imx6: add missing patches from 3.14
authorLuka Perkov <luka@openwrt.org>
Sat, 11 Apr 2015 10:46:20 +0000 (10:46 +0000)
committerLuka Perkov <luka@openwrt.org>
Sat, 11 Apr 2015 10:46:20 +0000 (10:46 +0000)
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45378

target/linux/imx6/patches-3.18/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch [new file with mode: 0644]
target/linux/imx6/patches-3.18/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch [new file with mode: 0644]
target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch [new file with mode: 0644]

diff --git a/target/linux/imx6/patches-3.18/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch b/target/linux/imx6/patches-3.18/203-net-igb-add-phy-read-write-functions-that-accept-phy.patch
new file mode 100644 (file)
index 0000000..7869b1c
--- /dev/null
@@ -0,0 +1,260 @@
+From 16df7dc5901c1cb2a40f6adbd0d9423768ed8210 Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Thu, 15 May 2014 00:29:18 -0700
+Subject: [PATCH] net: igb: add phy read/write functions that accept phy addr
+
+Add igb_write_reg_gs40g/igb_read_reg_gs40g that can be passed a phy address.
+The existing igb_write_phy_reg_gs40g/igb_read_phy_reg_gs40g become wrappers
+to this function.
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ drivers/net/ethernet/intel/igb/e1000_82575.c |  4 +-
+ drivers/net/ethernet/intel/igb/e1000_phy.c   | 74 +++++++++++++++++++---------
+ drivers/net/ethernet/intel/igb/e1000_phy.h   |  6 ++-
+ 3 files changed, 58 insertions(+), 26 deletions(-)
+
+--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
++++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
+@@ -2129,7 +2129,7 @@ static s32 igb_read_phy_reg_82580(struct
+       if (ret_val)
+               goto out;
+-      ret_val = igb_read_phy_reg_mdic(hw, offset, data);
++      ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr, offset, data);
+       hw->phy.ops.release(hw);
+@@ -2154,7 +2154,7 @@ static s32 igb_write_phy_reg_82580(struc
+       if (ret_val)
+               goto out;
+-      ret_val = igb_write_phy_reg_mdic(hw, offset, data);
++      ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr, offset, data);
+       hw->phy.ops.release(hw);
+--- a/drivers/net/ethernet/intel/igb/e1000_phy.c
++++ b/drivers/net/ethernet/intel/igb/e1000_phy.c
+@@ -132,9 +132,8 @@ out:
+  *  Reads the MDI control regsiter in the PHY at offset and stores the
+  *  information read to data.
+  **/
+-s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
++s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
+ {
+-      struct e1000_phy_info *phy = &hw->phy;
+       u32 i, mdicnfg, mdic = 0;
+       s32 ret_val = 0;
+@@ -153,14 +152,14 @@ s32 igb_read_phy_reg_mdic(struct e1000_h
+       case e1000_i211:
+               mdicnfg = rd32(E1000_MDICNFG);
+               mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+-              mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
++              mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
+               wr32(E1000_MDICNFG, mdicnfg);
+               mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+                       (E1000_MDIC_OP_READ));
+               break;
+       default:
+               mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+-                      (phy->addr << E1000_MDIC_PHY_SHIFT) |
++                      (addr << E1000_MDIC_PHY_SHIFT) |
+                       (E1000_MDIC_OP_READ));
+               break;
+       }
+@@ -214,9 +213,8 @@ out:
+  *
+  *  Writes data to MDI control register in the PHY at offset.
