PKG_NAME:=libtool
PKG_CPE_ID:=cpe:/a:gnu:libtool
-PKG_VERSION:=2.4.6
+PKG_VERSION:=2.4.2
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
PKG_SOURCE_URL:=@GNU/$(PKG_NAME)
-PKG_HASH:=7c87a8c2c8c0fc9cd5019e402bed4292462d00a718a7cd5f11218153bf28b26f
+PKG_HASH:=1d7b6862c1ed162e327f083a6f78f40eae29218f0db8c38393d61dab764c4407
HOST_BUILD_PARALLEL:=1
define Host/Prepare
$(call Host/Prepare/Default)
(cd $(STAGING_DIR_HOST)/share/aclocal/ && rm -f libtool.m4 ltdl.m4 lt~obsolete.m4 ltoptions.m4 ltsugar.m4 ltversion.m4)
- $(if $(QUILT),,(cd $(HOST_BUILD_DIR); touch README-release; $(AM_TOOL_PATHS) ./bootstrap --skip-git --skip-po --force))
-endef
-
-define Host/Configure
- $(if $(QUILT),(cd $(HOST_BUILD_DIR); touch README-release; $(AM_TOOL_PATHS) ./bootstrap --skip-git --skip-po --force))
- $(call Host/Configure/Default)
+ (cd $(HOST_BUILD_DIR); $(AM_TOOL_PATHS) ./bootstrap)
endef
define Host/Install
-From ca10caa502f971f90d8c041aa2476de54ef0ce2b Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Tue, 20 Jul 2021 16:41:11 -0300
-Subject: openwrt: make relocatable, search resources relative to STAGING_DIR
-
-This was originally commited to openwrt by Jo-Philipp Wich
-<jow@openwrt.org>.
-
-(adjusted to v2.4.6)
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-
+--- a/libltdl/config/general.m4sh
++++ b/libltdl/config/general.m4sh
+@@ -45,15 +45,22 @@ progpath="$0"
+ M4SH_VERBATIM([[
+ : ${CP="cp -f"}
+ test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+-: ${EGREP="@EGREP@"}
+-: ${FGREP="@FGREP@"}
+-: ${GREP="@GREP@"}
+ : ${LN_S="@LN_S@"}
+ : ${MAKE="make"}
+ : ${MKDIR="mkdir"}
+ : ${MV="mv -f"}
+ : ${RM="rm -f"}
+-: ${SED="@SED@"}
++if test -n "$STAGING_DIR"; then
++ : ${EGREP="$STAGING_DIR/../host/bin/grep -E"}
++ : ${FGREP="$STAGING_DIR/../host/bin/grep -F"}
++ : ${GREP="$STAGING_DIR/../host/bin/grep"}
++ : ${SED="$STAGING_DIR/../host/bin/sed"}
++else
++ : ${EGREP="@EGREP@"}
++ : ${FGREP="@FGREP@"}
++ : ${GREP="@GREP@"}
++ : ${SED="@SED@"}
++fi
+ : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+ : ${Xsed="$SED -e 1s/^X//"}
+
--- a/libtoolize.in
+++ b/libtoolize.in
-@@ -40,11 +40,18 @@
+@@ -334,15 +334,22 @@ as_unset=as_fn_unset
- : ${AUTOCONF="autoconf"}
- : ${AUTOMAKE="automake"}
+ : ${CP="cp -f"}
+ test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
-: ${EGREP="@EGREP@"}
-: ${FGREP="@FGREP@"}
-: ${GREP="@GREP@"}
: ${LN_S="@LN_S@"}
+ : ${MAKE="make"}
+ : ${MKDIR="mkdir"}
+ : ${MV="mv -f"}
+ : ${RM="rm -f"}
-: ${SED="@SED@"}
+if test -n "$STAGING_DIR"; then
+ : ${EGREP="$STAGING_DIR/../host/bin/grep -E"}
+ : ${GREP="@GREP@"}
+ : ${SED="@SED@"}
+fi
+ : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+ : ${Xsed="$SED -e 1s/^X//"}
+
+@@ -2487,10 +2494,17 @@ func_check_macros ()
+ # Locations for important files:
+ prefix=@prefix@
+- datadir=@datadir@
+- pkgdatadir=@pkgdatadir@
+- pkgltdldir=@pkgdatadir@
+- aclocaldir=@aclocaldir@
++ if test -n "$STAGING_DIR"; then
++ datadir="$STAGING_DIR/../host/share"
++ pkgdatadir="$STAGING_DIR/../host/share/libtool"
++ pkgltdldir="$STAGING_DIR/../host/share/libtool"
++ aclocaldir="$STAGING_DIR/../host/share/aclocal"
++ else
++ datadir=@datadir@
++ pkgdatadir=@pkgdatadir@
++ pkgltdldir=@pkgdatadir@
++ aclocaldir=@aclocaldir@
++ fi
+ auxdir=
+ macrodir=
+ configure_ac=configure.in
