config BUSYBOX_DEFAULT_SHA3_SMALL
int
default 1
-config BUSYBOX_DEFAULT_FEATURE_FAST_TOP
+config BUSYBOX_DEFAULT_FEATURE_NON_POSIX_CP
bool
default y
-config BUSYBOX_DEFAULT_FEATURE_ETC_NETWORKS
+config BUSYBOX_DEFAULT_FEATURE_VERBOSE_CP_MESSAGE
bool
default n
-config BUSYBOX_DEFAULT_FEATURE_ETC_SERVICES
+config BUSYBOX_DEFAULT_FEATURE_USE_SENDFILE
bool
- default n
+ default y
+config BUSYBOX_DEFAULT_FEATURE_COPYBUF_KB
+ int
+ default 4
+config BUSYBOX_DEFAULT_MONOTONIC_SYSCALL
+ bool
+ default y
+config BUSYBOX_DEFAULT_IOCTL_HEX2STR_ERROR
+ bool
+ default y
config BUSYBOX_DEFAULT_FEATURE_EDITING
bool
default y
config BUSYBOX_DEFAULT_UNICODE_PRESERVE_BROKEN
bool
default n
-config BUSYBOX_DEFAULT_FEATURE_NON_POSIX_CP
- bool
- default y
-config BUSYBOX_DEFAULT_FEATURE_VERBOSE_CP_MESSAGE
- bool
- default n
-config BUSYBOX_DEFAULT_FEATURE_USE_SENDFILE
- bool
- default y
-config BUSYBOX_DEFAULT_FEATURE_COPYBUF_KB
- int
- default 4
-config BUSYBOX_DEFAULT_FEATURE_SKIP_ROOTFS
- bool
- default n
-config BUSYBOX_DEFAULT_MONOTONIC_SYSCALL
- bool
- default y
-config BUSYBOX_DEFAULT_IOCTL_HEX2STR_ERROR
- bool
- default y
-config BUSYBOX_DEFAULT_FEATURE_HWIB
- bool
- default n
config BUSYBOX_DEFAULT_FEATURE_SEAMLESS_XZ
bool
default n
config BUSYBOX_DEFAULT_FEATURE_CPIO_P
bool
default n
+config BUSYBOX_DEFAULT_FEATURE_CPIO_IGNORE_DEVNO
+ bool
+ default n
+config BUSYBOX_DEFAULT_FEATURE_CPIO_RENUMBER_INODES
+ bool
+ default n
config BUSYBOX_DEFAULT_DPKG
bool
default n
config BUSYBOX_DEFAULT_FEATURE_LZMA_FAST
bool
default n
+config BUSYBOX_DEFAULT_FEATURE_VERBOSE
+ bool
+ default n
+config BUSYBOX_DEFAULT_FEATURE_TIMEZONE
+ bool
+ default n
+config BUSYBOX_DEFAULT_FEATURE_PRESERVE_HARDLINKS
+ bool
+ default y
+config BUSYBOX_DEFAULT_FEATURE_HUMAN_READABLE
+ bool
+ default y
config BUSYBOX_DEFAULT_BASENAME
bool
default y
config BUSYBOX_DEFAULT_FEATURE_DF_FANCY
bool
default n
+config BUSYBOX_DEFAULT_FEATURE_SKIP_ROOTFS
+ bool
+ default n
config BUSYBOX_DEFAULT_DIRNAME
bool
default y
config BUSYBOX_DEFAULT_YES
bool
default y
-config BUSYBOX_DEFAULT_FEATURE_VERBOSE
- bool
- default n
-config BUSYBOX_DEFAULT_FEATURE_PRESERVE_HARDLINKS
- bool
- default y
-config BUSYBOX_DEFAULT_FEATURE_HUMAN_READABLE
- bool
- default y
config BUSYBOX_DEFAULT_CHVT
bool
default n
config BUSYBOX_DEFAULT_FEATURE_FIND_MTIME
bool
default y
