ath79: ubnt: fix DTC warnings
authorKarl Palsson <karlp@etactica.com>
Mon, 28 May 2018 13:37:27 +0000 (13:37 +0000)
committerJohn Crispin <john@phrozen.org>
Fri, 8 Jun 2018 07:56:28 +0000 (09:56 +0200)
Use explicit labels instead of units with no reg's to avoid DTC
warnings.

Signed-off-by: Karl Palsson <karlp@etactica.com>
target/linux/ath79/dts/ar7241_ubnt_unifi.dts
target/linux/ath79/dts/ar7241_ubnt_xm.dtsi

index 1cb45e6..bb42017 100644 (file)
@@ -27,8 +27,7 @@
                #size-cells = <0>;
 
                poll-interval = <20>;
-               button@0 {
-                       label = "reset";
+               reset {
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
 
        leds {
                compatible = "gpio-leds";
-               led@0 {
+               dome-green {
                        label = "ubnt:green:dome";
                        gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
                };
 
-               led@1 {
+               dome-orange {
                        label = "ubnt:orange:dome";
                        gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
                };
 &pcie {
        status = "okay";
 
-       ath9k@0000 {
+       ath9k@0 {
                reg = <0x0000 0 0 0 0>;
                qca,no-eeprom;
        };
index bea9adc..4c46176 100644 (file)
@@ -26,8 +26,7 @@
                #size-cells = <0>;
 
                poll-interval = <20>;
-               button@0 {
-                       label = "reset";
+               reset {
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
                        debounce-interval = <60>;
 
        leds {
                compatible = "gpio-leds";
-               led@0 {
+               link1 {
                        label = "ubnt:red:link1";
                        gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
                };
 
-               led@1 {
+               link2 {
                        label = "ubnt:orange:link2";
                        gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
                };
 
-               led@2 {
+               link3 {
                        label = "ubnt:green:link3";
                        gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
                };
 
-               led@3 {
+               link4 {
                        label = "ubnt:green:link4";
                        gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
                };
 &pcie {
        status = "okay";
 
-       ath9k@0000 {
+       ath9k@0 {
                reg = <0x0000 0 0 0 0>;
                qca,no-eeprom;
        };