+--- a/libtoolize.m4sh
++++ b/libtoolize.m4sh
+@@ -1453,10 +1453,17 @@ func_check_macros ()
- ## -------------------------- ##
---- a/m4/libtool.m4
-+++ b/m4/libtool.m4
-@@ -929,9 +929,8 @@ dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+ # Locations for important files:
+ prefix=@prefix@
+- datadir=@datadir@
+- pkgdatadir=@pkgdatadir@
+- pkgltdldir=@pkgdatadir@
+- aclocaldir=@aclocaldir@
++ if test -n "$STAGING_DIR"; then
++ datadir="$STAGING_DIR/../host/share"
++ pkgdatadir="$STAGING_DIR/../host/share/libtool"
++ pkgltdldir="$STAGING_DIR/../host/share/libtool"
++ aclocaldir="$STAGING_DIR/../host/share/aclocal"
++ else
++ datadir=@datadir@
++ pkgdatadir=@pkgdatadir@
++ pkgltdldir=@pkgdatadir@
++ aclocaldir=@aclocaldir@
++ fi
+ auxdir=
+ macrodir=
+ configure_ac=configure.in
+--- a/libltdl/m4/libtool.m4
++++ b/libltdl/m4/libtool.m4
+@@ -907,9 +907,8 @@ dnl AC_DEFUN([AC_LIBTOOL_RC], [])
# ----------------
m4_defun([_LT_TAG_COMPILER],
[AC_REQUIRE([AC_PROG_CC])dnl
_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
-@@ -8160,9 +8159,9 @@ m4_defun([_LT_DECL_EGREP],
+@@ -7660,9 +7659,9 @@ m4_defun([_LT_DECL_EGREP],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_REQUIRE([AC_PROG_FGREP])dnl
test -z "$GREP" && GREP=grep
dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
AC_SUBST([GREP])
])
-@@ -8195,9 +8194,8 @@ AC_SUBST([DLLTOOL])
+@@ -7695,9 +7694,8 @@ AC_SUBST([DLLTOOL])
# as few characters as possible. Prefer GNU sed if found.
m4_defun([_LT_DECL_SED],
[AC_PROG_SED
-From 67ffe8e8582a7ba1f1d1307a419098e6dd88bdaf Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Tue, 20 Jul 2021 16:41:11 -0300
-Subject: openwrt: cross-compilation path adjustments
-
-Comments from the patch:
-
-Adding 'libdir' from the .la file to our library search paths
-breaks crosscompilation horribly. We cheat here and don't add
-it, instead adding the path where we found the .la. -CL
-
-OE sets installed=no in staging. We need to look in $objdir and $absdir,
-preferring $objdir. RP 31/04/2008
-
-This was originally commited to openwrt by Jo-Philipp Wich
-<jow@openwrt.org>.
-
-(adjusted to v2.4.6)
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-
---- a/build-aux/ltmain.in
-+++ b/build-aux/ltmain.in
-@@ -6049,8 +6049,14 @@ func_mode_link ()
- absdir=$abs_ladir
- libdir=$abs_ladir
+--- a/libltdl/config/ltmain.m4sh
++++ b/libltdl/config/ltmain.m4sh
+@@ -5731,8 +5731,14 @@ func_mode_link ()
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
else
-- dir=$lt_sysroot$libdir
-- absdir=$lt_sysroot$libdir
+- dir="$lt_sysroot$libdir"
+- absdir="$lt_sysroot$libdir"
+ # Adding 'libdir' from the .la file to our library search paths
+ # breaks crosscompilation horribly. We cheat here and don't add
+ # it, instead adding the path where we found the .la. -CL
+ dir="$lt_sysroot$abs_ladir"
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
-+ #dir=$lt_sysroot$libdir
-+ #absdir=$lt_sysroot$libdir
++ #dir="$libdir"
++ #absdir="$lt_sysroot$libdir"
fi
- test yes = "$hardcode_automatic" && avoidtemprpath=yes
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
else
-@@ -6448,8 +6454,6 @@ func_mode_link ()
- add=$libdir/$linklib
+@@ -6130,8 +6136,6 @@ func_mode_link ()
+ add="$libdir/$linklib"
fi
else
- # We cannot seem to hardcode it, guess we'll fake it.
