ar71xx: Add kernel 4.9 support
authorHauke Mehrtens <hauke@hauke-m.de>
Tue, 3 Oct 2017 16:02:59 +0000 (18:02 +0200)
committerHauke Mehrtens <hauke@hauke-m.de>
Wed, 11 Oct 2017 20:32:39 +0000 (22:32 +0200)
This add support for kernel 4.9 to the ar71xx target.
It was compile tested with the generic, NAND and mikrotik subtarget.
Multiple members of the community tested it on their boards and did not
report any major problem so far.

Especially the NAND part received some changes to adapt to the new
kernel APIs. The serial driver hack used for the Arduino Yun was not
ported because the kernel changed there a lot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
106 files changed:
target/linux/ar71xx/config-4.9 [new file with mode: 0644]
target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c
target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c
target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c
target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c
target/linux/ar71xx/files/arch/mips/ath79/mach-rbsxtlite.c
target/linux/ar71xx/files/drivers/gpio/gpio-nxp-74hc153.c
target/linux/ar71xx/files/drivers/mtd/cybertan_part.c
target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c
target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c
target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c
target/linux/ar71xx/files/drivers/mtd/nand/rb91x_nand.c
target/linux/ar71xx/files/drivers/mtd/tplinkpart.c
target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c
target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c
target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
target/linux/ar71xx/files/drivers/spi/spi-rb4xx-cpld.c
target/linux/ar71xx/mikrotik/config-default
target/linux/ar71xx/nand/config-default
target/linux/ar71xx/patches-4.9/001-spi-cs-gpio.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/002-add_back_gpio_function_select.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/004-register_gpio_driver_earlier.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/100-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/103-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/104-spi-spi-ath79-support-multiple-internal-chip-select-.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/105-spi-spi-ath79-use-gpio_set_value_cansleep-for-GPIO-c.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/200-MIPS-ath79-fix-ar933x-wmac-reset.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/201-ar913x_wmac_external_reset.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/202-MIPS-ath79-ar934x-wmac-revision.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/203-MIPS-ath79-fix-restart.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/220-add_cpu_feature_overrides.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/310-lib-add-rle-decompression.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/401-mtd-physmap-add-lock-unlock.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/402-mtd-SST39VF6401B-support.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/403-mtd_fix_cfi_cmdset_0002_status_check.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/404-mtd-cybertan-trx-parser.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/405-mtd-tp-link-partition-parser.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/408-mtd-redboot_partition_scan.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/409-mtd-rb4xx_nand_driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/410-mtd-rb750-nand-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/411-mtd-cfi_cmdset_0002-force-word-write.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/413-mtd-ar934x-nand-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/414-mtd-rb91x-nand-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/420-net-ar71xx_mac_driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/423-dsa-add-88e6063-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/430-drivers-link-spi-before-mtd.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/432-spi-rb4xx-spi-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/433-spi-rb4xx-cpld-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/435-spi-vsc7385_driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/440-leds-wndr3700-usb-led-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/441-leds-rb750-led-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/450-gpio-nxp-74hc153-gpio-chip-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/451-gpio-74x164-improve-platform-device-support.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/452-gpio-add-gpio-latch-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/461-spi-ath79-add-fast-flash-read.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/490-usb-ehci-add-quirks-for-qca-socs.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/500-MIPS-fw-myloader.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/504-MIPS-ath79-add-ath79_device_reset_get.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/505-MIPS-ath79-add-ath79_gpio_function_select.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/506-MIPS-ath79-prom-parse-redboot-args.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/507-MIPS-ath79-prom-add-myloader-support.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/508-MIPS-ath79-prom-image-command-line-hack.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/509-MIPS-ath79-process-board-kernel-option.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/520-MIPS-ath79-enable-UART-function.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/521-MIPS-ath79-enable-UART-for-early_serial.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/523-MIPS-ath79-OTP-support.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/525-MIPS-ath79-enable-qca-usb-quirks.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/601-MIPS-ath79-add-more-register-defines.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/602-MIPS-ath79-add-openwrt-stuff.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/603-MIPS-ath79-ap121-fixes.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/605-MIPS-ath79-db120-fixes.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/606-MIPS-ath79-pb44-fixes.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/607-MIPS-ath79-ubnt-xm-fixes.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/608-MIPS-ath79-ubnt-xm-add-more-boards.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/609-MIPS-ath79-ap136-fixes.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/611-MIPS-ath79-wdt-timeout.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/612-MIPS-ath79-set-buffalo-txgain.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/630-MIPS-ath79-fix-chained-irq-disable.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/631-MIPS-ath79-wmac-enable-set-led-pin.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/632-MIPS-ath79-gpio-enable-set-direction.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/640-MIPS-ath79-add-QCA955x-wmac-reset.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/700-MIPS-ath79-add-openwrt-Kconfig.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/701-MIPS-ath79-add-routerboard-detection.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/739-MIPS-ath79-add-gpio-func-register-for-QCA955x-SoC.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/740-MIPS-ath79-add-PCI-for-QCA953x-SoC.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/818-MIPS-ath79-add-nu801-led-driver.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/820-MIPS-ath79-add_gpio_function2_setup.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/900-mdio_bitbang_ignore_ta_value.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/902-at803x-add-reset-gpio-pdata.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/910-unaligned_access_hacks.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/920-usb-chipidea-AR933x-platform-support.patch [new file with mode: 0644]
target/linux/ar71xx/patches-4.9/930-chipidea-pullup.patch [new file with mode: 0644]

diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9
new file mode 100644 (file)
index 0000000..c5b8908
--- /dev/null
@@ -0,0 +1,485 @@
+CONFIG_AG71XX=y
+CONFIG_AG71XX_AR8216_SUPPORT=y
+# CONFIG_AG71XX_DEBUG is not set
+# CONFIG_AG71XX_DEBUG_FS is not set
+CONFIG_AR8216_PHY=y
+CONFIG_AR8216_PHY_LEDS=y
+CONFIG_ARCH_BINFMT_ELF_STATE=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DISCARD_MEMBLOCK=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
+CONFIG_ARCH_HAS_RESET_CONTROLLER=y
+# CONFIG_ARCH_HAS_SG_CHAIN is not set
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_AT803X_PHY=y
+CONFIG_ATH79=y
+CONFIG_ATH79_DEV_AP9X_PCI=y
+CONFIG_ATH79_DEV_DSA=y
+CONFIG_ATH79_DEV_ETH=y
+CONFIG_ATH79_DEV_GPIO_BUTTONS=y
+CONFIG_ATH79_DEV_LEDS_GPIO=y
+CONFIG_ATH79_DEV_M25P80=y
+CONFIG_ATH79_DEV_NFC=y
+CONFIG_ATH79_DEV_SPI=y
+CONFIG_ATH79_DEV_USB=y
+CONFIG_ATH79_DEV_WMAC=y
+CONFIG_ATH79_MACH_A60=y
+CONFIG_ATH79_MACH_ALFA_AP120C=y
+CONFIG_ATH79_MACH_ALFA_AP96=y
+CONFIG_ATH79_MACH_ALFA_NX=y
+CONFIG_ATH79_MACH_ALL0258N=y
+CONFIG_ATH79_MACH_ALL0315N=y
+CONFIG_ATH79_MACH_ANTMINER_S1=y
+CONFIG_ATH79_MACH_ANTMINER_S3=y
+CONFIG_ATH79_MACH_ANTROUTER_R1=y
+CONFIG_ATH79_MACH_AP121=y
+CONFIG_ATH79_MACH_AP121F=y
+CONFIG_ATH79_MACH_AP132=y
+CONFIG_ATH79_MACH_AP136=y
+CONFIG_ATH79_MACH_AP143=y
+CONFIG_ATH79_MACH_AP147=y
+CONFIG_ATH79_MACH_AP152=y
+CONFIG_ATH79_MACH_AP531B0=y
+# CONFIG_ATH79_MACH_AP81 is not set
+CONFIG_ATH79_MACH_AP90Q=y
+CONFIG_ATH79_MACH_AP96=y
+CONFIG_ATH79_MACH_ARCHER_C25_V1=y
+CONFIG_ATH79_MACH_ARCHER_C58_V1=y
+CONFIG_ATH79_MACH_ARCHER_C59_V1=y
+CONFIG_ATH79_MACH_ARCHER_C60_V1=y
+CONFIG_ATH79_MACH_ARCHER_C7=y
+CONFIG_ATH79_MACH_ARDUINO_YUN=y
+CONFIG_ATH79_MACH_AW_NR580=y
+CONFIG_ATH79_MACH_BHR_4GRV2=y
+CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
+CONFIG_ATH79_MACH_BSB=y
+CONFIG_ATH79_MACH_C55=y
+# CONFIG_ATH79_MACH_C60 is not set
+CONFIG_ATH79_MACH_CAP324=y
+CONFIG_ATH79_MACH_CAP4200AG=y
+CONFIG_ATH79_MACH_CARAMBOLA2=y
+CONFIG_ATH79_MACH_CF_E316N_V2=y
+CONFIG_ATH79_MACH_CF_E320N_V2=y
+CONFIG_ATH79_MACH_CF_E355AC=y
+CONFIG_ATH79_MACH_CF_E380AC_V1=y
+CONFIG_ATH79_MACH_CF_E380AC_V2=y
+CONFIG_ATH79_MACH_CF_E520N=y
+CONFIG_ATH79_MACH_CF_E530N=y
+CONFIG_ATH79_MACH_CPE505N=y
+CONFIG_ATH79_MACH_CPE510=y
+CONFIG_ATH79_MACH_CPE830=y
+CONFIG_ATH79_MACH_CPE870=y
+CONFIG_ATH79_MACH_CR3000=y
+CONFIG_ATH79_MACH_CR5000=y
+CONFIG_ATH79_MACH_DAP_2695_A1=y
+CONFIG_ATH79_MACH_DB120=y
+CONFIG_ATH79_MACH_DGL_5500_A1=y
+CONFIG_ATH79_MACH_DHP_1565_A1=y
+CONFIG_ATH79_MACH_DIR_505_A1=y
+CONFIG_ATH79_MACH_DIR_600_A1=y
+CONFIG_ATH79_MACH_DIR_615_C1=y
+CONFIG_ATH79_MACH_DIR_615_I1=y
+CONFIG_ATH79_MACH_DIR_825_B1=y
+CONFIG_ATH79_MACH_DIR_825_C1=y
+CONFIG_ATH79_MACH_DIR_869_A1=y
+CONFIG_ATH79_MACH_DLAN_HOTSPOT=y
+CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y
+CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y
+# CONFIG_ATH79_MACH_DOMYWIFI_DW33D is not set
+CONFIG_ATH79_MACH_DR344=y
+CONFIG_ATH79_MACH_DR531=y
+CONFIG_ATH79_MACH_DRAGINO2=y
+CONFIG_ATH79_MACH_E2100L=y
+CONFIG_ATH79_MACH_EAP120=y
+CONFIG_ATH79_MACH_EAP300V2=y
+CONFIG_ATH79_MACH_EAP7660D=y
+CONFIG_ATH79_MACH_EL_M150=y
+CONFIG_ATH79_MACH_EL_MINI=y
+CONFIG_ATH79_MACH_ENS202EXT=y
+CONFIG_ATH79_MACH_EPG5000=y
+CONFIG_ATH79_MACH_ESR1750=y
+CONFIG_ATH79_MACH_ESR900=y
+CONFIG_ATH79_MACH_EW_DORIN=y
+CONFIG_ATH79_MACH_F9K1115V2=y
+CONFIG_ATH79_MACH_FRITZ300E=y
+CONFIG_ATH79_MACH_GL_AR150=y
+CONFIG_ATH79_MACH_GL_AR300=y
+CONFIG_ATH79_MACH_GL_AR300M=y
+CONFIG_ATH79_MACH_GL_DOMINO=y
+CONFIG_ATH79_MACH_GL_INET=y
+CONFIG_ATH79_MACH_GL_MIFI=y
+CONFIG_ATH79_MACH_GL_USB150=y
+CONFIG_ATH79_MACH_GS_MINIBOX_V1=y
+CONFIG_ATH79_MACH_GS_OOLITE=y
+# CONFIG_ATH79_MACH_HIVEAP_121 is not set
+CONFIG_ATH79_MACH_HIWIFI_HC6361=y
+CONFIG_ATH79_MACH_HORNET_UB=y
+CONFIG_ATH79_MACH_JA76PF=y
+CONFIG_ATH79_MACH_JWAP003=y
+CONFIG_ATH79_MACH_JWAP230=y
+CONFIG_ATH79_MACH_LIMA=y
+CONFIG_ATH79_MACH_MC_MAC1200R=y
+CONFIG_ATH79_MACH_MR12=y
+CONFIG_ATH79_MACH_MR16=y
+CONFIG_ATH79_MACH_MR1750=y
+# CONFIG_ATH79_MACH_MR18 is not set
+CONFIG_ATH79_MACH_MR600=y
+CONFIG_ATH79_MACH_MR900=y
+CONFIG_ATH79_MACH_MYNET_N600=y
+CONFIG_ATH79_MACH_MYNET_N750=y
+CONFIG_ATH79_MACH_MYNET_REXT=y
+CONFIG_ATH79_MACH_MZK_W04NU=y
+CONFIG_ATH79_MACH_MZK_W300NH=y
+CONFIG_ATH79_MACH_NBG460N=y
+CONFIG_ATH79_MACH_NBG6716=y
+CONFIG_ATH79_MACH_OM2P=y
+CONFIG_ATH79_MACH_OM5P=y
+CONFIG_ATH79_MACH_OM5P_AC=y
+CONFIG_ATH79_MACH_OM5P_ACv2=y
+CONFIG_ATH79_MACH_OMY_G1=y
+CONFIG_ATH79_MACH_OMY_X1=y
+CONFIG_ATH79_MACH_ONION_OMEGA=y
+CONFIG_ATH79_MACH_PB42=y
+CONFIG_ATH79_MACH_PB44=y
+CONFIG_ATH79_MACH_PQI_AIR_PEN=y
+CONFIG_ATH79_MACH_QIHOO_C301=y
+CONFIG_ATH79_MACH_R602N=y
+# CONFIG_ATH79_MACH_R6100 is not set
+# CONFIG_ATH79_MACH_RAMBUTAN is not set
+# CONFIG_ATH79_MACH_RB2011 is not set
+# CONFIG_ATH79_MACH_RB4XX is not set
+# CONFIG_ATH79_MACH_RB750 is not set
+# CONFIG_ATH79_MACH_RB91X is not set
+# CONFIG_ATH79_MACH_RB922 is not set
+# CONFIG_ATH79_MACH_RB95X is not set
+# CONFIG_ATH79_MACH_RBSPI is not set
+# CONFIG_ATH79_MACH_RBSXTLITE is not set
+CONFIG_ATH79_MACH_RE450=y
+CONFIG_ATH79_MACH_RW2458N=y
+CONFIG_ATH79_MACH_SC1750=y
+CONFIG_ATH79_MACH_SC300M=y
+CONFIG_ATH79_MACH_SC450=y
+CONFIG_ATH79_MACH_SMART_300=y
+CONFIG_ATH79_MACH_SOM9331=y
+CONFIG_ATH79_MACH_SR3200=y
+CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE=y
+CONFIG_ATH79_MACH_TEW_632BRP=y
+CONFIG_ATH79_MACH_TEW_673GRU=y
+CONFIG_ATH79_MACH_TEW_712BR=y
+CONFIG_ATH79_MACH_TEW_732BR=y
+CONFIG_ATH79_MACH_TEW_823DRU=y
+CONFIG_ATH79_MACH_TL_MR11U=y
+CONFIG_ATH79_MACH_TL_MR13U=y
+CONFIG_ATH79_MACH_TL_MR3020=y
+CONFIG_ATH79_MACH_TL_MR3X20=y
+CONFIG_ATH79_MACH_TL_MR6400=y
+CONFIG_ATH79_MACH_TL_WA701ND_V2=y
+CONFIG_ATH79_MACH_TL_WA7210N_V2=y
+CONFIG_ATH79_MACH_TL_WA801ND_V3=y
+CONFIG_ATH79_MACH_TL_WA830RE_V2=y
+CONFIG_ATH79_MACH_TL_WA850RE_V2=y
+CONFIG_ATH79_MACH_TL_WA855RE_V1=y
+CONFIG_ATH79_MACH_TL_WA901ND=y
+CONFIG_ATH79_MACH_TL_WA901ND_V2=y
+CONFIG_ATH79_MACH_TL_WA901ND_V4=y
+CONFIG_ATH79_MACH_TL_WAX50RE=y
+CONFIG_ATH79_MACH_TL_WDR3320_V2=y
+CONFIG_ATH79_MACH_TL_WDR3500=y
+CONFIG_ATH79_MACH_TL_WDR4300=y
+CONFIG_ATH79_MACH_TL_WDR6500_V2=y
+CONFIG_ATH79_MACH_TL_WPA8630=y
+CONFIG_ATH79_MACH_TL_WR1041N_V2=y
+CONFIG_ATH79_MACH_TL_WR1043ND=y
+CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
+CONFIG_ATH79_MACH_TL_WR1043ND_V4=y
+CONFIG_ATH79_MACH_TL_WR2543N=y
+CONFIG_ATH79_MACH_TL_WR703N=y
+CONFIG_ATH79_MACH_TL_WR720N_V3=y
+CONFIG_ATH79_MACH_TL_WR741ND=y
+CONFIG_ATH79_MACH_TL_WR741ND_V4=y
+CONFIG_ATH79_MACH_TL_WR802N_V1=y
+CONFIG_ATH79_MACH_TL_WR802N_V2=y
+CONFIG_ATH79_MACH_TL_WR810N=y
+CONFIG_ATH79_MACH_TL_WR840N_V2=y
+CONFIG_ATH79_MACH_TL_WR841N_V1=y
+CONFIG_ATH79_MACH_TL_WR841N_V8=y
+CONFIG_ATH79_MACH_TL_WR841N_V9=y
+CONFIG_ATH79_MACH_TL_WR902AC_V1=y
+CONFIG_ATH79_MACH_TL_WR940N_V4=y
+CONFIG_ATH79_MACH_TL_WR941ND=y
+CONFIG_ATH79_MACH_TL_WR941ND_V6=y
+CONFIG_ATH79_MACH_TL_WR942N_V1=y
+CONFIG_ATH79_MACH_TUBE2H=y
+CONFIG_ATH79_MACH_UBNT=y
+CONFIG_ATH79_MACH_UBNT_UNIFIAC=y
+CONFIG_ATH79_MACH_UBNT_XM=y
+CONFIG_ATH79_MACH_WEIO=y
+CONFIG_ATH79_MACH_WHR_HP_G300N=y
+CONFIG_ATH79_MACH_WLAE_AG300N=y
+CONFIG_ATH79_MACH_WLR8100=y
+CONFIG_ATH79_MACH_WNDAP360=y
+CONFIG_ATH79_MACH_WNDR3700=y
+# CONFIG_ATH79_MACH_WNDR4300 is not set
+CONFIG_ATH79_MACH_WNR2000=y
+CONFIG_ATH79_MACH_WNR2000_V3=y
+CONFIG_ATH79_MACH_WNR2000_V4=y
+CONFIG_ATH79_MACH_WNR2200=y
+CONFIG_ATH79_MACH_WP543=y
+CONFIG_ATH79_MACH_WPE72=y
+CONFIG_ATH79_MACH_WPJ342=y
+CONFIG_ATH79_MACH_WPJ344=y
+CONFIG_ATH79_MACH_WPJ531=y
+CONFIG_ATH79_MACH_WPJ558=y
+CONFIG_ATH79_MACH_WPJ563=y
+CONFIG_ATH79_MACH_WRT160NL=y
+CONFIG_ATH79_MACH_WRT400N=y
+CONFIG_ATH79_MACH_WRTNODE2Q=y
+CONFIG_ATH79_MACH_WZR_450HP2=y
+CONFIG_ATH79_MACH_WZR_HP_AG300H=y
+CONFIG_ATH79_MACH_WZR_HP_G300NH=y
+CONFIG_ATH79_MACH_WZR_HP_G300NH2=y
+CONFIG_ATH79_MACH_WZR_HP_G450H=y
+CONFIG_ATH79_MACH_XD3200=y
+# CONFIG_ATH79_MACH_Z1 is not set
+CONFIG_ATH79_MACH_ZBT_WE1526=y
+CONFIG_ATH79_MACH_ZCN_1523H=y
+CONFIG_ATH79_NVRAM=y
+CONFIG_ATH79_PCI_ATH9K_FIXUP=y
+# CONFIG_ATH79_ROUTERBOOT is not set
+CONFIG_ATH79_WDT=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_CEVT_R4K=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
+CONFIG_CMDLINE_BOOL=y
+# CONFIG_CMDLINE_OVERRIDE is not set
+CONFIG_COMMON_CLK=y
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_GENERIC_DUMP_TLB=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_RIXI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
+CONFIG_CPU_R4K_CACHE_TLB=y
+CONFIG_CPU_R4K_FPU=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ETHERNET_PACKET_MANGLE=y
+CONFIG_FIXED_PHY=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_74X164=y
+CONFIG_GPIO_ATH79=y
+CONFIG_GPIO_GENERIC=y
+# CONFIG_GPIO_LATCH is not set
+CONFIG_GPIO_NXP_74HC153=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CBPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KVM=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_GPIO=y
+CONFIG_IMAGE_CMDLINE_HACK=y
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_SOURCE="../../root"
+CONFIG_INTEL_XWAY_PHY=y
+CONFIG_IP17XX_PHY=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MIPS_CPU=y
+CONFIG_IRQ_WORK=y
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_WNDR3700_USB is not set
+CONFIG_LIBFDT=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MDIO_GPIO=y
+CONFIG_MICREL_PHY=y
+CONFIG_MIPS=y
+CONFIG_MIPS_ASID_BITS=8
+CONFIG_MIPS_ASID_SHIFT=0
+CONFIG_MIPS_CLOCK_VSYSCALL=y
+# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
+# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
+CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_MIPS_CMDLINE_FROM_DTB is not set
+# CONFIG_MIPS_ELF_APPENDED_DTB is not set
+# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+CONFIG_MIPS_MACHINE=y
+CONFIG_MIPS_NO_APPENDED_DTB=y
+# CONFIG_MIPS_RAW_APPENDED_DTB is not set
+CONFIG_MIPS_SPRAM=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CYBERTAN_PARTS=y
+CONFIG_MTD_M25P80=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_MYLOADER_PARTS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_EVA_FW=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_LZMA_FW=y
+CONFIG_MTD_SPLIT_MINOR_FW=y
+CONFIG_MTD_SPLIT_SEAMA_FW=y
+CONFIG_MTD_SPLIT_TPLINK_FW=y
+CONFIG_MTD_SPLIT_UIMAGE_FW=y
+CONFIG_MTD_SPLIT_WRGG_FW=y
+CONFIG_MTD_TPLINK_PARTS=y
+CONFIG_MYLOADER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MV88E6060=y
+CONFIG_NET_DSA_MV88E6063=y
+CONFIG_NET_DSA_TAG_TRAILER=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
+# CONFIG_NO_IOPORT_MAP is not set
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_PCI=y
+CONFIG_PCI_AR724X=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DRIVERS_LEGACY=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_RATIONAL=y
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_RTL8306_PHY=y
+CONFIG_RTL8366RB_PHY=y
+CONFIG_RTL8366S_PHY=y
+CONFIG_RTL8366_SMI=y
+CONFIG_RTL8367_PHY=y
+# CONFIG_SCHED_INFO is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250_FSL is not set
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_AR933X=y
+CONFIG_SERIAL_AR933X_CONSOLE=y
+CONFIG_SERIAL_AR933X_NR_UARTS=2
+CONFIG_SOC_AR71XX=y
+CONFIG_SOC_AR724X=y
+CONFIG_SOC_AR913X=y
+CONFIG_SOC_AR933X=y
+CONFIG_SOC_AR934X=y
+CONFIG_SOC_QCA953X=y
+CONFIG_SOC_QCA955X=y
+CONFIG_SOC_QCA956X=y
+CONFIG_SPI=y
+CONFIG_SPI_ATH79=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+# CONFIG_SPI_RB4XX is not set
+# CONFIG_SPI_VSC7385 is not set
+CONFIG_SRCU=y
+CONFIG_SWCONFIG=y
+CONFIG_SWCONFIG_LEDS=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
+CONFIG_SYS_SUPPORTS_ZBOOT=y
+CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
index e78e311..7b01af5 100644 (file)
@@ -22,6 +22,7 @@
 #include <linux/platform/ar934x_nfc.h>
 #include <linux/ar8216_platform.h>
 #include <linux/ath9k_platform.h>
+#include <linux/version.h>
 
 #include <asm/mach-ath79/ar71xx_regs.h>
 
@@ -119,6 +120,7 @@ static struct mdio_board_info c60_mdio0_info[] = {
        },
 };
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
 static struct nand_ecclayout c60_nand_ecclayout = {
        .eccbytes       = 7,
        .eccpos         = { 4, 8, 9, 10, 13, 14, 15 },
@@ -126,13 +128,67 @@ static struct nand_ecclayout c60_nand_ecclayout = {
        .oobfree        = { { 0, 3 }, { 6, 2 }, { 11, 2 }, }
 };
 
+#else
+
+static int c60_ooblayout_ecc(struct mtd_info *mtd, int section,
+                            struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 4;
+               oobregion->length = 1;
+               return 0;
+       case 1:
+               oobregion->offset = 8;
+               oobregion->length = 3;
+               return 0;
+       case 2:
+               oobregion->offset = 13;
+               oobregion->length = 3;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static int c60_ooblayout_free(struct mtd_info *mtd, int section,
+                             struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 0;
+               oobregion->length = 3;
+               return 0;
+       case 1:
+               oobregion->offset = 6;
+               oobregion->length = 2;
+               return 0;
+       case 2:
+               oobregion->offset = 11;
+               oobregion->length = 2;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static const struct mtd_ooblayout_ops c60_nand_ecclayout_ops = {
+       .ecc = c60_ooblayout_ecc,
+       .free = c60_ooblayout_free,
+};
+#endif /* < 4.6 */
+
 static int c60_nand_scan_fixup(struct mtd_info *mtd)
 {
        struct nand_chip *chip = mtd->priv;
 
        chip->ecc.size = 512;
        chip->ecc.strength = 4;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
        chip->ecc.layout = &c60_nand_ecclayout;
+#else
+       mtd_set_ooblayout(mtd, &c60_nand_ecclayout_ops);
+#endif
        return 0;
 }
 
index 6e49839..9100a59 100644 (file)
@@ -23,6 +23,7 @@
 #include <linux/spi/flash.h>
 #include <linux/routerboot.h>
 #include <linux/gpio.h>
+#include <linux/version.h>
 
 #include <asm/prom.h>
 #include <asm/mach-ath79/ath79.h>
@@ -188,6 +189,7 @@ static void rb2011_nand_select_chip(int chip_no)
        ndelay(500);
 }
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
 static struct nand_ecclayout rb2011_nand_ecclayout = {
        .eccbytes       = 6,
        .eccpos         = { 8, 9, 10, 13, 14, 15 },
@@ -195,16 +197,72 @@ static struct nand_ecclayout rb2011_nand_ecclayout = {
        .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
 };
 
+#else
+
+static int rb2011_ooblayout_ecc(struct mtd_info *mtd, int section,
+                               struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 8;
+               oobregion->length = 3;
+               return 0;
+       case 1:
+               oobregion->offset = 13;
+               oobregion->length = 3;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static int rb2011_ooblayout_free(struct mtd_info *mtd, int section,
+                                struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 0;
+               oobregion->length = 4;
+               return 0;
+       case 1:
+               oobregion->offset = 4;
+               oobregion->length = 1;
+               return 0;
+       case 2:
+               oobregion->offset = 6;
+               oobregion->length = 2;
+               return 0;
+       case 3:
+               oobregion->offset = 11;
+               oobregion->length = 2;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static const struct mtd_ooblayout_ops rb2011_nand_ecclayout_ops = {
+       .ecc = rb2011_ooblayout_ecc,
+       .free = rb2011_ooblayout_free,
+};
+#endif /* < 4.6 */
+
 static int rb2011_nand_scan_fixup(struct mtd_info *mtd)
 {
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
        struct nand_chip *chip = mtd->priv;
+#endif
 
        if (mtd->writesize == 512) {
                /*
                 * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
                 * will not be able to find the kernel that we load.
                 */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
                chip->ecc.layout = &rb2011_nand_ecclayout;
+#else
+               mtd_set_ooblayout(mtd, &rb2011_nand_ecclayout_ops);
+#endif
        }
 
        return 0;
index 0c5373c..577fb0e 100644 (file)
@@ -20,6 +20,7 @@
 #include <linux/routerboot.h>
 #include <linux/gpio.h>
 #include <linux/platform_data/phy-at803x.h>
+#include <linux/version.h>
 
 #include <asm/prom.h>
 #include <asm/mach-ath79/ath79.h>
@@ -132,6 +133,7 @@ static void rb922gs_nand_select_chip(int chip_no)
        ndelay(500);
 }
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
 static struct nand_ecclayout rb922gs_nand_ecclayout = {
        .eccbytes       = 6,
        .eccpos         = { 8, 9, 10, 13, 14, 15 },
@@ -139,16 +141,72 @@ static struct nand_ecclayout rb922gs_nand_ecclayout = {
        .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
 };
 
+#else
+
+static int rb922gs_ooblayout_ecc(struct mtd_info *mtd, int section,
+                                struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 8;
+               oobregion->length = 3;
+               return 0;
+       case 1:
+               oobregion->offset = 13;
+               oobregion->length = 3;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static int rb922gs_ooblayout_free(struct mtd_info *mtd, int section,
+                                 struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 0;
+               oobregion->length = 4;
+               return 0;
+       case 1:
+               oobregion->offset = 4;
+               oobregion->length = 1;
+               return 0;
+       case 2:
+               oobregion->offset = 6;
+               oobregion->length = 2;
+               return 0;
+       case 3:
+               oobregion->offset = 11;
+               oobregion->length = 2;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static const struct mtd_ooblayout_ops rb922gs_nand_ecclayout_ops = {
+       .ecc = rb922gs_ooblayout_ecc,
+       .free = rb922gs_ooblayout_free,
+};
+#endif /* < 4.6 */
+
 static int rb922gs_nand_scan_fixup(struct mtd_info *mtd)
 {
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
        struct nand_chip *chip = mtd->priv;
+#endif
 
        if (mtd->writesize == 512) {
                /*
                 * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
                 * will not be able to find the kernel that we load.
                 */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
                chip->ecc.layout = &rb922gs_nand_ecclayout;
+#else
+               mtd_set_ooblayout(mtd, &rb922gs_nand_ecclayout_ops);
+#endif
        }
 
        return 0;
index e940d6c..9eaeaa7 100644 (file)
@@ -24,6 +24,7 @@
 #include <linux/spi/flash.h>
 #include <linux/routerboot.h>
 #include <linux/gpio.h>
+#include <linux/version.h>
 
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
@@ -146,6 +147,7 @@ static void rb95x_nand_select_chip(int chip_no)
        ndelay(500);
 }
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
 static struct nand_ecclayout rb95x_nand_ecclayout = {
        .eccbytes       = 6,
        .eccpos         = { 8, 9, 10, 13, 14, 15 },
@@ -153,6 +155,56 @@ static struct nand_ecclayout rb95x_nand_ecclayout = {
        .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
 };
 
+#else
+
+static int rb95x_ooblayout_ecc(struct mtd_info *mtd, int section,
+                              struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 8;
+               oobregion->length = 3;
+               return 0;
+       case 1:
+               oobregion->offset = 13;
+               oobregion->length = 3;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static int rb95x_ooblayout_free(struct mtd_info *mtd, int section,
+                               struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 0;
+               oobregion->length = 4;
+               return 0;
+       case 1:
+               oobregion->offset = 4;
+               oobregion->length = 1;
+               return 0;
+       case 2:
+               oobregion->offset = 6;
+               oobregion->length = 2;
+               return 0;
+       case 3:
+               oobregion->offset = 11;
+               oobregion->length = 2;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static const struct mtd_ooblayout_ops rb95x_nand_ecclayout_ops = {
+       .ecc = rb95x_ooblayout_ecc,
+       .free = rb95x_ooblayout_free,
+};
+#endif /* < 4.6 */
+
 static int rb95x_nand_scan_fixup(struct mtd_info *mtd)
 {
        struct nand_chip *chip = mtd->priv;
@@ -162,7 +214,11 @@ static int rb95x_nand_scan_fixup(struct mtd_info *mtd)
                 * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
                 * will not be able to find the kernel that we load.
                 */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
                chip->ecc.layout = &rb95x_nand_ecclayout;
+#else
+               mtd_set_ooblayout(mtd, &rb95x_nand_ecclayout_ops);
+#endif
        }
 
        chip->options = NAND_NO_SUBPAGE_WRITE;
index 62063e0..d2edfc9 100644 (file)
@@ -24,6 +24,7 @@
 #include <linux/rle.h>
 #include <linux/routerboot.h>
 #include <linux/gpio.h>
+#include <linux/version.h>
 
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/ar71xx_regs.h>
@@ -163,6 +164,7 @@ static void rbsxtlite_nand_select_chip(int chip_no)
        ndelay(500);
 }
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
 static struct nand_ecclayout rbsxtlite_nand_ecclayout = {
        .eccbytes       = 6,
        .eccpos  = { 8, 9, 10, 13, 14, 15 },
@@ -170,16 +172,72 @@ static struct nand_ecclayout rbsxtlite_nand_ecclayout = {
        .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
 };
 
+#else
+
+static int rbsxtlite_ooblayout_ecc(struct mtd_info *mtd, int section,
+                                  struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 8;
+               oobregion->length = 3;
+               return 0;
+       case 1:
+               oobregion->offset = 13;
+               oobregion->length = 3;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static int rbsxtlite_ooblayout_free(struct mtd_info *mtd, int section,
+                                   struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 0;
+               oobregion->length = 4;
+               return 0;
+       case 1:
+               oobregion->offset = 4;
+               oobregion->length = 1;
+               return 0;
+       case 2:
+               oobregion->offset = 6;
+               oobregion->length = 2;
+               return 0;
+       case 3:
+               oobregion->offset = 11;
+               oobregion->length = 2;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static const struct mtd_ooblayout_ops rbsxtlite_nand_ecclayout_ops = {
+       .ecc = rbsxtlite_ooblayout_ecc,
+       .free = rbsxtlite_ooblayout_free,
+};
+#endif /* < 4.6 */
+
 static int rbsxtlite_nand_scan_fixup(struct mtd_info *mtd)
 {
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
        struct nand_chip *chip = mtd->priv;
+#endif
 
        if (mtd->writesize == 512) {
                /*
                * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
                * will not be able to find the kernel that we load.
                */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
                chip->ecc.layout = &rbsxtlite_nand_ecclayout;
+#else
+               mtd_set_ooblayout(mtd, &rbsxtlite_nand_ecclayout_ops);
+#endif
        }
 
        return 0;
index 8c01efe..1355e3f 100644 (file)
@@ -168,7 +168,11 @@ static int nxp_74hc153_probe(struct platform_device *pdev)
        gc->base = pdata->gpio_base;
        gc->ngpio = NXP_74HC153_NUM_GPIOS;
        gc->label = dev_name(nxp->parent);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
        gc->dev = nxp->parent;
+#else
+       gc->parent = nxp->parent;
+#endif
        gc->owner = THIS_MODULE;
 
        err = gpiochip_add(&nxp->gpio_chip);
index 391411f..4d33c19 100644 (file)
@@ -28,6 +28,7 @@
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/version.h>
 
 struct cybertan_header {
        char    magic[4];
@@ -82,7 +83,11 @@ struct firmware_header {
 #define NVRAM_LEN      0x10000
 
 static int cybertan_parse_partitions(struct mtd_info *master,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
                                     struct mtd_partition **pparts,
+#else
+                                    const struct mtd_partition **pparts,
+#endif
                                     struct mtd_part_parser_data *data)
 {
        struct firmware_header *header;
index a47fc04..a135e0f 100644 (file)
@@ -18,6 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/version.h>
 
 #include <linux/platform/ar934x_nfc.h>
 
@@ -187,7 +188,9 @@ nfc_debug_data(const char *label, void *data, int len) {}
 #endif /* AR934X_NFC_DEBUG_DATA */
 
 struct ar934x_nfc {
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
        struct mtd_info mtd;
+#endif
        struct nand_chip nand_chip;
        struct device *parent;
        void __iomem *base;
@@ -259,7 +262,22 @@ ar934x_nfc_get_platform_data(struct ar934x_nfc *nfc)
 static inline struct
 ar934x_nfc *mtd_to_ar934x_nfc(struct mtd_info *mtd)
 {
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
        return container_of(mtd, struct ar934x_nfc, mtd);
+#else
+       struct nand_chip *chip = mtd_to_nand(mtd);
+
+       return container_of(chip, struct ar934x_nfc, nand_chip);
+#endif
+}
+
+static struct mtd_info *ar934x_nfc_to_mtd(struct ar934x_nfc *nfc)
+{
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
+       return &nfc->mtd;
+#else
+       return nand_to_mtd(&nfc->nand_chip);
+#endif
 }
 
 static inline bool ar934x_nfc_use_irq(struct ar934x_nfc *nfc)
@@ -648,7 +666,7 @@ ar934x_nfc_cmdfunc(struct mtd_info *mtd, unsigned int command, int column,
                   int page_addr)
 {
        struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
-       struct nand_chip *nand = mtd->priv;
+       struct nand_chip *nand = &nfc->nand_chip;
 
        nfc->read_id = false;
        if (command != NAND_CMD_PAGEPROG)
@@ -1241,6 +1259,7 @@ ar934x_nfc_init_tail(struct mtd_info *mtd)
        return err;
 }
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
 static struct nand_ecclayout ar934x_nfc_oob_64_hwecc = {
        .eccbytes = 28,
        .eccpos = {
@@ -1261,19 +1280,60 @@ static struct nand_ecclayout ar934x_nfc_oob_64_hwecc = {
        },
 };
 
