board.d: remove redundant ucidef_set_interfaces_lan_wan() calls
authorJo-Philipp Wich <jow@openwrt.org>
Thu, 3 Dec 2015 17:30:56 +0000 (17:30 +0000)
committerJo-Philipp Wich <jow@openwrt.org>
Thu, 3 Dec 2015 17:30:56 +0000 (17:30 +0000)
This removes calls to ucidef_set_interfaces_lan_wan() and
ucidef_set_interfaces_lan() on boards where all relevant info can be
inferred from the switch definition.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47722

target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/bcm53xx/base-files/etc/board.d/02_network
target/linux/mpc85xx/base-files/etc/board.d/02_network
target/linux/ramips/base-files/etc/board.d/02_network

index b88b6bb..b7d6a3e 100755 (executable)
@@ -24,14 +24,12 @@ ubnt-unifi-outdoor)
 
 ap132 |\
 wlr8100)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
        ;;
 
 esr1750 |\
 epg5000)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
        ;;
@@ -68,13 +66,11 @@ bsb)
        ;;
 
 cpe510)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "5:lan" "4:wan"
        ;;
 
 airgatewaypro)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "4:lan" "5:wan"
        ;;
@@ -85,8 +81,6 @@ rb-2011uas |\
 rb-2011uias |\
 rb-2011uas-2hnd|\
 rb-2011uias-2hnd)
-       ucidef_set_interfaces_lan_wan "eth0.1 eth1" "eth0.2"
-
        case "$board" in
        rb-2011uas* | rb-2011uias | rb-2011uias-2hnd)
                ucidef_add_switch "switch0" \
@@ -162,7 +156,6 @@ rb-750gl |\
 rb-751g |\
 rb-951g-2hnd |\
 wzr-hp-g450h)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
        ;;
@@ -182,7 +175,6 @@ rb-493g)
 wzr-hp-g300nh2 |\
 pb92 |\
 ap113)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "1:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "2:wan"
        ;;
@@ -195,19 +187,16 @@ el-m150)
 
 tl-wdr4300|\
 tl-wr1041n-v2)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
        ;;
 
 tl-wr1043nd)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
        ;;
 
 tl-wr2543n)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
        ;;
@@ -238,13 +227,11 @@ wnr1000-v2)
        ;;
 
 uap-pro)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "1:lan" "2:wan"
        ;;
 
 nanostation-m-xw)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "5:lan" "1:wan"
        ;;
@@ -264,7 +251,6 @@ wzr-hp-g300nh)
 dgl-5500-a1 |\
 dir-825-c1)
        local mac
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
        mac=$(mtd_get_mac_ascii nvram "wan_mac")
@@ -273,7 +259,6 @@ dir-825-c1)
 
 mynet-n750)
        local mac
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
        mac=$(mtd_get_mac_ascii devdata "wanmac")
@@ -288,7 +273,6 @@ dhp-1565-a1 |\
 dir-835-a1 |\
 wndr3700v4 | \
 wndr4300)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
        mac_lan=$(mtd_get_mac_binary caldata 0)
@@ -299,7 +283,6 @@ wndr4300)
 
 esr900)
        local mac
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
        mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
@@ -395,7 +378,6 @@ gl-ar300)
        ;;
 
 wpj344)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "3:lan" "2:wan"
        ;;
@@ -405,7 +387,6 @@ wpj531)
        ;;
 
 wpj558)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "5:lan" "1:wan" "6@eth0"
        ;;
@@ -449,13 +430,11 @@ wzr-hp-ag300h)
        ;;
 
 wzr-hp-g450h)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "2:lan:1 3:lan:2 4:lan:3 5:lan:4" "1:wan"
        ;;
 
 ew-dorin)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "1:lan" "2:lan" "3:wan"
        ;;
index 5abb061..736cdac 100755 (executable)
@@ -28,7 +28,6 @@ netgear,r8000)
 esac
 
 ucidef_set_interface_loopback
-ucidef_set_interfaces_lan_wan "$ifname.1" "$ifname.2"
 
 # Workaround for devices using CPU port 8 (connected to eth2)
 case "$board" in
index 5aab17c..f99ce4c 100755 (executable)
@@ -14,7 +14,6 @@ board=$(mpc85xx_board_name)
 
 case "$board" in
 tl-wdr4900-v1)
-       ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
        ucidef_add_switch "switch0" \
                "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
        ;;
index 3cfb6ba..f2c0edb 100755 (executable)
@@ -86,12 +86,10 @@ ramips_setup_interfaces()
        y1|\
        zbt-wg2626|\
        youku-yk1)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
                ;;
        a5-v11)
-               ucidef_set_interface_lan "eth0.1"
                ucidef_add_switch "switch0" \
                        "0:lan" "6t@eth0"
                ;;
@@ -99,14 +97,12 @@ ramips_setup_interfaces()
        ar725w|\
        rt-n15|\
        wl-351)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
                ;;
        asl26555|\
        re6500|\
        rp-n53)
-               ucidef_set_interface_lan "eth0.1"
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "6t@eth0"
                ;;
@@ -123,12 +119,10 @@ ramips_setup_interfaces()
        wrtnode|\
        wt3020|\
        zbt-wa05)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
                ;;
        awapn2403)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
                        "0:lan" "1:wan" "6@eth0"
                ;;
@@ -142,17 +136,14 @@ ramips_setup_interfaces()
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ;;
        br-6475nd)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
                ;;
        cf-wr800n)
-               ucidef_set_interface_lan "eth0.1"
                ucidef_add_switch "switch0" \
                        "4:lan" "6t@eth0"
                ;;
        cy-swr1100)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0"
                ;;
@@ -164,13 +155,11 @@ ramips_setup_interfaces()
                ;;
        e1700|\
        mt7620a_mt7530)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch1" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
                ;;
        hc5*61|\
        y1s)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
                ;;
@@ -187,44 +176,36 @@ ramips_setup_interfaces()
                ;;
        mzk-dp150n|\
        vocore)
-               ucidef_set_interface_lan "eth0.1"
                ucidef_add_switch "switch0" \
                        "0:lan" "4:lan" "6t@eth0"
                ;;
        rt-n56u)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
                ;;
        tew-691gr|\
        tew-692gr)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
                ;;
        v11st-fe|\
        wzr-agl300nh)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
                ;;
        wcr-150gn)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
                        "0:lan" "6t@eth0"
                ;;
        whr-1166d)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "5:wan" "6@eth0"
                ;;
        wizfi630a)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "0:wan" "6@eth0"
                ;;
        zbt-wr8305rt)
-               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0"
                ;;