+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
+#include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Qualcomm IPQ8064";
+ compatible = "qcom,ipq8064";
+ interrupt-parent = <&intc>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "qcom,krait";
+ enable-method = "qcom,kpss-acc-v1";
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc0>;
+ qcom,saw = <&saw0>;
+ clocks = <&kraitcc 0>, <&kraitcc 4>;
+ clock-names = "cpu", "l2";
+ clock-latency = <100000>;
+ cpu-supply = <&smb208_s2a>;
+ voltage-tolerance = <5>;
+ cooling-min-state = <0>;
+ cooling-max-state = <10>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SPC>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "qcom,krait";
+ enable-method = "qcom,kpss-acc-v1";
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ qcom,acc = <&acc1>;
+ qcom,saw = <&saw1>;
+ clocks = <&kraitcc 1>, <&kraitcc 4>;
+ clock-names = "cpu", "l2";
+ clock-latency = <100000>;
+ cpu-supply = <&smb208_s2b>;
+ cooling-min-state = <0>;
+ cooling-max-state = <10>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SPC>;
+ };
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ qcom,saw = <&saw_l2>;
+ };
+
+ qcom,l2 {
+ qcom,l2-rates = <384000000 1000000000 1200000000>;
+ };
+
+ idle-states {
+ CPU_SPC: spc {
+ compatible = "qcom,idle-state-spc",
+ "arm,idle-state";
+ entry-latency-us = <400>;
+ exit-latency-us = <900>;
+ min-residency-us = <3000>;
+ };
+ };
+ };
+
+ thermal-zones {
+ cpu-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&gcc 5>;
+ coefficients = <1132 0>;
+
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit0: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&gcc 6>;
+ coefficients = <1132 0>;
+
+ trips {
+ cpu_alert1: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit1: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&gcc 7>;
+ coefficients = <1199 0>;
+
+ trips {
+ cpu_alert2: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit2: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&gcc 8>;
+ coefficients = <1132 0>;
+
+ trips {
+ cpu_alert3: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit3: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ cpu-pmu {
+ compatible = "qcom,krait-pmu";
+ interrupts = <1 10 0x304>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ nss@40000000 {
+ reg = <0x40000000 0x1000000>;
+ no-map;
+ };
+
+ smem: smem@41000000 {
+ reg = <0x41000000 0x200000>;
+ no-map;
+ };
+ };
+
+ clocks {
+ cxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ pxo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+ };
+
+ firmware {
+ scm {
+ compatible = "qcom,scm-apq8064";
+
+ clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
+ clock-names = "core";
+ };
+ };
+
+ kraitcc: clock-controller {
+ compatible = "qcom,krait-cc-v1";
+ #clock-cells = <1>;
+ };
+
+ qcom,pvs {
+ qcom,pvs-format-a;
+ qcom,speed0-pvs0-bin-v0 =
+ < 1400000000 1250000 >,
+ < 1200000000 1200000 >,
+ < 1000000000 1150000 >,
+ < 800000000 1100000 >,
+ < 600000000 1050000 >,
+ < 384000000 1000000 >;
+
+ qcom,speed0-pvs1-bin-v0 =
+ < 1400000000 1175000 >,
+ < 1200000000 1125000 >,
+ < 1000000000 1075000 >,
+ < 800000000 1025000 >,
+ < 600000000 975000 >,
+ < 384000000 925000 >;
+
+ qcom,speed0-pvs2-bin-v0 =
+ < 1400000000 1125000 >,
+ < 1200000000 1075000 >,
+ < 1000000000 1025000 >,
+ < 800000000 995000 >,
+ < 600000000 925000 >,
+ < 384000000 875000 >;
+
+ qcom,speed0-pvs3-bin-v0 =
+ < 1400000000 1050000 >,
+ < 1200000000 1000000 >,
+ < 1000000000 950000 >,
+ < 800000000 900000 >,
+ < 600000000 850000 >,
+ < 384000000 800000 >;
+ };
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
+
+ lpass@28100000 {
+ compatible = "qcom,lpass-cpu";
+ status = "disabled";
+ clocks = <&lcc AHBIX_CLK>,
+ <&lcc MI2S_OSR_CLK>,
+ <&lcc MI2S_BIT_CLK>;
+ clock-names = "ahbix-clk",
+ "mi2s-osr-clk",
+ "mi2s-bit-clk";
+ interrupts = <0 85 1>;
+ interrupt-names = "lpass-irq-lpaif";
+ reg = <0x28100000 0x10000>;
+ reg-names = "lpass-lpaif";
+ };
+
+ qfprom: qfprom@700000 {
+ compatible = "qcom,qfprom", "syscon";
