXT_TRAPS            240
-
-#endif
-
-/* The following constants are added to support the WEB related ADSL Statistics */
-
-/* adslLineStatus constants */
-#define GET_ADSL_LINE_STATUS           245
-
-/* adslLineRate constants */
-#define GET_ADSL_LINE_RATE             250
-
-/* adslLineInformation constants */
-#define GET_ADSL_LINE_INFO             255
-
-/* adslNearEndPerformanceStats constants */
-#define GET_ADSL_NEAREND_STATS 270
-
-/* adslFarEndPerformanceStats constants */
-#define GET_ADSL_FAREND_STATS  290
-
-/* Sub-carrier related parameters */
-#define GET_ADSL_LINE_INIT_STATS       150
-#define GET_ADSL_POWER_SPECTRAL_DENSITY        151
-
-#define IFXMIPS_MIB_LO_ATUC            295
-#define IFXMIPS_MIB_LO_ATUR            296
-
-#define GET_ADSL_ATUC_SUBCARRIER_STATS 297
-#define GET_ADSL_ATUR_SUBCARRIER_STATS 298
-
-
-
-///////////////////////////////////////////////////////////
-// makeCMV(Opcode, Group, Address, Index, Size, Data)
-
-/* adslLineCode Flags */
-#define LINE_CODE_FLAG                 0x1     /* BIT 0th position */
-
-/* adslAtucPhysTable Flags */
-#define ATUC_PHY_SER_NUM_FLAG          0x1     /* BIT 0th position */
-#define ATUC_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 57, 0, 12, data,TxMessage) 
-#define ATUC_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 57, 12, 4, data,TxMessage) 
-
-#define ATUC_PHY_VENDOR_ID_FLAG                0x2     /* BIT 1 */
-#define ATUC_PHY_VENDOR_ID_FLAG_MAKECMV        makeCMV(H2D_CMV_READ, INFO, 64, 0, 4, data,TxMessage)
-
-#define ATUC_PHY_VER_NUM_FLAG          0x4     /* BIT 2 */
-#define ATUC_PHY_VER_NUM_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 58, 0, 8, data,TxMessage)
-
-#define ATUC_CURR_STAT_FLAG            0x8     /* BIT 3 */
-
-#define ATUC_CURR_OUT_PWR_FLAG         0x10    /* BIT 4 */
-#define ATUC_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 5, 1, data,TxMessage)
-
-#define ATUC_CURR_ATTR_FLAG            0x20    /* BIT 5 */
-#define ATUC_CURR_ATTR_FLAG_MAKECMV    makeCMV(H2D_CMV_READ, INFO, 69, 0, 2, data,TxMessage)
-
-
-/* adslAturPhysTable   Flags */
-#define ATUR_PHY_SER_NUM_FLAG          0x1     /* BIT 0th position */
-#define ATUR_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 62, 0, 12, data,TxMessage)
-#define ATUR_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 62, 12, 4, data,TxMessage)
-
-#define ATUR_PHY_VENDOR_ID_FLAG                0x2     /* BIT 1 */
-#define ATUR_PHY_VENDOR_ID_FLAG_MAKECMV        makeCMV(H2D_CMV_READ, INFO, 65, 0, 4, data,TxMessage)
-
-#define ATUR_PHY_VER_NUM_FLAG          0x4     /* BIT 2 */
-#define ATUR_PHY_VER_NUM_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 61, 0, 8, data,TxMessage)
-
-#define ATUR_SNRMGN_FLAG               0x8
-#if 0 /* [ Ritesh. Use PLAM 45 0 for 0.1dB resolution rather than INFO 68 3 */
-#define ATUR_SNRMGN_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, INFO, 68, 4, 1, data,TxMessage)
-#else
-#define ATUR_SNRMGN_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, PLAM_SNRMargin_0_1db, 0, 1, data, TxMessage)
-#endif
-
-#define ATUR_ATTN_FLAG                 0x10
-#define ATUR_ATTN_FLAG_MAKECMV         makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data,TxMessage)
-
-#define ATUR_CURR_STAT_FLAG            0x20    /* BIT 3 */
-
-#define ATUR_CURR_OUT_PWR_FLAG         0x40    /* BIT 4 */
-#define ATUR_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 5, 1, data,TxMessage)
-
-#define ATUR_CURR_ATTR_FLAG            0x80    /* BIT 5 */
-#define ATUR_CURR_ATTR_FLAG_MAKECMV    makeCMV(H2D_CMV_READ, INFO, 68, 0, 2, data,TxMessage)
-
-/* adslAtucChanTable Flags */
-#define ATUC_CHAN_INTLV_DELAY_FLAG     0x1     /* BIT 0th position */
-//KD #define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV        makeCMV(H2D_CMV_READ, RATE, 3, 1, 1, data,TxMessage)
-#define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV     makeCMV(H2D_CMV_READ, INFO, 92, 1, 1, data,TxMessage)
-
-#define ATUC_CHAN_CURR_TX_RATE_FLAG    0x2     /* BIT 1 */
-#define ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV    makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data,TxMessage)
-
-#define ATUC_CHAN_PREV_TX_RATE_FLAG    0x4     /* BIT 2 */
-
-/* adslAturChanTable Flags */
-#define ATUR_CHAN_INTLV_DELAY_FLAG     0x1     /* BIT 0th position */
-//KD #define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV        makeCMV(H2D_CMV_READ, RATE, 2, 1, 1, data,TxMessage)
-#define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV     makeCMV(H2D_CMV_READ, INFO, 93, 1, 1, data,TxMessage)
-
-#define ATUR_CHAN_CURR_TX_RATE_FLAG    0x2     /* BIT 1 */
-#define ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV    makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data,TxMessage)
-
-#define ATUR_CHAN_PREV_TX_RATE_FLAG    0x4     /* BIT 2 */
-
-#define ATUR_CHAN_CRC_BLK_LEN_FLAG     0x8     /* BIT 3 */
-
-/* adslAtucPerfDataTable Flags */
-#define ATUC_PERF_LOFS_FLAG            0x1     /* BIT 0th position */
-#define ATUC_PERF_LOSS_FLAG            0x2     /* BIT 1 */
-#define ATUC_PERF_LO_FLAG_MAKECMV              makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data,TxMessage)
-#define ATUC_PERF_ESS_FLAG             0x4     /* BIT 2 */
-#define ATUC_PERF_ESS_FLAG_MAKECMV             makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data,TxMessage) 
-#define ATUC_PERF_INITS_FLAG   0x8     /* BIT 3 */
-#define ATUC_PERF_VALID_INTVLS_FLAG    0x10 /* BIT 4 */
-#define ATUC_PERF_INVALID_INTVLS_FLAG  0x20 /* BIT 5 */
-#define ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUC_PERF_CURR_15MIN_LOFS_FLAG         0x80     /* BIT 7 */
-#define ATUC_PERF_CURR_15MIN_LOSS_FLAG         0x100 /* BIT 8 */
-#define ATUC_PERF_CURR_15MIN_ESS_FLAG          0x200   /* BIT 9 */
-#define ATUC_PERF_CURR_15MIN_INIT_FLAG         0x400 /* BIT 10 */
-#define ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
-#define ATUC_PERF_CURR_1DAY_LOFS_FLAG          0x1000 /* BIT 12 */
-#define ATUC_PERF_CURR_1DAY_LOSS_FLAG          0x2000 /* BIT 13 */
-#define ATUC_PERF_CURR_1DAY_ESS_FLAG           0x4000 /* BIT 14 */
-#define ATUC_PERF_CURR_1DAY_INIT_FLAG          0x8000 /* BIT 15 */
-#define ATUC_PERF_PREV_1DAY_MON_SEC_FLAG       0x10000 /* BIT 16 */
-#define ATUC_PERF_PREV_1DAY_LOFS_FLAG          0x20000 /* BIT 17 */
-#define ATUC_PERF_PREV_1DAY_LOSS_FLAG          0x40000 /* BIT 18 */
-#define ATUC_PERF_PREV_1DAY_ESS_FLAG           0x80000 /* BIT 19 */
-#define ATUC_PERF_PREV_1DAY_INITS_FLAG         0x100000 /* BIT 20 */
-
-/* adslAturPerfDataTable Flags */
-#define ATUR_PERF_LOFS_FLAG            0x1     /* BIT 0th position */
-#define ATUR_PERF_LOSS_FLAG            0x2     /* BIT 1 */
-#define ATUR_PERF_LPR_FLAG             0x4     /* BIT 2 */
-#define ATUR_PERF_LO_FLAG_MAKECMV              makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data,TxMessage)
-#define ATUR_PERF_ESS_FLAG             0x8     /* BIT 3 */
-#define ATUR_PERF_ESS_FLAG_MAKECMV             makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data,TxMessage)
-#define ATUR_PERF_VALID_INTVLS_FLAG    0x10 /* BIT 4 */
-#define ATUR_PERF_INVALID_INTVLS_FLAG  0x20 /* BIT 5 */
-#define ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUR_PERF_CURR_15MIN_LOFS_FLAG         0x80     /* BIT 7 */
-#define ATUR_PERF_CURR_15MIN_LOSS_FLAG         0x100 /* BIT 8 */
-#define ATUR_PERF_CURR_15MIN_LPR_FLAG          0x200 /* BIT 9 */
-#define ATUR_PERF_CURR_15MIN_ESS_FLAG          0x400   /* BIT 10 */
-#define ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG  0x800 /* BIT 11 */
-#define ATUR_PERF_CURR_1DAY_LOFS_FLAG          0x1000 /* BIT 12 */
-#define ATUR_PERF_CURR_1DAY_LOSS_FLAG          0x2000 /* BIT 13 */
-#define ATUR_PERF_CURR_1DAY_LPR_FLAG           0x4000 /* BIT 14 */
-#define ATUR_PERF_CURR_1DAY_ESS_FLAG           0x8000 /* BIT 15 */
-#define ATUR_PERF_PREV_1DAY_MON_SEC_FLAG       0x10000 /* BIT 16 */
-#define ATUR_PERF_PREV_1DAY_LOFS_FLAG          0x20000 /* BIT 17 */
-#define ATUR_PERF_PREV_1DAY_LOSS_FLAG          0x40000 /* BIT 18 */
-#define ATUR_PERF_PREV_1DAY_LPR_FLAG           0x80000 /* BIT 19 */
-#define ATUR_PERF_PREV_1DAY_ESS_FLAG           0x100000 /* BIT 20 */
-
-/* adslAtucIntervalTable Flags */
-#define ATUC_INTVL_LOF_FLAG            0x1     /* BIT 0th position */
-#define ATUC_INTVL_LOS_FLAG            0x2     /* BIT 1 */
-#define ATUC_INTVL_ESS_FLAG            0x4     /* BIT 2 */
-#define ATUC_INTVL_INIT_FLAG           0x8   /* BIT 3 */
-#define ATUC_INTVL_VALID_DATA_FLAG     0x10 /* BIT 4 */
-
-/* adslAturIntervalTable Flags */
-#define ATUR_INTVL_LOF_FLAG            0x1     /* BIT 0th position */
-#define ATUR_INTVL_LOS_FLAG            0x2     /* BIT 1 */
-#define ATUR_INTVL_LPR_FLAG            0x4     /* BIT 2 */
-#define ATUR_INTVL_ESS_FLAG            0x8     /* BIT 3 */
-#define ATUR_INTVL_VALID_DATA_FLAG     0x10 /* BIT 4 */
-
-/* adslAtucChanPerfDataTable Flags */
-#define ATUC_CHAN_RECV_BLK_FLAG        0x01    /* BIT 0th position */
-#define ATUC_CHAN_TX_BLK_FLAG  0x02    /* BIT 1 */
-#define ATUC_CHAN_CORR_BLK_FLAG        0x04    /* BIT 2 */
-#define ATUC_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */
-#define ATUC_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */
-#define ATUC_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */
-#define ATUC_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUC_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG        0x80 /* BIT 7 */
-#define ATUC_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */
-#define ATUC_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */
-#define ATUC_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */
-#define ATUC_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11*/
-#define ATUC_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */
-#define ATUC_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */
-#define ATUC_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */
-#define ATUC_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */
-#define ATUC_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */
-#define ATUC_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */
-#define ATUC_CHAN_PERF_PREV_1DAY_TX_BLK_FLAG 0x40000 /* BIT 18 */
-#define ATUC_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */
-#define ATUC_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */
-
-
-/* adslAturChanPerfDataTable Flags */
-#define ATUR_CHAN_RECV_BLK_FLAG   0x01         /* BIT 0th position */ 
-#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW            makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage)
-#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW            makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage)
-#define ATUR_CHAN_TX_BLK_FLAG     0x02         /* BIT 1 */
-#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW              makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage)
-#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW              makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage)
-#define ATUR_CHAN_CORR_BLK_FLAG   0x04         /* BIT 2 */
-#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL           makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data,TxMessage)
-#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST           makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data,TxMessage)
-#define ATUR_CHAN_UNCORR_BLK_FLAG 0x08         /* BIT 3 */
-#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL         makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data,TxMessage)
-#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST         makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data,TxMessage)
-#define ATUR_CHAN_PERF_VALID_INTVL_FLAG   0x10         /* BIT 4 */
-#define ATUR_CHAN_PERF_INVALID_INTVL_FLAG 0x20         /* BIT 5 */
-#define ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
-#define ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG    0x80   /* BIT 7 */
-#define ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG      0x100 /* BIT 8 */
-#define ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG    0x200 /* BIT 9 */
-#define ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG  0x400 /* BIT 10 */
-#define ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
-#define ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG     0x1000 /* BIT 12 */
-#define ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG       0x2000 /* BIT 13 */
-#define ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG     0x4000 /* BIT 14 */
-#define ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG   0x8000 /* BIT 15 */
-#define ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG     0x10000 /* BIT 16 */
-#define ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG     0x20000 /* BIT 17 */
-#define ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG    0x40000 /* BIT 18 */
-#define ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG     0x80000 /* BIT 19 */
-#define ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG   0x100000 /* BIT 20 */
-
-/* adslAtucChanIntervalTable Flags */
-#define ATUC_CHAN_INTVL_NUM_FLAG               0x1     /* BIT 0th position */
-#define ATUC_CHAN_INTVL_RECV_BLK_FLAG                  0x2     /* BIT 1 */
-#define ATUC_CHAN_INTVL_TX_BLK_FLAG            0x4     /* BIT 2 */
-#define ATUC_CHAN_INTVL_CORR_BLK_FLAG          0x8     /* BIT 3 */
-#define ATUC_CHAN_INTVL_UNCORR_BLK_FLAG        0x10    /* BIT 4 */
-#define ATUC_CHAN_INTVL_VALID_DATA_FLAG        0x20    /* BIT 5 */
-
-/* adslAturChanIntervalTable Flags */
-#define ATUR_CHAN_INTVL_NUM_FLAG               0x1     /* BIT 0th Position */
-#define ATUR_CHAN_INTVL_RECV_BLK_FLAG                  0x2     /* BIT 1 */
-#define ATUR_CHAN_INTVL_TX_BLK_FLAG            0x4     /* BIT 2 */
-#define ATUR_CHAN_INTVL_CORR_BLK_FLAG          0x8     /* BIT 3 */
-#define ATUR_CHAN_INTVL_UNCORR_BLK_FLAG        0x10    /* BIT 4 */
-#define ATUR_CHAN_INTVL_VALID_DATA_FLAG        0x20    /* BIT 5 */
-
-/* adslLineAlarmConfProfileTable Flags */
-#define ATUC_THRESH_15MIN_LOFS_FLAG            0x01   /* BIT 0th position */
-#define ATUC_THRESH_15MIN_LOSS_FLAG            0x02   /* BIT 1 */
-#define ATUC_THRESH_15MIN_ESS_FLAG             0x04   /* BIT 2 */
-#define ATUC_THRESH_FAST_RATEUP_FLAG           0x08   /* BIT 3 */
-#define ATUC_THRESH_INTERLEAVE_RATEUP_FLAG     0x10   /* BIT 4 */
-#define ATUC_THRESH_FAST_RATEDOWN_FLAG         0x20     /* BIT 5 */
-#define ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG           0x40    /* BIT 6 */
-#define ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG     0x80    /* BIT 7 */
-#define ATUR_THRESH_15MIN_LOFS_FLAG            0x100   /* BIT 8 */
-#define ATUR_THRESH_15MIN_LOSS_FLAG            0x200   /* BIT 9 */
-#define ATUR_THRESH_15MIN_LPRS_FLAG                    0x400   /* BIT 10 */
-#define ATUR_THRESH_15MIN_ESS_FLAG             0x800           /* BIT 11 */
-#define ATUR_THRESH_FAST_RATEUP_FLAG           0x1000          /* BIT 12 */
-#define ATUR_THRESH_INTERLEAVE_RATEUP_FLAG     0x2000          /* BIT 13 */
-#define ATUR_THRESH_FAST_RATEDOWN_FLAG         0x4000  /* BIT 14 */
-#define ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG   0x8000          /* BIT 15 */
-#define LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG  0x10000        /* BIT 16 */
-
-
-/* adslAturTraps Flags */
-#define ATUC_PERF_LOFS_THRESH_FLAG             0x1     /* BIT 0th position */
-#define ATUC_PERF_LOSS_THRESH_FLAG             0x2     /* BIT 1 */
-#define ATUC_PERF_ESS_THRESH_FLAG              0x4     /* BIT 2 */
-#define ATUC_RATE_CHANGE_FLAG                  0x8     /* BIT 3 */
-#define ATUR_PERF_LOFS_THRESH_FLAG             0x10    /* BIT 4 */
-#define ATUR_PERF_LOSS_THRESH_FLAG             0x20    /* BIT 5 */
-#define ATUR_PERF_LPRS_THRESH_FLAG             0x40    /* BIT 6 */
-#define ATUR_PERF_ESS_THRESH_FLAG              0x80    /* BIT 7 */
-#define ATUR_RATE_CHANGE_FLAG                  0x100   /* BIT 8 */
-
-//RFC- 3440 FLAG DEFINITIONS
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-/* adslLineExtTable flags */
-#define ATUC_LINE_TRANS_CAP_FLAG               0x1             /* BIT 0th position */
-#define ATUC_LINE_TRANS_CAP_FLAG_MAKECMV       makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage)
-#define ATUC_LINE_TRANS_CONFIG_FLAG            0x2             /* BIT 1 */
-#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV    makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage)
-#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR makeCMV(H2D_CMV_WRITE,INFO, 67, 0, 1, data,TxMessage)
-#define ATUC_LINE_TRANS_ACTUAL_FLAG            0x4             /* BIT 2 */
-#define ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV    makeCMV(H2D_CMV_READ,STAT, 1, 0, 1, data,TxMessage)