+#else
+
+static int ar934x_nfc_ooblayout_ecc(struct mtd_info *mtd, int section,
+                                   struct mtd_oob_region *oobregion)
+{
+       if (section)
+               return -ERANGE;
+
+       oobregion->offset = 20;
+       oobregion->length = 28;
+
+       return 0;
+}
+
+static int ar934x_nfc_ooblayout_free(struct mtd_info *mtd, int section,
+                                    struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 4;
+               oobregion->length = 16;
+               return 0;
+       case 1:
+               oobregion->offset = 48;
+               oobregion->length = 16;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static const struct mtd_ooblayout_ops ar934x_nfc_ecclayout_ops = {
+       .ecc = ar934x_nfc_ooblayout_ecc,
+       .free = ar934x_nfc_ooblayout_free,
+};
+#endif /* < 4.6 */
+
 static int
 ar934x_nfc_setup_hwecc(struct ar934x_nfc *nfc)
 {
        struct nand_chip *nand = &nfc->nand_chip;
+       struct mtd_info *mtd = ar934x_nfc_to_mtd(nfc);
        u32 ecc_cap;
        u32 ecc_thres;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0)
+       struct mtd_oob_region oobregion;
+#endif
 
-       if (!config_enabled(CONFIG_MTD_NAND_AR934X_HW_ECC)) {
+       if (!IS_ENABLED(CONFIG_MTD_NAND_AR934X_HW_ECC)) {
                dev_err(nfc->parent, "hardware ECC support is disabled\n");
                return -EINVAL;
        }
 
-       switch (nfc->mtd.writesize) {
+       switch (mtd->writesize) {
        case 2048:
                /*
                 * Writing a subpage separately is not supported, because
@@ -1284,17 +1344,25 @@ ar934x_nfc_setup_hwecc(struct ar934x_nfc *nfc)
                nand->ecc.size = 512;
                nand->ecc.bytes = 7;
                nand->ecc.strength = 4;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
                nand->ecc.layout = &ar934x_nfc_oob_64_hwecc;
+#else
+               mtd_set_ooblayout(mtd, &ar934x_nfc_ecclayout_ops);
+#endif
                break;
 
        default:
                dev_err(nfc->parent,
                        "hardware ECC is not available for %d byte pages\n",
-                       nfc->mtd.writesize);
+                       mtd->writesize);
                return -EINVAL;
        }
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
        BUG_ON(!nand->ecc.layout);
+#else
+       BUG_ON(!mtd->ooblayout->ecc);
+#endif
 
        switch (nand->ecc.strength) {
        case 4:
@@ -1309,12 +1377,17 @@ ar934x_nfc_setup_hwecc(struct ar934x_nfc *nfc)
        }
 
        nfc->ecc_thres = ecc_thres;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
        nfc->ecc_oob_pos = nand->ecc.layout->eccpos[0];
+#else
+       mtd->ooblayout->ecc(mtd, 0, &oobregion);
+       nfc->ecc_oob_pos = oobregion.offset;
+#endif
 
        nfc->ecc_ctrl_reg = ecc_cap << AR934X_NFC_ECC_CTRL_ECC_CAP_S;
        nfc->ecc_ctrl_reg |= ecc_thres << AR934X_NFC_ECC_CTRL_ERR_THRES_S;
 
-       nfc->ecc_offset_reg = nfc->mtd.writesize + nfc->ecc_oob_pos;
+       nfc->ecc_offset_reg = mtd->writesize + nfc->ecc_oob_pos;
 
        nand->ecc.mode = NAND_ECC_HW;
        nand->ecc.read_page = ar934x_nfc_read_page;
@@ -1382,9 +1455,11 @@ ar934x_nfc_probe(struct platform_device *pdev)
        nfc->swap_dma = pdata->swap_dma;
 
        nand = &nfc->nand_chip;
-       mtd = &nfc->mtd;
+       mtd = ar934x_nfc_to_mtd(nfc);
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
        mtd->priv = nand;
+#endif
        mtd->owner = THIS_MODULE;
        if (pdata->name)
                mtd->name = pdata->name;
@@ -1429,10 +1504,18 @@ ar934x_nfc_probe(struct platform_device *pdev)
        switch (pdata->ecc_mode) {
        case AR934X_NFC_ECC_SOFT:
                nand->ecc.mode = NAND_ECC_SOFT;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0)
+               nand->ecc.algo = NAND_ECC_HAMMING;
+#endif
                break;
 
        case AR934X_NFC_ECC_SOFT_BCH:
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
                nand->ecc.mode = NAND_ECC_SOFT_BCH;
+#else
+               nand->ecc.mode = NAND_ECC_SOFT;
+               nand->ecc.algo = NAND_ECC_BCH;
+#endif
                break;
 
        case AR934X_NFC_ECC_HW:
@@ -1474,10 +1557,12 @@ static int
 ar934x_nfc_remove(struct platform_device *pdev)
 {
        struct ar934x_nfc *nfc;
+       struct mtd_info *mtd;
 
        nfc = platform_get_drvdata(pdev);
        if (nfc) {
-               nand_release(&nfc->mtd);
+               mtd = ar934x_nfc_to_mtd(nfc);
+               nand_release(mtd);
                ar934x_nfc_free_buf(nfc);
                free_irq(nfc->irq, nfc);
        }
index 96ec5dd..b397575 100644 (file)
@@ -23,6 +23,7 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/version.h>
 
 #include <asm/mach-ath79/ath79.h>
 #include <asm/mach-ath79/rb4xx_cpld.h>
@@ -41,6 +42,7 @@ struct rb4xx_nand_info {
        struct mtd_info         mtd;
 };
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
 /*
  * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
  * will not be able to find the kernel that we load.
@@ -52,6 +54,56 @@ static struct nand_ecclayout rb4xx_nand_ecclayout = {
        .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
 };
 
+#else
+
+static int rb4xx_ooblayout_ecc(struct mtd_info *mtd, int section,
+                              struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 8;
+               oobregion->length = 3;
+               return 0;
+       case 1:
+               oobregion->offset = 13;
+               oobregion->length = 3;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static int rb4xx_ooblayout_free(struct mtd_info *mtd, int section,
+                               struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 0;
+               oobregion->length = 4;
+               return 0;
+       case 1:
+               oobregion->offset = 4;
+               oobregion->length = 1;
+               return 0;
+       case 2:
+               oobregion->offset = 6;
+               oobregion->length = 2;
+               return 0;
+       case 3:
+               oobregion->offset = 11;
+               oobregion->length = 2;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static const struct mtd_ooblayout_ops rb4xx_nand_ecclayout_ops = {
+       .ecc = rb4xx_ooblayout_ecc,
+       .free = rb4xx_ooblayout_free,
+};
+#endif /* < 4.6 */
+
 static struct mtd_partition rb4xx_nand_partitions[] = {
        {
                .name   = "booter",
@@ -229,7 +281,11 @@ static int rb4xx_nand_probe(struct platform_device *pdev)
        }
 
        if (info->mtd.writesize == 512)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
                info->chip.ecc.layout = &rb4xx_nand_ecclayout;
+#else
+               mtd_set_ooblayout(&info->mtd, &rb4xx_nand_ecclayout_ops);
+#endif
 
        ret = nand_scan_tail(&info->mtd);
        if (ret) {
index 0604c5a..f8a6722 100644 (file)
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/version.h>
 
 #include <asm/mach-ath79/ar71xx_regs.h>
 #include <asm/mach-ath79/ath79.h>
@@ -49,6 +50,7 @@ static inline struct rb750_nand_info *mtd_to_rbinfo(struct mtd_info *mtd)
        return container_of(mtd, struct rb750_nand_info, mtd);
 }
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
 /*
  * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
  * will not be able to find the kernel that we load.
@@ -60,6 +62,56 @@ static struct nand_ecclayout rb750_nand_ecclayout = {
        .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
 };
 
+#else
+
+static int rb750_ooblayout_ecc(struct mtd_info *mtd, int section,
+                              struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 8;
+               oobregion->length = 3;
+               return 0;
+       case 1:
+               oobregion->offset = 13;
+               oobregion->length = 3;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static int rb750_ooblayout_free(struct mtd_info *mtd, int section,
+                               struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 0;
+               oobregion->length = 4;
+               return 0;
+       case 1:
+               oobregion->offset = 4;
+               oobregion->length = 1;
+               return 0;
+       case 2:
+               oobregion->offset = 6;
+               oobregion->length = 2;
+               return 0;
+       case 3:
+               oobregion->offset = 11;
+               oobregion->length = 2;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static const struct mtd_ooblayout_ops rb750_nand_ecclayout_ops = {
+       .ecc = rb750_ooblayout_ecc,
+       .free = rb750_ooblayout_free,
+};
+#endif /* < 4.6 */
+
 static struct mtd_partition rb750_nand_partitions[] = {
        {
                .name   = "booter",
@@ -292,7 +344,11 @@ static int rb750_nand_probe(struct platform_device *pdev)
        }
 
        if (info->mtd.writesize == 512)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
                info->chip.ecc.layout = &rb750_nand_ecclayout;
+#else
+               mtd_set_ooblayout(&info->mtd, &rb750_nand_ecclayout_ops);
+#endif
 
        ret = nand_scan_tail(&info->mtd);
        if (ret) {
index 1308e18..15b1816 100644 (file)
@@ -19,6 +19,7 @@
 #include <linux/slab.h>
 #include <linux/gpio.h>
 #include <linux/platform_data/rb91x_nand.h>
+#include <linux/version.h>
 
 #include <asm/mach-ath79/ar71xx_regs.h>
 #include <asm/mach-ath79/ath79.h>
@@ -56,6 +57,7 @@ static inline struct rb91x_nand_info *mtd_to_rbinfo(struct mtd_info *mtd)
        return container_of(mtd, struct rb91x_nand_info, mtd);
 }
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
 /*
  * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
  * will not be able to find the kernel that we load.
@@ -67,6 +69,56 @@ static struct nand_ecclayout rb91x_nand_ecclayout = {
        .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
 };
 
+#else
+
+static int rb91x_ooblayout_ecc(struct mtd_info *mtd, int section,
+                              struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 8;
+               oobregion->length = 3;
+               return 0;
+       case 1:
+               oobregion->offset = 13;
+               oobregion->length = 3;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static int rb91x_ooblayout_free(struct mtd_info *mtd, int section,
+                               struct mtd_oob_region *oobregion)
+{
+       switch (section) {
+       case 0:
+               oobregion->offset = 0;
+               oobregion->length = 4;
+               return 0;
+       case 1:
+               oobregion->offset = 4;
+               oobregion->length = 1;
+               return 0;
+       case 2:
+               oobregion->offset = 6;
+               oobregion->length = 2;
+               return 0;
+       case 3:
+               oobregion->offset = 11;
+               oobregion->length = 2;
+               return 0;
+       default:
+               return -ERANGE;
+       }
+}
+
+static const struct mtd_ooblayout_ops rb91x_nand_ecclayout_ops = {
+       .ecc = rb91x_ooblayout_ecc,
+       .free = rb91x_ooblayout_free,
+};
+#endif /* < 4.6 */
+
 static struct mtd_partition rb91x_nand_partitions[] = {
        {
                .name   = "booter",
@@ -334,7 +386,11 @@ static int rb91x_nand_probe(struct platform_device *pdev)
                return ret;
 
        if (rbni->mtd.writesize == 512)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
                rbni->chip.ecc.layout = &rb91x_nand_ecclayout;
+#else
+               mtd_set_ooblayout(&rbni->mtd, &rb91x_nand_ecclayout_ops);
+#endif
 
        ret = nand_scan_tail(&rbni->mtd);
        if (ret)
index ac1efa1..1b94163 100644 (file)
@@ -15,6 +15,7 @@
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/version.h>
 
 #define TPLINK_NUM_PARTS       5
 #define TPLINK_HEADER_V1       0x01000000
@@ -109,7 +110,11 @@ static int tplink_check_rootfs_magic(struct mtd_info *mtd, size_t offset)
 }
 
 static int tplink_parse_partitions_offset(struct mtd_info *master,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
                                   struct mtd_partition **pparts,
+#else
+                                  const struct mtd_partition **pparts,
+#endif
                                   struct mtd_part_parser_data *data,
                                   size_t offset)
 {
@@ -181,7 +186,11 @@ err:
 }
 
 static int tplink_parse_partitions(struct mtd_info *master,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
                                   struct mtd_partition **pparts,
+#else
+                                  const struct mtd_partition **pparts,
+#endif
                                   struct mtd_part_parser_data *data)
 {
        return tplink_parse_partitions_offset(master, pparts, data,
@@ -189,7 +198,11 @@ static int tplink_parse_partitions(struct mtd_info *master,
 }
 
 static int tplink_parse_64k_partitions(struct mtd_info *master,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
                                   struct mtd_partition **pparts,
+#else
+                                  const struct mtd_partition **pparts,
+#endif
                                   struct mtd_part_parser_data *data)
 {
        return tplink_parse_partitions_offset(master, pparts, data,
index b9e9af3..5b6da71 100644 (file)
@@ -17,6 +17,7 @@
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 #include <net/dsa.h>
+#include <linux/version.h>
 
 #define REG_BASE               0x10
 #define REG_PHY(p)             (REG_BASE + (p))
 
 static int reg_read(struct dsa_switch *ds, int addr, int reg)
 {
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,15,0)
-       return mdiobus_read(ds->master_mii_bus, addr, reg);
-#else
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
        struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
        return mdiobus_read(bus, addr, reg);
+#else
+       struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->dev);
+       return mdiobus_read(bus, addr, reg);
 #endif
 }
 
@@ -47,14 +49,22 @@ static int reg_read(struct dsa_switch *ds, int addr, int reg)
 
 static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
 {
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,15,0)
-       return mdiobus_write(ds->master_mii_bus, addr, reg, val);
-#else
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
        struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
        return mdiobus_write(bus, addr, reg, val);
+#else
+       struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->dev);
+       return mdiobus_write(bus, addr, reg, val);
 #endif
 }
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,8,0)
+static enum dsa_tag_protocol mv88e6063_get_tag_protocol(struct dsa_switch *ds)
+{
+       return DSA_TAG_PROTO_TRAILER;
+}
+#endif
+
 #define REG_WRITE(addr, reg, val)                              \
        ({                                                      \
                int __ret;                                      \
@@ -64,16 +74,20 @@ static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
                        return __ret;                           \
        })
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,15,0)
-static char *mv88e6063_probe(struct mii_bus *bus, int sw_addr)
-{
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
+static char *mv88e6063_drv_probe(struct device *host_dev, int sw_addr)
 #else
-static char *mv88e6063_probe(struct device *host_dev, int sw_addr)
+static const char *mv88e6063_drv_probe(struct device *dsa_dev,
+                                      struct device *host_dev, int sw_addr,
+                                      void **_priv)
+#endif
 {
        struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
-#endif
        int ret;
 
+       if (!bus)
+               return NULL;
+
        ret = mdiobus_read(bus, REG_PORT(0), 0x03);
        if (ret >= 0) {
                ret &= 0xfff0;
@@ -163,7 +177,11 @@ static int mv88e6063_setup_port(struct dsa_switch *ds, int p)
        REG_WRITE(addr, 0x06,
                        ((p & 0xf) << 12) |
                         (dsa_is_cpu_port(ds, p) ?
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
                                ds->phys_port_mask :
+#else
+                               ds->enabled_port_mask :
+#endif
                                (1 << ds->dst->cpu_port)));
 
        /*
@@ -240,72 +258,32 @@ mv88e6063_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
        return reg_write(ds, addr, regnum, val);
 }
 
-static void mv88e6063_poll_link(struct dsa_switch *ds)
-{
-       int i;
-
-       for (i = 0; i < DSA_MAX_PORTS; i++) {
-               struct net_device *dev;
-               int uninitialized_var(port_status);
-               int link;
-               int speed;
-               int duplex;
-               int fc;
-
-               dev = ds->ports[i];
-               if (dev == NULL)
-                       continue;
-
-               link = 0;
-               if (dev->flags & IFF_UP) {
-                       port_status = reg_read(ds, REG_PORT(i), 0x00);
-                       if (port_status < 0)
-                               continue;
-
-                       link = !!(port_status & 0x1000);
-               }
-
-               if (!link) {
-                       if (netif_carrier_ok(dev)) {
-                               printk(KERN_INFO "%s: link down\n", dev->name);
-                               netif_carrier_off(dev);
-                       }
-                       continue;
-               }
-
-               speed = (port_status & 0x0100) ? 100 : 10;
-               duplex = (port_status & 0x0200) ? 1 : 0;
-               fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;
-
-               if (!netif_carrier_ok(dev)) {
-                       printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
-                                        "flow control %sabled\n", dev->name,
-                                        speed, duplex ? "full" : "half",
-                                        fc ? "en" : "dis");
-                       netif_carrier_on(dev);
-               }
-       }
-}
-
-static struct dsa_switch_driver mv88e6063_switch_driver = {
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,9,0)
+static struct dsa_switch_driver mv88e6063_switch_ops = {
+#else
+static struct dsa_switch_ops mv88e6063_switch_ops = {
+#endif
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,8,0)
        .tag_protocol   = htons(ETH_P_TRAILER),
-       .probe          = mv88e6063_probe,
+#else
+       .get_tag_protocol = mv88e6063_get_tag_protocol,
+#endif
+       .probe          = mv88e6063_drv_probe,
        .setup          = mv88e6063_setup,
        .set_addr       = mv88e6063_set_addr,
        .phy_read       = mv88e6063_phy_read,
        .phy_write      = mv88e6063_phy_write,
-       .poll_link      = mv88e6063_poll_link,
 };
 
 static int __init mv88e6063_init(void)
 {
-       register_switch_driver(&mv88e6063_switch_driver);
+       register_switch_driver(&mv88e6063_switch_ops);
        return 0;
 }
 module_init(mv88e6063_init);
 
 static void __exit mv88e6063_cleanup(void)
 {
-       unregister_switch_driver(&mv88e6063_switch_driver);
+       unregister_switch_driver(&mv88e6063_switch_ops);
 }
 module_exit(mv88e6063_cleanup);
index b63a4b7..2915476 100644 (file)
@@ -254,7 +254,11 @@ static int ag71xx_mdio_probe(struct platform_device *pdev)
        am->mii_bus->read = ag71xx_mdio_read;
        am->mii_bus->write = ag71xx_mdio_write;
        am->mii_bus->reset = ag71xx_mdio_reset;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
        am->mii_bus->irq = am->mii_irq;
+#else
+       memcpy(am->mii_bus->irq, am->mii_irq, sizeof(am->mii_bus->irq));
+#endif
        am->mii_bus->priv = am;
        am->mii_bus->parent = &pdev->dev;
        snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev));
index 9de77e9..12fa2e3 100644 (file)
@@ -112,6 +112,7 @@ static int ag71xx_phy_connect_multi(struct ag71xx *ag)
                if (!(pdata->phy_mask & (1 << phy_addr)))
                        continue;
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
                if (ag->mii_bus->phy_map[phy_addr] == NULL)
                        continue;
 
@@ -122,6 +123,18 @@ static int ag71xx_phy_connect_multi(struct ag71xx *ag)
 
                if (phydev == NULL)
                        phydev = ag->mii_bus->phy_map[phy_addr];
+#else
+               if (ag->mii_bus->mdio_map[phy_addr] == NULL)
+                       continue;
+
+               DBG("%s: PHY found at %s, uid=%08x\n",
+                       dev_name(dev),
+                       dev_name(&ag->mii_bus->mdio_map[phy_addr]->dev),
+                       ag->mii_bus->mdio_map[phy_addr]->phy_id);
+
+               if (phydev == NULL)
+                       phydev = mdiobus_get_phy(ag->mii_bus, phy_addr);
+#endif
        }
 
        if (!phydev) {
@@ -130,13 +143,21 @@ static int ag71xx_phy_connect_multi(struct ag71xx *ag)
                return -ENODEV;
        }
 
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
        ag->phy_dev = phy_connect(ag->dev, dev_name(&phydev->dev),
+#else
+       ag->phy_dev = phy_connect(ag->dev, phydev_name(phydev),
+#endif
                                  &ag71xx_phy_link_adjust,
                                  pdata->phy_if_mode);
 
        if (IS_ERR(ag->phy_dev)) {
                dev_err(dev, "could not connect to PHY at %s\n",
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
                           dev_name(&phydev->dev));
+#else
+                          phydev_name(phydev));
+#endif
                return PTR_ERR(ag->phy_dev);
        }
 
@@ -149,7 +170,12 @@ static int ag71xx_phy_connect_multi(struct ag71xx *ag)
        phydev->advertising = phydev->supported;
 
        dev_info(dev, "connected to PHY at %s [uid=%08x, driver=%s]\n",
-                   dev_name(&phydev->dev), phydev->phy_id, phydev->drv->name);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
+                   dev_name(&phydev->dev),
+#else
+                   phydev_name(phydev),
+#endif
+                   phydev->phy_id, phydev->drv->name);
 
        ag->link = 0;
        ag->speed = 0;
index 0534c7c..18af83b 100644 (file)
@@ -21,6 +21,7 @@
 #include <linux/spi/spi.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/version.h>
 
 #include <asm/mach-ath79/rb4xx_cpld.h>
 
@@ -246,7 +247,11 @@ static int rb4xx_cpld_gpio_init(struct rb4xx_cpld *cpld, unsigned int base)
        cpld->chip.base = base;
        cpld->chip.ngpio = CPLD_NUM_GPIOS;
        cpld->chip.can_sleep = 1;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
        cpld->chip.dev = &cpld->spi->dev;
+#else
+       cpld->chip.parent = &cpld->spi->dev;
+#endif
        cpld->chip.owner = THIS_MODULE;
 
