bcm53xx: backport official Buffalo WZR-900DHP patch
authorRafał Miłecki <zajec5@gmail.com>
Wed, 21 Jan 2015 07:23:31 +0000 (07:23 +0000)
committerRafał Miłecki <zajec5@gmail.com>
Wed, 21 Jan 2015 07:23:31 +0000 (07:23 +0000)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44070

19 files changed:
target/linux/bcm53xx/patches-3.14/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch
target/linux/bcm53xx/patches-3.14/053-ARM-BCM5301X-Drop-unused-poll-interval-from-gpio-key.patch
target/linux/bcm53xx/patches-3.14/054-ARM-BCM5301X-Add-LEDs-for-Buffalo-devices.patch
target/linux/bcm53xx/patches-3.14/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch [new file with mode: 0644]
target/linux/bcm53xx/patches-3.14/150-pci-do-not-probe-too-early.patch
target/linux/bcm53xx/patches-3.14/303-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch
target/linux/bcm53xx/patches-3.14/306-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch
target/linux/bcm53xx/patches-3.14/320-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch [deleted file]
target/linux/bcm53xx/patches-3.14/350-ARM-BCM5301X-Switch-DT-files-to-gpio-keys-polled.patch
target/linux/bcm53xx/patches-3.14/351-ARM-BCM5301X-Enable-ChipCommon-UART-serial-console.patch
target/linux/bcm53xx/patches-3.18/052-ARM-BCM5301X-Add-DT-for-Luxul-XWC-1000.patch
target/linux/bcm53xx/patches-3.18/053-ARM-BCM5301X-Drop-unused-poll-interval-from-gpio-key.patch
target/linux/bcm53xx/patches-3.18/054-ARM-BCM5301X-Add-LEDs-for-Buffalo-devices.patch
target/linux/bcm53xx/patches-3.18/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch [new file with mode: 0644]
target/linux/bcm53xx/patches-3.18/303-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch
target/linux/bcm53xx/patches-3.18/306-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch
target/linux/bcm53xx/patches-3.18/320-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch [deleted file]
target/linux/bcm53xx/patches-3.18/350-ARM-BCM5301X-Switch-DT-files-to-gpio-keys-polled.patch
target/linux/bcm53xx/patches-3.18/351-ARM-BCM5301X-Enable-ChipCommon-UART-serial-console.patch

index f0aafa9..dfbab9d 100644 (file)
@@ -1,7 +1,7 @@
-From 0da909663566b34e0294ab0ff1ea08908164811e Mon Sep 17 00:00:00 2001
+From e27a09ae9369e10bc589ef4d720ecf4abcbcec50 Mon Sep 17 00:00:00 2001
 From: Dan Haab <dhaab@luxul.com>
-Date: Wed, 7 Jan 2015 14:34:50 -0700
-Subject: [PATCH 52/54] ARM: BCM5301X: Add DT for Luxul XWC-1000
+Date: Mon, 19 Jan 2015 12:45:37 -0700
+Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWC-1000
 
