ar71xx: add support for GL.iNet GL-USB150
authorPiotr Dymacz <pepe2k@gmail.com>
Sat, 19 Aug 2017 16:26:46 +0000 (18:26 +0200)
committerPiotr Dymacz <pepe2k@gmail.com>
Sun, 10 Sep 2017 20:14:43 +0000 (22:14 +0200)
GL.iNet GL-USB150 is an USB dongle WiFi router, based on Atheros AR9331.

Specification:

- 400/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- Realtek RTL8152B USB to Ethernet bridge (connected with AR9331 PHY4)
- 1T1R 2.4 GHz
- 2x LED, 1x button
- UART header on PCB

Flash instruction:

Vendor firmware is based on OpenWrt CC. GUI or sysupgrade can be used
to flash LEDE firmware.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
13 files changed:
target/linux/ar71xx/base-files/etc/board.d/01_leds
target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-4.4
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
target/linux/ar71xx/files/arch/mips/ath79/Makefile
target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c [new file with mode: 0644]
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
target/linux/ar71xx/image/generic.mk
target/linux/ar71xx/mikrotik/config-default
target/linux/ar71xx/nand/config-default

index 4132e91..f367885 100755 (executable)
@@ -53,6 +53,7 @@ ap121f)
        ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
        ;;
 ap531b0|\
+gl-usb150|\
 sc1750|\
 sc450)
        ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
index ba54d89..5fa8c2f 100755 (executable)
@@ -75,6 +75,7 @@ ar71xx_setup_interfaces()
        eap7660d|\
        el-mini|\
        fritz300e|\
+       gl-usb150|\
        hiveap-121|\
        loco-m-xw|\
        mr12|\
index 7753a71..6794d89 100644 (file)
@@ -59,6 +59,7 @@ get_status_led() {
        archer-c59-v1|\
        archer-c60-v1|\
        fritz300e|\
+       gl-usb150|\
        mr12|\
        mr16|\
        nbg6616|\
index 7fd5fb4..2eab610 100755 (executable)
@@ -672,6 +672,9 @@ ar71xx_board_detect() {
        *"GL-MIFI")
                name="gl-mifi"
                ;;
+       *"GL-USB150")
+               name="gl-usb150"
+               ;;
        *"HiveAP-121")
                name="hiveap-121"
                ;;
index 05b5634..fcf3294 100755 (executable)
@@ -250,6 +250,7 @@ platform_check_image() {
        gl-ar300|\
        gl-domino|\
        gl-mifi|\
+       gl-usb150|\
        hiwifi-hc6361|\
        hornet-ub-x2|\
        jwap230|\
index 70793af..c747af9 100644 (file)
@@ -116,6 +116,7 @@ CONFIG_ATH79_MACH_GL_AR300M=y
 CONFIG_ATH79_MACH_GL_DOMINO=y
 CONFIG_ATH79_MACH_GL_INET=y
 CONFIG_ATH79_MACH_GL_MIFI=y
+CONFIG_ATH79_MACH_GL_USB150=y
 CONFIG_ATH79_MACH_GS_MINIBOX_V1=y
 CONFIG_ATH79_MACH_GS_OOLITE=y
 # CONFIG_ATH79_MACH_HIVEAP_121 is not set
index ff9c303..6b6188d 100644 (file)
@@ -768,6 +768,15 @@ config ATH79_MACH_GL_INET
        select ATH79_DEV_USB
        select ATH79_DEV_WMAC
 