        err = gpiochip_add(&cpld->chip);
index 3ff5379..e333166 100644 (file)
@@ -215,7 +215,7 @@ CONFIG_ATH79_ROUTERBOOT=y
 CONFIG_CRC16=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_GPIO_LATCH=y
-# CONFIG_LANTIQ_PHY is not set
+# CONFIG_INTEL_XWAY_PHY is not set
 CONFIG_LEDS_RB750=y
 CONFIG_LZO_DECOMPRESS=y
 # CONFIG_MTD_CFI is not set
index ec9d550..fc243c5 100644 (file)
@@ -212,8 +212,8 @@ CONFIG_BCH=y
 CONFIG_CRC16=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
+# CONFIG_INTEL_XWAY_PHY is not set
 # CONFIG_IP17XX_PHY is not set
-# CONFIG_LANTIQ_PHY is not set
 CONFIG_LEDS_NU801=y
 CONFIG_LZO_COMPRESS=y
 CONFIG_LZO_DECOMPRESS=y
diff --git a/target/linux/ar71xx/patches-4.9/001-spi-cs-gpio.patch b/target/linux/ar71xx/patches-4.9/001-spi-cs-gpio.patch
new file mode 100644 (file)
index 0000000..7a0b669
--- /dev/null
@@ -0,0 +1,20 @@
+--- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
++++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
+@@ -14,6 +14,7 @@
+ struct ath79_spi_platform_data {
+       unsigned        bus_num;
+       unsigned        num_chipselect;
++      int *cs_gpios;
+ };
+ #endif /* _ATH79_SPI_PLATFORM_H */
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -231,6 +231,7 @@ static int ath79_spi_probe(struct platfo
+       if (pdata) {
+               master->bus_num = pdata->bus_num;
+               master->num_chipselect = pdata->num_chipselect;
++              master->cs_gpios = pdata->cs_gpios;
+       }
+       sp->bitbang.master = master;
diff --git a/target/linux/ar71xx/patches-4.9/002-add_back_gpio_function_select.patch b/target/linux/ar71xx/patches-4.9/002-add_back_gpio_function_select.patch
new file mode 100644 (file)
index 0000000..5b26a64
--- /dev/null
@@ -0,0 +1,92 @@
+--- /dev/null
++++ b/arch/mips/ath79/gpio.c
+@@ -0,0 +1,59 @@
++/*
++ *  Atheros AR71XX/AR724X/AR913X GPIO API support
++ *
++ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
++ *  Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
++ *
++ *  Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/io.h>
++#include <linux/gpio.h>
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++#include "common.h"
++
++void __iomem *ath79_gpio_base;
++EXPORT_SYMBOL_GPL(ath79_gpio_base);
++
++static void __iomem *ath79_gpio_get_function_reg(void)
++{
++      u32 reg = 0;
++
++      if (soc_is_ar71xx() ||
++          soc_is_ar724x() ||
++          soc_is_ar913x() ||
++          soc_is_ar933x())
++              reg = AR71XX_GPIO_REG_FUNC;
++      else if (soc_is_ar934x())
++              reg = AR934X_GPIO_REG_FUNC;
++      else
++              BUG();
++
++      return ath79_gpio_base + reg;
++}
++
++void ath79_gpio_function_setup(u32 set, u32 clear)
++{
++      void __iomem *reg = ath79_gpio_get_function_reg();
++
++      __raw_writel((__raw_readl(reg) & ~clear) | set, reg);
++      /* flush write */
++      __raw_readl(reg);
++}
++
++void ath79_gpio_function_enable(u32 mask)
++{
++      ath79_gpio_function_setup(mask, 0);
++}
++
++void ath79_gpio_function_disable(u32 mask)
++{
++      ath79_gpio_function_setup(0, mask);
++}
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -118,6 +118,7 @@ static inline int soc_is_qca955x(void)
+ void ath79_ddr_wb_flush(unsigned int reg);
+ void ath79_ddr_set_pci_windows(void);
++extern void __iomem *ath79_gpio_base;
+ extern void __iomem *ath79_pll_base;
+ extern void __iomem *ath79_reset_base;
+--- a/arch/mips/ath79/dev-common.c
++++ b/arch/mips/ath79/dev-common.c
+@@ -156,4 +156,5 @@ void __init ath79_gpio_init(void)
+       }
+       platform_device_register(&ath79_gpio_device);
++      ath79_gpio_base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+ }
+--- a/arch/mips/ath79/common.h
++++ b/arch/mips/ath79/common.h
+@@ -24,6 +24,9 @@ unsigned long ath79_get_sys_clk_rate(con
+ void ath79_ddr_ctrl_init(void);
++void ath79_gpio_function_enable(u32 mask);
++void ath79_gpio_function_disable(u32 mask);
++void ath79_gpio_function_setup(u32 set, u32 clear);
+ void ath79_gpio_init(void);
+ #endif /* __ATH79_COMMON_H */
diff --git a/target/linux/ar71xx/patches-4.9/004-register_gpio_driver_earlier.patch b/target/linux/ar71xx/patches-4.9/004-register_gpio_driver_earlier.patch
new file mode 100644 (file)
index 0000000..e6e972b
--- /dev/null
@@ -0,0 +1,15 @@
+HACK: register the GPIO driver earlier to ensure that gpio_request calls
+from mach files succeed.
+
+--- a/drivers/gpio/gpio-ath79.c
++++ b/drivers/gpio/gpio-ath79.c
+@@ -322,4 +322,8 @@ static struct platform_driver ath79_gpio
+       .remove = ath79_gpio_remove,
+ };
+-module_platform_driver(ath79_gpio_driver);
++static int __init ath79_gpio_init(void)
++{
++      return platform_driver_register(&ath79_gpio_driver);
++}
++postcore_initcall(ath79_gpio_init);
diff --git a/target/linux/ar71xx/patches-4.9/100-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch b/target/linux/ar71xx/patches-4.9/100-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch
new file mode 100644 (file)
index 0000000..8d5b089
--- /dev/null
@@ -0,0 +1,42 @@
+From 8b7a76e72fc819753878cd5684e243f33f847c79 Mon Sep 17 00:00:00 2001
+From: Markos Chandras <markos.chandras@imgtec.com>
+Date: Wed, 21 Aug 2013 11:47:22 +0100
+Subject: [PATCH] MIPS: ath79: Avoid using unitialized 'reg' variable
+
+Fixes the following build error:
+arch/mips/include/asm/mach-ath79/ath79.h:139:20: error: 'reg' may be used
+uninitialized in this function [-Werror=maybe-uninitialized]
+arch/mips/ath79/common.c:62:6: note: 'reg' was declared here
+In file included from arch/mips/ath79/common.c:20:0:
+arch/mips/ath79/common.c: In function 'ath79_device_reset_clear':
+arch/mips/include/asm/mach-ath79/ath79.h:139:20:
+error: 'reg' may be used uninitialized in this function
+[-Werror=maybe-uninitialized]
+arch/mips/ath79/common.c:90:6: note: 'reg' was declared here
+
+Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
+Acked-by: Gabor Juhos <juhosg@openwrt.org>
+---
+ arch/mips/ath79/common.c |    4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -106,7 +106,7 @@ void ath79_device_reset_set(u32 mask)
+       else if (soc_is_qca955x())
+               reg = QCA955X_RESET_REG_RESET_MODULE;
+       else
+-              BUG();
++              panic("Reset register not defined for this SOC");
+       spin_lock_irqsave(&ath79_device_reset_lock, flags);
+       t = ath79_reset_rr(reg);
+@@ -134,7 +134,7 @@ void ath79_device_reset_clear(u32 mask)
+       else if (soc_is_qca955x())
+               reg = QCA955X_RESET_REG_RESET_MODULE;
+       else
+-              BUG();
++              panic("Reset register not defined for this SOC");
+       spin_lock_irqsave(&ath79_device_reset_lock, flags);
+       t = ath79_reset_rr(reg);
diff --git a/target/linux/ar71xx/patches-4.9/103-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch b/target/linux/ar71xx/patches-4.9/103-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch
new file mode 100644 (file)
index 0000000..64fb545
--- /dev/null
@@ -0,0 +1,23 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Wed, 18 May 2016 18:03:31 +0200
+Subject: [PATCH] MIPS: ath79: fix register address in ath79_ddr_wb_flush()
+
+ath79_ddr_wb_flush_base has the type void __iomem *, so register offsets
+need to be a multiple of 4.
+
+Cc: Alban Bedel <albeu@free.fr>
+Fixes: 24b0e3e84fbf ("MIPS: ath79: Improve the DDR controller interface")
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -58,7 +58,7 @@ EXPORT_SYMBOL_GPL(ath79_ddr_ctrl_init);
+ void ath79_ddr_wb_flush(u32 reg)
+ {
+-      void __iomem *flush_reg = ath79_ddr_wb_flush_base + reg;
++      void __iomem *flush_reg = ath79_ddr_wb_flush_base + reg * 4;
+       /* Flush the DDR write buffer. */
+       __raw_writel(0x1, flush_reg);
diff --git a/target/linux/ar71xx/patches-4.9/104-spi-spi-ath79-support-multiple-internal-chip-select-.patch b/target/linux/ar71xx/patches-4.9/104-spi-spi-ath79-support-multiple-internal-chip-select-.patch
new file mode 100644 (file)
index 0000000..3c355cd
--- /dev/null
@@ -0,0 +1,70 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 9 Dec 2016 20:09:16 +0100
+Subject: [PATCH] spi: spi-ath79: support multiple internal chip select
+ lines
+
+Several devices with multiple flash chips use the internal chip select
+lines. Don't assume that chip select 1 and above are GPIO lines.
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -78,14 +78,16 @@ static void ath79_spi_chipselect(struct
+               ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+       }
+-      if (spi->chip_select) {
++      if (gpio_is_valid(spi->cs_gpio)) {
+               /* SPI is normally active-low */
+               gpio_set_value(spi->cs_gpio, cs_high);
+       } else {
++              u32 cs_bit = AR71XX_SPI_IOC_CS(spi->chip_select);
++
+               if (cs_high)
+-                      sp->ioc_base |= AR71XX_SPI_IOC_CS0;
++                      sp->ioc_base |= cs_bit;
+               else
+-                      sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
++                      sp->ioc_base &= ~cs_bit;
+               ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+       }
+@@ -118,11 +120,8 @@ static int ath79_spi_setup_cs(struct spi
+       struct ath79_spi *sp = ath79_spidev_to_sp(spi);
+       int status;
+-      if (spi->chip_select && !gpio_is_valid(spi->cs_gpio))
+-              return -EINVAL;
+-
+       status = 0;
+-      if (spi->chip_select) {
++      if (gpio_is_valid(spi->cs_gpio)) {
+               unsigned long flags;
+               flags = GPIOF_DIR_OUT;
+@@ -134,10 +133,12 @@ static int ath79_spi_setup_cs(struct spi
+               status = gpio_request_one(spi->cs_gpio, flags,
+                                         dev_name(&spi->dev));
+       } else {
++              u32 cs_bit = AR71XX_SPI_IOC_CS(spi->chip_select);
++
+               if (spi->mode & SPI_CS_HIGH)
+-                      sp->ioc_base &= ~AR71XX_SPI_IOC_CS0;
++                      sp->ioc_base &= ~cs_bit;
+               else
+-                      sp->ioc_base |= AR71XX_SPI_IOC_CS0;
++                      sp->ioc_base |= cs_bit;
+               ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
+       }
+@@ -147,7 +148,7 @@ static int ath79_spi_setup_cs(struct spi
+ static void ath79_spi_cleanup_cs(struct spi_device *spi)
+ {
+-      if (spi->chip_select) {
++      if (gpio_is_valid(spi->cs_gpio)) {
+               gpio_free(spi->cs_gpio);
+       }
+ }
diff --git a/target/linux/ar71xx/patches-4.9/105-spi-spi-ath79-use-gpio_set_value_cansleep-for-GPIO-c.patch b/target/linux/ar71xx/patches-4.9/105-spi-spi-ath79-use-gpio_set_value_cansleep-for-GPIO-c.patch
new file mode 100644 (file)
index 0000000..11b6a83
--- /dev/null
@@ -0,0 +1,19 @@
+From: Felix Fietkau <nbd@nbd.name>
+Date: Fri, 9 Dec 2016 20:11:35 +0100
+Subject: [PATCH] spi: spi-ath79: use gpio_set_value_cansleep for GPIO chip
+ select
+
+Signed-off-by: Felix Fietkau <nbd@nbd.name>
+---
+
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -80,7 +80,7 @@ static void ath79_spi_chipselect(struct
+       if (gpio_is_valid(spi->cs_gpio)) {
+               /* SPI is normally active-low */
+-              gpio_set_value(spi->cs_gpio, cs_high);
++              gpio_set_value_cansleep(spi->cs_gpio, cs_high);
+       } else {
+               u32 cs_bit = AR71XX_SPI_IOC_CS(spi->chip_select);
diff --git a/target/linux/ar71xx/patches-4.9/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch b/target/linux/ar71xx/patches-4.9/106-01-MIPS-ath79-fix-AR724X_PLL_REG_PCIE_CONFIG-offset.patch
new file mode 100644 (file)
index 0000000..e785b30
--- /dev/null
@@ -0,0 +1,29 @@
+From 0f15814bcdf59f10b708a3fba636acb089e9a4f1 Mon Sep 17 00:00:00 2001
+From: Mathias Kresin <dev@kresin.me>
+Date: Thu, 30 Mar 2017 15:34:39 +0200
+Subject: [PATCH] MIPS: ath79: fix AR724X_PLL_REG_PCIE_CONFIG offset
+
+According to the QCA u-boot source the "PCIE Phase Lock Loop
+Configuration (PCIE_PLL_CONFIG)" register is for all SoCs except the
+QCA955X and QCA956X at offset 0x10.
+
+Since the PCIE PLL config register is only defined for the AR724x fix
+only this value. The value is wrong since the day it was added and isn't
+yet used by any driver.
+
+Signed-off-by: Mathias Kresin <dev@kresin.me>
+---
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -167,7 +167,7 @@
+ #define AR71XX_AHB_DIV_MASK           0x7
+ #define AR724X_PLL_REG_CPU_CONFIG     0x00
+-#define AR724X_PLL_REG_PCIE_CONFIG    0x18
++#define AR724X_PLL_REG_PCIE_CONFIG    0x10
+ #define AR724X_PLL_FB_SHIFT           0
+ #define AR724X_PLL_FB_MASK            0x3ff
diff --git a/target/linux/ar71xx/patches-4.9/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch b/target/linux/ar71xx/patches-4.9/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch
new file mode 100644 (file)
index 0000000..3af99bf
--- /dev/null
@@ -0,0 +1,113 @@
+From 460f382c278fe66059a773c41cbcd0db86d53983 Mon Sep 17 00:00:00 2001
+From: Mathias Kresin <dev@kresin.me>
+Date: Thu, 13 Apr 2017 09:47:42 +0200
+Subject: [PATCH] MIPS: pci-ar724x: get PCIe controller out of reset
+
+The ar724x pci driver expects the PCIe controller to be brought out of
+reset by the bootloader.
+
+At least the AVM Fritz 300E bootloader doesn't take care of releasing
+the different PCIe controller related resets which causes an endless
+hang as soon as either the PCIE Reset register (0x180f0018) or the PCI
+Application Control register (0x180f0000) is read from.
+
+Do the full "PCIE Root Complex Initialization Sequence" if the PCIe
+host controller is still in reset during probing.
+
+The QCA u-boot sleeps 10ms after the PCIE Application Control bit is
+set to ready. It has been shown that 10ms might not be enough time if
+PCIe should be used right after setting the bit. During my tests it
+took up to 20ms till the link was up. Giving the link up to 100ms
+should work for all cases.
+
+Signed-off-by: Mathias Kresin <dev@kresin.me>
+---
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h |  3 ++
+ arch/mips/pci/pci-ar724x.c                     | 42 ++++++++++++++++++++++++++
+ 2 files changed, 45 insertions(+)
+
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -169,6 +169,9 @@
+ #define AR724X_PLL_REG_CPU_CONFIG     0x00
+ #define AR724X_PLL_REG_PCIE_CONFIG    0x10
++#define AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS BIT(16)
++#define AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET  BIT(25)
++
+ #define AR724X_PLL_FB_SHIFT           0
+ #define AR724X_PLL_FB_MASK            0x3ff
+ #define AR724X_PLL_REF_DIV_SHIFT      10
+--- a/arch/mips/pci/pci-ar724x.c
++++ b/arch/mips/pci/pci-ar724x.c
+@@ -12,14 +12,18 @@
+ #include <linux/irq.h>
+ #include <linux/pci.h>
+ #include <linux/init.h>
++#include <linux/delay.h>
+ #include <linux/platform_device.h>
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/ar71xx_regs.h>
++#define AR724X_PCI_REG_APP            0x0
+ #define AR724X_PCI_REG_RESET          0x18
+ #define AR724X_PCI_REG_INT_STATUS     0x4c
+ #define AR724X_PCI_REG_INT_MASK               0x50
++#define AR724X_PCI_APP_LTSSM_ENABLE   BIT(0)
++
+ #define AR724X_PCI_RESET_LINK_UP      BIT(0)
+ #define AR724X_PCI_INT_DEV0           BIT(14)
+@@ -325,6 +329,37 @@ static void ar724x_pci_irq_init(struct a
+                                        apc);
+ }
++static void ar724x_pci_hw_init(struct ar724x_pci_controller *apc)
++{
++      u32 ppl, app;
++      int wait = 0;
++
++      /* deassert PCIe host controller and PCIe PHY reset */
++      ath79_device_reset_clear(AR724X_RESET_PCIE);
++      ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
++
++      /* remove the reset of the PCIE PLL */
++      ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
++      ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
++      ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
++
++      /* deassert bypass for the PCIE PLL */
++      ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
++      ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
++      ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
++
++      /* set PCIE Application Control to ready */
++      app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP);
++      app |= AR724X_PCI_APP_LTSSM_ENABLE;
++      __raw_writel(app, apc->ctrl_base + AR724X_PCI_REG_APP);
++
++      /* wait up to 100ms for PHY link up */
++      do {
++              mdelay(10);
++              wait++;
++      } while (wait < 10 && !ar724x_pci_check_link(apc));
++}
++
+ static int ar724x_pci_probe(struct platform_device *pdev)
+ {
+       struct ar724x_pci_controller *apc;
+@@ -383,6 +418,13 @@ static int ar724x_pci_probe(struct platf
+       apc->pci_controller.io_resource = &apc->io_res;
+       apc->pci_controller.mem_resource = &apc->mem_res;
++      /*
++       * Do the full PCIE Root Complex Initialization Sequence if the PCIe
++       * host controller is in reset.
++       */
++      if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
++              ar724x_pci_hw_init(apc);
++
+       apc->link_up = ar724x_pci_check_link(apc);
+       if (!apc->link_up)
+               dev_warn(&pdev->dev, "PCIe link is down\n");
diff --git a/target/linux/ar71xx/patches-4.9/200-MIPS-ath79-fix-ar933x-wmac-reset.patch b/target/linux/ar71xx/patches-4.9/200-MIPS-ath79-fix-ar933x-wmac-reset.patch
new file mode 100644 (file)
index 0000000..b7ae0ce
--- /dev/null
@@ -0,0 +1,30 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -62,10 +62,26 @@ static void __init ar913x_wmac_setup(voi
+ static int ar933x_wmac_reset(void)
+ {
++      int retries = 20;
++
+       ath79_device_reset_set(AR933X_RESET_WMAC);
+       ath79_device_reset_clear(AR933X_RESET_WMAC);
+-      return 0;
++      while (1) {
++              u32 bootstrap;
++
++              bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
++              if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0)
++                      return 0;
++
++              if (retries-- == 0)
++                      break;
++
++              udelay(10000);
++      }
++
++      pr_err("ar933x: WMAC reset timed out");
++      return -ETIMEDOUT;
+ }
+ static int ar933x_r1_get_wmac_revision(void)
diff --git a/target/linux/ar71xx/patches-4.9/201-ar913x_wmac_external_reset.patch b/target/linux/ar71xx/patches-4.9/201-ar913x_wmac_external_reset.patch
new file mode 100644 (file)
index 0000000..9b704a3
--- /dev/null
@@ -0,0 +1,31 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -44,7 +44,7 @@ static struct platform_device ath79_wmac
+       },
+ };
+-static void __init ar913x_wmac_setup(void)
++static int ar913x_wmac_reset(void)
+ {
+       /* reset the WMAC */
+       ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
+@@ -53,10 +53,19 @@ static void __init ar913x_wmac_setup(voi
+       ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
+       mdelay(10);
++      return 0;
++}
++
++static void __init ar913x_wmac_setup(void)
++{
++      ar913x_wmac_reset();
++
+       ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
+       ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
+       ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
+       ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
++
++      ath79_wmac_data.external_reset = ar913x_wmac_reset;
+ }
diff --git a/target/linux/ar71xx/patches-4.9/202-MIPS-ath79-ar934x-wmac-revision.patch b/target/linux/ar71xx/patches-4.9/202-MIPS-ath79-ar934x-wmac-revision.patch
new file mode 100644 (file)
index 0000000..0f8016f
--- /dev/null
@@ -0,0 +1,11 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -139,6 +139,8 @@ static void ar934x_wmac_setup(void)
+               ath79_wmac_data.is_clk_25mhz = false;
+       else
+               ath79_wmac_data.is_clk_25mhz = true;
++
++      ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
+ }
+ static void qca955x_wmac_setup(void)
diff --git a/target/linux/ar71xx/patches-4.9/203-MIPS-ath79-fix-restart.patch b/target/linux/ar71xx/patches-4.9/203-MIPS-ath79-fix-restart.patch
new file mode 100644 (file)
index 0000000..48f4d95
--- /dev/null
@@ -0,0 +1,20 @@
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -40,6 +40,7 @@ static char ath79_sys_type[ATH79_SYS_TYP
+ static void ath79_restart(char *command)
+ {
++      local_irq_disable();
+       ath79_device_reset_set(AR71XX_RESET_FULL_CHIP);
+       for (;;)
+               if (cpu_wait)
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -135,6 +135,7 @@ static inline u32 ath79_pll_rr(unsigned
+ static inline void ath79_reset_wr(unsigned reg, u32 val)
+ {
+       __raw_writel(val, ath79_reset_base + reg);
++      (void) __raw_readl(ath79_reset_base + reg); /* flush */
+ }
+ static inline u32 ath79_reset_rr(unsigned reg)
diff --git a/target/linux/ar71xx/patches-4.9/220-add_cpu_feature_overrides.patch b/target/linux/ar71xx/patches-4.9/220-add_cpu_feature_overrides.patch
new file mode 100644 (file)
index 0000000..d925f92
--- /dev/null
@@ -0,0 +1,28 @@
+--- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
++++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
+@@ -36,6 +36,7 @@
+ #define cpu_has_mdmx          0
+ #define cpu_has_mips3d                0
+ #define cpu_has_smartmips     0
++#define cpu_has_rixi          0
+ #define cpu_has_mips32r1      1
+ #define cpu_has_mips32r2      1
+@@ -43,6 +44,7 @@
+ #define cpu_has_mips64r2      0
+ #define cpu_has_mipsmt                0
++#define cpu_has_userlocal     0
+ #define cpu_has_64bits                0
+ #define cpu_has_64bit_zero_reg        0
+@@ -51,5 +53,9 @@
+ #define cpu_dcache_line_size()        32
+ #define cpu_icache_line_size()        32
++#define cpu_has_vtag_icache   0
++#define cpu_has_dc_aliases    1
++#define cpu_has_ic_fills_f_dc 0
++#define cpu_has_pindexed_dcache       0
+ #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/ar71xx/patches-4.9/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch b/target/linux/ar71xx/patches-4.9/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch
new file mode 100644 (file)
index 0000000..0bc64b7
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/arch/mips/include/asm/mips_machine.h
++++ b/arch/mips/include/asm/mips_machine.h
+@@ -36,6 +36,18 @@ static struct mips_machine machine_##_ty
+       .mach_setup     = _setup,                               \
+ };
++#define MIPS_MACHINE_NONAME(_type, _id, _setup)               \
++static const char machine_id_##_type[] __initconst            \
++                      __aligned(1) = _id;                     \
++static struct mips_machine machine_##_type                    \
++              __used __section(.mips.machines.init) =         \
++{                                                             \
++      .mach_type      = _type,                                \
++      .mach_id        = machine_id_##_type,                   \
++      .mach_name      = NULL,                                 \
++      .mach_setup     = _setup,                               \
++};
++
+ extern long __mips_machines_start;
+ extern long __mips_machines_end;
diff --git a/target/linux/ar71xx/patches-4.9/310-lib-add-rle-decompression.patch b/target/linux/ar71xx/patches-4.9/310-lib-add-rle-decompression.patch
new file mode 100644 (file)
index 0000000..d848012
--- /dev/null
@@ -0,0 +1,124 @@
+--- a/lib/Kconfig
++++ b/lib/Kconfig
+@@ -247,6 +247,9 @@ config LZMA_COMPRESS
+ config LZMA_DECOMPRESS
+     tristate
++config RLE_DECOMPRESS
++      tristate
++
+ #
+ # These all provide a common interface (hence the apparent duplication with
+ # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+--- a/lib/Makefile
++++ b/lib/Makefile
+@@ -120,6 +120,7 @@ obj-$(CONFIG_XZ_DEC) += xz/
+ obj-$(CONFIG_RAID6_PQ) += raid6/
+ obj-$(CONFIG_LZMA_COMPRESS) += lzma/
+ obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
++obj-$(CONFIG_RLE_DECOMPRESS) += rle.o
+ lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+ lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+--- /dev/null
++++ b/include/linux/rle.h
+@@ -0,0 +1,18 @@
++#ifndef _RLE_H_
++#define _RLE_H_
++
++#ifdef CONFIG_RLE_DECOMPRESS
++int rle_decode(const unsigned char *src, size_t srclen,
++             unsigned char *dst, size_t dstlen,
++             size_t *src_done, size_t *dst_done);
++#else
++static inline int
++rle_decode(const unsigned char *src, size_t srclen,
++         unsigned char *dst, size_t dstlen,
++         size_t *src_done, size_t *dst_done)
++{
++      return -ENOTSUPP;
++}
++#endif /* CONFIG_RLE_DECOMPRESS */
++
++#endif /* _RLE_H_ */
+--- /dev/null
++++ b/lib/rle.c
+@@ -0,0 +1,78 @@
++/*
++ *  RLE decoding routine
++ *
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/rle.h>
++
++int rle_decode(const unsigned char *src, size_t srclen,
++             unsigned char *dst, size_t dstlen,
++             size_t *src_done, size_t *dst_done)
++{
++      size_t srcpos, dstpos;
++      int ret;
++
++      srcpos = 0;
++      dstpos = 0;
++      ret = -EINVAL;
++
++      /* sanity checks */
++      if (!src || !srclen || !dst || !dstlen)
++              goto out;
++
++      while (1) {
++              char count;
++
++              if (srcpos >= srclen)
++                      break;
++
++              count = (char) src[srcpos++];
++              if (count == 0) {
++                      ret = 0;
++                      break;
++              }
++
++              if (count > 0) {
++                      unsigned char c;
++
++                      if (srcpos >= srclen)
++                              break;
++
++                      c = src[srcpos++];
++
++                      while (count--) {
++                              if (dstpos >= dstlen)
++                                      break;
++
++                              dst[dstpos++] = c;
++                      }
++              } else {
++                      count *= -1;
++
++                      while (count--) {
++                              if (srcpos >= srclen)
++                                      break;
++                              if (dstpos >= dstlen)
++                                      break;
++                              dst[dstpos++] = src[srcpos++];
++                      }
++              }
++      }
++
++out:
++      if (src_done)
++              *src_done = srcpos;
++      if (dst_done)
++              *dst_done = dstpos;
++
++      return ret;
++}
++
++EXPORT_SYMBOL_GPL(rle_decode);
diff --git a/target/linux/ar71xx/patches-4.9/401-mtd-physmap-add-lock-unlock.patch b/target/linux/ar71xx/patches-4.9/401-mtd-physmap-add-lock-unlock.patch
new file mode 100644 (file)
index 0000000..db7b3ca
--- /dev/null
@@ -0,0 +1,94 @@
+--- a/drivers/mtd/maps/physmap.c
++++ b/drivers/mtd/maps/physmap.c
+@@ -31,6 +31,66 @@ struct physmap_flash_info {
+       int                     vpp_refcnt;
+ };
++static struct platform_device *physmap_map2pdev(struct map_info *map)
++{
++      return (struct platform_device *) map->map_priv_1;
++}
++
++static void physmap_lock(struct map_info *map)
++{
++      struct platform_device *pdev;
++      struct physmap_flash_data *physmap_data;
++
++      pdev = physmap_map2pdev(map);
++      physmap_data = pdev->dev.platform_data;
++      physmap_data->lock(pdev);
++}
++
++static void physmap_unlock(struct map_info *map)
++{
++      struct platform_device *pdev;
++      struct physmap_flash_data *physmap_data;
++
++      pdev = physmap_map2pdev(map);
++      physmap_data = pdev->dev.platform_data;
++      physmap_data->unlock(pdev);
++}
++
++static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs)
++{
++      map_word ret;
++
++      physmap_lock(map);
++      ret = inline_map_read(map, ofs);
++      physmap_unlock(map);
++
++      return ret;
++}
++
++static void physmap_flash_write_lock(struct map_info *map, map_word d,
++                                   unsigned long ofs)
++{
++      physmap_lock(map);
++      inline_map_write(map, d, ofs);
++      physmap_unlock(map);
++}
++
++static void physmap_flash_copy_from_lock(struct map_info *map, void *to,
++                                       unsigned long from, ssize_t len)
++{
++      physmap_lock(map);
++      inline_map_copy_from(map, to, from, len);
++      physmap_unlock(map);
++}
++
++static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to,
++                                     const void *from, ssize_t len)
++{
++      physmap_lock(map);
++      inline_map_copy_to(map, to, from, len);
++      physmap_unlock(map);
++}
++
+ static int physmap_flash_remove(struct platform_device *dev)
+ {
+       struct physmap_flash_info *info;
+@@ -153,6 +213,13 @@ static int physmap_flash_probe(struct pl
+               simple_map_init(&info->map[i]);
++              if (physmap_data->lock && physmap_data->unlock) {
++                      info->map[i].read = physmap_flash_read_lock;
++                      info->map[i].write = physmap_flash_write_lock;
++                      info->map[i].copy_from = physmap_flash_copy_from_lock;
++                      info->map[i].copy_to = physmap_flash_copy_to_lock;
++              }
++
+               probe_type = rom_probe_types;
+               if (physmap_data->probe_type == NULL) {
+                       for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
+--- a/include/linux/mtd/physmap.h
++++ b/include/linux/mtd/physmap.h
+@@ -25,6 +25,8 @@ struct physmap_flash_data {
+       unsigned int            width;
+       int                     (*init)(struct platform_device *);
+       void                    (*exit)(struct platform_device *);
++      void                    (*lock)(struct platform_device *);
++      void                    (*unlock)(struct platform_device *);
+       void                    (*set_vpp)(struct platform_device *, int);
+       unsigned int            nr_parts;
+       unsigned int            pfow_base;
diff --git a/target/linux/ar71xx/patches-4.9/402-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-4.9/402-mtd-SST39VF6401B-support.patch
new file mode 100644 (file)
index 0000000..0d483ab
--- /dev/null
@@ -0,0 +1,29 @@
+--- a/drivers/mtd/chips/jedec_probe.c
++++ b/drivers/mtd/chips/jedec_probe.c
+@@ -148,6 +148,7 @@
+ #define SST39LF160    0x2782
+ #define SST39VF1601   0x234b
+ #define SST39VF3201   0x235b
++#define SST39VF6401B  0x236d
+ #define SST39WF1601   0x274b
+ #define SST39WF1602   0x274a
+ #define SST39LF512    0x00D4
+@@ -1569,6 +1570,18 @@ static const struct amd_flash_info jedec
+                       ERASEINFO(0x10000,64),
+               }
+       }, {
++              .mfr_id         = CFI_MFR_SST,
++              .dev_id         = SST39VF6401B,
++              .name           = "SST 39VF6401B",
++              .devtypes       = CFI_DEVICETYPE_X16,
++              .uaddr          = MTD_UADDR_0xAAAA_0x5555,
++              .dev_size       = SIZE_8MiB,
++              .cmd_set        = P_ID_AMD_STD,
++              .nr_regions     = 1,
++              .regions        = {
++                      ERASEINFO(0x10000,128)
++              }
++      }, {
+               .mfr_id         = CFI_MFR_ST,
+               .dev_id         = M29F800AB,
+               .name           = "ST M29F800AB",
diff --git a/target/linux/ar71xx/patches-4.9/403-mtd_fix_cfi_cmdset_0002_status_check.patch b/target/linux/ar71xx/patches-4.9/403-mtd_fix_cfi_cmdset_0002_status_check.patch
new file mode 100644 (file)
index 0000000..415d835
--- /dev/null
@@ -0,0 +1,69 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -1630,8 +1630,8 @@ static int __xipram do_write_oneword(str
+                       break;
+               }
+-              if (chip_ready(map, adr))
+-                      break;
++              if (chip_good(map, adr, datum))
++                      goto enable_xip;
+               /* Latency issues. Drop the lock, wait a while and retry */
+               UDELAY(map, chip, adr, 1);
+@@ -1647,6 +1647,8 @@ static int __xipram do_write_oneword(str
+               ret = -EIO;
+       }
++
++ enable_xip:
+       xip_enable(map, chip, adr);
+  op_done:
+       if (mode == FL_OTP_WRITE)
+@@ -2225,7 +2227,6 @@ static int cfi_amdstd_panic_write(struct
+       return 0;
+ }
+-
+ /*
+  * Handle devices with one erase region, that only implement
+  * the chip erase command.
+@@ -2289,8 +2290,8 @@ static int __xipram do_erase_chip(struct
+                       chip->erase_suspended = 0;
+               }
+-              if (chip_ready(map, adr))
+-                      break;
++              if (chip_good(map, adr, map_word_ff(map)))
++                      goto op_done;
+               if (time_after(jiffies, timeo)) {
+                       printk(KERN_WARNING "MTD %s(): software timeout\n",
+@@ -2310,6 +2311,7 @@ static int __xipram do_erase_chip(struct
+               ret = -EIO;
+       }
++ op_done:
+       chip->state = FL_READY;
+       xip_enable(map, chip, adr);
+       DISABLE_VPP(map);
+@@ -2378,9 +2380,9 @@ static int __xipram do_erase_oneblock(st
+                       chip->erase_suspended = 0;
+               }
+-              if (chip_ready(map, adr)) {
++              if (chip_good(map, adr, map_word_ff(map))) {
+                       xip_enable(map, chip, adr);
+-                      break;
++                      goto op_done;
+               }
+               if (time_after(jiffies, timeo)) {
+@@ -2402,6 +2404,7 @@ static int __xipram do_erase_oneblock(st
+               ret = -EIO;
+       }
++ op_done:
+       chip->state = FL_READY;
+       DISABLE_VPP(map);
+       put_chip(map, chip, adr);
diff --git a/target/linux/ar71xx/patches-4.9/404-mtd-cybertan-trx-parser.patch b/target/linux/ar71xx/patches-4.9/404-mtd-cybertan-trx-parser.patch
new file mode 100644 (file)
index 0000000..6c2322e
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -178,6 +178,12 @@ menu "Partition parsers"
+ source "drivers/mtd/parsers/Kconfig"
+ endmenu
++config MTD_CYBERTAN_PARTS
++      tristate "Cybertan partitioning support"
++      depends on ATH79
++      ---help---
++         Cybertan partitioning support
++
+ config MTD_MYLOADER_PARTS
+       tristate "MyLoader partition parsing"
+       depends on ADM5120 || ATH25 || ATH79
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS)      += bcm63
+ obj-$(CONFIG_MTD_BCM47XX_PARTS)       += bcm47xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ obj-y                         += parsers/
++obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o
+ # 'Users' - code which presents functionality to userspace.
+ obj-$(CONFIG_MTD_BLKDEVS)     += mtd_blkdevs.o
diff --git a/target/linux/ar71xx/patches-4.9/405-mtd-tp-link-partition-parser.patch b/target/linux/ar71xx/patches-4.9/405-mtd-tp-link-partition-parser.patch
new file mode 100644 (file)
index 0000000..a53d950
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/drivers/mtd/Kconfig
++++ b/drivers/mtd/Kconfig
+@@ -200,6 +200,12 @@ config MTD_MYLOADER_PARTS
+         You will still need the parsing functions to be called by the driver
+         for your particular device. It won't happen automatically.
++config MTD_TPLINK_PARTS
++      tristate "TP-Link AR7XXX/AR9XXX partitioning support"
++      depends on ATH79
++      ---help---
++        TBD.
++
+ comment "User Modules And Translation Layers"
+ #
+--- a/drivers/mtd/Makefile
++++ b/drivers/mtd/Makefile
+@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS)      += bcm63
+ obj-$(CONFIG_MTD_BCM47XX_PARTS)       += bcm47xxpart.o
+ obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
+ obj-y                         += parsers/
++obj-$(CONFIG_MTD_TPLINK_PARTS)        += tplinkpart.o
+ obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o
+ # 'Users' - code which presents functionality to userspace.
diff --git a/target/linux/ar71xx/patches-4.9/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch b/target/linux/ar71xx/patches-4.9/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch
new file mode 100644 (file)
index 0000000..4fa957e
--- /dev/null
@@ -0,0 +1,34 @@
+--- a/drivers/mtd/devices/m25p80.c
++++ b/drivers/mtd/devices/m25p80.c
+@@ -192,6 +192,7 @@ static ssize_t m25p80_read(struct spi_no
+  */
+ static int m25p_probe(struct spi_device *spi)
+ {
++      struct mtd_part_parser_data     ppdata = {0,};
+       struct flash_platform_data      *data;
+       struct m25p *flash;
+       struct spi_nor *nor;
+@@ -244,8 +245,11 @@ static int m25p_probe(struct spi_device
+       if (ret)
+               return ret;
+-      return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
+-                                 data ? data->nr_parts : 0);
++      return mtd_device_parse_register(&nor->mtd,
++                      data ? data->part_probes : NULL,
++                      &ppdata,
++                      data ? data->parts : NULL,
++                      data ? data->nr_parts : 0);
+ }
+--- a/include/linux/spi/flash.h
++++ b/include/linux/spi/flash.h
+@@ -24,6 +24,7 @@ struct flash_platform_data {
+       unsigned int    nr_parts;
+       char            *type;
++      const char      **part_probes;
+       /* we'll likely add more ... use JEDEC IDs, etc */
+ };
diff --git a/target/linux/ar71xx/patches-4.9/408-mtd-redboot_partition_scan.patch b/target/linux/ar71xx/patches-4.9/408-mtd-redboot_partition_scan.patch
new file mode 100644 (file)
index 0000000..cd41e7c
--- /dev/null
@@ -0,0 +1,44 @@
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -76,12 +76,18 @@ static int parse_redboot_partitions(stru
+       static char nullstring[] = "unallocated";
+ #endif
++      buf = vmalloc(master->erasesize);
++      if (!buf)
++              return -ENOMEM;
++
++ restart:
+       if ( directory < 0 ) {
+               offset = master->size + directory * master->erasesize;
+               while (mtd_block_isbad(master, offset)) {
+                       if (!offset) {
+                       nogood:
+                               printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
