mtd: base-files: Unify dual-firmware devices (Linksys)
authorJeff Kletsky <git-commits@allycomm.com>
Wed, 10 Apr 2019 15:28:01 +0000 (08:28 -0700)
committerChristian Lamparter <chunkeey@gmail.com>
Sat, 18 May 2019 11:43:51 +0000 (13:43 +0200)
Consistently handle boot-count reset and upgrade across
ipq40xx, ipq806x, kirkwood, mvebu

Dual-firmware devices often utilize a specific MTD partition
to record the number of times the boot loader has initiated boot.

Most of these devices are NAND, typically with a 2k erase size.
When this code was ported to the ipq40xx platform, the device in hand
used NOR for this partition, with a 16-byte "record" size. As the
implementation of `mtd resetbc` is by-platform, the hard-coded nature
of this change prevented proper operation of a NAND-based device.

* Unified the "NOR" variant with the rest of the Linksys variants

* Added logging to indicate success and failure

* Provided a meaningful return value for scripting

* "Protected" the use of `mtd resetbc` in start-up scripts so that
   failure does not end the boot sequence

* Moved Linksys-specific actions into common `/etc/init.d/bootcount`

For upgrade, these devices need to determine which partition to flash,
as well as set certain U-Boot envirnment variables to change the next
boot to the newly flashed version.

* Moved upgrade-related environment changes out of bootcount

* Combined multiple flashes of environment into single one

* Current-partition detection now handles absence of `boot_part`

Runtime-tested: Linksys EA8300

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[checkpatch.pl fixes, traded split strings for 80+ chars per line]

15 files changed:
package/system/mtd/src/Makefile
package/system/mtd/src/linksys_bootcount.c
package/system/mtd/src/linksys_bootcount_fix.c [deleted file]
target/linux/ipq40xx/base-files/etc/init.d/bootcount
target/linux/ipq40xx/base-files/etc/init.d/zlinksys_recovery [deleted file]
target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
target/linux/ipq806x/base-files/etc/init.d/bootcount [new file with mode: 0755]
target/linux/ipq806x/base-files/etc/init.d/linksys_recovery [deleted file]
target/linux/ipq806x/base-files/lib/upgrade/linksys.sh
target/linux/kirkwood/base-files/etc/init.d/bootcount [new file with mode: 0755]
target/linux/kirkwood/base-files/etc/init.d/linksys_recovery [deleted file]
target/linux/kirkwood/base-files/lib/upgrade/linksys.sh
target/linux/mvebu/base-files/etc/init.d/bootcount [new file with mode: 0755]
target/linux/mvebu/base-files/etc/init.d/linksys_recovery [deleted file]
target/linux/mvebu/base-files/lib/upgrade/linksys.sh

index 08a9fb295dac9f37aaf35a846a81f8502d35c313..e469e23ef7b3fbcb694156347312f6b2f77b0564 100644 (file)
@@ -16,7 +16,7 @@ obj.ramips = $(obj.seama) $(obj.tpl) $(obj.wrg)
 obj.mvebu = linksys_bootcount.o
 obj.kirkwood = linksys_bootcount.o
 obj.ipq806x = linksys_bootcount.o
-obj.ipq40xx = linksys_bootcount_fix.o
+obj.ipq40xx = linksys_bootcount.o
 
 ifdef FIS_SUPPORT
   obj += fis.o
index 500ede497276b1d1c7e53d504c6a64cec06766f5..bd06728696ce3f01875789b6bdfaa83ba8bc4e24 100644 (file)
@@ -2,6 +2,7 @@
  * Linksys boot counter reset code for mtd
  *
  * Copyright (C) 2013 Jonas Gorski <jogo@openwrt.org>
+ * Portions Copyright (c) 2019, Jeff Kletsky
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License v2
@@ -29,6 +30,7 @@
 #include <string.h>
 #include <errno.h>
 #include <stdint.h>
+#include <syslog.h>
 