-#define LINE_GLITE_POWER_STATE_FLAG            0x8             /* BIT 3 */
-#define LINE_GLITE_POWER_STATE_FLAG_MAKECMV    makeCMV(H2D_CMV_READ,STAT, 0, 0, 1, data,TxMessage) 
-
-/* adslAtucPerfDataExtTable flags */
-#define ATUC_PERF_STAT_FASTR_FLAG         0x1 /* BIT 0th position */
-#define ATUC_PERF_STAT_FASTR_FLAG_MAKECMV      makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage)
-#define ATUC_PERF_STAT_FAILED_FASTR_FLAG 0x2 /* BIT 1 */
-#define ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage)
-#define ATUC_PERF_STAT_SESL_FLAG          0X4  /* BIT 2 */
-#define ATUC_PERF_STAT_SESL_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage)
-#define ATUC_PERF_STAT_UASL_FLAG                  0X8  /* BIT 3 */
-#define ATUC_PERF_STAT_UASL_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage)
-#define ATUC_PERF_CURR_15MIN_FASTR_FLAG           0X10 /* BIT 4 */
-#define ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG 0X20    /* BIT 5 */
-#define ATUC_PERF_CURR_15MIN_SESL_FLAG          0X40   /* BIT 6 */
-#define ATUC_PERF_CURR_15MIN_UASL_FLAG             0X80        /* BIT 7 */
-#define ATUC_PERF_CURR_1DAY_FASTR_FLAG             0X100       /* BIT 8 */
-#define ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG  0X200   /* BIT 9 */
-#define ATUC_PERF_CURR_1DAY_SESL_FLAG                  0X400   /* BIT 10 */
-#define ATUC_PERF_CURR_1DAY_UASL_FLAG                  0X800   /* BIT 11 */
-#define ATUC_PERF_PREV_1DAY_FASTR_FLAG              0X1000 /* BIT 12 */
-#define ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG  0X2000 /* BIT 13 */
-#define ATUC_PERF_PREV_1DAY_SESL_FLAG                  0X4000 /* BIT 14 */
-#define ATUC_PERF_PREV_1DAY_UASL_FLAG                  0X8000 /* BIT 15 */
-
-/* adslAturPerfDataExtTable */
-#define ATUR_PERF_STAT_SESL_FLAG               0X1 /* BIT 0th position */
-#define ATUR_PERF_STAT_SESL_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage)  
-#define ATUR_PERF_STAT_UASL_FLAG               0X2 /* BIT 1 */
-#define ATUR_PERF_STAT_UASL_FLAG_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage)
-#define ATUR_PERF_CURR_15MIN_SESL_FLAG         0X4 /* BIT 2 */
-#define ATUR_PERF_CURR_15MIN_UASL_FLAG         0X8 /* BIT 3 */
-#define ATUR_PERF_CURR_1DAY_SESL_FLAG          0X10 /* BIT 4 */
-#define ATUR_PERF_CURR_1DAY_UASL_FLAG          0X20 /* BIT 5 */
-#define ATUR_PERF_PREV_1DAY_SESL_FLAG          0X40 /* BIT 6 */
-#define ATUR_PERF_PREV_1DAY_UASL_FLAG          0X80 /* BIT 7 */
-
-/* adslAutcIntervalExtTable flags */
-#define ATUC_INTERVAL_FASTR_FLAG               0x1 /* Bit 0 */         
-#define ATUC_INTERVAL_FAILED_FASTR_FLAG                0x2 /* Bit 1 */         
-#define ATUC_INTERVAL_SESL_FLAG                        0x4 /* Bit 2 */         
-#define ATUC_INTERVAL_UASL_FLAG                        0x8 /* Bit 3 */         
-
-/* adslAturIntervalExtTable */
-#define ATUR_INTERVAL_SESL_FLAG                0X1 /* BIT 0th position */
-#define ATUR_INTERVAL_UASL_FLAG                0X2 /* BIT 1 */
-
-/* adslAlarmConfProfileExtTable */
-#define ATUC_THRESH_15MIN_FAILED_FASTR_FLAG 0X1/* BIT 0th position */
-#define ATUC_THRESH_15MIN_SESL_FLAG             0X2 /* BIT 1 */
-#define ATUC_THRESH_15MIN_UASL_FLAG             0X4 /* BIT 2 */
-#define ATUR_THRESH_15MIN_SESL_FLAG             0X8 /* BIT 3 */
-#define ATUR_THRESH_15MIN_UASL_FLAG             0X10 /* BIT 4 */
-
-/* adslAturExtTraps */
-#define ATUC_15MIN_FAILED_FASTR_TRAP_FLAG      0X1 /* BIT 0th position */
-#define ATUC_15MIN_SESL_TRAP_FLAG               0X2 /* BIT 1 */
-#define ATUC_15MIN_UASL_TRAP_FLAG               0X4 /* BIT 2 */
-#define ATUR_15MIN_SESL_TRAP_FLAG               0X8 /* BIT 3 */
-#define ATUR_15MIN_UASL_TRAP_FLAG               0X10 /* BIT 4 */
-
-#endif
-
-/* adslLineStatus Flags */
-#define LINE_STAT_MODEM_STATUS_FLAG     0x1 /* BIT 0th position */
-#define LINE_STAT_MODEM_STATUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage)
-#define LINE_STAT_MODE_SEL_FLAG         0x2 /* BIT 1 */
-#define LINE_STAT_MODE_SEL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data, TxMessage)
-#define LINE_STAT_TRELLCOD_ENABLE_FLAG 0x4 /* BIT 2 */
-#define LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, OPTN, 2, 0, 1, data, TxMessage)
-#define LINE_STAT_LATENCY_FLAG          0x8 /* BIT 3 */
-#define LINE_STAT_LATENCY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data, TxMessage)
-
-/* adslLineRate Flags */
-#define LINE_RATE_DATA_RATEDS_FLAG     0x1 /* BIT 0th position */
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 2, 2, data, TxMessage)
-
-
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 0, 2, data, TxMessage)
-
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 2, 2, data, TxMessage)
-
-#define LINE_RATE_DATA_RATEUS_FLAG     0x2 /* BIT 1 */
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 2, 2, data, TxMessage)
-
-
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 0, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 0, 2, data, TxMessage)
-
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 1, 1, data, TxMessage)
-#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 2, 2, data, TxMessage)
-
-#define LINE_RATE_ATTNDRDS_FLAG        0x4 /* BIT 2 */
-#define LINE_RATE_ATTNDRDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 2, data, TxMessage)
-
-#define LINE_RATE_ATTNDRUS_FLAG                0x8 /* BIT 3 */
-#define LINE_RATE_ATTNDRUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 4, 2, data, TxMessage)
-
-/* adslLineInformation Flags */
-#define LINE_INFO_INTLV_DEPTHDS_FLAG   0x1 /* BIT 0th position */
-#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV       makeCMV(H2D_CMV_READ, CNFG, 27, 0, 1, data, TxMessage)
-#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV       makeCMV(H2D_CMV_READ, CNFG, 27, 1, 1, data, TxMessage)
-#define LINE_INFO_INTLV_DEPTHUS_FLAG   0x2 /* BIT 1 */
-#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV       makeCMV(H2D_CMV_READ, CNFG, 16, 0, 1, data, TxMessage)
-#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV       makeCMV(H2D_CMV_READ, CNFG, 16, 1, 1, data, TxMessage)
-#define LINE_INFO_LATNDS_FLAG          0x4 /* BIT 2 */
-#define LINE_INFO_LATNDS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 68, 1, 1, data, TxMessage)
-#define LINE_INFO_LATNUS_FLAG          0x8 /* BIT 3 */
-#define LINE_INFO_LATNUS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 69, 1, 1, data, TxMessage)
-#define LINE_INFO_SATNDS_FLAG                  0x10 /* BIT 4 */
-#define LINE_INFO_SATNDS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data, TxMessage)
-#define LINE_INFO_SATNUS_FLAG                  0x20 /* BIT 5 */
-#define LINE_INFO_SATNUS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, INFO, 69, 2, 1, data, TxMessage)
-#define LINE_INFO_SNRMNDS_FLAG                 0x40 /* BIT 6 */
-#define LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV   makeCMV(H2D_CMV_READ, INFO, 68, 3, 1, data, TxMessage)
-#define LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV   makeCMV(H2D_CMV_READ, RATE, 3, 0, 1, data, TxMessage)
-#define LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 46, 0, 1, data, TxMessage)
-#define LINE_INFO_SNRMNUS_FLAG                 0x80 /* BIT 7 */
-#define LINE_INFO_SNRMNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 3, 1, data, TxMessage)
-#define LINE_INFO_ACATPDS_FLAG         0x100 /* BIT 8 */
-#define LINE_INFO_ACATPDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 6, 1, data, TxMessage)
-#define LINE_INFO_ACATPUS_FLAG         0x200 /* BIT 9 */
-#define LINE_INFO_ACATPUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 6, 1, data, TxMessage)
-
-/* adslNearEndPerformanceStats Flags */
-#define NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data, TxMessage)
-#define NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data, TxMessage)
-#define NEAREND_PERF_SUPERFRAME_FLAG   0x1 /* BIT 0th position */
-#define NEAREND_PERF_LOS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data, TxMessage)
-#define NEAREND_PERF_LOS_FLAG          0x2 /* BIT 1 */
-#define NEAREND_PERF_LOF_FLAG          0x4 /* BIT 2 */
-#define NEAREND_PERF_LPR_FLAG          0x8 /* BIT 3 */
-#define NEAREND_PERF_NCD_FLAG          0x10 /* BIT 4 */
-#define NEAREND_PERF_LCD_FLAG          0x20 /* BIT 5 */
-#define NEAREND_PERF_CRC_FLAG          0x40 /* BIT 6 */
-#define NEAREND_PERF_CRC_FLAG_LP0_MAKECMV      makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data, TxMessage)
-#define NEAREND_PERF_CRC_FLAG_LP1_MAKECMV      makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data, TxMessage)
-#define NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data, TxMessage)
-#define NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data, TxMessage)
-#define NEAREND_PERF_RSCORR_FLAG       0x80 /* BIT 7 */
-#define NEAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 6, 0, 1, data, TxMessage)
-#define NEAREND_PERF_FECS_FLAG         0x100 /* BIT 8 */
-#define NEAREND_PERF_ES_FLAG_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data, TxMessage)
-#define NEAREND_PERF_ES_FLAG           0x200 /* BIT 9 */
-#define NEAREND_PERF_SES_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage)
-#define NEAREND_PERF_SES_FLAG          0x400 /* BIT 10 */
-#define NEAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 9, 0, 1, data, TxMessage)
-#define NEAREND_PERF_LOSS_FLAG         0x800 /* BIT 11 */
-#define NEAREND_PERF_UAS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage)
-#define NEAREND_PERF_UAS_FLAG          0x1000 /* BIT 12 */
-#define NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 11, 0, 2, data, TxMessage)
-#define NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 11, 2, 2, data, TxMessage)
-#define NEAREND_PERF_HECERR_FLAG               0x2000 /* BIT 13 */
-
-/* adslFarEndPerformanceStats Flags */
-#define FAREND_PERF_LOS_FLAG_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data, TxMessage)
-#define FAREND_PERF_LOS_FLAG   0x1 /* BIT 0th position */
-#define FAREND_PERF_LOF_FLAG   0x2 /* BIT 1 */
-#define FAREND_PERF_LPR_FLAG   0x4 /* BIT 2 */
-#define FAREND_PERF_NCD_FLAG   0x8 /* BIT 3 */
-#define FAREND_PERF_LCD_FLAG   0x10 /* BIT 4 */
-#define FAREND_PERF_CRC_FLAG_LP0_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 24, 0, 1, data, TxMessage)
-#define FAREND_PERF_CRC_FLAG_LP1_MAKECMV       makeCMV(H2D_CMV_READ, PLAM, 24, 1, 1, data, TxMessage)
-#define FAREND_PERF_CRC_FLAG   0x20 /* BIT 5 */
-#define FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV    makeCMV(H2D_CMV_READ, PLAM, 28, 0, 1, data, TxMessage)
-#define FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV    makeCMV(H2D_CMV_READ, PLAM, 28, 1, 1, data, TxMessage)
-#define FAREND_PERF_RSCORR_FLAG        0x40 /* BIT 6 */
-#define FAREND_PERF_FECS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, PLAM, 32, 0, 1, data, TxMessage)
-#define FAREND_PERF_FECS_FLAG  0x80 /* BIT 7 */
-#define FAREND_PERF_ES_FLAG_MAKECMV    makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data, TxMessage)
-#define FAREND_PERF_ES_FLAG    0x100 /* BIT 8 */
-#define FAREND_PERF_SES_FLAG_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage)
-#define FAREND_PERF_SES_FLAG   0x200 /* BIT 9 */
-#define FAREND_PERF_LOSS_FLAG_MAKECMV  makeCMV(H2D_CMV_READ, PLAM, 35, 0, 1, data, TxMessage)
-#define FAREND_PERF_LOSS_FLAG  0x400 /* BIT 10 */
-#define FAREND_PERF_UAS_FLAG_MAKECMV   makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage)
-#define FAREND_PERF_UAS_FLAG   0x800 /* BIT 11 */
-#define FAREND_PERF_HECERR_FLAG_BC0_MAKECMV    makeCMV(H2D_CMV_READ, PLAM, 37, 0, 2, data, TxMessage)
-#define FAREND_PERF_HECERR_FLAG_BC1_MAKECMV    makeCMV(H2D_CMV_READ, PLAM, 37, 2, 2, data, TxMessage)
-#define FAREND_PERF_HECERR_FLAG        0x1000 /* BIT 12 */
-// 603221:tc.chen end
-/* TR-69 related additional parameters - defines */
-/* Defines for  struct adslATURSubcarrierInfo */
-#define        NEAREND_HLINSC  0x1
-#define NEAREND_HLINSC_MAKECMV(mode)           makeCMV(mode, INFO, 71, 2, 1, data, TxMessage)
-#define        NEAREND_HLINPS  0x2
-#define NEAREND_HLINPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 73, idx, size, data, TxMessage)
-#define        NEAREND_HLOGMT  0x4
-#define NEAREND_HLOGMT_MAKECMV(mode)           makeCMV(mode, INFO, 80, 0, 1, data, TxMessage)
-#define NEAREND_HLOGPS 0x8
-#define NEAREND_HLOGPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 75, idx, size, data, TxMessage)
-#define NEAREND_QLNMT  0x10
-#define NEAREND_QLNMT_MAKECMV(mode)            makeCMV(mode, INFO, 80, 1, 1, data, TxMessage)
-#define        NEAREND_QLNPS   0x20
-#define NEAREND_QLNPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 77, idx, size, data, TxMessage)
-#define        NEAREND_SNRMT   0x40
-#define NEAREND_SNRMT_MAKECMV(mode)            makeCMV(mode, INFO, 80, 2, 1, data, TxMessage)
-#define        NEAREND_SNRPS   0x80
-#define NEAREND_SNRPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 78, idx, size, data, TxMessage)
-#define        NEAREND_BITPS   0x100
-#define NEAREND_BITPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 22, idx, size, data, TxMessage)
-#define        NEAREND_GAINPS  0x200
-#define NEAREND_GAINPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 24, idx, size, data, TxMessage)
-
-/* Defines for  struct adslATUCSubcarrierInfo */
-#define         FAREND_HLINSC  0x1
-
-/* As per the feedback from Knut on 21/08/2006, the cmv command of HLINSC should be INFO 70 2 */
-#define  FAREND_HLINSC_MAKECMV(mode)           makeCMV(mode, INFO, 70, 2, 1, data, TxMessage)
-#define         FAREND_HLINPS  0x2
-#define  FAREND_HLINPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 72, idx, size, data, TxMessage)
-#define         FAREND_HLOGMT  0x4
-#define  FAREND_HLOGMT_MAKECMV(mode)           makeCMV(mode, INFO, 79, 0, 1, data, TxMessage)
-#define  FAREND_HLOGPS 0x8
-#define  FAREND_HLOGPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 74, idx, size, data, TxMessage)
-#define  FAREND_QLNMT  0x10
-#define  FAREND_QLNMT_MAKECMV(mode)            makeCMV(mode, INFO, 79, 1, 1, data, TxMessage)
-#define         FAREND_QLNPS   0x20
-#define  FAREND_QLNPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 76, idx, size, data, TxMessage)
-#define         FAREND_SNRMT   0x40
-#define  FAREND_SNRMT_MAKECMV(mode)            makeCMV(mode, INFO, 79, 2, 1, data, TxMessage)
-#define         FAREND_SNRPS   0x80
-#define  FAREND_SNRPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 11, idx, size, data, TxMessage)
-#define  FAREND_SNRPS_DIAG_MAKECMV(mode,idx,size)      makeCMV(mode, INFO, 10, idx, size, data, TxMessage)
-#define         FAREND_BITPS   0x100
-#define  FAREND_BITPS_MAKECMV(mode,idx,size)   makeCMV(mode, INFO, 23, idx, size, data, TxMessage)
-#define         FAREND_GAINPS  0x200
-#define  FAREND_GAINPS_MAKECMV(mode,idx,size)  makeCMV(mode, INFO, 25, idx, size, data, TxMessage)
-
-
-// GET_ADSL_POWER_SPECTRAL_DENSITY
-#define NOMPSD_US_MAKECMV      makeCMV(H2D_CMV_READ, INFO, 102, 0, 1, data, TxMessage)
-#define NOMPSD_DS_MAKECMV      makeCMV(H2D_CMV_READ, INFO, 102, 1, 1, data, TxMessage)
-#define PCB_US_MAKECMV         makeCMV(H2D_CMV_READ, INFO, 102, 6, 1, data, TxMessage)
-#define PCB_DS_MAKECMV         makeCMV(H2D_CMV_READ, INFO, 102, 7, 1, data, TxMessage)
-#define        RMSGI_US_MAKECMV        makeCMV(H2D_CMV_READ, INFO, 102, 10, 1, data, TxMessage)
-#define        RMSGI_DS_MAKECMV        makeCMV(H2D_CMV_READ, INFO, 102, 11, 1, data, TxMessage)
-
-/////////////////////////////////////////////////Macro Definitions ? FLAG Setting & Testing
-
-#define SET_FLAG(flags, flag_val)   ((*flags) = ((*flags) | flag_val))
-//     -- This macro sets the flags with the flag_val. Here flags is passed as a pointer
-
-#define IS_FLAG_SET(flags, test_flag)  (((*flags) & (test_flag)) == (test_flag)? test_flag:0)
-//     -- This macro verifies whether test_flag has been set in flags. Here flags is passed as a pointer
-
-
-#define CLR_FLAG(flags, flag_bit)      ((*flags) = (*flags) & (~flag_bit))
-//     -- This macro resets the specified flag_bit in the flags. Here flags is passed as a pointer
-
-
-////////////////////////////////////////////////DATA STRUCTURES ORGANIZATION
-       
-//Here are the data structures used for accessing mib parameters. The ioctl call includes the third parameter as a void pointer. This parameter has to be type-casted in the driver code to the corresponding structure depending upon the command type. For Ex: consider the ioctl used to get the adslLineCode type, ioctl(fd,GET_ADSL_LINE_CODE,void *struct_adslLineTableEntry). In the driver code we check on the type of the command, i.e GET_ADSL_LINE_CODE and type-cast the void pointer to struct adslLineTableEntry type.