++                              vfree(buf);
+                               return -EIO;
+                       }
+                       offset -= master->erasesize;
+@@ -94,10 +100,6 @@ static int parse_redboot_partitions(stru
+                               goto nogood;
+               }
+       }
+-      buf = vmalloc(master->erasesize);
+-
+-      if (!buf)
+-              return -ENOMEM;
+       printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
+              master->name, offset);
+@@ -170,6 +172,11 @@ static int parse_redboot_partitions(stru
+       }
+       if (i == numslots) {
+               /* Didn't find it */
++              if (offset + master->erasesize < master->size) {
++                      /* not at the end of the flash yet, maybe next block :) */
++                      directory++;
++                      goto restart;
++              }
+               printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
+                      master->name);
+               ret = 0;
diff --git a/target/linux/ar71xx/patches-4.9/409-mtd-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-4.9/409-mtd-rb4xx_nand_driver.patch
new file mode 100644 (file)
index 0000000..93d34b8
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -569,4 +569,8 @@ config MTD_NAND_MTK
+         Enables support for NAND controller on MTK SoCs.
+         This controller is found on mt27xx, mt81xx, mt65xx SoCs.
++config MTD_NAND_RB4XX
++      tristate "NAND flash driver for RouterBoard 4xx series"
++      depends on MTD_NAND && ATH79_MACH_RB4XX
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -33,6 +33,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270)               += cmx27
+ obj-$(CONFIG_MTD_NAND_PXA3xx)         += pxa3xx_nand.o
+ obj-$(CONFIG_MTD_NAND_TMIO)           += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)               += plat_nand.o
++obj-$(CONFIG_MTD_NAND_RB4XX)          += rb4xx_nand.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)         += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)          += orion_nand.o
+ obj-$(CONFIG_MTD_NAND_FSL_ELBC)               += fsl_elbc_nand.o
diff --git a/target/linux/ar71xx/patches-4.9/410-mtd-rb750-nand-driver.patch b/target/linux/ar71xx/patches-4.9/410-mtd-rb750-nand-driver.patch
new file mode 100644 (file)
index 0000000..9ea879c
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -573,4 +573,8 @@ config MTD_NAND_RB4XX
+       tristate "NAND flash driver for RouterBoard 4xx series"
+       depends on MTD_NAND && ATH79_MACH_RB4XX
++config MTD_NAND_RB750
++      tristate "NAND flash driver for the RouterBoard 750"
++      depends on MTD_NAND && ATH79_MACH_RB750
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx)                += pxa3xx
+ obj-$(CONFIG_MTD_NAND_TMIO)           += tmio_nand.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM)               += plat_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX)          += rb4xx_nand.o
++obj-$(CONFIG_MTD_NAND_RB750)          += rb750_nand.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)         += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)          += orion_nand.o
+ obj-$(CONFIG_MTD_NAND_FSL_ELBC)               += fsl_elbc_nand.o
diff --git a/target/linux/ar71xx/patches-4.9/411-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-4.9/411-mtd-cfi_cmdset_0002-force-word-write.patch
new file mode 100644 (file)
index 0000000..7f5b2f5
--- /dev/null
@@ -0,0 +1,61 @@
+--- a/drivers/mtd/chips/cfi_cmdset_0002.c
++++ b/drivers/mtd/chips/cfi_cmdset_0002.c
+@@ -40,7 +40,7 @@
+ #include <linux/mtd/xip.h>
+ #define AMD_BOOTLOC_BUG
+-#define FORCE_WORD_WRITE 0
++#define FORCE_WORD_WRITE 1
+ #define MAX_WORD_RETRIES 3
+@@ -51,7 +51,9 @@
+ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
+ static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#if !FORCE_WORD_WRITE
+ static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
++#endif
+ static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
+ static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
+ static void cfi_amdstd_sync (struct mtd_info *);
+@@ -202,6 +204,7 @@ static void fixup_amd_bootblock(struct m
+ }
+ #endif
++#if !FORCE_WORD_WRITE
+ static void fixup_use_write_buffers(struct mtd_info *mtd)
+ {
+       struct map_info *map = mtd->priv;
+@@ -211,6 +214,7 @@ static void fixup_use_write_buffers(stru
+               mtd->_write = cfi_amdstd_write_buffers;
+       }
+ }
++#endif /* !FORCE_WORD_WRITE */
+ /* Atmel chips don't use the same PRI format as AMD chips */
+ static void fixup_convert_atmel_pri(struct mtd_info *mtd)
+@@ -1789,6 +1793,7 @@ static int cfi_amdstd_write_words(struct
+ /*
+  * FIXME: interleaved mode not tested, and probably not supported!
+  */
++#if !FORCE_WORD_WRITE
+ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+                                   unsigned long adr, const u_char *buf,
+                                   int len)
+@@ -1917,7 +1922,6 @@ static int __xipram do_write_buffer(stru
+       return ret;
+ }
+-
+ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+                                   size_t *retlen, const u_char *buf)
+ {
+@@ -1992,6 +1996,7 @@ static int cfi_amdstd_write_buffers(stru
+       return 0;
+ }
++#endif /* !FORCE_WORD_WRITE */
+ /*
+  * Wait for the flash chip to become ready to write data
diff --git a/target/linux/ar71xx/patches-4.9/413-mtd-ar934x-nand-driver.patch b/target/linux/ar71xx/patches-4.9/413-mtd-ar934x-nand-driver.patch
new file mode 100644 (file)
index 0000000..9f9c339
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -577,4 +577,12 @@ config MTD_NAND_RB750
+       tristate "NAND flash driver for the RouterBoard 750"
+       depends on MTD_NAND && ATH79_MACH_RB750
++config MTD_NAND_AR934X
++      tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
++      depends on (SOC_AR934X || SOC_QCA955X)
++
++config MTD_NAND_AR934X_HW_ECC
++      bool "Hardware ECC support for the AR934X NAND Controller (EXPERIMENTAL)"
++      depends on MTD_NAND_AR934X
++
+ endif # MTD_NAND
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_NAND_AMS_DELTA)     += ams-
+ obj-$(CONFIG_MTD_NAND_DENALI)         += denali.o
+ obj-$(CONFIG_MTD_NAND_DENALI_PCI)     += denali_pci.o
+ obj-$(CONFIG_MTD_NAND_DENALI_DT)      += denali_dt.o
++obj-$(CONFIG_MTD_NAND_AR934X)         += ar934x_nfc.o
+ obj-$(CONFIG_MTD_NAND_AU1550)         += au1550nd.o
+ obj-$(CONFIG_MTD_NAND_BF5XX)          += bf5xx_nand.o
+ obj-$(CONFIG_MTD_NAND_S3C2410)                += s3c2410.o
diff --git a/target/linux/ar71xx/patches-4.9/414-mtd-rb91x-nand-driver.patch b/target/linux/ar71xx/patches-4.9/414-mtd-rb91x-nand-driver.patch
new file mode 100644 (file)
index 0000000..d1b61f0
--- /dev/null
@@ -0,0 +1,23 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -577,6 +577,10 @@ config MTD_NAND_RB750
+       tristate "NAND flash driver for the RouterBoard 750"
+       depends on MTD_NAND && ATH79_MACH_RB750
++config MTD_NAND_RB91X
++      tristate "NAND flash driver for the RouterBOARD 91x series"
++      depends on MTD_NAND && ATH79_MACH_RB91X
++
+ config MTD_NAND_AR934X
+       tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
+       depends on (SOC_AR934X || SOC_QCA955X)
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -36,6 +36,7 @@ obj-$(CONFIG_MTD_NAND_TMIO)          += tmio_nan
+ obj-$(CONFIG_MTD_NAND_PLATFORM)               += plat_nand.o
+ obj-$(CONFIG_MTD_NAND_RB4XX)          += rb4xx_nand.o
+ obj-$(CONFIG_MTD_NAND_RB750)          += rb750_nand.o
++obj-$(CONFIG_MTD_NAND_RB91X)          += rb91x_nand.o
+ obj-$(CONFIG_MTD_NAND_PASEMI)         += pasemi_nand.o
+ obj-$(CONFIG_MTD_NAND_ORION)          += orion_nand.o
+ obj-$(CONFIG_MTD_NAND_FSL_ELBC)               += fsl_elbc_nand.o
diff --git a/target/linux/ar71xx/patches-4.9/420-net-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-4.9/420-net-ar71xx_mac_driver.patch
new file mode 100644 (file)
index 0000000..feb2e6a
--- /dev/null
@@ -0,0 +1,28 @@
+--- a/drivers/net/ethernet/atheros/Kconfig
++++ b/drivers/net/ethernet/atheros/Kconfig
+@@ -5,7 +5,7 @@
+ config NET_VENDOR_ATHEROS
+       bool "Atheros devices"
+       default y
+-      depends on PCI
++      depends on (PCI || ATH79)
+       ---help---
+         If you have a network (Ethernet) card belonging to this class, say Y.
+@@ -78,4 +78,6 @@ config ALX
+         To compile this driver as a module, choose M here.  The module
+         will be called alx.
++source drivers/net/ethernet/atheros/ag71xx/Kconfig
++
+ endif # NET_VENDOR_ATHEROS
+--- a/drivers/net/ethernet/atheros/Makefile
++++ b/drivers/net/ethernet/atheros/Makefile
+@@ -2,6 +2,7 @@
+ # Makefile for the Atheros network device drivers.
+ #
++obj-$(CONFIG_AG71XX) += ag71xx/
+ obj-$(CONFIG_ATL1) += atlx/
+ obj-$(CONFIG_ATL2) += atlx/
+ obj-$(CONFIG_ATL1E) += atl1e/
diff --git a/target/linux/ar71xx/patches-4.9/423-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-4.9/423-dsa-add-88e6063-driver.patch
new file mode 100644 (file)
index 0000000..1df93e9
--- /dev/null
@@ -0,0 +1,24 @@
+--- a/drivers/net/dsa/Kconfig
++++ b/drivers/net/dsa/Kconfig
+@@ -9,6 +9,13 @@ config NET_DSA_MV88E6060
+         This enables support for the Marvell 88E6060 ethernet switch
+         chip.
++config NET_DSA_MV88E6063
++      bool "Marvell 88E6063 ethernet switch chip support"
++      select NET_DSA_TAG_TRAILER
++      ---help---
++        This enables support for the Marvell 88E6063 ethernet switch
++        chip
++
+ config NET_DSA_BCM_SF2
+       tristate "Broadcom Starfighter 2 Ethernet switch support"
+       depends on HAS_IOMEM && NET_DSA
+--- a/drivers/net/dsa/Makefile
++++ b/drivers/net/dsa/Makefile
+@@ -1,4 +1,5 @@
+ obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
++obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
+ obj-$(CONFIG_NET_DSA_BCM_SF2) += bcm_sf2.o
+ obj-$(CONFIG_NET_DSA_QCA8K)   += qca8k.o
diff --git a/target/linux/ar71xx/patches-4.9/430-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-4.9/430-drivers-link-spi-before-mtd.patch
new file mode 100644 (file)
index 0000000..a862454
--- /dev/null
@@ -0,0 +1,12 @@
+--- a/drivers/Makefile
++++ b/drivers/Makefile
+@@ -77,8 +77,8 @@ obj-$(CONFIG_SCSI)           += scsi/
+ obj-y                         += nvme/
+ obj-$(CONFIG_ATA)             += ata/
+ obj-$(CONFIG_TARGET_CORE)     += target/
+-obj-$(CONFIG_MTD)             += mtd/
+ obj-$(CONFIG_SPI)             += spi/
++obj-$(CONFIG_MTD)             += mtd/
+ obj-$(CONFIG_SPMI)            += spmi/
+ obj-$(CONFIG_HSI)             += hsi/
+ obj-y                         += net/
diff --git a/target/linux/ar71xx/patches-4.9/432-spi-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-4.9/432-spi-rb4xx-spi-driver.patch
new file mode 100644 (file)
index 0000000..e896d0b
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -533,6 +533,12 @@ config SPI_QUP
+         This driver can also be built as a module.  If so, the module
+         will be called spi_qup.
++config SPI_RB4XX
++      tristate "Mikrotik RB4XX SPI master"
++      depends on SPI_MASTER && ATH79_MACH_RB4XX
++      help
++        SPI controller driver for the Mikrotik RB4xx series boards.
++
+ config SPI_S3C24XX
+       tristate "Samsung S3C24XX series SPI"
+       depends on ARCH_S3C24XX
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -72,6 +72,7 @@ obj-$(CONFIG_SPI_PPC4xx)             += spi-ppc4xx.
+ spi-pxa2xx-platform-objs              := spi-pxa2xx.o spi-pxa2xx-dma.o
+ obj-$(CONFIG_SPI_PXA2XX)              += spi-pxa2xx-platform.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI)          += spi-pxa2xx-pci.o
++obj-$(CONFIG_SPI_RB4XX)                       += spi-rb4xx.o
+ obj-$(CONFIG_SPI_QUP)                 += spi-qup.o
+ obj-$(CONFIG_SPI_ROCKCHIP)            += spi-rockchip.o
+ obj-$(CONFIG_SPI_RB4XX)                       += spi-rb4xx.o
diff --git a/target/linux/ar71xx/patches-4.9/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-4.9/433-spi-rb4xx-cpld-driver.patch
new file mode 100644 (file)
index 0000000..c44acab
--- /dev/null
@@ -0,0 +1,26 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -761,6 +761,13 @@ config SPI_TLE62X0
+         sysfs interface, with each line presented as a kind of GPIO
+         exposing both switch control and diagnostic feedback.
++config SPI_RB4XX_CPLD
++      tristate "MikroTik RB4XX CPLD driver"
++      depends on ATH79_MACH_RB4XX
++      help
++        SPI driver for the Xilinx CPLD chip present on the
++        MikroTik RB4xx boards.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -73,6 +73,7 @@ spi-pxa2xx-platform-objs             := spi-pxa2xx.
+ obj-$(CONFIG_SPI_PXA2XX)              += spi-pxa2xx-platform.o
+ obj-$(CONFIG_SPI_PXA2XX_PCI)          += spi-pxa2xx-pci.o
+ obj-$(CONFIG_SPI_RB4XX)                       += spi-rb4xx.o
++obj-$(CONFIG_SPI_RB4XX_CPLD)          += spi-rb4xx-cpld.o
+ obj-$(CONFIG_SPI_QUP)                 += spi-qup.o
+ obj-$(CONFIG_SPI_ROCKCHIP)            += spi-rockchip.o
+ obj-$(CONFIG_SPI_RB4XX)                       += spi-rb4xx.o
diff --git a/target/linux/ar71xx/patches-4.9/435-spi-vsc7385_driver.patch b/target/linux/ar71xx/patches-4.9/435-spi-vsc7385_driver.patch
new file mode 100644 (file)
index 0000000..f9f1f7a
--- /dev/null
@@ -0,0 +1,24 @@
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -768,6 +768,11 @@ config SPI_RB4XX_CPLD
+         SPI driver for the Xilinx CPLD chip present on the
+         MikroTik RB4xx boards.
++config SPI_VSC7385
++      tristate "Vitesse VSC7385 ethernet switch driver"
++      help
++        SPI driver for the Vitesse VSC7385 ethernet switch.
++
+ #
+ # Add new SPI protocol masters in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -99,6 +99,7 @@ spi-thunderx-objs                    := spi-cavium.o spi-
+ obj-$(CONFIG_SPI_THUNDERX)            += spi-thunderx.o
+ obj-$(CONFIG_SPI_TOPCLIFF_PCH)                += spi-topcliff-pch.o
+ obj-$(CONFIG_SPI_TXX9)                        += spi-txx9.o
++obj-$(CONFIG_SPI_VSC7385)             += spi-vsc7385.o
+ obj-$(CONFIG_SPI_XCOMM)               += spi-xcomm.o
+ obj-$(CONFIG_SPI_XILINX)              += spi-xilinx.o
+ obj-$(CONFIG_SPI_XLP)                 += spi-xlp.o
diff --git a/target/linux/ar71xx/patches-4.9/440-leds-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-4.9/440-leds-wndr3700-usb-led-driver.patch
new file mode 100644 (file)
index 0000000..0bf5b1a
--- /dev/null
@@ -0,0 +1,26 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -659,6 +659,13 @@ config LEDS_MLXCPLD
+         This option enabled support for the LEDs on the Mellanox
+         boards. Say Y to enabled these.
++config LEDS_WNDR3700_USB
++      tristate "NETGEAR WNDR3700 USB LED driver"
++      depends on LEDS_CLASS && ATH79_MACH_WNDR3700
++      help
++        This option enables support for the USB LED found on the
++        NETGEAR WNDR3700 board.
++
+ comment "LED Triggers"
+ source "drivers/leds/trigger/Kconfig"
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -48,6 +48,7 @@ obj-$(CONFIG_LEDS_DA9052)            += leds-da905
+ obj-$(CONFIG_LEDS_WM831X_STATUS)      += leds-wm831x-status.o
+ obj-$(CONFIG_LEDS_WM8350)             += leds-wm8350.o
+ obj-$(CONFIG_LEDS_PWM)                        += leds-pwm.o
++obj-${CONFIG_LEDS_WNDR3700_USB}               += leds-wndr3700-usb.o
+ obj-$(CONFIG_LEDS_REGULATOR)          += leds-regulator.o
+ obj-$(CONFIG_LEDS_INTEL_SS4200)               += leds-ss4200.o
+ obj-$(CONFIG_LEDS_LT3593)             += leds-lt3593.o
diff --git a/target/linux/ar71xx/patches-4.9/441-leds-rb750-led-driver.patch b/target/linux/ar71xx/patches-4.9/441-leds-rb750-led-driver.patch
new file mode 100644 (file)
index 0000000..777a0df
--- /dev/null
@@ -0,0 +1,23 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -666,6 +666,10 @@ config LEDS_WNDR3700_USB
+         This option enables support for the USB LED found on the
+         NETGEAR WNDR3700 board.
++config LEDS_RB750
++      tristate "LED driver for the Mikrotik RouterBOARD 750"
++      depends on LEDS_CLASS && ATH79_MACH_RB750
++
+ comment "LED Triggers"
+ source "drivers/leds/trigger/Kconfig"
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -55,6 +55,7 @@ obj-$(CONFIG_LEDS_LT3593)            += leds-lt359
+ obj-$(CONFIG_LEDS_ADP5520)            += leds-adp5520.o
+ obj-$(CONFIG_LEDS_DELL_NETBOOKS)      += dell-led.o
+ obj-$(CONFIG_LEDS_MC13783)            += leds-mc13783.o
++obj-$(CONFIG_LEDS_RB750)              += leds-rb750.o
+ obj-$(CONFIG_LEDS_NS2)                        += leds-ns2.o
+ obj-$(CONFIG_LEDS_NETXBIG)            += leds-netxbig.o
+ obj-$(CONFIG_LEDS_ASIC3)              += leds-asic3.o
diff --git a/target/linux/ar71xx/patches-4.9/450-gpio-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-4.9/450-gpio-nxp-74hc153-gpio-chip-driver.patch
new file mode 100644 (file)
index 0000000..41cf75a
--- /dev/null
@@ -0,0 +1,25 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -1211,4 +1211,12 @@ config GPIO_VIPERBOARD
+ endmenu
++comment "Other GPIO expanders"
++
++config GPIO_NXP_74HC153
++      tristate "NXP 74HC153 Dual 4-input multiplexer"
++      help
++        Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
++        provides a GPIO interface supporting input mode only.
++
+ endif
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -83,6 +83,7 @@ obj-$(CONFIG_GPIO_MSIC)              += gpio-msic.o
+ obj-$(CONFIG_GPIO_MVEBU)        += gpio-mvebu.o
+ obj-$(CONFIG_GPIO_MXC)                += gpio-mxc.o
+ obj-$(CONFIG_GPIO_MXS)                += gpio-mxs.o
++obj-$(CONFIG_GPIO_NXP_74HC153)        += gpio-nxp-74hc153.o
+ obj-$(CONFIG_GPIO_OCTEON)     += gpio-octeon.o
+ obj-$(CONFIG_GPIO_OMAP)               += gpio-omap.o
+ obj-$(CONFIG_GPIO_PCA953X)    += gpio-pca953x.o
diff --git a/target/linux/ar71xx/patches-4.9/451-gpio-74x164-improve-platform-device-support.patch b/target/linux/ar71xx/patches-4.9/451-gpio-74x164-improve-platform-device-support.patch
new file mode 100644 (file)
index 0000000..d9cfa88
--- /dev/null
@@ -0,0 +1,117 @@
+--- a/drivers/gpio/gpio-74x164.c
++++ b/drivers/gpio/gpio-74x164.c
+@@ -12,6 +12,7 @@
+ #include <linux/init.h>
+ #include <linux/mutex.h>
+ #include <linux/spi/spi.h>
++#include <linux/spi/74x164.h>
+ #include <linux/gpio.h>
+ #include <linux/of_gpio.h>
+ #include <linux/slab.h>
+@@ -103,9 +104,16 @@ static int gen_74x164_direction_output(s
+ static int gen_74x164_probe(struct spi_device *spi)
+ {
+       struct gen_74x164_chip *chip;
++      struct gen_74x164_chip_platform_data *pdata = spi->dev.platform_data;
++      struct device_node *np = spi->dev.of_node;
+       u32 nregs;
+       int ret;
++      if (!np && !pdata) {
++              dev_err(&spi->dev, "No configuration data available.\n");
++              return -EINVAL;
++      }
++
+       /*
+        * bits_per_word cannot be configured in platform data
+        */
+@@ -115,17 +123,23 @@ static int gen_74x164_probe(struct spi_d
+       if (ret < 0)
+               return ret;
+-      if (of_property_read_u32(spi->dev.of_node, "registers-number",
+-                               &nregs)) {
+-              dev_err(&spi->dev,
+-                      "Missing registers-number property in the DT.\n");
+-              return -EINVAL;
+-      }
++      if (np) {
++              if (of_property_read_u32(np, "registers-number", &nregs)) {
++                      dev_err(&spi->dev,
++                              "Missing registers-number property in the DT.\n");
++                      return -EINVAL;
++              }
++      } else if (pdata) {
++              nregs = pdata->num_registers;
++      }
+       chip = devm_kzalloc(&spi->dev, sizeof(*chip) + nregs, GFP_KERNEL);
+       if (!chip)
+               return -ENOMEM;
++      if (pdata && pdata->init_data)
++              memcpy(chip->buffer, pdata->init_data, chip->registers);
++      
+       spi_set_drvdata(spi, chip);
+       chip->gpio_chip.label = spi->modalias;
+@@ -133,7 +147,11 @@ static int gen_74x164_probe(struct spi_d
+       chip->gpio_chip.get = gen_74x164_get_value;
+       chip->gpio_chip.set = gen_74x164_set_value;
+       chip->gpio_chip.set_multiple = gen_74x164_set_multiple;
+-      chip->gpio_chip.base = -1;
++      if (np)
++              chip->gpio_chip.base = -1;
++      else if (pdata)
++              chip->gpio_chip.base = pdata->base;
++
+       chip->registers = nregs;
+       chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers;
+@@ -170,17 +188,19 @@ static int gen_74x164_remove(struct spi_
+       return 0;
+ }
++#ifdef CONFIG_OF
+ static const struct of_device_id gen_74x164_dt_ids[] = {
+       { .compatible = "fairchild,74hc595" },
+       { .compatible = "nxp,74lvc594" },
+       {},
+ };
+ MODULE_DEVICE_TABLE(of, gen_74x164_dt_ids);
++#endif
+ static struct spi_driver gen_74x164_driver = {
+       .driver = {
+               .name           = "74x164",
+-              .of_match_table = gen_74x164_dt_ids,
++              .of_match_table = of_match_ptr(gen_74x164_dt_ids),
+       },
+       .probe          = gen_74x164_probe,
+       .remove         = gen_74x164_remove,
+--- /dev/null
++++ b/include/linux/spi/74x164.h
+@@ -0,0 +1,13 @@
++#ifndef LINUX_SPI_74X164_H
++#define LINUX_SPI_74X164_H
++
++struct gen_74x164_chip_platform_data {
++      /* number assigned to the first GPIO */
++      unsigned        base;
++      /* number of chained registers */
++      unsigned        num_registers;
++      /* address of a buffer containing initial data */
++      u8              *init_data;
++};
++
++#endif
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -1154,7 +1154,6 @@ menu "SPI GPIO expanders"
+ config GPIO_74X164
+       tristate "74x164 serial-in/parallel-out 8-bits shift register"
+-      depends on OF_GPIO
+       help
+         Driver for 74x164 compatible serial-in/parallel-out 8-outputs
+         shift registers. This driver can be used to provide access
diff --git a/target/linux/ar71xx/patches-4.9/452-gpio-add-gpio-latch-driver.patch b/target/linux/ar71xx/patches-4.9/452-gpio-add-gpio-latch-driver.patch
new file mode 100644 (file)
index 0000000..5ddf6de
--- /dev/null
@@ -0,0 +1,22 @@
+--- a/drivers/gpio/Kconfig
++++ b/drivers/gpio/Kconfig
+@@ -1218,4 +1218,9 @@ config GPIO_NXP_74HC153
+         Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
+         provides a GPIO interface supporting input mode only.
++config GPIO_LATCH
++      tristate "GPIO latch driver"
++      help
++        Say yes here to enable a GPIO latch driver.
++
+ endif
+--- a/drivers/gpio/Makefile
++++ b/drivers/gpio/Makefile
+@@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL)  += gpio-janz
+ obj-$(CONFIG_GPIO_KEMPLD)     += gpio-kempld.o
+ obj-$(CONFIG_ARCH_KS8695)     += gpio-ks8695.o
+ obj-$(CONFIG_GPIO_INTEL_MID)  += gpio-intel-mid.o
++obj-$(CONFIG_GPIO_LATCH)      += gpio-latch.o
+ obj-$(CONFIG_GPIO_LOONGSON)   += gpio-loongson.o
+ obj-$(CONFIG_GPIO_LP3943)     += gpio-lp3943.o
+ obj-$(CONFIG_GPIO_LPC18XX)    += gpio-lpc18xx.o
diff --git a/target/linux/ar71xx/patches-4.9/461-spi-ath79-add-fast-flash-read.patch b/target/linux/ar71xx/patches-4.9/461-spi-ath79-add-fast-flash-read.patch
new file mode 100644 (file)
index 0000000..0dc73a8
--- /dev/null
@@ -0,0 +1,54 @@
+--- a/drivers/spi/spi-ath79.c
++++ b/drivers/spi/spi-ath79.c
+@@ -102,9 +102,6 @@ static void ath79_spi_enable(struct ath7
+       /* save CTRL register */
+       sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL);
+       sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC);
+-
+-      /* TODO: setup speed? */
+-      ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
+ }
+ static void ath79_spi_disable(struct ath79_spi *sp)
+@@ -205,6 +202,33 @@ static u32 ath79_spi_txrx_mode0(struct s
+       return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
+ }
++static int ath79_spi_read_flash_data(struct spi_device *spi,
++                                   struct spi_flash_read_message *msg)
++{
++      struct ath79_spi *sp = ath79_spidev_to_sp(spi);
++
++      if (msg->addr_width > 3)
++              return -EOPNOTSUPP;
++
++      if (spi->chip_select || gpio_is_valid(spi->cs_gpio))
++              return -EOPNOTSUPP;
++
++      /* disable GPIO mode */
++      ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
++
++      memcpy_fromio(msg->buf, sp->base + msg->from, msg->len);
++
++      /* enable GPIO mode */
++      ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
++
++      /* restore IOC register */
++      ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
++
++      msg->retlen = msg->len;
++
++      return 0;
++}
++
+ static int ath79_spi_probe(struct platform_device *pdev)
+ {
+       struct spi_master *master;
+@@ -234,6 +258,7 @@ static int ath79_spi_probe(struct platfo
+               master->num_chipselect = pdata->num_chipselect;
+               master->cs_gpios = pdata->cs_gpios;
+       }
++      master->spi_flash_read = ath79_spi_read_flash_data;
+       sp->bitbang.master = master;
+       sp->bitbang.chipselect = ath79_spi_chipselect;
diff --git a/target/linux/ar71xx/patches-4.9/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ar71xx/patches-4.9/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
new file mode 100644 (file)
index 0000000..520c652
--- /dev/null
@@ -0,0 +1,111 @@
+--- /dev/null
++++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
+@@ -0,0 +1,37 @@
++/*
++ *  Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
++ *
++ *  This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
++ *      Copyright (C) 2003, 2004 Ralf Baechle
++ *
++ *  This program is free software; you can redistribute it and/or modify it
++ *  under the terms of the GNU General Public License version 2 as published
++ *  by the Free Software Foundation.
++ */
++
++#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
++#define __ASM_MACH_ATH79_MANGLE_PORT_H
++
++#ifdef CONFIG_PCI
++extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
++extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
++#else
++#define ath79_pci_swizzle_b(port) (port)
++#define ath79_pci_swizzle_w(port) (port)
++#endif
++
++#define __swizzle_addr_b(port)        ath79_pci_swizzle_b(port)
++#define __swizzle_addr_w(port)        ath79_pci_swizzle_w(port)
++#define __swizzle_addr_l(port)        (port)
++#define __swizzle_addr_q(port)        (port)
++
++# define ioswabb(a, x)           (x)
++# define __mem_ioswabb(a, x)     (x)
++# define ioswabw(a, x)           (x)
++# define __mem_ioswabw(a, x)     cpu_to_le16(x)
++# define ioswabl(a, x)           (x)
++# define __mem_ioswabl(a, x)     cpu_to_le32(x)
++# define ioswabq(a, x)           (x)
++# define __mem_ioswabq(a, x)     cpu_to_le64(x)
++
++#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -13,6 +13,7 @@
+  */
+ #include <linux/init.h>
++#include <linux/export.h>
+ #include <linux/pci.h>
+ #include <linux/resource.h>
+ #include <linux/platform_device.h>
+@@ -25,6 +26,9 @@ static int (*ath79_pci_plat_dev_init)(st
+ static const struct ath79_pci_irq *ath79_pci_irq_map __initdata;
+ static unsigned ath79_pci_nr_irqs __initdata;
++static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
++static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
++
+ static const struct ath79_pci_irq ar71xx_pci_irq_map[] __initconst = {
+       {
+               .slot   = 17,
+@@ -212,12 +216,50 @@ ath79_register_pci_ar724x(int id,
+       return pdev;
+ }
++static inline bool ar71xx_is_pci_addr(unsigned long port)
++{
++      unsigned long phys = CPHYSADDR(port);
++
++      return (phys >= AR71XX_PCI_MEM_BASE &&
++              phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
++}
++
++static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
++{
++      return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
++}
++
++static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
++{
++      return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
++}
++
++unsigned long ath79_pci_swizzle_b(unsigned long port)
++{
++      if (__ath79_pci_swizzle_b)
++              return __ath79_pci_swizzle_b(port);
++
++      return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_b);
++
++unsigned long ath79_pci_swizzle_w(unsigned long port)
++{
++      if (__ath79_pci_swizzle_w)
++              return __ath79_pci_swizzle_w(port);
++
++      return port;
++}
++EXPORT_SYMBOL(ath79_pci_swizzle_w);
++
+ int __init ath79_register_pci(void)
+ {
+       struct platform_device *pdev = NULL;
+       if (soc_is_ar71xx()) {
+               pdev = ath79_register_pci_ar71xx();
++              __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
++              __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
+       } else if (soc_is_ar724x()) {
+               pdev = ath79_register_pci_ar724x(-1,
+                                                AR724X_PCI_CFG_BASE,
diff --git a/target/linux/ar71xx/patches-4.9/490-usb-ehci-add-quirks-for-qca-socs.patch b/target/linux/ar71xx/patches-4.9/490-usb-ehci-add-quirks-for-qca-socs.patch
new file mode 100644 (file)
index 0000000..8a05adb
--- /dev/null
@@ -0,0 +1,103 @@
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -252,6 +252,37 @@ int ehci_reset(struct ehci_hcd *ehci)
+       command |= CMD_RESET;
+       dbg_cmd (ehci, "reset", command);
+       ehci_writel(ehci, command, &ehci->regs->command);
++
++      if (ehci->qca_force_host_mode) {
++              u32 usbmode;
++
++              udelay(1000);
++
++              usbmode = ehci_readl(ehci, &ehci->regs->usbmode);
++              usbmode |= USBMODE_CM_HC | (1 << 4);
++              ehci_writel(ehci, usbmode, &ehci->regs->usbmode);
++
++              ehci_dbg(ehci, "forced host mode, usbmode: %08x\n",
++                       ehci_readl(ehci, &ehci->regs->usbmode));
++      }
++
++      if (ehci->qca_force_16bit_ptw) {
++              u32 port_status;
++
++              udelay(1000);
++
++              /* enable 16-bit UTMI interface */
++              port_status = ehci_readl(ehci, &ehci->regs->port_status[0]);
++              port_status |= BIT(28);
++              ehci_writel(ehci, port_status, &ehci->regs->port_status[0]);
++
++              ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n",
++                       ehci_readl(ehci, &ehci->regs->port_status[0]));
++      }
++
++      if (ehci->reset_notifier)
++              ehci->reset_notifier(ehci_to_hcd(ehci));
++
+       ehci->rh_state = EHCI_RH_HALTED;
+       ehci->next_statechange = jiffies;
+       retval = ehci_handshake(ehci, &ehci->regs->command,
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -231,6 +231,10 @@ struct ehci_hcd {                 /* one per controlle
+       unsigned                need_oc_pp_cycle:1; /* MPC834X port power */
+       unsigned                imx28_write_fix:1; /* For Freescale i.MX28 */
+       unsigned                ignore_oc:1;
++      unsigned                qca_force_host_mode:1;
++      unsigned                qca_force_16bit_ptw:1; /* force 16 bit UTMI */
++
++      void (*reset_notifier)(struct usb_hcd *hcd);
+       /* required for usb32 quirk */
+       #define OHCI_CTRL_HCFS          (3 << 6)
+--- a/include/linux/usb/ehci_pdriver.h
++++ b/include/linux/usb/ehci_pdriver.h
+@@ -50,6 +50,8 @@ struct usb_ehci_pdata {
+       unsigned        reset_on_resume:1;
+       unsigned        dma_mask_64:1;
+       unsigned        ignore_oc:1;
++      unsigned        qca_force_host_mode:1;
++      unsigned        qca_force_16bit_ptw:1;
+       /* Turn on all power and clocks */
+       int (*power_on)(struct platform_device *pdev);
+@@ -59,6 +61,7 @@ struct usb_ehci_pdata {
+        * turn off everything else */
+       void (*power_suspend)(struct platform_device *pdev);
+       int (*pre_setup)(struct usb_hcd *hcd);
++      void (*reset_notifier)(struct platform_device *pdev);
+ };
+ #endif /* __USB_CORE_EHCI_PDRIVER_H */
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -52,6 +52,14 @@ struct ehci_platform_priv {
+ static const char hcd_name[] = "ehci-platform";
++static void ehci_platform_reset_notifier(struct usb_hcd *hcd)
++{
++      struct platform_device *pdev = to_platform_device(hcd->self.controller);
++      struct usb_ehci_pdata *pdata = pdev->dev.platform_data;
++
++      pdata->reset_notifier(pdev);
++}
++
+ static int ehci_platform_reset(struct usb_hcd *hcd)
+ {
+       struct platform_device *pdev = to_platform_device(hcd->self.controller);
+@@ -261,6 +269,13 @@ static int ehci_platform_probe(struct pl
+               priv->reset_on_resume = true;
+       if (pdata->ignore_oc)
+               ehci->ignore_oc = 1;
++      if (pdata->qca_force_host_mode)
++              ehci->qca_force_host_mode = 1;
++      if (pdata->qca_force_16bit_ptw)
++              ehci->qca_force_16bit_ptw = 1;
++
++      if (pdata->reset_notifier)
++              ehci->reset_notifier = ehci_platform_reset_notifier;
+ #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+       if (ehci->big_endian_mmio) {
diff --git a/target/linux/ar71xx/patches-4.9/500-MIPS-fw-myloader.patch b/target/linux/ar71xx/patches-4.9/500-MIPS-fw-myloader.patch
new file mode 100644 (file)
index 0000000..bcb1937
--- /dev/null
@@ -0,0 +1,22 @@
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -213,6 +213,7 @@ cflags-$(toolchain-virt)           += -DTOOLCHAIN
+ #
+ libs-$(CONFIG_FW_ARC)         += arch/mips/fw/arc/
+ libs-$(CONFIG_FW_CFE)         += arch/mips/fw/cfe/
++libs-$(CONFIG_MYLOADER)               += arch/mips/fw/myloader/
+ libs-$(CONFIG_FW_SNIPROM)     += arch/mips/fw/sni/
+ libs-y                                += arch/mips/fw/lib/
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -1144,6 +1144,9 @@ config MIPS_MSC
+ config MIPS_NILE4
+       bool
++config MYLOADER
++      bool
++
+ config SYNC_R4K
+       bool
diff --git a/target/linux/ar71xx/patches-4.9/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch b/target/linux/ar71xx/patches-4.9/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch
new file mode 100644 (file)
index 0000000..12ab3b5
--- /dev/null
@@ -0,0 +1,70 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -15,6 +15,7 @@
+ #include <linux/init.h>
+ #include <linux/delay.h>
+ #include <linux/irq.h>
++#include <linux/etherdevice.h>
+ #include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
+@@ -22,6 +23,7 @@
+ #include <asm/mach-ath79/ar71xx_regs.h>
+ #include "dev-wmac.h"
++static u8 ath79_wmac_mac[ETH_ALEN];
+ static struct ath9k_platform_data ath79_wmac_data;
+ static struct resource ath79_wmac_resources[] = {
+@@ -161,7 +163,7 @@ static void qca955x_wmac_setup(void)
+               ath79_wmac_data.is_clk_25mhz = true;
+ }
+-void __init ath79_register_wmac(u8 *cal_data)
++void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+       if (soc_is_ar913x())
+               ar913x_wmac_setup();
+@@ -178,5 +180,10 @@ void __init ath79_register_wmac(u8 *cal_
+               memcpy(ath79_wmac_data.eeprom_data, cal_data,
+                      sizeof(ath79_wmac_data.eeprom_data));
++      if (mac_addr) {
++              memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac));
++              ath79_wmac_data.macaddr = ath79_wmac_mac;
++      }
++
+       platform_device_register(&ath79_wmac_device);
+ }
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -12,6 +12,6 @@
+ #ifndef _ATH79_DEV_WMAC_H
+ #define _ATH79_DEV_WMAC_H
+-void ath79_register_wmac(u8 *cal_data);
++void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
+ #endif /* _ATH79_DEV_WMAC_H */
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -128,7 +128,7 @@ static void __init db120_setup(void)
+       ath79_register_spi(&db120_spi_data, db120_spi_info,
+                          ARRAY_SIZE(db120_spi_info));
+       ath79_register_usb();
+-      ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
++      ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
+       db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
+ }
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -85,7 +85,7 @@ static void __init ap121_setup(void)
+       ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+                          ARRAY_SIZE(ap121_spi_info));
+       ath79_register_usb();
+-      ath79_register_wmac(cal_data);
++      ath79_register_wmac(cal_data, NULL);
+ }
+ MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
diff --git a/target/linux/ar71xx/patches-4.9/504-MIPS-ath79-add-ath79_device_reset_get.patch b/target/linux/ar71xx/patches-4.9/504-MIPS-ath79-add-ath79_device_reset_get.patch
new file mode 100644 (file)
index 0000000..c0e96b2
--- /dev/null
@@ -0,0 +1,42 @@
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -145,6 +145,7 @@ static inline u32 ath79_reset_rr(unsigne
+ void ath79_device_reset_set(u32 mask);
+ void ath79_device_reset_clear(u32 mask);
++u32 ath79_device_reset_get(u32 mask);
+ void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3);
+ void ath79_misc_irq_init(void __iomem *regs, int irq,
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -142,3 +142,29 @@ void ath79_device_reset_clear(u32 mask)
+       spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
+ }
+ EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
++
++u32 ath79_device_reset_get(u32 mask)
++{
++      unsigned long flags;
++      u32 reg;
++      u32 ret;
++
++      if (soc_is_ar71xx())
++              reg = AR71XX_RESET_REG_RESET_MODULE;
++      else if (soc_is_ar724x())
++              reg = AR724X_RESET_REG_RESET_MODULE;
++      else if (soc_is_ar913x())
++              reg = AR913X_RESET_REG_RESET_MODULE;
++      else if (soc_is_ar933x())
++              reg = AR933X_RESET_REG_RESET_MODULE;
++      else if (soc_is_ar934x())
++              reg = AR934X_RESET_REG_RESET_MODULE;
++      else
++              BUG();
++
++      spin_lock_irqsave(&ath79_device_reset_lock, flags);