-- add_dir=-L$libdir
+- add_dir="-L$libdir"
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
-@@ -6604,7 +6608,17 @@ func_mode_link ()
+@@ -6286,7 +6290,17 @@ func_mode_link ()
fi
;;
*)
-- path=-L$absdir/$objdir
+- path="-L$absdir/$objdir"
++ # OE sets installed=no in staging. We need to look in $objdir and $absdir,
++ # preferring $objdir. RP 31/04/2008
++ if test -f "$absdir/$objdir/$depdepl" ; then
++ depdepl="$absdir/$objdir/$depdepl"
++ path="-L$absdir/$objdir"
++ elif test -f "$absdir/$depdepl" ; then
++ depdepl="$absdir/$depdepl"
++ path="-L$absdir"
++ else
++ path="-L$absdir/$objdir"
++ fi
+ ;;
+ esac
+ else
+--- a/libltdl/config/ltmain.sh
++++ b/libltdl/config/ltmain.sh
+@@ -6518,8 +6518,14 @@ func_mode_link ()
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+- dir="$lt_sysroot$libdir"
+- absdir="$lt_sysroot$libdir"
++ # Adding 'libdir' from the .la file to our library search paths
++ # breaks crosscompilation horribly. We cheat here and don't add
++ # it, instead adding the path where we found the .la. -CL
++ dir="$lt_sysroot$abs_ladir"
++ absdir="$abs_ladir"
++ libdir="$abs_ladir"
++ #dir="$libdir"
++ #absdir="$lt_sysroot$libdir"
+ fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ else
+@@ -6917,8 +6923,6 @@ func_mode_link ()
+ add="$libdir/$linklib"
+ fi
+ else
+- # We cannot seem to hardcode it, guess we'll fake it.
+- add_dir="-L$libdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+@@ -7073,7 +7077,17 @@ func_mode_link ()
+ fi
+ ;;
+ *)
+- path="-L$absdir/$objdir"
+ # OE sets installed=no in staging. We need to look in $objdir and $absdir,
+ # preferring $objdir. RP 31/04/2008
+ if test -f "$absdir/$objdir/$depdepl" ; then
-From 375833af93999f8b0a747c8a1dfa3ec8d347743d Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Tue, 20 Jul 2021 16:52:37 -0300
-Subject: openwrt: don't use target dir for relinking
-
-This was originally commited to openwrt by Jo-Philipp Wich
-<jow@openwrt.org>.
-
-(adjusted to v2.4.6)
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-
---- a/build-aux/ltmain.in
-+++ b/build-aux/ltmain.in
-@@ -6434,13 +6434,13 @@ func_mode_link ()
- add_dir=
- add=
- # Finalize command for both is simple: just hardcode it.
-- if test yes = "$hardcode_direct" &&
-- test no = "$hardcode_direct_absolute"; then
-- add=$libdir/$linklib
-- elif test yes = "$hardcode_minus_L"; then
-+ if test "$hardcode_direct" = yes &&
-+ test "$hardcode_direct_absolute" = no; then
-+ add="$libdir/$linklib"
-+ elif test "$hardcode_minus_L" = yes; then
- add_dir=-L$libdir
-- add=-l$name
-- elif test yes = "$hardcode_shlibpath_var"; then
-+ add="-l$name"
-+ elif test "$hardcode_shlibpath_var" = yes; then
+--- a/libltdl/config/ltmain.m4sh
++++ b/libltdl/config/ltmain.m4sh
+@@ -6120,7 +6120,6 @@ func_mode_link ()
+ test "$hardcode_direct_absolute" = no; then
+ add="$libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+- add_dir="-L$libdir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+--- a/libltdl/config/ltmain.sh
++++ b/libltdl/config/ltmain.sh
+@@ -6907,7 +6907,6 @@ func_mode_link ()
+ test "$hardcode_direct_absolute" = no; then
+ add="$libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+- add_dir="-L$libdir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
- *":$libdir:"*) ;;
- *) func_append finalize_shlibpath "$libdir:" ;;
-From 7f2b8a1ab4fa1475eeeddfb84eb5b92594bfce43 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Tue, 20 Jul 2021 16:54:12 -0300
-Subject: openwrt: strip unsave directories from relink command
-
-strip unsave directories from relink command, nuke every -L that looks
-like /usr/lib or /lib
-
-This was originally commited to openwrt by Jo-Philipp Wich
-<jow@openwrt.org>.
