---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -506,6 +506,7 @@
- qcom-apq8084-ifc6540.dtb \
- qcom-apq8084-mtp.dtb \
- qcom-ipq8064-ap148.dtb \
-+ qcom-ipq8064-c2600.dtb \
- qcom-ipq8064-db149.dtb \
- qcom-ipq8064-r7500.dtb \
- qcom-ipq8064-d7800.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
-@@ -0,0 +1,412 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+ model = "TP-Link Archer C2600";
-+ compatible = "tplink,c2600", "qcom,ipq8064";
-+
-+ memory@0 {
-+ reg = <0x42000000 0x1e000000>;
-+ device_type = "memory";
-+ };
-+
-+ reserved-memory {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+ rsvd@41200000 {
-+ reg = <0x41200000 0x300000>;
-+ no-map;
-+ };
-+ };
-+
-+ aliases {
-+ serial0 = &uart4;
-+ mdio-gpio0 = &mdio0;
-+ };
-+
-+ chosen {
-+ linux,stdout-path = "serial0:115200n8";
-+ };
-+
-+ soc {
-+ pinmux@800000 {
-+ i2c4_pins: i2c4_pinmux {
-+ pins = "gpio12", "gpio13";
-+ function = "gsbi4";
-+ bias-disable;
-+ };
-+
-+ spi_pins: spi_pins {
-+ mux {
-+ pins = "gpio18", "gpio19", "gpio21";
-+ function = "gsbi5";
-+ drive-strength = <10>;
-+ bias-none;
-+ };
-+ };
-+
-+ nand_pins: nand_pins {
-+ mux {
-+ pins = "gpio34", "gpio35", "gpio36",
-+ "gpio37", "gpio38", "gpio39",
-+ "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ function = "nand";
-+ drive-strength = <10>;
-+ bias-disable;
-+ };
-+
-+ pullups {
-+ pins = "gpio39";
-+ bias-pull-up;
-+ };
-+
-+ hold {
-+ pins = "gpio40", "gpio41", "gpio42",
-+ "gpio43", "gpio44", "gpio45",
-+ "gpio46", "gpio47";
-+ bias-bus-hold;
-+ };
-+ };
-+
-+ mdio0_pins: mdio0_pins {
-+ mux {
-+ pins = "gpio0", "gpio1";
-+ function = "gpio";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+
-+ rgmii2_pins: rgmii2_pins {
-+ mux {
-+ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+ function = "rgmii2";
-+ drive-strength = <8>;
-+ bias-disable;
-+ };
-+ };
-+ };
-+
-+ gsbi@16300000 {
-+ qcom,mode = <GSBI_PROT_I2C_UART>;
-+ status = "ok";
-+ serial@16340000 {
-+ status = "ok";
-+ };
-+ /*
-+ * The i2c device on gsbi4 should not be enabled.
-+ * On ipq806x designs gsbi4 i2c is meant for exclusive
-+ * RPM usage. Turning this on in kernel manifests as
-+ * i2c failure for the RPM.
-+ */
-+ };
-+
-+ gsbi5: gsbi@1a200000 {
-+ qcom,mode = <GSBI_PROT_SPI>;
-+ status = "ok";
-+
-+ spi4: spi@1a280000 {
-+ status = "ok";
-+ spi-max-frequency = <50000000>;
-+
-+ pinctrl-0 = <&spi_pins>;
-+ pinctrl-names = "default";
-+
-+ cs-gpios = <&qcom_pinmux 20 0>;
-+
-+ flash: m25p80@0 {
-+ compatible = "s25fl256s1";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ spi-max-frequency = <50000000>;
-+ reg = <0>;
-+
-+ SBL1@0 {
-+ label = "SBL1";
-+ reg = <0x0 0x20000>;
-+ read-only;
-+ };
-+ MIBIB@20000 {
-+ label = "MIBIB";
-+ reg = <0x20000 0x20000>;
-+ read-only;
-+ };
-+ SBL2@40000 {
-+ label = "SBL2";
-+ reg = <0x40000 0x20000>;
-+ read-only;
-+ };
-+ SBL3@60000 {
-+ label = "SBL3";
-+ reg = <0x60000 0x30000>;
-+ read-only;
-+ };
-+ DDRCONFIG@90000 {
-+ label = "DDRCONFIG";
-+ reg = <0x90000 0x10000>;
-+ read-only;
-+ };
-+ SSD@a0000 {
-+ label = "SSD";
-+ reg = <0xa0000 0x10000>;
-+ read-only;
-+ };
-+ TZ@b0000 {
-+ label = "TZ";
-+ reg = <0xb0000 0x30000>;
-+ read-only;
-+ };
-+ RPM@e0000 {
-+ label = "RPM";
-+ reg = <0xe0000 0x20000>;
-+ read-only;
-+ };
-+ fs-uboot@100000 {
-+ label = "fs-uboot";
-+ reg = <0x100000 0x70000>;
-+ read-only;
-+ };
-+ uboot-env@170000 {
-+ label = "uboot-env";
-+ reg = <0x170000 0x40000>;
-+ read-only;
-+ };
-+ radio@1b0000 {
-+ label = "radio";
-+ reg = <0x1b0000 0x40000>;
-+ read-only;
-+ };
-+ os-image@1f0000 {
-+ label = "os-image";
-+ reg = <0x1f0000 0x200000>;
-+ };
-+ rootfs@3f0000 {
-+ label = "rootfs";
-+ reg = <0x3f0000 0x1b00000>;
-+ };
-+ defaultmac: default-mac@1ef0000 {
-+ label = "default-mac";
-+ reg = <0x1ef0000 0x00200>;
-+ read-only;