++      ret = ath79_reset_rr(reg);
++      spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
++      return ret;
++}
++EXPORT_SYMBOL_GPL(ath79_device_reset_get);
diff --git a/target/linux/ar71xx/patches-4.9/505-MIPS-ath79-add-ath79_gpio_function_select.patch b/target/linux/ar71xx/patches-4.9/505-MIPS-ath79-add-ath79_gpio_function_select.patch
new file mode 100644 (file)
index 0000000..278e781
--- /dev/null
@@ -0,0 +1,39 @@
+--- a/arch/mips/ath79/common.h
++++ b/arch/mips/ath79/common.h
+@@ -27,6 +27,7 @@ void ath79_ddr_ctrl_init(void);
+ void ath79_gpio_function_enable(u32 mask);
+ void ath79_gpio_function_disable(u32 mask);
+ void ath79_gpio_function_setup(u32 set, u32 clear);
++void ath79_gpio_output_select(unsigned gpio, u8 val);
+ void ath79_gpio_init(void);
+ #endif /* __ATH79_COMMON_H */
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -57,3 +57,26 @@ void ath79_gpio_function_disable(u32 mas
+ {
+       ath79_gpio_function_setup(0, mask);
+ }
++
++void __init ath79_gpio_output_select(unsigned gpio, u8 val)
++{
++      void __iomem *base = ath79_gpio_base;
++      unsigned int reg;
++      u32 t, s;
++
++      BUG_ON(!soc_is_ar934x());
++
++      if (gpio >= AR934X_GPIO_COUNT)
++              return;
++
++      reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4);
++      s = 8 * (gpio % 4);
++
++      t = __raw_readl(base + reg);
++      t &= ~(0xff << s);
++      t |= val << s;
++      __raw_writel(t, base + reg);
++
++      /* flush write */
++      (void) __raw_readl(base + reg);
++}
diff --git a/target/linux/ar71xx/patches-4.9/506-MIPS-ath79-prom-parse-redboot-args.patch b/target/linux/ar71xx/patches-4.9/506-MIPS-ath79-prom-parse-redboot-args.patch
new file mode 100644 (file)
index 0000000..46beeff
--- /dev/null
@@ -0,0 +1,42 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -22,10 +22,39 @@
+ #include "common.h"
++static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata;
++
++static void __init ath79_prom_append_cmdline(const char *name,
++                                            const char *value)
++{
++      snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf),
++               " %s=%s", name, value);
++      strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
++}
++
+ void __init prom_init(void)
+ {
++      const char *env;
++
+       fw_init_cmdline();
++      env = fw_getenv("ethaddr");
++      if (env)
++              ath79_prom_append_cmdline("ethaddr", env);
++
++      env = fw_getenv("board");
++      if (env) {
++              /* Workaround for buggy bootloaders */
++              if (strcmp(env, "RouterStation") == 0 ||
++                  strcmp(env, "Ubiquiti AR71xx-based board") == 0)
++                      env = "UBNT-RS";
++
++              if (strcmp(env, "RouterStation PRO") == 0)
++                      env = "UBNT-RSPRO";
++
++              ath79_prom_append_cmdline("board", env);
++      }
++
+ #ifdef CONFIG_BLK_DEV_INITRD
+       /* Read the initrd address from the firmware environment */
+       initrd_start = fw_getenvl("initrd_start");
diff --git a/target/linux/ar71xx/patches-4.9/507-MIPS-ath79-prom-add-myloader-support.patch b/target/linux/ar71xx/patches-4.9/507-MIPS-ath79-prom-add-myloader-support.patch
new file mode 100644 (file)
index 0000000..17a9733
--- /dev/null
@@ -0,0 +1,55 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -19,6 +19,7 @@
+ #include <asm/bootinfo.h>
+ #include <asm/addrspace.h>
+ #include <asm/fw/fw.h>
++#include <asm/fw/myloader/myloader.h>
+ #include "common.h"
+@@ -32,10 +33,44 @@ static void __init ath79_prom_append_cmd
+       strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
+ }
++static int __init ath79_prom_init_myloader(void)
++{
++      struct myloader_info *mylo;
++      char mac_buf[32];
++      unsigned char *mac;
++
++      mylo = myloader_get_info();
++      if (!mylo)
++              return 0;
++
++      switch (mylo->did) {
++      case DEVID_COMPEX_WP543:
++              ath79_prom_append_cmdline("board", "WP543");
++              break;
++      case DEVID_COMPEX_WPE72:
++              ath79_prom_append_cmdline("board", "WPE72");
++              break;
++      default:
++              pr_warn("prom: unknown device id: %x\n", mylo->did);
++              return 0;
++      }
++
++      mac = mylo->macs[0];
++      snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x",
++               mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
++
++      ath79_prom_append_cmdline("ethaddr", mac_buf);
++
++      return 1;
++}
++
+ void __init prom_init(void)
+ {
+       const char *env;
++      if (ath79_prom_init_myloader())
++              return;
++
+       fw_init_cmdline();
+       env = fw_getenv("ethaddr");
diff --git a/target/linux/ar71xx/patches-4.9/508-MIPS-ath79-prom-image-command-line-hack.patch b/target/linux/ar71xx/patches-4.9/508-MIPS-ath79-prom-image-command-line-hack.patch
new file mode 100644 (file)
index 0000000..cfa5e72
--- /dev/null
@@ -0,0 +1,73 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -33,6 +33,41 @@ static void __init ath79_prom_append_cmd
+       strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
+ }
++#ifdef CONFIG_IMAGE_CMDLINE_HACK
++extern char __image_cmdline[];
++
++static int __init ath79_use_image_cmdline(void)
++{
++      char *p = __image_cmdline;
++      int replace = 0;
++
++      if (*p == '-') {
++              replace = 1;
++              p++;
++      }
++
++      if (*p == '\0')
++              return 0;
++
++      if (replace) {
++              strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
++      } else {
++              strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
++              strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
++      }
++
++      /* Validate and setup environment pointer */
++      if (fw_arg2 < CKSEG0)
++              _fw_envp = NULL;
++      else
++              _fw_envp = (int *)fw_arg2;
++
++      return 1;
++}
++#else
++static inline int ath79_use_image_cmdline(void) { return 0; }
++#endif
++
+ static int __init ath79_prom_init_myloader(void)
+ {
+       struct myloader_info *mylo;
+@@ -61,6 +96,8 @@ static int __init ath79_prom_init_myload
+       ath79_prom_append_cmdline("ethaddr", mac_buf);
++      ath79_use_image_cmdline();
++
+       return 1;
+ }
+@@ -71,7 +108,8 @@ void __init prom_init(void)
+       if (ath79_prom_init_myloader())
+               return;
+-      fw_init_cmdline();
++      if (!ath79_use_image_cmdline())
++              fw_init_cmdline();
+       env = fw_getenv("ethaddr");
+       if (env)
+--- a/arch/mips/fw/lib/cmdline.c
++++ b/arch/mips/fw/lib/cmdline.c
+@@ -35,6 +35,7 @@ void __init fw_init_cmdline(void)
+       else
+               _fw_envp = (int *)fw_arg2;
++      arcs_cmdline[0] = '\0';
+       for (i = 1; i < fw_argc; i++) {
+               strlcat(arcs_cmdline, fw_argv(i), COMMAND_LINE_SIZE);
+               if (i < (fw_argc - 1))
diff --git a/target/linux/ar71xx/patches-4.9/509-MIPS-ath79-process-board-kernel-option.patch b/target/linux/ar71xx/patches-4.9/509-MIPS-ath79-process-board-kernel-option.patch
new file mode 100644 (file)
index 0000000..3091ab6
--- /dev/null
@@ -0,0 +1,11 @@
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -283,6 +283,8 @@ void __init plat_time_init(void)
+       mips_hpt_frequency = cpu_clk_rate / 2;
+ }
++__setup("board=", mips_machtype_setup);
++
+ static int __init ath79_setup(void)
+ {
+       if  (mips_machtype == ATH79_MACH_GENERIC_OF)
diff --git a/target/linux/ar71xx/patches-4.9/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch b/target/linux/ar71xx/patches-4.9/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch
new file mode 100644 (file)
index 0000000..2d2235e
--- /dev/null
@@ -0,0 +1,14 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -24,7 +24,10 @@
+ #include "dev-wmac.h"
+ static u8 ath79_wmac_mac[ETH_ALEN];
+-static struct ath9k_platform_data ath79_wmac_data;
++
++static struct ath9k_platform_data ath79_wmac_data = {
++      .led_pin = -1,
++};
+ static struct resource ath79_wmac_resources[] = {
+       {
diff --git a/target/linux/ar71xx/patches-4.9/520-MIPS-ath79-enable-UART-function.patch b/target/linux/ar71xx/patches-4.9/520-MIPS-ath79-enable-UART-function.patch
new file mode 100644 (file)
index 0000000..c8649b7
--- /dev/null
@@ -0,0 +1,18 @@
+--- a/arch/mips/ath79/dev-common.c
++++ b/arch/mips/ath79/dev-common.c
+@@ -81,6 +81,15 @@ void __init ath79_register_uart(void)
+       uart_clk_rate = ath79_get_sys_clk_rate("uart");
++      if (soc_is_ar71xx())
++              ath79_gpio_function_enable(AR71XX_GPIO_FUNC_UART_EN);
++      else if (soc_is_ar724x())
++              ath79_gpio_function_enable(AR724X_GPIO_FUNC_UART_EN);
++      else if (soc_is_ar913x())
++              ath79_gpio_function_enable(AR913X_GPIO_FUNC_UART_EN);
++      else if (soc_is_ar933x())
++              ath79_gpio_function_enable(AR933X_GPIO_FUNC_UART_EN);
++
+       if (soc_is_ar71xx() ||
+           soc_is_ar724x() ||
+           soc_is_ar913x() ||
diff --git a/target/linux/ar71xx/patches-4.9/521-MIPS-ath79-enable-UART-for-early_serial.patch b/target/linux/ar71xx/patches-4.9/521-MIPS-ath79-enable-UART-for-early_serial.patch
new file mode 100644 (file)
index 0000000..e546ff2
--- /dev/null
@@ -0,0 +1,61 @@
+--- a/arch/mips/ath79/early_printk.c
++++ b/arch/mips/ath79/early_printk.c
+@@ -58,6 +58,46 @@ static void prom_putchar_dummy(unsigned
+       /* nothing to do */
+ }
++static void prom_enable_uart(u32 id)
++{
++      void __iomem *gpio_base;
++      u32 uart_en;
++      u32 t;
++
++      switch (id) {
++      case REV_ID_MAJOR_AR71XX:
++              uart_en = AR71XX_GPIO_FUNC_UART_EN;
++              break;
++
++      case REV_ID_MAJOR_AR7240:
++      case REV_ID_MAJOR_AR7241:
++      case REV_ID_MAJOR_AR7242:
++              uart_en = AR724X_GPIO_FUNC_UART_EN;
++              break;
++
++      case REV_ID_MAJOR_AR913X:
++              uart_en = AR913X_GPIO_FUNC_UART_EN;
++              break;
++
++      case REV_ID_MAJOR_AR9330:
++      case REV_ID_MAJOR_AR9331:
++              uart_en = AR933X_GPIO_FUNC_UART_EN;
++              break;
++
++      case REV_ID_MAJOR_AR9341:
++      case REV_ID_MAJOR_AR9342:
++      case REV_ID_MAJOR_AR9344:
++              /* TODO */
++      default:
++              return;
++      }
++
++      gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE));
++      t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC);
++      t |= uart_en;
++      __raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC);
++}
++
+ static void prom_putchar_init(void)
+ {
+       void __iomem *base;
+@@ -88,8 +128,10 @@ static void prom_putchar_init(void)
+       default:
+               _prom_putchar = prom_putchar_dummy;
+-              break;
++              return;
+       }
++
++      prom_enable_uart(id);
+ }
+ void prom_putchar(unsigned char ch)
diff --git a/target/linux/ar71xx/patches-4.9/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch b/target/linux/ar71xx/patches-4.9/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch
new file mode 100644 (file)
index 0000000..2d5559c
--- /dev/null
@@ -0,0 +1,21 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -190,3 +190,9 @@ void __init ath79_register_wmac(u8 *cal_
+       platform_device_register(&ath79_wmac_device);
+ }
++
++void __init ath79_register_wmac_simple(void)
++{
++      ath79_register_wmac(NULL, NULL);
++      ath79_wmac_data.eeprom_name = "soc_wmac.eeprom";
++}
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -13,5 +13,6 @@
+ #define _ATH79_DEV_WMAC_H
+ void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
++void ath79_register_wmac_simple(void);
+ #endif /* _ATH79_DEV_WMAC_H */
diff --git a/target/linux/ar71xx/patches-4.9/523-MIPS-ath79-OTP-support.patch b/target/linux/ar71xx/patches-4.9/523-MIPS-ath79-OTP-support.patch
new file mode 100644 (file)
index 0000000..d11d418
--- /dev/null
@@ -0,0 +1,192 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -166,6 +166,149 @@ static void qca955x_wmac_setup(void)
+               ath79_wmac_data.is_clk_25mhz = true;
+ }
++#define AR93XX_WMAC_SIZE \
++      (soc_is_ar934x() ? AR934X_WMAC_SIZE : AR933X_WMAC_SIZE)
++#define AR93XX_WMAC_BASE \
++      (soc_is_ar934x() ? AR934X_WMAC_BASE : AR933X_WMAC_BASE)
++
++#define AR93XX_OTP_BASE \
++      (soc_is_ar934x() ? AR934X_OTP_BASE : AR9300_OTP_BASE)
++#define AR93XX_OTP_STATUS \
++      (soc_is_ar934x() ? AR934X_OTP_STATUS : AR9300_OTP_STATUS)
++#define AR93XX_OTP_READ_DATA \
++      (soc_is_ar934x() ? AR934X_OTP_READ_DATA : AR9300_OTP_READ_DATA)
++
++static bool __init
++ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
++{
++      int timeout = 1000;
++      u32 val;
++
++      __raw_readl(base + AR93XX_OTP_BASE + (4 * addr));
++      while (timeout--) {
++              val = __raw_readl(base + AR93XX_OTP_STATUS);
++              if ((val & AR9300_OTP_STATUS_TYPE) == AR9300_OTP_STATUS_VALID)
++                      break;
++
++              udelay(10);
++      }
++
++      if (!timeout)
++              return false;
++
++      *data = __raw_readl(base + AR93XX_OTP_READ_DATA);
++      return true;
++}
++
++static bool __init
++ar93xx_wmac_otp_read(void __iomem *base, int addr, u8 *dest, int len)
++{
++      u32 data;
++      int i;
++
++      for (i = 0; i < len; i++) {
++              int offset = 8 * ((addr - i) % 4);
++
++              if (!ar93xx_wmac_otp_read_word(base, (addr - i) / 4, &data))
++                      return false;
++
++              dest[i] = (data >> offset) & 0xff;
++      }
++
++      return true;
++}
++
++static bool __init
++ar93xx_wmac_otp_uncompress(void __iomem *base, int addr, int len, u8 *dest,
++                         int dest_start, int dest_len)
++{
++      int dest_bytes = 0;
++      int offset = 0;
++      int end = addr - len;
++      u8 hdr[2];
++
++      while (addr > end) {
++              if (!ar93xx_wmac_otp_read(base, addr, hdr, 2))
++                      return false;
++
++              addr -= 2;
++              offset += hdr[0];
++
++              if (offset <= dest_start + dest_len &&
++                  offset + len >= dest_start) {
++                      int data_offset = 0;
++                      int dest_offset = 0;
++                      int copy_len;
++
++                      if (offset < dest_start)
++                              data_offset = dest_start - offset;
++                      else
++                              dest_offset = offset - dest_start;
++
++                      copy_len = len - data_offset;
++                      if (copy_len > dest_len - dest_offset)
++                              copy_len = dest_len - dest_offset;
++
++                      ar93xx_wmac_otp_read(base, addr - data_offset,
++                                           dest + dest_offset,
++                                           copy_len);
++
++                      dest_bytes += copy_len;
++              }
++              addr -= hdr[1];
++      }
++      return !!dest_bytes;
++}
++
++bool __init ar93xx_wmac_read_mac_address(u8 *dest)
++{
++      void __iomem *base;
++      bool ret = false;
++      int addr = 0x1ff;
++      unsigned int len;
++      u32 hdr_u32;
++      u8 *hdr = (u8 *) &hdr_u32;
++      u8 mac[6] = { 0x00, 0x02, 0x03, 0x04, 0x05, 0x06 };
++      int mac_start = 2, mac_end = 8;
++
++      BUG_ON(!soc_is_ar933x() && !soc_is_ar934x());
++      base = ioremap_nocache(AR93XX_WMAC_BASE, AR93XX_WMAC_SIZE);
++      while (addr > sizeof(hdr_u32)) {
++              if (!ar93xx_wmac_otp_read(base, addr, hdr, sizeof(hdr_u32)))
++                      break;
++
++              if (hdr_u32 == 0 || hdr_u32 == ~0)
++                      break;
++
++              len = (hdr[1] << 4) | (hdr[2] >> 4);
++              addr -= 4;
++
++              switch (hdr[0] >> 5) {
++              case 0:
++                      if (len < mac_end)
++                              break;
++
++                      ar93xx_wmac_otp_read(base, addr - mac_start, mac, 6);
++                      ret = true;
++                      break;
++              case 3:
++                      ret |= ar93xx_wmac_otp_uncompress(base, addr, len, mac,
++                                                        mac_start, 6);
++                      break;
++              default:
++                      break;
++              }
++
++              addr -= len + 2;
++      }
++
++      iounmap(base);
++      if (ret)
++              memcpy(dest, mac, 6);
++
++      return ret;
++}
++
+ void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+       if (soc_is_ar913x())
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -14,5 +14,6 @@
+ void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
+ void ath79_register_wmac_simple(void);
++bool ar93xx_wmac_read_mac_address(u8 *dest);
+ #endif /* _ATH79_DEV_WMAC_H */
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -112,6 +112,14 @@
+ #define QCA955X_EHCI1_BASE    0x1b400000
+ #define QCA955X_EHCI_SIZE     0x1000
++#define AR9300_OTP_BASE               0x14000
++#define AR9300_OTP_STATUS     0x15f18
++#define AR9300_OTP_STATUS_TYPE                0x7
++#define AR9300_OTP_STATUS_VALID               0x4
++#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2
++#define AR9300_OTP_STATUS_SM_BUSY     0x1
++#define AR9300_OTP_READ_DATA  0x15f1c
++
+ /*
+  * DDR_CTRL block
+  */
+@@ -149,6 +157,13 @@
+ #define AR934X_DDR_REG_FLUSH_PCIE     0xa8
+ #define AR934X_DDR_REG_FLUSH_WMAC     0xac
++#define AR934X_OTP_BASE                                       0x30000
++#define AR934X_OTP_STATUS                             0x31018
++#define AR934X_OTP_READ_DATA                          0x3101c
++#define AR934X_OTP_INTF2_ADDRESS                      0x31008
++#define AR934X_OTP_INTF3_ADDRESS                      0x3100c
++#define AR934X_OTP_PGENB_SETUP_HOLD_TIME_ADDRESS      0x31034
++
+ /*
+  * PLL block
+  */
diff --git a/target/linux/ar71xx/patches-4.9/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch b/target/linux/ar71xx/patches-4.9/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch
new file mode 100644 (file)
index 0000000..91e037e
--- /dev/null
@@ -0,0 +1,31 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -309,6 +309,16 @@ bool __init ar93xx_wmac_read_mac_address
+       return ret;
+ }
++void __init ath79_wmac_disable_2ghz(void)
++{
++      ath79_wmac_data.disable_2ghz = true;
++}
++
++void __init ath79_wmac_disable_5ghz(void)
++{
++      ath79_wmac_data.disable_5ghz = true;
++}
++
+ void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+       if (soc_is_ar913x())
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -14,6 +14,9 @@
+ void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
+ void ath79_register_wmac_simple(void);
++void ath79_wmac_disable_2ghz(void);
++void ath79_wmac_disable_5ghz(void);
++
+ bool ar93xx_wmac_read_mac_address(u8 *dest);
+ #endif /* _ATH79_DEV_WMAC_H */
diff --git a/target/linux/ar71xx/patches-4.9/525-MIPS-ath79-enable-qca-usb-quirks.patch b/target/linux/ar71xx/patches-4.9/525-MIPS-ath79-enable-qca-usb-quirks.patch
new file mode 100644 (file)
index 0000000..0e33674
--- /dev/null
@@ -0,0 +1,101 @@
+--- a/arch/mips/ath79/dev-usb.c
++++ b/arch/mips/ath79/dev-usb.c
+@@ -37,6 +37,8 @@ static struct usb_ehci_pdata ath79_ehci_
+ static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
+       .caps_offset            = 0x100,
+       .has_tt                 = 1,
++      .qca_force_host_mode    = 1,
++      .qca_force_16bit_ptw    = 1,
+ };
+ static void __init ath79_usb_register(const char *name, int id,
+@@ -159,6 +161,9 @@ static void __init ar913x_usb_setup(void
+       ath79_device_reset_clear(AR913X_RESET_USB_PHY);
+       mdelay(10);
++      ath79_ehci_pdata_v2.qca_force_host_mode = 0;
++      ath79_ehci_pdata_v2.qca_force_16bit_ptw = 0;
++
+       ath79_usb_register("ehci-platform", -1,
+                          AR913X_EHCI_BASE, AR913X_EHCI_SIZE,
+                          ATH79_CPU_IRQ(3),
+@@ -182,14 +187,34 @@ static void __init ar933x_usb_setup(void
+                          &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+ }
+-static void __init ar934x_usb_setup(void)
++static void enable_tx_tx_idp_violation_fix(unsigned base)
+ {
+-      u32 bootstrap;
++      void __iomem *phy_reg;
++      u32 t;
++
++      phy_reg = ioremap(base, 4);
++      if (!phy_reg)
++              return;
++
++      t = ioread32(phy_reg);
++      t &= ~0xff;
++      t |= 0x58;
++      iowrite32(t, phy_reg);
++
++      iounmap(phy_reg);
++}
+-      bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
+-      if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
++static void ar934x_usb_reset_notifier(struct platform_device *pdev)
++{
++      if (pdev->id != -1)
+               return;
++      enable_tx_tx_idp_violation_fix(0x18116c94);
++      dev_info(&pdev->dev, "TX-TX IDP fix enabled\n");
++}
++
++static void __init ar934x_usb_setup(void)
++{
+       ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
+       udelay(1000);
+@@ -202,14 +227,40 @@ static void __init ar934x_usb_setup(void
+       ath79_device_reset_clear(AR934X_RESET_USB_HOST);
+       udelay(1000);
++      if (ath79_soc_rev >= 3)
++              ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier;
++
+       ath79_usb_register("ehci-platform", -1,
+                          AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
+                          ATH79_CPU_IRQ(3),
+                          &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+ }
++static void qca955x_usb_reset_notifier(struct platform_device *pdev)
++{
++      u32 base;
++
++      switch (pdev->id) {
++      case 0:
++              base = 0x18116c94;
++              break;
++
++      case 1:
++              base = 0x18116e54;
++              break;
++
++      default:
++              return;
++      }
++
++      enable_tx_tx_idp_violation_fix(base);
++      dev_info(&pdev->dev, "TX-TX IDP fix enabled\n");
++}
++
+ static void __init qca955x_usb_setup(void)
+ {
++      ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier;
++
+       ath79_usb_register("ehci-platform", 0,
+                          QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
+                          ATH79_IP3_IRQ(0),
diff --git a/target/linux/ar71xx/patches-4.9/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-4.9/601-MIPS-ath79-add-more-register-defines.patch
new file mode 100644 (file)
index 0000000..d0f5b78
--- /dev/null
@@ -0,0 +1,455 @@
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -20,6 +20,10 @@
+ #include <linux/bitops.h>
+ #define AR71XX_APB_BASE               0x18000000
++#define AR71XX_GE0_BASE               0x19000000
++#define AR71XX_GE0_SIZE               0x10000
++#define AR71XX_GE1_BASE               0x1a000000
++#define AR71XX_GE1_SIZE               0x10000
+ #define AR71XX_EHCI_BASE      0x1b000000
+ #define AR71XX_EHCI_SIZE      0x1000
+ #define AR71XX_OHCI_BASE      0x1c000000
+@@ -39,6 +43,8 @@
+ #define AR71XX_PLL_SIZE               0x100
+ #define AR71XX_RESET_BASE     (AR71XX_APB_BASE + 0x00060000)
+ #define AR71XX_RESET_SIZE     0x100
++#define AR71XX_MII_BASE               (AR71XX_APB_BASE + 0x00070000)
++#define AR71XX_MII_SIZE               0x100
+ #define AR71XX_PCI_MEM_BASE   0x10000000
+ #define AR71XX_PCI_MEM_SIZE   0x07000000
+@@ -81,15 +87,21 @@
+ #define AR933X_UART_BASE      (AR71XX_APB_BASE + 0x00020000)
+ #define AR933X_UART_SIZE      0x14
++#define AR933X_GMAC_BASE      (AR71XX_APB_BASE + 0x00070000)
++#define AR933X_GMAC_SIZE      0x04
+ #define AR933X_WMAC_BASE      (AR71XX_APB_BASE + 0x00100000)
+ #define AR933X_WMAC_SIZE      0x20000
+ #define AR933X_EHCI_BASE      0x1b000000
+ #define AR933X_EHCI_SIZE      0x1000
++#define AR934X_GMAC_BASE      (AR71XX_APB_BASE + 0x00070000)
++#define AR934X_GMAC_SIZE      0x14
+ #define AR934X_WMAC_BASE      (AR71XX_APB_BASE + 0x00100000)
+ #define AR934X_WMAC_SIZE      0x20000
+ #define AR934X_EHCI_BASE      0x1b000000
+ #define AR934X_EHCI_SIZE      0x200
++#define AR934X_NFC_BASE               0x1b000200
++#define AR934X_NFC_SIZE               0xb8
+ #define AR934X_SRIF_BASE      (AR71XX_APB_BASE + 0x00116000)
+ #define AR934X_SRIF_SIZE      0x1000
+@@ -106,11 +118,15 @@
+ #define QCA955X_PCI_CTRL_BASE1        (AR71XX_APB_BASE + 0x00280000)
+ #define QCA955X_PCI_CTRL_SIZE 0x100
++#define QCA955X_GMAC_BASE     (AR71XX_APB_BASE + 0x00070000)
++#define QCA955X_GMAC_SIZE     0x40
+ #define QCA955X_WMAC_BASE     (AR71XX_APB_BASE + 0x00100000)
+ #define QCA955X_WMAC_SIZE     0x20000
+ #define QCA955X_EHCI0_BASE    0x1b000000
+ #define QCA955X_EHCI1_BASE    0x1b400000
+ #define QCA955X_EHCI_SIZE     0x1000
++#define QCA955X_NFC_BASE      0x1b800200
++#define QCA955X_NFC_SIZE      0xb8
+ #define AR9300_OTP_BASE               0x14000
+ #define AR9300_OTP_STATUS     0x15f18
+@@ -181,6 +197,9 @@
+ #define AR71XX_AHB_DIV_SHIFT          20
+ #define AR71XX_AHB_DIV_MASK           0x7
++#define AR71XX_ETH0_PLL_SHIFT         17
++#define AR71XX_ETH1_PLL_SHIFT         19
++
+ #define AR724X_PLL_REG_CPU_CONFIG     0x00
+ #define AR724X_PLL_REG_PCIE_CONFIG    0x10
+@@ -196,6 +215,8 @@
+ #define AR724X_DDR_DIV_SHIFT          22
+ #define AR724X_DDR_DIV_MASK           0x3
++#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c
++
+ #define AR913X_PLL_REG_CPU_CONFIG     0x00
+ #define AR913X_PLL_REG_ETH_CONFIG     0x04
+ #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
+@@ -208,6 +229,9 @@
+ #define AR913X_AHB_DIV_SHIFT          19
+ #define AR913X_AHB_DIV_MASK           0x1
++#define AR913X_ETH0_PLL_SHIFT         20
++#define AR913X_ETH1_PLL_SHIFT         22
++
+ #define AR933X_PLL_CPU_CONFIG_REG     0x00
+ #define AR933X_PLL_CLOCK_CTRL_REG     0x08
+@@ -229,6 +253,8 @@
+ #define AR934X_PLL_CPU_CONFIG_REG             0x00
+ #define AR934X_PLL_DDR_CONFIG_REG             0x04
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG               0x08
++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG   0x24
++#define AR934X_PLL_ETH_XMII_CONTROL_REG               0x2c
+ #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT     0
+ #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK      0x3f
+@@ -261,9 +287,13 @@
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL        BIT(21)
+ #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL        BIT(24)
++#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL  BIT(6)
++
+ #define QCA955X_PLL_CPU_CONFIG_REG            0x00
+ #define QCA955X_PLL_DDR_CONFIG_REG            0x04
+ #define QCA955X_PLL_CLK_CTRL_REG              0x08
++#define QCA955X_PLL_ETH_XMII_CONTROL_REG      0x28
++#define QCA955X_PLL_ETH_SGMII_CONTROL_REG     0x48
+ #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT    0
+ #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK     0x3f
+@@ -388,16 +418,83 @@
+ #define AR913X_RESET_USB_HOST         BIT(5)
+ #define AR913X_RESET_USB_PHY          BIT(4)
++#define AR933X_RESET_GE1_MDIO         BIT(23)
++#define AR933X_RESET_GE0_MDIO         BIT(22)
++#define AR933X_RESET_GE1_MAC          BIT(13)
+ #define AR933X_RESET_WMAC             BIT(11)
++#define AR933X_RESET_GE0_MAC          BIT(9)
+ #define AR933X_RESET_USB_HOST         BIT(5)
+ #define AR933X_RESET_USB_PHY          BIT(4)
+ #define AR933X_RESET_USBSUS_OVERRIDE  BIT(3)
++#define AR934X_RESET_HOST             BIT(31)
++#define AR934X_RESET_SLIC             BIT(30)
++#define AR934X_RESET_HDMA             BIT(29)
++#define AR934X_RESET_EXTERNAL         BIT(28)
++#define AR934X_RESET_RTC              BIT(27)
++#define AR934X_RESET_PCIE_EP_INT      BIT(26)
++#define AR934X_RESET_CHKSUM_ACC               BIT(25)
++#define AR934X_RESET_FULL_CHIP                BIT(24)
++#define AR934X_RESET_GE1_MDIO         BIT(23)
++#define AR934X_RESET_GE0_MDIO         BIT(22)
++#define AR934X_RESET_CPU_NMI          BIT(21)
++#define AR934X_RESET_CPU_COLD         BIT(20)
++#define AR934X_RESET_HOST_RESET_INT   BIT(19)
++#define AR934X_RESET_PCIE_EP          BIT(18)
++#define AR934X_RESET_UART1            BIT(17)
++#define AR934X_RESET_DDR              BIT(16)
++#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
++#define AR934X_RESET_NANDF            BIT(14)
++#define AR934X_RESET_GE1_MAC          BIT(13)
++#define AR934X_RESET_ETH_SWITCH_ANALOG        BIT(12)
+ #define AR934X_RESET_USB_PHY_ANALOG   BIT(11)
++#define AR934X_RESET_HOST_DMA_INT     BIT(10)
++#define AR934X_RESET_GE0_MAC          BIT(9)
++#define AR934X_RESET_ETH_SWITCH               BIT(8)
++#define AR934X_RESET_PCIE_PHY         BIT(7)
++#define AR934X_RESET_PCIE             BIT(6)
+ #define AR934X_RESET_USB_HOST         BIT(5)
+ #define AR934X_RESET_USB_PHY          BIT(4)
+ #define AR934X_RESET_USBSUS_OVERRIDE  BIT(3)
++#define AR934X_RESET_LUT              BIT(2)
++#define AR934X_RESET_MBOX             BIT(1)
++#define AR934X_RESET_I2S              BIT(0)
++
++#define QCA955X_RESET_HOST            BIT(31)
++#define QCA955X_RESET_SLIC            BIT(30)
++#define QCA955X_RESET_HDMA            BIT(29)
++#define QCA955X_RESET_EXTERNAL                BIT(28)
++#define QCA955X_RESET_RTC             BIT(27)
++#define QCA955X_RESET_PCIE_EP_INT     BIT(26)
++#define QCA955X_RESET_CHKSUM_ACC      BIT(25)
++#define QCA955X_RESET_FULL_CHIP               BIT(24)
++#define QCA955X_RESET_GE1_MDIO                BIT(23)
++#define QCA955X_RESET_GE0_MDIO                BIT(22)
++#define QCA955X_RESET_CPU_NMI         BIT(21)
++#define QCA955X_RESET_CPU_COLD                BIT(20)
++#define QCA955X_RESET_HOST_RESET_INT  BIT(19)
++#define QCA955X_RESET_PCIE_EP         BIT(18)
++#define QCA955X_RESET_UART1           BIT(17)
++#define QCA955X_RESET_DDR             BIT(16)
++#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
++#define QCA955X_RESET_NANDF           BIT(14)
++#define QCA955X_RESET_GE1_MAC         BIT(13)
++#define QCA955X_RESET_SGMII_ANALOG    BIT(12)
++#define QCA955X_RESET_USB_PHY_ANALOG  BIT(11)
++#define QCA955X_RESET_HOST_DMA_INT    BIT(10)
++#define QCA955X_RESET_GE0_MAC         BIT(9)
++#define QCA955X_RESET_SGMII           BIT(8)
++#define QCA955X_RESET_PCIE_PHY                BIT(7)
++#define QCA955X_RESET_PCIE            BIT(6)
++#define QCA955X_RESET_USB_HOST                BIT(5)
++#define QCA955X_RESET_USB_PHY         BIT(4)
++#define QCA955X_RESET_USBSUS_OVERRIDE BIT(3)
++#define QCA955X_RESET_LUT             BIT(2)
++#define QCA955X_RESET_MBOX            BIT(1)
++#define QCA955X_RESET_I2S             BIT(0)
++#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
++#define AR933X_BOOTSTRAP_EEPBUSY      BIT(4)
+ #define AR933X_BOOTSTRAP_REF_CLK_40   BIT(0)
+ #define AR934X_BOOTSTRAP_SW_OPTION8   BIT(23)
+@@ -539,8 +636,22 @@
+ #define AR71XX_GPIO_REG_INT_ENABLE    0x24
+ #define AR71XX_GPIO_REG_FUNC          0x28
++#define AR934X_GPIO_REG_OUT_FUNC0     0x2c
++#define AR934X_GPIO_REG_OUT_FUNC1     0x30
++#define AR934X_GPIO_REG_OUT_FUNC2     0x34
++#define AR934X_GPIO_REG_OUT_FUNC3     0x38
++#define AR934X_GPIO_REG_OUT_FUNC4     0x3c
++#define AR934X_GPIO_REG_OUT_FUNC5     0x40
+ #define AR934X_GPIO_REG_FUNC          0x6c
++#define QCA955X_GPIO_REG_OUT_FUNC0    0x2c
++#define QCA955X_GPIO_REG_OUT_FUNC1    0x30
++#define QCA955X_GPIO_REG_OUT_FUNC2    0x34
++#define QCA955X_GPIO_REG_OUT_FUNC3    0x38
++#define QCA955X_GPIO_REG_OUT_FUNC4    0x3c
++#define QCA955X_GPIO_REG_OUT_FUNC5    0x40
++#define QCA955X_GPIO_REG_FUNC         0x6c
++
+ #define AR71XX_GPIO_COUNT             16
+ #define AR7240_GPIO_COUNT             18
+ #define AR7241_GPIO_COUNT             20
+@@ -570,4 +681,235 @@
+ #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT        13
+ #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
++#define AR71XX_GPIO_FUNC_STEREO_EN            BIT(17)
++#define AR71XX_GPIO_FUNC_SLIC_EN              BIT(16)
++#define AR71XX_GPIO_FUNC_SPI_CS2_EN           BIT(13)
++#define AR71XX_GPIO_FUNC_SPI_CS1_EN           BIT(12)
++#define AR71XX_GPIO_FUNC_UART_EN              BIT(8)
++#define AR71XX_GPIO_FUNC_USB_OC_EN            BIT(4)
++#define AR71XX_GPIO_FUNC_USB_CLK_EN           BIT(0)
++
++#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN               BIT(19)
++#define AR724X_GPIO_FUNC_SPI_EN                       BIT(18)
++#define AR724X_GPIO_FUNC_SPI_CS_EN2           BIT(14)
++#define AR724X_GPIO_FUNC_SPI_CS_EN1           BIT(13)
++#define AR724X_GPIO_FUNC_CLK_OBS5_EN          BIT(12)
++#define AR724X_GPIO_FUNC_CLK_OBS4_EN          BIT(11)
++#define AR724X_GPIO_FUNC_CLK_OBS3_EN          BIT(10)
++#define AR724X_GPIO_FUNC_CLK_OBS2_EN          BIT(9)
++#define AR724X_GPIO_FUNC_CLK_OBS1_EN          BIT(8)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN   BIT(7)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN   BIT(6)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN   BIT(5)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN   BIT(4)
++#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN   BIT(3)
++#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN      BIT(2)
++#define AR724X_GPIO_FUNC_UART_EN              BIT(1)
++#define AR724X_GPIO_FUNC_JTAG_DISABLE         BIT(0)
++
++#define AR913X_GPIO_FUNC_WMAC_LED_EN          BIT(22)
++#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN               BIT(21)
++#define AR913X_GPIO_FUNC_I2S_REFCLKEN         BIT(20)
++#define AR913X_GPIO_FUNC_I2S_MCKEN            BIT(19)
++#define AR913X_GPIO_FUNC_I2S1_EN              BIT(18)
++#define AR913X_GPIO_FUNC_I2S0_EN              BIT(17)
++#define AR913X_GPIO_FUNC_SLIC_EN              BIT(16)
++#define AR913X_GPIO_FUNC_UART_RTSCTS_EN               BIT(9)
++#define AR913X_GPIO_FUNC_UART_EN              BIT(8)
++#define AR913X_GPIO_FUNC_USB_CLK_EN           BIT(4)
++
++#define AR933X_GPIO_FUNC_SPDIF2TCK            BIT(31)
++#define AR933X_GPIO_FUNC_SPDIF_EN             BIT(30)
++#define AR933X_GPIO_FUNC_I2SO_22_18_EN                BIT(29)
++#define AR933X_GPIO_FUNC_I2S_MCK_EN           BIT(27)
++#define AR933X_GPIO_FUNC_I2SO_EN              BIT(26)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL  BIT(25)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL  BIT(24)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT   BIT(23)
++#define AR933X_GPIO_FUNC_SPI_EN                       BIT(18)
++#define AR933X_GPIO_FUNC_SPI_CS_EN2           BIT(14)
++#define AR933X_GPIO_FUNC_SPI_CS_EN1           BIT(13)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN   BIT(7)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN   BIT(6)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN   BIT(5)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN   BIT(4)
++#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN   BIT(3)
++#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN      BIT(2)
++#define AR933X_GPIO_FUNC_UART_EN              BIT(1)
++#define AR933X_GPIO_FUNC_JTAG_DISABLE         BIT(0)
++
++#define AR934X_GPIO_FUNC_CLK_OBS7_EN          BIT(9)
++#define AR934X_GPIO_FUNC_CLK_OBS6_EN          BIT(8)
++#define AR934X_GPIO_FUNC_CLK_OBS5_EN          BIT(7)
++#define AR934X_GPIO_FUNC_CLK_OBS4_EN          BIT(6)
++#define AR934X_GPIO_FUNC_CLK_OBS3_EN          BIT(5)
++#define AR934X_GPIO_FUNC_CLK_OBS2_EN          BIT(4)
++#define AR934X_GPIO_FUNC_CLK_OBS1_EN          BIT(3)
++#define AR934X_GPIO_FUNC_CLK_OBS0_EN          BIT(2)
++#define AR934X_GPIO_FUNC_JTAG_DISABLE         BIT(1)
++
++#define AR934X_GPIO_OUT_GPIO          0
++#define AR934X_GPIO_OUT_SPI_CS1       7
++#define AR934X_GPIO_OUT_LED_LINK0     41
++#define AR934X_GPIO_OUT_LED_LINK1     42
++#define AR934X_GPIO_OUT_LED_LINK2     43
++#define AR934X_GPIO_OUT_LED_LINK3     44
++#define AR934X_GPIO_OUT_LED_LINK4     45
++#define AR934X_GPIO_OUT_EXT_LNA0      46
++#define AR934X_GPIO_OUT_EXT_LNA1      47
++
++#define QCA955X_GPIO_FUNC_CLK_OBS7_EN         BIT(9)
++#define QCA955X_GPIO_FUNC_CLK_OBS6_EN         BIT(8)
++#define QCA955X_GPIO_FUNC_CLK_OBS5_EN         BIT(7)
++#define QCA955X_GPIO_FUNC_CLK_OBS4_EN         BIT(6)
++#define QCA955X_GPIO_FUNC_CLK_OBS3_EN         BIT(5)
++#define QCA955X_GPIO_FUNC_CLK_OBS2_EN         BIT(4)
++#define QCA955X_GPIO_FUNC_CLK_OBS1_EN         BIT(3)
++#define QCA955X_GPIO_FUNC_JTAG_DISABLE                BIT(1)
++
++#define QCA955X_GPIO_OUT_GPIO         0
++#define QCA955X_MII_EXT_MDI           1
++#define QCA955X_SLIC_DATA_OUT         3
++#define QCA955X_SLIC_PCM_FS           4
++#define QCA955X_SLIC_PCM_CLK          5
++#define QCA955X_SPI_CLK                       8
++#define QCA955X_SPI_CS_0              9
++#define QCA955X_SPI_CS_1              10
++#define QCA955X_SPI_CS_2              11
++#define QCA955X_SPI_MISO              12
++#define QCA955X_I2S_CLK                       13
++#define QCA955X_I2S_WS                        14
++#define QCA955X_I2S_SD                        15
++#define QCA955X_I2S_MCK                       16
++#define QCA955X_SPDIF_OUT             17
++#define QCA955X_UART1_TD              18
++#define QCA955X_UART1_RTS             19
++#define QCA955X_UART1_RD              20
++#define QCA955X_UART1_CTS             21
++#define QCA955X_UART0_SOUT            22
++#define QCA955X_SPDIF2_OUT            23
++#define QCA955X_LED_SGMII_SPEED0      24
++#define QCA955X_LED_SGMII_SPEED1      25
++#define QCA955X_LED_SGMII_DUPLEX      26
++#define QCA955X_LED_SGMII_LINK_UP     27
++#define QCA955X_SGMII_SPEED0_INVERT   28
++#define QCA955X_SGMII_SPEED1_INVERT   29
++#define QCA955X_SGMII_DUPLEX_INVERT   30
++#define QCA955X_SGMII_LINK_UP_INVERT  31
++#define QCA955X_GE1_MII_MDO           32
++#define QCA955X_GE1_MII_MDC           33
++#define QCA955X_SWCOM2                        38
++#define QCA955X_SWCOM3                        39
++#define QCA955X_MAC2_GPIO             40
++#define QCA955X_MAC3_GPIO             41
++#define QCA955X_ATT_LED                       42