 Luxul XWC-1000 is a controller device based on BCM4708 SoC. The only
 unusual thing in its DTS file is "ubi" partition on NAND flash.
index 87e9153..177b360 100644 (file)
@@ -1,7 +1,7 @@
-From b2c76541507c28fd93548c5639366d2149382b73 Mon Sep 17 00:00:00 2001
+From 78b745a4b05c920beaa66dfb140af134b5fc2425 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
 Date: Wed, 14 Jan 2015 08:20:48 +0100
-Subject: [PATCH 53/54] ARM: BCM5301X: Drop unused poll-interval from gpio-keys
+Subject: [PATCH] ARM: BCM5301X: Drop unused poll-interval from gpio-keys
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
index 211e8e6..d9a6607 100644 (file)
@@ -1,7 +1,7 @@
-From 766f8b55ba3f38dffc25a7dc0dd58502fd710f0a Mon Sep 17 00:00:00 2001
+From 8115a4e8d687427fbc1aa3774f50551563bf87f9 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
 Date: Wed, 14 Jan 2015 08:20:49 +0100
-Subject: [PATCH 54/54] ARM: BCM5301X: Add LEDs for Buffalo devices
+Subject: [PATCH] ARM: BCM5301X: Add LEDs for Buffalo devices
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
diff --git a/target/linux/bcm53xx/patches-3.14/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch b/target/linux/bcm53xx/patches-3.14/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch
new file mode 100644 (file)
index 0000000..70b3813
--- /dev/null
@@ -0,0 +1,73 @@
+From 5b1864b899d2b591402704dd0f6528c8661f1817 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 20 Jan 2015 22:42:16 +0100
+Subject: [PATCH] ARM: BCM5301X: Add DT for Buffalo WZR-900DHP
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/boot/dts/Makefile                        |  3 +-
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 37 +++++++++++++++++++++++
+ 2 files changed, 39 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index ff4a5ae..0de664e 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -56,7 +56,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+       bcm4708-netgear-r6250.dtb \
+       bcm4708-netgear-r6300-v2.dtb \
+       bcm47081-asus-rt-n18u.dtb \
+-      bcm47081-buffalo-wzr-600dhp2.dtb
++      bcm47081-buffalo-wzr-600dhp2.dtb \
++      bcm47081-buffalo-wzr-900dhp.dtb
+ dtb-$(CONFIG_ARCH_BERLIN) += \
+       berlin2-sony-nsz-gs7.dtb        \
+       berlin2cd-google-chromecast.dtb
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -0,0 +1,37 @@
++/*
++ * Broadcom BCM470X / BCM5301X ARM platform code.
++ * DTS for Buffalo WZR-900DHP
++ *
++ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++/dts-v1/;
++
++#include "bcm47081.dtsi"
++
++/ {
++      compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
++      model = "Buffalo WZR-900DHP (BCM47081)";
++
++      chosen {
++              bootargs = "console=ttyS0,115200";
++      };
++
++      memory {
++              reg = <0x00000000 0x08000000>;
++      };
++
++      gpio-keys {
++              compatible = "gpio-keys";
++              #address-cells = <1>;
++              #size-cells = <0>;
++
++              restart {
++                      label = "Reset";
++                      linux,code = <KEY_RESTART>;
++                      gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
++              };
++      };
++};
+-- 
+1.8.4.5
+
index 75dd2d1..8413e91 100644 (file)
@@ -15,7 +15,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 
 --- a/drivers/pci/probe.c
 +++ b/drivers/pci/probe.c
-@@ -1912,7 +1912,10 @@ struct pci_bus *pci_scan_root_bus(struct
+@@ -1915,7 +1915,10 @@ struct pci_bus *pci_scan_root_bus(struct
        if (!found)
                pci_bus_update_busn_res_end(b, max);
  
index 8bd99f9..51ea2be 100644 (file)
@@ -65,6 +65,17 @@ index bbb414f..20903a5 100644
 +              bootargs = "console=ttyS0,115200 earlyprintk";
        };
  
+       memory {
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -16,7 +16,7 @@
+       model = "Buffalo WZR-900DHP (BCM47081)";
+       chosen {
+-              bootargs = "console=ttyS0,115200";
++              bootargs = "console=ttyS0,115200 earlyprintk";
+       };
        memory {
 -- 
 1.8.4.5
index 13bec16..183b53f 100644 (file)
@@ -75,3 +75,15 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
        };
  
        spi {
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -20,7 +20,8 @@
+       };
+       memory {
+-              reg = <0x00000000 0x08000000>;
++              reg = <0x00000000 0x08000000
++                     0x88000000 0x08000000>;
+       };
+       gpio-keys {
diff --git a/target/linux/bcm53xx/patches-3.14/320-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch b/target/linux/bcm53xx/patches-3.14/320-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch
deleted file mode 100644 (file)
index b0d0540..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-From 840327b33202a791d4aae36c5deca56d283c209f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 7 Dec 2014 11:44:53 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Buffalo WZR-900DHP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/Makefile                        |  3 +-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 35 +++++++++++++++++++++++
- 2 files changed, 37 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -56,7 +56,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
-       bcm4708-netgear-r6250.dtb \
-       bcm4708-netgear-r6300-v2.dtb \
-       bcm47081-asus-rt-n18u.dtb \
--      bcm47081-buffalo-wzr-600dhp2.dtb
-+      bcm47081-buffalo-wzr-600dhp2.dtb \
-+      bcm47081-buffalo-wzr-900dhp.dtb
- dtb-$(CONFIG_ARCH_BERLIN) += \
-       berlin2-sony-nsz-gs7.dtb        \
-       berlin2cd-google-chromecast.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -0,0 +1,36 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Buffalo WZR-900DHP
-+ *
-+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47081.dtsi"
-+
-+/ {
-+      compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
-+      model = "Buffalo WZR-900DHP (BCM47081)";
-+
-+      chosen {
-+              bootargs = "console=ttyS0,115200 earlyprintk";
-+      };
-+
-+      memory {
-+              reg = <0x00000000 0x08000000
-+                     0x88000000 0x08000000>;
-+      };
-+
-+      chipcommonA {
-+              uart0: serial@0300 {
-+                      status = "okay";
-+              };
-+
-+              uart1: serial@0400 {
-+                      status = "okay";
-+              };
-+      };
-+};
index cc0e75f..35cbb69 100644 (file)
@@ -101,3 +101,17 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  
                restart {
                        label = "Reset";
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -25,9 +25,10 @@
+       };
+       gpio-keys {
+-              compatible = "gpio-keys";
++              compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
++              poll-interval = <200>;
+               restart {
+                       label = "Reset";
index ac8c77b..b5eecec 100644 (file)
@@ -109,3 +109,22 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
        axi@18000000 {
                nand@28000 {
                        reg = <0x00028000 0x1000>;
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -24,6 +24,16 @@
+                      0x88000000 0x08000000>;
+       };
++      chipcommonA {
++              uart0: serial@0300 {
++                      status = "okay";
++              };
++
++              uart1: serial@0400 {
++                      status = "okay";
++              };
++      };
++
+       gpio-keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
index c9cf71b..3e5e58d 100644 (file)
@@ -1,7 +1,7 @@
-From 0da909663566b34e0294ab0ff1ea08908164811e Mon Sep 17 00:00:00 2001
+From e27a09ae9369e10bc589ef4d720ecf4abcbcec50 Mon Sep 17 00:00:00 2001
 From: Dan Haab <dhaab@luxul.com>
-Date: Wed, 7 Jan 2015 14:34:50 -0700
-Subject: [PATCH 52/54] ARM: BCM5301X: Add DT for Luxul XWC-1000
+Date: Mon, 19 Jan 2015 12:45:37 -0700
+Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWC-1000
 