+  **/
+-s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
++s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
+ {
+-      struct e1000_phy_info *phy = &hw->phy;
+       u32 i, mdicnfg, mdic = 0;
+       s32 ret_val = 0;
+@@ -235,7 +233,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
+               case e1000_i211:
+                       mdicnfg = rd32(E1000_MDICNFG);
+                       mdicnfg &= ~(E1000_MDICNFG_PHY_MASK);
+-                      mdicnfg |= (phy->addr << E1000_MDICNFG_PHY_SHIFT);
++                      mdicnfg |= (addr << E1000_MDICNFG_PHY_SHIFT);
+                       wr32(E1000_MDICNFG, mdicnfg);
+                       mdic = (((u32)data) |
+                               (offset << E1000_MDIC_REG_SHIFT) |
+@@ -244,7 +242,7 @@ s32 igb_write_phy_reg_mdic(struct e1000_
+               default:
+                       mdic = (((u32)data) |
+                               (offset << E1000_MDIC_REG_SHIFT) |
+-                              (phy->addr << E1000_MDIC_PHY_SHIFT) |
++                              (addr << E1000_MDIC_PHY_SHIFT) |
+                               (E1000_MDIC_OP_WRITE));
+                       break;
+       }
+@@ -464,7 +462,7 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
+               goto out;
+       if (offset > MAX_PHY_MULTI_PAGE_REG) {
+-              ret_val = igb_write_phy_reg_mdic(hw,
++              ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
+                                                IGP01E1000_PHY_PAGE_SELECT,
+                                                (u16)offset);
+               if (ret_val) {
+@@ -473,8 +471,8 @@ s32 igb_read_phy_reg_igp(struct e1000_hw
+               }
+       }
+-      ret_val = igb_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+-                                      data);
++      ret_val = igb_read_phy_reg_mdic(hw, hw->phy.addr,
++                                      MAX_PHY_REG_ADDRESS & offset, data);
+       hw->phy.ops.release(hw);
+@@ -503,7 +501,7 @@ s32 igb_write_phy_reg_igp(struct e1000_h
+               goto out;
+       if (offset > MAX_PHY_MULTI_PAGE_REG) {
+-              ret_val = igb_write_phy_reg_mdic(hw,
++              ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
+                                                IGP01E1000_PHY_PAGE_SELECT,
+                                                (u16)offset);
+               if (ret_val) {
+@@ -512,8 +510,8 @@ s32 igb_write_phy_reg_igp(struct e1000_h
+               }
+       }
+-      ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+-                                       data);
++      ret_val = igb_write_phy_reg_mdic(hw, hw->phy.addr,
++                                       MAX_PHY_REG_ADDRESS & offset, data);
+       hw->phy.ops.release(hw);
+@@ -2464,8 +2462,9 @@ out:
+ }
+ /**
+- *  igb_write_phy_reg_gs40g - Write GS40G PHY register
++ *  igb_write_reg_gs40g - Write GS40G PHY register
+  *  @hw: pointer to the HW structure
++ *  @addr: phy address to write to
+  *  @offset: lower half is register offset to write to
+  *     upper half is page to use.
+  *  @data: data to write at register offset
+@@ -2473,7 +2472,7 @@ out:
+  *  Acquires semaphore, if necessary, then writes the data to PHY register
+  *  at the offset.  Release any acquired semaphores before exiting.
+  **/
+-s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
++s32 igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data)
+ {
+       s32 ret_val;
+       u16 page = offset >> GS40G_PAGE_SHIFT;
+@@ -2483,10 +2482,10 @@ s32 igb_write_phy_reg_gs40g(struct e1000
+       if (ret_val)
+               return ret_val;
+-      ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
++      ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
+       if (ret_val)
+               goto release;
+-      ret_val = igb_write_phy_reg_mdic(hw, offset, data);
++      ret_val = igb_write_phy_reg_mdic(hw, addr, offset, data);
+ release:
+       hw->phy.ops.release(hw);
+@@ -2494,8 +2493,24 @@ release:
+ }
+ /**
+- *  igb_read_phy_reg_gs40g - Read GS40G  PHY register
++ *  igb_write_phy_reg_gs40g - Write GS40G PHY register
++ *  @hw: pointer to the HW structure
++ *  @offset: lower half is register offset to write to
++ *     upper half is page to use.
