ath79: make OpenMesh MR900 DTSI more general
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>
Tue, 19 Jan 2021 13:53:36 +0000 (14:53 +0100)
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>
Tue, 19 Jan 2021 20:41:25 +0000 (21:41 +0100)
The OpenMesh MR900 and to-be-added MR1750 family are very similar.
Make the existing MR900 DTSI more general so it can be used for
the MR1750 devices as well.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
target/linux/ath79/dts/qca9558_openmesh_mr.dtsi [new file with mode: 0644]
target/linux/ath79/dts/qca9558_openmesh_mr900-v1.dts
target/linux/ath79/dts/qca9558_openmesh_mr900-v2.dts
target/linux/ath79/dts/qca9558_openmesh_mr900.dtsi [deleted file]

diff --git a/target/linux/ath79/dts/qca9558_openmesh_mr.dtsi b/target/linux/ath79/dts/qca9558_openmesh_mr.dtsi
new file mode 100644 (file)
index 0000000..d51c587
--- /dev/null
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       chosen {
+               /delete-property/ bootargs;
+       };
+
+       aliases {
+               serial0 = &uart;
+               led-boot = &led_power_blue;
+               led-failsafe = &led_power_blue;
+               led-running = &led_power_blue;
+               led-upgrade = &led_power_blue;
+               label-mac-device = &eth0;
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               lan_blue {
+                       label = "blue:lan";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+               };
+
+               led_wifi2g: wifi2g {
+                       label = "blue:wifi2g";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+               };
+
+               status_green {
+                       label = "green:status";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+               };
+
+               status_red {
+                       label = "red:status";
+                       gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+               };
+
+               led_power_blue: power_blue {
+                       label = "blue:power";
+                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+
+               led_wifi5g: wifi5g {
+                       label = "blue:wifi5g";
+                       gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       watchdog {
+               compatible = "linux,wdt-gpio";
+               gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+               hw_algo = "toggle";
+               /* hw_margin_ms is actually 300s but driver limits it to 60s */
+               hw_margin_ms = <60000>;
+               always-running;
+       };
+};
+
+&uart {
+       status = "okay";
+};
+
+&spi {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <40000000>;
+
+               /* partitions are passed via bootloader */
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x040000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "u-boot-env";
+                               reg = <0x040000 0x010000>;
+                       };
+
+                       partition@50000 {
+                               label = "custom";
+                               reg = <0x050000 0x060000>;
+                               read-only;
+                       };
+
+                       partition@b0000 {
+                               label = "inactive";
+                               reg = <0x0b0000 0x7a0000>;
+                       };
+
+                       partition@850000 {
+                               label = "inactive2";
+                               reg = <0x850000 0x7a0000>;
+                       };
+
+                       art: partition@ff0000 {
+                               label = "ART";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy-mask = <0x20>;
+
+       phy5: ethernet-phy@5 {
+               reg = <5>;
+               eee-broken-100tx;
+               eee-broken-1000t;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       pll-data = <0x82000000 0x80000101 0x80001313>;
+
+       mtd-mac-address = <&art 0x0>;
+
+       phy-mode = "rgmii-id";
+       phy-handle = <&phy5>;
+
+       gmac-config {
+               device = <&gmac>;
+               rgmii-enabled = <1>;
+       };
+};
+
+&wmac {
+       status = "okay";
+
+       mtd-cal-data = <&art 0x1000>;
+       mtd-mac-address = <&art 0x0>;
+       mtd-mac-address-increment = <1>;
+};
+
+&pcie0 {
+       status = "okay";
+};
index 96fc985..f7889b0 100644 (file)
@@ -1,8 +1,25 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca9558_openmesh_mr900.dtsi"
+#include "qca9558_openmesh_mr.dtsi"
 
 / {
        compatible = "openmesh,mr900-v1", "qca,qca9558";
        model = "OpenMesh MR900 v1";
 };
+
+&led_wifi2g {
+       linux,default-trigger = "phy0tpt";
+};
+
+&led_wifi5g {
+       linux,default-trigger = "phy1tpt";
+};
+
+&pcie0 {
+       wifi@0,0 {
+               compatible = "pci168c,0033";
+               reg = <0x0000 0 0 0 0>;
+               mtd-mac-address = <&art 0x0>;
+               mtd-mac-address-increment = <16>;
+       };
+};
index 008caae..1f54d21 100644 (file)
@@ -1,8 +1,25 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "qca9558_openmesh_mr900.dtsi"
+#include "qca9558_openmesh_mr.dtsi"
 