-       //
-#define u32 unsigned int
-#define u16 unsigned short
-#define s16 short
-#define u8 unsigned char
-
-
-typedef u32 AdslPerfTimeElapsed;
-typedef u32 AdslPerfPrevDayCount;
-typedef u32 PerfCurrentCount;
-typedef u32 PerfIntervalCount;
-typedef u32 AdslPerfCurrDayCount;
-
-
-//ioctl(int fd, GET_ADSL_LINE_CODE, void *struct_adslLineTableEntry)
-
-typedef struct adslLineTableEntry {
-       int ifIndex;
-       int adslLineCode;
-       u8 flags;
-} adslLineTableEntry;
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-typedef struct adslLineExtTableEntry {
-       int ifIndex;
-       u16 adslLineTransAtucCap;
-       u16 adslLineTransAtucConfig;
-       u16 adslLineTransAtucActual;
-       int adslLineGlitePowerState;
-       u32 flags;
-}adslLineExtTableEntry;
-#endif
-//ioctl(int fd, GET_ADSL_ATUC_PHY, void  *struct_adslAtucPhysEntry)
-#ifndef u_char 
-#define u_char u8
-#endif
-
-typedef struct adslVendorId {
-       u16     country_code;
-       u_char  provider_id[4];  /* Ascii characters */
-       u_char  revision_info[2];
-}adslVendorId;
-
-typedef struct adslAtucPhysEntry {
-       int ifIndex;
-       char serial_no[32];
-       union {
-       char vendor_id[16];
-               adslVendorId vendor_info;
-       } vendor_id;
-       char version_no[16];
-       u32 status;
-       int outputPwr;
-       u32 attainableRate;
-       u8 flags;
-} adslAtucPhysEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_PHY, void  *struct_adslAturPhysEntry)
-
-typedef struct adslAturPhysEntry {
-       int ifIndex;
-       char serial_no[32];
-       union {
-       char vendor_id[16];
-               adslVendorId vendor_info;
-       } vendor_id;
-       char version_no[16];
-       int SnrMgn;
-       u32 Attn;
-       u32 status;
-       int outputPwr;
-       u32 attainableRate;
-       u8 flags;
-} adslAturPhysEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUC_CHAN_INFO, void *struct_adslAtucChanInfo)
-
-typedef struct adslAtucChanInfo {
-       int ifIndex;
-       u32 interleaveDelay;
-       u32 currTxRate;
-       u32 prevTxRate;
-       u8 flags;
-} adslAtucChanInfo;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_CHAN_INFO, void *struct_adslAturChanInfo)
-
-typedef struct adslAturChanInfo {
-       int ifIndex;
-       u32 interleaveDelay;
-       u32 currTxRate;
-       u32 prevTxRate;
-       u32 crcBlkLen;
-       u8 flags;
-} adslAturChanInfo;
-
-
-//ioctl(int fd, GET_ADSL_ATUC_PERF_DATA,  void *struct_atucPerfDataEntry)
-
-typedef struct atucPerfDataEntry
-{
-   int                 ifIndex;
-   u32                         adslAtucPerfLofs;             
-   u32                         adslAtucPerfLoss;             
-   u32                         adslAtucPerfESs;                 
-   u32                         adslAtucPerfInits;
-   int                         adslAtucPerfValidIntervals;
-   int                         adslAtucPerfInvalidIntervals;
-   AdslPerfTimeElapsed         adslAtucPerfCurr15MinTimeElapsed;
-   PerfCurrentCount    adslAtucPerfCurr15MinLofs;
-   PerfCurrentCount    adslAtucPerfCurr15MinLoss;
-   PerfCurrentCount    adslAtucPerfCurr15MinESs;
-   PerfCurrentCount    adslAtucPerfCurr15MinInits;
-   AdslPerfTimeElapsed         adslAtucPerfCurr1DayTimeElapsed;
-   AdslPerfCurrDayCount adslAtucPerfCurr1DayLofs;
-   AdslPerfCurrDayCount adslAtucPerfCurr1DayLoss;
-   AdslPerfCurrDayCount adslAtucPerfCurr1DayESs;
-   AdslPerfCurrDayCount adslAtucPerfCurr1DayInits;
-   int                         adslAtucPerfPrev1DayMoniSecs;
-   AdslPerfPrevDayCount adslAtucPerfPrev1DayLofs;
-   AdslPerfPrevDayCount adslAtucPerfPrev1DayLoss;
-   AdslPerfPrevDayCount adslAtucPerfPrev1DayESs;
-   AdslPerfPrevDayCount adslAtucPerfPrev1DayInits;
-   u32                 flags;
-} atucPerfDataEntry;
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-typedef struct atucPerfDataExtEntry
- {
-  int ifIndex;
-  u32 adslAtucPerfStatFastR;
-  u32 adslAtucPerfStatFailedFastR;
-  u32 adslAtucPerfStatSesL;
-  u32 adslAtucPerfStatUasL;
-  u32 adslAtucPerfCurr15MinFastR;
-  u32 adslAtucPerfCurr15MinFailedFastR;
-  u32 adslAtucPerfCurr15MinSesL;
-  u32 adslAtucPerfCurr15MinUasL;
-  u32 adslAtucPerfCurr1DayFastR;
-  u32 adslAtucPerfCurr1DayFailedFastR;
-  u32 adslAtucPerfCurr1DaySesL;
-  u32 adslAtucPerfCurr1DayUasL;
-  u32 adslAtucPerfPrev1DayFastR;
-  u32 adslAtucPerfPrev1DayFailedFastR;
-  u32 adslAtucPerfPrev1DaySesL;
-  u32 adslAtucPerfPrev1DayUasL;
-  u32  flags;
-} atucPerfDataExtEntry; 
-
-#endif
-//ioctl(int fd, GET_ADSL_ATUR_PERF_DATA, void *struct_aturPerfDataEntry)
-
-typedef struct aturPerfDataEntry
-{
-   int                 ifIndex;
-   u32                         adslAturPerfLofs;             
-   u32                         adslAturPerfLoss;             
-   u32                         adslAturPerfLprs;                 
-   u32                         adslAturPerfESs;
-   int                         adslAturPerfValidIntervals;
-   int                         adslAturPerfInvalidIntervals;
-   AdslPerfTimeElapsed         adslAturPerfCurr15MinTimeElapsed;
-   PerfCurrentCount    adslAturPerfCurr15MinLofs;
-   PerfCurrentCount    adslAturPerfCurr15MinLoss;
-   PerfCurrentCount    adslAturPerfCurr15MinLprs;
-   PerfCurrentCount    adslAturPerfCurr15MinESs;
-   AdslPerfTimeElapsed         adslAturPerfCurr1DayTimeElapsed;
-   AdslPerfCurrDayCount adslAturPerfCurr1DayLofs;
-   AdslPerfCurrDayCount adslAturPerfCurr1DayLoss;
-   AdslPerfCurrDayCount adslAturPerfCurr1DayLprs;
-   AdslPerfCurrDayCount adslAturPerfCurr1DayESs;
-   int                         adslAturPerfPrev1DayMoniSecs;
-   AdslPerfPrevDayCount adslAturPerfPrev1DayLofs;
-   AdslPerfPrevDayCount adslAturPerfPrev1DayLoss;
-   AdslPerfPrevDayCount adslAturPerfPrev1DayLprs;
-   AdslPerfPrevDayCount adslAturPerfPrev1DayESs;
-   u32                 flags;
-} aturPerfDataEntry;
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-typedef struct aturPerfDataExtEntry
- {
-  int ifIndex;
-  u32 adslAturPerfStatSesL;
-  u32 adslAturPerfStatUasL;
-  u32 adslAturPerfCurr15MinSesL;
-  u32 adslAturPerfCurr15MinUasL;
-  u32 adslAturPerfCurr1DaySesL;
-  u32 adslAturPerfCurr1DayUasL;
-  u32 adslAturPerfPrev1DaySesL;
-  u32 adslAturPerfPrev1DayUasL;
-  u32  flags;
-} aturPerfDataExtEntry;
-#endif
-//ioctl(int fd, GET_ADSL_ATUC_INTVL_INFO, void *struct_adslAtucInvtInfo)
-
-typedef struct adslAtucIntvlInfo {
-       int ifIndex;
-        int IntervalNumber;
-       PerfIntervalCount intervalLOF;
-       PerfIntervalCount intervalLOS;
-       PerfIntervalCount intervalES;
-       PerfIntervalCount intervalInits; 
-       int intervalValidData;
-       u8 flags;
-} adslAtucIntvlInfo;
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-typedef struct adslAtucInvtlExtInfo
- {
-  int ifIndex;
-  int IntervalNumber;
-  u32 adslAtucIntervalFastR;
-  u32 adslAtucIntervalFailedFastR;
-  u32 adslAtucIntervalSesL;
-  u32 adslAtucIntervalUasL;
-  u32  flags;
-} adslAtucInvtlExtInfo;
-#endif
-//ioctl(int fd, GET_ADSL_ATUR_INTVL_INFO, void *struct_adslAturInvtlInfo)
-
-typedef struct adslAturIntvlInfo {
-       int ifIndex;
-        int IntervalNumber;
-       PerfIntervalCount intervalLOF;
-       PerfIntervalCount intervalLOS;
-       PerfIntervalCount intervalLPR;
-       PerfIntervalCount intervalES;
-       int intervalValidData;
-       u8 flags;
-} adslAturIntvlInfo;
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-typedef struct adslAturInvtlExtInfo
- {
-  int ifIndex;
-  int IntervalNumber;
-  u32 adslAturIntervalSesL;
-  u32 adslAturIntervalUasL;
-  u32  flags;
-} adslAturInvtlExtInfo;
-#endif
-//ioctl(int fd, GET_ADSL_ATUC_CHAN_PERF_DATA,  void *struct_atucChannelPerfDataEntry)
-
-typedef struct atucChannelPerfDataEntry
-{
-   int                 ifIndex;
-   u32                         adslAtucChanReceivedBlks;             
-   u32                         adslAtucChanTransmittedBlks;             
-   u32                         adslAtucChanCorrectedBlks;                 
-   u32                         adslAtucChanUncorrectBlks;
-   int                         adslAtucChanPerfValidIntervals;
-   int                         adslAtucChanPerfInvalidIntervals;
-   AdslPerfTimeElapsed         adslAtucChanPerfCurr15MinTimeElapsed;
-   PerfCurrentCount    adslAtucChanPerfCurr15MinReceivedBlks;
-   PerfCurrentCount    adslAtucChanPerfCurr15MinTransmittedBlks;
-   PerfCurrentCount    adslAtucChanPerfCurr15MinCorrectedBlks;
-   PerfCurrentCount    adslAtucChanPerfCurr15MinUncorrectBlks;
-   AdslPerfTimeElapsed  adslAtucChanPerfCurr1DayTimeElapsed;
-   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayReceivedBlks;
-   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayTransmittedBlks;
-   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayCorrectedBlks;
-   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayUncorrectBlks;
-   int                  adslAtucChanPerfPrev1DayMoniSecs;
-   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayReceivedBlks;
-   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayTransmittedBlks;
-   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayCorrectedBlks;
-   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayUncorrectBlks;
-   u32                 flags;
-}atucChannelPerfDataEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_CHAN_PERF_DATA,  void *struct_aturChannelPerfDataEntry)
-
-typedef struct aturChannelPerfDataEntry
-{
-   int                 ifIndex;
-   u32                         adslAturChanReceivedBlks;             
-   u32                         adslAturChanTransmittedBlks;             
-   u32                         adslAturChanCorrectedBlks;                 
-   u32                         adslAturChanUncorrectBlks;
-   int                         adslAturChanPerfValidIntervals;
-   int                         adslAturChanPerfInvalidIntervals;
-   AdslPerfTimeElapsed         adslAturChanPerfCurr15MinTimeElapsed;
-   PerfCurrentCount    adslAturChanPerfCurr15MinReceivedBlks;
-   PerfCurrentCount    adslAturChanPerfCurr15MinTransmittedBlks;
-   PerfCurrentCount    adslAturChanPerfCurr15MinCorrectedBlks;
-   PerfCurrentCount    adslAturChanPerfCurr15MinUncorrectBlks;
-   AdslPerfTimeElapsed  adslAturChanPerfCurr1DayTimeElapsed;
-   AdslPerfCurrDayCount adslAturChanPerfCurr1DayReceivedBlks;
-   AdslPerfCurrDayCount adslAturChanPerfCurr1DayTransmittedBlks;
-   AdslPerfCurrDayCount adslAturChanPerfCurr1DayCorrectedBlks;
-   AdslPerfCurrDayCount adslAturChanPerfCurr1DayUncorrectBlks;
-   int                  adslAturChanPerfPrev1DayMoniSecs;
-   AdslPerfPrevDayCount adslAturChanPerfPrev1DayReceivedBlks;
-   AdslPerfPrevDayCount adslAturChanPerfPrev1DayTransmittedBlks;
-   AdslPerfPrevDayCount adslAturChanPerfPrev1DayCorrectedBlks;
-   AdslPerfPrevDayCount adslAturChanPerfPrev1DayUncorrectBlks;
-   u32                 flags;
-} aturChannelPerfDataEntry;
-
-
-//ioctl(int fd, GET_ADSL_ATUC_CHAN_INTVL_INFO, void *struct_adslAtucChanIntvlInfo)
-
-typedef struct adslAtucChanIntvlInfo {
-       int ifIndex;
-        int IntervalNumber;
-       PerfIntervalCount chanIntervalRecvdBlks;
-       PerfIntervalCount chanIntervalXmitBlks;
-       PerfIntervalCount chanIntervalCorrectedBlks;
-       PerfIntervalCount chanIntervalUncorrectBlks;
-       int intervalValidData;
-       u8 flags;
-} adslAtucChanIntvlInfo;
-
-
-//ioctl(int fd, GET_ADSL_ATUR_CHAN_INTVL_INFO, void *struct_adslAturChanIntvlInfo)
-
-typedef struct adslAturChanIntvlInfo {
-       int ifIndex;
-        int IntervalNumber;
-       PerfIntervalCount chanIntervalRecvdBlks;
-       PerfIntervalCount chanIntervalXmitBlks;
-       PerfIntervalCount chanIntervalCorrectedBlks;
-       PerfIntervalCount chanIntervalUncorrectBlks;
-       int intervalValidData;
-       u8 flags;
-} adslAturChanIntvlInfo;
-
-
-//ioctl(int fd, GET_ADSL_ALRM_CONF_PROF,  void *struct_adslLineAlarmConfProfileEntry)
-//ioctl(int fd, SET_ADSL_ALRM_CONF_PROF,  void *struct_adslLineAlarmConfProfileEntry)
-
-typedef struct  adslLineAlarmConfProfileEntry
- {
-  unsigned char adslLineAlarmConfProfileName[32];
-    int        adslAtucThresh15MinLofs;
-    int        adslAtucThresh15MinLoss;
-    int        adslAtucThresh15MinESs;
-    u32        adslAtucThreshFastRateUp;
-    u32        adslAtucThreshInterleaveRateUp;
-    u32        adslAtucThreshFastRateDown;
-    u32        adslAtucThreshInterleaveRateDown;
-    int        adslAtucInitFailureTrapEnable;
-    int        adslAturThresh15MinLofs;
-    int        adslAturThresh15MinLoss;
-    int        adslAturThresh15MinLprs;
-    int        adslAturThresh15MinESs;
-    u32        adslAturThreshFastRateUp;
-    u32        adslAturThreshInterleaveRateUp;
-    u32        adslAturThreshFastRateDown;
-    u32        adslAturThreshInterleaveRateDown;
-    int        adslLineAlarmConfProfileRowStatus;
-    u32        flags;
-} adslLineAlarmConfProfileEntry;
-
-#ifdef IFXMIPS_MEI_MIB_RFC3440
-typedef struct adslLineAlarmConfProfileExtEntry
- {
-  u8  adslLineAlarmConfProfileExtName[32];
-  u32 adslAtucThreshold15MinFailedFastR;
-  u32 adslAtucThreshold15MinSesL;
-  u32 adslAtucThreshold15MinUasL;
-  u32 adslAturThreshold15MinSesL;
-  u32 adslAturThreshold15MinUasL;
-  u32  flags;
-} adslLineAlarmConfProfileExtEntry;
-#endif
-//TRAPS
-
-/* The following Data Sturctures are added to support the WEB related parameters for ADSL Statistics */
-typedef struct  adslLineStatus
- {
-    int        adslModemStatus;
-    u32        adslModeSelected;
-    int        adslAtucThresh15MinESs;
-    int        adslTrellisCodeEnable;
-    int        adslLatency;
-    u8 flags;
- } adslLineStatusInfo;
-
-typedef struct  adslLineRate
- {
-    u32        adslDataRateds;
-    u32        adslDataRateus;
-    u32        adslATTNDRds;   
-    u32        adslATTNDRus;   
-    u8         flags;
- } adslLineRateInfo;
-
-typedef struct  adslLineInfo
- {
-    u32        adslInterleaveDepthds;
-    u32        adslInterleaveDepthus;
-    u32        adslLATNds;
-    u32        adslLATNus;
-    u32        adslSATNds;
-    u32        adslSATNus;
-    int                adslSNRMds;
-    int                adslSNRMus;
-    int                adslACATPds;
-    int                adslACATPus;
-    u32        flags;
- } adslLineInfo;
-
-typedef struct  adslNearEndPerfStats
- {
-    u32        adslSuperFrames; 
-    u32        adslneLOS;
-    u32        adslneLOF;
-    u32        adslneLPR;
-    u32        adslneNCD;
-    u32        adslneLCD;
-    u32        adslneCRC;
-    u32                adslneRSCorr;
-    u32                adslneFECS;
-    u32                adslneES;
-    u32                adslneSES;
-    u32                adslneLOSS;
-    u32                adslneUAS;
-    u32                adslneHECErrors;
-    u32                flags;
- } adslNearEndPerfStats;
-
-typedef struct  adslFarEndPerfStats
- {
-    u32        adslfeLOS;
-    u32        adslfeLOF;
-    u32        adslfeLPR;
-    u32        adslfeNCD;
-    u32        adslfeLCD;
-    u32        adslfeCRC;
-    u32                adslfeRSCorr;
-    u32                adslfeFECS;
-    u32                adslfeES;
-    u32                adslfeSES;
-    u32                adslfeLOSS;
-    u32                adslfeUAS;
-    u32                adslfeHECErrors;
-    u32                flags;
- } adslFarEndPerfStats;
-
-/* The number of tones (and hence indexes) is dependent on the ADSL mode - G.992.1, G.992.2, G.992.3, * G.992.4 and G.992.5 */
-typedef struct adslATURSubcarrierInfo {
-       int     ifindex;
-       u16     HLINSCds;
-       u16     HLINpsds[1024];/* Even index = real part; Odd Index
-                                   = imaginary part for each tone */
-       u16     HLOGMTds;
-       u16     HLOGpsds[512];
-       u16     QLNMTds;
-       u16     QLNpsds[512];
-       u16     SNRMTds;
-       u16     SNRpsds[512];  
-       u16     BITpsds[512];
-       s16     GAINpsds[512]; /* Signed value in 0.1dB units. i.e dB * 10.
-                               Needs to be converted into linear scale*/
-       u16     flags;
-}adslATURSubcarrierInfo;
-
-typedef struct adslATUCSubcarrierInfo {
-       int     ifindex;
-       u16     HLINSCus;
-       u16     HLINpsus[128];/* Even index = real part; Odd Index
-                                   = imaginary part for each tone */
-       u16     HLOGMTus;
-       u16     HLOGpsus[64];
-       u16     QLNMTus;
-       u16     QLNpsus[64]; 
-       u16     SNRMTus;
-       u16     SNRpsus[64];  
-       u16     BITpsus[64];
-       s16     GAINpsus[64]; /* Signed value in 0.1dB units. i.e dB * 10.
-                               Needs to be converted into linear scale*/
-       u16     flags;
-}adslATUCSubcarrierInfo;
-
-#ifndef u_int16
-#define u_int16 u16
-#endif
-
-typedef struct adslInitStats {
-       u_int16 FullInitializationCount;
-       u_int16 FailedFullInitializationCount;
-       u_int16 LINIT_Errors;
-       u_int16 Init_Timeouts;
-}adslInitStats;
-
-typedef struct adslPowerSpectralDensity {
-       int     ACTPSDds;
-       int     ACTPSDus;
-}adslPowerSpectralDensity;
-
-//ioctl(int fd, ADSL_ATUR_TRAPS, void  *uint16_flags)
-typedef union structpts {
-       adslLineTableEntry * adslLineTableEntry_pt;
-       adslAtucPhysEntry * adslAtucPhysEntry_pt;
-       adslAturPhysEntry * adslAturPhysEntry_pt;
-       adslAtucChanInfo * adslAtucChanInfo_pt;
-       adslAturChanInfo * adslAturChanInfo_pt;
-       atucPerfDataEntry * atucPerfDataEntry_pt;
-       aturPerfDataEntry * aturPerfDataEntry_pt;
-       adslAtucIntvlInfo * adslAtucIntvlInfo_pt;
-       adslAturIntvlInfo * adslAturIntvlInfo_pt;
-       atucChannelPerfDataEntry * atucChannelPerfDataEntry_pt;
-       aturChannelPerfDataEntry * aturChannelPerfDataEntry_pt;
-       adslAtucChanIntvlInfo * adslAtucChanIntvlInfo_pt;
-       adslAturChanIntvlInfo * adslAturChanIntvlInfo_pt;
-       adslLineAlarmConfProfileEntry * adslLineAlarmConfProfileEntry_pt;
-       // RFC 3440
-       
-    #ifdef IFXMIPS_MEI_MIB_RFC3440
-       adslLineExtTableEntry * adslLineExtTableEntry_pt;
-       atucPerfDataExtEntry * atucPerfDataExtEntry_pt;
-       adslAtucInvtlExtInfo * adslAtucInvtlExtInfo_pt;
-       aturPerfDataExtEntry * aturPerfDataExtEntry_pt;
-       adslAturInvtlExtInfo * adslAturInvtlExtInfo_pt;
-       adslLineAlarmConfProfileExtEntry * adslLineAlarmConfProfileExtEntry_pt;
-    #endif 
-       adslLineStatusInfo      * adslLineStatusInfo_pt;
-       adslLineRateInfo        * adslLineRateInfo_pt;
-       adslLineInfo            * adslLineInfo_pt;
-       adslNearEndPerfStats    * adslNearEndPerfStats_pt;
-       adslFarEndPerfStats     * adslFarEndPerfStats_pt;
-       adslATUCSubcarrierInfo  * adslATUCSubcarrierInfo_pt;
-       adslATURSubcarrierInfo  * adslATURSubcarrierInfo_pt;
-       adslPowerSpectralDensity * adslPowerSpectralDensity_pt;
-}structpts;
-
-#endif /* ] __IFXMIPS_MEI_APP_IOCTL_H */
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_bsp.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_bsp.h
deleted file mode 100644 (file)
index c346620..0000000
+++ /dev/null
@@ -1,308 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME    : ifxmips_mei_bsp.h
-** PROJECT      : Danube
-** MODULES      : MEI
-**
-** DATE         : 1 Jan 2006
-** AUTHOR       : TC Chen
-** DESCRIPTION  : MEI Driver
-** COPYRIGHT    :       Copyright (c) 2006
-**                      Infineon Technologies AG
-**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-**    This program is free software; you can redistribute it and/or modify
-**    it under the terms of the GNU General Public License as published by
-**    the Free Software Foundation; either version 2 of the License, or
-**    (at your option) any later version.
