ntiq: make i2c-lantiqi driver compile again
authorHauke Mehrtens <hauke@hauke-m.de>
Sun, 2 Oct 2016 20:12:44 +0000 (22:12 +0200)
committerHauke Mehrtens <hauke@hauke-m.de>
Sun, 2 Oct 2016 22:13:11 +0000 (00:13 +0200)
It missed some changes needed for kernel 4.4. This is only used by the
Falcon SoC and not for the xRX SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
target/linux/lantiq/patches-4.4/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch

index a9ae084..ab2c057 100644 (file)
@@ -82,7 +82,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +#include <linux/platform_device.h>
 +#include <linux/io.h>
 +#include <linux/of_irq.h>
-+#include <linux/of_i2c.h>
 +
 +#include <lantiq_soc.h>
 +#include "i2c-lantiq.h"
@@ -621,7 +620,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +      .functionality  = ltq_i2c_functionality,
 +};
 +
-+static int __devinit ltq_i2c_probe(struct platform_device *pdev)
++static int ltq_i2c_probe(struct platform_device *pdev)
 +{
 +      struct device_node *node = pdev->dev.of_node;
 +      struct ltq_i2c *priv;
@@ -651,6 +650,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +      adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 +      strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name));
 +      adap->algo = &ltq_i2c_algorithm;
++      adap->dev.parent = &pdev->dev;
++      adap->dev.of_node = pdev->dev.of_node;
 +
 +      if (of_property_read_u32(node, "clock-frequency", &priv->i2c_clock)) {
 +              dev_warn(&pdev->dev, "No I2C speed selected, using 100kHz\n");
@@ -660,9 +661,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +      init_completion(&priv->cmd_complete);
 +      mutex_init(&priv->mutex);
 +
-+      priv->membase = devm_request_and_ioremap(&pdev->dev, mmres);
-+      if (priv->membase == NULL)
-+              return -ENOMEM;
++      priv->membase = devm_ioremap_resource(&pdev->dev, mmres);
++      if (IS_ERR(priv->membase))
++              return PTR_ERR(priv->membase);
 +
 +      priv->dev = &pdev->dev;
 +      priv->irq_lb = irqres[0].start;
@@ -739,12 +740,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +              dev_err(&pdev->dev, "can't configure adapter\n");
 +              i2c_del_adapter(adap);
 +              platform_set_drvdata(pdev, NULL);
++              goto out;
 +      } else {
 +              dev_info(&pdev->dev, "version %s\n", DRV_VERSION);
 +      }
 +
-+      of_i2c_register_devices(adap);
-+
 +out:
 +      /* if init failed, we need to deactivate the clock gate */
 +      if (ret)
@@ -753,7 +753,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +      return ret;
 +}
 +
-+static int __devexit ltq_i2c_remove(struct platform_device *pdev)
++static int ltq_i2c_remove(struct platform_device *pdev)
 +{
 +      struct ltq_i2c *priv = platform_get_drvdata(pdev);
 +
@@ -780,7 +780,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
 +
 +static struct platform_driver ltq_i2c_driver = {
 +      .probe  = ltq_i2c_probe,
-+      .remove = __devexit_p(ltq_i2c_remove),
++      .remove = ltq_i2c_remove,
 +      .driver = {
 +              .name   = DRV_NAME,
 +              .owner  = THIS_MODULE,