+This patch moves initialisation of EHCI/I2C/UART platform devices
+from the common orion5x_init() into the board support code.
+
+The rationale behind this is that only the board support code knows
+whether certain peripherals have been brought out on the board, and
+not initialising peripherals that haven't been brought out is
+desirable for example:
+- to reduce user confusion (e.g. seeing both 'eth0' and 'eth1'
+ appear while there is only one ethernet port on the board); and
+- to allow for future power savings (peripherals that have not
+ been brought out can be clock gated off entirely.)
+
+Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
+---
+ arch/arm/mach-orion5x/common.c | 226 +++++++++++++++++------------
+ arch/arm/mach-orion5x/common.h | 35 ++---
+ arch/arm/mach-orion5x/db88f5281-setup.c | 39 +++---
+ arch/arm/mach-orion5x/dns323-setup.c | 40 +++---
+ arch/arm/mach-orion5x/kurobox_pro-setup.c | 28 +++--
+ arch/arm/mach-orion5x/rd88f5182-setup.c | 29 ++--
+ arch/arm/mach-orion5x/ts209-setup.c | 38 ++---
+ 7 files changed, 240 insertions(+), 195 deletions(-)
+
+--- a/arch/arm/mach-orion5x/common.c
++++ b/arch/arm/mach-orion5x/common.c
+@@ -63,65 +63,20 @@
+ iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc));
+ }
+
++
+ /*****************************************************************************
+- * UART
++ * EHCI
+ ****************************************************************************/
+-
+-static struct resource orion5x_uart_resources[] = {
+- {
+- .start = UART0_PHYS_BASE,
+- .end = UART0_PHYS_BASE + 0xff,
+- .flags = IORESOURCE_MEM,
+- }, {
+- .start = IRQ_ORION5X_UART0,
+- .end = IRQ_ORION5X_UART0,
+- .flags = IORESOURCE_IRQ,
+- }, {
+- .start = UART1_PHYS_BASE,
+- .end = UART1_PHYS_BASE + 0xff,
+- .flags = IORESOURCE_MEM,
+- }, {
+- .start = IRQ_ORION5X_UART1,
+- .end = IRQ_ORION5X_UART1,
+- .flags = IORESOURCE_IRQ,
+- },
+-};
+-
+-static struct plat_serial8250_port orion5x_uart_data[] = {
+- {
+- .mapbase = UART0_PHYS_BASE,
+- .membase = (char *)UART0_VIRT_BASE,
+- .irq = IRQ_ORION5X_UART0,
+- .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+- .iotype = UPIO_MEM,
+- .regshift = 2,
+- .uartclk = ORION5X_TCLK,
+- }, {
+- .mapbase = UART1_PHYS_BASE,
+- .membase = (char *)UART1_VIRT_BASE,
+- .irq = IRQ_ORION5X_UART1,
+- .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+- .iotype = UPIO_MEM,
+- .regshift = 2,
+- .uartclk = ORION5X_TCLK,
+- }, {
+- },
++static struct orion_ehci_data orion5x_ehci_data = {
++ .dram = &orion5x_mbus_dram_info,
+ };
+
+-static struct platform_device orion5x_uart = {
+- .name = "serial8250",
+- .id = PLAT8250_DEV_PLATFORM,
+- .dev = {
+- .platform_data = orion5x_uart_data,
+- },
+- .resource = orion5x_uart_resources,
+- .num_resources = ARRAY_SIZE(orion5x_uart_resources),
+-};
++static u64 ehci_dmamask = 0xffffffffUL;
+
+-/*******************************************************************************
+- * USB Controller - 2 interfaces
+- ******************************************************************************/
+
++/*****************************************************************************
++ * EHCI0
++ ****************************************************************************/
+ static struct resource orion5x_ehci0_resources[] = {
+ {
+ .start = ORION5X_USB0_PHYS_BASE,
+@@ -134,24 +89,6 @@
+ },
+ };
+
+-static struct resource orion5x_ehci1_resources[] = {
+- {
+- .start = ORION5X_USB1_PHYS_BASE,
+- .end = ORION5X_USB1_PHYS_BASE + SZ_4K - 1,
+- .flags = IORESOURCE_MEM,
+- }, {
+- .start = IRQ_ORION5X_USB1_CTRL,