++#define QCA955X_PWR_LED                       43
++#define QCA955X_TX_FRAME              44
++#define QCA955X_RX_CLEAR_EXTERNAL     45
++#define QCA955X_LED_NETWORK_EN                46
++#define QCA955X_LED_POWER_EN          47
++#define QCA955X_WMAC_GLUE_WOW         68
++#define QCA955X_RX_CLEAR_EXTENSION    70
++#define QCA955X_CP_NAND_CS1           73
++#define QCA955X_USB_SUSPEND           74
++#define QCA955X_ETH_TX_ERR            75
++#define QCA955X_DDR_DQ_OE             76
++#define QCA955X_CLKREQ_N_EP           77
++#define QCA955X_CLKREQ_N_RC           78
++#define QCA955X_CLK_OBS0              79
++#define QCA955X_CLK_OBS1              80
++#define QCA955X_CLK_OBS2              81
++#define QCA955X_CLK_OBS3              82
++#define QCA955X_CLK_OBS4              83
++#define QCA955X_CLK_OBS5              84
++
++/*
++ * MII_CTRL block
++ */
++#define AR71XX_MII_REG_MII0_CTRL      0x00
++#define AR71XX_MII_REG_MII1_CTRL      0x04
++
++#define AR71XX_MII_CTRL_IF_MASK               3
++#define AR71XX_MII_CTRL_SPEED_SHIFT   4
++#define AR71XX_MII_CTRL_SPEED_MASK    3
++#define AR71XX_MII_CTRL_SPEED_10      0
++#define AR71XX_MII_CTRL_SPEED_100     1
++#define AR71XX_MII_CTRL_SPEED_1000    2
++
++#define AR71XX_MII0_CTRL_IF_GMII      0
++#define AR71XX_MII0_CTRL_IF_MII               1
++#define AR71XX_MII0_CTRL_IF_RGMII     2
++#define AR71XX_MII0_CTRL_IF_RMII      3
++
++#define AR71XX_MII1_CTRL_IF_RGMII     0
++#define AR71XX_MII1_CTRL_IF_RMII      1
++
++/*
++ * AR933X GMAC interface
++ */
++#define AR933X_GMAC_REG_ETH_CFG               0x00
++
++#define AR933X_ETH_CFG_RGMII_GE0      BIT(0)
++#define AR933X_ETH_CFG_MII_GE0                BIT(1)
++#define AR933X_ETH_CFG_GMII_GE0               BIT(2)
++#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3)
++#define AR933X_ETH_CFG_MII_GE0_SLAVE  BIT(4)
++#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5)
++#define AR933X_ETH_CFG_SW_PHY_SWAP    BIT(7)
++#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP       BIT(8)
++#define AR933X_ETH_CFG_RMII_GE0               BIT(9)
++#define AR933X_ETH_CFG_RMII_GE0_SPD_10        0
++#define AR933X_ETH_CFG_RMII_GE0_SPD_100       BIT(10)
++
++/*
++ * AR934X GMAC Interface
++ */
++#define AR934X_GMAC_REG_ETH_CFG               0x00
++
++#define AR934X_ETH_CFG_RGMII_GMAC0    BIT(0)
++#define AR934X_ETH_CFG_MII_GMAC0      BIT(1)
++#define AR934X_ETH_CFG_GMII_GMAC0     BIT(2)
++#define AR934X_ETH_CFG_MII_GMAC0_MASTER       BIT(3)
++#define AR934X_ETH_CFG_MII_GMAC0_SLAVE        BIT(4)
++#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN       BIT(5)
++#define AR934X_ETH_CFG_SW_ONLY_MODE   BIT(6)
++#define AR934X_ETH_CFG_SW_PHY_SWAP    BIT(7)
++#define AR934X_ETH_CFG_SW_APB_ACCESS  BIT(9)
++#define AR934X_ETH_CFG_RMII_GMAC0     BIT(10)
++#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11)
++#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
++#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST       BIT(13)
++#define AR934X_ETH_CFG_RXD_DELAY        BIT(14)
++#define AR934X_ETH_CFG_RXD_DELAY_MASK   0x3
++#define AR934X_ETH_CFG_RXD_DELAY_SHIFT  14
++#define AR934X_ETH_CFG_RDV_DELAY        BIT(16)
++#define AR934X_ETH_CFG_RDV_DELAY_MASK   0x3
++#define AR934X_ETH_CFG_RDV_DELAY_SHIFT  16
++
++/*
++ * QCA955X GMAC Interface
++ */
++
++#define QCA955X_GMAC_REG_ETH_CFG      0x00
++
++#define QCA955X_ETH_CFG_RGMII_EN      BIT(0)
++#define QCA955X_ETH_CFG_MII_GE0               BIT(1)
++#define QCA955X_ETH_CFG_GMII_GE0      BIT(2)
++#define QCA955X_ETH_CFG_MII_GE0_MASTER        BIT(3)
++#define QCA955X_ETH_CFG_MII_GE0_SLAVE BIT(4)
++#define QCA955X_ETH_CFG_GE0_ERR_EN    BIT(5)
++#define QCA955X_ETH_CFG_GE0_SGMII     BIT(6)
++#define QCA955X_ETH_CFG_RMII_GE0      BIT(10)
++#define QCA955X_ETH_CFG_MII_CNTL_SPEED        BIT(11)
++#define QCA955X_ETH_CFG_RMII_GE0_MASTER       BIT(12)
++#define QCA955X_ETH_CFG_RXD_DELAY_MASK        0x3
++#define QCA955X_ETH_CFG_RXD_DELAY_SHIFT       14
++#define QCA955X_ETH_CFG_RDV_DELAY     BIT(16)
++#define QCA955X_ETH_CFG_RDV_DELAY_MASK        0x3
++#define QCA955X_ETH_CFG_RDV_DELAY_SHIFT       16
++#define QCA955X_ETH_CFG_TXD_DELAY_MASK        0x3
++#define QCA955X_ETH_CFG_TXD_DELAY_SHIFT       18
++#define QCA955X_ETH_CFG_TXE_DELAY_MASK        0x3
++#define QCA955X_ETH_CFG_TXE_DELAY_SHIFT       20
++
+ #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ar71xx/patches-4.9/602-MIPS-ath79-add-openwrt-stuff.patch b/target/linux/ar71xx/patches-4.9/602-MIPS-ath79-add-openwrt-stuff.patch
new file mode 100644 (file)
index 0000000..cbd69e3
--- /dev/null
@@ -0,0 +1,49 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -98,6 +98,20 @@ config SOC_QCA955X
+       select PCI_AR724X if PCI
+       def_bool n
++config ATH79_DEV_M25P80
++      select ATH79_DEV_SPI
++      def_bool n
++
++config ATH79_DEV_AP9X_PCI
++      select ATH79_PCI_ATH9K_FIXUP
++      def_bool n
++
++config ATH79_DEV_DSA
++      def_bool n
++
++config ATH79_DEV_ETH
++      def_bool n
++
+ config PCI_AR724X
+       def_bool n
+@@ -107,6 +121,10 @@ config ATH79_DEV_GPIO_BUTTONS
+ config ATH79_DEV_LEDS_GPIO
+       def_bool n
++config ATH79_DEV_NFC
++      depends on (SOC_AR934X || SOC_QCA955X)
++      def_bool n
++
+ config ATH79_DEV_SPI
+       def_bool n
+@@ -117,4 +135,14 @@ config ATH79_DEV_WMAC
+       depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
+       def_bool n
++config ATH79_NVRAM
++      def_bool n
++
++config ATH79_PCI_ATH9K_FIXUP
++      def_bool n
++
++config ATH79_ROUTERBOOT
++      select LZO_DECOMPRESS
++      def_bool n
++
+ endif
diff --git a/target/linux/ar71xx/patches-4.9/603-MIPS-ath79-ap121-fixes.patch b/target/linux/ar71xx/patches-4.9/603-MIPS-ath79-ap121-fixes.patch
new file mode 100644 (file)
index 0000000..773a858
--- /dev/null
@@ -0,0 +1,149 @@
+--- a/arch/mips/ath79/mach-ap121.c
++++ b/arch/mips/ath79/mach-ap121.c
+@@ -1,19 +1,21 @@
+ /*
+  *  Atheros AP121 board support
+  *
+- *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
++ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+  *
+  *  This program is free software; you can redistribute it and/or modify it
+  *  under the terms of the GNU General Public License version 2 as published
+  *  by the Free Software Foundation.
+  */
+-#include "machtypes.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
++#include "machtypes.h"
+ #define AP121_GPIO_LED_WLAN           0
+ #define AP121_GPIO_LED_USB            1
+@@ -24,7 +26,14 @@
+ #define AP121_KEYS_POLL_INTERVAL      20      /* msecs */
+ #define AP121_KEYS_DEBOUNCE_INTERVAL  (3 * AP121_KEYS_POLL_INTERVAL)
+-#define AP121_CAL_DATA_ADDR   0x1fff1000
++#define AP121_MAC0_OFFSET             0x0000
++#define AP121_MAC1_OFFSET             0x0006
++#define AP121_CALDATA_OFFSET          0x1000
++#define AP121_WMAC_MAC_OFFSET         0x1002
++
++#define AP121_MINI_GPIO_LED_WLAN      0
++#define AP121_MINI_GPIO_BTN_JUMPSTART 12
++#define AP121_MINI_GPIO_BTN_RESET     11
+ static struct gpio_led ap121_leds_gpio[] __initdata = {
+       {
+@@ -58,35 +67,78 @@ static struct gpio_keys_button ap121_gpi
+       }
+ };
+-static struct spi_board_info ap121_spi_info[] = {
++static struct gpio_led ap121_mini_leds_gpio[] __initdata = {
+       {
+-              .bus_num        = 0,
+-              .chip_select    = 0,
+-              .max_speed_hz   = 25000000,
+-              .modalias       = "mx25l1606e",
+-      }
++              .name           = "ap121:green:wlan",
++              .gpio           = AP121_MINI_GPIO_LED_WLAN,
++              .active_low     = 0,
++      },
+ };
+-static struct ath79_spi_platform_data ap121_spi_data = {
+-      .bus_num        = 0,
+-      .num_chipselect = 1,
++static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = {
++      {
++              .desc           = "jumpstart button",
++              .type           = EV_KEY,
++              .code           = KEY_WPS_BUTTON,
++              .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++              .gpio           = AP121_MINI_GPIO_BTN_JUMPSTART,
++              .active_low     = 1,
++      },
++      {
++              .desc           = "reset button",
++              .type           = EV_KEY,
++              .code           = KEY_RESTART,
++              .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
++              .gpio           = AP121_MINI_GPIO_BTN_RESET,
++              .active_low     = 1,
++      }
+ };
++static void __init ap121_common_setup(void)
++{
++      u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++      ath79_register_m25p80(NULL);
++      ath79_register_wmac(art + AP121_CALDATA_OFFSET,
++                          art + AP121_WMAC_MAC_OFFSET);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0);
++      ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0);
++
++      ath79_register_mdio(0, 0x0);
++
++      /* LAN ports */
++      ath79_register_eth(1);
++
++      /* WAN port */
++      ath79_register_eth(0);
++}
++
+ static void __init ap121_setup(void)
+ {
+-      u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
++      ap121_common_setup();
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
+                                ap121_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(ap121_gpio_keys),
+                                       ap121_gpio_keys);
+-
+-      ath79_register_spi(&ap121_spi_data, ap121_spi_info,
+-                         ARRAY_SIZE(ap121_spi_info));
+       ath79_register_usb();
+-      ath79_register_wmac(cal_data, NULL);
+ }
+ MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
+            ap121_setup);
++
++static void __init ap121_mini_setup(void)
++{
++      ap121_common_setup();
++
++      ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio),
++                               ap121_mini_leds_gpio);
++      ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
++                                      ARRAY_SIZE(ap121_mini_gpio_keys),
++                                      ap121_mini_gpio_keys);
++}
++
++MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI",
++           ap121_mini_setup);
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -5,9 +5,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi
+ config ATH79_MACH_AP121
+       bool "Atheros AP121 reference board"
+       select SOC_AR933X
++      select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+-      select ATH79_DEV_SPI
++      select ATH79_DEV_M25P80
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       help
diff --git a/target/linux/ar71xx/patches-4.9/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-4.9/605-MIPS-ath79-db120-fixes.patch
new file mode 100644 (file)
index 0000000..1029d43
--- /dev/null
@@ -0,0 +1,204 @@
+--- a/arch/mips/ath79/mach-db120.c
++++ b/arch/mips/ath79/mach-db120.c
+@@ -2,7 +2,7 @@
+  * Atheros DB120 reference board support
+  *
+  * Copyright (c) 2011 Qualcomm Atheros
+- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
++ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+  *
+  * Permission to use, copy, modify, and/or distribute this software for any
+  * purpose with or without fee is hereby granted, provided that the above
+@@ -19,16 +19,26 @@
+  */
+ #include <linux/pci.h>
++#include <linux/phy.h>
++#include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/ar8216_platform.h>
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "dev-ap9x-pci.h"
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
++#include "dev-m25p80.h"
++#include "dev-nfc.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
+-#include "pci.h"
++#include "machtypes.h"
++#define DB120_GPIO_LED_USB            11
+ #define DB120_GPIO_LED_WLAN_5G                12
+ #define DB120_GPIO_LED_WLAN_2G                13
+ #define DB120_GPIO_LED_STATUS         14
+@@ -39,8 +49,10 @@
+ #define DB120_KEYS_POLL_INTERVAL      20      /* msecs */
+ #define DB120_KEYS_DEBOUNCE_INTERVAL  (3 * DB120_KEYS_POLL_INTERVAL)
+-#define DB120_WMAC_CALDATA_OFFSET 0x1000
+-#define DB120_PCIE_CALDATA_OFFSET 0x5000
++#define DB120_MAC0_OFFSET             0
++#define DB120_MAC1_OFFSET             6
++#define DB120_WMAC_CALDATA_OFFSET     0x1000
++#define DB120_PCIE_CALDATA_OFFSET     0x5000
+ static struct gpio_led db120_leds_gpio[] __initdata = {
+       {
+@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[]
+               .gpio           = DB120_GPIO_LED_WLAN_2G,
+               .active_low     = 1,
+       },
++      {
++              .name           = "db120:green:usb",
++              .gpio           = DB120_GPIO_LED_USB,
++              .active_low     = 1,
++      }
+ };
+ static struct gpio_keys_button db120_gpio_keys[] __initdata = {
+@@ -76,60 +93,85 @@ static struct gpio_keys_button db120_gpi
+       },
+ };
+-static struct spi_board_info db120_spi_info[] = {
+-      {
+-              .bus_num        = 0,
+-              .chip_select    = 0,
+-              .max_speed_hz   = 25000000,
+-              .modalias       = "s25sl064a",
+-      }
++static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
++      .mode = AR8327_PAD_MAC_RGMII,
++      .txclk_delay_en = true,
++      .rxclk_delay_en = true,
++      .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
++      .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+ };
+-static struct ath79_spi_platform_data db120_spi_data = {
+-      .bus_num        = 0,
+-      .num_chipselect = 1,
++static struct ar8327_led_cfg db120_ar8327_led_cfg = {
++      .led_ctrl0 = 0x00000000,
++      .led_ctrl1 = 0xc737c737,
++      .led_ctrl2 = 0x00000000,
++      .led_ctrl3 = 0x00c30c00,
++      .open_drain = true,
+ };
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data db120_ath9k_data;
+-
+-static int db120_pci_plat_dev_init(struct pci_dev *dev)
+-{
+-      switch (PCI_SLOT(dev->devfn)) {
+-      case 0:
+-              dev->dev.platform_data = &db120_ath9k_data;
+-              break;
+-      }
+-
+-      return 0;
+-}
+-
+-static void __init db120_pci_init(u8 *eeprom)
+-{
+-      memcpy(db120_ath9k_data.eeprom_data, eeprom,
+-             sizeof(db120_ath9k_data.eeprom_data));
++static struct ar8327_platform_data db120_ar8327_data = {
++      .pad0_cfg = &db120_ar8327_pad0_cfg,
++      .port0_cfg = {
++              .force_link = 1,
++              .speed = AR8327_PORT_SPEED_1000,
++              .duplex = 1,
++              .txpause = 1,
++              .rxpause = 1,
++      },
++      .led_cfg = &db120_ar8327_led_cfg,
++};
+-      ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
+-      ath79_register_pci();
+-}
+-#else
+-static inline void db120_pci_init(u8 *eeprom) {}
+-#endif /* CONFIG_PCI */
++static struct mdio_board_info db120_mdio0_info[] = {
++      {
++              .bus_id = "ag71xx-mdio.0",
++              .phy_addr = 0,
++              .platform_data = &db120_ar8327_data,
++      },
++};
+ static void __init db120_setup(void)
+ {
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++      ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
++      ath79_register_m25p80(NULL);
++
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
+                                db120_leds_gpio);
+       ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(db120_gpio_keys),
+                                       db120_gpio_keys);
+-      ath79_register_spi(&db120_spi_data, db120_spi_info,
+-                         ARRAY_SIZE(db120_spi_info));
+       ath79_register_usb();
+       ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
+-      db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
++      ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
++
++      ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
++                                 AR934X_ETH_CFG_SW_ONLY_MODE);
++
++      ath79_register_mdio(1, 0x0);
++      ath79_register_mdio(0, 0x0);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
++
++      mdiobus_register_board_info(db120_mdio0_info,
++                                  ARRAY_SIZE(db120_mdio0_info));
++
++      /* GMAC0 is connected to an AR8327 switch */
++      ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++      ath79_eth0_data.phy_mask = BIT(0);
++      ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++      ath79_eth0_pll_data.pll_1000 = 0x06000000;
++      ath79_register_eth(0);
++
++      /* GMAC1 is connected to the internal switch */
++      ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
++      ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
++      ath79_eth1_data.speed = SPEED_1000;
++      ath79_eth1_data.duplex = DUPLEX_FULL;
++
++      ath79_register_eth(1);
++
++      ath79_register_nfc();
+ }
+ MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -42,9 +42,12 @@ config ATH79_MACH_AP81
+ config ATH79_MACH_DB120
+       bool "Atheros DB120 reference board"
+       select SOC_AR934X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+-      select ATH79_DEV_SPI
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_NFC
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       help
diff --git a/target/linux/ar71xx/patches-4.9/606-MIPS-ath79-pb44-fixes.patch b/target/linux/ar71xx/patches-4.9/606-MIPS-ath79-pb44-fixes.patch
new file mode 100644 (file)
index 0000000..f2943d0
--- /dev/null
@@ -0,0 +1,146 @@
+--- a/arch/mips/ath79/mach-pb44.c
++++ b/arch/mips/ath79/mach-pb44.c
+@@ -8,23 +8,48 @@
+  *  by the Free Software Foundation.
+  */
++#include <linux/delay.h>
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
+ #include <linux/i2c.h>
+ #include <linux/i2c-gpio.h>
+ #include <linux/i2c/pcf857x.h>
++#include <linux/i2c/pcf857x.h>
++#include <linux/spi/flash.h>
++#include <linux/spi/vsc7385.h>
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++#include <asm/mach-ath79/ath79.h>
++
++#include "dev-eth.h"
+ #include "dev-gpio-buttons.h"
+ #include "dev-leds-gpio.h"
+ #include "dev-spi.h"
+ #include "dev-usb.h"
++#include "machtypes.h"
+ #include "pci.h"
+ #define PB44_GPIO_I2C_SCL     0
+ #define PB44_GPIO_I2C_SDA     1
++#define PB44_PCF8757_VSC7395_CS       0
++#define PB44_PCF8757_STEREO_CS        1
++#define PB44_PCF8757_SLIC_CS0 2
++#define PB44_PCF8757_SLIC_TEST        3
++#define PB44_PCF8757_SLIC_INT0        4
++#define PB44_PCF8757_SLIC_INT1        5
++#define PB44_PCF8757_SW_RESET 6
++#define PB44_PCF8757_SW_JUMP  8
++#define PB44_PCF8757_LED_JUMP1        9
++#define PB44_PCF8757_LED_JUMP2        10
++#define PB44_PCF8757_TP24     11
++#define PB44_PCF8757_TP25     12
++#define PB44_PCF8757_TP26     13
++#define PB44_PCF8757_TP27     14
++#define PB44_PCF8757_TP28     15
++
+ #define PB44_GPIO_EXP_BASE    16
++#define PB44_GPIO_VSC7395_CS  (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
+ #define PB44_GPIO_SW_RESET    (PB44_GPIO_EXP_BASE + 6)
+ #define PB44_GPIO_SW_JUMP     (PB44_GPIO_EXP_BASE + 8)
+ #define PB44_GPIO_LED_JUMP1   (PB44_GPIO_EXP_BASE + 9)
+@@ -87,20 +112,59 @@ static struct gpio_keys_button pb44_gpio
+       }
+ };
++static void pb44_vsc7395_reset(void)
++{
++      ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
++      udelay(10);
++      ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
++      mdelay(50);
++}
++
++static struct vsc7385_platform_data pb44_vsc7395_data = {
++      .reset          = pb44_vsc7395_reset,
++      .ucode_name     = "vsc7395_ucode_pb44.bin",
++      .mac_cfg = {
++              .tx_ipg         = 6,
++              .bit2           = 1,
++              .clk_sel        = 0,
++      },
++};
++
++static const char *pb44_part_probes[] = {
++      "RedBoot",
++      NULL,
++};
++
++static struct flash_platform_data pb44_flash_data = {
++      .part_probes    = pb44_part_probes,
++};
++
+ static struct spi_board_info pb44_spi_info[] = {
+       {
+               .bus_num        = 0,
+               .chip_select    = 0,
+               .max_speed_hz   = 25000000,
+               .modalias       = "m25p64",
++              .platform_data  = &pb44_flash_data,
+       },
++      {
++              .bus_num        = 0,
++              .chip_select    = 1,
++              .max_speed_hz   = 25000000,
++              .modalias       = "spi-vsc7385",
++              .platform_data  = &pb44_vsc7395_data,
++      }
+ };
+ static struct ath79_spi_platform_data pb44_spi_data = {
+       .bus_num                = 0,
+-      .num_chipselect         = 1,
++      .num_chipselect         = 2,
+ };
++#define PB44_WAN_PHYMASK      BIT(0)
++#define PB44_LAN_PHYMASK      0
++#define PB44_MDIO_PHYMASK     (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK)
++
+ static void __init pb44_init(void)
+ {
+       i2c_register_board_info(0, pb44_i2c_board_info,
+@@ -116,6 +180,22 @@ static void __init pb44_init(void)
+                          ARRAY_SIZE(pb44_spi_info));
+       ath79_register_usb();
+       ath79_register_pci();
++
++      ath79_register_mdio(0, ~PB44_MDIO_PHYMASK);
++
++      ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
++      ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++      ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK;
++
++      ath79_register_eth(0);
++
++      ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
++      ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++      ath79_eth1_data.speed = SPEED_1000;
++      ath79_eth1_data.duplex = DUPLEX_FULL;
++      ath79_eth1_pll_data.pll_1000 = 0x110000;
++
++      ath79_register_eth(1);
+ }
+ MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -57,6 +57,7 @@ config ATH79_MACH_DB120
+ config ATH79_MACH_PB44
+       bool "Atheros PB44 reference board"
+       select SOC_AR71XX
++      select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_SPI
diff --git a/target/linux/ar71xx/patches-4.9/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-4.9/607-MIPS-ath79-ubnt-xm-fixes.patch
new file mode 100644 (file)
index 0000000..d667215
--- /dev/null
@@ -0,0 +1,14 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -69,9 +69,10 @@ config ATH79_MACH_PB44
+ config ATH79_MACH_UBNT_XM
+       bool "Ubiquiti Networks XM (rev 1.0) board"
+       select SOC_AR724X
++      select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+-      select ATH79_DEV_SPI
++      select ATH79_DEV_M25P80
+       help
+         Say 'Y' here if you want your kernel to support the
+         Ubiquiti Networks XM (rev 1.0) board.
diff --git a/target/linux/ar71xx/patches-4.9/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-4.9/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
new file mode 100644 (file)
index 0000000..536c28d
--- /dev/null
@@ -0,0 +1,20 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -67,12 +67,16 @@ config ATH79_MACH_PB44
+         Atheros PB44 reference board.
+ config ATH79_MACH_UBNT_XM
+-      bool "Ubiquiti Networks XM (rev 1.0) board"
++      bool "Ubiquiti Networks XM/UniFi boards"
+       select SOC_AR724X
++      select SOC_AR934X
+       select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
+       help
+         Say 'Y' here if you want your kernel to support the
+         Ubiquiti Networks XM (rev 1.0) board.
diff --git a/target/linux/ar71xx/patches-4.9/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-4.9/609-MIPS-ath79-ap136-fixes.patch
new file mode 100644 (file)
index 0000000..4d7902e
--- /dev/null
@@ -0,0 +1,300 @@
+--- a/arch/mips/ath79/mach-ap136.c
++++ b/arch/mips/ath79/mach-ap136.c
+@@ -18,23 +18,29 @@
+  *
+  */
+-#include <linux/pci.h>
+-#include <linux/ath9k_platform.h>
++#include <linux/platform_device.h>
++#include <linux/ar8216_platform.h>
+-#include "machtypes.h"
++#include <asm/mach-ath79/ar71xx_regs.h>
++
++#include "common.h"
++#include "pci.h"
++#include "dev-ap9x-pci.h"
+ #include "dev-gpio-buttons.h"
++#include "dev-eth.h"
+ #include "dev-leds-gpio.h"
+-#include "dev-spi.h"
++#include "dev-m25p80.h"
++#include "dev-nfc.h"
+ #include "dev-usb.h"
+ #include "dev-wmac.h"
+-#include "pci.h"
++#include "machtypes.h"
+-#define AP136_GPIO_LED_STATUS_RED     14
+-#define AP136_GPIO_LED_STATUS_GREEN   19
+ #define AP136_GPIO_LED_USB            4
+-#define AP136_GPIO_LED_WLAN_2G                13
+ #define AP136_GPIO_LED_WLAN_5G                12
++#define AP136_GPIO_LED_WLAN_2G                13
++#define AP136_GPIO_LED_STATUS_RED     14
+ #define AP136_GPIO_LED_WPS_RED                15
++#define AP136_GPIO_LED_STATUS_GREEN   19
+ #define AP136_GPIO_LED_WPS_GREEN      20
+ #define AP136_GPIO_BTN_WPS            16
+@@ -43,37 +49,39 @@
+ #define AP136_KEYS_POLL_INTERVAL      20      /* msecs */
+ #define AP136_KEYS_DEBOUNCE_INTERVAL  (3 * AP136_KEYS_POLL_INTERVAL)
+-#define AP136_WMAC_CALDATA_OFFSET 0x1000
+-#define AP136_PCIE_CALDATA_OFFSET 0x5000
++#define AP136_MAC0_OFFSET             0
++#define AP136_MAC1_OFFSET             6
++#define AP136_WMAC_CALDATA_OFFSET     0x1000
++#define AP136_PCIE_CALDATA_OFFSET     0x5000
+ static struct gpio_led ap136_leds_gpio[] __initdata = {
+       {
+-              .name           = "qca:green:status",
++              .name           = "ap136:green:status",
+               .gpio           = AP136_GPIO_LED_STATUS_GREEN,
+               .active_low     = 1,
+       },
+       {
+-              .name           = "qca:red:status",
++              .name           = "ap136:red:status",
+               .gpio           = AP136_GPIO_LED_STATUS_RED,
+               .active_low     = 1,
+       },
+       {
+-              .name           = "qca:green:wps",
++              .name           = "ap136:green:wps",
+               .gpio           = AP136_GPIO_LED_WPS_GREEN,
+               .active_low     = 1,
+       },
+       {
+-              .name           = "qca:red:wps",
++              .name           = "ap136:red:wps",
+               .gpio           = AP136_GPIO_LED_WPS_RED,
+               .active_low     = 1,
+       },
+       {
+-              .name           = "qca:red:wlan-2g",
++              .name           = "ap136:red:wlan-2g",
+               .gpio           = AP136_GPIO_LED_WLAN_2G,
+               .active_low     = 1,
+       },
+       {
+-              .name           = "qca:red:usb",
++              .name           = "ap136:red:usb",
+               .gpio           = AP136_GPIO_LED_USB,
+               .active_low     = 1,
+       }
+@@ -98,59 +106,151 @@ static struct gpio_keys_button ap136_gpi
+       },
+ };
+-static struct spi_board_info ap136_spi_info[] = {
+-      {
+-              .bus_num        = 0,
+-              .chip_select    = 0,
+-              .max_speed_hz   = 25000000,
+-              .modalias       = "mx25l6405d",
+-      }
++static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg;
++static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg;
++
++static struct ar8327_platform_data ap136_ar8327_data = {
++      .pad0_cfg = &ap136_ar8327_pad0_cfg,
++      .pad6_cfg = &ap136_ar8327_pad6_cfg,
++      .port0_cfg = {
++              .force_link = 1,
++              .speed = AR8327_PORT_SPEED_1000,
++              .duplex = 1,
++              .txpause = 1,
++              .rxpause = 1,
++      },
++      .port6_cfg = {
++              .force_link = 1,
++              .speed = AR8327_PORT_SPEED_1000,
++              .duplex = 1,
++              .txpause = 1,
++              .rxpause = 1,
++      },
+ };
+-static struct ath79_spi_platform_data ap136_spi_data = {
+-      .bus_num        = 0,
+-      .num_chipselect = 1,
++static struct mdio_board_info ap136_mdio0_info[] = {
++      {
++              .bus_id = "ag71xx-mdio.0",
++              .phy_addr = 0,
++              .platform_data = &ap136_ar8327_data,
++      },
+ };
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data ap136_ath9k_data;
++static void __init ap136_common_setup(void)
++{
++      u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
++
++      ath79_register_m25p80(NULL);
++
++      ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
++                               ap136_leds_gpio);
++      ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
++                                      ARRAY_SIZE(ap136_gpio_keys),
++                                      ap136_gpio_keys);
++
++      ath79_register_usb();
++      ath79_register_nfc();
++
++      ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
++
++      ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+-static int ap136_pci_plat_dev_init(struct pci_dev *dev)
++      ath79_register_mdio(0, 0x0);
++      ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
++
++      mdiobus_register_board_info(ap136_mdio0_info,
++                                  ARRAY_SIZE(ap136_mdio0_info));
++
++      /* GMAC0 is connected to the RMGII interface */
++      ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
++      ath79_eth0_data.phy_mask = BIT(0);
++      ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
++
++      ath79_register_eth(0);
++
++      /* GMAC1 is connected tot eh SGMII interface */
++      ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
++      ath79_eth1_data.speed = SPEED_1000;
++      ath79_eth1_data.duplex = DUPLEX_FULL;
++
++      ath79_register_eth(1);
++}
++
++static void __init ap136_010_setup(void)
+ {
+-      if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
+-              dev->dev.platform_data = &ap136_ath9k_data;
++      u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+-      return 0;
++      /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */
++      ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
++      ap136_ar8327_pad0_cfg.txclk_delay_en = true;
++      ap136_ar8327_pad0_cfg.rxclk_delay_en = true;
++      ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
++      ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
++
++      /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */
++      ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
++      ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
++      ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
++
++      ath79_eth0_pll_data.pll_1000 = 0xa6000000;
++      ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++      ap136_common_setup();
++      ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
+ }
+-static void __init ap136_pci_init(u8 *eeprom)
++MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
++           "Atheros AP136-010 reference board",
++           ap136_010_setup);
++
++static void __init ap136_020_common_setup(void)
+ {
+-      memcpy(ap136_ath9k_data.eeprom_data, eeprom,
+-             sizeof(ap136_ath9k_data.eeprom_data));
++      /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
++      ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
++      ap136_ar8327_pad0_cfg.sgmii_delay_en = true;
++
++      /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
++      ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII;
++      ap136_ar8327_pad6_cfg.txclk_delay_en = true;
++      ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
++      ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
++      ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
+-      ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
+-      ath79_register_pci();
++      ath79_eth0_pll_data.pll_1000 = 0x56000000;
++      ath79_eth1_pll_data.pll_1000 = 0x03000101;
++
++      ap136_common_setup();
+ }
+-#else
+-static inline void ap136_pci_init(u8 *eeprom) {}
+-#endif /* CONFIG_PCI */
+-static void __init ap136_setup(void)
++static void __init ap136_020_setup(void)
+ {
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+-      ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
+-                               ap136_leds_gpio);
+-      ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
+-                                      ARRAY_SIZE(ap136_gpio_keys),
+-                                      ap136_gpio_keys);
+-      ath79_register_spi(&ap136_spi_data, ap136_spi_info,
+-                         ARRAY_SIZE(ap136_spi_info));
+-      ath79_register_usb();
+-      ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
+-      ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
++      ap136_020_common_setup();
++      ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
+ }
+-MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
+-           "Atheros AP136-010 reference board",
+-           ap136_setup);
++MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020",
++           "Atheros AP136-020 reference board",
++           ap136_020_setup);
++
++/*
++ * AP135-020 is similar to AP136-020, any future AP135 specific init
++ * code can be added here.
++ */
++static void __init ap135_020_setup(void)
++{
++      ap136_leds_gpio[0].name = "ap135:green:status";
++      ap136_leds_gpio[1].name = "ap135:red:status";
++      ap136_leds_gpio[2].name = "ap135:green:wps";
++      ap136_leds_gpio[3].name = "ap135:red:wps";
++      ap136_leds_gpio[4].name = "ap135:red:wlan-2g";
++      ap136_leds_gpio[5].name = "ap135:red:usb";
++
++      ap136_020_common_setup();
++      ath79_register_pci();
++}
++
++MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020",
++           "Atheros AP135-020 reference board",
++           ap135_020_setup);
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -16,16 +16,17 @@ config ATH79_MACH_AP121
+         Atheros AP121 reference board.
+ config ATH79_MACH_AP136
+-      bool "Atheros AP136 reference board"
++      bool "Atheros AP136/AP135 reference board"
+       select SOC_QCA955X
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_NFC
+       select ATH79_DEV_SPI
+       select ATH79_DEV_USB
+       select ATH79_DEV_WMAC
+       help
+         Say 'Y' here if you want your kernel to support the
+-        Atheros AP136 reference board.
++        Atheros AP136 or AP135 reference boards.
+ config ATH79_MACH_AP81
+       bool "Atheros AP81 reference board"
diff --git a/target/linux/ar71xx/patches-4.9/611-MIPS-ath79-wdt-timeout.patch b/target/linux/ar71xx/patches-4.9/611-MIPS-ath79-wdt-timeout.patch
new file mode 100644 (file)
index 0000000..0927d5a
--- /dev/null
@@ -0,0 +1,25 @@
+MIPS: ath79: fix maximum timeout
+
+If the userland tries to set a timeout higher than the max_timeout, then we should fallback to max_timeout.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+
+--- a/drivers/watchdog/ath79_wdt.c
++++ b/drivers/watchdog/ath79_wdt.c
+@@ -115,10 +115,14 @@ static inline void ath79_wdt_disable(voi
+ static int ath79_wdt_set_timeout(int val)
+ {
+-      if (val < 1 || val > max_timeout)
++      if (val < 1)
+               return -EINVAL;
+-      timeout = val;
++      if (val > max_timeout)
++              timeout = max_timeout;
++      else
++              timeout = val;
++
+       ath79_wdt_keepalive();
+       return 0;
diff --git a/target/linux/ar71xx/patches-4.9/612-MIPS-ath79-set-buffalo-txgain.patch b/target/linux/ar71xx/patches-4.9/612-MIPS-ath79-set-buffalo-txgain.patch
new file mode 100644 (file)
index 0000000..3d100e0
--- /dev/null
@@ -0,0 +1,24 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -319,6 +319,11 @@ void __init ath79_wmac_disable_5ghz(void
+       ath79_wmac_data.disable_5ghz = true;
+ }
++void __init ath79_wmac_set_tx_gain_buffalo(void)
++{
++      ath79_wmac_data.tx_gain_buffalo = true;
++}
++
+ void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+       if (soc_is_ar913x())
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -16,6 +16,7 @@ void ath79_register_wmac(u8 *cal_data, u
+ void ath79_register_wmac_simple(void);
+ void ath79_wmac_disable_2ghz(void);
+ void ath79_wmac_disable_5ghz(void);
++void ath79_wmac_set_tx_gain_buffalo(void);
+ bool ar93xx_wmac_read_mac_address(u8 *dest);
diff --git a/target/linux/ar71xx/patches-4.9/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch b/target/linux/ar71xx/patches-4.9/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch
new file mode 100644 (file)
index 0000000..5c1205d
--- /dev/null
@@ -0,0 +1,76 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -18,9 +18,11 @@
+ #include <linux/etherdevice.h>
+ #include <linux/platform_device.h>
+ #include <linux/ath9k_platform.h>
++#include <linux/gpio.h>
+ #include <asm/mach-ath79/ath79.h>
+ #include <asm/mach-ath79/ar71xx_regs.h>
++#include "common.h"
+ #include "dev-wmac.h"
+ static u8 ath79_wmac_mac[ETH_ALEN];
+@@ -324,6 +326,51 @@ void __init ath79_wmac_set_tx_gain_buffa
+       ath79_wmac_data.tx_gain_buffalo = true;
+ }
++static int ath79_request_ext_lna_gpio(unsigned chain, int gpio)
++{
++      char *label;
++      int err;
++
++      label = kasprintf(GFP_KERNEL, "external LNA%u", chain);
++      if (!label)
++              return -ENOMEM;
++
++      err = gpio_request_one(gpio, GPIOF_DIR_OUT | GPIOF_INIT_LOW, label);
++      if (err) {
++              pr_err("unable to request GPIO%d for external LNA%u\n",
++                      gpio, chain);
++              kfree(label);
++      }
++
++      return err;
++}
++
++static void ar934x_set_ext_lna_gpio(unsigned chain, int gpio)
++{
++      unsigned int sel;
++      int err;
++
++      if (WARN_ON(chain > 1))
++              return;
++
++      err = ath79_request_ext_lna_gpio(chain, gpio);
++      if (err)
++              return;
++
++      if (chain == 0)
++              sel = AR934X_GPIO_OUT_EXT_LNA0;
++      else
++              sel = AR934X_GPIO_OUT_EXT_LNA1;
++
++      ath79_gpio_output_select(gpio, sel);
++}
++
++void __init ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio)
++{
++      if (soc_is_ar934x())
++              ar934x_set_ext_lna_gpio(chain, gpio);
++}
++
+ void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+       if (soc_is_ar913x())
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -17,6 +17,7 @@ void ath79_register_wmac_simple(void);
+ void ath79_wmac_disable_2ghz(void);
+ void ath79_wmac_disable_5ghz(void);
+ void ath79_wmac_set_tx_gain_buffalo(void);