++ *  @data: data to write at register offset
++ *
++ *  Acquires semaphore, if necessary, then writes the data to PHY register
++ *  at the offset.  Release any acquired semaphores before exiting.
++ **/
++s32 igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data)
++{
++      return igb_write_reg_gs40g(hw, hw->phy.addr, offset, data);
++}
++
++/**
++ *  igb_read_reg_gs40g - Read GS40G  PHY register
+  *  @hw: pointer to the HW structure
++ *  @addr: phy address to read from
+  *  @offset: lower half is register offset to read to
+  *     upper half is page to use.
+  *  @data: data to read at register offset
+@@ -2503,7 +2518,7 @@ release:
+  *  Acquires semaphore, if necessary, then reads the data in the PHY register
+  *  at the offset.  Release any acquired semaphores before exiting.
+  **/
+-s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
++s32 igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data)
+ {
+       s32 ret_val;
+       u16 page = offset >> GS40G_PAGE_SHIFT;
+@@ -2513,10 +2528,10 @@ s32 igb_read_phy_reg_gs40g(struct e1000_
+       if (ret_val)
+               return ret_val;
+-      ret_val = igb_write_phy_reg_mdic(hw, GS40G_PAGE_SELECT, page);
++      ret_val = igb_write_phy_reg_mdic(hw, addr, GS40G_PAGE_SELECT, page);
+       if (ret_val)
+               goto release;
+-      ret_val = igb_read_phy_reg_mdic(hw, offset, data);
++      ret_val = igb_read_phy_reg_mdic(hw, addr, offset, data);
+ release:
+       hw->phy.ops.release(hw);
+@@ -2524,6 +2539,21 @@ release:
+ }
+ /**
++ *  igb_read_phy_reg_gs40g - Read GS40G  PHY register
++ *  @hw: pointer to the HW structure
++ *  @offset: lower half is register offset to read to
++ *     upper half is page to use.
++ *  @data: data to read at register offset
++ *
++ *  Acquires semaphore, if necessary, then reads the data in the PHY register
++ *  at the offset.  Release any acquired semaphores before exiting.
++ **/
++s32 igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data)
++{
++      return igb_read_reg_gs40g(hw, hw->phy.addr, offset, data);
++}
++
++/**
+  *  igb_set_master_slave_mode - Setup PHY for Master/slave mode
+  *  @hw: pointer to the HW structure
+  *
+--- a/drivers/net/ethernet/intel/igb/e1000_phy.h
++++ b/drivers/net/ethernet/intel/igb/e1000_phy.h
+@@ -61,8 +61,8 @@ s32  igb_phy_has_link(struct e1000_hw *h
+ void igb_power_up_phy_copper(struct e1000_hw *hw);
+ void igb_power_down_phy_copper(struct e1000_hw *hw);
+ s32  igb_phy_init_script_igp3(struct e1000_hw *hw);
+-s32  igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
+-s32  igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
++s32  igb_read_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
++s32  igb_write_phy_reg_mdic(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
+ s32  igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
+ s32  igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
+ s32  igb_read_sfp_data_byte(struct e1000_hw *hw, u16 offset, u8 *data);
+@@ -72,6 +72,8 @@ s32  igb_phy_force_speed_duplex_82580(st
+ s32  igb_get_cable_length_82580(struct e1000_hw *hw);
+ s32  igb_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data);
+ s32  igb_write_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 data);
++s32  igb_read_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 *data);
++s32  igb_write_reg_gs40g(struct e1000_hw *hw, u8 addr, u32 offset, u16 data);
+ s32  igb_check_polarity_m88(struct e1000_hw *hw);
+ /* IGP01E1000 Specific Registers */
diff --git a/target/linux/imx6/patches-3.18/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch b/target/linux/imx6/patches-3.18/204-net-igb-register-mii_bus-for-SerDes-w-external-phy.patch
new file mode 100644 (file)
index 0000000..d503e91
--- /dev/null
@@ -0,0 +1,308 @@
+From 03855caf93f7332a3f320228ba1a0e7baae8a749 Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Thu, 15 May 2014 12:36:23 -0700
+Subject: [PATCH] net: igb: register mii_bus for SerDes w/ external phy
+
+If an i210 is configured for 1000BASE-BX link_mode and has an external phy
+specified, then register an mii bus using the external phy address as
+a mask.