+config BUSYBOX_DEFAULT_FEATURE_FIND_ATIME
+ bool
+ default n
+config BUSYBOX_DEFAULT_FEATURE_FIND_CTIME
+ bool
+ default n
config BUSYBOX_DEFAULT_FEATURE_FIND_MMIN
bool
default y
+config BUSYBOX_DEFAULT_FEATURE_FIND_AMIN
+ bool
+ default n
+config BUSYBOX_DEFAULT_FEATURE_FIND_CMIN
+ bool
+ default n
config BUSYBOX_DEFAULT_FEATURE_FIND_PERM
bool
default y
config BUSYBOX_DEFAULT_FEATURE_FIND_INUM
bool
default n
+config BUSYBOX_DEFAULT_FEATURE_FIND_SAMEFILE
+ bool
+ default n
config BUSYBOX_DEFAULT_FEATURE_FIND_EXEC
bool
default y
config BUSYBOX_DEFAULT_VERBOSE_RESOLUTION_ERRORS
bool
default y
+config BUSYBOX_DEFAULT_FEATURE_ETC_NETWORKS
+ bool
+ default n
+config BUSYBOX_DEFAULT_FEATURE_ETC_SERVICES
+ bool
+ default n
+config BUSYBOX_DEFAULT_FEATURE_HWIB
+ bool
+ default n
config BUSYBOX_DEFAULT_FEATURE_TLS_SHA1
bool
default n
config BUSYBOX_DEFAULT_HTTPD
bool
default n
+config BUSYBOX_DEFAULT_FEATURE_HTTPD_PORT_DEFAULT
+ int
+ default 80
config BUSYBOX_DEFAULT_FEATURE_HTTPD_RANGES
bool
default n
config BUSYBOX_DEFAULT_FEATURE_TELNETD_STANDALONE
bool
default n
+config BUSYBOX_DEFAULT_FEATURE_TELNETD_PORT_DEFAULT
+ int
+ default 23
config BUSYBOX_DEFAULT_FEATURE_TELNETD_INETD_WAIT
bool
default n
config BUSYBOX_DEFAULT_LPQ
bool
default n
+config BUSYBOX_DEFAULT_FEATURE_MIME_CHARSET
+ string
+ default ""
config BUSYBOX_DEFAULT_MAKEMIME
bool
default n
config BUSYBOX_DEFAULT_SENDMAIL
bool
default n
-config BUSYBOX_DEFAULT_FEATURE_MIME_CHARSET
- string
- default ""
+config BUSYBOX_DEFAULT_FEATURE_FAST_TOP
+ bool
+ default y
+config BUSYBOX_DEFAULT_FEATURE_SHOW_THREADS
+ bool
+ default n
config BUSYBOX_DEFAULT_FREE
bool
default y
config BUSYBOX_DEFAULT_WATCH
bool
default n
-config BUSYBOX_DEFAULT_FEATURE_SHOW_THREADS
- bool
- default n
config BUSYBOX_DEFAULT_CHPST
bool
default n
include $(TOPDIR)/rules.mk
PKG_NAME:=busybox
-PKG_VERSION:=1.34.1
+PKG_VERSION:=1.35.0
PKG_RELEASE:=$(AUTORELEASE)
PKG_FLAGS:=essential
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:=https://www.busybox.net/downloads \
http://sources.buildroot.net
-PKG_HASH:=415fbd89e5344c96acf449d94a6f956dbed62e18e835fc83e064db33a34bd549
+PKG_HASH:=faeeb244c35a348a334f4a59e44626ee870fb07b6884d68c10ae8bc19f83a694
PKG_BUILD_DEPENDS:=BUSYBOX_CONFIG_PAM:libpam
PKG_BUILD_PARALLEL:=1
depends on BUSYBOX_CONFIG_FEATURE_CPIO_O
help
Passthrough mode. Rarely used.