-**
-** HISTORY
-** $Version $Date      $Author     $Comment
-*******************************************************************************/
-#ifndef _IFXMIPS_MEI_BSP_H_
-#define _IFXMIPS_MEI_BSP_H_
-
-/***   Register address offsets, relative to MEI_SPACE_ADDRESS ***/
-#define MEI_DATA_XFR_OFFSET                            (0x0000)
-#define        MEI_VERSION_OFFSET                              (0x0004)
-#define        MEI_ARC_GP_STAT_OFFSET                          (0x0008)
-#define MEI_DATA_XFR_STAT_OFFSET                       (0x000C)
-#define        MEI_XFR_ADDR_OFFSET                             (0x0010)
-#define MEI_MAX_WAIT_OFFSET                            (0x0014)
-#define        MEI_TO_ARC_INT_OFFSET                           (0x0018)
-#define        ARC_TO_MEI_INT_OFFSET                           (0x001C)
-#define        ARC_TO_MEI_INT_MASK_OFFSET                      (0x0020)
-#define        MEI_DEBUG_WAD_OFFSET                            (0x0024)
-#define MEI_DEBUG_RAD_OFFSET                           (0x0028)
-#define        MEI_DEBUG_DATA_OFFSET                           (0x002C)
-#define        MEI_DEBUG_DEC_OFFSET                            (0x0030)
-#define MEI_CONFIG_OFFSET                              (0x0034)
-#define        MEI_RST_CONTROL_OFFSET                          (0x0038)
-#define        MEI_DBG_MASTER_OFFSET                           (0x003C)
-#define        MEI_CLK_CONTROL_OFFSET                          (0x0040)
-#define        MEI_BIST_CONTROL_OFFSET                         (0x0044)
-#define        MEI_BIST_STAT_OFFSET                            (0x0048)
-#define MEI_XDATA_BASE_SH_OFFSET                       (0x004c)
-#define MEI_XDATA_BASE_OFFSET                          (0x0050)
-#define MEI_XMEM_BAR_BASE_OFFSET                       (0x0054)
-#define MEI_XMEM_BAR0_OFFSET                           (0x0054)
-#define MEI_XMEM_BAR1_OFFSET                           (0x0058)
-#define MEI_XMEM_BAR2_OFFSET                           (0x005C)
-#define MEI_XMEM_BAR3_OFFSET                           (0x0060)
-#define MEI_XMEM_BAR4_OFFSET                           (0x0064)
-#define MEI_XMEM_BAR5_OFFSET                           (0x0068)
-#define MEI_XMEM_BAR6_OFFSET                           (0x006C))
-#define MEI_XMEM_BAR7_OFFSET                           (0x0070)
-#define MEI_XMEM_BAR8_OFFSET                           (0x0074)
-#define MEI_XMEM_BAR9_OFFSET                           (0x0078)
-#define MEI_XMEM_BAR10_OFFSET                          (0x007C)
-#define MEI_XMEM_BAR11_OFFSET                          (0x0080)
-#define MEI_XMEM_BAR12_OFFSET                          (0x0084)
-#define MEI_XMEM_BAR13_OFFSET                          (0x0088)
-#define MEI_XMEM_BAR14_OFFSET                          (0x008C)
-#define MEI_XMEM_BAR15_OFFSET                          (0x0090)
-#define MEI_XMEM_BAR16_OFFSET                          (0x0094)
-
-#define WHILE_DELAY 20000
-/*
-**     Define where in ME Processor's memory map the Stratify chip lives
-*/
-
-#define MAXSWAPSIZE            8 * 1024        //8k *(32bits)
-
-//      Mailboxes
-#define MSG_LENGTH             16      // x16 bits
-#define YES_REPLY                      1
-#define NO_REPLY               0
-
-#define CMV_TIMEOUT            1000    //jiffies
-
-//  Block size per BAR
-#define SDRAM_SEGMENT_SIZE     (64*1024)
-// Number of Bar registers
-#define MAX_BAR_REGISTERS      (17)
-
-#define XDATA_REGISTER         (15)
-
-#define IFXMIPS_MEI_IOCTL_CMV_WINHOST          IFX_ADSL_IOC_CMV_WINHOST
-
-#define IFXMIPS_MEI_IOCTL_CMV_READ             IFX_ADSL_IOC_CMV_READ
-#define IFXMIPS_MEI_IOCTL_CMV_WRITE            IFX_ADSL_IOC_CMV_WRITE
-
-#define IFXMIPS_MEI_IOCTL_GET_BASE_ADDRESS     IFX_ADSL_IOC_GET_BASE_ADDRESS
-
-// ARC register addresss
-#define ARC_STATUS                             0x0
-#define ARC_LP_START                           0x2
-#define ARC_LP_END                             0x3
-#define ARC_DEBUG                              0x5
-#define ARC_INT_MASK                           0x10A
-
-#define IRAM0_BASE                             (0x00000)
-#define IRAM1_BASE                             (0x04000)
-#define BRAM_BASE                              (0x0A000)
-
-#define ADSL_BASE                              (0x20000)
-#define CRI_BASE                               (ADSL_BASE + 0x11F00)
-#define CRI_CCR0                               (CRI_BASE + 0x00)
-#define CRI_RST                                        (CRI_BASE + 0x04*4)
-#define ADSL_DILV_BASE                                 (ADSL_BASE+0x20000)
-
-//
-#define IRAM0_ADDR_BIT_MASK   0xFFF
-#define IRAM1_ADDR_BIT_MASK   0xFFF
-#define BRAM_ADDR_BIT_MASK    0xFFF
-#define RX_DILV_ADDR_BIT_MASK 0x1FFF
-
-/***  Bit definitions ***/
-
-#define FALSE  0
-#define TRUE   1
-#define BIT0   1<<0
-#define BIT1   1<<1
-#define BIT2   1<<2
-#define BIT3   1<<3
-#define BIT4   1<<4
-#define BIT5   1<<5
-#define BIT6   1<<6
-#define BIT7   1<<7
-#define BIT8   1<<8
-#define BIT9   1<<9
-#define BIT10  1<<10
-#define BIT11  1<<11
-#define BIT12  1<<12
-#define BIT13  1<<13
-#define BIT14  1<<14
-#define BIT15  1<<15
-#define BIT16  1<<16
-#define BIT17  1<<17
-#define BIT18  1<<18
-#define BIT19  1<<19
-#define BIT20  1<<20
-#define BIT21  1<<21
-#define BIT22  1<<22
-#define BIT23  1<<23
-#define BIT24  1<<24
-#define BIT25  1<<25
-#define BIT26  1<<26
-#define BIT27  1<<27
-#define BIT28  1<<28
-#define BIT29  1<<29
-#define BIT30  1<<30
-#define BIT31  1<<31
-
-// CRI_CCR0 Register definitions
-#define CLK_2M_MODE_ENABLE                     BIT6
-#define        ACL_CLK_MODE_ENABLE                     BIT4
-#define FDF_CLK_MODE_ENABLE                    BIT2
-#define STM_CLK_MODE_ENABLE                    BIT0
-
-// CRI_RST Register definitions
-#define FDF_SRST                               BIT3
-#define MTE_SRST                               BIT2
-#define FCI_SRST                               BIT1
-#define AAI_SRST                               BIT0
-
-//      MEI_TO_ARC_INTERRUPT Register definitions
-#define        MEI_TO_ARC_INT1                 BIT3
-#define        MEI_TO_ARC_INT0                 BIT2
-#define MEI_TO_ARC_CS_DONE             BIT1    //need to check
-#define        MEI_TO_ARC_MSGAV                BIT0
-
-//      ARC_TO_MEI_INTERRUPT Register definitions
-#define        ARC_TO_MEI_INT1                 BIT8
-#define        ARC_TO_MEI_INT0                 BIT7
-#define        ARC_TO_MEI_CS_REQ               BIT6
-#define        ARC_TO_MEI_DBG_DONE             BIT5
-#define        ARC_TO_MEI_MSGACK               BIT4
-#define        ARC_TO_MEI_NO_ACCESS            BIT3
-#define        ARC_TO_MEI_CHECK_AAITX          BIT2
-#define        ARC_TO_MEI_CHECK_AAIRX          BIT1
-#define        ARC_TO_MEI_MSGAV                BIT0
-
-//      ARC_TO_MEI_INTERRUPT_MASK Register definitions
-#define        GP_INT1_EN                      BIT8
-#define        GP_INT0_EN                      BIT7
-#define        CS_REQ_EN                       BIT6
-#define        DBG_DONE_EN                     BIT5
-#define        MSGACK_EN                       BIT4
-#define        NO_ACC_EN                       BIT3
-#define        AAITX_EN                        BIT2
-#define        AAIRX_EN                        BIT1
-#define        MSGAV_EN                        BIT0
-
-#define        MEI_SOFT_RESET                  BIT0
-
-#define        HOST_MSTR                       BIT0
-
-#define JTAG_MASTER_MODE               0x0
-#define MEI_MASTER_MODE                        HOST_MSTR
-
-//      MEI_DEBUG_DECODE Register definitions
-#define MEI_DEBUG_DEC_MASK             (0x3)
-#define MEI_DEBUG_DEC_AUX_MASK         (0x0)
-#define MEI_DEBUG_DEC_DMP1_MASK                (0x1)
-#define MEI_DEBUG_DEC_DMP2_MASK                (0x2)
-#define MEI_DEBUG_DEC_CORE_MASK         (0x3)
-
-#define AUX_STATUS                     (0x0)
-//      ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
-//      page swap requests.
-#define MEI_TO_ARC_MAILBOX             (0xDFD0)
-#define MEI_TO_ARC_MAILBOXR            (MEI_TO_ARC_MAILBOX + 0x2C)
-
-#define        ARC_TO_MEI_MAILBOX              (0xDFA0)
-#define ARC_MEI_MAILBOXR               (ARC_TO_MEI_MAILBOX + 0x2C)
-
-// Codeswap request messages are indicated by setting BIT31
-#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK     (0x80000000)
-
-// Clear Eoc messages received are indicated by setting BIT17 
-#define OMB_CLEAREOC_INTERRUPT_CODE    (0x00020000)
-
-/*
-**     Swap page header
-*/
-//      Page must be loaded at boot time if size field has BIT31 set
-#define BOOT_FLAG      (BIT31)
-#define BOOT_FLAG_MASK ~BOOT_FLAG
-
-#define FREE_RELOAD            1
-#define FREE_SHOWTIME          2
-#define FREE_ALL               3
-
-// marcos
-#define        IFXMIPS_WRITE_REGISTER_L(data,addr)     do{ *((volatile u32*)(addr)) = (u32)(data);} while (0)
-#define IFXMIPS_READ_REGISTER_L(addr)  (*((volatile u32*)(addr)))
-#define SET_BIT(reg, mask)                  reg |= (mask)
-#define CLEAR_BIT(reg, mask)                reg &= (~mask)
-#define CLEAR_BITS(reg, mask)               CLEAR_BIT(reg, mask)
-#define SET_BITS(reg, mask)                 SET_BIT(reg, mask)
-#define SET_BITFIELD(reg, mask, off, val)   {reg &= (~mask); reg |= (val << off);}
-
-#define ALIGN_SIZE                         ( 1L<<10 )  //1K size align
-#define MEM_ALIGN(addr)                    (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) )
-
-// swap marco
-#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);}
-#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);}
-
-//      Swap page header describes size in 32-bit words, load location, and image offset
-//      for program and/or data segments
-typedef struct _arc_swp_page_hdr {
-       u32 p_offset;           //Offset bytes of progseg from beginning of image
-       u32 p_dest;             //Destination addr of progseg on processor
-       u32 p_size;             //Size in 32-bitwords of program segment
-       u32 d_offset;           //Offset bytes of dataseg from beginning of image
-       u32 d_dest;             //Destination addr of dataseg on processor
-       u32 d_size;             //Size in 32-bitwords of data segment
-} ARC_SWP_PAGE_HDR;
-
-/*
-**     Swap image header
-*/
-#define GET_PROG       0       //      Flag used for program mem segment
-#define GET_DATA       1       //      Flag used for data mem segment
-
-//      Image header contains size of image, checksum for image, and count of
-//      page headers. Following that are 'count' page headers followed by
-//      the code and/or data segments to be loaded
-typedef struct _arc_img_hdr {
-       u32 size;               //      Size of binary image in bytes
-       u32 checksum;           //      Checksum for image
-       u32 count;              //      Count of swp pages in image
-       ARC_SWP_PAGE_HDR page[1];       //      Should be "count" pages - '1' to make compiler happy
-} ARC_IMG_HDR;
-
-typedef struct smmu_mem_info {
-       int type;
-       unsigned long nCopy;
-       unsigned long size;
-       unsigned char *address;
-       unsigned char *org_address;
-} smmu_mem_info_t;
-
-typedef struct ifxmips_mei_device_private {
-       int modem_ready;
-       int arcmsgav;
-       int cmv_reply;
-       int cmv_waiting;
-       // Mei to ARC CMV count, reply count, ARC Indicator count       
-       int indicator_count;
-       int cmv_count;
-       int reply_count;
-       unsigned long image_size;
-       int nBar;
-       u16 Recent_indicator[MSG_LENGTH];
-
-       u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4)));
-
-       smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS];
-       ARC_IMG_HDR *img_hdr;
-       //  to wait for arc cmv reply, sleep on wait_queue_arcmsgav;
-       wait_queue_head_t wait_queue_arcmsgav;
-       wait_queue_head_t wait_queue_modemready;
-       MEI_mutex_t mei_cmv_sema;
-} ifxmips_mei_device_private_t;
-
-#endif //_IFXMIPS_MEI_BSP_H_
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_ioctl.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_ioctl.h
deleted file mode 100644 (file)
index d11f04e..0000000
+++ /dev/null
@@ -1,734 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME    : ifxmips_mei_ioctl.h
-** PROJECT      : Danube
-** MODULES      : MEI
-**
-** DATE         : 1 Jan 2006
-** AUTHOR       : TC Chen
-** DESCRIPTION  : MEI Driver
-** COPYRIGHT    :       Copyright (c) 2006
-**                      Infineon Technologies AG
-**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-**    This program is free software; you can redistribute it and/or modify
-**    it under the terms of the GNU General Public License as published by
-**    the Free Software Foundation; either version 2 of the License, or
-**    (at your option) any later version.
-**
-** HISTORY
-** $Version $Date      $Author     $Comment
-*******************************************************************************/
-#ifndef         _IFXMIPS_MEI_IOCTL_H
-#define                _IFXMIPS_MEI_IOCTL_H
-
-/////////////////////////////////////////////////////////////////////////////////////////////////////
-#define PCM_BUFF_SIZE          1024    //bytes
-//  interrupt numbers
-
-#if !(defined(_IFXMIPS_ADSL_APP) || defined (_AMAZON_ADSL_APP))
-
-// Number of intervals
-#define INTERVAL_NUM                                   192     //two days
-typedef struct ifxmips_mei_mib {
-       struct list_head list;
-       struct timeval start_time;      //start of current interval
-
-       int AtucPerfLof;
-       int AtucPerfLos;
-       int AtucPerfEs;
-       int AtucPerfInit;
-
-       int AturPerfLof;
-       int AturPerfLos;
-       int AturPerfLpr;
-       int AturPerfEs;
-
-       int AturChanPerfRxBlk;
-       int AturChanPerfTxBlk;
-       int AturChanPerfCorrBlk;
-       int AturChanPerfUncorrBlk;
-
-       //RFC-3440
-       int AtucPerfStatFastR;
-       int AtucPerfStatFailedFastR;
-       int AtucPerfStatSesL;
-       int AtucPerfStatUasL;
-       int AturPerfStatSesL;
-       int AturPerfStatUasL;
-} ifxmips_mei_mib;
-
-typedef struct adslChanPrevTxRate {
-       u32 adslAtucChanPrevTxRate;
-       u32 adslAturChanPrevTxRate;
-} adslChanPrevTxRate;
-
-typedef struct adslPhysCurrStatus {
-       u32 adslAtucCurrStatus;
-       u32 adslAturCurrStatus;
-} adslPhysCurrStatus;
-
-typedef struct ChanType {
-       int interleave;
-       int fast;
-       int bearchannel0;
-       int bearchannel1;
-} ChanType;
-
-typedef struct mib_previous_read {
-       u16 ATUC_PERF_ESS;
-       u16 ATUR_PERF_ESS;
-       u32 ATUR_CHAN_RECV_BLK;
-       u16 ATUR_CHAN_CORR_BLK_INTL;
-       u16 ATUR_CHAN_CORR_BLK_FAST;
-       u16 ATUR_CHAN_UNCORR_BLK_INTL;
-       u16 ATUR_CHAN_UNCORR_BLK_FAST;
-       u16 ATUC_PERF_STAT_FASTR;
-       u16 ATUC_PERF_STAT_FAILED_FASTR;
-       u16 ATUC_PERF_STAT_SESL;
-       u16 ATUC_PERF_STAT_UASL;
-       u16 ATUR_PERF_STAT_SESL;
-} mib_previous_read;
-
-typedef struct mib_flags_pretime {
-       struct timeval ATUC_PERF_LOSS_PTIME;
-       struct timeval ATUC_PERF_LOFS_PTIME;
-       struct timeval ATUR_PERF_LOSS_PTIME;
-       struct timeval ATUR_PERF_LOFS_PTIME;
-       struct timeval ATUR_PERF_LPR_PTIME;
-} mib_flags_pretime;
-
-               //  cmv message structures
-#define        MP_PAYLOAD_SIZE                                 12
-typedef struct mpmessage {
-       u16 iFunction;
-       u16 iGroup;
-       u16 iAddress;
-       u16 iIndex;
-       u16 iPayload[MP_PAYLOAD_SIZE];
-} MPMessage;
-#endif
-
-typedef struct meireg {
-       u32 iAddress;
-       u32 iData;
-} meireg;
-
-#define MEIDEBUG_BUFFER_SIZES 50
-typedef struct meidebug {
-       u32 iAddress;
-       u32 iCount;
-       u32 buffer[MEIDEBUG_BUFFER_SIZES];
-} meidebug;
-
-//==============================================================================
-// Group definitions                                                              
-//==============================================================================
-#define OPTN                    5
-#define CNFG                    8
-#define CNTL                    1
-#define STAT                    2
-#define RATE                    6
-#define PLAM                    7
-#define INFO                    3
-#define TEST                   4
-//==============================================================================
-// Opcode definitions
-//==============================================================================
-#define H2D_CMV_READ                            0x00
-#define H2D_CMV_WRITE                           0x04
-#define H2D_CMV_INDICATE_REPLY                  0x10
-#define H2D_ERROR_OPCODE_UNKNOWN               0x20
-#define H2D_ERROR_CMV_UNKNOWN                  0x30
-
-#define D2H_CMV_READ_REPLY                             0x01
-#define D2H_CMV_WRITE_REPLY                     0x05
-#define D2H_CMV_INDICATE                        0x11
-#define D2H_ERROR_OPCODE_UNKNOWN                0x21
-#define D2H_ERROR_CMV_UNKNOWN                   0x31
-#define D2H_ERROR_CMV_READ_NOT_AVAILABLE        0x41
-#define D2H_ERROR_CMV_WRITE_ONLY                0x51
-#define D2H_ERROR_CMV_READ_ONLY                 0x61
-
-#define H2D_DEBUG_READ_DM                       0x02
-#define H2D_DEBUG_READ_PM                       0x06
-#define H2D_DEBUG_WRITE_DM                      0x0a
-#define H2D_DEBUG_WRITE_PM                      0x0e
-
-#define D2H_DEBUG_READ_DM_REPLY                0x03
-#define D2H_DEBUG_READ_FM_REPLY                0x07
-#define D2H_DEBUG_WRITE_DM_REPLY               0x0b
-#define D2H_DEBUG_WRITE_FM_REPLY               0x0f
-#define D2H_ERROR_ADDR_UNKNOWN                 0x33
-
-#define D2H_AUTONOMOUS_MODEM_READY_MSG         0xf1
-//==============================================================================
-// INFO register address field definitions
-//==============================================================================
-
-#define INFO_TxState                                   0
-#define INFO_RxState                                   1
-#define INFO_TxNextState                               2
-#define INFO_RxNextState                               3
-#define INFO_TxStateJumpFrom                           4
-#define INFO_RxStateJumpFrom                           5
-
-#define INFO_ReverbSnrBuf                              8
-#define INFO_ReverbEchoSnrBuf                          9
-#define INFO_MedleySnrBuf                              10
-#define INFO_RxShowtimeSnrBuf                          11
-#define INFO_DECdelay                                  12
-#define INFO_DECExponent                               13
-#define INFO_DECTaps                                   14
-#define INFO_AECdelay                                  15
-#define INFO_AECExponent                               16
-#define INFO_AECTaps                                   17
-#define INFO_TDQExponent                               18
-#define INFO_TDQTaps                                   19
-#define INFO_FDQExponent                               20
-#define INFO_FDQTaps                                   21
-#define INFO_USBat                                     22
-#define INFO_DSBat                                     23
-#define INFO_USFineGains                               24
-#define INFO_DSFineGains                               25
-#define INFO_BitloadFirstChannel                       26
-#define INFO_BitloadLastChannel                                27
-#define INFO_PollEOCData                               28      // CO specific
-#define INFO_CSNRMargin                                        29      // CO specific
-#define INFO_RCMsgs1                                   30
-#define INFO_RMsgs1                                    31
-#define INFO_RMsgRA                                    32
-#define INFO_RCMsgRA                                   33
-#define INFO_RMsg2                                     34
-#define INFO_RCMsg2                                    35
-#define INFO_BitLoadOK                                 36
-#define INFO_RCRates1                                  37
-#define INFO_RRates1Tab                                        38
-#define INFO_RMsgs1Tab                                 39
-#define INFO_RMsgRATab                                 40
-#define INFO_RRatesRA                                  41
-#define INFO_RCRatesRA                                 42
-#define INFO_RRates2                                   43
-#define INFO_RCRates2                                  44
-#define INFO_PackedRMsg2                               45
-#define INFO_RxBitSwapFlag                             46
-#define INFO_TxBitSwapFlag                             47
-#define INFO_ShowtimeSNRUpdateCount                    48
-#define INFO_ShowtimeFDQUpdateCount                    49
-#define INFO_ShowtimeDECUpdateCount                    50
-#define INFO_CopyRxBuffer                              51
-#define INFO_RxToneBuf                                 52
-#define INFO_TxToneBuf                                  53
-#define INFO_Version                                   54
-#define INFO_TimeStamp                                  55
-#define INFO_feVendorID                                        56
-#define INFO_feSerialNum                               57
-#define INFO_feVersionNum                              58
-#define INFO_BulkMemory                                        59      //Points to start of bulk memory
-#define INFO_neVendorID                                 60
-#define INFO_neVersionNum                              61
-#define INFO_neSerialNum                               62
-
-//==============================================================================
-// RATE register address field definitions
-//==============================================================================
-
-#define RATE_UsRate                                    0
-#define RATE_DsRate                                    1
-
-//==============================================================================
-// PLAM (Physical Layer Management) register address field definitions
-//      (See G997.1 for reference)
-//==============================================================================
-
-       //                                      ///
-       // Failure Flags        ///
-       //                                      ///
-
-#define PLAM_NearEndFailureFlags               0
-#define PLAM_FarEndFailureFlags                        1
-
-       //                                                                      ///
-       // Near End Failure Flags Bit Definitions       ///
-       //                                                                      ///
-
-// ADSL Failures ///
-#define PLAM_LOS_FailureBit                            0x0001
-#define PLAM_LOF_FailureBit                            0x0002
-#define PLAM_LPR_FailureBit                            0x0004
-#define PLAM_RFI_FailureBit                            0x0008
-
-// ATM Failures ///
-#define PLAM_NCD_LP0_FailureBit                                0x0010
-#define PLAM_NCD_LP1_FailureBit                                0x0020
-#define PLAM_LCD_LP0_FailureBit                                0x0040
-#define PLAM_LCD_LP1_FailureBit                                0x0080
-
-#define PLAM_NCD_BC0_FailureBit                                0x0100
-#define PLAM_NCD_BC1_FailureBit                                0x0200
-#define PLAM_LCD_BC0_FailureBit                                0x0400
-#define PLAM_LCD_BC1_FailureBit                                0x0800
-       //                                              ///
-       // Performance Counts   ///
-       //                                              ///
-
-#define PLAM_NearEndCrcCnt                             2
-#define PLAM_CorrectedRSErrors                         3
-
-#define PLAM_NearEndECSCnt                             6
-#define PLAM_NearEndESCnt                              7
-#define PLAM_NearEndSESCnt                             8
-#define PLAM_NearEndLOSSCnt                            9
-#define PLAM_NearEndUASLCnt                            10
-
-#define PLAM_NearEndHECErrCnt                          11
-
-#define PLAM_NearEndHECTotCnt                          16
-#define PLAM_NearEndCellTotCnt                         18
-#define PLAM_NearEndSfCntLSW                           20
-#define PLAM_NearEndSfCntMSW                           21
-
-#define PLAM_FarEndFebeCnt                             24
-
-#define PLAM_FarEndFecCnt                              28
-
-#define PLAM_FarEndFECSCnt                             32
-#define PLAM_FarEndESCnt                               33
-#define PLAM_FarEndSESCnt                              34
-#define PLAM_FarEndLOSSCnt                             35
-#define PLAM_FarEndUASLCnt                             36
-
-#define PLAM_FarEndHECErrCnt                           37
-
-#define PLAM_FarEndHECTotCnt                           41
-
-#define PLAM_FarEndCellTotCnt                          43
-
-#define PLAM_SNRMargin_0_1db                           45
-
-#define PLAM_SNRMargin                                 46
-
-//==============================================================================
-// CNTL register address and bit field definitions
-//==============================================================================
-
-#define CNTL_ModemControl                              0
-
-#define CNTL_ModemReset                                        0x0
-#define CNTL_ModemStart                                        0x2
-
-//==============================================================================
-// STAT register address and bit field definitions
-//==============================================================================
-
-#define STAT_MacroState                                        0
-#define STAT_Mode                                      1
-#define STAT_DMTFramingMode                            2
-#define STAT_SleepState                                        3
-#define STAT_Misc                                      4
-#define STAT_FailureState                              5
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // STAT_OLRStatus provides status of OLR
- //16-bit STAT_OLRStatus_DS
- //  [1:0]      :       OLR status 00=IDLE,  01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
- //  [3:2]:             Reserved
- //  [5:4]:             OLR_Type (1:bitswap; 2: DRR; 3: SRA)
- //  [7:6]:             Reserved
- //  [10:8]:            >0=Request. 0=not.   For DS, # of request transmissions/retransmissions (3 bits).
