ath79: fix boardname of GL.iNet GL-AR300M
authorPaul Wassi <p.wassi@gmx.at>
Mon, 31 Dec 2018 12:45:29 +0000 (13:45 +0100)
committerMathias Kresin <dev@kresin.me>
Mon, 31 Dec 2018 13:24:21 +0000 (14:24 +0100)
This device is called GL-AR300M, therefore rename the board(s)
to 'gl-ar300m-nor' and 'gl-ar300m-nand'

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
[change boardname in uboot envtools as well, don't use wildcards for
boardname]
Signed-off-by: Mathias Kresin <dev@kresin.me>
package/boot/uboot-envtools/files/ath79
target/linux/ath79/base-files/etc/board.d/02_network
target/linux/ath79/dts/qca9531_glinet_ar300m-nand.dts [deleted file]
target/linux/ath79/dts/qca9531_glinet_ar300m-nor.dts [deleted file]
target/linux/ath79/dts/qca9531_glinet_ar300m.dtsi [deleted file]
target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts [new file with mode: 0644]
target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts [new file with mode: 0644]
target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi [new file with mode: 0644]
target/linux/ath79/image/generic.mk
target/linux/ath79/image/nand.mk

index a306f67..bf8ca2f 100644 (file)
@@ -17,7 +17,8 @@ buffalo,wzr-hp-ag300h)
         ubootenv_add_uci_config "/dev/mtd3" "0x0" "0x10000" "0x10000"
         ;;
 buffalo,bhr-4grv2|\
-glinet,ar300m|\
+glinet,gl-ar300m-nand|\
+glinet,gl-ar300m-nor|\
 ocedo,koala|\
 ocedo,raccoon|\
 openmesh,om5p-ac-v2)
index 8e92c2f..626fb2c 100755 (executable)
@@ -89,8 +89,9 @@ ath79_setup_interfaces()
        etactica,eg200)
                ucidef_set_interface_lan "eth0" "dhcp"
                ;;
-       glinet,ar300m|\
        glinet,gl-ar150|\
+       glinet,gl-ar300m-nand|\
+       glinet,gl-ar300m-nor|\
        glinet,gl-x750|\
        tplink,tl-wr810n-v1|\
        tplink,tl-wr810n-v2)
diff --git a/target/linux/ath79/dts/qca9531_glinet_ar300m-nand.dts b/target/linux/ath79/dts/qca9531_glinet_ar300m-nand.dts
deleted file mode 100644 (file)
index 82f8418..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-/dts-v1/;
-
-#include "qca9531_glinet_ar300m.dtsi"
-
-/ {
-       compatible = "glinet,ar300m-nand", "qca,qca9531";
-       model = "GL.iNet GL-AR300M (NAND)";
-};
-
-&spi {
-       status = "okay";
-       num-cs = <1>;
-
-       flash@0 {
-               compatible = "winbond,w25q128", "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x040000>;
-                               read-only;
-                       };
-
-                       partition@1 {
-                               label = "u-boot-env";
-                               reg = <0x040000 0x010000>;
-                       };
-
-                       partition@2 {
-                               label = "reserved";
-                               reg = <0x050000 0xfa0000>;
-                       };
-
-                       art: partition@3 {
-                               label = "art";
-                               reg = <0xff0000 0x010000>;
-                       };
-               };
-       };
-
-       flash@1 {
-               compatible = "spinand,mt29f";
-               reg = <1>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "kernel";
-                               reg = <0x000000 0x0200000>;
-                       };
-
-                       partition@1 {
-                               label = "ubi";
-                               reg = <0x200000 0x7e00000>;
-                       };
-               };
-       };
-};
diff --git a/target/linux/ath79/dts/qca9531_glinet_ar300m-nor.dts b/target/linux/ath79/dts/qca9531_glinet_ar300m-nor.dts
deleted file mode 100644 (file)
index 36903bd..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca9531_glinet_ar300m.dtsi"
-
-/ {
-       compatible = "glinet,ar300m-nor", "qca,qca9531";
-       model = "GL.iNet GL-AR300M (NOR)";
-};
-
-&spi {
-       status = "okay";
-       num-cs = <0>;
-
-       flash@0 {
-               compatible = "winbond,w25q128", "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x040000>;
-                               read-only;
-                       };
-
-                       partition@1 {
-                               label = "u-boot-env";
-                               reg = <0x040000 0x010000>;
-                       };
-
-                       partition@2 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x050000 0xfa0000>;
-                       };
-
-                       art: partition@3 {
-                               label = "art";
-                               reg = <0xff0000 0x010000>;
-                       };
-               };
-       };
-};
diff --git a/target/linux/ath79/dts/qca9531_glinet_ar300m.dtsi b/target/linux/ath79/dts/qca9531_glinet_ar300m.dtsi
deleted file mode 100644 (file)
index 34fcfb3..0000000
+++ /dev/null
@@ -1,99 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "qca953x.dtsi"
-
-/ {
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
-               pinctrl-names = "default";
-               pinctrl-0 = <&jtag_disable_pins>;
-
-               button0 {
-                       label = "reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-               };
-
-               button1 {
-                       label = "button right";
-                       linux,code = <BTN_0>;
-                       gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-               };
-
-               button3 {
-                       label = "button left";
-                       linux,code = <BTN_1>;
-                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               usb {
-                       label = "gl-ar300m:green:usb";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       trigger-sources = <&hub_port>;
-                       linux,default-trigger = "usbport";
-               };
-
-               wlan {
-                       label = "gl-ar300m:green:wlan";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy0tpt";
-               };
-
-               lan {
-                       label = "gl-ar300m:green:lan";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-               };
-
-               status {
-                       label = "gl-ar300m:green:status";
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&pcie0 {
-       status = "okay";
-};
-
-&uart {
-       status = "okay";