-
-(adjusted to v2.4.6)
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-
---- a/build-aux/ltmain.in
-+++ b/build-aux/ltmain.in
-@@ -2382,6 +2382,9 @@ func_mode_install ()
+--- a/libltdl/config/ltmain.m4sh
++++ b/libltdl/config/ltmain.m4sh
+@@ -2183,6 +2183,9 @@ func_mode_install ()
relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
fi
+ relink_command=`$ECHO "$relink_command" | $SED "s%-L[[:space:]]*/lib[^[:space:]]*%%"`
+ relink_command=`$ECHO "$relink_command" | $SED "s%-L[[:space:]]*/usr/lib[^[:space:]]*%%"`
+
- func_warning "relinking '$file'"
+ func_warning "relinking \`$file'"
func_show_eval "$relink_command" \
- 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+--- a/libltdl/config/ltmain.sh
++++ b/libltdl/config/ltmain.sh
+@@ -2973,6 +2973,9 @@ func_mode_install ()
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ fi
+
++ relink_command=`$ECHO "$relink_command" | $SED "s%-L[[:space:]]*/lib[^[:space:]]*%%"`
++ relink_command=`$ECHO "$relink_command" | $SED "s%-L[[:space:]]*/usr/lib[^[:space:]]*%%"`
++
+ func_warning "relinking \`$file'"
+ func_show_eval "$relink_command" \
+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+++ /dev/null
-From 1b45c3c0d6682be7f4876b620780ee246a5acbaa Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Tue, 20 Jul 2021 16:56:16 -0300
-Subject: openwrt: remove trailing slash in install destdir
-
-A command like /bin/sh ../../i586-poky-linux-libtool --mode=install /usr/bin/install -c gck-roots-store-standalone.la '/media/data1/builds/poky1/tmp/work/core2-poky-linux/gnome-keyring-2.26.1-r1/image/usr/lib/gnome-keyring/standalone/' fails (e.g. gnome-keyring or pulseaudio)
-
-This is because libdir has a trailing slash which breaks the comparision.
-
-RP 2/1/10
-
-Merged a patch received from Gary Thomas <gary@mlbassoc.com>
-
-Date: 2010/07/12
-Nitin A Kamble <nitin.a.kamble@intel.com>
-
-(adjusted to v2.4.6)
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-
---- a/build-aux/ltmain.in
-+++ b/build-aux/ltmain.in
-@@ -2363,8 +2363,15 @@ func_mode_install ()
- func_append dir "$objdir"
-
- if test -n "$relink_command"; then
-+ # Strip any trailing slash from the destination.
-+ func_stripname '' '/' "$libdir"
-+ destlibdir=$func_stripname_result
-+
-+ func_stripname '' '/' "$destdir"
-+ s_destdir=$func_stripname_result
-+
- # Determine the prefix the user has applied to our future dir.
-- inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
-+ inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"`
-
- # Don't allow the user to place us outside of our expected
- # location b/c this prevents finding dependent libraries that
+++ /dev/null
-From 879578d3f4dc9bc42aa433b1fb6b584564f83617 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Wed, 21 Jul 2021 13:38:24 -0300
-Subject: openwrt: don't quote $(SHELL) in Makefile.am
-
-This allows to use SHELL="env bash" to get a controlled enviroment.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-
---- a/Makefile.am
-+++ b/Makefile.am
-@@ -46,7 +46,7 @@ EXTRA_LTLIBRARIES =
- # Using 'cd' in backquotes may print the directory name, use this instead:
- lt__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-
--git_version_gen = '$(SHELL)' '$(aux_dir)/git-version-gen' '--fallback' '$(VERSION)' '.tarball-version'
-+git_version_gen = $(SHELL) '$(aux_dir)/git-version-gen' '--fallback' '$(VERSION)' '.tarball-version'
- rebuild = rebuild=:; revision=`$(lt__cd) $(srcdir) && $(git_version_gen) | $(SED) 's|-.*$$||'`
-
-
-@@ -301,7 +301,7 @@ libtool: $(ltmain_sh) $(config_status) $
- if test 0 = '$(AM_DEFAULT_VERBOSITY)' && test 1 != '$(V)'; \
- then echo " GEN " $@; \
- else echo '$(SHELL) $(top_builddir)/config.status "$@"'; fi; \
-- cd '$(top_builddir)' && '$(SHELL)' ./config.status '$@'; \
-+ cd '$(top_builddir)' && $(SHELL) ./config.status '$@'; \
- fi
-
-
-@@ -788,13 +788,13 @@ testsuite_deps_uninstalled = $(testsuite
- # Hook the test suite into the check rule
- check-local: $(testsuite_deps_uninstalled)
- $(AM_V_at)$(CD_TESTDIR); \
-- CONFIG_SHELL='$(SHELL)' '$(SHELL)' "$$abs_srcdir/$(TESTSUITE)" \
-+ CONFIG_SHELL=$(SHELL) $(SHELL) "$$abs_srcdir/$(TESTSUITE)" \
- $(TESTS_ENVIRONMENT) $(BUILDCHECK_ENVIRONMENT) $(TESTSUITEFLAGS)
-
- # Run the test suite on the *installed* tree.
- installcheck-local: $(testsuite_deps)
- $(AM_V_at)$(CD_TESTDIR); \
-- CONFIG_SHELL='$(SHELL)' '$(SHELL)' "$$abs_srcdir/$(TESTSUITE)" \
-+ CONFIG_SHELL=$(SHELL) $(SHELL) "$$abs_srcdir/$(TESTSUITE)" \
- $(TESTS_ENVIRONMENT) $(INSTALLCHECK_ENVIRONMENT) $(TESTSUITEFLAGS) \
- AUTOTEST_PATH='$(exec_prefix)/bin'
-
-@@ -806,7 +806,7 @@ check-noninteractive-old:
- .PHONY: check-noninteractive-new
- check-noninteractive-new: $(testsuite_deps_uninstalled)
- $(AM_V_at)$(CD_TESTDIR); \
-- CONFIG_SHELL='$(SHELL)' '$(SHELL)' "$$abs_srcdir/$(TESTSUITE)" \
-+ CONFIG_SHELL=$(SHELL) $(SHELL) "$$abs_srcdir/$(TESTSUITE)" \
- $(TESTS_ENVIRONMENT) $(BUILDCHECK_ENVIRONMENT) \
- -k '!interactive' INNER_TESTSUITEFLAGS=',!interactive' \
- $(TESTSUITEFLAGS)
-@@ -815,7 +815,7 @@ check-noninteractive-new: $(testsuite_de
- .PHONY: check-interactive
- check-interactive: $(testsuite_deps_uninstalled)
- $(AM_V_at)$(CD_TESTDIR); \
-- CONFIG_SHELL='$(SHELL)' '$(SHELL)' "$$abs_srcdir/$(TESTSUITE)" \
-+ CONFIG_SHELL=$(SHELL) $(SHELL) "$$abs_srcdir/$(TESTSUITE)" \
- $(TESTS_ENVIRONMENT) $(BUILDCHECK_ENVIRONMENT) \
- -k interactive -k recursive INNER_TESTSUITEFLAGS=',interactive' \
- $(TESTSUITEFLAGS)
-@@ -827,7 +827,7 @@ check-noninteractive: check-noninteracti
- clean-local:
- -$(CD_TESTDIR); \
- test -f "$$abs_srcdir/$(TESTSUITE)" && \
-- '$(SHELL)' "$$abs_srcdir/$(TESTSUITE)" --clean
-+ $(SHELL) "$$abs_srcdir/$(TESTSUITE)" --clean
-
- ## An empty target to depend on when a rule needs to always run
- ## whenever it is visited.
