apm821xx: unify My Book Live Single + Duo images
authorChristian Lamparter <chunkeey@gmail.com>
Mon, 16 Jul 2018 20:56:36 +0000 (22:56 +0200)
committerMathias Kresin <dev@kresin.me>
Thu, 19 Jul 2018 16:58:24 +0000 (18:58 +0200)
By takimata:
"Come to think of it, an MBL Single board boots up just fine on an
MBL Duo image, and the MBL Single board identifies completely
identical to the MBL Duo
(Board: Apollo-3G - APM82181 Board, 2*SATA, 1*USB).
I wonder if there is any downside to just using the MBL Duo firmware
on a MBL Single. I wonder if the two firmwares could even be unified."

<https://forum.lede-project.org/t/wd-mybook-live-duo-two-disks/16195/9>

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
target/linux/apm821xx/dts/apollo3g.dtsi [deleted file]
target/linux/apm821xx/dts/wd-mybooklive-duo.dts [deleted file]
target/linux/apm821xx/dts/wd-mybooklive.dts
target/linux/apm821xx/image/Makefile

diff --git a/target/linux/apm821xx/dts/apollo3g.dtsi b/target/linux/apm821xx/dts/apollo3g.dtsi
deleted file mode 100644 (file)
index e88973f..0000000
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-#include "apm82181.dtsi"
-
-/ {
-       compatible = "amcc,apollo3g";
-
-       aliases {
-               serial0 = &UART0;
-               led-boot = &status;
-               led-failsafe = &status;
-               led-running = &status;
-               led-upgrade = &status;
-       };
-};
-
-&POB0 {
-       ebc {
-               nor_flash@0,0 {
-                       status = "okay";
-                       compatible = "amd,s29gl512n", "jedec-probe", "cfi-flash", "mtd-rom";
-                       bank-width = <1>;
-                       reg = <0x00000000 0x00000000 0x00080000>;
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               /* Part of bootrom - Don't use it without a jump */
-                               label = "free";
-                               reg = <0x00000000 0x0001e000>;
-                       };
-
-                       partition@1 {
-                               label = "env";
-                               reg = <0x0001e000 0x00002000>;
-                       };
-
-                       partition@2 {
-                               label = "uboot";
-                               reg = <0x00020000 0x00050000>;
-                       };
-               };
-       };
-
-       GPIO1: gpio1@e0000000 {
-               compatible = "wd,mbl-gpio", "ti,74273";
-               reg-names = "dat";
-               reg = <0xe0000000 0x1>;
-               #gpio-cells = <2>;
-               gpio-controller;
-
-               enable-phy {
-                       /* toggle to reset EMAC PHY */
-                       gpio-hog;
-                       line-name = "enable EMAC PHY";
-                       gpios = <0 GPIO_ACTIVE_LOW>;
-                       output-low;
-               };
-
-               enable-button {
-                       /* Defined in u-boot as: NOT_NOR
-                        * "enables features other than NOR
-                        * specifically, the buffer at CS2"
-                        * (button).
-                        *
-                        * Note: This option is disabled as
-                        * it prevents the system from being
-                        * rebooted successfully.
-                        */
-
-                       gpio-hog;
-                       line-name = "Enable Reset Button, disable NOR";