+
+config BUSYBOX_CONFIG_FEATURE_CPIO_IGNORE_DEVNO
+ bool "Support --ignore-devno like GNU cpio"
+ default BUSYBOX_DEFAULT_FEATURE_CPIO_IGNORE_DEVNO
+ depends on BUSYBOX_CONFIG_FEATURE_CPIO_O && BUSYBOX_CONFIG_LONG_OPTS
+ help
+ Optionally ignore device numbers when creating archives.
+
+config BUSYBOX_CONFIG_FEATURE_CPIO_RENUMBER_INODES
+ bool "Support --renumber-inodes like GNU cpio"
+ default BUSYBOX_DEFAULT_FEATURE_CPIO_RENUMBER_INODES
+ depends on BUSYBOX_CONFIG_FEATURE_CPIO_O && BUSYBOX_CONFIG_LONG_OPTS
+ help
+ Optionally renumber inodes when creating archives.
config BUSYBOX_CONFIG_DPKG
bool "dpkg (43 kb)"
default BUSYBOX_DEFAULT_DPKG
menu "Coreutils"
+config BUSYBOX_CONFIG_FEATURE_VERBOSE
+ bool "Support verbose options (usually -v) for various applets"
+ default BUSYBOX_DEFAULT_FEATURE_VERBOSE
+ help
+ Enable cp -v, rm -v and similar messages.
+ Also enables long option (--verbose) if it exists.
+ Without this option, -v is accepted but ignored.
+
+comment "Common options for date and touch"
+
+config BUSYBOX_CONFIG_FEATURE_TIMEZONE
+ bool "Allow timezone in dates"
+ default BUSYBOX_DEFAULT_FEATURE_TIMEZONE
+ depends on BUSYBOX_CONFIG_DESKTOP
+ help
+ Permit the use of timezones when parsing user-provided data
+ strings, e.g. '1996-04-09 12:45:00 -0500'.
+
+ This requires support for the '%z' extension to strptime() which
+ may not be available in all implementations.
+
+comment "Common options for cp and mv"
+ depends on BUSYBOX_CONFIG_CP || BUSYBOX_CONFIG_MV
+
+config BUSYBOX_CONFIG_FEATURE_PRESERVE_HARDLINKS
+ bool "Preserve hard links"
+ default BUSYBOX_DEFAULT_FEATURE_PRESERVE_HARDLINKS
+ depends on BUSYBOX_CONFIG_CP || BUSYBOX_CONFIG_MV
+ help
+ Allow cp and mv to preserve hard links.
+
+comment "Common options for df, du, ls"
+ depends on BUSYBOX_CONFIG_DF || BUSYBOX_CONFIG_DU || BUSYBOX_CONFIG_LS
+
+config BUSYBOX_CONFIG_FEATURE_HUMAN_READABLE
+ bool "Support human readable output (example 13k, 23M, 235G)"
+ default BUSYBOX_DEFAULT_FEATURE_HUMAN_READABLE
+ depends on BUSYBOX_CONFIG_DF || BUSYBOX_CONFIG_DU || BUSYBOX_CONFIG_LS
+ help
+ Allow df, du, and ls to have human readable output.
+
config BUSYBOX_CONFIG_BASENAME
bool "basename (438 bytes)"
default BUSYBOX_DEFAULT_BASENAME
-a Show all filesystems
-i Inodes
-B <SIZE> Blocksize
+
+config BUSYBOX_CONFIG_FEATURE_SKIP_ROOTFS
+ bool "Skip rootfs in mount table"
+ default BUSYBOX_DEFAULT_FEATURE_SKIP_ROOTFS
+ depends on BUSYBOX_CONFIG_DF
+ help
+ Ignore rootfs entry in mount table.
+
+ In Linux, kernel has a special filesystem, rootfs, which is initially
+ mounted on /. It contains initramfs data, if kernel is configured
+ to have one. Usually, another file system is mounted over / early
+ in boot process, and therefore most tools which manipulate
+ mount table, such as df, will skip rootfs entry.
+
+ However, some systems do not mount anything on /.