-};
-
-&usb0 {
-       #address-cells = <1>;
-       #size-cells = <0>;
-       status = "okay";
-
-       hub_port: port@1 {
-               reg = <1>;
-               #trigger-source-cells = <0>;
-       };
-};
-
-&usb_phy {
-       status = "okay";
-};
-
-&eth0 {
-       status = "okay";
-       mtd-mac-address = <&art 0x0>;
-       phy-handle = <&swphy4>;
-};
-
-&eth1 {
-       mtd-mac-address = <&art 0x6>;
-};
-
-&wmac {
-       status = "okay";
-       mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&art 0x1002>;
-};
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nand.dts
new file mode 100644 (file)
index 0000000..9e78f83
--- /dev/null
@@ -0,0 +1,68 @@
+/dts-v1/;
+
+#include "qca9531_glinet_gl-ar300m.dtsi"
+
+/ {
+       compatible = "glinet,gl-ar300m-nand", "qca,qca9531";
+       model = "GL.iNet GL-AR300M (NAND)";
+};
+
+&spi {
+       status = "okay";
+       num-cs = <1>;
+
+       flash@0 {
+               compatible = "winbond,w25q128", "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x040000>;
+                               read-only;
+                       };
+
+                       partition@1 {
+                               label = "u-boot-env";
+                               reg = <0x040000 0x010000>;
+                       };
+
+                       partition@2 {
+                               label = "reserved";
+                               reg = <0x050000 0xfa0000>;
+                       };
+
+                       art: partition@3 {
+                               label = "art";
+                               reg = <0xff0000 0x010000>;
+                       };
+               };
+       };
+
+       flash@1 {
+               compatible = "spinand,mt29f";
+               reg = <1>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "kernel";
+                               reg = <0x000000 0x0200000>;
+                       };
+
+                       partition@1 {
+                               label = "ubi";
+                               reg = <0x200000 0x7e00000>;
+                       };
+               };
+       };
+};
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m-nor.dts
new file mode 100644 (file)
index 0000000..6b77af0
--- /dev/null
@@ -0,0 +1,50 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9531_glinet_gl-ar300m.dtsi"
+
+/ {
+       compatible = "glinet,gl-ar300m-nor", "qca,qca9531";
+       model = "GL.iNet GL-AR300M (NOR)";
+};
+
+&spi {
+       status = "okay";
+       num-cs = <0>;
+
+       flash@0 {
+               compatible = "winbond,w25q128", "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x040000>;
+                               read-only;
+                       };
+
+                       partition@1 {
+                               label = "u-boot-env";
+                               reg = <0x040000 0x010000>;
+                       };
+
+                       partition@2 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x050000 0xfa0000>;
+                       };
+
+                       art: partition@3 {
+                               label = "art";
+                               reg = <0xff0000 0x010000>;
+                       };
+               };
+       };
+};
diff --git a/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi b/target/linux/ath79/dts/qca9531_glinet_gl-ar300m.dtsi
new file mode 100644 (file)
index 0000000..34fcfb3
--- /dev/null
@@ -0,0 +1,99 @@
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&jtag_disable_pins>;
+
+               button0 {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+               };
+
+               button1 {
+                       label = "button right";
+                       linux,code = <BTN_0>;
+                       gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+               };
+
+               button3 {
+                       label = "button left";
+                       linux,code = <BTN_1>;
+                       gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               usb {
+                       label = "gl-ar300m:green:usb";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       trigger-sources = <&hub_port>;
+                       linux,default-trigger = "usbport";
+               };
+
+               wlan {
+                       label = "gl-ar300m:green:wlan";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               lan {
+                       label = "gl-ar300m:green:lan";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+               };
+
+               status {
+                       label = "gl-ar300m:green:status";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&pcie0 {
+       status = "okay";
+};
+
+&uart {
+       status = "okay";
+};
+
+&usb0 {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       status = "okay";
+
+       hub_port: port@1 {
+               reg = <1>;
+               #trigger-source-cells = <0>;
+       };
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&eth0 {
+       status = "okay";
+       mtd-mac-address = <&art 0x0>;
+       phy-handle = <&swphy4>;
+};
+
+&eth1 {
+       mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+       status = "okay";
+       mtd-cal-data = <&art 0x1000>;
+       mtd-mac-address = <&art 0x1002>;
+};
index 600ab43..774695b 100644 (file)
@@ -268,14 +268,14 @@ define Device/glinet_gl-ar150
 endef
 TARGET_DEVICES += glinet_gl-ar150
 
-define Device/glinet_ar300m-nor
+define Device/glinet_gl-ar300m-nor
   ATH_SOC := qca9531
   DEVICE_TITLE := GL.iNet GL-AR300M
   DEVICE_PACKAGES := kmod-usb-core kmod-usb2
   IMAGE_SIZE := 16000k
   SUPPORTED_DEVICES += gl-ar300m
 endef
-TARGET_DEVICES += glinet_ar300m-nor
+TARGET_DEVICES += glinet_gl-ar300m-nor
 
 define Device/glinet_ar750s
   ATH_SOC := qca9563
index 5c77123..eee4191 100644 (file)
@@ -1,4 +1,4 @@
-define Device/glinet_ar300m-nand
+define Device/glinet_gl-ar300m-nand
   ATH_SOC := qca9531
   DEVICE_TITLE := GL-AR300M (NAND)
   DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport
@@ -10,4 +10,4 @@ define Device/glinet_ar300m-nand
   IMAGE/sysupgrade.bin := sysupgrade-tar
   IMAGE/factory.ubi := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
 endef
-TARGET_DEVICES += glinet_ar300m-nand
+TARGET_DEVICES += glinet_gl-ar300m-nand