linux: ar71xx: add support for Mikrotik Routerboard RB493G
authorJonas Gorski <jogo@openwrt.org>
Tue, 11 Oct 2011 23:05:16 +0000 (23:05 +0000)
committerJonas Gorski <jogo@openwrt.org>
Tue, 11 Oct 2011 23:05:16 +0000 (23:05 +0000)
SVN-Revision: 28423

target/linux/ar71xx/base-files/etc/defconfig/rb-493g/network [new file with mode: 0644]
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/files/arch/mips/ar71xx/mach-rb4xx.c
target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h
target/linux/ar71xx/nand/config-default

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/rb-493g/network b/target/linux/ar71xx/base-files/etc/defconfig/rb-493g/network
new file mode 100644 (file)
index 0000000..013a63e
--- /dev/null
@@ -0,0 +1,41 @@
+config interface loopback
+       option ifname   lo
+       option proto    static
+       option ipaddr   127.0.0.1
+       option netmask  255.0.0.0
+
+config interface lan
+       option ifname   "eth0 eth1.1"
+       option type     bridge
+       option proto    static
+       option ipaddr   192.168.1.1
+       option netmask  255.255.255.0
+
+config interface wan
+       option ifname   eth1.2
+       option proto    dhcp
+
+config switch
+       option name     switch0
+       option reset    1
+       option enable_vlan 1
+
+config switch_vlan
+       option device   switch0
+       option vlan     1
+       option ports    "0 1 2 3 4"
+
+config switch
+       option name     switch1
+       option reset    1
+       option enable_vlan 1
+
+config switch_vlan
+       option device   switch1
+       option vlan     1
+       option ports    "0t 1 2 3 4"
+
+config switch_vlan
+       option device   switch1
+       option vlan     2
+       option ports    "0t 5"
index 3c3dd1a..d099d39 100755 (executable)
@@ -91,6 +91,9 @@ ar71xx_board_name() {
        *"RouterBOARD 493/AH")
                name="rb-493"
                ;;
+       *"RouterBOARD 493G")
+               name="rb-493g"
+               ;;
        *"RouterBOARD 750")
                name="rb-750"
                ;;
index 02fcaa4..88e29c0 100644 (file)
@@ -11,6 +11,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/mdio-gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -342,3 +343,64 @@ static void __init rb493_setup(void)
 
 MIPS_MACHINE(AR71XX_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
             rb493_setup);
+
+#define RB493G_GPIO_MDIO_MDC           7
+#define RB493G_GPIO_MDIO_DATA          8
+
+#define RB493G_MDIO_PHYMASK            BIT(0)
+
+static struct mdio_gpio_platform_data rb493g_mdio_data = {
+       .mdc            = RB493G_GPIO_MDIO_MDC,
+       .mdio           = RB493G_GPIO_MDIO_DATA,
+
+       .phy_mask       = ~RB493G_MDIO_PHYMASK,
+};
+
+static struct platform_device rb493g_mdio_device = {
+       .name           = "mdio-gpio",
+       .id             = -1,
+       .dev            = {
+               .platform_data  = &rb493g_mdio_data,
+       },
+};
+
+static void __init rb493g_setup(void)
+{
+       ar71xx_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
+                                   AR71XX_GPIO_FUNC_SPI_CS2_EN);
+
+       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
+                                   rb4xx_leds_gpio);
+
+       spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
+       platform_device_register(&rb4xx_spi_device);
+       platform_device_register(&rb4xx_nand_device);
+
+       ar71xx_add_device_mdio(~RB493G_MDIO_PHYMASK);
+
+       ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
+       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+       ar71xx_eth0_data.phy_mask = RB493G_MDIO_PHYMASK;
+       ar71xx_eth0_data.speed = SPEED_1000;
+       ar71xx_eth0_data.duplex = DUPLEX_FULL;
+
+       ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1);
+       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+       ar71xx_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev;
+       ar71xx_eth1_data.phy_mask = RB493G_MDIO_PHYMASK;
+       ar71xx_eth1_data.speed = SPEED_1000;
+       ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+
+       platform_device_register(&rb493g_mdio_device);
+
+       ar71xx_add_device_eth(1);
+       ar71xx_add_device_eth(0);
+
+       ar71xx_add_device_usb();
+
+       ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
+}
+
+MIPS_MACHINE(AR71XX_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G",
+            rb493g_setup);
index d75ec42..fa8d5cb 100644 (file)
@@ -42,6 +42,7 @@ enum ar71xx_mach_type {
        AR71XX_MACH_RB_450G,    /* MikroTik RouterBOARD 450G */
        AR71XX_MACH_RB_450,     /* MikroTik RouterBOARD 450 */
        AR71XX_MACH_RB_493,     /* Mikrotik RouterBOARD 493/493AH */
+       AR71XX_MACH_RB_493G,    /* Mikrotik RouterBOARD 493G */
        AR71XX_MACH_RB_750,     /* MikroTik RouterBOARD 750 */
        AR71XX_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
        AR71XX_MACH_TL_MR3220,  /* TP-LINK TL-MR3220 */
index 376147f..49302fb 100644 (file)
@@ -1,4 +1,6 @@
 CONFIG_IP17XX_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_GPIO=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_RB4XX=y
 CONFIG_MTD_NAND_RB750=y