+ If you need to configure busybox for one of these systems,
+ you may find it useful to turn this option off to make df show
+ initramfs statistics.
+
+ Otherwise, choose Y.
config BUSYBOX_CONFIG_DIRNAME
bool "dirname (329 bytes)"
default BUSYBOX_DEFAULT_DIRNAME
yes is used to repeatedly output a specific string, or
the default string 'y'.
-comment "Common options"
-
-config BUSYBOX_CONFIG_FEATURE_VERBOSE
- bool "Support verbose options (usually -v) for various applets"
- default BUSYBOX_DEFAULT_FEATURE_VERBOSE
- help
- Enable cp -v, rm -v and similar messages.
- Also enables long option (--verbose) if it exists.
- Without this option, -v is accepted but ignored.
-
-comment "Common options for cp and mv"
- depends on BUSYBOX_CONFIG_CP || BUSYBOX_CONFIG_MV
-
-config BUSYBOX_CONFIG_FEATURE_PRESERVE_HARDLINKS
- bool "Preserve hard links"
- default BUSYBOX_DEFAULT_FEATURE_PRESERVE_HARDLINKS
- depends on BUSYBOX_CONFIG_CP || BUSYBOX_CONFIG_MV
- help
- Allow cp and mv to preserve hard links.
-
-comment "Common options for df, du, ls"
- depends on BUSYBOX_CONFIG_DF || BUSYBOX_CONFIG_DU || BUSYBOX_CONFIG_LS
-
-config BUSYBOX_CONFIG_FEATURE_HUMAN_READABLE
- bool "Support human readable output (example 13k, 23M, 235G)"
- default BUSYBOX_DEFAULT_FEATURE_HUMAN_READABLE
- depends on BUSYBOX_CONFIG_DF || BUSYBOX_CONFIG_DU || BUSYBOX_CONFIG_LS
- help
- Allow df, du, and ls to have human readable output.
-
endmenu
interpreted by other programs.
config BUSYBOX_CONFIG_FEATURE_FIND_MTIME
- bool "Enable -mtime: modified time matching"
+ bool "Enable -mtime: modification time matching"
default BUSYBOX_DEFAULT_FEATURE_FIND_MTIME
depends on BUSYBOX_CONFIG_FIND
help
Allow searching based on the modification time of
files, in days.
+config BUSYBOX_CONFIG_FEATURE_FIND_ATIME
+ bool "Enable -atime: access time matching"
+ default BUSYBOX_DEFAULT_FEATURE_FIND_ATIME
+ depends on BUSYBOX_CONFIG_FEATURE_FIND_MTIME
+ help
+ Allow searching based on the access time of
+ files, in days.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_CTIME
+ bool "Enable -ctime: status change timestamp matching"
+ default BUSYBOX_DEFAULT_FEATURE_FIND_CTIME
+ depends on BUSYBOX_CONFIG_FEATURE_FIND_MTIME
+ help
+ Allow searching based on the status change timestamp of
+ files, in days.
+
config BUSYBOX_CONFIG_FEATURE_FIND_MMIN
- bool "Enable -mmin: modified time matching by minutes"
+ bool "Enable -mmin: modification time matching by minutes"
default BUSYBOX_DEFAULT_FEATURE_FIND_MMIN
depends on BUSYBOX_CONFIG_FIND
help
Allow searching based on the modification time of
files, in minutes.
+config BUSYBOX_CONFIG_FEATURE_FIND_AMIN
+ bool "Enable -amin: access time matching by minutes"
+ default BUSYBOX_DEFAULT_FEATURE_FIND_AMIN
+ depends on BUSYBOX_CONFIG_FEATURE_FIND_MMIN
+ help
+ Allow searching based on the access time of
+ files, in minutes.
+
+config BUSYBOX_CONFIG_FEATURE_FIND_CMIN
+ bool "Enable -cmin: status change timestamp matching by minutes"
+ default BUSYBOX_DEFAULT_FEATURE_FIND_CMIN
+ depends on BUSYBOX_CONFIG_FEATURE_FIND_MMIN
+ help
+ Allow searching based on the status change timestamp of
+ files, in minutes.