 #include <sys/ioctl.h>
 #include <mtd/mtd-user.h>
 
 #define BOOTCOUNT_MAGIC        0x20110811
 
+/*
+ * EA6350v3, and potentially other NOR-boot devices,
+ * use an offset increment of 16 between records,
+ * not mtd_info_user.writesize (often 1 on NOR devices).
+ */
+
+#define BC_OFFSET_INCREMENT_MIN 16
+
+
+
+#define DLOG_OPEN()
+
+#define DLOG_ERR(...) do {                                                    \
+               fprintf(stderr, "ERROR: " __VA_ARGS__); fprintf(stderr, "\n"); \
+       } while (0)
+
+#define DLOG_NOTICE(...) do {                                          \
+               fprintf(stderr, __VA_ARGS__); fprintf(stderr, "\n");    \
+       } while (0)
+
+#define DLOG_DEBUG(...)
+
+
+
 struct bootcounter {
        uint32_t magic;
        uint32_t count;
@@ -50,25 +76,50 @@ int mtd_resetbc(const char *mtd)
        struct mtd_info_user mtd_info;
        struct bootcounter *curr = (struct bootcounter *)page;
        unsigned int i;
+       unsigned int bc_offset_increment;
        int last_count = 0;
        int num_bc;
        int fd;
        int ret;
+       int retval = 0;
+
+       DLOG_OPEN();
 
        fd = mtd_check_open(mtd);
 
        if (ioctl(fd, MEMGETINFO, &mtd_info) < 0) {
-               fprintf(stderr, "failed to get mtd info!\n");
-               return -1;
+               DLOG_ERR("Unable to obtain mtd_info for given partition name.");
+
+               retval = -1;
+               goto out;
+       }
+
+
+       /* Detect need to override increment (for EA6350v3) */
+
+       if (mtd_info.writesize < BC_OFFSET_INCREMENT_MIN) {
+
+               bc_offset_increment = BC_OFFSET_INCREMENT_MIN;
+               DLOG_DEBUG("Offset increment set to %i for writesize of %i",
+                          bc_offset_increment, mtd_info.writesize);
+       } else {
+
+               bc_offset_increment = mtd_info.writesize;
        }
 
-       num_bc = mtd_info.size / mtd_info.writesize;
+       num_bc = mtd_info.size / bc_offset_increment;
 
        for (i = 0; i < num_bc; i++) {
-               pread(fd, curr, sizeof(*curr), i * mtd_info.writesize);
+               pread(fd, curr, sizeof(*curr), i * bc_offset_increment);
+
+               /* Existing code assumes erase is to 0xff; left as-is (2019) */
 
-               if (curr->magic != BOOTCOUNT_MAGIC && curr->magic != 0xffffffff) {
-                       fprintf(stderr, "unexpected magic %08x, bailing out\n", curr->magic);
+               if (curr->magic != BOOTCOUNT_MAGIC &&
+                   curr->magic != 0xffffffff) {
+                       DLOG_ERR("Unexpected magic %08x at offset %08x; aborting.",
+                                curr->magic, i * bc_offset_increment);
+
+                       retval = -2;
                        goto out;
                }
 
@@ -78,38 +129,59 @@ int mtd_resetbc(const char *mtd)
                last_count = curr->count;
        }
 
-       /* no need to do writes when last boot count is already 0 */
-       if (last_count == 0)
+
+       if (last_count == 0) {  /* bootcount is already 0 */
+
+               retval = 0;
                goto out;
+       }
 
 
        if (i == num_bc) {
+               DLOG_NOTICE("Boot-count log full with %i entries; erasing (expected occasionally).",
+                           i);
+
                struct erase_info_user erase_info;
                erase_info.start = 0;
                erase_info.length = mtd_info.size;
 
-               /* erase block */
                ret = ioctl(fd, MEMERASE, &erase_info);
                if (ret < 0) {
-                       fprintf(stderr, "failed to erase block: %i\n", ret);
-                       return -1;
+                       DLOG_ERR("Failed to erase boot-count log MTD; ioctl() MEMERASE returned %i",
+                                ret);
+
+                       retval = -3;
+                       goto out;
                }
 
                i = 0;
        }
 
-       memset(curr, 0xff, mtd_info.writesize);
+       memset(curr, 0xff, bc_offset_increment);
 
        curr->magic = BOOTCOUNT_MAGIC;
        curr->count = 0;
        curr->checksum = BOOTCOUNT_MAGIC;
 