-                       gpios = <1 GPIO_ACTIVE_HIGH>;
-                       output-low;
-               };
-
-               enable-usb {
-                       gpio-hog;
-                       line-name = "Power USB Core";
-                       gpios = <2 GPIO_ACTIVE_LOW>;
-                       output-low;
-                       status = "disabled";
-               };
-
-               enable-port1 {
-                       gpio-hog;
-                       line-name = "Power Drive Port 1";
-                       gpios = <3 GPIO_ACTIVE_LOW>;
-                       output-low;
-               };
-
-               enable-port0 {
-                       gpio-hog;
-                       line-name = "Power Drive Port 0";
-                       gpios = <7 GPIO_ACTIVE_LOW>;
-                       output-low;
-                       status = "disabled";
-               };
-       };
-
-       GPIO2: gpio2@e0100000 {
-               compatible = "wd,mbl-gpio", "ti,74244";
-               reg-names = "dat";
-               reg = <0xe0100000 0x1>;
-               #gpio-cells = <2>;
-               gpio-controller;
-               no-output;
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               failsafe: power-red {
-                       label = "mbl:red:power";
-                       gpios = <&GPIO1 4 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "panic";
-               };
-
-               status: power-green {
-                       label = "mbl:green:power";
-                       gpios = <&GPIO1 5 GPIO_ACTIVE_HIGH>;
-               };
-
-               power-blue {
-                       label = "mbl:blue:power";
-                       gpios = <&GPIO1 6 GPIO_ACTIVE_HIGH>;
-               };
-       };
-
-       gpio_keys_polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <60>;   /* 3 * 20 = 60ms */
-               autorepeat;
-
-               button@1 {
-                       label = "Reset button";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&GPIO2 2 GPIO_ACTIVE_LOW>;
-               };
-       };
-};
-
-&CRYPTO {
-       status = "okay";
-};
-
-&PKA {
-       status = "okay";
-};
-
-&TRNG {
-       status = "okay";
-};
-
-&SATA1 {
-       status = "okay";
-};
-
-&UART0 {
-       status = "okay";
-};
-
-&EMAC0 {
-       status = "okay";
-
-       phy-map = <0x2>;
-       phy-address = <0x1>;
-       phy-handle = <&phy>;
-
-       mdio {
-               phy: phy@1 {
-                       compatible = "ethernet-phy-ieee802.3-c22";
-                       reg = <1>;
-               };
-       };
-};
-
-&SATA1 {
-       status = "okay";
-};
diff --git a/target/linux/apm821xx/dts/wd-mybooklive-duo.dts b/target/linux/apm821xx/dts/wd-mybooklive-duo.dts
deleted file mode 100644 (file)
index 4f6cc50..0000000
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * Device Tree Source for AMCC Canyonlands (460EX)
- *
- * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
- * (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- */
-
-/dts-v1/;
-
-#include "apollo3g.dtsi"
-
-/ {
-       compatible = "wd,mybooklive-duo", "amcc,apollo3g";
-       model = "MyBook Live Duo";
-};
-
-&SATA0 {
-       status = "okay";
-};
-
-&USBOTG0 {
-       status = "okay";
-       dr_mode = "host";
-};
-
-&GPIO1 {
-       enable-usb {
-               status = "okay";
-       };
-
-       enable-port0 {
-               status = "okay";
-       };
-};
index d841352..aee0d32 100644 (file)
@@ -9,9 +9,190 @@
 