+
config BUSYBOX_CONFIG_FEATURE_FIND_PERM
bool "Enable -perm: permissions matching"
default BUSYBOX_DEFAULT_FEATURE_FIND_PERM
default BUSYBOX_DEFAULT_FEATURE_FIND_INUM
depends on BUSYBOX_CONFIG_FIND
+config BUSYBOX_CONFIG_FEATURE_FIND_SAMEFILE
+ bool "Enable -samefile: reference file matching"
+ default BUSYBOX_DEFAULT_FEATURE_FIND_SAMEFILE
+ depends on BUSYBOX_CONFIG_FIND
+ help
+ Support the 'find -samefile' option for searching by a reference file.
+
config BUSYBOX_CONFIG_FEATURE_FIND_EXEC
bool "Enable -exec: execute commands"
default BUSYBOX_DEFAULT_FEATURE_FIND_EXEC
64-bit x86: +270 bytes of code, 45% faster
32-bit x86: +450 bytes of code, 75% faster
-config BUSYBOX_CONFIG_FEATURE_FAST_TOP
- bool "Faster /proc scanning code (+100 bytes)"
- default BUSYBOX_DEFAULT_FEATURE_FAST_TOP # all "fast or small" options default to small
+config BUSYBOX_CONFIG_FEATURE_NON_POSIX_CP
+ bool "Non-POSIX, but safer, copying to special nodes"
+ default BUSYBOX_DEFAULT_FEATURE_NON_POSIX_CP
help
- This option makes top and ps ~20% faster (or 20% less CPU hungry),
- but code size is slightly bigger.
+ With this option, "cp file symlink" will delete symlink
+ and create a regular file. This does not conform to POSIX,
+ but prevents a symlink attack.
+ Similarly, "cp file device" will not send file's data
+ to the device. (To do that, use "cat file >device")
-config BUSYBOX_CONFIG_FEATURE_ETC_NETWORKS
- bool "Support /etc/networks"
- default BUSYBOX_DEFAULT_FEATURE_ETC_NETWORKS
+config BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE
+ bool "Give more precise messages when copy fails (cp, mv etc)"
+ default BUSYBOX_DEFAULT_FEATURE_VERBOSE_CP_MESSAGE
help
- Enable support for network names in /etc/networks. This is
- a rarely used feature which allows you to use names
- instead of IP/mask pairs in route command.
+ Error messages with this feature enabled:
-config BUSYBOX_CONFIG_FEATURE_ETC_SERVICES
- bool "Consult /etc/services even for well-known ports"
- default BUSYBOX_DEFAULT_FEATURE_ETC_SERVICES
+ $ cp file /does_not_exist/file
+ cp: cannot create '/does_not_exist/file': Path does not exist
+ $ cp file /vmlinuz/file
+ cp: cannot stat '/vmlinuz/file': Path has non-directory component
+
+ If this feature is not enabled, they will be, respectively:
+
+ cp: cannot create '/does_not_exist/file': No such file or directory
+ cp: cannot stat '/vmlinuz/file': Not a directory
+
+ This will cost you ~60 bytes.
+
+config BUSYBOX_CONFIG_FEATURE_USE_SENDFILE
+ bool "Use sendfile system call"
+ default BUSYBOX_DEFAULT_FEATURE_USE_SENDFILE
help
- Look up e.g. "telnet" and "http" in /etc/services file
- instead of assuming ports 23 and 80.
- This is almost never necessary (everybody uses standard ports),
- and it makes sense to avoid reading this file.
- If you disable this option, in the cases where port is explicitly
- specified as a service name (e.g. "telnet HOST PORTNAME"),
- it will still be looked up in /etc/services.
+ When enabled, busybox will use the kernel sendfile() function
+ instead of read/write loops to copy data between file descriptors
+ (for example, cp command does this a lot).