-       ret = pwrite(fd, curr, mtd_info.writesize, i * mtd_info.writesize);
-       if (ret < 0)
-               fprintf(stderr, "failed to write: %i\n", ret);
-       sync();
+       /* Assumes bc_offset_increment is a multiple of mtd_info.writesize */
+
+       ret = pwrite(fd, curr, bc_offset_increment, i * bc_offset_increment);
+       if (ret < 0) {
+               DLOG_ERR("Failed to write boot-count log entry; pwrite() returned %i",
+                        errno);
+               retval = -4;
+               goto out;
+
+       } else {
+               sync();
+
+               DLOG_NOTICE("Boot count sucessfully reset to zero.");
+
+               retval = 0;
+               goto out;
+       }
+
 out:
        close(fd);
-
-       return 0;
+       return retval;
 }
diff --git a/package/system/mtd/src/linksys_bootcount_fix.c b/package/system/mtd/src/linksys_bootcount_fix.c
deleted file mode 100644 (file)
index 3fc3801..0000000
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Linksys boot counter reset code for mtd
- *
- * Copyright (C) 2013 Jonas Gorski <jogo@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License v2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stddef.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <sys/mman.h>
-#include <sys/stat.h>
-#include <endian.h>
-#include <string.h>
-#include <errno.h>
-#include <stdint.h>
-
-#include <sys/ioctl.h>
-#include <mtd/mtd-user.h>
-
-#include "mtd.h"
-
-#define BOOTCOUNT_MAGIC        0x20110811
-
-struct bootcounter {
-       uint32_t magic;
-       uint32_t count;
-       uint32_t checksum;
-};
-
-static char page[2048];
-
-int mtd_resetbc(const char *mtd)
-{
-       struct mtd_info_user mtd_info;
-       struct bootcounter *curr = (struct bootcounter *)page;
-       unsigned int i;
-       int last_count = 0;
-       int num_bc;
-       int fd;
-       int ret;
-
-       fd = mtd_check_open(mtd);
-
-       if (ioctl(fd, MEMGETINFO, &mtd_info) < 0) {
-               fprintf(stderr, "failed to get mtd info!\n");
-               return -1;
-       }
-
-       num_bc = mtd_info.size / 16;
-
-       for (i = 0; i < num_bc; i++) {
-               pread(fd, curr, sizeof(*curr), i * 16);
-
-               if (curr->magic != (BOOTCOUNT_MAGIC) && curr->magic != 0xffffffff) {
-                       fprintf(stderr, "unexpected magic %08x, bailing out\n", curr->magic);
-                       goto out;
-               }
-
-               if (curr->magic == 0xffffffff)
-                       break;
-
-               last_count = curr->count;
-       }
-
-       /* no need to do writes when last boot count is already 0 */
-       if (last_count == 0)
-               goto out;
-
-
-       if (i == num_bc) {
-               struct erase_info_user erase_info;
-               erase_info.start = 0;
-               erase_info.length = mtd_info.size;
-
-               /* erase block */
-               ret = ioctl(fd, MEMERASE, &erase_info);
-               if (ret < 0) {
-                       fprintf(stderr, "failed to erase block: %i\n", ret);
-                       return -1;
-               }
-
-               i = 0;
-       }
-
-       memset(curr, 0xff, 16);
-
-       curr->magic = BOOTCOUNT_MAGIC;
-       curr->count = 0;
-       curr->checksum = BOOTCOUNT_MAGIC;
-
-       ret = pwrite(fd, curr, 16, i * 16);
-       if (ret < 0)
-               fprintf(stderr, "failed to write: %i\n", ret);
-       sync();
-out:
-       close(fd);
-
-       return 0;
-}
index 604f88c396d8da3d6ff7c0794e2c2738b65e873c..abde12412a3cfa7fbe68b48e9f07b1443b8c4496 100755 (executable)
@@ -10,5 +10,8 @@ start() {