 /dts-v1/;
 
-#include "apollo3g.dtsi"
+#include "apm82181.dtsi"
 
 / {
        compatible = "wd,mybooklive", "amcc,apollo3g";
        model = "MyBook Live";
+
+       aliases {
+               serial0 = &UART0;
+               led-boot = &status;
+               led-failsafe = &status;
+               led-running = &status;
+               led-upgrade = &status;
+       };
+};
+
+&POB0 {
+       ebc {
+               nor_flash@0,0 {
+                       status = "okay";
+                       compatible = "amd,s29gl512n", "jedec-probe", "cfi-flash", "mtd-rom";
+                       bank-width = <1>;
+                       reg = <0x00000000 0x00000000 0x00080000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               /* Part of bootrom - Don't use it without a jump */
+                               label = "free";
+                               reg = <0x00000000 0x0001e000>;
+                       };
+
+                       partition@1 {
+                               label = "env";
+                               reg = <0x0001e000 0x00002000>;
+                       };
+
+                       partition@2 {
+                               label = "uboot";
+                               reg = <0x00020000 0x00050000>;
+                       };
+               };
+       };
+
+       GPIO1: gpio1@e0000000 {
+               compatible = "wd,mbl-gpio", "ti,74273";
+               reg-names = "dat";
+               reg = <0xe0000000 0x1>;
+               #gpio-cells = <2>;
+               gpio-controller;
+
+               enable-phy {
+                       /* toggle to reset EMAC PHY */
+                       gpio-hog;
+                       line-name = "enable EMAC PHY";
+                       gpios = <0 GPIO_ACTIVE_LOW>;
+                       output-low;
+               };
+
+               enable-button {
+                       /* Defined in u-boot as: NOT_NOR
+                        * "enables features other than NOR
+                        * specifically, the buffer at CS2"
+                        * (button).
+                        *
+                        * Note: This option is disabled as
+                        * it prevents the system from being
+                        * rebooted successfully.
+                        */
+
+                       gpio-hog;
+                       line-name = "Enable Reset Button, disable NOR";
+                       gpios = <1 GPIO_ACTIVE_HIGH>;
+                       output-low;
+               };
+
+               enable-usb {
+                       gpio-hog;
+                       line-name = "Power USB Core";
+                       gpios = <2 GPIO_ACTIVE_LOW>;
+                       output-low;
+               };
+
+               enable-port1 {
+                       gpio-hog;
+                       line-name = "Power Drive Port 1";
+                       gpios = <3 GPIO_ACTIVE_LOW>;
+                       output-low;
+               };
+
+               enable-port0 {
+                       gpio-hog;
+                       line-name = "Power Drive Port 0";
+                       gpios = <7 GPIO_ACTIVE_LOW>;
+                       output-low;
+               };
+       };
+
+       GPIO2: gpio2@e0100000 {
+               compatible = "wd,mbl-gpio", "ti,74244";
+               reg-names = "dat";
+               reg = <0xe0100000 0x1>;
+               #gpio-cells = <2>;
+               gpio-controller;
+               no-output;
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               failsafe: power-red {
+                       label = "mbl:red:power";
+                       gpios = <&GPIO1 4 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "panic";
+               };
+
+               status: power-green {
+                       label = "mbl:green:power";
+                       gpios = <&GPIO1 5 GPIO_ACTIVE_HIGH>;
+               };
+
+               power-blue {
+                       label = "mbl:blue:power";
+                       gpios = <&GPIO1 6 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
+       gpio_keys_polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <60>;   /* 3 * 20 = 60ms */
+               autorepeat;
+
+               reset-button {
+                       label = "Reset button";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&GPIO2 2 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&EMAC0 {
+       status = "okay";
+
+       phy-map = <0x2>;
+       phy-address = <0x1>;
+       phy-handle = <&phy>;
+
+       mdio {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               phy: phy@1 {
+                       compatible = "ethernet-phy-ieee802.3-c22";
+                       reg = <1>;
+               };
+       };
+};
+
+&CRYPTO {
+       status = "okay";
+};
+
+&PKA {
+       status = "okay";
+};
+
+&TRNG {
+       status = "okay";
+};
+
+&SATA0 {
+       status = "okay";
+};
+
+&SATA1 {
+       status = "okay";
+};
+
+&UART0 {
+       status = "okay";
+};
+
+&USBOTG0 {
+       status = "okay";
+       dr_mode = "host";
 };
index 1e94a40..9d9c0e5 100644 (file)
@@ -214,7 +214,11 @@ define Build/hdd-img
        ./mbl_gen_hdd_img.sh $@ $@.boot $(IMAGE_ROOTFS)
 endef
 
-define Device/MyBookLiveDefault
+define Device/wd_mybooklive
+  DEVICE_TITLE := Western Digital My Book Live Series (Single + Duo)
+  DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-fs-vfat wpad-mini
+  DEVICE_DTS := wd-mybooklive
+  SUPPORTED_DEVICES += mbl wd_mybooklive-duo
   IMAGE_SIZE := 48m
   BLOCKSIZE := 1k
   DTB_SIZE := 16384
@@ -228,25 +232,8 @@ define Device/MyBookLiveDefault
   IMAGE/rootfs.img.gz := boot-script | boot-img | hdd-img | gzip | append-metadata
 endef
 
-define Device/wd_mybooklive
-$(Device/MyBookLiveDefault)
-  DEVICE_TITLE := Western Digital My Book Live
-  DEVICE_DTS := wd-mybooklive
-  SUPPORTED_DEVICES += mbl
-endef
-
 TARGET_DEVICES += wd_mybooklive
 
-define Device/wd_mybooklive-duo
-$(Device/MyBookLiveDefault)
-  DEVICE_TITLE := Western Digital My Book Live Duo
-  DEVICE_PACKAGES := kmod-usb-dwc2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-fs-vfat wpad-mini
-  DEVICE_DTS := wd-mybooklive-duo
-  SUPPORTED_DEVICES += mbl
-endef
-
-TARGET_DEVICES += wd_mybooklive-duo
-
 endif
 
 $(eval $(call BuildImage))