+ reg = <0x00700000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ tsens_calib: calib {
+ reg = <0x400 0x10>;
+ };
+ tsens_backup: backup_calib {
+ reg = <0x410 0x10>;
+ };
+ };
+
+ rpm@108000 {
+ compatible = "qcom,rpm-ipq8064";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <0 19 0>,
+ <0 21 0>,
+ <0 22 0>;
+ interrupt-names = "ack",
+ "err",
+ "wakeup";
+
+ /* clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+ clock-names = "ram"; */
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
+ regulators {
+ compatible = "qcom,rpm-smb208-regulators";
+
+ smb208_s1a: s1a {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+
+ };
+
+ smb208_s1b: s1b {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s2a: s2a {
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1250000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s2b: s2b {
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1250000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+ };
+ };
+
+ rng@1a500000 {
+ compatible = "qcom,prng";
+ reg = <0x1a500000 0x200>;
+ clocks = <&gcc PRNG_CLK>;
+ clock-names = "core";
+ };
+
+ qcom_pinmux: pinmux@800000 {
+ compatible = "qcom,ipq8064-pinctrl";
+ reg = <0x800000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 16 0x4>;
+
+ pcie0_pins: pcie0_pinmux {
+ mux {
+ pins = "gpio3";
+ function = "pcie1_rst";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ pcie1_pins: pcie1_pinmux {
+ mux {
+ pins = "gpio48";
+ function = "pcie2_rst";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ pcie2_pins: pcie2_pinmux {
+ mux {
+ pins = "gpio63";
+ function = "pcie3_rst";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+ };
+ };
+
+ intc: interrupt-controller@2000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x02000000 0x1000>,
+ <0x02002000 0x1000>;
+ };
+
+ timer@200a000 {
+ compatible = "qcom,kpss-timer", "qcom,msm-timer";
+ interrupts = <1 1 0x301>,
+ <1 2 0x301>,
+ <1 3 0x301>,
+ <1 4 0x301>,
+ <1 5 0x301>;
+ reg = <0x0200a000 0x100>;
+ clock-frequency = <25000000>,
+ <32768>;
+ clocks = <&sleep_clk>;
+ clock-names = "sleep";
+ cpu-offset = <0x80000>;
+ };
+
+ acc0: clock-controller@2088000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+ clock-output-names = "acpu0_aux";
+ };
+
+ acc1: clock-controller@2098000 {
+ compatible = "qcom,kpss-acc-v1";
+ reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+ clock-output-names = "acpu1_aux";
+ };
+
+ l2cc: clock-controller@2011000 {
+ compatible = "qcom,kpss-gcc", "syscon";
+ reg = <0x2011000 0x1000>;
+ clock-output-names = "acpu_l2_aux";
+ };
+
+ saw0: regulator@2089000 {
+ compatible = "qcom,saw2", "syscon";
+ reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
+ saw1: regulator@2099000 {
+ compatible = "qcom,saw2", "syscon";
+ reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+ regulator;
+ };
+
+ saw_l2: regulator@02012000 {
+ compatible = "qcom,saw2", "syscon";
+ reg = <0x02012000 0x1000>;
+ regulator;
+ };
+
+ sic_non_secure: sic-non-secure@12100000 {
+ compatible = "syscon";
+ reg = <0x12100000 0x10000>;
+ };
+
+ gsbi2: gsbi@12480000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <2>;
+ reg = <0x12480000 0x100>;
+ clocks = <&gcc GSBI2_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ syscon-tcsr = <&tcsr>;
+
+ uart2: serial@12490000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x12490000 0x1000>,
+ <0x12480000 0x1000>;
+ interrupts = <0 195 0x0>;
+ clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ i2c@124a0000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x124a0000 0x1000>;
+ interrupts = <0 196 0>;
+
+ clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ };
+
+ gsbi4: gsbi@16300000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <4>;
+ reg = <0x16300000 0x100>;
+ clocks = <&gcc GSBI4_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ syscon-tcsr = <&tcsr>;
+
+ gsbi4_serial: serial@16340000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16340000 0x1000>,
+ <0x16300000 0x1000>;
+ interrupts = <0 152 0x0>;
+ clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ i2c@16380000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x16380000 0x1000>;
+ interrupts = <0 153 0>;
+
+ clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gsbi5: gsbi@1a200000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ cell-index = <5>;
+ reg = <0x1a200000 0x100>;
+ clocks = <&gcc GSBI5_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ syscon-tcsr = <&tcsr>;
+
+ uart5: serial@1a240000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x1a240000 0x1000>,
+ <0x1a200000 0x1000>;
+ interrupts = <0 154 0x0>;
+ clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ i2c@1a280000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x1a280000 0x1000>;
+ interrupts = <0 155 0>;
+
+ clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ spi@1a280000 {
+ compatible = "qcom,spi-qup-v1.1.1";
+ reg = <0x1a280000 0x1000>;
+ interrupts = <0 155 0>;
+
+ clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ sata_phy: sata-phy@1b400000 {
+ compatible = "qcom,ipq806x-sata-phy";
+ reg = <0x1b400000 0x200>;
+
+ clocks = <&gcc SATA_PHY_CFG_CLK>;
+ clock-names = "cfg";
+
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ sata@29000000 {
+ compatible = "qcom,ipq806x-ahci", "generic-ahci";
+ reg = <0x29000000 0x180>;
+
+ interrupts = <0 209 0x0>;
+
+ clocks = <&gcc SFAB_SATA_S_H_CLK>,
+ <&gcc SATA_H_CLK>,
+ <&gcc SATA_A_CLK>,
+ <&gcc SATA_RXOOB_CLK>,
+ <&gcc SATA_PMALIVE_CLK>;
+ clock-names = "slave_face", "iface", "core",
+ "rxoob", "pmalive";
+
+ assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
+ assigned-clock-rates = <100000000>, <100000000>;
+
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ status = "disabled";
+ };
+
+ qcom,ssbi@500000 {
+ compatible = "qcom,ssbi";
+ reg = <0x00500000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+ };
+
+ gcc: clock-controller@900000 {
+ compatible = "qcom,gcc-ipq8064";
+ reg = <0x00900000 0x4000>;
+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tcsr: syscon@1a400000 {
+ compatible = "qcom,tcsr-ipq8064", "syscon";
+ reg = <0x1a400000 0x100>;
+ };
+
+ lcc: clock-controller@28000000 {
+ compatible = "qcom,lcc-ipq8064";
+ reg = <0x28000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ sfpb_mutex_block: syscon@1200600 {
+ compatible = "syscon";
+ reg = <0x01200600 0x100>;
+ };
+
+ hs_phy_1: phy@100f8800 {
+ compatible = "qcom,dwc3-hs-usb-phy";
+ reg = <0x100f8800 0x30>;
+ clocks = <&gcc USB30_1_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ ss_phy_1: phy@100f8830 {
+ compatible = "qcom,dwc3-ss-usb-phy";
+ reg = <0x100f8830 0x30>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ hs_phy_0: phy@110f8800 {
+ compatible = "qcom,dwc3-hs-usb-phy";
+ reg = <0x110f8800 0x30>;
+ clocks = <&gcc USB30_0_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ ss_phy_0: phy@110f8830 {
+ compatible = "qcom,dwc3-ss-usb-phy";
+ reg = <0x110f8830 0x30>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
+ usb3_0: usb30@0 {
+ compatible = "qcom,dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "core";
+
+ syscon-tcsr = <&tcsr 0xb0 1>;
+
+ ranges;
+
+ status = "disabled";
+
+ dwc3@11000000 {
+ compatible = "snps,dwc3";
+ reg = <0x11000000 0xcd00>;
+ interrupts = <0 110 0x4>;
+ phys = <&hs_phy_0>, <&ss_phy_0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
+ usb3_1: usb30@1 {
+ compatible = "qcom,dwc3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "core";
+
+ syscon-tcsr = <&tcsr 0xb0 0>;
+
+ ranges;
+
+ status = "disabled";
+
+ dwc3@10000000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000000 0xcd00>;
+ interrupts = <0 205 0x4>;
+ phys = <&hs_phy_1>, <&ss_phy_1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
+ pcie0: pci@1b500000 {
+ compatible = "qcom,pcie-v0";
+ reg = <0x1b500000 0x1000
+ 0x1b502000 0x80
+ 0x1b600000 0x100
+ 0x0ff00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc PCIE_A_CLK>,
+ <&gcc PCIE_H_CLK>,
+ <&gcc PCIE_PHY_CLK>,
+ <&gcc PCIE_AUX_CLK>,
+ <&gcc PCIE_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+
+ assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc PCIE_ACLK_RESET>,
+ <&gcc PCIE_HCLK_RESET>,
+ <&gcc PCIE_POR_RESET>,
+ <&gcc PCIE_PCI_RESET>,
+ <&gcc PCIE_PHY_RESET>,
+ <&gcc PCIE_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+
+ perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+
+ status = "disabled";
+ };
+
+ pcie1: pci@1b700000 {
+ compatible = "qcom,pcie-v0";
+ reg = <0x1b700000 0x1000
+ 0x1b702000 0x80
+ 0x1b800000 0x100
+ 0x31f00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc PCIE_1_A_CLK>,
+ <&gcc PCIE_1_H_CLK>,
+ <&gcc PCIE_1_PHY_CLK>,
+ <&gcc PCIE_1_AUX_CLK>,
+ <&gcc PCIE_1_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+
+ assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc PCIE_1_ACLK_RESET>,
+ <&gcc PCIE_1_HCLK_RESET>,
+ <&gcc PCIE_1_POR_RESET>,
+ <&gcc PCIE_1_PCI_RESET>,
+ <&gcc PCIE_1_PHY_RESET>,
+ <&gcc PCIE_1_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+
+ perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+
+ status = "disabled";
+ };
+
+ pcie2: pci@1b900000 {
+ compatible = "qcom,pcie-v0";
+ reg = <0x1b900000 0x1000
+ 0x1b902000 0x80
+ 0x1ba00000 0x100
+ 0x35f00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <2>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc PCIE_2_A_CLK>,
+ <&gcc PCIE_2_H_CLK>,
+ <&gcc PCIE_2_PHY_CLK>,
+ <&gcc PCIE_2_AUX_CLK>,
+ <&gcc PCIE_2_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+
+ assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc PCIE_2_ACLK_RESET>,
+ <&gcc PCIE_2_HCLK_RESET>,
+ <&gcc PCIE_2_POR_RESET>,
+ <&gcc PCIE_2_PCI_RESET>,
+ <&gcc PCIE_2_PHY_RESET>,
+ <&gcc PCIE_2_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+ pinctrl-0 = <&pcie2_pins>;
+ pinctrl-names = "default";
+
+ perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+
+ status = "disabled";
+ };
+
+ adm_dma: dma@18300000 {
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+ interrupts = <0 170 0>;
+ #dma-cells = <1>;
+
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc ADM0_RESET>,
+ <&gcc ADM0_PBUS_RESET>,
+ <&gcc ADM0_C0_RESET>,
+ <&gcc ADM0_C1_RESET>,
+ <&gcc ADM0_C2_RESET>;
+ reset-names = "clk", "pbus", "c0", "c1", "c2";
+ qcom,ee = <0>;
+
+ status = "disabled";
+ };
+
+ nand@1ac00000 {
+ compatible = "qcom,ebi2-nandc";
+ reg = <0x1ac00000 0x800>;
+
+ clocks = <&gcc EBI2_CLK>,
+ <&gcc EBI2_AON_CLK>;
+ clock-names = "core", "aon";
+
+ dmas = <&adm_dma 3>;
+ dma-names = "rxtx";
+ qcom,cmd-crci = <15>;
+ qcom,data-crci = <3>;
+
+ status = "disabled";
+ };
+
+ nss_common: syscon@03000000 {
+ compatible = "syscon";
+ reg = <0x03000000 0x0000FFFF>;
+ };
+
+ qsgmii_csr: syscon@1bb00000 {
+ compatible = "syscon";
+ reg = <0x1bb00000 0x000001FF>;
+ };
+
+ gmac0: ethernet@37000000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37000000 0x200000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE1_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE1_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac1: ethernet@37200000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37200000 0x200000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE2_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE2_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac2: ethernet@37400000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37400000 0x200000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE3_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE3_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac3: ethernet@37600000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac";
+ reg = <0x37600000 0x200000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE4_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE4_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+ };
+
+ sfpb_mutex: sfpb-mutex {
+ compatible = "qcom,sfpb-mutex";
+ syscon = <&sfpb_mutex_block 4 4>;
+
+ #hwlock-cells = <1>;
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem>;
+ hwlocks = <&sfpb_mutex 3>;
+ };
+};
projects / openwrt / openwrt.git / commitdiff