base-files: configure switch in failsafe
authorJonas Gorski <jonas.gorski@gmail.com>
Thu, 28 Jul 2016 22:25:09 +0000 (00:25 +0200)
committerJonas Gorski <jonas.gorski@gmail.com>
Sat, 13 Aug 2016 13:50:15 +0000 (15:50 +0200)
Also configure the switch based on the failsafe config, and create the
failsafe interface as tagged if necessary.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
package/base-files/files/lib/preinit/10_indicate_preinit

index 33e90b1..82b730f 100644 (file)
@@ -22,6 +22,41 @@ preinit_ip_config() {
        ip -4 address add $pi_ip/$pi_netmask broadcast $pi_broadcast dev $1
 }
 
+preinit_config_switch() {
+       local role roles ports device enable reset
+
+       local name=$1
+       local lan_if=$2
+
+       json_select switch
+       json_select $name
+
+       json_get_vars enable reset
+
+       if json_is_a roles array; then
+               json_get_keys roles roles
+               json_select roles
+
+               for role in $roles; do
+                       json_select "$role"
+                       json_get_vars ports device
+                       json_select ..
+
+                       if [ "$device" = "$lan_if" ]; then
+                               swconfig dev $name set reset $reset
+                               swconfig dev $name set enable_vlan $enable
+                               swconfig dev $name vlan $role set ports "$ports"
+                               swconfig dev $name set apply
+                       fi
+               done
+
+               json_select ..
+       fi
+
+       json_select ..
+       json_select ..
+}
+
 preinit_config_board() {
        /bin/board_detect /tmp/board.json
 
@@ -43,8 +78,17 @@ preinit_config_board() {
        # only use the first one
        ifname=${ifname%% *}
 
-       # trim any vlan ids
-       ifname=${ifname%\.*}
+       if [ -x /sbin/swconfig ]; then
+               # configure the switch, if present
+
+               json_get_keys keys switch
+               for key in $keys; do
+                       preinit_config_switch $key $ifname
+               done
+       else
+               # trim any vlan ids
+               ifname=${ifname%\.*}
+       fi
 
        preinit_ip_config $ifname
 }