+
+An i210 hooked to an external standard phy will be configured with a link_mo
+of SGMII in which case phy ops will be configured and used internall in the
+igb driver for link status. However, in certain cases one might be using a
+backplane SerDes connection to something that talks on the mdio bus but is
+not a standard phy, such as a switch. In this case by registering an mdio
+bus a phy driver can manage the device.
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ drivers/net/ethernet/intel/igb/e1000_82575.c |  15 +++
+ drivers/net/ethernet/intel/igb/e1000_hw.h    |   7 ++
+ drivers/net/ethernet/intel/igb/igb_main.c    | 168 ++++++++++++++++++++++++++-
+ 3 files changed, 185 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
++++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
+@@ -598,13 +598,25 @@ static s32 igb_get_invariants_82575(stru
+       switch (link_mode) {
+       case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+               hw->phy.media_type = e1000_media_type_internal_serdes;
++              if (igb_sgmii_uses_mdio_82575(hw)) {
++                      u32 mdicnfg = rd32(E1000_MDICNFG);
++                      mdicnfg &= E1000_MDICNFG_PHY_MASK;
++                      hw->phy.addr = mdicnfg >> E1000_MDICNFG_PHY_SHIFT;
++                      hw_dbg("1000BASE_KX w/ external MDIO device at 0x%x\n",
++                             hw->phy.addr);
++              } else {
++                      hw_dbg("1000BASE_KX");
++              }
+               break;
+       case E1000_CTRL_EXT_LINK_MODE_SGMII:
+               /* Get phy control interface type set (MDIO vs. I2C)*/
+               if (igb_sgmii_uses_mdio_82575(hw)) {
+                       hw->phy.media_type = e1000_media_type_copper;
+                       dev_spec->sgmii_active = true;
++                      hw_dbg("SGMII with external MDIO PHY");
+                       break;
++              } else {
++                      hw_dbg("SGMII with external I2C PHY");
+               }
+               /* fall through for I2C based SGMII */
+       case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
+@@ -621,8 +633,11 @@ static s32 igb_get_invariants_82575(stru
+                               hw->phy.media_type = e1000_media_type_copper;
+                               dev_spec->sgmii_active = true;
+                       }
++                      hw_dbg("SERDES with external SFP");
+                       break;
++              } else {
++                      hw_dbg("SERDES");
+               }
+               /* do not change link mode for 100BaseFX */
+--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
++++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
+@@ -27,6 +27,7 @@
+ #include <linux/delay.h>
+ #include <linux/io.h>
+ #include <linux/netdevice.h>
++#include <linux/phy.h>
+ #include "e1000_regs.h"
+ #include "e1000_defines.h"
+@@ -543,6 +544,12 @@ struct e1000_hw {
+       struct e1000_mbx_info mbx;
+       struct e1000_host_mng_dhcp_cookie mng_cookie;
++#ifdef CONFIG_PHYLIB
++      /* Phylib and MDIO interface */
++      struct mii_bus *mii_bus;
++      struct phy_device *phy_dev;
++      phy_interface_t phy_interface;
++#endif
+       union {
+               struct e1000_dev_spec_82575     _82575;
+       } dev_spec;
+--- a/drivers/net/ethernet/intel/igb/igb_main.c
++++ b/drivers/net/ethernet/intel/igb/igb_main.c
+@@ -41,6 +41,7 @@
+ #include <linux/if_vlan.h>
+ #include <linux/pci.h>
+ #include <linux/pci-aspm.h>
++#include <linux/phy.h>
+ #include <linux/delay.h>
+ #include <linux/interrupt.h>
+ #include <linux/ip.h>
+@@ -2231,6 +2232,126 @@ static s32 igb_init_i2c(struct igb_adapt
+       return status;
