drop 2.6.32 support (next target is 2.6.38)
authorImre Kaloz <kaloz@openwrt.org>
Tue, 25 Jan 2011 08:57:37 +0000 (08:57 +0000)
committerImre Kaloz <kaloz@openwrt.org>
Tue, 25 Jan 2011 08:57:37 +0000 (08:57 +0000)
SVN-Revision: 25096

target/linux/orion/patches-2.6.32/010-ignore_atag_cmdline.patch [deleted file]
target/linux/orion/patches-2.6.32/090-wrt350nv2_gpio_leds_buttons.patch [deleted file]
target/linux/orion/patches-2.6.32/100-wrt350nv2_openwrt_partition_map.patch [deleted file]
target/linux/orion/patches-2.6.32/101-wnr854t_partition_map.patch [deleted file]
target/linux/orion/patches-2.6.32/200-dt2_board_support.patch [deleted file]
target/linux/orion/patches-2.6.32/300-skb_cb_align.patch [deleted file]

diff --git a/target/linux/orion/patches-2.6.32/010-ignore_atag_cmdline.patch b/target/linux/orion/patches-2.6.32/010-ignore_atag_cmdline.patch
deleted file mode 100644 (file)
index 9df21f1..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/kernel/setup.c
-+++ b/arch/arm/kernel/setup.c
-@@ -629,7 +629,7 @@ __tagtable(ATAG_REVISION, parse_tag_revi
- static int __init parse_tag_cmdline(const struct tag *tag)
- {
--      strlcpy(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
-+//    strlcpy(default_command_line, tag->u.cmdline.cmdline, COMMAND_LINE_SIZE);
-       return 0;
- }
diff --git a/target/linux/orion/patches-2.6.32/090-wrt350nv2_gpio_leds_buttons.patch b/target/linux/orion/patches-2.6.32/090-wrt350nv2_gpio_leds_buttons.patch
deleted file mode 100644 (file)
index 30f75fc..0000000
+++ /dev/null
@@ -1,102 +0,0 @@
---- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-@@ -15,6 +15,9 @@
- #include <linux/mtd/physmap.h>
- #include <linux/mv643xx_eth.h>
- #include <linux/ethtool.h>
-+#include <linux/leds.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
- #include <net/dsa.h>
- #include <asm/mach-types.h>
- #include <asm/gpio.h>
-@@ -24,6 +27,80 @@
- #include "common.h"
- #include "mpp.h"
-+/*
-+ * LEDs attached to GPIO
-+ */
-+static struct gpio_led wrt350n_v2_led_pins[] = {
-+      {
-+              .name           = "wrt350nv2:green:power",
-+              .gpio           = 0,
-+              .active_low     = 1,
-+      }, {
-+              .name           = "wrt350nv2:green:security",
-+              .gpio           = 1,
-+              .active_low     = 1,
-+      }, {
-+              .name           = "wrt350nv2:orange:power",
-+              .gpio           = 5,
-+              .active_low     = 1,
-+      }, {
-+              .name           = "wrt350nv2:green:usb",
-+              .gpio           = 6,
-+              .active_low     = 1,
-+      }, {
-+              .name           = "wrt350nv2:green:wireless",
-+              .gpio           = 7,
-+              .active_low     = 1,
-+      },
-+};
-+
-+static struct gpio_led_platform_data wrt350n_v2_led_data = {
-+      .leds           = wrt350n_v2_led_pins,
-+      .num_leds       = ARRAY_SIZE(wrt350n_v2_led_pins),
-+};
-+
-+static struct platform_device wrt350n_v2_leds = {
-+      .name   = "leds-gpio",
-+      .id     = -1,
-+      .dev    = {
-+              .platform_data  = &wrt350n_v2_led_data,
-+      },
-+};
-+
-+/*
-+ * Buttons attached to GPIO
-+ */
-+static struct gpio_keys_button wrt350n_v2_buttons[] = {
-+        {
-+                .code           = KEY_RESTART,
-+                .gpio           = 3,
-+                .desc           = "Reset Button",
-+                .active_low     = 1,
-+        }, {
-+                .code           = KEY_WLAN,
-+                .gpio           = 2,
-+                .desc           = "WPS Button",
-+                .active_low     = 1,
-+        },
-+};
-+
-+static struct gpio_keys_platform_data wrt350n_v2_button_data = {
-+        .buttons        = wrt350n_v2_buttons,
-+        .nbuttons       = ARRAY_SIZE(wrt350n_v2_buttons),
-+};
-+
-+static struct platform_device wrt350n_v2_button_device = {
-+        .name           = "gpio-keys",
-+        .id             = -1,
-+        .num_resources  = 0,
-+        .dev            = {
-+                .platform_data  = &wrt350n_v2_button_data,
-+        },
-+};
-+
-+/*
-+ * General setup
-+ */
- static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
-       {  0, MPP_GPIO },               /* Power LED green (0=on) */
-       {  1, MPP_GPIO },               /* Security LED (0=on) */
-@@ -140,6 +217,8 @@ static void __init wrt350n_v2_init(void)