- //  [11]:              1=Receive Response, 0=not
- //  [15:12]:   Reserved
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- ///
-#define STAT_OLRStatus_DS                              6
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // STAT_OLRStatus provides status of OLR
- // 16-bit STAT_OLRStatus_US CMV
- //  [1:0]      :       OLR status 00=IDLE,  01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
- //  [3:2]:             Reserved
- //  [5:4]:             OLR_Type (1:bitswap; 2: DRR; 3: SRA)
- //  [7:6]:             Reserved
- //  [8]:               1=Request Received. 0=not.
- //  [10:9]:     Reserved
- //  [11]:              1=Response Sent, 0=not
- //  [15:12]:   Reserved
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-///
-#define STAT_OLRStatus_US                              7
-
-////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // STAT_PMStatus provides status of PM
- // 16-bit STAT_PMStatus CMV
- //  [1:0]      :       PM Status 00=IDLE,  01=PM_IN_PROGRESS, 10=PM_Completed, 11=PM_Aborted
- //  [2] :              0=ATU_R initiated PM; 1 = ATU_C initiated PM
- //  [3]:               Reserved
- //  [5:4]:             PM_Type (1:Simple Request; 2: L2 request; 3: L2 trim)
- //  [7:6]:             Reserved
- //  [10:8]:            >0=Request. 0=not.   # of request transmissions/retransmissions (3 bits).
- //  [11]:              1=Response, 0=not
- //  [15:12]:   Reserved
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- ///
-#define STAT_PMStatus                                  8
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- // 16-bit STAT_OLRError_DS, STAT_OLRError_US, STAT_PMError
- // [3:0]:          OLR/PM response reason code
- // [7:4]:             OLR/PM Internal error code
- // [15:8]:         OLR/PM Reserved for future
- //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
- ///
-#define STAT_OLRError_DS                               9
-#define STAT_OLRError_US                               10
-#define STAT_PMError                                   11
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_MacroState
-// MacroState reflects the high level state of the modem
-
-#define STAT_InitState                         0x0000
-#define STAT_ReadyState                                0x0001
-#define STAT_FailState                         0x0002
-#define STAT_IdleState                         0x0003
-#define STAT_QuietState                                0x0004
-#define STAT_GhsState                          0x0005
-#define STAT_FullInitState                     0x0006
-#define STAT_ShowTimeState                     0x0007
-#define STAT_FastRetrainState                  0x0008
-#define STAT_LoopDiagMode                      0x0009
-#define STAT_ShortInit                         0x000A  // Bis short initialization ///
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_Mode
-// ConfigurationMode indicates the mode of the current ADSL Link. In general, a modem may use
-// G.Hs or some other mechanism to negotiate the specific mode of operation.
-// The OPTN_modeControl CMV is used to select a set of desired modes.
-// The STAT_Mode CMV indicates which mode was actually selected.
-
-#define STAT_ConfigMode_T1413                  0x0001
-#define STAT_ConfigMode_G992_2_AB              0x0002
-#define STAT_ConfigMode_G992_1_A               0x0004
-#define STAT_ConfigMode_G992_1_B               0x0008
-#define STAT_ConfigMode_G992_1_C               0x0010
-#define STAT_ConfigMode_G992_2_C               0x0020
-
-#define STAT_ConfigMode_G992_3_A               0x0100
-#define STAT_ConfigMode_G992_3_B               0x0200
-#define STAT_ConfigMode_G992_3_I               0x0400
-#define STAT_ConfigMode_G992_3_J               0x0800
-#define STAT_ConfigMode_G992_3_L               0x1000
-
-#define STAT_ConfigMode_G992_4_A               0x2000
-#define STAT_ConfigMode_G992_4_I               0x4000
-
-#define STAT_ConfigMode_G992_5                 0x8000
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_DMTFramingMode
-// FramingMode indicates the DMT framing mde negotiated during initialization. The framing mode
-// status is not applicable in BIS mode and its value is undefined
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define STAT_FramingModeMask                   0x0003
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_Misc
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define STAT_OverlappedSpectrum                0x0008
-#define STAT_TCM                       0x0010
-#define STAT_TDQ_at_1104               0x0020
-#define STAT_T1413_Signal_Detected     0x0040
-#define STAT_AnnexL_US_Mask1_PSD       0x1000  //indicate we actually selected G992.3 AnnexL US PSD mask1
-#define STAT_AnnexL_US_Mask2_PSD       0x2000  //indicate we actually selected G992.3 AnnexL US PSD mask2
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// STAT_FailureState
-// when the MacroSTate indicates the fail state, FailureState provides a failure code
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define E_CODE_NO_ERROR                                                                0
-#define E_CODE_BAT_TX                                                          1       // TX BAT table is incorrect */
-#define E_CODE_BAT_RX                                                          2       //  RX BAT table is incorrect */
-#define E_CODE_PROFILE                                                         3       //  profile is not selected in fast retrain */
-#define E_CODE_TX_AOC_FIFO_OVERFLOW                                            4
-#define E_CODE_TRUNCATE_FR                                                     5       //Fast Retrain truncated due to no stored profiles*/
-#define E_CODE_BITLOAD                                                         6       //  bit loading fails */
-#define E_CODE_ST_ERROR                                                                7       //  showtime CRC error */
-#define E_CODE_RESERVED                                                                8       //  using parameters reserved by the ITU-T */
-#define E_CODE_C_TONES                                                         9       //  detected C_TONES */
-#define E_CODE_CODESWAP_ERR                                                    10      //  codeswap not finished in time */
-#define E_CODE_FIFO_OVERFLOW                                                   11      // we have run out of fifo space */
-#define E_CODE_C_BG_DECODE_ERR                                                 12      // error in decoding C-BG message */
-#define E_CODE_C_RATES2_DECODE_ERR                                             13      // error in decoding C-MSGS2 and C-RATES2 */
-#define E_CODE_RCMedleyRx_C_SEGUE2_Failure                                     14      //  Timeout after RCMedleyRx waiting for C_SEGUE2 */
-#define E_CODE_RReverbRATx_C_SEGUE2_Failure                                    15      //  Timeout after RReverbRATx waiting for C_SEGUE2 */
-#define E_CODE_RReverb3Tx_C_SEGUE1_Failure                                     16      //  Timeout after RReverb3Tx waiting for C_SEGUE1 */
-#define E_CODE_RCCRC2Rx_C_RATES1_DECOD_ERR                                     17      //  Received CRC not equal to computed CRC */
-#define E_CODE_RCCRC1Rx_C_RATES1_DECOD_ERR                                     18      //  Received CRC not equal to computed CRC */
-#define E_CODE_RReverb5Tx_C_SEGUE2_Failure                                     19      //  Timeout after RReverb5Tx waiting for C_SEGUE2 */
-#define E_CODE_RReverb6Tx_C_SEGUE3_Failure                                     20      //  Timeout after RReverb6Tx waiting for C_SEGUE3 */
-#define E_CODE_RSegue5Tx_C_SEGUE3_Failure                                      21      //  Timeout after RSegue5Tx waiting for C_SEGUE3 */
-#define E_CODE_RCReverb5Rx_C_SEGUE_Failure                                     22      //  Timeout after RCReverb5Rx waiting for C_SEGUE */
-#define E_CODE_RCReverbRARx_C_SEGUE2_Failure                                   23      //  Timeout after RCReverbRARx waiting for C_SEGUE2 */
-#define E_CODE_RCCRC4Rx_CMSGS2_DECOD_ERR                                       24      //  Received CRC not equal to computed CRC */
-#define E_CODE_RCCRC5Rx_C_BG_DECOD_ERR                                         25      //  Received CRC not equal to computed CRC */
-#define E_CODE_RCCRC3Rx_DECOD_ERR                                              26      //  Received CRC not equal to computed CRC */
-#define E_CODE_RCPilot3_DEC_PATH_DEL_TIMEOUT                                   27      //  DEC Path Delay timeout */
-#define E_CODE_RCPilot3_DEC_TRAINING_TIMEOUT                                   28      //  DEC Training timeout */
-#define E_CODE_RCReverb3Rx_C_SEGUE1_Failure                                    29      //  Timeout after RCReverb3Rx waiting for C_SEGUE1 */
-#define E_CODE_RCReverb2Rx_SignalEnd_Failure                                   30      //  Timeout waiting for the end of RCReverb2Rx signal */
-#define E_CODE_RQuiet2_SignalEnd_Failure                                       31      //  Timeout waiting for the end of RQuiet2 signal */
-#define E_CODE_RCReverbFR1Rx_Failure                                           32      //  Timeout waiting for the end of RCReverbFR1Rx signal */
-#define E_CODE_RCPilotFR1Rx_SignalEnd_Failure                                  33      //  Timeout waiting for the end of RCPilotFR1Rx signal */
-#define E_CODE_RCReverbFR2Rx_C_Segue_Failure                                   34      //  Timeout after RCReverbFR2Rx waiting for C_SEGUE */
-#define E_CODE_RCReverbFR5Rx_SignalEnd_TIMEOUT                                 35      //  Timeout waiting for the end of RCReverbFR5Rx signal */
-#define E_CODE_RCReverbFR6Rx_C_SEGUE_Failure                                   36      //  Timeout after RCReverbFR6Rx waiting for C_SEGUE */
-#define E_CODE_RCReverbFR8Rx_C_SEGUE_FR4_Failure                               37      //  Timeout after RCReverbFR8Rx waiting for C_SEGUE_FR4 */
-#define E_CODE_RCReverbFR8Rx_No_PROFILE                                                38      //  Timeout since no profile was selected */
-#define E_CODE_RCReverbFR8Rx_SignalEnd_TIMEOUT                                 39      //  Timeout waiting for the end of RCReverbFR8Rx signal */
-#define E_CODE_RCCRCFR1_DECOD_ERR                                              40      //  Received CRC not equal to computed CRC */
-#define E_CODE_RCRecovRx_SingnalEnd_TIMEOUT                                    41      //  Timeout waiting for the end of RCRecovRx signal */
-#define E_CODE_RSegueFR5Tx_TX_Not_Ready_TIMEOUT                                        42      //  Timeout after RSegueFR5Tx waiting for C_SEGUE2 */
-#define E_CODE_RRecovTx_SignalEnd_TIMEOUT                                      43      //  Timeout waiting for the end of RRecovTx signal */
-#define E_CODE_RCMedleyFRRx_C_SEGUE2_Failure                                   44      //  Timeout after RCMedleyFRRx waiting for C_SEGUE2 */
-#define E_CODE_CONFIGURATION_PARAMETERS_ERROR                                  45      // one of the configuration parameters do not meet the standard */
-#define E_CODE_BAD_MEM_ACCESS                                                  46
-#define E_CODE_BAD_INSTRUCTION_ACCESS                                          47
-#define E_CODE_TX_EOC_FIFO_OVERFLOW                                            48
-#define E_CODE_RX_EOC_FIFO_OVERFLOW                                            49
-#define E_CODE_GHS_CD_FLAG_TIME_OUT                                            50      // Timeout when transmitting Flag in handshake cleardown */
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//STAT_OLRStatus:
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define STAT_OLRPM_IDLE                                 0x0000
-#define STAT_OLRPM_IN_PROGRESS                          0x0001
-#define STAT_OLRPM_COMPLETE                             0x0002
-#define STAT_OLRPM_ABORTED                              0x0003
-#define STAT_OLRPM_RESPONSE                            0x0800
-
-#define STAT_OLR_BITSWAP                                0x0010
-#define STAT_OLR_DRR                                   0x0020
-#define STAT_OLR_SRA                                   0x0030
-
-//STAT_PMStatus_US:
-#define STAT_PM_CO_REQ                                  0x0004
-#define STAT_PM_SIMPLE_REQ                              0x0010
-#define STAT_PM_L2_REQ                                 0x0020
-#define STAT_PM_L2_TRIM_REQ                            0x0030
-
-// STAT_OLRError_DS, STAT_OLRError_US
-//4 bit response reason code:
-#define RESP_BUSY                                      0x01
-#define RESP_INVALID_PARAMETERS                                0x02
-#define RESP_NOT_ENABLED                               0x03
-#define RESP_NOT_SUPPORTED                             0x04
-
-//4 bit internal error code (common for OLR and PM)
-#define REQ_INVALID_BiGi                               0x10
-#define REQ_INVALID_Lp                                 0x20
-#define REQ_INVALID_Bpn                                        0x30
-#define REQ_INVALID_FRAMING_CONSTRAINT                 0x40
-#define REQ_NOT_IN_L0_STATE                            0x50
-#define REQ_NOT_IN_L2_STATE                            0x60
-#define REQ_INVALID_PCB                                        0x70
-#define REQ_VIOLATES_MARGIN                            0x80
-
-//STAT_PMError
-//4 bit response reason code:
-#define RESP_STATE_NOT_DESIRED                          0x03
-#define RESP_INFEASIBLE_PARAMETERS                      0x04
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN register address and bit field definitions
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_ModeControl                               0
-#define OPTN_DMTLnkCtl                                 1
-// Reserved                                             2
-#define OPTN_GhsControl                                        3
-// Reserved                                             4
-#define OPTN_PwrManControl                             5
-#define OPTN_AnnexControl                              6
-#define OPTN_ModeControl1                              7
-// Reserved                                             8
-#define OPTN_StateMachineCtrl                          9
-// Reserved                                             10
-// Reserved                                             11
-#define OPTN_BisLinkControl                            12
-#define OPTN_ATMAddrConfig                             13
-#define OPTN_ATMNumCellConfig                          14
-
-// Mode control defines the allowable operating modes of an ADSL link. In general, a modem may ///
-// use G.Hs or some other mechanism to negotiate the specific mode of operation. ///
-// The OPTN_ModeControl CMV is used to select a set of desired modes ///
-// The STAT_ModeControl CMV indicates which mode was actually selected ///
-
-// OPTN_ModeControl
-#define OPTN_ConfigMode_T1413                  0x0001
-#define OPTN_ConfigMode_G992_2_AB              0x0002
-#define OPTN_ConfigMode_G992_1_A               0x0004
-#define OPTN_ConfigMode_G992_1_B               0x0008
-#define OPTN_ConfigMode_G992_1_C               0x0010
-#define OPTN_ConfigMode_G992_2_C               0x0020
-
-#define OPTN_ConfigMode_G992_3_A               0x0100
-#define OPTN_ConfigMode_G992_3_B               0x0200
-#define OPTN_ConfigMode_G992_3_I               0x0400
-#define OPTN_ConfigMode_G992_3_J               0x0800
-#define OPTN_ConfigMode_G992_3_L               0x1000
-
-#define OPTN_ConfigMode_G992_4_A               0x2000
-#define OPTN_ConfigMode_G992_4_I               0x4000
-
-#define OPTN_ConfigMode_G992_5                 0x8000
-
-// OPTN_PwrManControl
-#define OPTN_PwrManWakeUpGhs                   0x1
-#define OPTN_PwrManWakeUpFR                    0x2
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN_DMT Link Control
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-#define OPTN_DMT_DualLatency_Dis                0x200
-#define OPTN_DMT_S_Dis                          0x100
-#define OPTN_DMT_FRAMINGMODE                   0x1
-#define OPTN_DMT_FRAMINGMODE_MASK              0x7
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN_BIS Link Control
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-#define OPTN_BisLinkContrl_LineProbeDis         0x1
-#define OPTN_BisLinkContrl_DSBlackBitsEn        0x2
-#define OPTN_BisLinkContrl_DiagnosticModeEn     0x4
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// OPTN_GhsControl
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//
-// for OPTN_GhsControl, we will assign 16bit word as follows
-// bit 0~3: set the control over which start(initial) message CPE will send:
-//
-//              BIT: 2  1  0
-//                       0  0  1  CLR
-//                       0  1  0  MR
-//                       0  1  1  MS
-//                       1  0  0  MP
-//
-//  // bit 4~6: set the control over which message will be sent when we get at lease one CL/CLR exchange
-//        BIT: 5  4
-//                   0  1  MS
-//                       1  0  MR
-//                       1  1  MP
-//
-//  // bit 15: RT initiated G.hs sample sessions one through eight.  Session one is default.
-//        BIT: 15
-//                        1  means session one
-//
-///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_GHS_ST_GHS                                        0x8000
-#define OPTN_GHS_INIT_MASK                             0x000F
-#define OPTN_GHS_RESP_MASK                             0x00F0
-
-#define OPTN_RTInitTxMsg_CLR                           0x0001
-#define OPTN_RTInitTxMsg_MR                            0x0002
-#define OPTN_RTInitTxMsg_MS                            0x0003
-#define OPTN_RTInitTxMsg_MP                            0x0004
-
-#define OPTN_RTRespTxMsg_MS                            0x0010
-#define OPTN_RTRespTxMsg_MR                            0x0020
-#define OPTN_RTRespTxMsg_MP                            0x0030
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//      OPTN_AnnexControl
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-// G.992.3 Annex A/L1/L2 US PSD Mask preferred
-
-#define OPTN_G992_3_AnnexA_PreferredModeMask           0x3000
-#define OPTN_G992_3_AnnexA_PreferredModeA              0x0000  // default AnnexA PSD mask ///
-#define OPTN_G992_3_AnnexA_PreferredModeL1             0x1000  // AnnexL wide spectrum upstream PSD mask ///
-#define OPTN_G992_3_AnnexA_PreferredModeL2             0x2000  // AnnexL narrow spectrum upstream PSD mask ///
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//OPTN_ATMAddrConfig
-// Bits 4:0             are Utopia address for BC1
-// Bits 9:5             are Utopia address for BC0
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_UTPADDR_BC1                               0x001F
-#define OPTN_UTPADDR_BC0                               0x03E0
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-//OPTN_ATMNumCellConfig
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-#define OPTN_BC1_NUM_CELL_PAGES                                0x000F  // Bits 0:3 ///
-#define OPTN_BC0_NUM_CELL_PAGES                                0x00F0  // Bits 4:7 ///
-
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-// CNFG register address field ///
-//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
-
-///////////////////////////////////////////
-// these cmvs are used by bis handshake ///
-///////////////////////////////////////////
-
-// Each of the CNFG_TPS entries points to a structure of type (TPS_TC_BearerChannel_t)
-#define CNFG_TPS_TC_DS0                                        0
-#define CNFG_TPS_TC_DS1                                        1
-#define CNFG_TPS_TC_US0                                        2
-#define CNFG_TPS_TC_US1                                        3
-
-#define CNFG_HDLC_Overhead_Requirements                        4
-
-// Each of the CNFG_PMS entries points to a structure of type (PMS_TC_LatencyPath_t)
-#define CNFG_PMS_TC_DS0                                        5
-#define CNFG_PMS_TC_DS1                                        6
-#define CNFG_PMS_TC_US0                                        7
-#define CNFG_PMS_TC_US1                                        8
-
-// CNFG_PMD_PARAMETERS points to a structure of type (PMD_params_t)
-#define CNFG_PMD_PARAMETERS                            9
-
-////////////////////////////////////////////////////////////
-// these cmvs are used by bis training and showtime code ///
-////////////////////////////////////////////////////////////
-
-////////////////
-// Tx Config ///
-////////////////
-#define CNFG_tx_Cnfg_Nbc                               10
-#define CNFG_tx_Cnfg_Nlp                               11
-#define CNFG_tx_Cnfg_Rp                                        12
-#define CNFG_tx_Cnfg_Mp                                        13
-#define CNFG_tx_Cnfg_Lp                                        14
-#define CNFG_tx_Cnfg_Tp                                        15
-#define CNFG_tx_Cnfg_Dp                                        16
-#define CNFG_tx_Cnfg_Bpn                               17
-#define CNFG_tx_Cnfg_FramingMode                       18
-#define CNFG_tx_Cnfg_MSGLp                             19
-#define CNFG_tx_Cnfg_MSGc                              20
-
-////////////////
-// Rx Config ///
-////////////////
-#define CNFG_rx_Cnfg_Nbc                               21
-#define CNFG_rx_Cnfg_Nlp                               22
-#define CNFG_rx_Cnfg_Rp                                        23
-#define CNFG_rx_Cnfg_Mp                                        24
-#define CNFG_rx_Cnfg_Lp                                        25
-#define CNFG_rx_Cnfg_Tp                                        26
-#define CNFG_rx_Cnfg_Dp                                        27
-#define CNFG_rx_Cnfg_Bpn                               28
-#define CNFG_rx_Cnfg_FramingMode                       29
-#define CNFG_rx_Cnfg_MSGLp                             30
-#define CNFG_rx_Cnfg_MSGc                              31
-
-#define CNFG_tx_Cnfg_BCnToLPp                          32
-#define CNFG_rx_Cnfg_BCnToLPp                          33
-
-#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_linux.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_linux.h
deleted file mode 100644 (file)
index 79849ae..0000000
+++ /dev/null
@@ -1,112 +0,0 @@
-/******************************************************************************
-**
-** FILE NAME    : ifxmips_mei_linux.h
-** PROJECT      : Danube
-** MODULES      : MEI
-**
-** DATE         : 1 Jan 2006
-** AUTHOR       : TC Chen
-** DESCRIPTION  : MEI Driver
-** COPYRIGHT    :       Copyright (c) 2006
-**                      Infineon Technologies AG
-**                      Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-**    This program is free software; you can redistribute it and/or modify
-**    it under the terms of the GNU General Public License as published by
-**    the Free Software Foundation; either version 2 of the License, or
-**    (at your option) any later version.
