ramips: add support for I-O DATA WN-GX300GR
authorINAGAKI Hiroshi <musashino.open@gmail.com>
Wed, 16 May 2018 12:42:48 +0000 (21:42 +0900)
committerMathias Kresin <dev@kresin.me>
Tue, 19 Jun 2018 20:45:36 +0000 (22:45 +0200)
I-O DATA WN-GX300GR is a 2.4 GHz band 11n router, based on MediaTek
MT7621S.

Specification:

- MT7621S (1-Core, 2-Threads)
- 64 MB of RAM
- 8 MB of Flash (SPI)
- 2T2R 2.4 GHz
- 5x 10/100/1000 Mbps Ethernet
- 2x LEDs, 4x keys (2x buttons, 1x slide switch)
- UART header on PCB
  - Vcc, GND, TX, RX from ethernet port side
  - baudrate: 115200 bps (U-Boot, OpenWrt)

Flash instruction using initramfs image:

1. Connect serial cable to UART header
2. Rename OpenWrt initramfs image for WN-GX300GR to "uImageWN-GX300GR"
and place it in the TFTP directory
3. Set the IP address of the computer to 192.168.99.8, connect to the
LAN port of WN-GX300GR, and start the TFTP server on the computer
4. Connect power cable to WN-GX300GR and turn on the router
5. Press "1" key on the serial console to interrupt boot process on
U-Boot, press Enter key 3 times and start firmware download via TFTP
6. WN-GX300GR downloads initramfs image and boot with it
7. On the initramfs image, execute "mtd erase firmware" to erase stock
firmware and execute sysupgrade with sysupgrade image for WN-GX300GR
8. Wait ~150 seconds to complete flasing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
target/linux/ramips/base-files/etc/board.d/01_leds
target/linux/ramips/base-files/etc/board.d/02_network
target/linux/ramips/base-files/etc/diag.sh
target/linux/ramips/base-files/lib/upgrade/platform.sh
target/linux/ramips/dts/WN-GX300GR.dts [new file with mode: 0644]
target/linux/ramips/image/mt7621.mk

index 1318ab3..a9a68f6 100755 (executable)
@@ -168,6 +168,7 @@ dlink,dwr-921-c1)
        ucidef_set_led_default "sigstrength" "Signal Strength" "$boardname:green:sigstrength" "0"
        ;;
 dir-810l|\
+iodata,wn-gx300gr|\
 mzk-750dhp|\
 mzk-dp150n|\
 vr500)
index de98c1e..49d7f92 100755 (executable)
@@ -195,6 +195,7 @@ ramips_setup_interfaces()
        gl-mt300n|\
        gl-mt750|\
        hg255d|\
+       iodata,wn-gx300gr|\
        jhr-n805r|\
        jhr-n825r|\
        jhr-n926r|\
@@ -460,6 +461,9 @@ ramips_setup_macs()
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       iodata,wn-gx300gr)
+               wan_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 4)" 1)
+               ;;
        kn_rc|\
        kn_rf|\
        kng_rc)
index 7f8e471..e5373a8 100644 (file)
@@ -27,6 +27,7 @@ get_status_led() {
        fonera20n|\
        firewrt|\
        hg255d|\
+       iodata,wn-gx300gr|\
        kn|\
        kn_rc|\
        kn_rf|\
index 5488972..9b17ecb 100755 (executable)
@@ -75,6 +75,7 @@ platform_check_image() {
        hpm|\
        ht-tm02|\
        hw550-3g|\
+       iodata,wn-gx300gr|\
        ip2202|\
        jhr-n805r|\
        jhr-n825r|\
diff --git a/target/linux/ramips/dts/WN-GX300GR.dts b/target/linux/ramips/dts/WN-GX300GR.dts
new file mode 100644 (file)
index 0000000..aa89f05
--- /dev/null
@@ -0,0 +1,156 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "iodata,wn-gx300gr", "mediatek,mt7621-soc";
+       model = "I-O DATA WN-GX300GR";
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x4000000>;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               power {
+                       label = "wn-gx300gr:green:power";
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+               };
+
+               wps {
+                       label = "wn-gx300gr:green:wps";
+                       gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               auto {
+                       label = "auto";
+                       gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
+               };
+
+               custom {
+                       label = "custom";
+                       gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
+               };
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+               m25p,chunked-io = <32>;
+
+               partition@0 {
+                       label = "Bootloader";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "Config";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               Factory: partition@40000 {
+                       label = "Factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "iNIC_rf";
+                       reg = <0x50000 0x10000>;
+                       read-only;
+               };
+
+               partition@60000 {
+                       label = "firmware";
+                       reg = <0x60000 0x770000>;
+               };
+
+               partition@7d0000 {
+                       label = "Key";
+                       reg = <0x7d0000 0x10000>;
+                       read-only;
+               };
+
+               partition@7e0000 {
+                       label = "backup";
+                       reg = <0x7e0000 0x10000>;
+                       read-only;
+               };
+
+               partition@7f0000 {
+                       label = "storage";
+                       reg = <0x7f0000 0x10000>;
+                       read-only;
+               };
+       };
+};
+
+&ethernet {
+       mtd-mac-address = <&Factory 0x4>;
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "uart2", "uart3", "jtag";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+
+       pcie0 {
+               mt76@0,0 {
+                       reg = <0x0000 0 0 0 0>;
+                       device_type = "pci";
+                       mediatek,mtd-eeprom = <&Factory 0x0>;
+               };
+       };
+};
+
+&xhci {
+       status = "disabled";
+};
index 4ef4546..f8fb281 100644 (file)
@@ -114,6 +114,14 @@ define Device/hc5962
 endef
 TARGET_DEVICES += hc5962
 
+define Device/iodata_wn-gx300gr
+  DTS := WN-GX300GR
+  IMAGE_SIZE := 7798784
+  DEVICE_TITLE := I-O DATA WN-GX300GR
+  DEVICE_PACKAGES := kmod-mt7603 wpad-mini
+endef
+TARGET_DEVICES += iodata_wn-gx300gr
+
 define Device/k2p
   DTS := K2P
   IMAGE_SIZE := $(ralink_default_fw_size_16M)