ath79: add support for GL-iNet GL-X750
authorLuo chongjun <luochongjun@gl-inet.com>
Mon, 5 Nov 2018 02:03:05 +0000 (10:03 +0800)
committerJohn Crispin <john@phrozen.org>
Mon, 26 Nov 2018 11:05:45 +0000 (12:05 +0100)
this patch adds supports for GL-X750.

Specification:
- SOC: QCA9531 (650MHz)
- Flash: 16 MiB (W25Q128FVSG)
- RAM: 128 MiB DDR2
- Ethernet: 10/100: 1xLAN + 10/100: 1xWAN
- Wireless: 2.4GHz (bgn) and 5GHz (ac)
- USB: 1x USB 2.0 port
- Button: 1x reset button
- LED: 5x LEDS (green)

Flash instruction:
The original firmware is openwrt, so both LuCI or sysupgrade can be used.

Signed-off-by: Luo chongjun <luochongjun@gl-inet.com>
target/linux/ath79/base-files/etc/board.d/01_leds
target/linux/ath79/base-files/etc/board.d/02_network
target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
target/linux/ath79/dts/qca9533_glinet_x750.dts [new file with mode: 0644]
target/linux/ath79/dts/qca9533_glinet_x750.dtsi [new file with mode: 0644]
target/linux/ath79/image/generic.mk

index 5b54c83..47c900f 100755 (executable)
@@ -33,6 +33,9 @@ etactica,eg200)
        ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
        ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica" "ignore"
        ;;
+glinet,x750)
+       ucidef_set_led_netdev "wan" "WAN" "gl-x750:green:wan" "eth0"
+       ;;
 netgear,wnr612-v2|\
 on,n150r)
        ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
index ef94388..fca9e42 100755 (executable)
@@ -1,4 +1,4 @@
-#!/bin/sh
+!/bin/sh
 
 . /lib/functions/system.sh
 . /lib/functions/uci-defaults.sh
@@ -72,7 +72,8 @@ ath79_setup_interfaces()
                ucidef_set_interface_lan "eth0" "dhcp"
                ;;
        glinet,ar150|\
-       glinet,ar300m)
+       glinet,ar300m|\
+       glinet,x750)
                ucidef_set_interfaces_lan_wan "eth1" "eth0"
                ;;
        iodata,etg3-r|\
index dfe2d3e..b4bc20d 100644 (file)
@@ -87,6 +87,10 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/cal-pci-0000:00:00.0.bin")
        case $board in
+       glinet,x750)
+               ath10kcal_extract "art" 20480 2116
+               ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+               ;;
        iodata,wn-ac1167dgr|\
        iodata,wn-ac1600dgr2)
                ath10kcal_extract "art" 20480 2116
diff --git a/target/linux/ath79/dts/qca9533_glinet_x750.dts b/target/linux/ath79/dts/qca9533_glinet_x750.dts
new file mode 100644 (file)
index 0000000..7313f96
--- /dev/null
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9533_glinet_x750.dtsi"
+
+&spi {
+       status = "okay";
+       num-cs = <0>;
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x040000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "u-boot-env";
+                               reg = <0x040000 0x010000>;
+                       };
+
+                        art: partition@50000 {
+                                label = "art";
+                                reg = <0x050000 0x010000>;
+                        };
+
+                       partition@60000 {
+                               label = "firmware";
+                               reg = <0x060000 0xfa0000>;
+                       };
+
+               };
+       };
+};
diff --git a/target/linux/ath79/dts/qca9533_glinet_x750.dtsi b/target/linux/ath79/dts/qca9533_glinet_x750.dtsi
new file mode 100644 (file)
index 0000000..b84c332
--- /dev/null
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9533.dtsi"
+
+/ {
+       compatible = "glinet,x750", "qca,qca9533";
+       model = "GL.iNet GL-X750";
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&jtag_disable_pins>;
+
+               button0 {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+               };
+
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power {
+                       label = "gl-x750:green:power";
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+
+               wlan2g {
+                       label = "gl-x750:green:wlan2g";
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy1tpt";
+               };
+
+               wlan5g {
+                       label = "gl-x750:green:wlan5g";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wan {
+                       label = "gl-x750:green:wan";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+               4g {
+                       label = "gl-x750:green:4g";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+       };
+};
+
+&pcie0 {
+       status = "okay";
+};
+
+&uart {
+       status = "okay";
+};
+
+&usb0 {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       status = "okay";
+
+       hub_port: port@1 {
+               reg = <1>;
+               #trigger-source-cells = <0>;
+       };
+};
+
+&usb_phy {
+       status = "okay";
+};
+
+&eth0 {
+       status = "okay";
+       mtd-mac-address = <&art 0x0>;
+       phy-handle = <&swphy4>;
+};
+
+&eth1 {
+       mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+       status = "okay";
+       mtd-cal-data = <&art 0x1000>;
+       mtd-mac-address = <&art 0x1002>;
+};
index 75e9399..3dbed22 100644 (file)
@@ -176,6 +176,14 @@ define Device/glinet_ar300m_nor
 endef
 TARGET_DEVICES += glinet_ar300m_nor
 
+define Device/glinet_x750
+  ATH_SOC := qca9533
+  DEVICE_TITLE := GL.iNet GL-ARX750
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2  kmod-ath10k ath10k-firmware-qca9887
+  IMAGE_SIZE := 16000k
+endef
+TARGET_DEVICES += glinet_x750
+
 define Device/iodata_etg3-r
   ATH_SOC := ar9342
   DEVICE_TITLE := I-O DATA ETG3-R