+- .end = IRQ_ORION5X_USB1_CTRL,
+- .flags = IORESOURCE_IRQ,
+- },
+-};
+-
+-static struct orion_ehci_data orion5x_ehci_data = {
+- .dram = &orion5x_mbus_dram_info,
+-};
+-
+-static u64 ehci_dmamask = 0xffffffffUL;
+-
+ static struct platform_device orion5x_ehci0 = {
+ .name = "orion-ehci",
+ .id = 0,
+@@ -164,6 +101,27 @@
+ .num_resources = ARRAY_SIZE(orion5x_ehci0_resources),
+ };
+
++void __init orion5x_ehci0_init(void)
++{
++ platform_device_register(&orion5x_ehci0);
++}
++
++
++/*****************************************************************************
++ * EHCI1
++ ****************************************************************************/
++static struct resource orion5x_ehci1_resources[] = {
++ {
++ .start = ORION5X_USB1_PHYS_BASE,
++ .end = ORION5X_USB1_PHYS_BASE + SZ_4K - 1,
++ .flags = IORESOURCE_MEM,
++ }, {
++ .start = IRQ_ORION5X_USB1_CTRL,
++ .end = IRQ_ORION5X_USB1_CTRL,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
+ static struct platform_device orion5x_ehci1 = {
+ .name = "orion-ehci",
+ .id = 1,
+@@ -176,11 +134,15 @@
+ .num_resources = ARRAY_SIZE(orion5x_ehci1_resources),
+ };
+
++void __init orion5x_ehci1_init(void)
++{
++ platform_device_register(&orion5x_ehci1);
++}
++
++
+ /*****************************************************************************
+- * Gigabit Ethernet port
+- * (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
++ * GigE
+ ****************************************************************************/
+-
+ struct mv643xx_eth_shared_platform_data orion5x_eth_shared_data = {
+ .dram = &orion5x_mbus_dram_info,
+ .t_clk = ORION5X_TCLK,
+@@ -229,11 +191,10 @@
+ platform_device_register(&orion5x_eth);
+ }
+
++
+ /*****************************************************************************
+- * I2C controller
+- * (The Orion and Discovery (MV643xx) families share the same I2C controller)
++ * I2C
+ ****************************************************************************/
+-
+ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
+ .freq_m = 8, /* assumes 166 MHz TCLK */
+ .freq_n = 3,
+@@ -244,7 +205,7 @@
+ {
+ .name = "i2c base",
+ .start = I2C_PHYS_BASE,
+- .end = I2C_PHYS_BASE + 0x20 -1,
++ .end = I2C_PHYS_BASE + 0x1f,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "i2c irq",
+@@ -264,8 +225,14 @@
+ },
+ };
+
++void __init orion5x_i2c_init(void)
++{
++ platform_device_register(&orion5x_i2c);
++}
++
++
+ /*****************************************************************************
+- * Sata port
++ * SATA
+ ****************************************************************************/
+ static struct resource orion5x_sata_resources[] = {
+ {
+@@ -298,10 +265,98 @@
+ platform_device_register(&orion5x_sata);
+ }
+
++
+ /*****************************************************************************
+- * Time handling
++ * UART0
++ ****************************************************************************/
++static struct plat_serial8250_port orion5x_uart0_data[] = {
++ {
++ .mapbase = UART0_PHYS_BASE,
++ .membase = (char *)UART0_VIRT_BASE,
++ .irq = IRQ_ORION5X_UART0,
++ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = ORION5X_TCLK,
++ }, {
++ },
++};
++
++static struct resource orion5x_uart0_resources[] = {
++ {
++ .start = UART0_PHYS_BASE,
++ .end = UART0_PHYS_BASE + 0xff,
++ .flags = IORESOURCE_MEM,
++ }, {
++ .start = IRQ_ORION5X_UART0,
++ .end = IRQ_ORION5X_UART0,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device orion5x_uart0 = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM,