                [ -n "$(fw_printenv bootcount changed 2>/dev/null)" ] &&\
                        echo -e "bootcount\nchanged\n" | /usr/sbin/fw_setenv -s -
                ;;
+       linksys,ea6350v3)
+               mtd resetbc s_env || true
+               ;;
        esac
 }
diff --git a/target/linux/ipq40xx/base-files/etc/init.d/zlinksys_recovery b/target/linux/ipq40xx/base-files/etc/init.d/zlinksys_recovery
deleted file mode 100755 (executable)
index ac6533e..0000000
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh /etc/rc.common
-#
-# This script sets auto_recovery to "yes" and resets the boot counter to 0.
-# As a golden rule, this should be the latest script to run at boot. For a
-# developer snapshot, it is fine to set auto_recovery here. But for a stable
-# release, this script must in fact turn off auto_recovery.
-#
-# Why? Because the custom sysupgrade script for the device will turn on
-# auto_recovery to "yes". And it's the job of this script to set the
-# boot boot_count to 0 and then disable auto_recovery, as that condition
-# means that the stable release went well.
-#
-# I have to repeat: this script should be changed for stable releases.
-
-START=99
-boot() {
-       . /lib/functions.sh
-
-       case $(board_name) in
-               linksys,ea6350v3)
-                       # make sure auto_recovery in uboot is always on
-                       IS_AUTO_RECOVERY="$(fw_printenv -n auto_recovery)"
-                       if [ "$IS_AUTO_RECOVERY" != "yes" ] ; then
-                               fw_setenv auto_recovery yes
-                               echo "Linksys EA6350v3: fw_setenv: auto_recovery has been set to yes"
-                       fi
-                       # reset the boot counter
-                       fw_setenv boot_count 0
-                       mtd resetbc s_env
-                       echo "Linksys EA6350v3: boot counter has been reset"
-                       echo "Linksys EA6350v3: boot_part=$(fw_printenv -n boot_part)"
-                       ;;
-       esac
-}
index 9772d68f3d36450481e5873b7088def2f914c6f0..b8e6dd7352460fe17da9a1f8a72e040ac6c16574 100755 (executable)
@@ -1,26 +1,51 @@
 linksys_get_target_firmware() {
+
+       local cur_boot_part mtd_ubi0
+
        cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part)
-       target_firmware=""
-       if [ "$cur_boot_part" = "1" ]; then
-               # current primary boot - update alt boot
-               target_firmware="alt_kernel"
-               fw_setenv boot_part 2
-               # In the Linksys EA6350v3, it is enough to set the boot_part as the boot command line is
-               # bootcmd=if test $boot_part = 1; then run bootpart1; else run bootpart2; fi
-               # - You probably want to use that if your device's uboot does not eval bootcmd
-               #fw_setenv bootcmd "run altnandboot"
-       elif [ "$cur_boot_part" = "2" ]; then
-               # current alt boot - update primary boot
-               target_firmware="kernel"
-               fw_setenv boot_part 1
-               #fw_setenv bootcmd "run nandboot"
+       if [ -z "${cur_boot_part}" ] ; then
+               mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
+               case $(egrep "^mtd${mtd_ubi0}:" /proc/mtd | cut -d '"' -f 2) in
+               kernel|rootfs)
+                       cur_boot_part=1
+                       ;;
+               alt_kernel|alt_rootfs)
+                       cur_boot_part=2
+                       ;;
+               esac
+               >&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
+                       "${cur_boot_part}" "${mtd_ubi0}"
        fi
 
