sunxi: change bananapro DTS to use the already published patch, clean up 3.18 config...
authorZoltan Herpai <wigyori@uid0.hu>
Sat, 10 Jan 2015 19:56:30 +0000 (19:56 +0000)
committerZoltan Herpai <wigyori@uid0.hu>
Sat, 10 Jan 2015 19:56:30 +0000 (19:56 +0000)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43922

target/linux/sunxi/config-3.18
target/linux/sunxi/patches-3.18/301-add-bananapro.diff [deleted file]
target/linux/sunxi/patches-3.18/301-dt-sun7i-add-bananapro.patch [new file with mode: 0644]

index 44b5d89..68f1593 100644 (file)
@@ -129,12 +129,6 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_UART_8250 is not set
 # CONFIG_DEBUG_UART_PL01X is not set
 # CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZ4=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_DEADLINE is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
@@ -163,7 +157,6 @@ CONFIG_FRAME_WARN=2048
 CONFIG_FREEZER=y
 CONFIG_FS_MBCACHE=y
 CONFIG_FS_POSIX_ACL=y
-CONFIG_GARP=y
 CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -250,7 +243,6 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_I2C_SUN6I_P2WI is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_IMX_IPUV3_CORE is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_INPUT=y
 # CONFIG_INPUT_AXP20X_PEK is not set
@@ -260,23 +252,15 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_INTEL_SOC_PMIC is not set
 CONFIG_IOMMU_HELPER=y
 CONFIG_IOSCHED_CFQ=y
 CONFIG_IPC_NS=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_BOOTP is not set
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_RARP is not set
 CONFIG_IRQCHIP=y
 CONFIG_IRQ_DOMAIN=y
 CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_WORK=y
 CONFIG_JBD2=y
 CONFIG_KALLSYMS=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_XZ is not set
 CONFIG_KERNFS=y
 # CONFIG_KEYBOARD_GPIO is not set
 CONFIG_KEYBOARD_SUN4I_LRADC=y
@@ -390,12 +374,6 @@ CONFIG_QUOTA_NETLINK_INTERFACE=y
 # CONFIG_RCU_BOOST is not set
 CONFIG_RCU_CPU_STALL_VERBOSE=y
 CONFIG_RCU_STALL_COMMON=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZ4=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
 CONFIG_REGMAP=y
 CONFIG_REGMAP_I2C=y
 CONFIG_REGMAP_IRQ=y
@@ -417,6 +395,7 @@ CONFIG_SATA_AHCI_PLATFORM=y
 CONFIG_SCHED_HRTICK=y
 CONFIG_SCSI=y
 CONFIG_SDIO_UART=y
+# CONFIG_SECCOMP is not set
 CONFIG_SECURITYFS=y
 # CONFIG_SENSORS_PWM_FAN is not set
 CONFIG_SERIAL_8250_DW=y
@@ -456,24 +435,10 @@ CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_TASK_XACCT=y
-# CONFIG_TCP_CONG_ADVANCED is not set
 # CONFIG_THUMB2_KERNEL is not set
 CONFIG_TICK_CPU_ACCOUNTING=y
 CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EGALAX is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_ST1232 is not set
 CONFIG_TOUCHSCREEN_SUN4I=y
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
 CONFIG_TREE_PREEMPT_RCU=y
 CONFIG_UEVENT_HELPER_PATH=""
 CONFIG_UID16=y
@@ -496,7 +461,6 @@ CONFIG_UTS_NS=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_VFP=y
 CONFIG_VFPv3=y
-CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
@@ -509,10 +473,6 @@ CONFIG_XPS=y
 CONFIG_XZ_DEC_ARM=y
 CONFIG_XZ_DEC_ARMTHUMB=y
 CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_X86=y
 CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/sunxi/patches-3.18/301-add-bananapro.diff b/target/linux/sunxi/patches-3.18/301-add-bananapro.diff
deleted file mode 100644 (file)
index 47454e9..0000000
+++ /dev/null
@@ -1,247 +0,0 @@
-diff -ruN old/arch/arm/boot/dts/Makefile new/arch/arm/boot/dts/Makefile
---- old/arch/arm/boot/dts/Makefile     2015-01-06 09:29:23.612462619 +0100
-+++ new/arch/arm/boot/dts/Makefile     2015-01-06 09:29:36.316254352 +0100
-@@ -436,6 +436,7 @@
-       sun6i-a31-m9.dtb
- dtb-$(CONFIG_MACH_SUN7I) += \
-       sun7i-a20-bananapi.dtb \
-+      sun7i-a20-bananapro.dtb \
-       sun7i-a20-cubieboard2.dtb \
-       sun7i-a20-cubietruck.dtb \
-       sun7i-a20-hummingbird.dtb \
-diff -ruN old/arch/arm/boot/dts/sun7i-a20-bananapro.dts new/arch/arm/boot/dts/sun7i-a20-bananapro.dts
---- old/arch/arm/boot/dts/sun7i-a20-bananapro.dts      1970-01-01 01:00:00.000000000 +0100
-+++ new/arch/arm/boot/dts/sun7i-a20-bananapro.dts      2015-01-06 09:31:18.290582574 +0100
-@@ -0,0 +1,232 @@
-+/*
-+ * Copyright 2014 Zoltan HERPAI <wigyori@uid0.hu>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This library is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This library is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ *     You should have received a copy of the GNU General Public
-+ *     License along with this library; if not, write to the Free
-+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
-+ *     MA 02110-1301 USA
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+/include/ "sun7i-a20.dtsi"
-+/include/ "sunxi-common-regulators.dtsi"
-+
-+/ {
-+      model = "LeMaker Banana Pro";
-+      compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
-+
-+      soc@01c00000 {
-+              spi0: spi@01c05000 {
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&spi0_pins_a>;
-+                      status = "okay";
-+              };
-+
-+              mmc0: mmc@01c0f000 {