++ .dev = {
++ .platform_data = orion5x_uart0_data,
++ },
++ .resource = orion5x_uart0_resources,
++ .num_resources = ARRAY_SIZE(orion5x_uart0_resources),
++};
++
++void __init orion5x_uart0_init(void)
++{
++ platform_device_register(&orion5x_uart0);
++}
++
++
++/*****************************************************************************
++ * UART1
+ ****************************************************************************/
++static struct plat_serial8250_port orion5x_uart1_data[] = {
++ {
++ .mapbase = UART1_PHYS_BASE,
++ .membase = (char *)UART1_VIRT_BASE,
++ .irq = IRQ_ORION5X_UART1,
++ .flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
++ .iotype = UPIO_MEM,
++ .regshift = 2,
++ .uartclk = ORION5X_TCLK,
++ }, {
++ },
++};
++
++static struct resource orion5x_uart1_resources[] = {
++ {
++ .start = UART1_PHYS_BASE,
++ .end = UART1_PHYS_BASE + 0xff,
++ .flags = IORESOURCE_MEM,
++ }, {
++ .start = IRQ_ORION5X_UART1,
++ .end = IRQ_ORION5X_UART1,
++ .flags = IORESOURCE_IRQ,
++ },
++};
++
++static struct platform_device orion5x_uart1 = {
++ .name = "serial8250",
++ .id = PLAT8250_DEV_PLATFORM1,
++ .dev = {
++ .platform_data = orion5x_uart1_data,
++ },
++ .resource = orion5x_uart1_resources,
++ .num_resources = ARRAY_SIZE(orion5x_uart1_resources),
++};
++
++void __init orion5x_uart1_init(void)
++{
++ platform_device_register(&orion5x_uart1);
++}
+
++
++/*****************************************************************************
++ * Time handling
++ ****************************************************************************/
+ static void orion5x_timer_init(void)
+ {
+ orion_time_init(IRQ_ORION5X_BRIDGE, ORION5X_TCLK);
+@@ -311,10 +366,10 @@
+ .init = orion5x_timer_init,
+ };
+
++
+ /*****************************************************************************
+ * General
+ ****************************************************************************/
+-
+ /*
+ * Identify device ID and rev from PCIe configuration header space '0'.
+ */
+@@ -359,15 +414,6 @@
+ * Setup Orion address map
+ */
+ orion5x_setup_cpu_mbus_bridge();
+-
+- /*
+- * Register devices.
+- */
+- platform_device_register(&orion5x_uart);
+- platform_device_register(&orion5x_ehci0);
+- if (dev == MV88F5182_DEV_ID)
+- platform_device_register(&orion5x_ehci1);
+- platform_device_register(&orion5x_i2c);
+ }
+
+ /*
+--- a/arch/arm/mach-orion5x/common.h
++++ b/arch/arm/mach-orion5x/common.h
+@@ -1,10 +1,12 @@
+ #ifndef __ARCH_ORION5X_COMMON_H
+ #define __ARCH_ORION5X_COMMON_H
+
++struct mv643xx_eth_platform_data;
++struct mv_sata_platform_data;
++
+ /*
+ * Basic Orion init functions used early by machine-setup.
+ */
+-
+ void orion5x_map_io(void);
+ void orion5x_init_irq(void);
+ void orion5x_init(void);
+@@ -23,13 +25,19 @@
+ void orion5x_setup_dev2_win(u32 base, u32 size);
+ void orion5x_setup_pcie_wa_win(u32 base, u32 size);
+
++void orion5x_ehci0_init(void);
++void orion5x_ehci1_init(void);
++void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
++void orion5x_i2c_init(void);
++void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
++void orion5x_uart0_init(void);
++void orion5x_uart1_init(void);
++
+ /*
+- * Shared code used internally by other Orion core functions.
+- * (/mach-orion/pci.c)
++ * PCIe/PCI functions.
+ */
+-
+-struct pci_sys_data;
+ struct pci_bus;
++struct pci_sys_data;
+
+ void orion5x_pcie_id(u32 *dev, u32 *rev);
+ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
+@@ -40,26 +48,9 @@
+ * Valid GPIO pins according to MPP setup, used by machine-setup.
+ * (/mach-orion/gpio.c).
