ipq806x: Add support for Netgear D7800
authorJohn Crispin <john@openwrt.org>
Tue, 19 Jan 2016 10:16:36 +0000 (10:16 +0000)
committerJohn Crispin <john@openwrt.org>
Tue, 19 Jan 2016 10:16:36 +0000 (10:16 +0000)
Signed-off-by: Tathagata Das <tathagata@alumnux.com>
SVN-Revision: 48360

target/linux/ipq806x/base-files/etc/board.d/01_leds
target/linux/ipq806x/base-files/etc/board.d/02_network
target/linux/ipq806x/base-files/lib/ipq806x.sh
target/linux/ipq806x/base-files/lib/upgrade/platform.sh
target/linux/ipq806x/image/Makefile
target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch [new file with mode: 0644]
target/linux/ipq806x/profiles/netgear.mk

index 07b5b06..b32c1cc 100755 (executable)
@@ -11,6 +11,7 @@ board_config_update
 board=$(ipq806x_board_name)
 
 case "$board" in
+d7800 |\
 r7500)
        ucidef_set_led_usbdev "usb1" "USB 1" "r7500:white:usb1" "1-1"
        ucidef_set_led_usbdev "usb2" "USB 2" "r7500:white:usb3" "3-1"
index 1302a55..6e18297 100755 (executable)
@@ -13,6 +13,7 @@ board=$(ipq806x_board_name)
 
 case "$board" in
 ap148 |\
+d7800 |\
 r7500)
        ucidef_add_switch "switch0" \
                "1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
index 5b27bde..db22708 100644 (file)
@@ -17,6 +17,9 @@ ipq806x_board_detect() {
        *"AP148")
                name="ap148"
                ;;
+       *"D7800")
+               name="d7800"
+               ;;
        *"DB149")
                name="db149"
                ;;
index 7fcf246..542b5ce 100644 (file)
@@ -7,6 +7,7 @@ platform_check_image() {
 
        case "$board" in
        ap148 |\
+       d7800 |\
        r7500)
                nand_do_platform_check $board $1
                return $?;
@@ -21,6 +22,7 @@ platform_pre_upgrade() {
 
        case "$board" in
        ap148 |\
+       d7800 |\
        r7500)
                nand_do_upgrade "$1"
                ;;
index 58c4e1e..ff8b2c7 100644 (file)
@@ -104,6 +104,17 @@ define Device/AP148-legacy
        BOARD_NAME := ap148
 endef
 
+define Device/D7800
+       $(call Device/DniImage)
+       DEVICE_DTS := qcom-ipq8064-d7800
+       KERNEL_SIZE := 2097152
+       NETGEAR_BOARD_ID := D7800
+       NETGEAR_HW_ID := 29764958+0+128+512+4x4+4x4
+       BLOCKSIZE := 128KiB
+       PAGESIZE := 2048
+       BOARD_NAME := d7800
+endef
+
 define Device/DB149
        $(call Device/FitImage)
        DEVICE_DTS := qcom-ipq8064-db149
@@ -122,6 +133,6 @@ define Device/R7500
        BOARD_NAME := r7500
 endef
 
-TARGET_DEVICES += AP148 AP148-legacy DB149 R7500
+TARGET_DEVICES += AP148 AP148-legacy D7800 DB149 R7500
 