+ }
++
++#ifdef CONFIG_PHYLIB
++/*
++ * MMIO/PHYdev support
++ */
++
++static int igb_enet_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
++{
++      struct e1000_hw *hw = bus->priv;
++      u16 out;
++      int err;
++
++      err = igb_read_reg_gs40g(hw, mii_id, regnum, &out);
++      if (err)
++              return err;
++      return out;
++}
++
++static int igb_enet_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
++                               u16 val)
++{
++      struct e1000_hw *hw = bus->priv;
++
++      return igb_write_reg_gs40g(hw, mii_id, regnum, val);
++}
++
++static int igb_enet_mdio_reset(struct mii_bus *bus)
++{
++      udelay(300);
++      return 0;
++}
++
++static void igb_enet_mii_link(struct net_device *netdev)
++{
++}
++
++/* Probe the mdio bus for phys and connect them */
++static int igb_enet_mii_probe(struct net_device *netdev)
++{
++      struct igb_adapter *adapter = netdev_priv(netdev);
++      struct e1000_hw *hw = &adapter->hw;
++      struct phy_device *phy_dev = NULL;
++      int phy_id;
++
++      /* check for attached phy */
++      for (phy_id = 0; (phy_id < PHY_MAX_ADDR); phy_id++) {
++              if (hw->mii_bus->phy_map[phy_id]) {
++                      phy_dev = hw->mii_bus->phy_map[phy_id];
++                      break;
++              }
++      }
++      if (!phy_dev) {
++              netdev_err(netdev, "no PHY found\n");
++              return -ENODEV;
++      }
++
++      hw->phy_interface = PHY_INTERFACE_MODE_RGMII;
++      phy_dev = phy_connect(netdev, dev_name(&phy_dev->dev),
++                            igb_enet_mii_link, hw->phy_interface);
++      if (IS_ERR(phy_dev)) {
++              netdev_err(netdev, "could not attach to PHY\n");
++              return PTR_ERR(phy_dev);
++      }
++
++      hw->phy_dev = phy_dev;
++      netdev_info(netdev, "igb PHY driver [%s] (mii_bus:phy_addr=%s)\n",
++              hw->phy_dev->drv->name, dev_name(&hw->phy_dev->dev));
++
++      return 0;
++}
++
++/* Create and register mdio bus */
++static int igb_enet_mii_init(struct pci_dev *pdev)
++{
++      struct mii_bus *mii_bus;
++      struct net_device *netdev = pci_get_drvdata(pdev);
++      struct igb_adapter *adapter = netdev_priv(netdev);
++      struct e1000_hw *hw = &adapter->hw;
++      int err;
++
++      mii_bus = mdiobus_alloc();
++      if (mii_bus == NULL) {
++              err = -ENOMEM;
++              goto err_out;
++      }
++
++      mii_bus->name = "igb_enet_mii_bus";
++      mii_bus->read = igb_enet_mdio_read;
++      mii_bus->write = igb_enet_mdio_write;
++      mii_bus->reset = igb_enet_mdio_reset;
++      snprintf(mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
++               pci_name(pdev), hw->device_id + 1);
++      mii_bus->priv = hw;
++      mii_bus->parent = &pdev->dev;
++      mii_bus->phy_mask = ~(1 << hw->phy.addr);
++
++      err = mdiobus_register(mii_bus);
++      if (err) {
++              printk(KERN_ERR "failed to register mii_bus: %d\n", err);
++              goto err_out_free_mdiobus;
++      }
++      hw->mii_bus = mii_bus;
++
++      return 0;
++
++err_out_free_mdiobus:
++      mdiobus_free(mii_bus);
++err_out:
++      return err;
++}
++
++static void igb_enet_mii_remove(struct e1000_hw *hw)
++{
++      if (hw->mii_bus) {
++              mdiobus_unregister(hw->mii_bus);
++              mdiobus_free(hw->mii_bus);
++      }
++}
++#endif /* CONFIG_PHYLIB */
++
+ /**
+  *  igb_probe - Device Initialization Routine
+  *  @pdev: PCI device information struct
+@@ -2653,6 +2774,13 @@ static int igb_probe(struct pci_dev *pde
+               }
+       }
+       pm_runtime_put_noidle(&pdev->dev);
++
++#ifdef CONFIG_PHYLIB