-**
-** HISTORY
-** $Version $Date      $Author     $Comment
-*******************************************************************************/
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <asm/semaphore.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <asm/uaccess.h>
-
-#undef CONFIG_DEVFS_FS         //165204:henryhsu devfs will make mei open file fail.
-
-#ifdef CONFIG_DEVFS_FS
-#include <linux/devfs_fs_kernel.h>
-#endif
-#ifdef CONFIG_PROC_FS
-#include <linux/proc_fs.h>
-#endif
-
-#include <linux/list.h>
-#include <linux/delay.h>
-#define __LINUX__
-
-#ifdef CONFIG_PROC_FS
-#define PROC_ITEMS 8
-#define MEI_DIRNAME     "mei"
-#endif
-
-#include <asm/ifxmips/ifxmips.h>
-#include <asm/ifxmips/ifxmips_irq.h>
-#include <asm/ifxmips/ifxmips_mei.h>
-#include <asm/ifxmips/ifxmips_mei_app.h>
-#include <asm/ifxmips/ifxmips_mei_ioctl.h>
-#include <asm/ifxmips/ifxmips_mei_app_ioctl.h>
-#include <asm/ifxmips/ifxmips_gpio.h>
-#include <asm/ifxmips/ifxmips_led.h>
-#include <asm/ifxmips/ifxmips_irq.h>
-
-#ifdef CONFIG_DEVFS_FS
-#define IFXMIPS_DEVNAME  "ifxmips"
-#endif //ifdef CONFIG_DEVFS_FS
-
-#define MEI_LOCKINT(var) \
-        local_save_flags(var);\
-        local_irq_disable()
-#define MEI_UNLOCKINT(var) \
-        local_irq_restore(var)
-
-#define MEI_MUTEX_INIT(id,flag) \
-        sema_init(&id,flag)
-#define MEI_MUTEX_LOCK(id) \
-        down_interruptible(&id)
-#define MEI_MUTEX_UNLOCK(id) \
-        up(&id)
-
-#define MEI_MASK_AND_ACK_IRQ \
-        ifxmips_mask_and_ack_irq
-
-#define MEI_DISABLE_IRQ \
-        disable_irq
-#define MEI_ENABLE_IRQ \
-        enable_irq
-
-#define MEI_WAIT(ms) \
-        {\
-                set_current_state(TASK_INTERRUPTIBLE);\
-                schedule_timeout(ms);\
-        }
-
-#define MEI_INIT_WAKELIST(name,queue) \
-        init_waitqueue_head(&queue)
-
-#define MEI_WAIT_EVENT_TIMEOUT(ev,timeout)\
-        interruptible_sleep_on_timeout(&ev,timeout)
-
-#define MEI_WAIT_EVENT(ev)\
-        interruptible_sleep_on(&ev)
-#define MEI_WAKEUP_EVENT(ev)\
-        wake_up_interruptible(&ev)
-
-typedef unsigned long MEI_intstat_t;
-typedef struct semaphore MEI_mutex_t;
-typedef struct file MEI_file_t;
-typedef struct inode MEI_inode_t;
-
-extern void mask_and_ack_ifxmips_irq (unsigned int irq_nr);
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_pmu.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_pmu.h
deleted file mode 100644 (file)
index c1ba6cb..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-#ifndef _IFXMIPS_PMU_H__
-#define _IFXMIPS_PMU_H__
-
-#define IFXMIPS_PMU_PWDCR_DMA          0x20
-#define IFXMIPS_PMU_PWDCR_LED          0x800
-#define IFXMIPS_PMU_PWDCR_GPT          0x1000
-#define IFXMIPS_PMU_PWDCR_PPE          0x2000
-#define IFXMIPS_PMU_PWDCR_FPI          0x4000
-
-void ifxmips_pmu_enable(unsigned int module);
-void ifxmips_pmu_disable(unsigned int module);
-
-#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_prom.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_prom.h
deleted file mode 100644 (file)
index e640ad7..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- *   Copyright (C) 2008 John Crispin <blogic@openwrt.org>
- */
-#ifndef _IFXPROM_H__
-#define _IFXPROM_H__
-
-extern void prom_printf(const char *fmt, ...);
-extern u32 *prom_get_cp1_base(void);
-extern u32 prom_get_cp1_size(void);
-extern int ifxmips_has_brn_block(void);
-
-#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/gpio.h b/target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/gpio.h
deleted file mode 100644 (file)
index 92adc48..0000000
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- *   include/asm-mips/mach-ifxmips/gpio.h
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#ifndef _IFXMIPS_GPIO_H_
-#define _IFXMIPS_GPIO_H_
-
-#include <asm/ifxmips/ifxmips.h>
-#include <asm/ifxmips/ifxmips_gpio.h>
-
-#define GPIO_TO_PORT(x) ((x > 15) ? (1) : (0))
-#define GPIO_TO_GPIO(x) ((x > 15) ? (x-16) : (x))
-
-static inline int gpio_direction_input(unsigned gpio)
-{
-       ifxmips_port_set_open_drain(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
-       ifxmips_port_clear_altsel0(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
-       ifxmips_port_clear_altsel1(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
-       ifxmips_port_set_dir_in(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
-       return 0;
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-       ifxmips_port_clear_open_drain(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
-       ifxmips_port_clear_altsel0(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
-       ifxmips_port_clear_altsel1(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
-       ifxmips_port_set_dir_out(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
-       return 0;
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-       ifxmips_port_get_input(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
-       return 0;
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-       if (value)
-               ifxmips_port_set_output(GPIO_TO_PORT(gpio), GPIO_TO_GPIO(gpio));
-       else
-               ifxmips_port_clear_output(GPIO_TO_PORT(gpio),
-                       GPIO_TO_GPIO(gpio));
-}
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-       return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-       return 0;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-       return 0;
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-       return 0;
-}
-
-static inline int gpio_get_value_cansleep(unsigned gpio)
-{
-       might_sleep();
-       return gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value_cansleep(unsigned gpio, int value)
-{
-       might_sleep();
-       gpio_set_value(gpio, value);
-}
-
-static inline int gpio_is_valid(int number)
-{
-       return ((unsigned)number) < 8;
-}
-
-#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/irq.h b/target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/irq.h
deleted file mode 100644 (file)
index 80342ae..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *   include/asm-mips/mach-ifxmips/irq.h
- *
- *   This program is free software; you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
- *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *   GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program; if not, write to the Free Software
- *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- *   Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#ifndef __IFXMIPS_IRQ_H
-#define __IFXMIPS_IRQ_H
-
-#define NR_IRQS 256
-#include_next <irq.h>
-
-#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/war.h b/target/linux/ifxmips/files/include/asm-mips/mach-ifxmips/war.h
deleted file mode 100644 (file)
index de3584e..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#ifndef __ASM_MIPS_MACH_IFXMIPS_WAR_H
-#define __ASM_MIPS_MACH_IFXMIPS_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR     0
-#define R4600_V1_HIT_CACHEOP_WAR        0
-#define R4600_V2_HIT_CACHEOP_WAR        0
-#define R5432_CP0_INTERRUPT_WAR         0
-#define BCM1250_M3_WAR                  0
-#define SIBYTE_1956_WAR                 0
-#define MIPS4K_ICACHE_REFILL_WAR        0
-#define MIPS_CACHE_SYNC_WAR             0
-#define TX49XX_ICACHE_INDEX_INV_WAR     0
-#define RM9000_CDEX_SMP_WAR             0
-#define ICACHE_REFILLS_WORKAROUND_WAR   0
-#define R10000_LLSC_WAR                 0
-#define MIPS34K_MISSED_ITLB_WAR         0
-
-#endif
diff --git a/target/linux/ifxmips/patches-2.6.27/000-mips-bad-intctl.patch b/target/linux/ifxmips/patches-2.6.27/000-mips-bad-intctl.patch
deleted file mode 100644 (file)
index 36f0552..0000000
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -1484,7 +1484,16 @@ void __cpuinit per_cpu_trap_init(void)
-        */
-       if (cpu_has_mips_r2) {
-               cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+              if (!cp0_compare_irq)
-+                      cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-+
-               cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
-+              if (!cp0_perfcount_irq)
-+                      cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
-+
-+              if (arch_fixup_c0_irqs)
-+                      arch_fixup_c0_irqs();
-+
-               if (cp0_perfcount_irq == cp0_compare_irq)
-                       cp0_perfcount_irq = -1;
-       } else {
---- a/include/asm-mips/irq.h
-+++ b/include/asm-mips/irq.h
-@@ -156,8 +156,12 @@ extern void free_irqno(unsigned int irq)
-  * IE7.  Since R2 their number has to be read from the c0_intctl register.
-  */
- #define CP0_LEGACY_COMPARE_IRQ 7
-+#define CP0_LEGACY_PERFCNT_IRQ 7
- extern int cp0_compare_irq;
- extern int cp0_perfcount_irq;
-+extern void __weak arch_fixup_c0_irqs(void);
-+
-+
- #endif /* _ASM_IRQ_H */
diff --git a/target/linux/ifxmips/patches-2.6.27/010-mips_clocksource_init_war.patch b/target/linux/ifxmips/patches-2.6.27/010-mips_clocksource_init_war.patch
deleted file mode 100644 (file)
index ac44c30..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -21,6 +21,22 @@
- #ifndef CONFIG_MIPS_MT_SMTC
-+/*
-+ * Compare interrupt can be routed and latched outside the core,
-+ * so a single execution hazard barrier may not be enough to give
-+ * it time to clear as seen in the Cause register.  4 time the
-+ * pipeline depth seems reasonably conservative, and empirically
-+ * works better in configurations with high CPU/bus clock ratios.
-+ */
-+
-+#define compare_change_hazard() \
-+      do { \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+      } while (0)
-+
- static int mips_next_event(unsigned long delta,
-                            struct clock_event_device *evt)
- {
-@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long
-       cnt = read_c0_count();
-       cnt += delta;
-       write_c0_compare(cnt);
-+      compare_change_hazard();
-       res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
-       return res;
- }
diff --git a/target/linux/ifxmips/patches-2.6.27/100-board.patch b/target/linux/ifxmips/patches-2.6.27/100-board.patch
deleted file mode 100644 (file)
index b45c1c4..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -78,6 +78,23 @@ config MIPS_COBALT
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select GENERIC_HARDIRQS_NO__DO_IRQ
-+config IFXMIPS
-+      bool "Infineon Twinpass, Danube, Amazon-SE"
-+      select DMA_NONCOHERENT
-+      select IRQ_CPU
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_CPU_MIPS32_R2
-+      select HAVE_STD_PC_SERIAL_PORT
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select SYS_SUPPORTS_MULTITHREADING
-+      select SYS_HAS_EARLY_PRINTK
-+      select HW_HAS_PCI
-+      select GENERIC_GPIO
-+      select SWAP_IO_SPACE
-+
- config MACH_DECSTATION
-       bool "DECstations"
-       select BOOT_ELF32
-@@ -607,6 +624,7 @@ source "arch/mips/sgi-ip27/Kconfig"
- source "arch/mips/sibyte/Kconfig"
- source "arch/mips/txx9/Kconfig"
- source "arch/mips/vr41xx/Kconfig"
-+source "arch/mips/ifxmips/Kconfig"
- endmenu
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -283,6 +283,13 @@ cflags-$(CONFIG_MIPS_COBALT)      += -Iinclud
- load-$(CONFIG_MIPS_COBALT)    += 0xffffffff80080000
- #
-+# Infineon IFXMIPS
-+#
-+core-$(CONFIG_IFXMIPS) += arch/mips/ifxmips/
-+cflags-$(CONFIG_IFXMIPS)   += -Iinclude/asm-mips/mach-ifxmips
-+load-$(CONFIG_IFXMIPS) += 0xffffffff80002000
-+
-+#
- # DECstation family
- #
- core-$(CONFIG_MACH_DECSTATION)        += arch/mips/dec/
---- a/include/asm-mips/bootinfo.h
-+++ b/include/asm-mips/bootinfo.h
-@@ -57,6 +57,12 @@
- #define       MACH_MIKROTIK_RB532     0       /* Mikrotik RouterBoard 532     */
- #define MACH_MIKROTIK_RB532A  1       /* Mikrotik RouterBoard 532A    */
-+/*
-+ * Valid machtype for group IFXMIPS
-+ */
-+#define MACH_GROUP_IFXMIPS     29
-+#define MACH_INFINEON_IFXMIPS  0
-+
- #define CL_SIZE                       COMMAND_LINE_SIZE
- extern char *system_type;
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -51,3 +51,4 @@ obj-$(CONFIG_VICTOR_MPC30X)  += fixup-mpc
- obj-$(CONFIG_ZAO_CAPCELLA)    += fixup-capcella.o
- obj-$(CONFIG_WR_PPMC)         += fixup-wrppmc.o
- obj-$(CONFIG_MIKROTIK_RB532)  += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
-+obj-$(CONFIG_IFXMIPS)         += pci-ifxmips.o ops-ifxmips.o
diff --git a/target/linux/ifxmips/patches-2.6.27/110-drivers.patch b/target/linux/ifxmips/patches-2.6.27/110-drivers.patch
deleted file mode 100644 (file)
index 9382c8b..0000000
+++ /dev/null
@@ -1,152 +0,0 @@
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -112,6 +112,10 @@ obj-$(CONFIG_PS3_FLASH)           += ps3flash.o
- obj-$(CONFIG_JS_RTC)          += js-rtc.o
- js-rtc-y = rtc.o
-+obj-$(CONFIG_IFXMIPS_SSC)  += ifxmips_ssc.o
-+obj-$(CONFIG_IFXMIPS_EEPROM)   += ifxmips_eeprom.o
-+obj-$(CONFIG_IFXMIPS_MEI)  += ifxmips_mei_core.o
-+
- # Files generated that shall be removed upon make clean
- clean-files := consolemap_deftbl.c defkeymap.c
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -56,6 +56,7 @@ obj-$(CONFIG_MTD_WALNUT)        += walnu
- obj-$(CONFIG_MTD_H720X)               += h720x-flash.o
- obj-$(CONFIG_MTD_SBC8240)     += sbc8240.o
- obj-$(CONFIG_MTD_NOR_TOTO)    += omap-toto-flash.o
-+obj-$(CONFIG_MTD_IFXMIPS)     += ifxmips.o
- obj-$(CONFIG_MTD_IXP4XX)      += ixp4xx.o
- obj-$(CONFIG_MTD_IXP2000)     += ixp2000.o
- obj-$(CONFIG_MTD_WRSBC8260)   += wr_sbc82xx_flash.o
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -343,6 +343,12 @@ config MACB
- source "drivers/net/arm/Kconfig"
-+config IFXMIPS_MII0
-+      tristate "Infineon IFXMips eth0 driver"
-+      depends on IFXMIPS
-+      help
-+        Support for the MII0 inside the IFXMips SOC
-+
- config AX88796
-       tristate "ASIX AX88796 NE2000 clone support"
-       depends on ARM || MIPS || SUPERH
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -1353,6 +1353,14 @@ config SERIAL_OF_PLATFORM
-         Currently, only 8250 compatible ports are supported, but
-         others can easily be added.
-+config SERIAL_IFXMIPS
-+      bool "IFXMips serial driver"
-+      depends on IFXMIPS
-+      select SERIAL_CORE
-+      select SERIAL_CORE_CONSOLE
-+      help
-+        Driver for the ifxmipss built in ASC hardware
-+
- config SERIAL_QE
-       tristate "Freescale QUICC Engine serial port support"
-       depends on QUICC_ENGINE
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -69,3 +69,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s
- obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
- obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
- obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
-+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -102,6 +102,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o
- # PARISC Architecture
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -256,4 +256,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/
- obj-$(CONFIG_NIU) += niu.o
- obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
- obj-$(CONFIG_SFC) += sfc/
--
-+obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW
-         If you say N, all options in this submenu will be skipped and disabled.
- if CRYPTO_HW
-+config CRYPTO_DEV_IFXMIPS
-+      tristate "Support for IFXMIPS Data Encryption Unit"
-+      depends on IFXMIPS
- config CRYPTO_DEV_PADLOCK
-       tristate "Support for VIA PadLock ACE"
---- a/drivers/crypto/Makefile
-+++ b/drivers/crypto/Makefile
-@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-
- obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
- obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
- obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
-+obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -305,3 +305,10 @@ config SUPERH_ON_CHIP_R8A66597
-       help
-          This driver enables support for the on-chip R8A66597 in the
-          SH7366 and SH7723 processors.
-+
-+config USB_DWC_HCD
-+      tristate "IFXMIPS USB Host Controller Driver"
-+      depends on USB && IFXMIPS
-+      default y
-+      help
-+       Danube USB Host Controller
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -169,6 +169,12 @@ config LEDS_PCA955X
-         LED driver chips accessed via the I2C bus.  Supported
-         devices include PCA9550, PCA9551, PCA9552, and PCA9553.
-+config LEDS_IFXMIPS
-+      tristate "LED Support for IFXMIPS  LEDs"
-+      depends on LEDS_CLASS && IFXMIPS
-+      help
-+        This option enables support for the CM-X270 LEDs.
-+
- comment "LED Triggers"
- config LEDS_TRIGGERS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_LEDS_CLEVO_MAIL)                += leds-c
- obj-$(CONFIG_LEDS_HP6XX)              += leds-hp6xx.o
- obj-$(CONFIG_LEDS_FSG)                        += leds-fsg.o
- obj-$(CONFIG_LEDS_PCA955X)            += leds-pca955x.o
-+obj-$(CONFIG_LEDS_IFXMIPS)            += leds-ifxmips.o
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)      += ledtrig-timer.o
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -704,6 +704,12 @@ config TXX9_WDT
-       help
-         Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
-+config IFXMIPS_WDT
-+      bool "IFXMips watchdog"
-+      depends on IFXMIPS
-+      help
-+        Hardware driver for the IFXMIPS Watchdog Timer.
-+
- # PARISC Architecture
- # POWERPC Architecture
diff --git a/target/linux/ifxmips/patches-2.6.27/160-cfi-swap.patch b/target/linux/ifxmips/patches-2.6.27/160-cfi-swap.patch
deleted file mode 100644 (file)
index 9010c4b..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1025,7 +1025,9 @@ static int __xipram do_write_oneword(str
-       int retry_cnt = 0;
-       adr += chip->start;
--
-+#ifdef CONFIG_IFXMIPS
-+      adr ^= 2;
-+#endif
-       spin_lock(chip->mutex);
-       ret = get_chip(map, chip, adr, FL_WRITING);
-       if (ret) {
diff --git a/target/linux/ifxmips/patches-2.6.27/170-dma_hack.patch b/target/linux/ifxmips/patches-2.6.27/170-dma_hack.patch
deleted file mode 100644 (file)
index 5416b6a..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -51,6 +51,8 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_wback);
-+EXPORT_SYMBOL(_dma_cache_inv);
- #endif /* CONFIG_DMA_NONCOHERENT */
diff --git a/target/linux/ifxmips/patches-2.6.27/200-genirq_fix.patch b/target/linux/ifxmips/patches-2.6.27/200-genirq_fix.patch
deleted file mode 100644 (file)
index ba63723..0000000
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/kernel/irq/chip.c
-+++ b/kernel/irq/chip.c
-@@ -526,6 +526,9 @@ handle_percpu_irq(unsigned int irq, stru
-       kstat_this_cpu.irqs[irq]++;
-+      if (unlikely(!desc->action || (desc->status & IRQ_DISABLED)))
-+              return;
-+
-       if (desc->chip->ack)
-               desc->chip->ack(irq);
diff --git a/target/linux/ifxmips/patches-2.6.28/000-mips-bad-intctl.patch b/target/linux/ifxmips/patches-2.6.28/000-mips-bad-intctl.patch
deleted file mode 100644 (file)
index 22f7e0c..0000000
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -1514,7 +1514,16 @@ void __cpuinit per_cpu_trap_init(void)
-        */
-       if (cpu_has_mips_r2) {
-               cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+              if (!cp0_compare_irq)
-+                      cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-+
-               cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
-+              if (!cp0_perfcount_irq)
-+                      cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
-+
-+              if (arch_fixup_c0_irqs)
-+                      arch_fixup_c0_irqs();
-+
-               if (cp0_perfcount_irq == cp0_compare_irq)
-                       cp0_perfcount_irq = -1;
-       } else {
---- a/arch/mips/include/asm/irq.h
-+++ b/arch/mips/include/asm/irq.h
-@@ -156,8 +156,12 @@ extern void free_irqno(unsigned int irq)
-  * IE7.  Since R2 their number has to be read from the c0_intctl register.