++void ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio);
+ bool ar93xx_wmac_read_mac_address(u8 *dest);
diff --git a/target/linux/ar71xx/patches-4.9/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch b/target/linux/ar71xx/patches-4.9/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch
new file mode 100644 (file)
index 0000000..869fdd6
--- /dev/null
@@ -0,0 +1,705 @@
+From 5300a7cd7ed2f88488ddba62947b9c6bb9663777 Mon Sep 17 00:00:00 2001
+Message-Id: <5300a7cd7ed2f88488ddba62947b9c6bb9663777.1396122227.git.mschiffer@universe-factory.net>
+From: Matthias Schiffer <mschiffer@universe-factory.net>
+Date: Sat, 29 Mar 2014 20:26:08 +0100
+Subject: [PATCH 1/2] MIPS: ath79: add support for QCA953x SoC
+
+Note that the clock calculation looks very similar to the QCA955x, but the
+meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
+---
+ arch/mips/ath79/Kconfig                        |  6 +-
+ arch/mips/ath79/clock.c                        | 78 ++++++++++++++++++++++++++
+ arch/mips/ath79/common.c                       |  4 ++
+ arch/mips/ath79/dev-common.c                   |  1 +
+ arch/mips/ath79/dev-wmac.c                     | 20 +++++++
+ arch/mips/ath79/early_printk.c                 |  1 +
+ arch/mips/ath79/gpio.c                         |  4 +-
+ arch/mips/ath79/irq.c                          |  4 ++
+ arch/mips/ath79/setup.c                        |  8 ++-
+ arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 48 ++++++++++++++++
+ arch/mips/include/asm/mach-ath79/ath79.h       | 11 ++++
+ 11 files changed, 182 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -104,6 +104,10 @@ config SOC_AR934X
+       select PCI_AR724X if PCI
+       def_bool n
++config SOC_QCA953X
++      select USB_ARCH_HAS_EHCI
++      def_bool n
++
+ config SOC_QCA955X
+       select HW_HAS_PCI
+       select PCI_AR724X if PCI
+@@ -143,7 +147,7 @@ config ATH79_DEV_USB
+       def_bool n
+ config ATH79_DEV_WMAC
+-      depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
++      depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X)
+       def_bool n
+ config ATH79_NVRAM
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -356,6 +356,91 @@ static void __init ar934x_clocks_init(vo
+       iounmap(dpll_base);
+ }
++static void __init qca953x_clocks_init(void)
++{
++      unsigned long ref_rate;
++      unsigned long cpu_rate;
++      unsigned long ddr_rate;
++      unsigned long ahb_rate;
++      u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
++      u32 cpu_pll, ddr_pll;
++      u32 bootstrap;
++
++      bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
++      if (bootstrap & QCA953X_BOOTSTRAP_REF_CLK_40)
++              ref_rate = 40 * 1000 * 1000;
++      else
++              ref_rate = 25 * 1000 * 1000;
++
++      pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
++      out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
++                QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
++      ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
++                QCA953X_PLL_CPU_CONFIG_REFDIV_MASK;
++      nint = (pll >> QCA953X_PLL_CPU_CONFIG_NINT_SHIFT) &
++             QCA953X_PLL_CPU_CONFIG_NINT_MASK;
++      frac = (pll >> QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
++             QCA953X_PLL_CPU_CONFIG_NFRAC_MASK;
++
++      cpu_pll = nint * ref_rate / ref_div;
++      cpu_pll += frac * (ref_rate >> 6) / ref_div;
++      cpu_pll /= (1 << out_div);
++
++      pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
++      out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
++                QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
++      ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
++                QCA953X_PLL_DDR_CONFIG_REFDIV_MASK;
++      nint = (pll >> QCA953X_PLL_DDR_CONFIG_NINT_SHIFT) &
++             QCA953X_PLL_DDR_CONFIG_NINT_MASK;
++      frac = (pll >> QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
++             QCA953X_PLL_DDR_CONFIG_NFRAC_MASK;
++
++      ddr_pll = nint * ref_rate / ref_div;
++      ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4);
++      ddr_pll /= (1 << out_div);
++
++      clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
++
++      postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
++                QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
++
++      if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
++              cpu_rate = ref_rate;
++      else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
++              cpu_rate = cpu_pll / (postdiv + 1);
++      else
++              cpu_rate = ddr_pll / (postdiv + 1);
++
++      postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
++                QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
++
++      if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
++              ddr_rate = ref_rate;
++      else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
++              ddr_rate = ddr_pll / (postdiv + 1);
++      else
++              ddr_rate = cpu_pll / (postdiv + 1);
++
++      postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
++                QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
++
++      if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
++              ahb_rate = ref_rate;
++      else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
++              ahb_rate = ddr_pll / (postdiv + 1);
++      else
++              ahb_rate = cpu_pll / (postdiv + 1);
++
++      ath79_add_sys_clkdev("ref", ref_rate);
++      ath79_add_sys_clkdev("cpu", cpu_rate);
++      ath79_add_sys_clkdev("ddr", ddr_rate);
++      ath79_add_sys_clkdev("ahb", ahb_rate);
++
++      clk_add_alias("wdt", NULL, "ref", NULL);
++      clk_add_alias("uart", NULL, "ref", NULL);
++}
++
+ static void __init qca955x_clocks_init(void)
+ {
+       unsigned long ref_rate;
+@@ -451,6 +536,8 @@ void __init ath79_clocks_init(void)
+               ar933x_clocks_init();
+       else if (soc_is_ar934x())
+               ar934x_clocks_init();
++      else if (soc_is_qca953x())
++              qca953x_clocks_init();
+       else if (soc_is_qca955x())
+               qca955x_clocks_init();
+       else
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -103,6 +103,8 @@ void ath79_device_reset_set(u32 mask)
+               reg = AR933X_RESET_REG_RESET_MODULE;
+       else if (soc_is_ar934x())
+               reg = AR934X_RESET_REG_RESET_MODULE;
++      else if (soc_is_qca953x())
++              reg = QCA953X_RESET_REG_RESET_MODULE;
+       else if (soc_is_qca955x())
+               reg = QCA955X_RESET_REG_RESET_MODULE;
+       else
+@@ -131,6 +133,8 @@ void ath79_device_reset_clear(u32 mask)
+               reg = AR933X_RESET_REG_RESET_MODULE;
+       else if (soc_is_ar934x())
+               reg = AR934X_RESET_REG_RESET_MODULE;
++      else if (soc_is_qca953x())
++              reg = QCA953X_RESET_REG_RESET_MODULE;
+       else if (soc_is_qca955x())
+               reg = QCA955X_RESET_REG_RESET_MODULE;
+       else
+--- a/arch/mips/ath79/dev-common.c
++++ b/arch/mips/ath79/dev-common.c
+@@ -94,6 +94,7 @@ void __init ath79_register_uart(void)
+           soc_is_ar724x() ||
+           soc_is_ar913x() ||
+           soc_is_ar934x() ||
++          soc_is_qca953x() ||
+           soc_is_qca955x()) {
+               ath79_uart_data[0].uartclk = uart_clk_rate;
+               platform_device_register(&ath79_uart_device);
+@@ -157,6 +158,9 @@ void __init ath79_gpio_init(void)
+       } else if (soc_is_ar934x()) {
+               ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT;
+               ath79_gpio_pdata.oe_inverted = 1;
++      } else if (soc_is_qca953x()) {
++              ath79_gpio_pdata.ngpios = QCA953X_GPIO_COUNT;
++              ath79_gpio_pdata.oe_inverted = 1;
+       } else if (soc_is_qca955x()) {
+               ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
+               ath79_gpio_pdata.oe_inverted = 1;
+--- a/arch/mips/ath79/dev-usb.c
++++ b/arch/mips/ath79/dev-usb.c
+@@ -236,6 +236,30 @@ static void __init ar934x_usb_setup(void
+                          &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+ }
++static void __init qca953x_usb_setup(void)
++{
++      u32 bootstrap;
++
++      bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
++
++      ath79_device_reset_set(QCA953X_RESET_USBSUS_OVERRIDE);
++      udelay(1000);
++
++      ath79_device_reset_clear(QCA953X_RESET_USB_PHY);
++      udelay(1000);
++
++      ath79_device_reset_clear(QCA953X_RESET_USB_PHY_ANALOG);
++      udelay(1000);
++
++      ath79_device_reset_clear(QCA953X_RESET_USB_HOST);
++      udelay(1000);
++
++      ath79_usb_register("ehci-platform", -1,
++                         QCA953X_EHCI_BASE, QCA953X_EHCI_SIZE,
++                         ATH79_CPU_IRQ(3),
++                         &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
++}
++
+ static void qca955x_usb_reset_notifier(struct platform_device *pdev)
+ {
+       u32 base;
+@@ -286,6 +310,8 @@ void __init ath79_register_usb(void)
+               ar933x_usb_setup();
+       else if (soc_is_ar934x())
+               ar934x_usb_setup();
++      else if (soc_is_qca953x())
++              qca953x_usb_setup();
+       else if (soc_is_qca955x())
+               qca955x_usb_setup();
+       else
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -100,7 +100,7 @@ static int ar933x_wmac_reset(void)
+       return -ETIMEDOUT;
+ }
+-static int ar933x_r1_get_wmac_revision(void)
++static int ar93xx_get_soc_revision(void)
+ {
+       return ath79_soc_rev;
+ }
+@@ -125,7 +125,7 @@ static void __init ar933x_wmac_setup(voi
+               ath79_wmac_data.is_clk_25mhz = true;
+       if (ath79_soc_rev == 1)
+-              ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
++              ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
+       ath79_wmac_data.external_reset = ar933x_wmac_reset;
+ }
+@@ -150,6 +150,26 @@ static void ar934x_wmac_setup(void)
+       ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
+ }
++static void qca953x_wmac_setup(void)
++{
++      u32 t;
++
++      ath79_wmac_device.name = "qca953x_wmac";
++
++      ath79_wmac_resources[0].start = QCA953X_WMAC_BASE;
++      ath79_wmac_resources[0].end = QCA953X_WMAC_BASE + QCA953X_WMAC_SIZE - 1;
++      ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
++      ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
++
++      t = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
++      if (t & QCA953X_BOOTSTRAP_REF_CLK_40)
++              ath79_wmac_data.is_clk_25mhz = false;
++      else
++              ath79_wmac_data.is_clk_25mhz = true;
++
++      ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
++}
++
+ static void qca955x_wmac_setup(void)
+ {
+       u32 t;
+@@ -379,6 +399,8 @@ void __init ath79_register_wmac(u8 *cal_
+               ar933x_wmac_setup();
+       else if (soc_is_ar934x())
+               ar934x_wmac_setup();
++      else if (soc_is_qca953x())
++              qca953x_wmac_setup();
+       else if (soc_is_qca955x())
+               qca955x_wmac_setup();
+       else
+--- a/arch/mips/ath79/early_printk.c
++++ b/arch/mips/ath79/early_printk.c
+@@ -116,6 +116,8 @@ static void prom_putchar_init(void)
+       case REV_ID_MAJOR_AR9341:
+       case REV_ID_MAJOR_AR9342:
+       case REV_ID_MAJOR_AR9344:
++      case REV_ID_MAJOR_QCA9533:
++      case REV_ID_MAJOR_QCA9533_V2:
+       case REV_ID_MAJOR_QCA9556:
+       case REV_ID_MAJOR_QCA9558:
+               _prom_putchar = prom_putchar_ar71xx;
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -31,7 +31,7 @@ static void __iomem *ath79_gpio_get_func
+           soc_is_ar913x() ||
+           soc_is_ar933x())
+               reg = AR71XX_GPIO_REG_FUNC;
+-      else if (soc_is_ar934x())
++      else if (soc_is_ar934x() || soc_is_qca953x())
+               reg = AR934X_GPIO_REG_FUNC;
+       else
+               BUG();
+@@ -64,7 +64,7 @@ void __init ath79_gpio_output_select(uns
+       unsigned int reg;
+       u32 t, s;
+-      BUG_ON(!soc_is_ar934x());
++      BUG_ON(!soc_is_ar934x() && !soc_is_qca953x());
+       if (gpio >= AR934X_GPIO_COUNT)
+               return;
+--- a/arch/mips/ath79/irq.c
++++ b/arch/mips/ath79/irq.c
+@@ -56,6 +56,34 @@ static void ar934x_ip2_irq_init(void)
+       irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
+ }
++static void qca953x_ip2_irq_dispatch(struct irq_desc *desc)
++{
++      u32 status;
++
++      status = ath79_reset_rr(QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS);
++
++      if (status & QCA953X_PCIE_WMAC_INT_PCIE_ALL) {
++              ath79_ddr_wb_flush(3);
++              generic_handle_irq(ATH79_IP2_IRQ(0));
++      } else if (status & QCA953X_PCIE_WMAC_INT_WMAC_ALL) {
++              ath79_ddr_wb_flush(4);
++              generic_handle_irq(ATH79_IP2_IRQ(1));
++      } else {
++              spurious_interrupt();
++      }
++}
++
++static void qca953x_irq_init(void)
++{
++      int i;
++
++      for (i = ATH79_IP2_IRQ_BASE;
++           i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
++              irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
++
++      irq_set_chained_handler(ATH79_CPU_IRQ(2), qca953x_ip2_irq_dispatch);
++}
++
+ static void qca955x_ip2_irq_dispatch(struct irq_desc *desc)
+ {
+       u32 status;
+@@ -143,7 +171,7 @@ void __init arch_init_irq(void)
+           soc_is_ar913x() || soc_is_ar933x()) {
+               irq_wb_chan2 = 3;
+               irq_wb_chan3 = 2;
+-      } else if (soc_is_ar934x()) {
++      } else if (soc_is_ar934x() || soc_is_qca953x()) {
+               irq_wb_chan3 = 2;
+       }
+@@ -154,6 +182,7 @@ void __init arch_init_irq(void)
+       else if (soc_is_ar724x() ||
+                soc_is_ar933x() ||
+                soc_is_ar934x() ||
++               soc_is_qca953x() ||
+                soc_is_qca955x())
+               misc_is_ar71xx = false;
+       else
+@@ -164,6 +193,8 @@ void __init arch_init_irq(void)
+       if (soc_is_ar934x())
+               ar934x_ip2_irq_init();
++      else if (soc_is_qca953x())
++              qca953x_irq_init();
+       else if (soc_is_qca955x())
+               qca955x_irq_init();
+ }
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -60,6 +60,7 @@ static void __init ath79_detect_sys_type
+       u32 major;
+       u32 minor;
+       u32 rev = 0;
++      u32 ver = 1;
+       id = ath79_reset_rr(AR71XX_RESET_REG_REV_ID);
+       major = id & REV_ID_MAJOR_MASK;
+@@ -152,6 +153,17 @@ static void __init ath79_detect_sys_type
+               rev = id & AR934X_REV_ID_REVISION_MASK;
+               break;
++      case REV_ID_MAJOR_QCA9533_V2:
++              ver = 2;
++              ath79_soc_rev = 2;
++              /* drop through */
++
++      case REV_ID_MAJOR_QCA9533:
++              ath79_soc = ATH79_SOC_QCA9533;
++              chip = "9533";
++              rev = id & QCA953X_REV_ID_REVISION_MASK;
++              break;
++
+       case REV_ID_MAJOR_QCA9556:
+               ath79_soc = ATH79_SOC_QCA9556;
+               chip = "9556";
+@@ -168,11 +180,12 @@ static void __init ath79_detect_sys_type
+               panic("ath79: unknown SoC, id:0x%08x", id);
+       }
+-      ath79_soc_rev = rev;
++      if (ver == 1)
++              ath79_soc_rev = rev;
+-      if (soc_is_qca955x())
+-              sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u",
+-                      chip, rev);
++      if (soc_is_qca953x() || soc_is_qca955x())
++              sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u",
++                      chip, ver, rev);
+       else
+               sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
+       pr_info("SoC: %s\n", ath79_sys_type);
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -105,6 +105,21 @@
+ #define AR934X_SRIF_BASE      (AR71XX_APB_BASE + 0x00116000)
+ #define AR934X_SRIF_SIZE      0x1000
++#define QCA953X_GMAC_BASE     (AR71XX_APB_BASE + 0x00070000)
++#define QCA953X_GMAC_SIZE     0x14
++#define QCA953X_WMAC_BASE     (AR71XX_APB_BASE + 0x00100000)
++#define QCA953X_WMAC_SIZE     0x20000
++#define QCA953X_EHCI_BASE     0x1b000000
++#define QCA953X_EHCI_SIZE     0x200
++#define QCA953X_SRIF_BASE     (AR71XX_APB_BASE + 0x00116000)
++#define QCA953X_SRIF_SIZE     0x1000
++
++#define QCA953X_PCI_CFG_BASE0 0x14000000
++#define QCA953X_PCI_CTRL_BASE0        (AR71XX_APB_BASE + 0x000f0000)
++#define QCA953X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000)
++#define QCA953X_PCI_MEM_BASE0 0x10000000
++#define QCA953X_PCI_MEM_SIZE  0x02000000
++
+ #define QCA955X_PCI_MEM_BASE0 0x10000000
+ #define QCA955X_PCI_MEM_BASE1 0x12000000
+ #define QCA955X_PCI_MEM_SIZE  0x02000000
+@@ -180,6 +195,12 @@
+ #define AR934X_OTP_INTF3_ADDRESS                      0x3100c
+ #define AR934X_OTP_PGENB_SETUP_HOLD_TIME_ADDRESS      0x31034
++#define QCA953X_DDR_REG_FLUSH_GE0     0x9c
++#define QCA953X_DDR_REG_FLUSH_GE1     0xa0
++#define QCA953X_DDR_REG_FLUSH_USB     0xa4
++#define QCA953X_DDR_REG_FLUSH_PCIE    0xa8
++#define QCA953X_DDR_REG_FLUSH_WMAC    0xac
++
+ /*
+  * PLL block
+  */
+@@ -289,6 +310,44 @@
+ #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL  BIT(6)
++#define QCA953X_PLL_CPU_CONFIG_REG            0x00
++#define QCA953X_PLL_DDR_CONFIG_REG            0x04
++#define QCA953X_PLL_CLK_CTRL_REG              0x08
++#define QCA953X_PLL_SWITCH_CLOCK_CONTROL_REG  0x24
++#define QCA953X_PLL_ETH_XMII_CONTROL_REG      0x2c
++#define QCA953X_PLL_ETH_SGMII_CONTROL_REG     0x48
++
++#define QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT    0
++#define QCA953X_PLL_CPU_CONFIG_NFRAC_MASK     0x3f
++#define QCA953X_PLL_CPU_CONFIG_NINT_SHIFT     6
++#define QCA953X_PLL_CPU_CONFIG_NINT_MASK      0x3f
++#define QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT   12
++#define QCA953X_PLL_CPU_CONFIG_REFDIV_MASK    0x1f
++#define QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT   19
++#define QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK    0x7
++
++#define QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT    0
++#define QCA953X_PLL_DDR_CONFIG_NFRAC_MASK     0x3ff
++#define QCA953X_PLL_DDR_CONFIG_NINT_SHIFT     10
++#define QCA953X_PLL_DDR_CONFIG_NINT_MASK      0x3f
++#define QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT   16
++#define QCA953X_PLL_DDR_CONFIG_REFDIV_MASK    0x1f
++#define QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT   23
++#define QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK    0x7
++
++#define QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS           BIT(2)
++#define QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS           BIT(3)
++#define QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS           BIT(4)
++#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT               5
++#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK                0x1f
++#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT               10
++#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK                0x1f
++#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT               15
++#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK                0x1f
++#define QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL               BIT(20)
++#define QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL               BIT(21)
++#define QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL               BIT(24)
++
+ #define QCA955X_PLL_CPU_CONFIG_REG            0x00
+ #define QCA955X_PLL_DDR_CONFIG_REG            0x04
+ #define QCA955X_PLL_CLK_CTRL_REG              0x08
+@@ -365,6 +424,10 @@
+ #define AR934X_RESET_REG_BOOTSTRAP            0xb0
+ #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
++#define QCA953X_RESET_REG_RESET_MODULE                0x1c
++#define QCA953X_RESET_REG_BOOTSTRAP           0xb0
++#define QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS        0xac
++
+ #define QCA955X_RESET_REG_RESET_MODULE                0x1c
+ #define QCA955X_RESET_REG_BOOTSTRAP           0xb0
+ #define QCA955X_RESET_REG_EXT_INT_STATUS      0xac
+@@ -460,6 +523,27 @@
+ #define AR934X_RESET_MBOX             BIT(1)
+ #define AR934X_RESET_I2S              BIT(0)
++#define QCA953X_RESET_USB_EXT_PWR     BIT(29)
++#define QCA953X_RESET_EXTERNAL                BIT(28)
++#define QCA953X_RESET_RTC             BIT(27)
++#define QCA953X_RESET_FULL_CHIP               BIT(24)
++#define QCA953X_RESET_GE1_MDIO                BIT(23)
++#define QCA953X_RESET_GE0_MDIO                BIT(22)
++#define QCA953X_RESET_CPU_NMI         BIT(21)
++#define QCA953X_RESET_CPU_COLD                BIT(20)
++#define QCA953X_RESET_DDR             BIT(16)
++#define QCA953X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
++#define QCA953X_RESET_GE1_MAC         BIT(13)
++#define QCA953X_RESET_ETH_SWITCH_ANALOG       BIT(12)
++#define QCA953X_RESET_USB_PHY_ANALOG  BIT(11)
++#define QCA953X_RESET_GE0_MAC         BIT(9)
++#define QCA953X_RESET_ETH_SWITCH      BIT(8)
++#define QCA953X_RESET_PCIE_PHY                BIT(7)
++#define QCA953X_RESET_PCIE            BIT(6)
++#define QCA953X_RESET_USB_HOST                BIT(5)
++#define QCA953X_RESET_USB_PHY         BIT(4)
++#define QCA953X_RESET_USBSUS_OVERRIDE BIT(3)
++
+ #define QCA955X_RESET_HOST            BIT(31)
+ #define QCA955X_RESET_SLIC            BIT(30)
+ #define QCA955X_RESET_HDMA            BIT(29)
+@@ -513,6 +597,13 @@
+ #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
+ #define AR934X_BOOTSTRAP_DDR1         BIT(0)
++#define QCA953X_BOOTSTRAP_SW_OPTION2  BIT(12)
++#define QCA953X_BOOTSTRAP_SW_OPTION1  BIT(11)
++#define QCA953X_BOOTSTRAP_EJTAG_MODE  BIT(5)
++#define QCA953X_BOOTSTRAP_REF_CLK_40  BIT(4)
++#define QCA953X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
++#define QCA953X_BOOTSTRAP_DDR1                BIT(0)
++
+ #define QCA955X_BOOTSTRAP_REF_CLK_40  BIT(4)
+ #define AR934X_PCIE_WMAC_INT_WMAC_MISC                BIT(0)
+@@ -533,6 +624,24 @@
+        AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
+        AR934X_PCIE_WMAC_INT_PCIE_RC3)
++#define QCA953X_PCIE_WMAC_INT_WMAC_MISC               BIT(0)
++#define QCA953X_PCIE_WMAC_INT_WMAC_TX         BIT(1)
++#define QCA953X_PCIE_WMAC_INT_WMAC_RXLP               BIT(2)
++#define QCA953X_PCIE_WMAC_INT_WMAC_RXHP               BIT(3)
++#define QCA953X_PCIE_WMAC_INT_PCIE_RC         BIT(4)
++#define QCA953X_PCIE_WMAC_INT_PCIE_RC0                BIT(5)
++#define QCA953X_PCIE_WMAC_INT_PCIE_RC1                BIT(6)
++#define QCA953X_PCIE_WMAC_INT_PCIE_RC2                BIT(7)
++#define QCA953X_PCIE_WMAC_INT_PCIE_RC3                BIT(8)
++#define QCA953X_PCIE_WMAC_INT_WMAC_ALL \
++      (QCA953X_PCIE_WMAC_INT_WMAC_MISC | QCA953X_PCIE_WMAC_INT_WMAC_TX | \
++       QCA953X_PCIE_WMAC_INT_WMAC_RXLP | QCA953X_PCIE_WMAC_INT_WMAC_RXHP)
++
++#define QCA953X_PCIE_WMAC_INT_PCIE_ALL \
++      (QCA953X_PCIE_WMAC_INT_PCIE_RC | QCA953X_PCIE_WMAC_INT_PCIE_RC0 | \
++       QCA953X_PCIE_WMAC_INT_PCIE_RC1 | QCA953X_PCIE_WMAC_INT_PCIE_RC2 | \
++       QCA953X_PCIE_WMAC_INT_PCIE_RC3)
++
+ #define QCA955X_EXT_INT_WMAC_MISC             BIT(0)
+ #define QCA955X_EXT_INT_WMAC_TX                       BIT(1)
+ #define QCA955X_EXT_INT_WMAC_RXLP             BIT(2)
+@@ -575,6 +684,8 @@
+ #define REV_ID_MAJOR_AR9341           0x0120
+ #define REV_ID_MAJOR_AR9342           0x1120
+ #define REV_ID_MAJOR_AR9344           0x2120
++#define REV_ID_MAJOR_QCA9533          0x0140
++#define REV_ID_MAJOR_QCA9533_V2               0x0160
+ #define REV_ID_MAJOR_QCA9556          0x0130
+ #define REV_ID_MAJOR_QCA9558          0x1130
+@@ -597,6 +708,8 @@
+ #define AR934X_REV_ID_REVISION_MASK   0xf
++#define QCA953X_REV_ID_REVISION_MASK  0xf
++
+ #define QCA955X_REV_ID_REVISION_MASK  0xf
+ /*
+@@ -644,6 +757,25 @@
+ #define AR934X_GPIO_REG_OUT_FUNC5     0x40
+ #define AR934X_GPIO_REG_FUNC          0x6c
++#define QCA953X_GPIO_REG_OUT_FUNC0    0x2c
++#define QCA953X_GPIO_REG_OUT_FUNC1    0x30
++#define QCA953X_GPIO_REG_OUT_FUNC2    0x34
++#define QCA953X_GPIO_REG_OUT_FUNC3    0x38
++#define QCA953X_GPIO_REG_OUT_FUNC4    0x3c
++#define QCA953X_GPIO_REG_IN_ENABLE0   0x44
++#define QCA953X_GPIO_REG_FUNC         0x6c
++
++#define QCA953X_GPIO_OUT_MUX_SPI_CS1          10
++#define QCA953X_GPIO_OUT_MUX_SPI_CS2          11
++#define QCA953X_GPIO_OUT_MUX_SPI_CS0          9
++#define QCA953X_GPIO_OUT_MUX_SPI_CLK          8
++#define QCA953X_GPIO_OUT_MUX_SPI_MOSI         12
++#define QCA953X_GPIO_OUT_MUX_LED_LINK1                41
++#define QCA953X_GPIO_OUT_MUX_LED_LINK2                42
++#define QCA953X_GPIO_OUT_MUX_LED_LINK3                43
++#define QCA953X_GPIO_OUT_MUX_LED_LINK4                44
++#define QCA953X_GPIO_OUT_MUX_LED_LINK5                45
++
+ #define QCA955X_GPIO_REG_OUT_FUNC0    0x2c
+ #define QCA955X_GPIO_REG_OUT_FUNC1    0x30
+ #define QCA955X_GPIO_REG_OUT_FUNC2    0x34
+@@ -658,6 +790,7 @@
+ #define AR913X_GPIO_COUNT             22
+ #define AR933X_GPIO_COUNT             30
+ #define AR934X_GPIO_COUNT             23
++#define QCA953X_GPIO_COUNT            18
+ #define QCA955X_GPIO_COUNT            24
+ /*
+@@ -681,6 +814,24 @@
+ #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT        13
+ #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
++#define QCA953X_SRIF_CPU_DPLL1_REG    0x1c0
++#define QCA953X_SRIF_CPU_DPLL2_REG    0x1c4
++#define QCA953X_SRIF_CPU_DPLL3_REG    0x1c8
++
++#define QCA953X_SRIF_DDR_DPLL1_REG    0x240
++#define QCA953X_SRIF_DDR_DPLL2_REG    0x244
++#define QCA953X_SRIF_DDR_DPLL3_REG    0x248
++
++#define QCA953X_SRIF_DPLL1_REFDIV_SHIFT       27
++#define QCA953X_SRIF_DPLL1_REFDIV_MASK        0x1f
++#define QCA953X_SRIF_DPLL1_NINT_SHIFT 18
++#define QCA953X_SRIF_DPLL1_NINT_MASK  0x1ff
++#define QCA953X_SRIF_DPLL1_NFRAC_MASK 0x0003ffff
++
++#define QCA953X_SRIF_DPLL2_LOCAL_PLL  BIT(30)
++#define QCA953X_SRIF_DPLL2_OUTDIV_SHIFT       13
++#define QCA953X_SRIF_DPLL2_OUTDIV_MASK        0x7
++
+ #define AR71XX_GPIO_FUNC_STEREO_EN            BIT(17)
+ #define AR71XX_GPIO_FUNC_SLIC_EN              BIT(16)
+ #define AR71XX_GPIO_FUNC_SPI_CS2_EN           BIT(13)
+@@ -887,6 +1038,16 @@
+ #define AR934X_ETH_CFG_RDV_DELAY_SHIFT  16
+ /*
++ * QCA953X GMAC Interface
++ */
++#define QCA953X_GMAC_REG_ETH_CFG              0x00
++
++#define QCA953X_ETH_CFG_SW_ONLY_MODE          BIT(6)
++#define QCA953X_ETH_CFG_SW_PHY_SWAP           BIT(7)
++#define QCA953X_ETH_CFG_SW_APB_ACCESS         BIT(9)
++#define QCA953X_ETH_CFG_SW_ACC_MSB_FIRST      BIT(13)
++
++/*
+  * QCA955X GMAC Interface
+  */
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -32,6 +32,7 @@ enum ath79_soc_type {
+       ATH79_SOC_AR9341,
+       ATH79_SOC_AR9342,
+       ATH79_SOC_AR9344,
++      ATH79_SOC_QCA9533,
+       ATH79_SOC_QCA9556,
+       ATH79_SOC_QCA9558,
+ };
+@@ -100,6 +101,16 @@ static inline int soc_is_ar934x(void)
+       return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
+ }
++static inline int soc_is_qca9533(void)
++{
++      return ath79_soc == ATH79_SOC_QCA9533;
++}
++
++static inline int soc_is_qca953x(void)
++{
++      return soc_is_qca9533();
++}
++
+ static inline int soc_is_qca9556(void)
+ {
+       return ath79_soc == ATH79_SOC_QCA9556;
diff --git a/target/linux/ar71xx/patches-4.9/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.9/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch
new file mode 100644 (file)
index 0000000..dafac99
--- /dev/null
@@ -0,0 +1,717 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -113,6 +113,12 @@ config SOC_QCA955X
+       select PCI_AR724X if PCI
+       def_bool n
++config SOC_QCA956X
++      select USB_ARCH_HAS_EHCI
++      select HW_HAS_PCI
++      select PCI_AR724X if PCI
++      def_bool n
++
+ config ATH79_DEV_M25P80
+       select ATH79_DEV_SPI
+       def_bool n
+@@ -147,7 +153,7 @@ config ATH79_DEV_USB
+       def_bool n
+ config ATH79_DEV_WMAC
+-      depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X)
++      depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X || SOC_QCA956X)
+       def_bool n
+ config ATH79_NVRAM
+--- a/arch/mips/ath79/clock.c
++++ b/arch/mips/ath79/clock.c
+@@ -526,6 +526,100 @@ static void __init qca955x_clocks_init(v
+       clk_add_alias("uart", NULL, "ref", NULL);
+ }
++static void __init qca956x_clocks_init(void)
++{
++      unsigned long ref_rate;
++      unsigned long cpu_rate;
++      unsigned long ddr_rate;
++      unsigned long ahb_rate;
++      u32 pll, out_div, ref_div, nint, hfrac, lfrac, clk_ctrl, postdiv;
++      u32 cpu_pll, ddr_pll;
++      u32 bootstrap;
++
++      bootstrap = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP);
++      if (bootstrap & QCA956X_BOOTSTRAP_REF_CLK_40)
++              ref_rate = 40 * 1000 * 1000;
++      else
++              ref_rate = 25 * 1000 * 1000;
++
++      pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG);
++      out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
++                QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
++      ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
++                QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
++
++      pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG);
++      nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
++             QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
++      hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
++             QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK;
++      lfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT) &
++             QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK;
++
++      cpu_pll = nint * ref_rate / ref_div;
++      cpu_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
++      cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
++      cpu_pll /= (1 << out_div);
++
++      pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG);
++      out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
++                QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
++      ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
++                QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
++      pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG);
++      nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
++             QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
++      hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
++             QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK;
++      lfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT) &
++             QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK;
++
++      ddr_pll = nint * ref_rate / ref_div;
++      ddr_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
++      ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
++      ddr_pll /= (1 << out_div);
++
++      clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG);
++
++      postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
++                QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
++
++      if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
++              cpu_rate = ref_rate;
++      else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL)
++              cpu_rate = ddr_pll / (postdiv + 1);
++      else
++              cpu_rate = cpu_pll / (postdiv + 1);
++
++      postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
++                QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
++
++      if (clk_ctrl & QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
++              ddr_rate = ref_rate;
++      else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL)
++              ddr_rate = cpu_pll / (postdiv + 1);
++      else
++              ddr_rate = ddr_pll / (postdiv + 1);
++
++      postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
++                QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
++
++      if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
++              ahb_rate = ref_rate;
++      else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
++              ahb_rate = ddr_pll / (postdiv + 1);
++      else
++              ahb_rate = cpu_pll / (postdiv + 1);
++
++      ath79_add_sys_clkdev("ref", ref_rate);
++      ath79_add_sys_clkdev("cpu", cpu_rate);
++      ath79_add_sys_clkdev("ddr", ddr_rate);
++      ath79_add_sys_clkdev("ahb", ahb_rate);
++
++      clk_add_alias("wdt", NULL, "ref", NULL);
++      clk_add_alias("uart", NULL, "ref", NULL);
++}
++
+ void __init ath79_clocks_init(void)
+ {
+       if (soc_is_ar71xx())
+@@ -540,6 +634,8 @@ void __init ath79_clocks_init(void)
+               qca953x_clocks_init();
+       else if (soc_is_qca955x())
+               qca955x_clocks_init();
++      else if (soc_is_qca956x() || soc_is_tp9343())
++              qca956x_clocks_init();
+       else
+               BUG();
+ }
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -107,6 +107,8 @@ void ath79_device_reset_set(u32 mask)
+               reg = QCA953X_RESET_REG_RESET_MODULE;
+       else if (soc_is_qca955x())
+               reg = QCA955X_RESET_REG_RESET_MODULE;
++      else if (soc_is_qca956x() || soc_is_tp9343())
++              reg = QCA956X_RESET_REG_RESET_MODULE;
+       else
+               panic("Reset register not defined for this SOC");
+@@ -137,6 +139,8 @@ void ath79_device_reset_clear(u32 mask)
+               reg = QCA953X_RESET_REG_RESET_MODULE;
+       else if (soc_is_qca955x())
+               reg = QCA955X_RESET_REG_RESET_MODULE;
++      else if (soc_is_qca956x() || soc_is_tp9343())
++              reg = QCA956X_RESET_REG_RESET_MODULE;
+       else
+               panic("Reset register not defined for this SOC");
+@@ -163,6 +167,8 @@ u32 ath79_device_reset_get(u32 mask)
+               reg = AR933X_RESET_REG_RESET_MODULE;
+       else if (soc_is_ar934x())
+               reg = AR934X_RESET_REG_RESET_MODULE;
++      else if (soc_is_qca956x() || soc_is_tp9343())
++              reg = QCA956X_RESET_REG_RESET_MODULE;
+       else
+               BUG();
+--- a/arch/mips/ath79/dev-common.c
++++ b/arch/mips/ath79/dev-common.c
+@@ -95,7 +95,9 @@ void __init ath79_register_uart(void)
+           soc_is_ar913x() ||
+           soc_is_ar934x() ||
+           soc_is_qca953x() ||
+-          soc_is_qca955x()) {
++          soc_is_qca955x() ||
++          soc_is_qca956x() ||
++          soc_is_tp9343()) {
+               ath79_uart_data[0].uartclk = uart_clk_rate;
+               platform_device_register(&ath79_uart_device);
+       } else if (soc_is_ar933x()) {
+@@ -164,6 +166,9 @@ void __init ath79_gpio_init(void)
+       } else if (soc_is_qca955x()) {
+               ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
+               ath79_gpio_pdata.oe_inverted = 1;
++      } else if (soc_is_qca956x() || soc_is_tp9343()) {
++              ath79_gpio_pdata.ngpios = QCA956X_GPIO_COUNT;
++              ath79_gpio_pdata.oe_inverted = 1;
+       } else {
+               BUG();
+       }
+--- a/arch/mips/ath79/dev-usb.c
++++ b/arch/mips/ath79/dev-usb.c
+@@ -296,6 +296,19 @@ static void __init qca955x_usb_setup(voi
+                          &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
+ }
++static void __init qca956x_usb_setup(void)
++{
++      ath79_usb_register("ehci-platform", 0,
++                         QCA956X_EHCI0_BASE, QCA956X_EHCI_SIZE,
++                         ATH79_IP3_IRQ(0),
++                         &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
++
++      ath79_usb_register("ehci-platform", 1,
++                         QCA956X_EHCI1_BASE, QCA956X_EHCI_SIZE,
++                         ATH79_IP3_IRQ(1),
++                         &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
++}
++
+ void __init ath79_register_usb(void)
+ {
+       if (soc_is_ar71xx())
+@@ -314,6 +327,8 @@ void __init ath79_register_usb(void)
+               qca953x_usb_setup();
+       else if (soc_is_qca955x())
+               qca955x_usb_setup();
++      else if (soc_is_qca956x())
++              qca956x_usb_setup();
+       else
+               BUG();
+ }
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -200,6 +200,26 @@ static void qca955x_wmac_setup(void)
+ #define AR93XX_OTP_READ_DATA \
+       (soc_is_ar934x() ? AR934X_OTP_READ_DATA : AR9300_OTP_READ_DATA)
++static void qca956x_wmac_setup(void)
++{
++      u32 t;
++
++      ath79_wmac_device.name = "qca956x_wmac";
++
++      ath79_wmac_resources[0].start = QCA956X_WMAC_BASE;
++      ath79_wmac_resources[0].end = QCA956X_WMAC_BASE + QCA956X_WMAC_SIZE - 1;
++      ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
++      ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
++
++      t = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP);
++      if (t & QCA956X_BOOTSTRAP_REF_CLK_40)
++              ath79_wmac_data.is_clk_25mhz = false;
++      else
++              ath79_wmac_data.is_clk_25mhz = true;
++
++      ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
++}
++
+ static bool __init
+ ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
+ {
+@@ -403,6 +423,8 @@ void __init ath79_register_wmac(u8 *cal_
+               qca953x_wmac_setup();
+       else if (soc_is_qca955x())
+               qca955x_wmac_setup();
++      else if (soc_is_qca956x() || soc_is_tp9343())
++              qca956x_wmac_setup();
+       else
+               BUG();
+--- a/arch/mips/ath79/early_printk.c
++++ b/arch/mips/ath79/early_printk.c
+@@ -120,6 +120,8 @@ static void prom_putchar_init(void)
+       case REV_ID_MAJOR_QCA9533_V2:
+       case REV_ID_MAJOR_QCA9556:
+       case REV_ID_MAJOR_QCA9558:
++      case REV_ID_MAJOR_TP9343:
++      case REV_ID_MAJOR_QCA956X:
+               _prom_putchar = prom_putchar_ar71xx;