-       # re-enable recovery so we get back if the new firmware is broken
-       fw_setenv auto_recovery yes
-       # see /etc/init.d/zlinksys_recovery
+       # OEM U-Boot for EA6350v3 and EA8300; bootcmd=
+       #  if test $auto_recovery = no;
+       #      then bootipq;
+       #  elif test $boot_part = 1;
+       #      then run bootpart1;
+       #      else run bootpart2;
+       #  fi
 
-       echo "$target_firmware"
+       case $cur_boot_part in
+       1)
+               fw_setenv -s - <<-EOF
+                       boot_part 2
+                       auto_recovery yes
+               EOF
+               printf "alt_kernel"
+               return
+               ;;
+       2)
+               fw_setenv -s - <<-EOF
+                       boot_part 1
+                       auto_recovery yes
+               EOF
+               printf "kernel"
+               return
+               ;;
+       *)
+               return
+               ;;
+       esac
 }
 
 linksys_get_root_magic() {
diff --git a/target/linux/ipq806x/base-files/etc/init.d/bootcount b/target/linux/ipq806x/base-files/etc/init.d/bootcount
new file mode 100755 (executable)
index 0000000..6a5a6d5
--- /dev/null
@@ -0,0 +1,13 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+start() {
+       . /lib/functions.sh
+
+       case $(board_name) in
+       linksys,ea8500)
+               mtd resetbc s_env || true
+               ;;
+       esac
+}
diff --git a/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery b/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery
deleted file mode 100755 (executable)
index 6b4b38e..0000000
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2015 OpenWrt.org
-
-START=97
-boot() {
-. /lib/functions.sh
-
-case $(board_name) in
-       linksys,ea8500)
-               # make sure auto_recovery in uboot is always on
-               AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
-               if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
-                       fw_setenv auto_recovery yes
-               fi
-               # reset the boot counter
-               mtd resetbc s_env
-               ;;
-esac
-}
index 0234ce0a51a0a92dcd719102f83e19686442574a..2aa6e0f08c88cbf02fd31fa433b76bc7ee85b63c 100644 (file)
@@ -3,28 +3,47 @@
 #
 
 linksys_get_target_firmware() {
-       cur_boot_part=`/usr/sbin/fw_printenv -n boot_part`
-       target_firmware=""
-       if [ "$cur_boot_part" = "1" ]
-       then
-               # current primary boot - update alt boot
-               target_firmware="kernel2"
-               fw_setenv boot_part 2
-               #In EA8500 bootcmd is always "bootipq", so don't change
-               #fw_setenv bootcmd "run altnandboot"
-       elif [ "$cur_boot_part" = "2" ]
-       then
-               # current alt boot - update primary boot
-               target_firmware="kernel1"
-               fw_setenv boot_part 1
-               #In EA8500 bootcmd is always "bootipq", so don't change
-               #fw_setenv bootcmd "run nandboot"
+
+       local cur_boot_part mtd_ubi0
+
+       cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part)
+       if [ -z "${cur_boot_part}" ] ; then
+               mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
+               case $(egrep ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) in
+               kernel1|rootfs1)
+                       cur_boot_part=1
+                       ;;
+               kernel2|rootfs2)
+                       cur_boot_part=2
+                       ;;
+               esac
+               >&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
+                       "${cur_boot_part}" "${mtd_ubi0}"
        fi
 
-       # re-enable recovery so we get back if the new firmware is broken
-       fw_setenv auto_recovery yes
+       cur_boot_part=`/usr/sbin/fw_printenv -n boot_part`
 
-       echo "$target_firmware"
+       case $cur_boot_part in
+       1)
+               fw_setenv -s - <<-EOF
+                       boot_part 2
+                       auto_recovery yes
+               EOF
+               printf "kernel2"
+               return
+               ;;
+       2)
+               fw_setenv -s - <<-EOF
+                       boot_part 1
+                       auto_recovery yes
+               EOF
+               printf "kernel1"
+               return
+               ;;
+       *)
+               return
+               ;;
+       esac
 }
 
 linksys_get_root_magic() {
diff --git a/target/linux/kirkwood/base-files/etc/init.d/bootcount b/target/linux/kirkwood/base-files/etc/init.d/bootcount
new file mode 100755 (executable)
index 0000000..20fb3a4
--- /dev/null
@@ -0,0 +1,14 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+start() {
+       . /lib/functions.sh
+
+       case $(board_name) in
+       linksys,audi|\
+       linksys,viper)
+               mtd resetbc s_env || true
+               ;;
+       esac
+}
diff --git a/target/linux/kirkwood/base-files/etc/init.d/linksys_recovery b/target/linux/kirkwood/base-files/etc/init.d/linksys_recovery
deleted file mode 100755 (executable)
index 8fd2f38..0000000
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2015 OpenWrt.org
-
-START=97
-boot() {
-. /lib/functions.sh
-
-case $(board_name) in
-       linksys,audi|linksys,viper)
-               # make sure auto_recovery in uboot is always on
-               AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
-               if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
-                       fw_setenv auto_recovery yes
-               fi
-               # reset the boot counter
-               mtd resetbc s_env
-               ;;
-esac
-}
index dde3bd1b2190d68ce54e6c2883a45032d58599b2..b89aad3d7ed27eacfeb3050c88433565fa87aed2 100644 (file)
@@ -3,23 +3,45 @@
 #
 
