Add CDMA/EVDO support to comgt package
authorFelix Fietkau <nbd@openwrt.org>
Sat, 2 Feb 2008 01:21:31 +0000 (01:21 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Sat, 2 Feb 2008 01:21:31 +0000 (01:21 +0000)
This patch adds a chat script and makes some modifications to
/lib/network/3g.sh to enable seamless use of CDMA/EVDO modems in
addition to the existing GPRS/UMTS support.  Modifications to 3g.sh
are:
 - Added 'chat' variable to point at the appropriate script
 - Added 'evdo' and 'cdma' as acceptable 'service' values, and skip
the whole gcom initialization bit
 - Changed pppd connection speed from 460800 to more widely supported
115200; in my experience, this is not your actual connection speed,
but at what speed pppd sends setup commands to the interface.

This kinda eliminates the need for /etc/ppp/3g.connect - I think I've
replaced that functionality, but in a slightly more standardized
method, using the 'connect' variable understood by PPP.

Signed-off-by: RB<aoz.syn@gmail.com>
SVN-Revision: 10347

package/comgt/Makefile
package/comgt/files/3g.sh
package/comgt/files/evdo.chat [new file with mode: 0644]

index 606f2f1..2cbfec5 100644 (file)
@@ -48,6 +48,7 @@ define Package/comgt/install
        $(INSTALL_BIN) ./files/3g.connect $(1)/etc/ppp/3g.connect
        $(INSTALL_DIR) $(1)/etc/chatscripts
        $(INSTALL_DATA) ./files/3g.chat $(1)/etc/chatscripts/3g.chat
+       $(INSTALL_DATA) ./files/evdo.chat $(1)/etc/chatscripts/evdo.chat
        $(INSTALL_DIR) $(1)/lib/network
        $(INSTALL_DATA) ./files/3g.sh $(1)/lib/network/3g.sh
        $(INSTALL_DIR) $(1)/etc/hotplug.d/button
index 5274821..2859a1b 100644 (file)
@@ -36,6 +36,7 @@ stop_interface_3g() {
 setup_interface_3g() {
        local iface="$1"
        local config="$2"
+       local chat="/etc/chatscripts/3g.chat"
        
        config_get device "$config" device
 
@@ -51,30 +52,35 @@ setup_interface_3g() {
        set_3g_led 1 0 1
 
        # figure out hardware specific commands for the card
-       if gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | grep Novatel 2>/dev/null >/dev/null; then
-               case "$service" in
-                       umts_only) CODE=2;;
-                       gprs_only) CODE=1;;
-                       *) CODE=0;;
-               esac
-               mode="AT\$NWRAT=${CODE},2"
-       else
-               case "$service" in
-                       umts_only) CODE=1;;
-                       gprs_only) CODE=0;;
-                       *) CODE=3;;
-               esac
-               mode="AT_OPSYS=${CODE}"
-       fi
-       
-       PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
-               echo "$cfg(3g): Failed to set the PIN code."
-               set_3g_led 0 0 0
-               return 1
-       }
-       MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
+       case "$service" in
+               cdma|evdo) chat="/etc/chatscripts/evdo.chat";;
+       *)
+               if gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | grep Novatel 2>/dev/null >/dev/null; then
+                       case "$service" in
+                               umts_only) CODE=2;;
+                               gprs_only) CODE=1;;
+                               *) CODE=0;;
+                       esac
+                       mode="AT\$NWRAT=${CODE},2"
+               else
+                       case "$service" in
+                               umts_only) CODE=1;;
+                               gprs_only) CODE=0;;
+                               *) CODE=3;;
+                       esac
+                       mode="AT_OPSYS=${CODE}"
+               fi
+               
+               PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
+                       echo "$cfg(3g): Failed to set the PIN code."
+                       set_3g_led 0 0 0
+                       return 1
+               }
+               MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
+       esac
        set_3g_led 1 0 0
 
+       config_set "$config" "connect" "${apn:+USE_APN=$apn }/usr/sbin/chat -t5 -f $chat"
        start_pppd "$config" \
                noaccomp \
                nopcomp \
@@ -83,7 +89,6 @@ setup_interface_3g() {
                noauth \
                lock \
                crtscts \
-               connect "USE_APN=\"$apn\" /etc/ppp/3g.connect" \
                ${mtu:+mtu $mtu mru $mtu} \
-               460800 "$device"
+               115200 "$device"
 }
diff --git a/package/comgt/files/evdo.chat b/package/comgt/files/evdo.chat
new file mode 100644 (file)
index 0000000..de49e41
--- /dev/null
@@ -0,0 +1,17 @@
+# This is a simple chat script based off of the one provided by Sierra Wireless
+# for CDMA connections.  It should work for both Sprint and Verizon networks.
+
+ABORT  BUSY
+ABORT  'NO CARRIER'
+ABORT  ERROR
+ABORT  'NO DIAL TONE'
+ABORT  'NO ANSWER'
+ABORT  DELAYED
+REPORT CONNECT
+TIMEOUT        10
+''             AT
+OK             ATZ
+SAY     'Calling CDMA/EVDO'
+TIMEOUT        30
+OK             ATDT#777
+CONNECT        ''