 $(eval $(call BuildImage))
diff --git a/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch b/target/linux/ipq806x/patches-3.18/801-ARM-qcom-add-Netgear-Nighthawk-X4-D7800-device-tree.patch
new file mode 100644 (file)
index 0000000..ecc1cff
--- /dev/null
@@ -0,0 +1,381 @@
+--- a/arch/arm/boot/dts/Makefile       2015-09-22 18:30:09.033530282 +0530
++++ b/arch/arm/boot/dts/Makefile       2015-09-23 17:06:44.892947581 +0530
+@@ -362,6 +362,7 @@
+       qcom-ipq8064-ap148.dtb \
+       qcom-ipq8064-db149.dtb \
+       qcom-ipq8064-r7500.dtb \
++      qcom-ipq8064-d7800.dtb \
+       qcom-msm8660-surf.dtb \
+       qcom-msm8960-cdp.dtb \
+       qcom-msm8974-sony-xperia-honami.dtb
+--- a/arch/arm/boot/dts/qcom-ipq8064-d7800.dts 1970-01-01 05:30:00.000000000 +0530
++++ b/arch/arm/boot/dts/qcom-ipq8064-d7800.dts 2015-09-23 17:06:45.336947567 +0530
+@@ -0,0 +1,368 @@
++#include "qcom-ipq8064-v1.0.dtsi"
++
++#include <dt-bindings/input/input.h>
++
++/ {
++      model = "Netgear Nighthawk X4 D7800";
++      compatible = "netgear,d7800", "qcom,ipq8064";
++
++      memory@0 {
++              reg = <0x42000000 0xe000000>;
++              device_type = "memory";
++      };
++
++      reserved-memory {
++              #address-cells = <1>;
++              #size-cells = <1>;
++              ranges;
++              rsvd@41200000 {
++                      reg = <0x41200000 0x300000>;
++                      no-map;
++              };
++      };
++
++      aliases {
++              serial0 = &uart4;
++              mdio-gpio0 = &mdio0;
++      };
++
++      chosen {
++              bootargs = "rootfstype=squashfs noinitrd";
++              linux,stdout-path = "serial0:115200n8";
++      };
++
++      soc {
++              pinmux@800000 {
++                      i2c4_pins: i2c4_pinmux {
++                              pins = "gpio12", "gpio13";
++                              function = "gsbi4";
++                              bias-disable;
++                      };
++
++                      pcie0_pins: pcie0_pinmux {
++                              mux {
++                                      pins = "gpio3";
++                                      function = "pcie1_rst";
++                                      drive-strength = <12>;
++                                      bias-disable;
++                              };
++                      };
++
++                      pcie1_pins: pcie1_pinmux {
++                              mux {
++                                      pins = "gpio48";
++                                      function = "pcie2_rst";
++                                      drive-strength = <12>;
++                                      bias-disable;
++                              };
++                      };
++
++                      nand_pins: nand_pins {
++                              mux {
++                                      pins = "gpio34", "gpio35", "gpio36",
++                                             "gpio37", "gpio38", "gpio39",
++                                             "gpio40", "gpio41", "gpio42",
++                                             "gpio43", "gpio44", "gpio45",
++                                             "gpio46", "gpio47";
++                                      function = "nand";
++                                      drive-strength = <10>;
++                                      bias-disable;
++                              };
++                              pullups {
++                                      pins = "gpio39";
++                                      bias-pull-up;
++                              };
++                              hold {
++                                      pins = "gpio40", "gpio41", "gpio42",
++                                             "gpio43", "gpio44", "gpio45",
++                                             "gpio46", "gpio47";
++                                      bias-bus-hold;
++                              };
++                      };
++
++                      mdio0_pins: mdio0_pins {
++                              mux {
++                                      pins = "gpio0", "gpio1";
++                                      function = "gpio";
++                                      drive-strength = <8>;
++                                      bias-disable;
++                              };
++                      };
++
++                      rgmii2_pins: rgmii2_pins {
++                              mux {
++                                      pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
++                                             "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
++                                      function = "rgmii2";
++                                      drive-strength = <8>;
++                                      bias-disable;