+ If sendfile() doesn't work, copying code falls back to read/write
+ loop. sendfile() was originally implemented for faster I/O
+ from files to sockets, but since Linux 2.6.33 it was extended
+ to work for many more file types.
+
+config BUSYBOX_CONFIG_FEATURE_COPYBUF_KB
+ int "Copy buffer size, in kilobytes"
+ range 1 1024
+ default BUSYBOX_DEFAULT_FEATURE_COPYBUF_KB
+ help
+ Size of buffer used by cp, mv, install, wget etc.
+ Buffers which are 4 kb or less will be allocated on stack.
+ Bigger buffers will be allocated with mmap, with fallback to 4 kb
+ stack buffer if mmap fails.
+
+config BUSYBOX_CONFIG_MONOTONIC_SYSCALL
+ bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
+ default BUSYBOX_DEFAULT_MONOTONIC_SYSCALL
+ help
+ Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
+ time intervals (time, ping, traceroute etc need this).
+ Probably requires Linux 2.6+. If not selected, gettimeofday
+ will be used instead (which gives wrong results if date/time
+ is reset).
+
+config BUSYBOX_CONFIG_IOCTL_HEX2STR_ERROR
+ bool "Use ioctl names rather than hex values in error messages"
+ default BUSYBOX_DEFAULT_IOCTL_HEX2STR_ERROR
+ help
+ Use ioctl names rather than hex values in error messages
+ (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
+ saves about 1400 bytes.
config BUSYBOX_CONFIG_FEATURE_EDITING
bool "Command line editing"
For example, this means that entering 'l', 's', ' ', 0xff, [Enter]
at shell prompt will list file named 0xff (single char name
with char value 255), not file named '?'.
-
-config BUSYBOX_CONFIG_FEATURE_NON_POSIX_CP
- bool "Non-POSIX, but safer, copying to special nodes"
- default BUSYBOX_DEFAULT_FEATURE_NON_POSIX_CP
- help
- With this option, "cp file symlink" will delete symlink
- and create a regular file. This does not conform to POSIX,
- but prevents a symlink attack.
- Similarly, "cp file device" will not send file's data
- to the device. (To do that, use "cat file >device")
-
-config BUSYBOX_CONFIG_FEATURE_VERBOSE_CP_MESSAGE
- bool "Give more precise messages when copy fails (cp, mv etc)"
- default BUSYBOX_DEFAULT_FEATURE_VERBOSE_CP_MESSAGE
- help
- Error messages with this feature enabled:
-
- $ cp file /does_not_exist/file
- cp: cannot create '/does_not_exist/file': Path does not exist
- $ cp file /vmlinuz/file
- cp: cannot stat '/vmlinuz/file': Path has non-directory component
-
- If this feature is not enabled, they will be, respectively:
-
- cp: cannot create '/does_not_exist/file': No such file or directory
- cp: cannot stat '/vmlinuz/file': Not a directory
-
- This will cost you ~60 bytes.
-
-config BUSYBOX_CONFIG_FEATURE_USE_SENDFILE
- bool "Use sendfile system call"
- default BUSYBOX_DEFAULT_FEATURE_USE_SENDFILE
- help
- When enabled, busybox will use the kernel sendfile() function
- instead of read/write loops to copy data between file descriptors
- (for example, cp command does this a lot).
- If sendfile() doesn't work, copying code falls back to read/write
- loop. sendfile() was originally implemented for faster I/O
- from files to sockets, but since Linux 2.6.33 it was extended
- to work for many more file types.
-
-config BUSYBOX_CONFIG_FEATURE_COPYBUF_KB
- int "Copy buffer size, in kilobytes"
- range 1 1024
- default BUSYBOX_DEFAULT_FEATURE_COPYBUF_KB
- help
- Size of buffer used by cp, mv, install, wget etc.
- Buffers which are 4 kb or less will be allocated on stack.