-  */
- #define CP0_LEGACY_COMPARE_IRQ 7
-+#define CP0_LEGACY_PERFCNT_IRQ 7
- extern int cp0_compare_irq;
- extern int cp0_perfcount_irq;
-+extern void __weak arch_fixup_c0_irqs(void);
-+
-+
- #endif /* _ASM_IRQ_H */
diff --git a/target/linux/ifxmips/patches-2.6.28/010-mips_clocksource_init_war.patch b/target/linux/ifxmips/patches-2.6.28/010-mips_clocksource_init_war.patch
deleted file mode 100644 (file)
index ac44c30..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -21,6 +21,22 @@
- #ifndef CONFIG_MIPS_MT_SMTC
-+/*
-+ * Compare interrupt can be routed and latched outside the core,
-+ * so a single execution hazard barrier may not be enough to give
-+ * it time to clear as seen in the Cause register.  4 time the
-+ * pipeline depth seems reasonably conservative, and empirically
-+ * works better in configurations with high CPU/bus clock ratios.
-+ */
-+
-+#define compare_change_hazard() \
-+      do { \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+      } while (0)
-+
- static int mips_next_event(unsigned long delta,
-                            struct clock_event_device *evt)
- {
-@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long
-       cnt = read_c0_count();
-       cnt += delta;
-       write_c0_compare(cnt);
-+      compare_change_hazard();
-       res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
-       return res;
- }
diff --git a/target/linux/ifxmips/patches-2.6.28/100-board.patch b/target/linux/ifxmips/patches-2.6.28/100-board.patch
deleted file mode 100644 (file)
index 39bda41..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -79,6 +79,22 @@ config MIPS_COBALT
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select GENERIC_HARDIRQS_NO__DO_IRQ
-+config IFXMIPS
-+      bool "Infineon Twinpass, Danube, Amazon-SE"
-+      select DMA_NONCOHERENT
-+      select IRQ_CPU
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_CPU_MIPS32_R2
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select SYS_HAS_EARLY_PRINTK
-+      select HW_HAS_PCI
-+      select GENERIC_GPIO
-+      select SWAP_IO_SPACE
-+      select GENERIC_HARDIRQS_NO__DO_IRQ
-+
- config MACH_DECSTATION
-       bool "DECstations"
-       select BOOT_ELF32
-@@ -607,6 +623,7 @@ source "arch/mips/sgi-ip27/Kconfig"
- source "arch/mips/sibyte/Kconfig"
- source "arch/mips/txx9/Kconfig"
- source "arch/mips/vr41xx/Kconfig"
-+source "arch/mips/ifxmips/Kconfig"
- endmenu
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -285,6 +285,13 @@ cflags-$(CONFIG_MIPS_COBALT)      += -I$(srct
- load-$(CONFIG_MIPS_COBALT)    += 0xffffffff80080000
- #
-+# Infineon IFXMIPS
-+#
-+core-$(CONFIG_IFXMIPS)                += arch/mips/ifxmips/
-+cflags-$(CONFIG_IFXMIPS)      += -I$(srctree)/arch/mips/include/asm/mach-ifxmips
-+load-$(CONFIG_IFXMIPS)                += 0xffffffff80002000
-+
-+#
- # DECstation family
- #
- core-$(CONFIG_MACH_DECSTATION)        += arch/mips/dec/
---- a/arch/mips/include/asm/bootinfo.h
-+++ b/arch/mips/include/asm/bootinfo.h
-@@ -57,6 +57,12 @@
- #define       MACH_MIKROTIK_RB532     0       /* Mikrotik RouterBoard 532     */
- #define MACH_MIKROTIK_RB532A  1       /* Mikrotik RouterBoard 532A    */
-+/*
-+ * Valid machtype for group IFXMIPS
-+ */
-+#define MACH_GROUP_IFXMIPS     29
-+#define MACH_INFINEON_IFXMIPS  0
-+
- #define CL_SIZE                       COMMAND_LINE_SIZE
- extern char *system_type;
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -52,3 +52,4 @@ obj-$(CONFIG_VICTOR_MPC30X)  += fixup-mpc
- obj-$(CONFIG_ZAO_CAPCELLA)    += fixup-capcella.o
- obj-$(CONFIG_WR_PPMC)         += fixup-wrppmc.o
- obj-$(CONFIG_MIKROTIK_RB532)  += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
-+obj-$(CONFIG_IFXMIPS)         += pci-ifxmips.o ops-ifxmips.o
diff --git a/target/linux/ifxmips/patches-2.6.28/110-drivers.patch b/target/linux/ifxmips/patches-2.6.28/110-drivers.patch
deleted file mode 100644 (file)
index 23ceb3c..0000000
+++ /dev/null
@@ -1,152 +0,0 @@
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -110,6 +110,10 @@ obj-$(CONFIG_PS3_FLASH)           += ps3flash.o
- obj-$(CONFIG_JS_RTC)          += js-rtc.o
- js-rtc-y = rtc.o
-+obj-$(CONFIG_IFXMIPS_SSC)  += ifxmips_ssc.o
-+obj-$(CONFIG_IFXMIPS_EEPROM)   += ifxmips_eeprom.o
-+obj-$(CONFIG_IFXMIPS_MEI)  += ifxmips_mei_core.o
-+
- # Files generated that shall be removed upon make clean
- clean-files := consolemap_deftbl.c defkeymap.c
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -52,6 +52,7 @@ obj-$(CONFIG_MTD_NETtel)     += nettel.o
- obj-$(CONFIG_MTD_SCB2_FLASH)  += scb2_flash.o
- obj-$(CONFIG_MTD_H720X)               += h720x-flash.o
- obj-$(CONFIG_MTD_SBC8240)     += sbc8240.o
-+obj-$(CONFIG_MTD_IFXMIPS)     += ifxmips.o
- obj-$(CONFIG_MTD_IXP4XX)      += ixp4xx.o
- obj-$(CONFIG_MTD_IXP2000)     += ixp2000.o
- obj-$(CONFIG_MTD_WRSBC8260)   += wr_sbc82xx_flash.o
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -343,6 +343,12 @@ config MACB
- source "drivers/net/arm/Kconfig"
-+config IFXMIPS_MII0
-+      tristate "Infineon IFXMips eth0 driver"
-+      depends on IFXMIPS
-+      help
-+        Support for the MII0 inside the IFXMips SOC
-+
- config AX88796
-       tristate "ASIX AX88796 NE2000 clone support"
-       depends on ARM || MIPS || SUPERH
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -1304,6 +1304,14 @@ config SERIAL_OF_PLATFORM
-         Currently, only 8250 compatible ports are supported, but
-         others can easily be added.
-+config SERIAL_IFXMIPS
-+      bool "IFXMips serial driver"
-+      depends on IFXMIPS
-+      select SERIAL_CORE
-+      select SERIAL_CORE_CONSOLE
-+      help
-+        Driver for the ifxmipss built in ASC hardware
-+
- config SERIAL_QE
-       tristate "Freescale QUICC Engine serial port support"
-       depends on QUICC_ENGINE
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -73,3 +73,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s
- obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
- obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
- obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
-+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o
- # PARISC Architecture
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -262,4 +262,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/
- obj-$(CONFIG_NIU) += niu.o
- obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
- obj-$(CONFIG_SFC) += sfc/
--
-+obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW
-         If you say N, all options in this submenu will be skipped and disabled.
- if CRYPTO_HW
-+config CRYPTO_DEV_IFXMIPS
-+      tristate "Support for IFXMIPS Data Encryption Unit"
-+      depends on IFXMIPS
- config CRYPTO_DEV_PADLOCK
-       tristate "Support for VIA PadLock ACE"
---- a/drivers/crypto/Makefile
-+++ b/drivers/crypto/Makefile
-@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-
- obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
- obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
- obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
-+obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -321,3 +321,10 @@ config USB_HWA_HCD
-         To compile this driver a module, choose M here: the module
-         will be called "hwa-hc".
-+
-+config USB_DWC_HCD
-+      tristate "IFXMIPS USB Host Controller Driver"
-+      depends on USB && IFXMIPS
-+      default y
-+      help
-+       Danube USB Host Controller
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -171,6 +171,12 @@ config LEDS_DA903X
-         This option enables support for on-chip LED drivers found
-         on Dialog Semiconductor DA9030/DA9034 PMICs.
-+config LEDS_IFXMIPS
-+      tristate "LED Support for IFXMIPS LEDs"
-+      depends on LEDS_CLASS && IFXMIPS
-+      help
-+        This option enables support for the IFXMIPS LEDs.
-+
- comment "LED Triggers"
- config LEDS_TRIGGERS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_LEDS_FSG)                       += leds-fsg.o
- obj-$(CONFIG_LEDS_PCA955X)            += leds-pca955x.o
- obj-$(CONFIG_LEDS_DA903X)             += leds-da903x.o
- obj-$(CONFIG_LEDS_HP_DISK)            += leds-hp-disk.o
-+obj-$(CONFIG_LEDS_IFXMIPS)            += leds-ifxmips.o
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)      += ledtrig-timer.o
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -747,6 +747,12 @@ config TXX9_WDT
-       help
-         Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
-+config IFXMIPS_WDT
-+      bool "IFXMips watchdog"
-+      depends on IFXMIPS
-+      help
-+        Hardware driver for the IFXMIPS Watchdog Timer.
-+
- # PARISC Architecture
- # POWERPC Architecture
diff --git a/target/linux/ifxmips/patches-2.6.28/160-cfi-swap.patch b/target/linux/ifxmips/patches-2.6.28/160-cfi-swap.patch
deleted file mode 100644 (file)
index 53a0db8..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1069,7 +1069,9 @@ static int __xipram do_write_oneword(str
-       int retry_cnt = 0;
-       adr += chip->start;
--
-+#ifdef CONFIG_IFXMIPS
-+      adr ^= 2;
-+#endif
-       spin_lock(chip->mutex);
-       ret = get_chip(map, chip, adr, FL_WRITING);
-       if (ret) {
diff --git a/target/linux/ifxmips/patches-2.6.28/170-dma_hack.patch b/target/linux/ifxmips/patches-2.6.28/170-dma_hack.patch
deleted file mode 100644 (file)
index 5416b6a..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -51,6 +51,8 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_wback);
-+EXPORT_SYMBOL(_dma_cache_inv);
- #endif /* CONFIG_DMA_NONCOHERENT */
diff --git a/target/linux/ifxmips/patches-2.6.28/200-genirq_fix.patch b/target/linux/ifxmips/patches-2.6.28/200-genirq_fix.patch
deleted file mode 100644 (file)
index 2050d1f..0000000
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/kernel/irq/chip.c
-+++ b/kernel/irq/chip.c
-@@ -524,6 +524,9 @@ handle_percpu_irq(unsigned int irq, stru
-       kstat_incr_irqs_this_cpu(irq, desc);
-+      if (unlikely(!desc->action || (desc->status & IRQ_DISABLED)))
-+              return;
-+
-       if (desc->chip->ack)
-               desc->chip->ack(irq);
diff --git a/target/linux/ifxmips/patches-2.6.30/000-mips-bad-intctl.patch b/target/linux/ifxmips/patches-2.6.30/000-mips-bad-intctl.patch
new file mode 100644 (file)
index 0000000..bd1b399
--- /dev/null
@@ -0,0 +1,36 @@
+Index: linux-2.6.30.5/arch/mips/kernel/traps.c
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/kernel/traps.c       2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/arch/mips/kernel/traps.c    2009-09-02 18:23:37.000000000 +0200
+@@ -1542,7 +1542,16 @@
+        */
+       if (cpu_has_mips_r2) {
+               cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
++              if (!cp0_compare_irq)
++                      cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
++
+               cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
++              if (!cp0_perfcount_irq)
++                      cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
++
++              if (arch_fixup_c0_irqs)
++                      arch_fixup_c0_irqs();
++
+               if (cp0_perfcount_irq == cp0_compare_irq)
+                       cp0_perfcount_irq = -1;
+       } else {
+Index: linux-2.6.30.5/arch/mips/include/asm/irq.h
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/include/asm/irq.h    2009-09-02 18:24:49.000000000 +0200
++++ linux-2.6.30.5/arch/mips/include/asm/irq.h 2009-09-02 18:26:05.000000000 +0200
+@@ -157,8 +157,10 @@
+  * IE7.  Since R2 their number has to be read from the c0_intctl register.
+  */
+ #define CP0_LEGACY_COMPARE_IRQ 7
++#define CP0_LEGACY_PERFCNT_IRQ 7
+ extern int cp0_compare_irq;
+ extern int cp0_perfcount_irq;
++extern void __weak arch_fixup_c0_irqs(void);
+ #endif /* _ASM_IRQ_H */
diff --git a/target/linux/ifxmips/patches-2.6.30/010-mips_clocksource_init_war.patch b/target/linux/ifxmips/patches-2.6.30/010-mips_clocksource_init_war.patch
new file mode 100644 (file)
index 0000000..49ff663
--- /dev/null
@@ -0,0 +1,35 @@
+Index: linux-2.6.30.5/arch/mips/kernel/cevt-r4k.c
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/kernel/cevt-r4k.c    2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/arch/mips/kernel/cevt-r4k.c 2009-09-02 18:26:26.000000000 +0200
+@@ -21,6 +21,22 @@
+ #ifndef CONFIG_MIPS_MT_SMTC
++/*
++ * Compare interrupt can be routed and latched outside the core,
++ * so a single execution hazard barrier may not be enough to give
++ * it time to clear as seen in the Cause register.  4 time the
++ * pipeline depth seems reasonably conservative, and empirically
++ * works better in configurations with high CPU/bus clock ratios.
++ */
++
++#define compare_change_hazard() \
++      do { \
++              irq_disable_hazard(); \
++              irq_disable_hazard(); \
++              irq_disable_hazard(); \
++              irq_disable_hazard(); \
++      } while (0)
++
+ static int mips_next_event(unsigned long delta,
+                            struct clock_event_device *evt)
+ {
+@@ -30,6 +46,7 @@
+       cnt = read_c0_count();
+       cnt += delta;
+       write_c0_compare(cnt);
++      compare_change_hazard();
+       res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+       return res;
+ }
diff --git a/target/linux/ifxmips/patches-2.6.30/100-board.patch b/target/linux/ifxmips/patches-2.6.30/100-board.patch
new file mode 100644 (file)
index 0000000..62a683d
--- /dev/null
@@ -0,0 +1,77 @@
+Index: linux-2.6.30.5/arch/mips/Kconfig
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/Kconfig      2009-09-02 22:12:48.000000000 +0200
++++ linux-2.6.30.5/arch/mips/Kconfig   2009-09-03 01:18:31.000000000 +0200
+@@ -79,6 +79,24 @@
+       select SYS_SUPPORTS_64BIT_KERNEL
+       select SYS_SUPPORTS_LITTLE_ENDIAN
++config IFXMIPS
++      bool "Infineon Twinpass, Danube, Amazon-SE"
++      select DMA_NONCOHERENT
++      select IRQ_CPU
++      select CEVT_R4K
++      select CSRC_R4K
++      select SYS_HAS_CPU_MIPS32_R1
++      select SYS_HAS_CPU_MIPS32_R2
++      select HAVE_STD_PC_SERIAL_PORT
++      select SYS_SUPPORTS_BIG_ENDIAN
++      select SYS_SUPPORTS_32BIT_KERNEL
++      select SYS_SUPPORTS_MULTITHREADING
++      select SYS_HAS_EARLY_PRINTK
++      select HW_HAS_PCI
++      select GENERIC_GPIO
++      select ARCH_WANT_OPTIONAL_GPIOLIB
++      select SWAP_IO_SPACE
++
+ config MACH_DECSTATION
+       bool "DECstations"
+       select BOOT_ELF32
+@@ -643,6 +661,7 @@
+ source "arch/mips/txx9/Kconfig"
+ source "arch/mips/vr41xx/Kconfig"
+ source "arch/mips/cavium-octeon/Kconfig"
++source "arch/mips/ifxmips/Kconfig"
+ endmenu
+Index: linux-2.6.30.5/arch/mips/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/Makefile     2009-09-02 22:12:48.000000000 +0200
++++ linux-2.6.30.5/arch/mips/Makefile  2009-09-02 22:12:53.000000000 +0200
+@@ -290,6 +290,13 @@
+ load-$(CONFIG_MIPS_COBALT)    += 0xffffffff80080000
+ #
++# Infineon IFXMIPS
++#
++core-$(CONFIG_IFXMIPS) += arch/mips/ifxmips/
++cflags-$(CONFIG_IFXMIPS)   += -I$(srctree)/arch/mips/include/asm/mach-ifxmips
++load-$(CONFIG_IFXMIPS) += 0xffffffff80002000
++
++#
+ # DECstation family
+ #
+ core-$(CONFIG_MACH_DECSTATION)        += arch/mips/dec/
+Index: linux-2.6.30.5/arch/mips/pci/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/pci/Makefile 2009-09-02 22:12:48.000000000 +0200
++++ linux-2.6.30.5/arch/mips/pci/Makefile      2009-09-02 22:12:53.000000000 +0200
+@@ -52,3 +52,4 @@
+ obj-$(CONFIG_ZAO_CAPCELLA)    += fixup-capcella.o
+ obj-$(CONFIG_WR_PPMC)         += fixup-wrppmc.o
+ obj-$(CONFIG_MIKROTIK_RB532)  += pci-rc32434.o ops-rc32434.o fixup-rc32434.o
++obj-$(CONFIG_IFXMIPS)         += pci-ifxmips.o ops-ifxmips.o
+Index: linux-2.6.30.5/arch/mips/include/asm/bootinfo.h
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/include/asm/bootinfo.h       2009-09-02 22:12:48.000000000 +0200
++++ linux-2.6.30.5/arch/mips/include/asm/bootinfo.h    2009-09-02 22:13:05.000000000 +0200
+@@ -57,6 +57,8 @@
+ #define       MACH_MIKROTIK_RB532     0       /* Mikrotik RouterBoard 532     */
+ #define MACH_MIKROTIK_RB532A  1       /* Mikrotik RouterBoard 532A    */
++#define MACH_INFINEON_IFXMIPS  0
++
+ #define CL_SIZE                       COMMAND_LINE_SIZE
+ extern char *system_type;
diff --git a/target/linux/ifxmips/patches-2.6.30/110-drivers.patch b/target/linux/ifxmips/patches-2.6.30/110-drivers.patch
new file mode 100644 (file)
index 0000000..5d5891d
--- /dev/null
@@ -0,0 +1,162 @@
+Index: linux-2.6.30.5/drivers/char/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/drivers/char/Makefile  2009-09-02 18:22:49.000000000 +0200
++++ linux-2.6.30.5/drivers/char/Makefile       2009-09-02 18:29:51.000000000 +0200
+@@ -112,6 +112,10 @@
+ obj-$(CONFIG_JS_RTC)          += js-rtc.o
+ js-rtc-y = rtc.o
++obj-$(CONFIG_IFXMIPS_SSC)  += ifxmips_ssc.o
++obj-$(CONFIG_IFXMIPS_EEPROM)   += ifxmips_eeprom.o
++obj-$(CONFIG_IFXMIPS_MEI)  += ifxmips_mei_core.o
++
+ # Files generated that shall be removed upon make clean
+ clean-files := consolemap_deftbl.c defkeymap.c
+Index: linux-2.6.30.5/drivers/mtd/maps/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/drivers/mtd/maps/Makefile      2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/mtd/maps/Makefile   2009-09-02 18:30:09.000000000 +0200
+@@ -62,3 +62,4 @@
+ obj-$(CONFIG_MTD_BFIN_ASYNC)  += bfin-async-flash.o
+ obj-$(CONFIG_MTD_RBTX4939)    += rbtx4939-flash.o
+ obj-$(CONFIG_MTD_VMU)         += vmu-flash.o
++obj-$(CONFIG_MTD_IFXMIPS)  += ifxmips.o
+Index: linux-2.6.30.5/drivers/net/Kconfig
+===================================================================
+--- linux-2.6.30.5.orig/drivers/net/Kconfig    2009-09-02 18:22:49.000000000 +0200
++++ linux-2.6.30.5/drivers/net/Kconfig 2009-09-02 18:29:51.000000000 +0200
+@@ -353,6 +353,12 @@
+ source "drivers/net/arm/Kconfig"
++config IFXMIPS_MII0
++      tristate "Infineon IFXMips eth0 driver"
++      depends on IFXMIPS
++      help
++        Support for the MII0 inside the IFXMips SOC
++
+ config AX88796
+       tristate "ASIX AX88796 NE2000 clone support"
+       depends on ARM || MIPS || SUPERH
+Index: linux-2.6.30.5/drivers/serial/Kconfig
+===================================================================
+--- linux-2.6.30.5.orig/drivers/serial/Kconfig 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/serial/Kconfig      2009-09-02 18:29:51.000000000 +0200
+@@ -1365,6 +1365,14 @@
+       help
+         Support for Console on the NWP serial ports.