+ */
+-
+ void orion5x_gpio_set_valid_pins(u32 pins);
+ void gpio_display(void); /* debug */
+
+-/*
+- * Pull in Orion Ethernet platform_data, used by machine-setup
+- */
+-
+-struct mv643xx_eth_platform_data;
+-
+-void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
+-
+-/*
+- * Orion Sata platform_data, used by machine-setup
+- */
+-
+-struct mv_sata_platform_data;
+-
+-void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
+-
+ struct machine_desc;
+ struct meminfo;
+ struct tag;
+--- a/arch/arm/mach-orion5x/db88f5281-setup.c
++++ b/arch/arm/mach-orion5x/db88f5281-setup.c
+@@ -298,13 +298,6 @@
+ /*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+-
+-static struct platform_device *db88f5281_devs[] __initdata = {
+- &db88f5281_boot_flash,
+- &db88f5281_nor_flash,
+- &db88f5281_nand_flash,
+-};
+-
+ static void __init db88f5281_init(void)
+ {
+ /*
+@@ -313,15 +306,6 @@
+ orion5x_init();
+
+ /*
+- * Setup the CPU address decode windows for our on-board devices
+- */
+- orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
+- DB88F5281_NOR_BOOT_SIZE);
+- orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
+- orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
+- orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
+-
+- /*
+ * Setup Multiplexing Pins:
+ * MPP0: GPIO (USB Over Current) MPP1: GPIO (USB Vbat input)
+ * MPP2: PCI_REQn[2] MPP3: PCI_GNTn[2]
+@@ -342,9 +326,28 @@
+
+ orion5x_gpio_set_valid_pins(0x00003fc3);
+
+- platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs));
+- i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
++ /*
++ * Configure peripherals.
++ */
++ orion5x_ehci0_init();
+ orion5x_eth_init(&db88f5281_eth_data);
++ orion5x_i2c_init();
++ orion5x_uart0_init();
++ orion5x_uart1_init();
++
++ orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
++ DB88F5281_NOR_BOOT_SIZE);
++ platform_device_register(&db88f5281_boot_flash);
++
++ orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
++
++ orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
++ platform_device_register(&db88f5281_nor_flash);
++
++ orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
++ platform_device_register(&db88f5281_nand_flash);
++
++ i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
+ }
+
+ MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
+--- a/arch/arm/mach-orion5x/dns323-setup.c
++++ b/arch/arm/mach-orion5x/dns323-setup.c
+@@ -213,12 +213,6 @@
+ * General Setup
+ */
+
+-static struct platform_device *dns323_plat_devices[] __initdata = {
+- &dns323_nor_flash,
+- &dns323_gpio_leds,
+- &dns323_button_device,
+-};
+-
+ /*
+ * On the DNS-323 the following devices are attached via I2C:
+ *
+@@ -253,11 +247,6 @@
+ /* Setup basic Orion functions. Need to be called early. */
+ orion5x_init();
+
+- /* setup flash mapping
+- * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
+- */
+- orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
+-
+ /* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIe
+ *
+ * Open a special address decode windows for the PCIe WA.
+@@ -294,21 +283,32 @@
+ */
+ orion5x_gpio_set_valid_pins(0x07f6);
+
+- /* register dns323 specific power-off method */
+- if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+- gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
+- pr_err("DNS323: failed to setup power-off GPIO\n");
++ /*
++ * Configure peripherals.
++ */
++ orion5x_ehci0_init();
++ orion5x_eth_init(&dns323_eth_data);
++ orion5x_i2c_init();
++ orion5x_uart0_init();
+
+- pm_power_off = dns323_power_off;
++ /* setup flash mapping
++ * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
++ */
++ orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
++ platform_device_register(&dns323_nor_flash);
++
++ platform_device_register(&dns323_gpio_leds);
+
+- /* register flash and other platform devices */
+- platform_add_devices(dns323_plat_devices,
+- ARRAY_SIZE(dns323_plat_devices));
++ platform_device_register(&dns323_button_device);
+
+ i2c_register_board_info(0, dns323_i2c_devices,
+ ARRAY_SIZE(dns323_i2c_devices));
+
+- orion5x_eth_init(&dns323_eth_data);
++ /* register dns323 specific power-off method */
++ if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
++ gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
++ pr_err("DNS323: failed to setup power-off GPIO\n");
++ pm_power_off = dns323_power_off;
+ }
+
+ /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
+--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
++++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
+@@ -188,13 +188,6 @@
+ orion5x_init();
+
+ /*
+- * Setup the CPU address decode windows for our devices
+- */
+- orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
+- KUROBOX_PRO_NOR_BOOT_SIZE);
+- orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE);
+-
+- /*
+ * Open a special address decode windows for the PCIe WA.
+ */
+ orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+@@ -221,12 +214,27 @@
+
+ orion5x_gpio_set_valid_pins(0x0000000c);
+
++ /*
++ * Configure peripherals.