- Bigger buffers will be allocated with mmap, with fallback to 4 kb
- stack buffer if mmap fails.
-
-config BUSYBOX_CONFIG_FEATURE_SKIP_ROOTFS
- bool "Skip rootfs in mount table"
- default BUSYBOX_DEFAULT_FEATURE_SKIP_ROOTFS
- help
- Ignore rootfs entry in mount table.
-
- In Linux, kernel has a special filesystem, rootfs, which is initially
- mounted on /. It contains initramfs data, if kernel is configured
- to have one. Usually, another file system is mounted over / early
- in boot process, and therefore most tools which manipulate
- mount table, such as df, will skip rootfs entry.
-
- However, some systems do not mount anything on /.
- If you need to configure busybox for one of these systems,
- you may find it useful to turn this option off to make df show
- initramfs statistics.
-
- Otherwise, choose Y.
-
-config BUSYBOX_CONFIG_MONOTONIC_SYSCALL
- bool "Use clock_gettime(CLOCK_MONOTONIC) syscall"
- default BUSYBOX_DEFAULT_MONOTONIC_SYSCALL
- help
- Use clock_gettime(CLOCK_MONOTONIC) syscall for measuring
- time intervals (time, ping, traceroute etc need this).
- Probably requires Linux 2.6+. If not selected, gettimeofday
- will be used instead (which gives wrong results if date/time
- is reset).
-
-config BUSYBOX_CONFIG_IOCTL_HEX2STR_ERROR
- bool "Use ioctl names rather than hex values in error messages"
- default BUSYBOX_DEFAULT_IOCTL_HEX2STR_ERROR
- help
- Use ioctl names rather than hex values in error messages
- (e.g. VT_DISALLOCATE rather than 0x5608). If disabled this
- saves about 1400 bytes.
-
-config BUSYBOX_CONFIG_FEATURE_HWIB
- bool "Support infiniband HW"
- default BUSYBOX_DEFAULT_FEATURE_HWIB
- help
- Support for printing infiniband addresses in network applets.
# DO NOT EDIT. This file is generated from Config.src
menu "Mail Utilities"
+config BUSYBOX_CONFIG_FEATURE_MIME_CHARSET
+ string "Default charset"
+ default BUSYBOX_DEFAULT_FEATURE_MIME_CHARSET
+ depends on BUSYBOX_CONFIG_MAKEMIME || BUSYBOX_CONFIG_REFORMIME || BUSYBOX_CONFIG_SENDMAIL
+ help
+ Default charset of the message.
+
config BUSYBOX_CONFIG_MAKEMIME
bool "makemime (5.4 kb)"
default BUSYBOX_DEFAULT_MAKEMIME
help
Barebones sendmail.
-config BUSYBOX_CONFIG_FEATURE_MIME_CHARSET
- string "Default charset"
- default BUSYBOX_DEFAULT_FEATURE_MIME_CHARSET
- depends on BUSYBOX_CONFIG_MAKEMIME || BUSYBOX_CONFIG_REFORMIME || BUSYBOX_CONFIG_SENDMAIL
- help
- Default charset of the message.
-
endmenu
"can't resolve 'hostname.com'" and want to know more.
This may increase size of your executable a bit.
+config BUSYBOX_CONFIG_FEATURE_ETC_NETWORKS
+ bool "Support /etc/networks"
+ default BUSYBOX_DEFAULT_FEATURE_ETC_NETWORKS
+ help
+ Enable support for network names in /etc/networks. This is
+ a rarely used feature which allows you to use names
+ instead of IP/mask pairs in route command.
+
+config BUSYBOX_CONFIG_FEATURE_ETC_SERVICES
+ bool "Consult /etc/services even for well-known ports"
+ default BUSYBOX_DEFAULT_FEATURE_ETC_SERVICES
+ help
+ Look up e.g. "telnet" and "http" in /etc/services file
+ instead of assuming ports 23 and 80.
+ This is almost never necessary (everybody uses standard ports),
+ and it makes sense to avoid reading this file.