+               break;
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -31,7 +31,10 @@ static void __iomem *ath79_gpio_get_func
+           soc_is_ar913x() ||
+           soc_is_ar933x())
+               reg = AR71XX_GPIO_REG_FUNC;
+-      else if (soc_is_ar934x() || soc_is_qca953x())
++      else if (soc_is_ar934x() ||
++               soc_is_qca953x() ||
++               soc_is_qca956x() ||
++               soc_is_tp9343())
+               reg = AR934X_GPIO_REG_FUNC;
+       else
+               BUG();
+@@ -64,7 +67,7 @@ void __init ath79_gpio_output_select(uns
+       unsigned int reg;
+       u32 t, s;
+-      BUG_ON(!soc_is_ar934x() && !soc_is_qca953x());
++      BUG_ON(!soc_is_ar934x() && !soc_is_qca953x() && !soc_is_qca956x());
+       if (gpio >= AR934X_GPIO_COUNT)
+               return;
+--- a/arch/mips/ath79/irq.c
++++ b/arch/mips/ath79/irq.c
+@@ -156,6 +156,87 @@ static void qca955x_irq_init(void)
+       irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
+ }
++static void qca956x_ip2_irq_dispatch(struct irq_desc *desc)
++{
++      u32 status;
++
++      status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS);
++      status &= QCA956X_EXT_INT_PCIE_RC1_ALL | QCA956X_EXT_INT_WMAC_ALL;
++
++      if (status == 0) {
++              spurious_interrupt();
++              return;
++      }
++
++      if (status & QCA956X_EXT_INT_PCIE_RC1_ALL) {
++              /* TODO: flush DDR? */
++              generic_handle_irq(ATH79_IP2_IRQ(0));
++      }
++
++      if (status & QCA956X_EXT_INT_WMAC_ALL) {
++              /* TODO: flsuh DDR? */
++              generic_handle_irq(ATH79_IP2_IRQ(1));
++      }
++}
++
++static void qca956x_ip3_irq_dispatch(struct irq_desc *desc)
++{
++      u32 status;
++
++      status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS);
++      status &= QCA956X_EXT_INT_PCIE_RC2_ALL |
++                QCA956X_EXT_INT_USB1 | QCA956X_EXT_INT_USB2;
++
++      if (status == 0) {
++              spurious_interrupt();
++              return;
++      }
++
++      if (status & QCA956X_EXT_INT_USB1) {
++              /* TODO: flush DDR? */
++              generic_handle_irq(ATH79_IP3_IRQ(0));
++      }
++
++      if (status & QCA956X_EXT_INT_USB2) {
++              /* TODO: flush DDR? */
++              generic_handle_irq(ATH79_IP3_IRQ(1));
++      }
++
++      if (status & QCA956X_EXT_INT_PCIE_RC2_ALL) {
++              /* TODO: flush DDR? */
++              generic_handle_irq(ATH79_IP3_IRQ(2));
++      }
++}
++
++static void qca956x_enable_timer_cb(void) {
++      u32 misc;
++
++      misc = ath79_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE);
++      misc |= MISC_INT_MIPS_SI_TIMERINT_MASK;
++      ath79_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE, misc);
++}
++
++static void qca956x_irq_init(void)
++{
++      int i;
++
++      for (i = ATH79_IP2_IRQ_BASE;
++           i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
++              irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
++
++      irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch);
++
++      for (i = ATH79_IP3_IRQ_BASE;
++           i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
++              irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
++
++      irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch);
++
++      /* QCA956x timer init workaround has to be applied right before setting
++       * up the clock. Else, there will be no jiffies */
++      late_time_init = &qca956x_enable_timer_cb;
++}
++
+ void __init arch_init_irq(void)
+ {
+       unsigned irq_wb_chan2 = -1;
+@@ -183,7 +264,9 @@ void __init arch_init_irq(void)
+                soc_is_ar933x() ||
+                soc_is_ar934x() ||
+                soc_is_qca953x() ||
+-               soc_is_qca955x())
++               soc_is_qca955x() ||
++               soc_is_qca956x() ||
++               soc_is_tp9343())
+               misc_is_ar71xx = false;
+       else
+               BUG();
+@@ -197,4 +280,6 @@ void __init arch_init_irq(void)
+               qca953x_irq_init();
+       else if (soc_is_qca955x())
+               qca955x_irq_init();
++      else if (soc_is_qca956x() || soc_is_tp9343())
++              qca956x_irq_init();
+ }
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -68,6 +68,21 @@ static const struct ath79_pci_irq qca955
+       },
+ };
++static const struct ath79_pci_irq qca956x_pci_irq_map[] __initconst = {
++      {
++              .bus    = 0,
++              .slot   = 0,
++              .pin    = 1,
++              .irq    = ATH79_PCI_IRQ(0),
++      },
++      {
++              .bus    = 1,
++              .slot   = 0,
++              .pin    = 1,
++              .irq    = ATH79_PCI_IRQ(1),
++      },
++};
++
+ int __init pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
+ {
+       int irq = -1;
+@@ -86,6 +101,9 @@ int __init pcibios_map_irq(const struct
+               } else if (soc_is_qca955x()) {
+                       ath79_pci_irq_map = qca955x_pci_irq_map;
+                       ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
++              } else if (soc_is_qca956x()) {
++                      ath79_pci_irq_map = qca956x_pci_irq_map;
++                      ath79_pci_nr_irqs = ARRAY_SIZE(qca956x_pci_irq_map);
+               } else {
+                       pr_crit("pci %s: invalid irq map\n",
+                               pci_name((struct pci_dev *) dev));
+@@ -303,6 +321,15 @@ int __init ath79_register_pci(void)
+                                                QCA955X_PCI_MEM_SIZE,
+                                                1,
+                                                ATH79_IP3_IRQ(2));
++      } else if (soc_is_qca956x()) {
++              pdev = ath79_register_pci_ar724x(0,
++                                               QCA956X_PCI_CFG_BASE1,
++                                               QCA956X_PCI_CTRL_BASE1,
++                                               QCA956X_PCI_CRP_BASE1,
++                                               QCA956X_PCI_MEM_BASE1,
++                                               QCA956X_PCI_MEM_SIZE,
++                                               1,
++                                               ATH79_IP3_IRQ(2));
+       } else {
+               /* No PCI support */
+               return -ENODEV;
+--- a/arch/mips/ath79/setup.c
++++ b/arch/mips/ath79/setup.c
+@@ -176,6 +176,18 @@ static void __init ath79_detect_sys_type
+               rev = id & QCA955X_REV_ID_REVISION_MASK;
+               break;
++      case REV_ID_MAJOR_QCA956X:
++              ath79_soc = ATH79_SOC_QCA956X;
++              chip = "956X";
++              rev = id & QCA956X_REV_ID_REVISION_MASK;
++              break;
++
++      case REV_ID_MAJOR_TP9343:
++              ath79_soc = ATH79_SOC_TP9343;
++              chip = "9343";
++              rev = id & QCA956X_REV_ID_REVISION_MASK;
++              break;
++
+       default:
+               panic("ath79: unknown SoC, id:0x%08x", id);
+       }
+@@ -183,9 +195,12 @@ static void __init ath79_detect_sys_type
+       if (ver == 1)
+               ath79_soc_rev = rev;
+-      if (soc_is_qca953x() || soc_is_qca955x())
++      if (soc_is_qca953x() || soc_is_qca955x() || soc_is_qca956x())
+               sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u",
+                       chip, ver, rev);
++      else if (soc_is_tp9343())
++              sprintf(ath79_sys_type, "Qualcomm Atheros TP%s rev %u",
++                      chip, rev);
+       else
+               sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
+       pr_info("SoC: %s\n", ath79_sys_type);
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -143,6 +143,23 @@
+ #define QCA955X_NFC_BASE      0x1b800200
+ #define QCA955X_NFC_SIZE      0xb8
++#define QCA956X_PCI_MEM_BASE1 0x12000000
++#define QCA956X_PCI_MEM_SIZE  0x02000000
++#define QCA956X_PCI_CFG_BASE1 0x16000000
++#define QCA956X_PCI_CFG_SIZE  0x1000
++#define QCA956X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000)
++#define QCA956X_PCI_CRP_SIZE  0x1000
++#define QCA956X_PCI_CTRL_BASE1        (AR71XX_APB_BASE + 0x00280000)
++#define QCA956X_PCI_CTRL_SIZE 0x100
++
++#define QCA956X_WMAC_BASE     (AR71XX_APB_BASE + 0x00100000)
++#define QCA956X_WMAC_SIZE     0x20000
++#define QCA956X_EHCI0_BASE    0x1b000000
++#define QCA956X_EHCI1_BASE    0x1b400000
++#define QCA956X_EHCI_SIZE     0x200
++#define QCA956X_GMAC_BASE     (AR71XX_APB_BASE + 0x00070000)
++#define QCA956X_GMAC_SIZE     0x64
++
+ #define AR9300_OTP_BASE               0x14000
+ #define AR9300_OTP_STATUS     0x15f18
+ #define AR9300_OTP_STATUS_TYPE                0x7
+@@ -152,6 +169,13 @@
+ #define AR9300_OTP_READ_DATA  0x15f1c
+ /*
++ * Hidden Registers
++ */
++#define QCA956X_DAM_RESET_OFFSET      0xb90001bc
++#define QCA956X_DAM_RESET_SIZE                0x4
++#define QCA956X_INLINE_CHKSUM_ENG     BIT(27)
++
++/*
+  * DDR_CTRL block
+  */
+ #define AR71XX_DDR_REG_PCI_WIN0               0x7c
+@@ -385,6 +409,49 @@
+ #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL               BIT(21)
+ #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL               BIT(24)
++#define QCA956X_PLL_CPU_CONFIG_REG                    0x00
++#define QCA956X_PLL_CPU_CONFIG1_REG                   0x04
++#define QCA956X_PLL_DDR_CONFIG_REG                    0x08
++#define QCA956X_PLL_DDR_CONFIG1_REG                   0x0c
++#define QCA956X_PLL_CLK_CTRL_REG                      0x10
++
++#define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT           12
++#define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK            0x1f
++#define QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT           19
++#define QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK            0x7
++
++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT         0
++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK          0x1f
++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT         5
++#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK          0x1fff
++#define QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT            18
++#define QCA956X_PLL_CPU_CONFIG1_NINT_MASK             0x1ff
++
++#define QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT           16
++#define QCA956X_PLL_DDR_CONFIG_REFDIV_MASK            0x1f
++#define QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT           23
++#define QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK            0x7
++
++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT         0
++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK          0x1f
++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT         5
++#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK          0x1fff
++#define QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT            18
++#define QCA956X_PLL_DDR_CONFIG1_NINT_MASK             0x1ff
++
++#define QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS           BIT(2)
++#define QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS           BIT(3)
++#define QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS           BIT(4)
++#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT               5
++#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK                0x1f
++#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT               10
++#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK                0x1f
++#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT               15
++#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK                0x1f
++#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL   BIT(20)
++#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL   BIT(21)
++#define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL               BIT(24)
++
+ /*
+  * USB_CONFIG block
+  */
+@@ -432,6 +499,11 @@
+ #define QCA955X_RESET_REG_BOOTSTRAP           0xb0
+ #define QCA955X_RESET_REG_EXT_INT_STATUS      0xac
++#define QCA956X_RESET_REG_RESET_MODULE                0x1c
++#define QCA956X_RESET_REG_BOOTSTRAP           0xb0
++#define QCA956X_RESET_REG_EXT_INT_STATUS      0xac
++
++#define MISC_INT_MIPS_SI_TIMERINT_MASK        BIT(28)
+ #define MISC_INT_ETHSW                        BIT(12)
+ #define MISC_INT_TIMER4                       BIT(10)
+ #define MISC_INT_TIMER3                       BIT(9)
+@@ -606,6 +678,8 @@
+ #define QCA955X_BOOTSTRAP_REF_CLK_40  BIT(4)
++#define QCA956X_BOOTSTRAP_REF_CLK_40  BIT(2)
++
+ #define AR934X_PCIE_WMAC_INT_WMAC_MISC                BIT(0)
+ #define AR934X_PCIE_WMAC_INT_WMAC_TX          BIT(1)
+ #define AR934X_PCIE_WMAC_INT_WMAC_RXLP                BIT(2)
+@@ -673,6 +747,37 @@
+        QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
+        QCA955X_EXT_INT_PCIE_RC2_INT3)
++#define QCA956X_EXT_INT_WMAC_MISC             BIT(0)
++#define QCA956X_EXT_INT_WMAC_TX                       BIT(1)
++#define QCA956X_EXT_INT_WMAC_RXLP             BIT(2)
++#define QCA956X_EXT_INT_WMAC_RXHP             BIT(3)
++#define QCA956X_EXT_INT_PCIE_RC1              BIT(4)
++#define QCA956X_EXT_INT_PCIE_RC1_INT0         BIT(5)
++#define QCA956X_EXT_INT_PCIE_RC1_INT1         BIT(6)
++#define QCA956X_EXT_INT_PCIE_RC1_INT2         BIT(7)
++#define QCA956X_EXT_INT_PCIE_RC1_INT3         BIT(8)
++#define QCA956X_EXT_INT_PCIE_RC2              BIT(12)
++#define QCA956X_EXT_INT_PCIE_RC2_INT0         BIT(13)
++#define QCA956X_EXT_INT_PCIE_RC2_INT1         BIT(14)
++#define QCA956X_EXT_INT_PCIE_RC2_INT2         BIT(15)
++#define QCA956X_EXT_INT_PCIE_RC2_INT3         BIT(16)
++#define QCA956X_EXT_INT_USB1                  BIT(24)
++#define QCA956X_EXT_INT_USB2                  BIT(28)
++
++#define QCA956X_EXT_INT_WMAC_ALL \
++      (QCA956X_EXT_INT_WMAC_MISC | QCA956X_EXT_INT_WMAC_TX | \
++       QCA956X_EXT_INT_WMAC_RXLP | QCA956X_EXT_INT_WMAC_RXHP)
++
++#define QCA956X_EXT_INT_PCIE_RC1_ALL \
++      (QCA956X_EXT_INT_PCIE_RC1 | QCA956X_EXT_INT_PCIE_RC1_INT0 | \
++       QCA956X_EXT_INT_PCIE_RC1_INT1 | QCA956X_EXT_INT_PCIE_RC1_INT2 | \
++       QCA956X_EXT_INT_PCIE_RC1_INT3)
++
++#define QCA956X_EXT_INT_PCIE_RC2_ALL \
++      (QCA956X_EXT_INT_PCIE_RC2 | QCA956X_EXT_INT_PCIE_RC2_INT0 | \
++       QCA956X_EXT_INT_PCIE_RC2_INT1 | QCA956X_EXT_INT_PCIE_RC2_INT2 | \
++       QCA956X_EXT_INT_PCIE_RC2_INT3)
++
+ #define REV_ID_MAJOR_MASK             0xfff0
+ #define REV_ID_MAJOR_AR71XX           0x00a0
+ #define REV_ID_MAJOR_AR913X           0x00b0
+@@ -688,6 +793,8 @@
+ #define REV_ID_MAJOR_QCA9533_V2               0x0160
+ #define REV_ID_MAJOR_QCA9556          0x0130
+ #define REV_ID_MAJOR_QCA9558          0x1130
++#define REV_ID_MAJOR_TP9343           0x0150
++#define REV_ID_MAJOR_QCA956X          0x1150
+ #define AR71XX_REV_ID_MINOR_MASK      0x3
+ #define AR71XX_REV_ID_MINOR_AR7130    0x0
+@@ -712,6 +819,8 @@
+ #define QCA955X_REV_ID_REVISION_MASK  0xf
++#define QCA956X_REV_ID_REVISION_MASK  0xf
++
+ /*
+  * SPI block
+  */
+@@ -784,6 +893,19 @@
+ #define QCA955X_GPIO_REG_OUT_FUNC5    0x40
+ #define QCA955X_GPIO_REG_FUNC         0x6c
++#define QCA956X_GPIO_REG_OUT_FUNC0    0x2c
++#define QCA956X_GPIO_REG_OUT_FUNC1    0x30
++#define QCA956X_GPIO_REG_OUT_FUNC2    0x34
++#define QCA956X_GPIO_REG_OUT_FUNC3    0x38
++#define QCA956X_GPIO_REG_OUT_FUNC4    0x3c
++#define QCA956X_GPIO_REG_OUT_FUNC5    0x40
++#define QCA956X_GPIO_REG_IN_ENABLE0   0x44
++#define QCA956X_GPIO_REG_IN_ENABLE3   0x50
++#define QCA956X_GPIO_REG_FUNC         0x6c
++
++#define QCA956X_GPIO_OUT_MUX_GE0_MDO  32
++#define QCA956X_GPIO_OUT_MUX_GE0_MDC  33
++
+ #define AR71XX_GPIO_COUNT             16
+ #define AR7240_GPIO_COUNT             18
+ #define AR7241_GPIO_COUNT             20
+@@ -792,6 +914,7 @@
+ #define AR934X_GPIO_COUNT             23
+ #define QCA953X_GPIO_COUNT            18
+ #define QCA955X_GPIO_COUNT            24
++#define QCA956X_GPIO_COUNT            23
+ /*
+  * SRIF block
+--- a/arch/mips/include/asm/mach-ath79/ath79.h
++++ b/arch/mips/include/asm/mach-ath79/ath79.h
+@@ -35,6 +35,8 @@ enum ath79_soc_type {
+       ATH79_SOC_QCA9533,
+       ATH79_SOC_QCA9556,
+       ATH79_SOC_QCA9558,
++      ATH79_SOC_TP9343,
++      ATH79_SOC_QCA956X,
+ };
+ extern enum ath79_soc_type ath79_soc;
+@@ -126,6 +128,26 @@ static inline int soc_is_qca955x(void)
+       return soc_is_qca9556() || soc_is_qca9558();
+ }
++static inline int soc_is_tp9343(void)
++{
++      return ath79_soc == ATH79_SOC_TP9343;
++}
++
++static inline int soc_is_qca9561(void)
++{
++      return ath79_soc == ATH79_SOC_QCA956X;
++}
++
++static inline int soc_is_qca9563(void)
++{
++      return ath79_soc == ATH79_SOC_QCA956X;
++}
++
++static inline int soc_is_qca956x(void)
++{
++      return soc_is_qca9561() || soc_is_qca9563();
++}
++
+ void ath79_ddr_wb_flush(unsigned int reg);
+ void ath79_ddr_set_pci_windows(void);
diff --git a/target/linux/ar71xx/patches-4.9/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.9/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch
new file mode 100644 (file)
index 0000000..cab2f6f
--- /dev/null
@@ -0,0 +1,38 @@
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -157,6 +157,10 @@
+ #define QCA956X_EHCI0_BASE    0x1b000000
+ #define QCA956X_EHCI1_BASE    0x1b400000
+ #define QCA956X_EHCI_SIZE     0x200
++#define QCA956X_GMAC_SGMII_BASE       (AR71XX_APB_BASE + 0x00070000)
++#define QCA956X_GMAC_SGMII_SIZE       0x64
++#define QCA956X_PLL_BASE      (AR71XX_APB_BASE + 0x00050000)
++#define QCA956X_PLL_SIZE      0x50
+ #define QCA956X_GMAC_BASE     (AR71XX_APB_BASE + 0x00070000)
+ #define QCA956X_GMAC_SIZE     0x64
+@@ -414,6 +418,7 @@
+ #define QCA956X_PLL_DDR_CONFIG_REG                    0x08
+ #define QCA956X_PLL_DDR_CONFIG1_REG                   0x0c
+ #define QCA956X_PLL_CLK_CTRL_REG                      0x10
++#define QCA956X_PLL_ETH_XMII_CONTROL_REG              0x30
+ #define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT           12
+ #define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK            0x1f
+@@ -1196,4 +1201,16 @@
+ #define QCA955X_ETH_CFG_TXE_DELAY_MASK        0x3
+ #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT       20
++/*
++ * QCA956X GMAC Interface
++ */
++
++#define QCA956X_GMAC_REG_ETH_CFG              0x00
++
++#define QCA956X_ETH_CFG_SW_ONLY_MODE          BIT(7)
++#define QCA956X_ETH_CFG_SW_PHY_SWAP               BIT(8)
++#define QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP      BIT(9)
++#define QCA956X_ETH_CFG_SW_APB_ACCESS         BIT(10)
++#define QCA956X_ETH_CFG_SW_ACC_MSB_FIRST      BIT(13)
++
+ #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ar71xx/patches-4.9/630-MIPS-ath79-fix-chained-irq-disable.patch b/target/linux/ar71xx/patches-4.9/630-MIPS-ath79-fix-chained-irq-disable.patch
new file mode 100644 (file)
index 0000000..2b92b88
--- /dev/null
@@ -0,0 +1,106 @@
+--- a/arch/mips/ath79/irq.c
++++ b/arch/mips/ath79/irq.c
+@@ -27,6 +27,9 @@
+ #include "machtypes.h"
++static struct irq_chip ip2_chip;
++static struct irq_chip ip3_chip;
++
+ static void ar934x_ip2_irq_dispatch(struct irq_desc *desc)
+ {
+       u32 status;
+@@ -50,8 +53,7 @@ static void ar934x_ip2_irq_init(void)
+       for (i = ATH79_IP2_IRQ_BASE;
+            i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+-              irq_set_chip_and_handler(i, &dummy_irq_chip,
+-                                       handle_level_irq);
++              irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
+       irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
+ }
+@@ -79,7 +81,7 @@ static void qca953x_irq_init(void)
+       for (i = ATH79_IP2_IRQ_BASE;
+            i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+-              irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
++              irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
+       irq_set_chained_handler(ATH79_CPU_IRQ(2), qca953x_ip2_irq_dispatch);
+ }
+@@ -143,15 +145,13 @@ static void qca955x_irq_init(void)
+       for (i = ATH79_IP2_IRQ_BASE;
+            i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+-              irq_set_chip_and_handler(i, &dummy_irq_chip,
+-                                       handle_level_irq);
++              irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
+       irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch);
+       for (i = ATH79_IP3_IRQ_BASE;
+            i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
+-              irq_set_chip_and_handler(i, &dummy_irq_chip,
+-                                       handle_level_irq);
++              irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq);
+       irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
+ }
+@@ -222,13 +222,13 @@ static void qca956x_irq_init(void)
+       for (i = ATH79_IP2_IRQ_BASE;
+            i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
+-              irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
++              irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
+       irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch);
+       for (i = ATH79_IP3_IRQ_BASE;
+            i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
+-              irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
++              irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq);
+       irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch);
+@@ -237,12 +237,40 @@ static void qca956x_irq_init(void)
+       late_time_init = &qca956x_enable_timer_cb;
+ }
++static void ath79_ip2_disable(struct irq_data *data)
++{
++      disable_irq(ATH79_CPU_IRQ(2));
++}
++
++static void ath79_ip2_enable(struct irq_data *data)
++{
++      enable_irq(ATH79_CPU_IRQ(2));
++}
++
++static void ath79_ip3_disable(struct irq_data *data)
++{
++      disable_irq(ATH79_CPU_IRQ(3));
++}
++
++static void ath79_ip3_enable(struct irq_data *data)
++{
++      enable_irq(ATH79_CPU_IRQ(3));
++}
++
+ void __init arch_init_irq(void)
+ {
+       unsigned irq_wb_chan2 = -1;
+       unsigned irq_wb_chan3 = -1;
+       bool misc_is_ar71xx;
++      ip2_chip = dummy_irq_chip;
++      ip2_chip.irq_disable = ath79_ip2_disable;
++      ip2_chip.irq_enable = ath79_ip2_enable;
++
++      ip3_chip = dummy_irq_chip;
++      ip3_chip.irq_disable = ath79_ip3_disable;
++      ip3_chip.irq_enable = ath79_ip3_enable;
++
+       if (mips_machtype == ATH79_MACH_GENERIC_OF) {
+               irqchip_init();
+               return;
diff --git a/target/linux/ar71xx/patches-4.9/631-MIPS-ath79-wmac-enable-set-led-pin.patch b/target/linux/ar71xx/patches-4.9/631-MIPS-ath79-wmac-enable-set-led-pin.patch
new file mode 100644 (file)
index 0000000..29f7f3d
--- /dev/null
@@ -0,0 +1,24 @@
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -411,6 +411,11 @@ void __init ath79_wmac_set_ext_lna_gpio(
+               ar934x_set_ext_lna_gpio(chain, gpio);
+ }
++void __init ath79_wmac_set_led_pin(int gpio)
++{
++      ath79_wmac_data.led_pin = gpio;
++}
++
+ void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
+ {
+       if (soc_is_ar913x())
+--- a/arch/mips/ath79/dev-wmac.h
++++ b/arch/mips/ath79/dev-wmac.h
+@@ -18,6 +18,7 @@ void ath79_wmac_disable_2ghz(void);
+ void ath79_wmac_disable_5ghz(void);
+ void ath79_wmac_set_tx_gain_buffalo(void);
+ void ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio);
++void ath79_wmac_set_led_pin(int gpio);
+ bool ar93xx_wmac_read_mac_address(u8 *dest);
diff --git a/target/linux/ar71xx/patches-4.9/632-MIPS-ath79-gpio-enable-set-direction.patch b/target/linux/ar71xx/patches-4.9/632-MIPS-ath79-gpio-enable-set-direction.patch
new file mode 100644 (file)
index 0000000..4cf3632
--- /dev/null
@@ -0,0 +1,32 @@
+--- a/arch/mips/ath79/common.h
++++ b/arch/mips/ath79/common.h
+@@ -28,6 +28,7 @@ void ath79_gpio_function_enable(u32 mask
+ void ath79_gpio_function_disable(u32 mask);
+ void ath79_gpio_function_setup(u32 set, u32 clear);
+ void ath79_gpio_output_select(unsigned gpio, u8 val);
++int ath79_gpio_direction_select(unsigned gpio, bool oe);
+ void ath79_gpio_init(void);
+ #endif /* __ATH79_COMMON_H */
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -83,3 +83,19 @@ void __init ath79_gpio_output_select(uns
+       /* flush write */
+       (void) __raw_readl(base + reg);
+ }
++
++int ath79_gpio_direction_select(unsigned gpio, bool oe)
++{
++      void __iomem *base = ath79_gpio_base;
++      bool ieq_1 = (soc_is_ar934x() ||
++                      soc_is_qca953x());
++
++      if ((ieq_1 && oe) || (!ieq_1 && !oe))
++              __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << gpio),
++                              base + AR71XX_GPIO_REG_OE);
++      else
++              __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << gpio),
++                              base + AR71XX_GPIO_REG_OE);
++
++      return 0;
++}
diff --git a/target/linux/ar71xx/patches-4.9/640-MIPS-ath79-add-QCA955x-wmac-reset.patch b/target/linux/ar71xx/patches-4.9/640-MIPS-ath79-add-QCA955x-wmac-reset.patch
new file mode 100644 (file)
index 0000000..d7f4536
--- /dev/null
@@ -0,0 +1,82 @@
+--- a/arch/mips/ath79/common.c
++++ b/arch/mips/ath79/common.c
+@@ -38,7 +38,7 @@ unsigned int ath79_soc_rev;
+ void __iomem *ath79_pll_base;
+ void __iomem *ath79_reset_base;
+ EXPORT_SYMBOL_GPL(ath79_reset_base);
+-static void __iomem *ath79_ddr_base;
++void __iomem *ath79_ddr_base;
+ static void __iomem *ath79_ddr_wb_flush_base;
+ static void __iomem *ath79_ddr_pci_win_base;
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -32,7 +32,7 @@
+ #define AR71XX_SPI_SIZE               0x01000000
+ #define AR71XX_DDR_CTRL_BASE  (AR71XX_APB_BASE + 0x00000000)
+-#define AR71XX_DDR_CTRL_SIZE  0x100
++#define AR71XX_DDR_CTRL_SIZE  0x200
+ #define AR71XX_UART_BASE      (AR71XX_APB_BASE + 0x00020000)
+ #define AR71XX_UART_SIZE      0x100
+ #define AR71XX_USB_CTRL_BASE  (AR71XX_APB_BASE + 0x00030000)
+@@ -229,6 +229,9 @@
+ #define QCA953X_DDR_REG_FLUSH_PCIE    0xa8
+ #define QCA953X_DDR_REG_FLUSH_WMAC    0xac
++#define QCA955X_DDR_CTL_CONFIG                0x108
++#define QCA955X_DDR_CTL_CONFIG_ACT_WMAC       BIT(23)
++
+ /*
+  * PLL block
+  */
+--- a/arch/mips/ath79/dev-wmac.c
++++ b/arch/mips/ath79/dev-wmac.c
+@@ -170,6 +170,27 @@ static void qca953x_wmac_setup(void)
+       ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
+ }
++static int ar955x_wmac_reset(void)
++{
++      int i;
++
++      /* Try to wait for WMAC DDR activity to stop */
++      for (i = 0; i < 10; i++) {
++              if (!(__raw_readl(ath79_ddr_base + QCA955X_DDR_CTL_CONFIG) &
++                    QCA955X_DDR_CTL_CONFIG_ACT_WMAC))
++                      break;
++
++              udelay(10);
++      }
++
++      ath79_device_reset_set(QCA955X_RESET_RTC);
++      udelay(10);
++      ath79_device_reset_clear(QCA955X_RESET_RTC);
++      udelay(10);
++
++      return 0;
++}
++
+ static void qca955x_wmac_setup(void)
+ {
+       u32 t;
+@@ -186,6 +207,8 @@ static void qca955x_wmac_setup(void)
+               ath79_wmac_data.is_clk_25mhz = false;
+       else
+               ath79_wmac_data.is_clk_25mhz = true;
++
++      ath79_wmac_data.external_reset = ar955x_wmac_reset;
+ }
+ #define AR93XX_WMAC_SIZE \
+--- a/arch/mips/ath79/common.h
++++ b/arch/mips/ath79/common.h
+@@ -19,6 +19,8 @@
+ #define ATH79_MEM_SIZE_MIN    (2 * 1024 * 1024)
+ #define ATH79_MEM_SIZE_MAX    (256 * 1024 * 1024)
++extern void __iomem *ath79_ddr_base;
++
+ void ath79_clocks_init(void);
+ unsigned long ath79_get_sys_clk_rate(const char *id);
diff --git a/target/linux/ar71xx/patches-4.9/700-MIPS-ath79-add-openwrt-Kconfig.patch b/target/linux/ar71xx/patches-4.9/700-MIPS-ath79-add-openwrt-Kconfig.patch
new file mode 100644 (file)
index 0000000..5d4b180
--- /dev/null
@@ -0,0 +1,11 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -82,6 +82,8 @@ config ATH79_MACH_UBNT_XM
+         Say 'Y' here if you want your kernel to support the
+         Ubiquiti Networks XM (rev 1.0) board.
++source "arch/mips/ath79/Kconfig.openwrt"
++
+ endmenu
+ config SOC_AR71XX
diff --git a/target/linux/ar71xx/patches-4.9/701-MIPS-ath79-add-routerboard-detection.patch b/target/linux/ar71xx/patches-4.9/701-MIPS-ath79-add-routerboard-detection.patch
new file mode 100644 (file)
index 0000000..cd91ac3
--- /dev/null
@@ -0,0 +1,30 @@
+--- a/arch/mips/ath79/prom.c
++++ b/arch/mips/ath79/prom.c
+@@ -136,6 +136,27 @@ void __init prom_init(void)
+               initrd_end = initrd_start + fw_getenvl("initrd_size");
+       }
+ #endif
++
++      if (strstr(arcs_cmdline, "board=750Gr3") ||
++          strstr(arcs_cmdline, "board=750i") ||
++          strstr(arcs_cmdline, "board=750-hb") ||
++          strstr(arcs_cmdline, "board=411") ||
++          strstr(arcs_cmdline, "board=433") ||
++          strstr(arcs_cmdline, "board=435") ||
++          strstr(arcs_cmdline, "board=450") ||
++          strstr(arcs_cmdline, "board=493") ||
++          strstr(arcs_cmdline, "board=951G") ||
++          strstr(arcs_cmdline, "board=H951L") ||
++          strstr(arcs_cmdline, "board=952-hb") ||
++          strstr(arcs_cmdline, "board=953gs") ||
++          strstr(arcs_cmdline, "board=962") ||
++          strstr(arcs_cmdline, "board=lhg") ||
++          strstr(arcs_cmdline, "board=map-hb") ||
++          strstr(arcs_cmdline, "board=2011L") ||
++          strstr(arcs_cmdline, "board=2011r") ||
++          strstr(arcs_cmdline, "board=711Gr100") ||
++          strstr(arcs_cmdline, "board=922gs"))
++              ath79_prom_append_cmdline("console", "ttyS0,115200");
+ }
+ void __init prom_free_prom_memory(void)
diff --git a/target/linux/ar71xx/patches-4.9/739-MIPS-ath79-add-gpio-func-register-for-QCA955x-SoC.patch b/target/linux/ar71xx/patches-4.9/739-MIPS-ath79-add-gpio-func-register-for-QCA955x-SoC.patch
new file mode 100644 (file)
index 0000000..a65f7d9
--- /dev/null
@@ -0,0 +1,38 @@
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -33,6 +33,7 @@ static void __iomem *ath79_gpio_get_func
+               reg = AR71XX_GPIO_REG_FUNC;
+       else if (soc_is_ar934x() ||
+                soc_is_qca953x() ||
++               soc_is_qca955x() ||
+                soc_is_qca956x() ||
+                soc_is_tp9343())
+               reg = AR934X_GPIO_REG_FUNC;
+@@ -64,15 +65,21 @@ void ath79_gpio_function_disable(u32 mas
+ void __init ath79_gpio_output_select(unsigned gpio, u8 val)
+ {
+       void __iomem *base = ath79_gpio_base;
+-      unsigned int reg;
++      unsigned int reg, reg_base;
+       u32 t, s;
+-      BUG_ON(!soc_is_ar934x() && !soc_is_qca953x() && !soc_is_qca956x());
+-
+-      if (gpio >= AR934X_GPIO_COUNT)
+-              return;
++      if (soc_is_ar934x())
++              reg_base = AR934X_GPIO_REG_OUT_FUNC0;
++      else if (soc_is_qca953x())
++              reg_base = QCA953X_GPIO_REG_OUT_FUNC0;
++      else if (soc_is_qca955x())
++              reg_base = QCA955X_GPIO_REG_OUT_FUNC0;
++      else if (soc_is_qca956x())
++              reg_base = QCA956X_GPIO_REG_OUT_FUNC0;
++      else
++              BUG();
+-      reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4);
++      reg = reg_base + 4 * (gpio / 4);
+       s = 8 * (gpio % 4);
+       t = __raw_readl(base + reg);
diff --git a/target/linux/ar71xx/patches-4.9/740-MIPS-ath79-add-PCI-for-QCA953x-SoC.patch b/target/linux/ar71xx/patches-4.9/740-MIPS-ath79-add-PCI-for-QCA953x-SoC.patch
new file mode 100644 (file)
index 0000000..a57351e
--- /dev/null
@@ -0,0 +1,44 @@
+--- a/arch/mips/ath79/pci.c
++++ b/arch/mips/ath79/pci.c
+@@ -53,6 +53,15 @@ static const struct ath79_pci_irq ar724x
+       }
+ };
++static const struct ath79_pci_irq qca953x_pci_irq_map[] __initconst = {
++      {
++              .bus    = 0,
++              .slot   = 0,
++              .pin    = 1,
++              .irq    = ATH79_PCI_IRQ(0),
++      },
++};
++
+ static const struct ath79_pci_irq qca955x_pci_irq_map[] __initconst = {
+       {
+               .bus    = 0,
+@@ -98,6 +107,9 @@ int __init pcibios_map_irq(const struct
+                          soc_is_ar9344()) {
+                       ath79_pci_irq_map = ar724x_pci_irq_map;
+                       ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
++              } else if (soc_is_qca953x()) {
++                      ath79_pci_irq_map = qca953x_pci_irq_map;
++                      ath79_pci_nr_irqs = ARRAY_SIZE(qca953x_pci_irq_map);
+               } else if (soc_is_qca955x()) {
+                       ath79_pci_irq_map = qca955x_pci_irq_map;
+                       ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
+@@ -303,6 +315,15 @@ int __init ath79_register_pci(void)
+                                                AR724X_PCI_MEM_SIZE,
+                                                0,
+                                                ATH79_IP2_IRQ(0));
++      } else if (soc_is_qca9533()) {
++              pdev = ath79_register_pci_ar724x(0,
++                                               QCA953X_PCI_CFG_BASE0,
++                                               QCA953X_PCI_CTRL_BASE0,
++                                               QCA953X_PCI_CRP_BASE0,
++                                               QCA953X_PCI_MEM_BASE0,
++                                               QCA953X_PCI_MEM_SIZE,
++                                               0,
++                                               ATH79_IP2_IRQ(0));
+       } else if (soc_is_qca9558()) {
+               pdev = ath79_register_pci_ar724x(0,
+                                                QCA955X_PCI_CFG_BASE0,
diff --git a/target/linux/ar71xx/patches-4.9/818-MIPS-ath79-add-nu801-led-driver.patch b/target/linux/ar71xx/patches-4.9/818-MIPS-ath79-add-nu801-led-driver.patch
new file mode 100644 (file)
index 0000000..337447e
--- /dev/null
@@ -0,0 +1,26 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -606,6 +606,13 @@ config LEDS_IS31FL32XX
+ comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
++config LEDS_NU801
++      tristate "LED driver for NU801 RGB LED"
++      depends on LEDS_CLASS && (ATH79_MACH_MR18 || ATH79_MACH_Z1)
++      help
++        This option enables support for NU801 RGB LED driver chips
++        accessed via GPIO.
++
+ config LEDS_BLINKM
+       tristate "LED support for the BlinkM I2C RGB LED"
+       depends on LEDS_CLASS
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -56,6 +56,7 @@ obj-$(CONFIG_LEDS_ADP5520)           += leds-adp5
+ obj-$(CONFIG_LEDS_DELL_NETBOOKS)      += dell-led.o
+ obj-$(CONFIG_LEDS_MC13783)            += leds-mc13783.o
+ obj-$(CONFIG_LEDS_RB750)              += leds-rb750.o
++obj-$(CONFIG_LEDS_NU801)              += leds-nu801.o
+ obj-$(CONFIG_LEDS_NS2)                        += leds-ns2.o
+ obj-$(CONFIG_LEDS_NETXBIG)            += leds-netxbig.o
+ obj-$(CONFIG_LEDS_ASIC3)              += leds-asic3.o
diff --git a/target/linux/ar71xx/patches-4.9/820-MIPS-ath79-add_gpio_function2_setup.patch b/target/linux/ar71xx/patches-4.9/820-MIPS-ath79-add_gpio_function2_setup.patch
new file mode 100644 (file)
index 0000000..afa7b69
--- /dev/null
@@ -0,0 +1,67 @@
+Add access to the function2 gpio register. This probably has to be
+converted into a pimux driver later on. This is needed for some setup
+functions on the Arduino Yun.
+
+--- a/arch/mips/ath79/common.h
++++ b/arch/mips/ath79/common.h
+@@ -29,6 +29,7 @@ void ath79_ddr_ctrl_init(void);
+ void ath79_gpio_function_enable(u32 mask);
+ void ath79_gpio_function_disable(u32 mask);
+ void ath79_gpio_function_setup(u32 set, u32 clear);
++void ath79_gpio_function2_setup(u32 set, u32 clear);
+ void ath79_gpio_output_select(unsigned gpio, u8 val);
+ int ath79_gpio_direction_select(unsigned gpio, bool oe);
+ void ath79_gpio_init(void);
+--- a/arch/mips/ath79/gpio.c
++++ b/arch/mips/ath79/gpio.c
+@@ -43,6 +43,31 @@ static void __iomem *ath79_gpio_get_func
+       return ath79_gpio_base + reg;
+ }
++static void __iomem *ath79_gpio_get_function2_reg(void)
++{
++      u32 reg = 0;
++
++      if (soc_is_ar71xx() ||
++          soc_is_ar724x() ||
++          soc_is_ar913x() ||
++          soc_is_ar933x())
++              reg = AR71XX_GPIO_REG_FUNC_2;
++      else
++              BUG();
++
++      return ath79_gpio_base + reg;
++}
++
++
++void ath79_gpio_function2_setup(u32 set, u32 clear)
++{
++      void __iomem *reg = ath79_gpio_get_function2_reg();
++
++      __raw_writel((__raw_readl(reg) & ~clear) | set, reg);
++      /* flush write */
++      __raw_readl(reg);
++}
++
+ void ath79_gpio_function_setup(u32 set, u32 clear)
+ {
+       void __iomem *reg = ath79_gpio_get_function_reg();
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -865,6 +865,7 @@
+ #define AR71XX_GPIO_REG_INT_PENDING   0x20
+ #define AR71XX_GPIO_REG_INT_ENABLE    0x24
+ #define AR71XX_GPIO_REG_FUNC          0x28
++#define AR71XX_GPIO_REG_FUNC_2                0x30
+ #define AR934X_GPIO_REG_OUT_FUNC0     0x2c
+ #define AR934X_GPIO_REG_OUT_FUNC1     0x30
+@@ -989,6 +990,8 @@
+ #define AR724X_GPIO_FUNC_UART_EN              BIT(1)
+ #define AR724X_GPIO_FUNC_JTAG_DISABLE         BIT(0)
++#define AR933X_GPIO_FUNC2_JUMPSTART_DISABLE   BIT(9)
++
+ #define AR913X_GPIO_FUNC_WMAC_LED_EN          BIT(22)
+ #define AR913X_GPIO_FUNC_EXP_PORT_CS_EN               BIT(21)
+ #define AR913X_GPIO_FUNC_I2S_REFCLKEN         BIT(20)
diff --git a/target/linux/ar71xx/patches-4.9/900-mdio_bitbang_ignore_ta_value.patch b/target/linux/ar71xx/patches-4.9/900-mdio_bitbang_ignore_ta_value.patch
new file mode 100644 (file)
index 0000000..8f8f349
--- /dev/null
@@ -0,0 +1,32 @@
+--- a/drivers/net/phy/mdio-bitbang.c
++++ b/drivers/net/phy/mdio-bitbang.c
+@@ -155,7 +155,7 @@ static int mdiobb_cmd_addr(struct mdiobb
+ static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
+ {
+       struct mdiobb_ctrl *ctrl = bus->priv;
+-      int ret, i;
++    &nbs