++                              };
++                      };
++              };
++
++              gsbi@16300000 {
++                      qcom,mode = <GSBI_PROT_I2C_UART>;
++                      status = "ok";
++                      serial@16340000 {
++                              status = "ok";
++                      };
++                      /*
++                       * The i2c device on gsbi4 should not be enabled.
++                       * On ipq806x designs gsbi4 i2c is meant for exclusive
++                       * RPM usage. Turning this on in kernel manifests as
++                       * i2c failure for the RPM.
++                       */
++              };
++
++              sata-phy@1b400000 {
++                      status = "ok";
++              };
++
++              sata@29000000 {
++                      status = "ok";
++              };
++
++              phy@100f8800 {          /* USB3 port 1 HS phy */
++                      status = "ok";
++              };
++
++              phy@100f8830 {          /* USB3 port 1 SS phy */
++                      status = "ok";
++              };
++
++              phy@110f8800 {          /* USB3 port 0 HS phy */
++                      status = "ok";
++              };
++
++              phy@110f8830 {          /* USB3 port 0 SS phy */
++                      status = "ok";
++              };
++
++              usb30@0 {
++                      status = "ok";
++              };
++
++              usb30@1 {
++                      status = "ok";
++              };
++
++              pcie0: pci@1b500000 {
++                      status = "ok";
++                      reset-gpio = <&qcom_pinmux 3 0>;
++                      pinctrl-0 = <&pcie0_pins>;
++                      pinctrl-names = "default";
++              };
++
++              pcie1: pci@1b700000 {
++                      status = "ok";
++                      reset-gpio = <&qcom_pinmux 48 0>;
++                      pinctrl-0 = <&pcie1_pins>;
++                      pinctrl-names = "default";
++              };
++
++              nand@1ac00000 {
++                      status = "ok";
++
++                      pinctrl-0 = <&nand_pins>;
++                      pinctrl-names = "default";
++
++                      nand-ecc-strength = <4>;
++                      nand-bus-width = <8>;
++
++                      #address-cells = <1>;
++                      #size-cells = <1>;
++
++                      qcadata@0 {
++                              label = "qcadata";
++                              reg = <0x0000000 0x0c80000>;
++                              read-only;
++                      };
++
++                      APPSBL@c80000 {
++                              label = "APPSBL";
++                              reg = <0x0c80000 0x0500000>;
++                              read-only;
++                      };
++
++                      APPSBLENV@1180000 {
++                              label = "APPSBLENV";
++                              reg = <0x1180000 0x0080000>;
++                              read-only;
++                      };
++
++                      art: art@1200000 {
++                              label = "art";
++                              reg = <0x1200000 0x0140000>;
++                              read-only;
++                      };
++
++                      artbak: art@1340000 {
++                              label = "artbak";
++                              reg = <0x1340000 0x0140000>;
++                              read-only;
++                      };
++
++                      kernel@1480000 {
++                              label = "kernel";
++                              reg = <0x1480000 0x0200000>;
++                      };
++
++                      ubi@1680000 {
++                              label = "ubi";
++                              reg = <0x1680000 0x1E00000>;
++                      };
++
++                      netgear@3480000 {
++                              label = "netgear";
++                              reg = <0x3480000 0x4480000>;
++                              read-only;
++                      };
++
++                      reserve@7900000 {
++                              label = "reserve";
++                              reg = <0x7900000 0x0700000>;
++                              read-only;
++                      };
++
++                      firmware@1480000 {
++                              label = "firmware";
++                              reg = <0x1480000 0x2000000>;
++                      };
++
++              };
++
++              mdio0: mdio {
++                      compatible = "virtual,mdio-gpio";
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
++                      pinctrl-0 = <&mdio0_pins>;
++                      pinctrl-names = "default";
++
++                      phy0: ethernet-phy@0 {