++      /* create and register the mdio bus if using ext phy */
++      if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
++              igb_enet_mii_init(pdev);
++#endif
++
+       return 0;
+ err_register:
+@@ -2796,6 +2924,10 @@ static void igb_remove(struct pci_dev *p
+       struct e1000_hw *hw = &adapter->hw;
+       pm_runtime_get_noresume(&pdev->dev);
++#ifdef CONFIG_PHYLIB
++      if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
++              igb_enet_mii_remove(hw);
++#endif
+ #ifdef CONFIG_IGB_HWMON
+       igb_sysfs_exit(adapter);
+ #endif
+@@ -3101,6 +3233,12 @@ static int __igb_open(struct net_device
+       if (!resuming)
+               pm_runtime_put(&pdev->dev);
++#ifdef CONFIG_PHYLIB
++      /* Probe and connect to PHY if using ext phy */
++      if (rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO)
++              igb_enet_mii_probe(netdev);
++#endif
++
+       /* start the watchdog. */
+       hw->mac.get_link_status = 1;
+       schedule_work(&adapter->watchdog_task);
+@@ -7097,21 +7235,41 @@ void igb_alloc_rx_buffers(struct igb_rin
+ static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+ {
+       struct igb_adapter *adapter = netdev_priv(netdev);
++      struct e1000_hw *hw = &adapter->hw;
+       struct mii_ioctl_data *data = if_mii(ifr);
+-      if (adapter->hw.phy.media_type != e1000_media_type_copper)
++      if (adapter->hw.phy.media_type != e1000_media_type_copper &&
++          !(rd32(E1000_MDICNFG) & E1000_MDICNFG_EXT_MDIO))
+               return -EOPNOTSUPP;
+       switch (cmd) {
+       case SIOCGMIIPHY:
+-              data->phy_id = adapter->hw.phy.addr;
++              data->phy_id = hw->phy.addr;
+               break;
+       case SIOCGMIIREG:
+-              if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+-                                   &data->val_out))
+-                      return -EIO;
++              if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
++                      if (igb_read_reg_gs40g(&adapter->hw, data->phy_id,
++                                             data->reg_num & 0x1F,
++                                             &data->val_out))
++                              return -EIO;
++              } else {
++                      if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
++                                           &data->val_out))
++                              return -EIO;
++              }
+               break;
+       case SIOCSMIIREG:
++              if (hw->mac.type == e1000_i210 || hw->mac.type == e1000_i211) {
++                      if (igb_write_reg_gs40g(hw, data->phy_id,
++                                              data->reg_num & 0x1F,
++                                              data->val_in))
++                              return -EIO;
++              } else {
++                      if (igb_write_phy_reg(hw, data->reg_num & 0x1F,
++                                            data->val_in))
++                              return -EIO;
++              }
++              break;
+       default:
+               return -EOPNOTSUPP;
+       }
diff --git a/target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch b/target/linux/imx6/patches-3.18/207-ARM-dts-imx6-ventana-Add-PCI-nodes-for-on-board-PCI-.patch
new file mode 100644 (file)
index 0000000..b581f78
--- /dev/null
@@ -0,0 +1,110 @@
+From 840202d23892baaff74be11ec71c3ffc6ad6298e Mon Sep 17 00:00:00 2001
+From: Tim Harvey <tharvey@gateworks.com>
+Date: Tue, 20 Jan 2015 08:46:55 -0800
+Subject: [PATCH] ARM: dts: imx6 ventana: Add PCI nodes for on-board PCI
+ devices
+
+If the PCI nodes are defined, drivers can access information from the DT.