+++ /dev/null
-From 3adadb568fbf15d952bd25a005b6a9afb7e59dc7 Mon Sep 17 00:00:00 2001
-From: Pavel Raiskup <praiskup@redhat.com>
-Date: Sun, 4 Oct 2015 21:55:03 +0200
-Subject: libtool: mitigate the $sed_quote_subst slowdown
-
-When it is reasonably possible, use shell implementation for
-quoting.
-
-References:
-http://lists.gnu.org/archive/html/libtool/2015-03/msg00005.html
-http://lists.gnu.org/archive/html/libtool/2015-02/msg00000.html
-https://debbugs.gnu.org/cgi/bugreport.cgi?bug=20006
-
-* gl/build-aux/funclib.sh (func_quote): New function that can be
-used as substitution for '$SED $sed_quote_subst' call.
-* build-aux/ltmain.in (func_emit_wrapper): Use func_quote instead
-of '$SED $sed_quote_subst'.
-(func_mode_link): Likewise.
-* NEWS: Document.
-* bootstrap: Sync with funclib.sh.
-
-(cherry picked from commit 32f0df9835ac15ac17e04be57c368172c3ad1d19)
-(skipping NEWS change)
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-
---- a/bootstrap
-+++ b/bootstrap
-@@ -230,7 +230,7 @@ vc_ignore=
-
- # Source required external libraries:
- # Set a version string for this script.
--scriptversion=2015-01-20.17; # UTC
-+scriptversion=2015-10-04.22; # UTC
-
- # General shell script boiler plate, and helper functions.
- # Written by Gary V. Vaughan, 2004
-@@ -1257,6 +1257,57 @@ func_relative_path ()
- }
-
-
-+# func_quote ARG
-+# --------------
-+# Aesthetically quote one ARG, store the result into $func_quote_result. Note
-+# that we keep attention to performance here (so far O(N) complexity as long as
-+# func_append is O(1)).
-+func_quote ()
-+{
-+ $debug_cmd
-+
-+ func_quote_result=$1
-+
-+ case $func_quote_result in
-+ *[\\\`\"\$]*)
-+ case $func_quote_result in
-+ *'*'*|*'['*)
-+ func_quote_result=`$ECHO "$func_quote_result" | $SED "$sed_quote_subst"`
-+ return 0
-+ ;;
-+ esac
-+
-+ func_quote_old_IFS=$IFS
-+ for _G_char in '\' '`' '"' '$'
-+ do
-+ # STATE($1) PREV($2) SEPARATOR($3)
-+ set start "" ""
-+ func_quote_result=dummy"$_G_char$func_quote_result$_G_char"dummy
-+ IFS=$_G_char
-+ for _G_part in $func_quote_result
-+ do
-+ case $1 in
-+ quote)
-+ func_append func_quote_result "$3$2"
-+ set quote "$_G_part" "\\$_G_char"
-+ ;;
-+ start)
-+ set first "" ""
-+ func_quote_result=
-+ ;;
-+ first)
-+ set quote "$_G_part" ""
-+ ;;
-+ esac
-+ done
-+ IFS=$func_quote_old_IFS
-+ done
-+ ;;
-+ *) ;;
-+ esac
-+}
-+
-+
- # func_quote_for_eval ARG...
- # --------------------------
- # Aesthetically quote ARGs to be evaled later.
-@@ -1273,12 +1324,8 @@ func_quote_for_eval ()
- func_quote_for_eval_unquoted_result=
- func_quote_for_eval_result=
- while test 0 -lt $#; do
-- case $1 in
-- *[\\\`\"\$]*)
-- _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
-- *)
-- _G_unquoted_arg=$1 ;;
-- esac
-+ func_quote "$1"
-+ _G_unquoted_arg=$func_quote_result
- if test -n "$func_quote_for_eval_unquoted_result"; then
- func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
- else
---- a/build-aux/ltmain.in
-+++ b/build-aux/ltmain.in
-@@ -3356,7 +3356,8 @@ else
- if test \"\$libtool_execute_magic\" != \"$magic\"; then
- file=\"\$0\""
-
-- qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
-+ func_quote "$ECHO"
-+ qECHO=$func_quote_result
- $ECHO "\
-
- # A function that is used when there is no print builtin or printf.
-@@ -8618,8 +8619,8 @@ EOF
- relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
- fi
- done
-- relink_command="(cd `pwd`; $relink_command)"
-- relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
-+ func_quote "(cd `pwd`; $relink_command)"
-+ relink_command=$func_quote_result
- fi
-
- # Only actually do things if not in dry run mode.
