ramips: preinit: use iproute2 instead of vconfig
authorJohn Crispin <john@openwrt.org>
Mon, 2 Nov 2015 10:18:02 +0000 (10:18 +0000)
committerJohn Crispin <john@openwrt.org>
Mon, 2 Nov 2015 10:18:02 +0000 (10:18 +0000)
Replace use of vconfig with the corresponding iproute2 syntax in
/lib/preinit/07_set_preinit_iface_ramips

The switch reset work-around needed on some ramips targets used the
deprecated vconfig tool to bring up the pre-init/failsafe interface.
This doesn't work on recent builds where vconfig is no longer being
deployed, resulting in the device being unreachable when triggered
into failsafe mode.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 47349

target/linux/ramips/base-files/lib/preinit/07_set_preinit_iface_ramips

index 90b6d15..3dce1b6 100644 (file)
@@ -23,8 +23,8 @@ ramips_set_preinit_iface() {
                swconfig dev rt305x vlan 1 set ports "0 6"
                swconfig dev rt305x port 6 set untag 0
                swconfig dev rt305x set apply 1
-               vconfig add eth0 1
-               ifconfig eth0 up
+               ip link add link eth0 name eth0.1 type vlan id 1
+               ip link set eth0 up
                ifname=eth0.1
        else
                ifname=eth0