ramips: Fix support for PBR-M1 board
authorJohn Crispin <john@openwrt.org>
Fri, 11 Dec 2015 15:03:50 +0000 (15:03 +0000)
committerJohn Crispin <john@openwrt.org>
Fri, 11 Dec 2015 15:03:50 +0000 (15:03 +0000)
The PBR-M1 support in current OpenWrt is for the early demo board and it doesn't work on the final board.This patch fixes the support for it.

The LED called pbr-m1:buzzer is a beeper connected to GPIO26 so I used gpio-beeper instead of gpio-leds.

Signed-off-by: 郭传鈜 <gch981213@gmail.com>
SVN-Revision: 47844

target/linux/ramips/base-files/etc/board.d/01_leds
target/linux/ramips/base-files/etc/diag.sh
target/linux/ramips/dts/PBR-M1.dts

index 8cb0e48..40a5244 100755 (executable)
@@ -200,9 +200,9 @@ oy-0001)
        set_wifi_led "$board:green:wifi"
        ;;
 pbr-m1)
-       ucidef_set_led_netdev "internet" "internet" "$board:green:internet" "eth0.2"
-       ucidef_set_led_default "power" "power" "$board:green:power" "1"
-       ucidef_set_led_default "sys" "sys" "$board:green:sys" "1"
+       ucidef_set_led_netdev "internet" "internet" "$board:blue:internet" "eth0.2"
+       ucidef_set_led_default "power" "power" "$board:blue:power" "1"
+       ucidef_set_led_default "sys" "sys" "$board:blue:sys" "1"
        ;;
 px-4885)
        set_wifi_led "$board:orange:wifi"
index ff5fbf2..3940a54 100644 (file)
@@ -83,6 +83,7 @@ get_status_led() {
                ;;
        dap-1350|\
        na930|\
+       pbr-m1|\
        rt-n13u|\
        rt-n14u|\
        rt-n15|\
@@ -135,11 +136,6 @@ get_status_led() {
        sl-r7205)
                status_led="$board:green:wifi"
                ;;
-       pbr-m1|\
-       w306r-v20|\
-       zbt-wr8305rt)
-               status_led="$board:green:sys"
-               ;;
        psr-680w)
                status_led="$board:red:wan"
                ;;
@@ -165,6 +161,10 @@ get_status_led() {
        v22rw-2x2)
                status_led="$board:green:security"
                ;;
+       w306r-v20|\
+       zbt-wr8305rt)
+               status_led="$board:green:sys"
+               ;;
        wcr-150gn|\
        wl-351)
                status_led="$board:amber:power"
index d3225f4..c886e37 100644 (file)
 
        sdhci@10130000 {
                status = "okay";
+               pinctrl-names = "default";
+               pinctrl-0 = <&sdhci_pins>;
+       };
+
+       xhci@1E1C0000 {
+               status = "okay";
        };
 
        palmbus@1E000000 {
@@ -81,7 +87,7 @@
                        mt76@0,0 {
                                reg = <0x0000 0 0 0 0>;
                                device_type = "pci";
-                               mediatek,mtd-eeprom = <&factory 0x0000>;
+                               mediatek,mtd-eeprom = <&factory 0x8000>;
                                mediatek,2ghz = <0>;
                        };
                };
@@ -90,7 +96,7 @@
                        mt76@1,0 {
                                reg = <0x0000 0 0 0 0>;
                                device_type = "pci";
-                               mediatek,mtd-eeprom = <&factory 0x8000>;
+                               mediatek,mtd-eeprom = <&factory 0x0000>;
                                mediatek,5ghz = <0>;
                        };
                };
        gpio-leds {
                compatible = "gpio-leds";
 
-               buzzer {
-                       label = "pbr-m1:buzzer";
-                       gpios = <&gpio0 27 1>;
-               };
-
                power {
-                       label = "pbr-m1:green:power";
-                       gpios = <&gpio0 25 1>;
+                       label = "pbr-m1:blue:power";
+                       gpios = <&gpio0 31 1>;
                };
 
                sys {
-                       label = "pbr-m1:green:sys";
-                       gpios = <&gpio0 24 1>;
+                       label = "pbr-m1:blue:sys";
+                       gpios = <&gpio1 0 1>;
                };
 
                internet {
-                       label = "pbr-m1:green:internet";
-                       gpios = <&gpio0 23 1>;
+                       label = "pbr-m1:blue:internet";
+                       gpios = <&gpio0 29 1>;
+               };
+
+               wlan2g {
+                       label = "pbr-m1:blue:wlan2g";
+                       gpios = <&gpio1 1 1>;
+               };
+
+               wlan5g {
+                       label = "pbr-m1:blue:wlan5g";
+                       gpios = <&gpio0 28 1>;
                };
        };
 
                };
        };
 
+       gpio_export {
+               compatible = "gpio-export";
+               #size-cells = <0>;
+
+               power_usb2 {
+                       gpio-export,name = "power_usb2";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 22 0>;
+               };
+
+               power_usb3 {
+                       gpio-export,name = "power_usb3";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 25 0>;
+               };
+
+               power_sata {
+                       gpio-export,name = "power_sata";
+                       gpio-export,output = <1>;
+                       gpios = <&gpio0 27 0>;
+               };
+       };
+
+       beeper: beeper {
+               compatible = "gpio-beeper";
+               gpios = <&gpio0 26 1>;
+       };
+
        pinctrl {
                state_default: pinctrl0 {
                        gpio {
-                               ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
+                               ralink,group = "wdt", "rgmii2", "jtag", "mdio";
                                ralink,function = "gpio";
                        };
                };