 linksys_get_target_firmware() {
-       cur_boot_part=`/usr/sbin/fw_printenv -n boot_part`
-       target_firmware=""
-       if [ "$cur_boot_part" = "1" ]
-       then
-               # current primary boot - update alt boot
-               target_firmware="kernel2"
-               fw_setenv boot_part 2
-               fw_setenv bootcmd "run altnandboot"
-       elif [ "$cur_boot_part" = "2" ]
-       then
-               # current alt boot - update primary boot
-               target_firmware="kernel1"
-               fw_setenv boot_part 1
-               fw_setenv bootcmd "run nandboot"
+
+       local cur_boot_part mtd_ubi0
+
+       cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part)
+       if [ -z "${cur_boot_part}" ] ; then
+               mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
+               case $(egrep ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) in
+               kernel|rootfs)
+                       cur_boot_part=1
+                       ;;
+               alt_kernel|alt_rootfs)
+                       cur_boot_part=2
+                       ;;
+               esac
+               >&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
+                       "${cur_boot_part}" "${mtd_ubi0}"
        fi
 
-       echo "$target_firmware"
+       case $cur_boot_part in
+       1)
+               fw_setenv -s - <<-EOF
+                       boot_part 2
+                       bootcmd "run altnandboot"
+               EOF
+               printf "kernel2"
+               return
+               ;;
+       2)
+               fw_setenv -s - <<-EOF
+                       boot_part 1
+                       bootcmd "run nandboot"
+               EOF
+               printf "kernel1"
+               return
+               ;;
+       *)
+               return
+               ;;
+       esac
 }
 
 linksys_get_root_magic() {
diff --git a/target/linux/mvebu/base-files/etc/init.d/bootcount b/target/linux/mvebu/base-files/etc/init.d/bootcount
new file mode 100755 (executable)
index 0000000..6e8e310
--- /dev/null
@@ -0,0 +1,18 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+start() {
+       . /lib/functions.sh
+
+       case $(board_name) in
+       linksys,caiman |\
+       linksys,cobra |\
+       linksys,mamba |\
+       linksys,rango |\
+       linksys,shelby |\
+       linksys,venom)
+               mtd resetbc s_env || true
+               ;;
+       esac
+}
diff --git a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
deleted file mode 100755 (executable)
index b4f375e..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2015-2016 OpenWrt.org
-# Copyright (C) 2016 LEDE-Project.org
-
-START=97
-boot() {
-. /lib/functions.sh
-
-case $(board_name) in
-       linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom)
-               # make sure auto_recovery in uboot is always on
-               AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
-               if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
-                       fw_setenv auto_recovery yes
-               fi
-               # reset the boot counter
-               mtd resetbc s_env
-               ;;
-esac
-}
index aacaf55667e84f1c6bf98e9327f44c865ffc3d8c..3f45d6cac5e879f050442b76cf7b4270dc177207 100644 (file)
@@ -3,26 +3,45 @@
 #
 
 linksys_get_target_firmware() {
+
+       local cur_boot_part mtd_ubi0
+
        cur_boot_part=`/usr/sbin/fw_printenv -n boot_part`
-       target_firmware=""
-       if [ "$cur_boot_part" = "1" ]
-       then
-               # current primary boot - update alt boot
-               target_firmware="kernel2"
-               fw_setenv boot_part 2
-               fw_setenv bootcmd "run altnandboot"
-       elif [ "$cur_boot_part" = "2" ]
-       then
-               # current alt boot - update primary boot
-               target_firmware="kernel1"
-               fw_setenv boot_part 1
-               fw_setenv bootcmd "run nandboot"
+       if [ -z "${cur_boot_part}" ] ; then
+               mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
+               case $(egrep ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) in
+               kernel1|rootfs1)
+                       cur_boot_part=1
+                       ;;
+               kernel2|rootfs2)
+                       cur_boot_part=2
+                       ;;
+               esac
+               >&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
+                       "${cur_boot_part}" "${mtd_ubi0}"
        fi
 
-       # re-enable recovery so we get back if the new firmware is broken
-       fw_setenv auto_recovery yes
-
-       echo "$target_firmware"
+       case $cur_boot_part in
+       1)
+               fw_setenv -s - <<-EOF
+                       boot_part 2
+                       bootcmd "run altnandboot"
+               EOF
+               printf "kernel2"
+               return
+               ;;
+       2)
+               fw_setenv -s - <<-EOF
+                       boot_part 1
+                       bootcmd "run nandboot"
+               EOF
+               printf "kernel1"
+               return
+               ;;
+       *)
+               return
+               ;;
+       esac
 }
 
 linksys_get_root_magic() {