-       orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
-                                  WRT350N_V2_NOR_BOOT_SIZE);
-       platform_device_register(&wrt350n_v2_nor_flash);
-+      platform_device_register(&wrt350n_v2_button_device);
-+      platform_device_register(&wrt350n_v2_leds);
- }
- static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
diff --git a/target/linux/orion/patches-2.6.32/100-wrt350nv2_openwrt_partition_map.patch b/target/linux/orion/patches-2.6.32/100-wrt350nv2_openwrt_partition_map.patch
deleted file mode 100644 (file)
index f179a05..0000000
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
-@@ -135,11 +135,11 @@ static struct mtd_partition wrt350n_v2_n
-       {
-               .name           = "kernel",
-               .offset         = 0x00000000,
--              .size           = 0x00760000,
-+              .size           = 0x00100000,   // change to kernel mtd size here (1/3)
-       }, {
-               .name           = "rootfs",
--              .offset         = 0x001a0000,
--              .size           = 0x005c0000,
-+              .offset         = 0x00100000,   // change to kernel mtd size here (2/3)
-+              .size           = 0x00650000,   // adopt to kernel mtd size here (3/3) = 0x00750000 - <kernel mtd size>
-       }, {
-               .name           = "lang",
-               .offset         = 0x00760000,
-@@ -152,6 +152,14 @@ static struct mtd_partition wrt350n_v2_n
-               .name           = "u-boot",
-               .offset         = 0x007c0000,
-               .size           = 0x00040000,
-+      }, {
-+              .name           = "eRcOmM_do_not_touch",
-+              .offset         = 0x00750000,
-+              .size           = 0x00010000,   // erasesize
-+      }, {
-+              .name           = "image",      // for sysupgrade
-+              .offset         = 0x00000000,
-+              .size           = 0x00750000,
-       },
- };
diff --git a/target/linux/orion/patches-2.6.32/101-wnr854t_partition_map.patch b/target/linux/orion/patches-2.6.32/101-wnr854t_partition_map.patch
deleted file mode 100644 (file)
index c754106..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/arm/mach-orion5x/wnr854t-setup.c
-+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
-@@ -67,6 +67,10 @@ static struct mtd_partition wnr854t_nor_
-               .name           = "uboot",
-               .offset         = 0x00760000,
-               .size           = 0x00040000,
-+      }, {
-+              .name           = "image",      // for sysupgrade
-+              .offset         = 0x00000000,
-+              .size           = 0x00760000,
-       },
- };
diff --git a/target/linux/orion/patches-2.6.32/200-dt2_board_support.patch b/target/linux/orion/patches-2.6.32/200-dt2_board_support.patch
deleted file mode 100644 (file)
index 2715472..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/arch/arm/mach-orion5x/Kconfig
-+++ b/arch/arm/mach-orion5x/Kconfig
-@@ -16,6 +16,13 @@ config MACH_RD88F5182
-         Say 'Y' here if you want your kernel to support the
-         Marvell Orion-NAS (88F5182) RD2
-+config MACH_DT2
-+      bool "Freecom DataTank Gateway"
-+      select I2C_BOARDINFO
-+      help
-+        Say 'Y' here if you want your kernel to support the
-+        Freecom DataTank Gateway
-+
- config MACH_KUROBOX_PRO
-       bool "KuroBox Pro"
-       select I2C_BOARDINFO
---- a/arch/arm/mach-orion5x/Makefile
-+++ b/arch/arm/mach-orion5x/Makefile
-@@ -20,3 +20,4 @@ obj-$(CONFIG_MACH_WNR854T)   += wnr854t-se
- obj-$(CONFIG_MACH_RD88F5181L_GE)      += rd88f5181l-ge-setup.o
- obj-$(CONFIG_MACH_RD88F5181L_FXO)     += rd88f5181l-fxo-setup.o
- obj-$(CONFIG_MACH_RD88F6183AP_GE)     += rd88f6183ap-ge-setup.o
-+obj-$(CONFIG_MACH_DT2)                += dt2-setup.o
diff --git a/target/linux/orion/patches-2.6.32/300-skb_cb_align.patch b/target/linux/orion/patches-2.6.32/300-skb_cb_align.patch
deleted file mode 100644 (file)
index 3fefa4d..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -332,7 +332,7 @@ struct sk_buff {
-        * want to keep them across layers you have to do a skb_clone()
-        * first. This is owned by whoever has the skb queued ATM.
-        */
--      char                    cb[48];
-+      char                    cb[48] __attribute__((aligned(8)));
- #if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
-       void                    *cb_next;
- #endif