+config ATH79_MACH_GL_USB150
+       bool "GL.iNet GL-USB150 support"
+       select SOC_AR933X
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_EAP120
        bool "TP-LINK EAP120 support"
        select SOC_AR934X
index 469b6a7..9e91c44 100644 (file)
@@ -120,6 +120,7 @@ obj-$(CONFIG_ATH79_MACH_GL_AR300M)          += mach-gl-ar300m.o
 obj-$(CONFIG_ATH79_MACH_GL_DOMINO)             += mach-gl-domino.o
 obj-$(CONFIG_ATH79_MACH_GL_INET)               += mach-gl-inet.o
 obj-$(CONFIG_ATH79_MACH_GL_MIFI)               += mach-gl-mifi.o
+obj-$(CONFIG_ATH79_MACH_GL_USB150)             += mach-gl-usb150.o
 obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V1)         += mach-gs-minibox-v1.o
 obj-$(CONFIG_ATH79_MACH_GS_OOLITE)             += mach-gs-oolite.o
 obj-$(CONFIG_ATH79_MACH_HIVEAP_121)            += mach-hiveap-121.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c
new file mode 100644 (file)
index 0000000..6cc27e1
--- /dev/null
@@ -0,0 +1,87 @@
+/*
+ * GL.iNet GL-USB150 board support
+ *
+ * Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define GL_USB150_GPIO_LED_POWER       13
+#define GL_USB150_GPIO_LED_WLAN                0
+#define GL_USB150_GPIO_LAN_RESET       7
+#define GL_USB150_GPIO_BTN_RESET       11
+
+#define GL_USB150_KEYS_POLL_INTERVAL           20
+#define GL_USB150_KEYS_DEBOUNCE_INTERVAL       \
+                                       (3 * GL_USB150_KEYS_POLL_INTERVAL)
+
+#define GL_USB150_WMAC_CALDATA_OFFSET  0x1000
+
+static struct gpio_led gl_usb150_leds_gpio[] __initdata = {
+       {
+               .name           = "gl-usb150:green:power",
+               .gpio           = GL_USB150_GPIO_LED_POWER,
+               .active_low     = 0,
+       }, {
+               .name           = "gl-usb150:green:wlan",
+               .gpio           = GL_USB150_GPIO_LED_WLAN,
+               .active_low     = 0,
+       },
+};
+
+static struct gpio_keys_button gl_usb150_gpio_keys[] __initdata = {
+       {
+               .desc                   = "reset",
+               .type                   = EV_KEY,
+               .code                   = KEY_RESTART,
+               .debounce_interval      = GL_USB150_KEYS_DEBOUNCE_INTERVAL,
+               .gpio                   = GL_USB150_GPIO_BTN_RESET,
+               .active_low             = 0,
+       },
+};
+
+static void __init gl_usb150_setup(void)
+{
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+       ath79_register_m25p80(NULL);
+
+       ath79_setup_ar933x_phy4_switch(false, false);
+
+       /* LAN (PHY4 connected with Realtek RTL8152B) */
+       ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
+       ath79_register_mdio(0, 0x0);
+       ath79_register_eth(0);
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_usb150_leds_gpio),
+                                gl_usb150_leds_gpio);
+
+       ath79_register_gpio_keys_polled(-1, GL_USB150_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(gl_usb150_gpio_keys),
+                                       gl_usb150_gpio_keys);
+
+       gpio_request_one(GL_USB150_GPIO_LAN_RESET,
+                        GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+                        "LAN reset");
+
+       ath79_register_wmac(art + GL_USB150_WMAC_CALDATA_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_GL_USB150, "GL-USB150", "GL.iNet GL-USB150",
+            gl_usb150_setup);
index 5bc50a4..16fbdce 100644 (file)
@@ -112,6 +112,7 @@ enum ath79_mach_type {
        ATH79_MACH_GL_DOMINO,                   /* Domino */
        ATH79_MACH_GL_INET,                     /* GL-CONNECT GL-INET */
        ATH79_MACH_GL_MIFI,                     /* GL-MIFI support */
+       ATH79_MACH_GL_USB150,                   /* GL.iNet GL-USB150 */
        ATH79_MACH_GS_MINIBOX_V1,               /* Gainstrong MiniBox V1.0 */
        ATH79_MACH_GS_OOLITE,                   /* GS OOLITE V1.0 */
        ATH79_MACH_HIVEAP_121,                  /* Aerohive HiveAP-121*/
index 01c5bdc..f0b2179 100644 (file)
@@ -278,6 +278,19 @@ define Device/gl-mifi
 endef
 TARGET_DEVICES += gl-mifi
 
+define Device/gl-usb150
+  DEVICE_TITLE := GL.iNet GL-USB150
+  DEVICE_PACKAGES := -swconfig
+  BOARDNAME := GL-USB150
+  IMAGE_SIZE := 16000k
+  CONSOLE := ttyATH0,115200
+  MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
+  SUPPORTED_DEVICES := gl-usb150
+  IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \
+       append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += gl-usb150
+
 define Device/lima
   DEVICE_TITLE := 8devices Lima
   DEVICE_PACKAGES := kmod-usb-core kmod-usb2
index 34c2fc1..83e3a03 100644 (file)
@@ -80,6 +80,7 @@
 # CONFIG_ATH79_MACH_GL_DOMINO is not set
 # CONFIG_ATH79_MACH_GL_INET is not set
 # CONFIG_ATH79_MACH_GL_MIFI is not set
+# CONFIG_ATH79_MACH_GL_USB150 is not set
 # CONFIG_ATH79_MACH_GS_MINIBOX_V1 is not set
 # CONFIG_ATH79_MACH_GS_OOLITE is not set
 # CONFIG_ATH79_MACH_HIWIFI_HC6361 is not set
index 57318b3..99eb346 100644 (file)
@@ -81,6 +81,7 @@ CONFIG_ATH79_MACH_DOMYWIFI_DW33D=y
 # CONFIG_ATH79_MACH_GL_DOMINO is not set
 # CONFIG_ATH79_MACH_GL_INET is not set
 # CONFIG_ATH79_MACH_GL_MIFI is not set
+# CONFIG_ATH79_MACH_GL_USB150 is not set
 # CONFIG_ATH79_MACH_GS_MINIBOX_V1 is not set
 # CONFIG_ATH79_MACH_GS_OOLITE is not set
 CONFIG_ATH79_MACH_HIVEAP_121=y