-@@ -8865,7 +8866,8 @@ EOF
- done
- # Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-- relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
-+ func_quote "$relink_command"
-+ relink_command=$func_quote_result
- if test yes = "$hardcode_automatic"; then
- relink_command=
- fi
---- a/build-aux/funclib.sh
-+++ b/build-aux/funclib.sh
-@@ -1,5 +1,5 @@
- # Set a version string for this script.
--scriptversion=2015-01-20.17; # UTC
-+scriptversion=2015-10-04.22; # UTC
-
- # General shell script boiler plate, and helper functions.
- # Written by Gary V. Vaughan, 2004
-@@ -1026,6 +1026,57 @@ func_relative_path ()
- }
-
-
-+# func_quote ARG
-+# --------------
-+# Aesthetically quote one ARG, store the result into $func_quote_result. Note
-+# that we keep attention to performance here (so far O(N) complexity as long as
-+# func_append is O(1)).
-+func_quote ()
-+{
-+ $debug_cmd
-+
-+ func_quote_result=$1
-+
-+ case $func_quote_result in
-+ *[\\\`\"\$]*)
-+ case $func_quote_result in
-+ *[\[\*\?]*)
-+ func_quote_result=`$ECHO "$func_quote_result" | $SED "$sed_quote_subst"`
-+ return 0
-+ ;;
-+ esac
-+
-+ func_quote_old_IFS=$IFS
-+ for _G_char in '\' '`' '"' '$'
-+ do
-+ # STATE($1) PREV($2) SEPARATOR($3)
-+ set start "" ""
-+ func_quote_result=dummy"$_G_char$func_quote_result$_G_char"dummy
-+ IFS=$_G_char
-+ for _G_part in $func_quote_result
-+ do
-+ case $1 in
-+ quote)
-+ func_append func_quote_result "$3$2"
-+ set quote "$_G_part" "\\$_G_char"
-+ ;;
-+ start)
-+ set first "" ""
-+ func_quote_result=
-+ ;;
-+ first)
-+ set quote "$_G_part" ""
-+ ;;
-+ esac
-+ done
-+ IFS=$func_quote_old_IFS
-+ done
-+ ;;
-+ *) ;;
-+ esac
-+}
-+
-+
- # func_quote_for_eval ARG...
- # --------------------------
- # Aesthetically quote ARGs to be evaled later.
-@@ -1042,12 +1093,8 @@ func_quote_for_eval ()
- func_quote_for_eval_unquoted_result=
- func_quote_for_eval_result=
- while test 0 -lt $#; do
-- case $1 in
-- *[\\\`\"\$]*)
-- _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
-- *)
-- _G_unquoted_arg=$1 ;;
-- esac
-+ func_quote "$1"
-+ _G_unquoted_arg=$func_quote_result
- if test -n "$func_quote_for_eval_unquoted_result"; then
- func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
- else
--- /dev/null
+A command like /bin/sh ../../i586-poky-linux-libtool --mode=install /usr/bin/install -c gck-roots-store-standalone.la '/media/data1/builds/poky1/tmp/work/core2-poky-linux/gnome-keyring-2.26.1-r1/image/usr/lib/gnome-keyring/standalone/' fails (e.g. gnome-keyring or pulseaudio)
+
+This is because libdir has a trailing slash which breaks the comparision.
+
+RP 2/1/10
+
+Merged a patch received from Gary Thomas <gary@mlbassoc.com>
+
+Date: 2010/07/12
+Nitin A Kamble <nitin.a.kamble@intel.com>
+
+--- a/libltdl/config/ltmain.m4sh
++++ b/libltdl/config/ltmain.m4sh
+@@ -2167,8 +2167,15 @@ func_mode_install ()
+ func_append dir "$objdir"
+
+ if test -n "$relink_command"; then
++ # Strip any trailing slash from the destination.
++ func_stripname '' '/' "$libdir"
++ destlibdir=$func_stripname_result
++
++ func_stripname '' '/' "$destdir"
++ s_destdir=$func_stripname_result
++
+ # Determine the prefix the user has applied to our future dir.
+- inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
++ inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+--- a/libltdl/config/ltmain.sh
++++ b/libltdl/config/ltmain.sh
+@@ -2954,8 +2954,15 @@ func_mode_install ()
+ func_append dir "$objdir"
+
+ if test -n "$relink_command"; then
++ # Strip any trailing slash from the destination.