+ If you disable this option, in the cases where port is explicitly
+ specified as a service name (e.g. "telnet HOST PORTNAME"),
+ it will still be looked up in /etc/services.
+
+config BUSYBOX_CONFIG_FEATURE_HWIB
+ bool "Support infiniband HW"
+ default BUSYBOX_DEFAULT_FEATURE_HWIB
+ help
+ Support for printing infiniband addresses in network applets.
+
config BUSYBOX_CONFIG_FEATURE_TLS_SHA1
bool "In TLS code, support ciphers which use deprecated SHA1"
depends on BUSYBOX_CONFIG_TLS
help
HTTP server.
+config BUSYBOX_CONFIG_FEATURE_HTTPD_PORT_DEFAULT
+ int "Default port"
+ default BUSYBOX_DEFAULT_FEATURE_HTTPD_PORT_DEFAULT
+ range 1 65535
+ depends on BUSYBOX_CONFIG_HTTPD
+
config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES
bool "Support 'Ranges:' header"
default BUSYBOX_DEFAULT_FEATURE_HTTPD_RANGES
bool "Enable long options"
default BUSYBOX_DEFAULT_FEATURE_NSLOOKUP_LONG_OPTIONS
depends on BUSYBOX_CONFIG_FEATURE_NSLOOKUP_BIG && BUSYBOX_CONFIG_LONG_OPTS
-
config BUSYBOX_CONFIG_NTPD
bool "ntpd (22 kb)"
default BUSYBOX_DEFAULT_NTPD
help
Selecting this will make telnetd able to run standalone.
+config BUSYBOX_CONFIG_FEATURE_TELNETD_PORT_DEFAULT
+ int "Default port"
+ default BUSYBOX_DEFAULT_FEATURE_TELNETD_PORT_DEFAULT
+ range 1 65535
+ depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE
+
config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT
bool "Support -w SEC option (inetd wait mode)"
default BUSYBOX_DEFAULT_FEATURE_TELNETD_INETD_WAIT
menu "Process Utilities"
+config BUSYBOX_CONFIG_FEATURE_FAST_TOP
+ bool "Faster /proc scanning code (+100 bytes)"
+ default BUSYBOX_DEFAULT_FEATURE_FAST_TOP # all "fast or small" options default to small
+ help
+ This option makes top and ps ~20% faster (or 20% less CPU hungry),
+ but code size is slightly bigger.
+
+config BUSYBOX_CONFIG_FEATURE_SHOW_THREADS
+ bool "Support thread display in ps/pstree/top"
+ default BUSYBOX_DEFAULT_FEATURE_SHOW_THREADS
+ depends on BUSYBOX_CONFIG_PS || BUSYBOX_CONFIG_TOP || BUSYBOX_CONFIG_PSTREE
+ help
+ Enables the ps -T option, showing of threads in pstree,
+ and 'h' command in top.
+
config BUSYBOX_CONFIG_FREE
bool "free (3.1 kb)"
default BUSYBOX_DEFAULT_FREE
watch is used to execute a program periodically, showing
output to the screen.
-config BUSYBOX_CONFIG_FEATURE_SHOW_THREADS
- bool "Support thread display in ps/pstree/top"
- default BUSYBOX_DEFAULT_FEATURE_SHOW_THREADS
- depends on BUSYBOX_CONFIG_PS || BUSYBOX_CONFIG_TOP || BUSYBOX_CONFIG_PSTREE
- help
- Enables the ps -T option, showing of threads in pstree,
- and 'h' command in top.
-
endmenu
--- a/networking/libiproute/iplink.c
+++ b/networking/libiproute/iplink.c
-@@ -652,7 +652,7 @@ static int do_add_or_delete(char **argv,
+@@ -683,7 +683,7 @@ static int do_add_or_delete(char **argv,
}
xrtnl_open(&rth);
ll_init_map(&rth);
projects / openwrt / openwrt.git / commitdiff