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
-+                      vmmc-supply = <&reg_vcc3v3>;
-+                      bus-width = <4>;
-+                      cd-gpios = <&pio 7 10 0>; /* PH10 */
-+                      cd-inverted;
-+                      status = "okay";
-+              };
-+
-+              mmc3: mmc@01c12000 {
-+                      #address-cells = <1>;
-+                      #size-cells = <0>;
-+
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&mmc3_pins_a>
-+                      vmmc-supply = <&reg_vmmc3>;
-+                      bus-width = <4>;
-+                      non-removable;
-+                      status = "okay";
-+
-+                      brcmf: bcrmf@1 {
-+                              reg = <1>;
-+                              ccompatible = "brcm,bcm4329-fmac";
-+                              interrupt-parent = <&pio>;
-+                              interrupts = <10 8>; /* PH10 / EINT10 * taken from https://github.com/Bananian/fex/blob/master/BananaPro/BananaPro.fex.otg-off */
-+                              interrupt-names = "host-wake";
-+                      };
-+              };
-+
-+              usbphy: phy@01c13400 {
-+                      usb1_vbus-supply = <&reg_usb1_vbus>;
-+                      usb2_vbus-supply = <&reg_usb2_vbus>;
-+                      status = "okay";
-+              };
-+
-+              ehci0: usb@01c14000 {
-+                      status = "okay";
-+              };
-+
-+              ohci0: usb@01c14400 {
-+                      status = "okay";
-+              };
-+
-+              ahci: sata@01c18000 {
-+                      status = "okay";
-+              };
-+
-+              ehci1: usb@01c1c000 {
-+                      status = "okay";
-+              };
-+
-+              ohci1: usb@01c1c400 {
-+                      status = "okay";
-+              };
-+
-+              pinctrl@01c20800 {
-+                      mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
-+                              allwinner,pins = "PH10";
-+                              allwinner,function = "gpio_in";
-+                              allwinner,drive = <0>;
-+                              allwinner,pull = <1>;
-+                      };
-+
-+                      gmac_power_pin_bananapro: gmac_power_pin@0 {
-+                              allwinner,pins = "PH23";
-+                              allwinner,function = "gpio_out";
-+                              allwinner,drive = <0>;
-+                              allwinner,pull = <0>;
-+                      };
-+
-+                      led_pins_bananapro: led_pins@0 {
-+                              allwinner,pins = "PH24";
-+                              allwinner,function = "gpio_out";
-+                              allwinner,drive = <0>;
-+                              allwinner,pull = <0>;
-+                      };
-+              };
-+
-+              ir0: ir@01c21800 {
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&ir0_pins_a>;
-+                      status = "okay";
-+              };
-+
-+              uart0: serial@01c28000 {
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&uart0_pins_a>;
-+                      status = "okay";
-+              };
-+
-+              uart3: serial@01c28c00 {
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&uart3_pins_b>;
-+                      status = "okay";
-+              };
-+
-+              uart7: serial@01c29c00 {
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&uart7_pins_a>;
-+                      status = "okay";
-+              };
-+
-+              i2c0: i2c@01c2ac00 {
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&i2c0_pins_a>;
-+                      status = "okay";
-+
-+                      axp209: pmic@34 {
-+                              compatible = "x-powers,axp209";
-+                              reg = <0x34>;
-+                              interrupt-parent = <&nmi_intc>;
-+                              interrupts = <0 8>;
-+
-+                              interrupt-controller;
-+                              #interrupt-cells = <1>;
-+                      };
-+              };
-+
-+              i2c2: i2c@01c2b400 {
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&i2c2_pins_a>;
-+                      status = "okay";
-+              };
-+
-+              gmac: ethernet@01c50000 {
-+                      pinctrl-names = "default";
-+                      pinctrl-0 = <&gmac_pins_rgmii_a>;
-+                      phy = <&phy1>;
-+                      phy-mode = "rgmii";
-+                      phy-supply = <&reg_gmac_3v3>;
-+                      status = "okay";
-+
-+                      phy1: ethernet-phy@1 {
-+                              reg = <1>;
-+                      };
-+              };
-+      };
-+
-+      leds {
-+              compatible = "gpio-leds";
-+              pinctrl-names = "default";
-+              pinctrl-0 = <&led_pins_bananapro>;
-+
-+              green {
-+                      label = "bananapro:green:usr";
-+                      gpios = <&pio 7 24 0>;
-+              };