++ */
++ orion5x_ehci0_init();
++ orion5x_ehci1_init();
++ orion5x_eth_init(&kurobox_pro_eth_data);
++ orion5x_i2c_init();
++ orion5x_sata_init(&kurobox_pro_sata_data);
++ orion5x_uart0_init();
++
++ orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
++ KUROBOX_PRO_NOR_BOOT_SIZE);
+ platform_device_register(&kurobox_pro_nor_flash);
+- if (machine_is_kurobox_pro())
++
++ if (machine_is_kurobox_pro()) {
++ orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE,
++ KUROBOX_PRO_NAND_SIZE);
+ platform_device_register(&kurobox_pro_nand_flash);
++ }
++
+ i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
+- orion5x_eth_init(&kurobox_pro_eth_data);
+- orion5x_sata_init(&kurobox_pro_sata_data);
+ }
+
+ #ifdef CONFIG_MACH_KUROBOX_PRO
+--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
++++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
+@@ -241,11 +241,6 @@
+ /*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+-
+-static struct platform_device *rd88f5182_devices[] __initdata = {
+- &rd88f5182_nor_flash,
+-};
+-
+ static void __init rd88f5182_init(void)
+ {
+ /*
+@@ -254,13 +249,6 @@
+ orion5x_init();
+
+ /*
+- * Setup the CPU address decode windows for our devices
+- */
+- orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
+- RD88F5182_NOR_BOOT_SIZE);
+- orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
+-
+- /*
+ * Open a special address decode windows for the PCIe WA.
+ */
+ orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+@@ -296,10 +284,23 @@
+
+ orion5x_gpio_set_valid_pins(0x000000fb);
+
+- platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices));
+- i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
++ /*
++ * Configure peripherals.
++ */
++ orion5x_ehci0_init();
++ orion5x_ehci1_init();
+ orion5x_eth_init(&rd88f5182_eth_data);
++ orion5x_i2c_init();
+ orion5x_sata_init(&rd88f5182_sata_data);
++ orion5x_uart0_init();
++
++ orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
++ RD88F5182_NOR_BOOT_SIZE);
++
++ orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
++ platform_device_register(&rd88f5182_nor_flash);
++
++ i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
+ }
+
+ MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
+--- a/arch/arm/mach-orion5x/ts209-setup.c
++++ b/arch/arm/mach-orion5x/ts209-setup.c
+@@ -332,16 +332,9 @@
+
+ * General Setup
+ ****************************************************************************/
+-
+-static struct platform_device *qnap_ts209_devices[] __initdata = {
+- &qnap_ts209_nor_flash,
+- &qnap_ts209_button_device,
+-};
+-
+ /*
+ * QNAP TS-[12]09 specific power off method via UART1-attached PIC
+ */
+-
+ #define UART1_REG(x) (UART1_VIRT_BASE + ((UART_##x) << 2))
+
+ static void qnap_ts209_power_off(void)
+@@ -372,12 +365,6 @@
+ orion5x_init();
+
+ /*
+- * Setup flash mapping
+- */
+- orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
+- QNAP_TS209_NOR_BOOT_SIZE);
+-
+- /*
+ * Open a special address decode windows for the PCIe WA.
+ */
+ orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+@@ -411,11 +398,22 @@
+ orion5x_write(MPP_16_19_CTRL, 0x5500);
+ orion5x_gpio_set_valid_pins(0x3cc0fff);
+
+- /* register ts209 specific power-off method */
+- pm_power_off = qnap_ts209_power_off;
++ /*
++ * Configure peripherals.
++ */
++ orion5x_ehci0_init();
++ orion5x_ehci1_init();
++ ts209_find_mac_addr();
++ orion5x_eth_init(&qnap_ts209_eth_data);
++ orion5x_i2c_init();
++ orion5x_sata_init(&qnap_ts209_sata_data);
++ orion5x_uart0_init();
++
++ orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
++ QNAP_TS209_NOR_BOOT_SIZE);
++ platform_device_register(&qnap_ts209_nor_flash);
+
+- platform_add_devices(qnap_ts209_devices,
+- ARRAY_SIZE(qnap_ts209_devices));
++ platform_device_register(&qnap_ts209_button_device);
+
+ /* Get RTC IRQ and register the chip */
+ if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
+@@ -428,10 +426,8 @@
+ pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
+ i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
+
+- ts209_find_mac_addr();
+- orion5x_eth_init(&qnap_ts209_eth_data);
+-
+- orion5x_sata_init(&qnap_ts209_sata_data);
++ /* register ts209 specific power-off method */
++ pm_power_off = qnap_ts209_power_off;
+ }
+
+ MACHINE_START(TS209, "QNAP TS-109/TS-209")
projects / openwrt / openwrt.git / commitdiff