++                              device_type = "ethernet-phy";
++                              reg = <0>;
++                              qca,ar8327-initvals = <
++                                      0x00004 0x7600000   /* PAD0_MODE */
++                                      0x00008 0x1000000   /* PAD5_MODE */
++                                      0x0000c 0x80        /* PAD6_MODE */
++                                      0x000e4 0xaa545     /* MAC_POWER_SEL */
++                                      0x000e0 0xc74164de  /* SGMII_CTRL */
++                                      0x0007c 0x4e        /* PORT0_STATUS */
++                                      0x00094 0x4e        /* PORT6_STATUS */
++                                      >;
++                      };
++
++                      phy4: ethernet-phy@4 {
++                              device_type = "ethernet-phy";
++                              reg = <4>;
++                      };
++              };
++
++              gmac1: ethernet@37200000 {
++                      status = "ok";
++                      phy-mode = "rgmii";
++                      phy-handle = <&phy4>;
++                      qcom,id = <1>;
++
++                      pinctrl-0 = <&rgmii2_pins>;
++                      pinctrl-names = "default";
++
++                      mtd-mac-address = <&art 6>;
++              };
++
++              gmac2: ethernet@37400000 {
++                      status = "ok";
++                      phy-mode = "sgmii";
++                      qcom,id = <2>;
++
++                      mtd-mac-address = <&art 0>;
++
++                      fixed-link {
++                              speed = <1000>;
++                              full-duplex;
++                      };
++              };
++      };
++
++      gpio-keys {
++              compatible = "gpio-keys";
++
++              wifi {
++                      label = "wifi";
++                      gpios = <&qcom_pinmux 6 1>;
++                      linux,code = <KEY_WLAN>;
++              };
++
++              reset {
++                      label = "reset";
++                      gpios = <&qcom_pinmux 54 1>;
++                      linux,code = <KEY_RESTART>;
++              };
++
++              wps {
++                      label = "wps";
++                      gpios = <&qcom_pinmux 65 1>;
++                      linux,code = <KEY_WPS_BUTTON>;
++              };
++      };
++
++      gpio-leds {
++              compatible = "gpio-leds";
++
++              usb1 {
++                      label = "d7800:amber:usb1";
++                      gpios = <&qcom_pinmux 7 0>;
++              };
++
++              usb3 {
++                      label = "d7800:amber:usb3";
++                      gpios = <&qcom_pinmux 8 0>;
++              };
++
++              status {
++                      label = "d7800:amber:status";
++                      gpios = <&qcom_pinmux 9 0>;
++              };
++
++              internet {
++                      label = "d7800:white:internet";
++                      gpios = <&qcom_pinmux 22 0>;
++              };
++
++              wan {
++                      label = "d7800:white:wan";
++                      gpios = <&qcom_pinmux 23 0>;
++              };
++
++              wps {
++                      label = "d7800:white:wps";
++                      gpios = <&qcom_pinmux 24 0>;
++              };
++
++              esata {
++                      label = "d7800:white:esata";
++                      gpios = <&qcom_pinmux 26 0>;
++              };
++
++              power {
++                      label = "d7800:white:power";
++                      gpios = <&qcom_pinmux 53 0>;
++                      default-state = "on";
++              };
++
++              rfkill {
++                      label = "d7800:white:rfkill";
++                      gpios = <&qcom_pinmux 64 0>;
++              };
++
++              wifi5g {
++                      label = "d7800:white:wifi5g";
++                      gpios = <&qcom_pinmux 67 0>;
++              };
++      };
++};
++
++&adm_dma {
++      status = "ok";
++};
index 3402f45..25258cd 100644 (file)
@@ -6,6 +6,18 @@
 # See /LICENSE for more information.
 #
 
+define Profile/D7800
+       NAME:=Netgear Nighthawk X4 D7800
+       PACKAGES:= \
+               kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev \
+               kmod-usb3 kmod-usb-dwc3-qcom kmod-usb-phy-qcom-dwc3 \
+               kmod-ath10k wpad-mini ath10k-firmware-qca99x0
+endef
+
+define Profile/D7800/Description
+       Package set for the Netgear Nighthawk X4 D7800.
+endef
+
 define Profile/R7500
        NAME:=Netgear Nighthawk X4 R7500
        PACKAGES:= \
@@ -17,4 +29,5 @@ endef
 define Profile/R7500/Description
        Package set for the Netgear Nighthawk X4 R7500.
 endef
+$(eval $(call Profile,D7800))
 $(eval $(call Profile,R7500))