bcm53xx: switch to m25p80 and drop bcm53xxspiflash
authorRafał Miłecki <zajec5@gmail.com>
Tue, 26 Apr 2016 17:08:53 +0000 (17:08 +0000)
committerJo-Philipp Wich <jo@mein.io>
Thu, 28 Apr 2016 09:48:50 +0000 (11:48 +0200)
For some time now m25p80 supports 32 MiB flashes and we just needed to
patch spi-nor to support JEDEC incompatible w25q128. Also by switching
to m25p80 we gain accelerated SPI flash reads.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 49260

target/linux/bcm53xx/config-4.4
target/linux/bcm53xx/patches-4.4/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch [deleted file]
target/linux/bcm53xx/patches-4.4/820-spi-bcm53xx-let-DT-specify-SPI-device-s-instead-hard.patch [new file with mode: 0644]

index 40826c7..ce9508a 100644 (file)
@@ -215,11 +215,11 @@ CONFIG_MIGHT_HAVE_CACHE_L2X0=y
 CONFIG_MIGHT_HAVE_PCI=y
 CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MTD_BCM47XX_PARTS=y
+CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_BRCMNAND=y
 CONFIG_MTD_NAND_ECC=y
 # CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MTD_SPI_BCM53XXSPIFLASH=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_SPLIT_SEAMA_FW=y
diff --git a/target/linux/bcm53xx/patches-4.4/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch b/target/linux/bcm53xx/patches-4.4/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch
deleted file mode 100644 (file)
index 487e64f..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/mtd/spi-nor/Kconfig
-+++ b/drivers/mtd/spi-nor/Kconfig
-@@ -41,4 +41,10 @@ config SPI_NXP_SPIFI
-         Flash. Enable this option if you have a device with a SPIFI
-         controller and want to access the Flash as a mtd device.
-+config MTD_SPI_BCM53XXSPIFLASH
-+      tristate "SPI-NOR flashes connected to the Broadcom ARM SoC"
-+      depends on MTD_SPI_NOR
-+      help
-+        SPI driver for flashes used on Broadcom ARM SoCs.
-+
- endif # MTD_SPI_NOR
---- a/drivers/mtd/spi-nor/Makefile
-+++ b/drivers/mtd/spi-nor/Makefile
-@@ -1,3 +1,4 @@
- obj-$(CONFIG_MTD_SPI_NOR)     += spi-nor.o
- obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o
-+obj-$(CONFIG_MTD_SPI_BCM53XXSPIFLASH) += bcm53xxspiflash.o
- obj-$(CONFIG_SPI_NXP_SPIFI)   += nxp-spifi.o
diff --git a/target/linux/bcm53xx/patches-4.4/820-spi-bcm53xx-let-DT-specify-SPI-device-s-instead-hard.patch b/target/linux/bcm53xx/patches-4.4/820-spi-bcm53xx-let-DT-specify-SPI-device-s-instead-hard.patch
new file mode 100644 (file)
index 0000000..0519c1b
--- /dev/null
@@ -0,0 +1,41 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Subject: [PATCH] spi: bcm53xx: let DT specify SPI device(s) instead hardcoding
+ them
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+
+--- a/drivers/spi/spi-bcm53xx.c
++++ b/drivers/spi/spi-bcm53xx.c
+@@ -275,10 +275,6 @@ static int bcm53xxspi_flash_read(struct spi_device *spi,
+  * BCMA
+  **************************************************/
+-static struct spi_board_info bcm53xx_info = {
+-      .modalias       = "bcm53xxspiflash",
+-};
+-
+ static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = {
+       BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS),
+       {},
+@@ -300,6 +296,7 @@ static int bcm53xxspi_bcma_probe(struct bcma_device *core)
+       master = spi_alloc_master(dev, sizeof(*b53spi));
+       if (!master)
+               return -ENOMEM;
++      master->dev.of_node = dev->of_node;
+       b53spi = spi_master_get_devdata(master);
+       b53spi->master = master;
+@@ -324,9 +321,6 @@ static int bcm53xxspi_bcma_probe(struct bcma_device *core)
+               return err;
+       }
+-      /* Broadcom SoCs (at least with the CC rev 42) use SPI for flash only */
+-      spi_new_device(master, &bcm53xx_info);
+-
+       return 0;
+ }