ar71xx: wpj558: remove unused eth1 device and fix MAC address
authorEnrique Giraldo <enrique.giraldo@galgus.net>
Thu, 6 Jul 2017 12:04:31 +0000 (14:04 +0200)
committerPiotr Dymacz <pepe2k@gmail.com>
Sun, 10 Sep 2017 20:15:04 +0000 (22:15 +0200)
Signed-off-by: Enrique Giraldo <enrique.giraldo@galgus.net>
target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/ar71xx/files/arch/mips/ath79/mach-wpj558.c

index 5fa8c2f..9a92887 100755 (executable)
@@ -540,7 +540,8 @@ ar71xx_setup_macs()
        mynet-n750)
                wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
                ;;
-       wpj344)
+       wpj344|\
+       wpj558)
                wan_mac=$(mtd_get_mac_binary u-boot 0x2e018)
                ;;
        esac
index c7b120d..910a962 100644 (file)
@@ -50,7 +50,7 @@
 #define WPJ558_KEYS_POLL_INTERVAL      20      /* msecs */
 #define WPJ558_KEYS_DEBOUNCE_INTERVAL  (3 * WPJ558_KEYS_POLL_INTERVAL)
 
-#define WPJ558_MAC_OFFSET                      0x1002
+#define WPJ558_MAC_OFFSET              0x10
 #define WPJ558_WMAC_CALDATA_OFFSET     0x1000
 
 static struct gpio_led wpj558_leds_gpio[] __initdata = {
@@ -135,6 +135,7 @@ static struct mdio_board_info wpj558_mdio0_info[] = {
 static void __init wpj558_setup(void)
 {
        u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+       u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000);
 
        ath79_register_m25p80(NULL);
        ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj558_leds_gpio),
@@ -153,8 +154,7 @@ static void __init wpj558_setup(void)
                                        ARRAY_SIZE(wpj558_mdio0_info));
        ath79_register_mdio(0, 0x0);
 
-       ath79_init_mac(ath79_eth0_data.mac_addr, art + WPJ558_MAC_OFFSET, 0);
-       ath79_init_mac(ath79_eth1_data.mac_addr, art + WPJ558_MAC_OFFSET, 0);
+       ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ558_MAC_OFFSET, 0);
 
        ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
 
@@ -164,14 +164,7 @@ static void __init wpj558_setup(void)
        ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
        ath79_eth0_pll_data.pll_1000 = 0x56000000;
 
-       /* GMAC1 is connected to the SGMII interface */
-       ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
-       ath79_eth1_data.speed = SPEED_1000;
-       ath79_eth1_data.duplex = DUPLEX_FULL;
-       ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
        ath79_register_eth(0);
-       ath79_register_eth(1);
 }
 
 MIPS_MACHINE(ATH79_MACH_WPJ558, "WPJ558", "Compex WPJ558", wpj558_setup);