-+      };
-+
-+      reg_usb1_vbus: usb1-vbus {
-+              status = "okay";
-+      };
-+
-+      reg_usb2_vbus: usb2-vbus {
-+              status = "okay";
-+      };
-+
-+      reg_gmac_3v3: gmac-3v3 {
-+              compatible = "regulator-fixed";
-+              pinctrl-names = "default";
-+              pinctrl-0 = <&gmac_power_pin_bananapro>;
-+              regulator-name = "gmac-3v3";
-+              regulator-min-microvolt = <3300000>;
-+              regulator-max-microvolt = <3300000>;
-+              startup-delay-us = <50000>;
-+              enable-active-high;
-+              gpio = <&pio 7 23 0>;
-+      };
-+};
diff --git a/target/linux/sunxi/patches-3.18/301-dt-sun7i-add-bananapro.patch b/target/linux/sunxi/patches-3.18/301-dt-sun7i-add-bananapro.patch
new file mode 100644 (file)
index 0000000..70283a5
--- /dev/null
@@ -0,0 +1,296 @@
+From 3613d535a77270eaf15a5f988a48434c7d1530f2 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Wed, 7 Jan 2015 20:44:52 +0100
+Subject: [PATCH] ARM: dts: sun7i: Add dts file for Bananapro board
+
+Add support for the new Bananapro A20 development board from lemaker.org.
+This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for
+OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver,
+3.5 mm jack for a/v out, on board microphone, 40 gpio pins and sdio wifi.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ arch/arm/boot/dts/Makefile                |   1 +
+ arch/arm/boot/dts/sun7i-a20-bananapro.dts | 261 ++++++++++++++++++++++++++++++
+ 2 files changed, 262 insertions(+)
+ create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapro.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 40d2901..b3dcf3f 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -466,6 +466,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
+       sun6i-a31s-cs908.dtb
+ dtb-$(CONFIG_MACH_SUN7I) += \
+       sun7i-a20-bananapi.dtb \
++      sun7i-a20-bananapro.dtb \
+       sun7i-a20-cubieboard2.dtb \
+       sun7i-a20-cubietruck.dtb \
+       sun7i-a20-hummingbird.dtb \
+diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+new file mode 100644
+index 0000000..3b4764d
+--- /dev/null
++++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+@@ -0,0 +1,261 @@
++/*
++ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This file is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License, or (at your option) any later version.
++ *
++ *     This file is distributed in the hope that it will be useful,
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ *     You should have received a copy of the GNU General Public
++ *     License along with this file; if not, write to the Free
++ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
++ *     MA 02110-1301 USA
++ *
++ * Or, alternatively,
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use,
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++/include/ "sun7i-a20.dtsi"
++/include/ "sunxi-common-regulators.dtsi"
++
++/ {
++      model = "LeMaker Banana Pro";
++      compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
++
++      soc@01c00000 {
++              spi0: spi@01c05000 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&spi0_pins_a>;
++                      status = "okay";
++              };
++
++              mmc0: mmc@01c0f000 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
++                      vmmc-supply = <&reg_vcc3v3>;
++                      bus-width = <4>;
++                      cd-gpios = <&pio 7 10 0>; /* PH10 */
++                      cd-inverted;
++                      status = "okay";
++              };
++
++              mmc3: mmc@01c12000 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&mmc3_pins_a>;
++                      vmmc-supply = <&reg_vmmc3>;
++                      bus-width = <4>;
++                      non-removable;
++                      status = "okay";
++              };
++
++              usbphy: phy@01c13400 {
++                      usb1_vbus-supply = <&reg_usb1_vbus>;
++                      usb2_vbus-supply = <&reg_usb2_vbus>;
++                      status = "okay";
++              };
++
++              ehci0: usb@01c14000 {
++                      status = "okay";
++              };
++
++              ohci0: usb@01c14400 {
++                      status = "okay";
++              };
++
++              ahci: sata@01c18000 {
++                      status = "okay";
++              };
++
++              ehci1: usb@01c1c000 {
++                      status = "okay";
++              };
++
++              ohci1: usb@01c1c400 {
++                      status = "okay";
++              };
++
++              pinctrl@01c20800 {
++                      usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
++                              allwinner,pins = "PH0";
++                              allwinner,function = "gpio_out";
++                              allwinner,drive = <0>;
++                              allwinner,pull = <0>;
++                      };
++
++                      usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
++                              allwinner,pins = "PH1";
