wr1043nd-v2: Change .code of the wi-fi button to KEY_RFKILL
authorJohn Crispin <john@openwrt.org>
Tue, 14 Oct 2014 19:01:21 +0000 (19:01 +0000)
committerJohn Crispin <john@openwrt.org>
Tue, 14 Oct 2014 19:01:21 +0000 (19:01 +0000)
This patch changes the code of the Wi-Fi On/Off button on the TP-Link WR1043ND v2
from KEY_WLAN to KEY_RFKILL (and renames a few constants to match). The reason
for this change is, that the KEY_WIFI¬†button code is not recognized by the
hotplug subsystem. This means that the userspace is not notified about the
button being pressed which effectively renders it useless.

Signed-off-by: Josef Gajdusek <atx@atx.name>
SVN-Revision: 42922

target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c

index 3e79ee1..abdbde0 100644 (file)
@@ -43,7 +43,7 @@
 #define TL_WR1043_V2_GPIO_LED_SYSTEM   19
 
 #define TL_WR1043_V2_GPIO_BTN_RESET    16
-#define TL_WR1043_V2_GPIO_BTN_WLAN     17
+#define TL_WR1043_V2_GPIO_BTN_RFKILL   17
 
 #define TL_WR1043_V2_GPIO_USB_POWER    21
 
@@ -94,11 +94,11 @@ static struct gpio_keys_button tl_wr1043_v2_gpio_keys[] __initdata = {
                .active_low     = 1,
        },
        {
-               .desc           = "WLAN button",
+               .desc           = "RFKILL button",
                .type           = EV_KEY,
-               .code           = KEY_WLAN,
+               .code           = KEY_RFKILL,
                .debounce_interval = TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL,
-               .gpio           = TL_WR1043_V2_GPIO_BTN_WLAN,
+               .gpio           = TL_WR1043_V2_GPIO_BTN_RFKILL,
                .active_low     = 1,
        },
 };