++ func_stripname '' '/' "$libdir"
++ destlibdir=$func_stripname_result
++
++ func_stripname '' '/' "$destdir"
++ s_destdir=$func_stripname_result
++
+ # Determine the prefix the user has applied to our future dir.
+- inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
++ inst_prefix_dir=`$ECHO "X$s_destdir" | $Xsed -e "s%$destlibdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
--- /dev/null
+diff -ur libtool-2.4.orig/libltdl/config/ltmain.m4sh libtool-2.4/libltdl/config/ltmain.m4sh
+--- libtool-2.4.orig/libltdl/config/ltmain.m4sh 2015-06-18 10:46:15.499996979 +0200
++++ libtool-2.4/libltdl/config/ltmain.m4sh 2015-06-18 10:48:24.686882213 +0200
+@@ -5076,7 +5076,7 @@
+ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+- -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
++ -O*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ func_append compile_command " $arg"
-From 90707200efadc8e230635c7c204c9c272cbc8631 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Tue, 20 Jul 2021 17:01:03 -0300
-Subject: openwrt: add openwrt branding
-
-This prepends program name with "OpenWrt-".
-
-This was originally commited to openwrt by Jo-Philipp Wich
-<jow@openwrt.org>.
-
-(adjusted to v2.4.6)
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-
---- a/build-aux/ltmain.in
-+++ b/build-aux/ltmain.in
-@@ -82,7 +82,7 @@ func_echo ()
- IFS=$nl
- for _G_line in $_G_message; do
- IFS=$func_echo_IFS
-- $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
-+ $ECHO "OpenWrt-$progname${opt_mode+: $opt_mode}: $_G_line"
- done
- IFS=$func_echo_IFS
+--- a/libltdl/config/general.m4sh
++++ b/libltdl/config/general.m4sh
+@@ -359,7 +359,7 @@ opt_warning=:
+ # name if it has been set yet.
+ func_echo ()
+ {
+- $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }$*"
}
+
+ # func_verbose arg...
+@@ -385,14 +385,14 @@ func_echo_all ()
+ # Echo program name prefixed message to standard error.
+ func_error ()
+ {
+- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+ }
+
+ # func_warning arg...
+ # Echo program name prefixed warning message to standard error.
+ func_warning ()
+ {
+- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
++ $opt_warning && $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
+--- a/libltdl/config/ltmain.sh
++++ b/libltdl/config/ltmain.sh
+@@ -439,7 +439,7 @@ opt_warning=:
+ # name if it has been set yet.
+ func_echo ()
+ {
+- $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }$*"
+ }
+
+ # func_verbose arg...
+@@ -465,14 +465,14 @@ func_echo_all ()
+ # Echo program name prefixed message to standard error.
+ func_error ()
+ {
+- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+ }
+
+ # func_warning arg...
+ # Echo program name prefixed warning message to standard error.
+ func_warning ()
+ {
+- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
++ $opt_warning && $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
+--- a/libtoolize.in
++++ b/libtoolize.in
+@@ -648,7 +648,7 @@ opt_warning=:
+ # name if it has been set yet.
+ func_echo ()
+ {
+- $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }$*"
+ }
+
+ # func_verbose arg...
+@@ -674,14 +674,14 @@ func_echo_all ()
+ # Echo program name prefixed message to standard error.
+ func_error ()
+ {
+- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+ }
+
+ # func_warning arg...
+ # Echo program name prefixed warning message to standard error.
+ func_warning ()
+ {
+- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
++ $opt_warning && $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
+--- a/tests/defs.in
++++ b/tests/defs.in
+@@ -596,7 +596,7 @@ opt_warning=:
+ # name if it has been set yet.
+ func_echo ()
+ {
+- $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }$*"
+ }
+
+ # func_verbose arg...
+@@ -622,14 +622,14 @@ func_echo_all ()
+ # Echo program name prefixed message to standard error.
+ func_error ()
+ {
+- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
++ $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+ }
+
+ # func_warning arg...
+ # Echo program name prefixed warning message to standard error.
+ func_warning ()
+ {
+- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
++ $opt_warning && $ECHO "OpenWrt-$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
projects / openwrt / openwrt.git / commitdiff