++                              allwinner,function = "gpio_out";
++                              allwinner,drive = <0>;
++                              allwinner,pull = <0>;
++                      };
++
++                      mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
++                              allwinner,pins = "PH10";
++                              allwinner,function = "gpio_in";
++                              allwinner,drive = <0>;
++                              allwinner,pull = <1>;
++                      };
++
++                      vmmc3_pin_bananapro: vmmc3_pin@0 {
++                              allwinner,pins = "PH22";
++                              allwinner,function = "gpio_out";
++                              allwinner,drive = <0>;
++                              allwinner,pull = <0>;
++                      };
++
++                      gmac_power_pin_bananapi: gmac_power_pin@0 {
++                              allwinner,pins = "PH23";
++                              allwinner,function = "gpio_out";
++                              allwinner,drive = <0>;
++                              allwinner,pull = <0>;
++                      };
++
++                      led_pins_bananapi: led_pins@0 {
++                              allwinner,pins = "PH24", "PG2";
++                              allwinner,function = "gpio_out";
++                              allwinner,drive = <0>;
++                              allwinner,pull = <0>;
++                      };
++              };
++
++              ir0: ir@01c21800 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&ir0_pins_a>;
++                      status = "okay";
++              };
++
++              uart0: serial@01c28000 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&uart0_pins_a>;
++                      status = "okay";
++              };
++
++              uart2: serial@01c28800 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&uart2_pins_a>;
++                      status = "okay";
++              };
++
++              uart7: serial@01c29c00 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&uart7_pins_a>;
++                      status = "okay";
++              };
++
++              i2c0: i2c@01c2ac00 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&i2c0_pins_a>;
++                      status = "okay";
++
++                      axp209: pmic@34 {
++                              compatible = "x-powers,axp209";
++                              reg = <0x34>;
++                              interrupt-parent = <&nmi_intc>;
++                              interrupts = <0 8>;
++
++                              interrupt-controller;
++                              #interrupt-cells = <1>;
++                      };
++              };
++
++              i2c2: i2c@01c2b400 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&i2c2_pins_a>;
++                      status = "okay";
++              };
++
++              gmac: ethernet@01c50000 {
++                      pinctrl-names = "default";
++                      pinctrl-0 = <&gmac_pins_rgmii_a>;
++                      phy = <&phy1>;
++                      phy-mode = "rgmii";
++                      phy-supply = <&reg_gmac_3v3>;
++                      status = "okay";
++
++                      phy1: ethernet-phy@1 {
++                              reg = <1>;
++                      };
++              };
++      };
++
++      leds {
++              compatible = "gpio-leds";
++              pinctrl-names = "default";
++              pinctrl-0 = <&led_pins_bananapi>;
++
++              green {
++                      label = "bananapi:green:usr";
++                      gpios = <&pio 7 24 0>;
++              };
++              blue {
++                      label = "bananapi:blue:usr";
++                      gpios = <&pio 6 2 0>;
++              };
++      };
++
++      reg_usb1_vbus: usb1-vbus {
++              pinctrl-0 = <&usb1_vbus_pin_bananapro>;
++              gpio = <&pio 7 0 0>; /* PH0 */
++              status = "okay";
++      };
++
++      reg_usb2_vbus: usb2-vbus {
++              pinctrl-0 = <&usb2_vbus_pin_bananapro>;
++              gpio = <&pio 7 1 0>; /* PH1 */
++              status = "okay";
++      };
++
++      reg_gmac_3v3: gmac-3v3 {
++              compatible = "regulator-fixed";
++              pinctrl-names = "default";
++              pinctrl-0 = <&gmac_power_pin_bananapi>;
++              regulator-name = "gmac-3v3";
++              regulator-min-microvolt = <3300000>;
++              regulator-max-microvolt = <3300000>;
++              startup-delay-us = <100000>;
++              enable-active-high;
++              gpio = <&pio 7 23 0>;
++      };
++
++      reg_vmmc3: vmmc3 {
++              compatible = "regulator-fixed";
++              pinctrl-names = "default";
++              pinctrl-0 = <&vmmc3_pin_bananapro>;
++              regulator-name = "vmmc3";
++              regulator-min-microvolt = <3300000>;
++              regulator-max-microvolt = <3300000>;
++              enable-active-high;
++              gpio = <&pio 7 22 0>;
++      };
++};