 / {
        compatible = "openmesh,mr900-v2", "qca,qca9558";
        model = "OpenMesh MR900 v2";
 };
+
+&led_wifi2g {
+       linux,default-trigger = "phy0tpt";
+};
+
+&led_wifi5g {
+       linux,default-trigger = "phy1tpt";
+};
+
+&pcie0 {
+       wifi@0,0 {
+               compatible = "pci168c,0033";
+               reg = <0x0000 0 0 0 0>;
+               mtd-mac-address = <&art 0x0>;
+               mtd-mac-address-increment = <16>;
+       };
+};
diff --git a/target/linux/ath79/dts/qca9558_openmesh_mr900.dtsi b/target/linux/ath79/dts/qca9558_openmesh_mr900.dtsi
deleted file mode 100644 (file)
index 8c61204..0000000
+++ /dev/null
@@ -1,178 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qca955x.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-       chosen {
-               /delete-property/ bootargs;
-       };
-
-       aliases {
-               serial0 = &uart;
-               led-boot = &led_power_blue;
-               led-failsafe = &led_power_blue;
-               led-running = &led_power_blue;
-               led-upgrade = &led_power_blue;
-               label-mac-device = &eth0;
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               lan_blue {
-                       label = "blue:lan";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-               };
-
-               wifi2g_blue {
-                       label = "blue:wifi2g";
-                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy0tpt";
-               };
-
-               status_green {
-                       label = "green:status";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-               };
-
-               status_red {
-                       label = "red:status";
-                       gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
-               };
-
-               led_power_blue: power_blue {
-                       label = "blue:power";
-                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-
-               wifi5g_blue {
-                       label = "blue:wifi5g";
-                       gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy1tpt";
-               };
-       };
-
-       watchdog {
-               compatible = "linux,wdt-gpio";
-               gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-               hw_algo = "toggle";
-               /* hw_margin_ms is actually 300s but driver limits it to 60s */
-               hw_margin_ms = <60000>;
-               always-running;
-       };
-};
-
-&uart {
-       status = "okay";
-};
-
-&spi {
-       status = "okay";
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <40000000>;
-
-               /* partitions are passed via bootloader */
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x040000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "u-boot-env";
-                               reg = <0x040000 0x010000>;
-                       };
-
-                       partition@50000 {
-                               label = "custom";
-                               reg = <0x050000 0x060000>;
-                               read-only;
-                       };
-
-                       partition@b0000 {
-                               label = "inactive";
-                               reg = <0x0b0000 0x7a0000>;
-                       };
-
-                       partition@850000 {
-                               label = "inactive2";
-                               reg = <0x850000 0x7a0000>;
-                       };
-
-                       art: partition@ff0000 {
-                               label = "ART";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&mdio0 {
-       status = "okay";
-
-       phy-mask = <0x20>;
-
-       phy5: ethernet-phy@5 {
-               reg = <5>;
-               eee-broken-100tx;
-               eee-broken-1000t;
-       };
-};
-
-&eth0 {
-       status = "okay";
-
-       pll-data = <0x82000000 0x80000101 0x80001313>;
-
-       mtd-mac-address = <&art 0x0>;
-
-       phy-mode = "rgmii-id";
-       phy-handle = <&phy5>;
-
-       gmac-config {
-               device = <&gmac>;
-               rgmii-enabled = <1>;
-       };
-};
-
-&wmac {
-       status = "okay";
-
-       mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&art 0x0>;
-       mtd-mac-address-increment = <1>;
-};
-
-&pcie0 {
-       status = "okay";
-
-       wifi@0,0 {
-               compatible = "pci168c,0033";
-               reg = <0x0000 0 0 0 0>;
-               mtd-mac-address = <&art 0x0>;
-               mtd-mac-address-increment = <16>;
-       };
-};