-+ };
-+ pin@1ef0200 {
-+ label = "pin";
-+ reg = <0x1ef0200 0x00200>;
-+ read-only;
-+ };
-+ product-info@1ef0400 {
-+ label = "product-info";
-+ reg = <0x1ef0400 0x0fc00>;
-+ read-only;
-+ };
-+ partition-table@1f00000 {
-+ label = "partition-table";
-+ reg = <0x1f00000 0x10000>;
-+ read-only;
-+ };
-+ soft-version@1f10000 {
-+ label = "soft-version";
-+ reg = <0x1f10000 0x10000>;
-+ read-only;
-+ };
-+ support-list@1f20000 {
-+ label = "support-list";
-+ reg = <0x1f20000 0x10000>;
-+ read-only;
-+ };
-+ profile@1f30000 {
-+ label = "profile";
-+ reg = <0x1f30000 0x10000>;
-+ read-only;
-+ };
-+ default-config@1f40000 {
-+ label = "default-config";
-+ reg = <0x1f40000 0x10000>;
-+ read-only;
-+ };
-+ user-config@1f50000 {
-+ label = "user-config";
-+ reg = <0x1f50000 0x40000>;
-+ read-only;
-+ };
-+ qos-db@1f90000 {
-+ label = "qos-db";
-+ reg = <0x1f90000 0x40000>;
-+ read-only;
-+ };
-+ usb-config@1fd0000 {
-+ label = "usb-config";
-+ reg = <0x1fd0000 0x10000>;
-+ read-only;
-+ };
-+ log@1fe0000 {
-+ label = "log";
-+ reg = <0x1fe0000 0x20000>;
-+ read-only;
-+ };
-+ };
-+ };
-+ };
-+
-+ phy@100f8800 { /* USB3 port 1 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@100f8830 { /* USB3 port 1 SS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8800 { /* USB3 port 0 HS phy */
-+ status = "ok";
-+ };
-+
-+ phy@110f8830 { /* USB3 port 0 SS phy */
-+ status = "ok";
-+ };
-+
-+ usb30@0 {
-+ status = "ok";
-+ };
-+
-+ usb30@1 {
-+ status = "ok";
-+ };
-+
-+ pcie0: pci@1b500000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ pcie1: pci@1b700000 {
-+ status = "ok";
-+ phy-tx0-term-offset = <7>;
-+ };
-+
-+ mdio0: mdio {
-+ compatible = "virtual,mdio-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-+ pinctrl-0 = <&mdio0_pins>;
-+ pinctrl-names = "default";
-+
-+ phy0: ethernet-phy@0 {
-+ device_type = "ethernet-phy";
-+ reg = <0>;
-+ qca,ar8327-initvals = <
-+ 0x00004 0x7600000 /* PAD0_MODE */
-+ 0x00008 0x1000000 /* PAD5_MODE */
-+ 0x0000c 0x80 /* PAD6_MODE */
-+ 0x000e4 0xaa545 /* MAC_POWER_SEL */
-+ 0x000e0 0xc74164de /* SGMII_CTRL */
-+ 0x0007c 0x4e /* PORT0_STATUS */
-+ 0x00094 0x4e /* PORT6_STATUS */
-+ >;
-+ };
-+
-+ phy4: ethernet-phy@4 {
-+ device_type = "ethernet-phy";
-+ reg = <4>;
-+ };
-+ };
-+
-+ gmac1: ethernet@37200000 {
-+ status = "ok";
-+ phy-mode = "rgmii";
-+ qcom,id = <1>;
-+
-+ pinctrl-0 = <&rgmii2_pins>;
-+ pinctrl-names = "default";
-+
-+ mtd-mac-address = <&defaultmac 0x8>;
-+ mtd-mac-address-increment = <1>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+
-+ gmac2: ethernet@37400000 {
-+ status = "ok";
-+ phy-mode = "sgmii";
-+ qcom,id = <2>;
-+
-+ mtd-mac-address = <&defaultmac 0x8>;
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+
-+ wifi {
-+ label = "wifi";
-+ gpios = <&qcom_pinmux 49 1>;
-+ linux,code = <KEY_WLAN>;
-+ };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&qcom_pinmux 64 1>;
-+ linux,code = <KEY_RESTART>;
-+ };
-+
-+ wps {
-+ label = "wps";
-+ gpios = <&qcom_pinmux 65 1>;
-+ linux,code = <KEY_WPS_BUTTON>;
-+ };
-+ ledgeneral {
-+ label = "ledgeneral";
-+ gpios = <&qcom_pinmux 16 1>;
-+ linux,code = <KEY_DOLLAR>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+
-+ lan {
-+ label = "lan:blue";
-+ gpios = <&qcom_pinmux 6 0>;
-+ };
-+ usb4 {
-+ label = "usb_4:blue";
-+ gpios = <&qcom_pinmux 7 0>;
-+ };
-+ usb2 {
-+ label = "usb_2:blue";
-+ gpios = <&qcom_pinmux 8 0>;
-+ };
-+ wps {
-+ label = "wps:blue";
-+ gpios = <&qcom_pinmux 9 0>;
-+ };
-+ wan_blue {
-+ label = "wan:blue";
-+ gpios = <&qcom_pinmux 33 1>;
-+ };
-+ status {
-+ label = "status:blue";
-+ gpios = <&qcom_pinmux 53 0>;
-+ default-state = "on";
-+ };
-+ ledgnr {
-+ label = "ledgnr:blue";
-+ gpios = <&qcom_pinmux 66 0>;
-+ };
-+ };
-+};
-+
-+&adm_dma {
-+ status = "ok";
-+};
projects / openwrt / openwrt.git / commitdiff