++config SERIAL_IFXMIPS
++      bool "IFXMips serial driver"
++      depends on IFXMIPS
++      select SERIAL_CORE
++      select SERIAL_CORE_CONSOLE
++      help
++        Driver for the ifxmipss built in ASC hardware
++
+ config SERIAL_QE
+       tristate "Freescale QUICC Engine serial port support"
+       depends on QUICC_ENGINE
+Index: linux-2.6.30.5/drivers/serial/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/drivers/serial/Makefile        2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/serial/Makefile     2009-09-02 18:29:51.000000000 +0200
+@@ -77,3 +77,4 @@
+ obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
+ obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
+ obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
++obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
+Index: linux-2.6.30.5/drivers/watchdog/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/drivers/watchdog/Makefile      2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/watchdog/Makefile   2009-09-02 18:29:51.000000000 +0200
+@@ -105,6 +105,7 @@
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
++obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o
+ # PARISC Architecture
+Index: linux-2.6.30.5/drivers/net/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/drivers/net/Makefile   2009-09-02 18:22:49.000000000 +0200
++++ linux-2.6.30.5/drivers/net/Makefile        2009-09-02 18:30:37.000000000 +0200
+@@ -234,6 +234,7 @@
+ obj-$(CONFIG_MLX4_CORE) += mlx4/
+ obj-$(CONFIG_ENC28J60) += enc28j60.o
+ obj-$(CONFIG_ETHOC) += ethoc.o
++obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o
+ obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o
+Index: linux-2.6.30.5/drivers/crypto/Kconfig
+===================================================================
+--- linux-2.6.30.5.orig/drivers/crypto/Kconfig 2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/crypto/Kconfig      2009-09-02 18:29:51.000000000 +0200
+@@ -9,6 +9,9 @@
+         If you say N, all options in this submenu will be skipped and disabled.
+ if CRYPTO_HW
++config CRYPTO_DEV_IFXMIPS
++      tristate "Support for IFXMIPS Data Encryption Unit"
++      depends on IFXMIPS
+ config CRYPTO_DEV_PADLOCK
+       tristate "Support for VIA PadLock ACE"
+Index: linux-2.6.30.5/drivers/crypto/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/drivers/crypto/Makefile        2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/crypto/Makefile     2009-09-02 18:30:55.000000000 +0200
+@@ -5,3 +5,4 @@
+ obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
+ obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
+ obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += amcc/
++obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o
+Index: linux-2.6.30.5/drivers/leds/Kconfig
+===================================================================
+--- linux-2.6.30.5.orig/drivers/leds/Kconfig   2009-09-02 18:22:49.000000000 +0200
++++ linux-2.6.30.5/drivers/leds/Kconfig        2009-09-02 18:29:51.000000000 +0200
+@@ -227,6 +227,12 @@
+         This option enables support for BD2802GU RGB LED driver chips
+         accessed via the I2C bus.
++config LEDS_IFXMIPS
++      tristate "LED Support for IFXMIPS  LEDs"
++      depends on LEDS_CLASS && IFXMIPS
++      help
++        This option enables support for the CM-X270 LEDs.
++
+ comment "LED Triggers"
+ config LEDS_TRIGGERS
+Index: linux-2.6.30.5/drivers/leds/Makefile
+===================================================================
+--- linux-2.6.30.5.orig/drivers/leds/Makefile  2009-09-02 18:22:49.000000000 +0200
++++ linux-2.6.30.5/drivers/leds/Makefile       2009-09-02 18:31:23.000000000 +0200
+@@ -27,6 +27,7 @@
+ obj-$(CONFIG_LEDS_DA903X)             += leds-da903x.o
+ obj-$(CONFIG_LEDS_WM8350)             += leds-wm8350.o
+ obj-$(CONFIG_LEDS_PWM)                        += leds-pwm.o
++obj-$(CONFIG_LEDS_IFXMIPS)            += leds-ifxmips.o
+ # LED SPI Drivers
+ obj-$(CONFIG_LEDS_DAC124S085)         += leds-dac124s085.o
+Index: linux-2.6.30.5/drivers/watchdog/Kconfig
+===================================================================
+--- linux-2.6.30.5.orig/drivers/watchdog/Kconfig       2009-08-16 23:19:38.000000000 +0200
++++ linux-2.6.30.5/drivers/watchdog/Kconfig    2009-09-02 18:29:51.000000000 +0200
+@@ -764,6 +764,12 @@
+       help
+         Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
++config IFXMIPS_WDT
++      bool "IFXMips watchdog"
++      depends on IFXMIPS
++      help
++        Hardware driver for the IFXMIPS Watchdog Timer.
++
+ # PARISC Architecture
+ # POWERPC Architecture
diff --git a/target/linux/ifxmips/patches-2.6.30/160-cfi-swap.patch b/target/linux/ifxmips/patches-2.6.30/160-cfi-swap.patch
new file mode 100644 (file)
index 0000000..109f958
--- /dev/null
@@ -0,0 +1,15 @@
+Index: linux-2.6.30.5/drivers/mtd/chips/cfi_cmdset_0002.c
+===================================================================
+--- linux-2.6.30.5.orig/drivers/mtd/chips/cfi_cmdset_0002.c    2009-09-02 18:22:49.000000000 +0200
++++ linux-2.6.30.5/drivers/mtd/chips/cfi_cmdset_0002.c 2009-09-02 18:31:31.000000000 +0200
+@@ -1090,7 +1090,9 @@
+       int retry_cnt = 0;
+       adr += chip->start;
+-
++#ifdef CONFIG_IFXMIPS
++      adr ^= 2;
++#endif
+       spin_lock(chip->mutex);
+       ret = get_chip(map, chip, adr, FL_WRITING);
+       if (ret) {
diff --git a/target/linux/ifxmips/patches-2.6.30/170-dma_hack.patch b/target/linux/ifxmips/patches-2.6.30/170-dma_hack.patch
new file mode 100644 (file)
index 0000000..469dc74
--- /dev/null
@@ -0,0 +1,13 @@
+Index: linux-2.6.30.5/arch/mips/mm/cache.c
+===================================================================
+--- linux-2.6.30.5.orig/arch/mips/mm/cache.c   2009-09-02 18:31:37.000000000 +0200
++++ linux-2.6.30.5/arch/mips/mm/cache.c        2009-09-02 18:31:42.000000000 +0200
+@@ -52,6 +52,8 @@
+ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
+ EXPORT_SYMBOL(_dma_cache_wback_inv);
++EXPORT_SYMBOL(_dma_cache_wback);
++EXPORT_SYMBOL(_dma_cache_inv);
+ #endif /* CONFIG_DMA_NONCOHERENT */
diff --git a/target/linux/ifxmips/patches-2.6.30/200-genirq_fix.patch b/target/linux/ifxmips/patches-2.6.30/200-genirq_fix.patch
new file mode 100644 (file)
index 0000000..1fbd4c8
--- /dev/null
@@ -0,0 +1,14 @@
+Index: linux-2.6.30.5/kernel/irq/chip.c
+===================================================================
+--- linux-2.6.30.5.orig/kernel/irq/chip.c      2009-09-02 20:09:15.000000000 +0200
++++ linux-2.6.30.5/kernel/irq/chip.c   2009-09-02 20:09:25.000000000 +0200
+@@ -537,6 +537,9 @@
+       kstat_incr_irqs_this_cpu(irq, desc);
++      if (unlikely(!desc->action || (desc->status & IRQ_DISABLED)))
++              return;
++
+       if (desc->chip->ack)
+               desc->chip->ack(irq);
diff --git a/target/linux/ifxmips/patches-2.6.30/201-atm.patch b/target/linux/ifxmips/patches-2.6.30/201-atm.patch
new file mode 100644 (file)
index 0000000..bbf013d
--- /dev/null
@@ -0,0 +1,26 @@
+Index: linux-2.6.28.10/include/linux/atm.h
+===================================================================
+--- linux-2.6.28.10.orig/include/linux/atm.h   2009-05-02 20:54:43.000000000 +0200
++++ linux-2.6.28.10/include/linux/atm.h        2009-09-02 15:00:30.000000000 +0200
+@@ -139,6 +139,9 @@
+       int             min_pcr;        /* minimum PCR in cells per second */
+       int             max_cdv;        /* maximum CDV in microseconds */
+       int             max_sdu;        /* maximum SDU in bytes */
++      int             scr;            /* sustained rate in cells per second */
++      int             mbs;            /* maximum burst size (MBS) in cells */
++      int             cdv;            /* Cell delay varition */
+         /* extra params for ABR */
+         unsigned int  icr;            /* Initial Cell Rate (24-bit) */
+         unsigned int  tbe;            /* Transient Buffer Exposure (24-bit) */ 
+Index: linux-2.6.28.10/kernel/time/timekeeping.c
+===================================================================
+--- linux-2.6.28.10.orig/kernel/time/timekeeping.c     2009-09-02 15:41:06.000000000 +0200
++++ linux-2.6.28.10/kernel/time/timekeeping.c  2009-09-02 15:41:23.000000000 +0200
+@@ -43,6 +43,7 @@
+  * used instead.
+  */
+ struct timespec xtime __attribute__ ((aligned (16)));
++EXPORT_SYMBOL(xtime);
+ struct timespec wall_to_monotonic __attribute__ ((aligned (16)));
+ static unsigned long total_sleep_time;                /* seconds */
diff --git a/target/linux/ifxmips/patches/000-mips-bad-intctl.patch b/target/linux/ifxmips/patches/000-mips-bad-intctl.patch
deleted file mode 100644 (file)
index 3b1c2dc..0000000
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -1464,7 +1464,16 @@ void __cpuinit per_cpu_trap_init(void)
-        */
-       if (cpu_has_mips_r2) {
-               cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+              if (!cp0_compare_irq)
-+                      cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-+
-               cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
-+              if (!cp0_perfcount_irq)
-+                      cp0_perfcount_irq = CP0_LEGACY_PERFCNT_IRQ;
-+
-+              if (arch_fixup_c0_irqs)
-+                      arch_fixup_c0_irqs();
-+
-               if (cp0_perfcount_irq == cp0_compare_irq)
-                       cp0_perfcount_irq = -1;
-       } else {
---- a/include/asm-mips/irq.h
-+++ b/include/asm-mips/irq.h
-@@ -156,8 +156,12 @@ extern void free_irqno(unsigned int irq)
-  * IE7.  Since R2 their number has to be read from the c0_intctl register.
-  */
- #define CP0_LEGACY_COMPARE_IRQ 7
-+#define CP0_LEGACY_PERFCNT_IRQ 7
- extern int cp0_compare_irq;
- extern int cp0_perfcount_irq;
-+extern void __weak arch_fixup_c0_irqs(void);
-+
-+
- #endif /* _ASM_IRQ_H */
diff --git a/target/linux/ifxmips/patches/010-mips_clocksource_init_war.patch b/target/linux/ifxmips/patches/010-mips_clocksource_init_war.patch
deleted file mode 100644 (file)
index 61d9610..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -13,6 +13,22 @@
- #include <asm/smtc_ipi.h>
- #include <asm/time.h>
-+/*
-+ * Compare interrupt can be routed and latched outside the core,
-+ * so a single execution hazard barrier may not be enough to give
-+ * it time to clear as seen in the Cause register.  4 time the
-+ * pipeline depth seems reasonably conservative, and empirically
-+ * works better in configurations with high CPU/bus clock ratios.
-+ */
-+
-+#define compare_change_hazard() \
-+      do { \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+              irq_disable_hazard(); \
-+      } while (0)
-+
- static int mips_next_event(unsigned long delta,
-                            struct clock_event_device *evt)
- {
-@@ -28,6 +44,7 @@ static int mips_next_event(unsigned long
-       cnt = read_c0_count();
-       cnt += delta;
-       write_c0_compare(cnt);
-+      compare_change_hazard();
-       res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
- #ifdef CONFIG_MIPS_MT_SMTC
-       evpe(vpflags);
-@@ -187,7 +204,7 @@ static int c0_compare_int_usable(void)
-        */
-       if (c0_compare_int_pending()) {
-               write_c0_compare(read_c0_count());
--              irq_disable_hazard();
-+              compare_change_hazard();
-               if (c0_compare_int_pending())
-                       return 0;
-       }
-@@ -196,7 +213,7 @@ static int c0_compare_int_usable(void)
-               cnt = read_c0_count();
-               cnt += delta;
-               write_c0_compare(cnt);
--              irq_disable_hazard();
-+              compare_change_hazard();
-               if ((int)(read_c0_count() - cnt) < 0)
-                   break;
-               /* increase delta if the timer was already expired */
-@@ -205,11 +222,12 @@ static int c0_compare_int_usable(void)
-       while ((int)(read_c0_count() - cnt) <= 0)
-               ;       /* Wait for expiry  */
-+      compare_change_hazard();
-       if (!c0_compare_int_pending())
-               return 0;
-       write_c0_compare(read_c0_count());
--      irq_disable_hazard();
-+      compare_change_hazard();
-       if (c0_compare_int_pending())
-               return 0;
diff --git a/target/linux/ifxmips/patches/100-board.patch b/target/linux/ifxmips/patches/100-board.patch
deleted file mode 100644 (file)
index 052a08a..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -78,6 +78,23 @@ config MIPS_COBALT
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       select GENERIC_HARDIRQS_NO__DO_IRQ
-+config IFXMIPS
-+      bool "Infineon Twinpass, Danube, Amazon-SE"
-+      select DMA_NONCOHERENT
-+      select IRQ_CPU
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_CPU_MIPS32_R2
-+      select HAVE_STD_PC_SERIAL_PORT
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select SYS_SUPPORTS_MULTITHREADING
-+      select SYS_HAS_EARLY_PRINTK
-+      select HW_HAS_PCI
-+      select GENERIC_GPIO
-+      select SWAP_IO_SPACE
-+
- config MACH_DECSTATION
-       bool "DECstations"
-       select BOOT_ELF32
-@@ -697,6 +714,7 @@ source "arch/mips/sibyte/Kconfig"
- source "arch/mips/tx4927/Kconfig"
- source "arch/mips/tx4938/Kconfig"
- source "arch/mips/vr41xx/Kconfig"
-+source "arch/mips/ifxmips/Kconfig"
- endmenu
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -283,6 +283,13 @@ cflags-$(CONFIG_MIPS_COBALT)      += -Iinclud
- load-$(CONFIG_MIPS_COBALT)    += 0xffffffff80080000
- #
-+# Infineon IFXMIPS
-+#
-+core-$(CONFIG_IFXMIPS) += arch/mips/ifxmips/
-+cflags-$(CONFIG_IFXMIPS)   += -Iinclude/asm-mips/mach-ifxmips
-+load-$(CONFIG_IFXMIPS) += 0xffffffff80002000
-+
-+#
- # DECstation family
- #
- core-$(CONFIG_MACH_DECSTATION)        += arch/mips/dec/
---- a/include/asm-mips/bootinfo.h
-+++ b/include/asm-mips/bootinfo.h
-@@ -94,6 +94,12 @@
- #define MACH_MSP7120_FPGA       5     /* PMC-Sierra MSP7120 Emulation */
- #define MACH_MSP_OTHER        255     /* PMC-Sierra unknown board type */
-+/*
-+ * Valid machtype for group IFXMIPS
-+ */
-+#define MACH_GROUP_IFXMIPS     29
-+#define MACH_INFINEON_IFXMIPS  0
-+
- #define CL_SIZE                       COMMAND_LINE_SIZE
- extern char *system_type;
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938)       += fixup-
- obj-$(CONFIG_VICTOR_MPC30X)   += fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA)    += fixup-capcella.o
- obj-$(CONFIG_WR_PPMC)         += fixup-wrppmc.o
-+obj-$(CONFIG_IFXMIPS)         += pci-ifxmips.o ops-ifxmips.o
diff --git a/target/linux/ifxmips/patches/110-drivers.patch b/target/linux/ifxmips/patches/110-drivers.patch
deleted file mode 100644 (file)
index 931978f..0000000
+++ /dev/null
@@ -1,149 +0,0 @@
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -114,6 +114,10 @@ obj-$(CONFIG_PS3_FLASH)           += ps3flash.o
- obj-$(CONFIG_JS_RTC)          += js-rtc.o
- js-rtc-y = rtc.o
-+obj-$(CONFIG_IFXMIPS_SSC)  += ifxmips_ssc.o
-+obj-$(CONFIG_IFXMIPS_EEPROM)   += ifxmips_eeprom.o
-+obj-$(CONFIG_IFXMIPS_MEI)  += ifxmips_mei_core.o
-+
- # Files generated that shall be removed upon make clean
- clean-files := consolemap_deftbl.c defkeymap.c
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -67,3 +67,4 @@ obj-$(CONFIG_MTD_PLATRAM)    += plat-ram.o
- obj-$(CONFIG_MTD_OMAP_NOR)    += omap_nor.o
- obj-$(CONFIG_MTD_MTX1)                += mtx-1_flash.o
- obj-$(CONFIG_MTD_INTEL_VR_NOR)        += intel_vr_nor.o
-+obj-$(CONFIG_MTD_IFXMIPS)  += ifxmips.o
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -351,6 +351,12 @@ config MACB
- source "drivers/net/arm/Kconfig"
-+config IFXMIPS_MII0
-+      tristate "Infineon IFXMips eth0 driver"
-+      depends on IFXMIPS
-+      help
-+        Support for the MII0 inside the IFXMips SOC
-+
- config AX88796
-       tristate "ASIX AX88796 NE2000 clone support"
-       depends on ARM || MIPS || SUPERH
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -1334,6 +1334,14 @@ config SERIAL_OF_PLATFORM
-         Currently, only 8250 compatible ports are supported, but
-         others can easily be added.
-+config SERIAL_IFXMIPS
-+      bool "IFXMips serial driver"
-+      depends on IFXMIPS
-+      select SERIAL_CORE
-+      select SERIAL_CORE_CONSOLE
-+      help
-+        Driver for the ifxmipss built in ASC hardware
-+
- config SERIAL_QE
-       tristate "Freescale QUICC Engine serial port support"
-       depends on QUICC_ENGINE
---- a/drivers/serial/Makefile
-+++ b/drivers/serial/Makefile
-@@ -68,3 +68,4 @@ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_s
- obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
- obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
- obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
-+obj-$(CONFIG_SERIAL_IFXMIPS) += ifxmips_asc.o
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -97,6 +97,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_IFXMIPS_WDT) += ifxmips_wdt.o
- # PARISC Architecture
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -256,4 +256,4 @@ obj-$(CONFIG_NETXEN_NIC) += netxen/
- obj-$(CONFIG_NIU) += niu.o
- obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
- obj-$(CONFIG_SFC) += sfc/
--
-+obj-$(CONFIG_IFXMIPS_MII0) += ifxmips_mii0.o
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -9,6 +9,9 @@ menuconfig CRYPTO_HW
-         If you say N, all options in this submenu will be skipped and disabled.
- if CRYPTO_HW
-+config CRYPTO_DEV_IFXMIPS
-+      tristate "Support for IFXMIPS Data Encryption Unit"
-+      depends on IFXMIPS
- config CRYPTO_DEV_PADLOCK
-       tristate "Support for VIA PadLock ACE"
---- a/drivers/crypto/Makefile
-+++ b/drivers/crypto/Makefile
-@@ -4,3 +4,4 @@ obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-
- obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
- obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
- obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
-+obj-$(CONFIG_CRYPTO_DEV_IFXMIPS) += ifxdeu-aes.o ifxdeu-des.o ifxdeu-dma.o ifxdeu-generic.o ifxdeu-md5.o ifxdeu-sha1.o
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -305,3 +305,10 @@ config SUPERH_ON_CHIP_R8A66597
-       help
-          This driver enables support for the on-chip R8A66597 in the
-          SH7366 and SH7723 processors.
-+
-+config USB_DWC_HCD
-+      tristate "IFXMIPS USB Host Controller Driver"
-+      depends on USB && IFXMIPS 
-+      default y
-+      help
-+       Danube USB Host Controller
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -153,6 +153,12 @@ config LEDS_CLEVO_MAIL
-         To compile this driver as a module, choose M here: the
-         module will be called leds-clevo-mail.
-+config LEDS_IFXMIPS
-+      tristate "LED Support for IFXMIPS  LEDs"
-+      depends on LEDS_CLASS && IFXMIPS
-+      help
-+        This option enables support for the CM-X270 LEDs.
-+
- comment "LED Triggers"
- config LEDS_TRIGGERS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_LEDS_CM_X270)              
- obj-$(CONFIG_LEDS_CLEVO_MAIL)         += leds-clevo-mail.o
- obj-$(CONFIG_LEDS_HP6XX)              += leds-hp6xx.o
- obj-$(CONFIG_LEDS_FSG)                        += leds-fsg.o
-+obj-$(CONFIG_LEDS_IFXMIPS)            += leds-ifxmips.o
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER)      += ledtrig-timer.o
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -683,6 +683,12 @@ config TXX9_WDT
-       help
-         Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
-+config IFXMIPS_WDT
-+      bool "IFXMips watchdog"
-+      depends on IFXMIPS
-+      help
-+        Hardware driver for the IFXMIPS Watchdog Timer.
-+
- # PARISC Architecture
- # POWERPC Architecture
diff --git a/target/linux/ifxmips/patches/160-cfi-swap.patch b/target/linux/ifxmips/patches/160-cfi-swap.patch
deleted file mode 100644 (file)
index 5c98c35..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1041,7 +1041,9 @@ static int __xipram do_write_oneword(str
-       int retry_cnt = 0;
-       adr += chip->start;
--
-+#ifdef CONFIG_IFXMIPS
-+      adr ^= 2;
-+#endif
-       spin_lock(chip->mutex);
-       ret = get_chip(map, chip, adr, FL_WRITING);
-       if (ret) {
diff --git a/target/linux/ifxmips/patches/170-dma_hack.patch b/target/linux/ifxmips/patches/170-dma_hack.patch
deleted file mode 100644 (file)
index 6175c3e..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -50,6 +50,8 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_wback);
-+EXPORT_SYMBOL(_dma_cache_inv);
- #endif /* CONFIG_DMA_NONCOHERENT */