+For example, the sky2 enet driver can obtain the mac address configured
+from the bootloader (which is applied to the DT node with the ethernet1 alias).
+
+Signed-off-by: Tim Harvey <tharvey@gateworks.com>
+---
+ arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 38 +++++++++++++++++++++++++++++++++--
+ arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 38 +++++++++++++++++++++++++++++++++--
+ 2 files changed, 72 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+@@ -280,8 +280,42 @@
+       reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+       status = "okay";
+-      eth1: sky2@8 { /* MAC/PHY on bus 8 */
+-              compatible = "marvell,sky2";
++      pcie@0,0 {
++              /* 00:00.0 0604: 16c3:abcd root host-bridge */
++              #address-cells = <3>;
++              #size-cells = <2>;
++              device_type = "pci";
++              reg = <0x0 0 0 0 0>;
++
++              pcie@0,0 {
++                      /* 01:00.0 0604: 10b5:8609 PEX switch bridge */
++                      #address-cells = <3>;
++                      #size-cells = <2>;
++                      device_type = "pci";
++                      reg = <0x0 0 0 0 0>;
++
++                      /*
++                       * GigE PCI dev node needs to be defined so that enet
++                       * driver can use it to obtain its boot-loader
++                       * specified MAC
++                       */
++                      pcie@4,0 {
++                              /* 02:04.0 0604: 10b5:8609: PEX port bridge */
++                              #address-cells = <3>;
++                              #size-cells = <2>;
++                              device_type = "pci";
++                              reg = <0x2000 0 0 0 0>;
++
++                              eth1: pci@0,0 {
++                                      /* 04:00.0 0200: 11ab:4380: GigE */
++                                      #address-cells = <3>;
++                                      #size-cells = <2>;
++                                      device_type = "pci";
++                                      reg = <0x0 0 0 0 0>;
++                                      compatible = "marvell,sky2";
++                              };
++                      };
++              };
+       };
+ };
+--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
++++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+@@ -369,8 +369,42 @@
+       reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+       status = "okay";
+-      eth1: sky2@8 { /* MAC/PHY on bus 8 */
+-              compatible = "marvell,sky2";
++      pcie@0,0 {
++              /* 00:00.0 0604: 16c3:abcd root host-bridge */
++              #address-cells = <3>;
++              #size-cells = <2>;
++              device_type = "pci";
++              reg = <0x0 0 0 0 0>;
++
++              pcie@0,0 {
++                      /* 01:00.0 0604: 10b5:8609 PEX switch bridge */
++                      #address-cells = <3>;
++                      #size-cells = <2>;
++                      device_type = "pci";
++                      reg = <0x0 0 0 0 0>;
++
++                      /*
++                       * GigE PCI dev node needs to be defined so that enet
++                       * driver can use it to obtain its boot-loader
++                       * specified MAC
++                       */
++                      pcie@8,0 {
++                              /* 02:08.0 0604: 10b5:8609: PEX port bridge */
++                              #address-cells = <3>;
++                              #size-cells = <2>;
++                              device_type = "pci";
++                              reg = <0x4000 0 0 0 0>;
++
++                              eth1: pci@0,0 {
++                                      /* 08:00.0 0200: 11ab:4380: GigE */
++                                      #address-cells = <3>;
++                                      #size-cells = <2>;
++                                      device_type = "pci";
++                                      reg = <0x0 0 0 0 0>;
++                                      compatible = "marvell,sky2";
++                              };
++                      };
++              };
+       };
+ };