 Luxul XWC-1000 is a controller device based on BCM4708 SoC. The only
 unusual thing in its DTS file is "ubi" partition on NAND flash.
index 87e9153..177b360 100644 (file)
@@ -1,7 +1,7 @@
-From b2c76541507c28fd93548c5639366d2149382b73 Mon Sep 17 00:00:00 2001
+From 78b745a4b05c920beaa66dfb140af134b5fc2425 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
 Date: Wed, 14 Jan 2015 08:20:48 +0100
-Subject: [PATCH 53/54] ARM: BCM5301X: Drop unused poll-interval from gpio-keys
+Subject: [PATCH] ARM: BCM5301X: Drop unused poll-interval from gpio-keys
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
index 211e8e6..d9a6607 100644 (file)
@@ -1,7 +1,7 @@
-From 766f8b55ba3f38dffc25a7dc0dd58502fd710f0a Mon Sep 17 00:00:00 2001
+From 8115a4e8d687427fbc1aa3774f50551563bf87f9 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
 Date: Wed, 14 Jan 2015 08:20:49 +0100
-Subject: [PATCH 54/54] ARM: BCM5301X: Add LEDs for Buffalo devices
+Subject: [PATCH] ARM: BCM5301X: Add LEDs for Buffalo devices
 MIME-Version: 1.0
 Content-Type: text/plain; charset=UTF-8
 Content-Transfer-Encoding: 8bit
diff --git a/target/linux/bcm53xx/patches-3.18/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch b/target/linux/bcm53xx/patches-3.18/055-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch
new file mode 100644 (file)
index 0000000..38e76f1
--- /dev/null
@@ -0,0 +1,76 @@
+From 5b1864b899d2b591402704dd0f6528c8661f1817 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 20 Jan 2015 22:42:16 +0100
+Subject: [PATCH] ARM: BCM5301X: Add DT for Buffalo WZR-900DHP
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/boot/dts/Makefile                        |  3 +-
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 37 +++++++++++++++++++++++
+ 2 files changed, 39 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index ff4a5ae..0de664e 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -60,7 +60,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+       bcm4708-netgear-r6250.dtb \
+       bcm4708-netgear-r6300-v2.dtb \
+       bcm47081-asus-rt-n18u.dtb \
+-      bcm47081-buffalo-wzr-600dhp2.dtb
++      bcm47081-buffalo-wzr-600dhp2.dtb \
++      bcm47081-buffalo-wzr-900dhp.dtb
+ dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
+ dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
+       bcm21664-garnet.dtb
+diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+new file mode 100644
+index 0000000..7d6868a
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -0,0 +1,37 @@
++/*
++ * Broadcom BCM470X / BCM5301X ARM platform code.
++ * DTS for Buffalo WZR-900DHP
++ *
++ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++/dts-v1/;
++
++#include "bcm47081.dtsi"
++
++/ {
++      compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
++      model = "Buffalo WZR-900DHP (BCM47081)";
++
++      chosen {
++              bootargs = "console=ttyS0,115200";
++      };
++
++      memory {
++              reg = <0x00000000 0x08000000>;
++      };
++
++      gpio-keys {
++              compatible = "gpio-keys";
++              #address-cells = <1>;
++              #size-cells = <0>;
++
++              restart {
++                      label = "Reset";
++                      linux,code = <KEY_RESTART>;
++                      gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
++              };
++      };
++};
+-- 
+1.8.4.5
+
index 8bd99f9..51ea2be 100644 (file)
@@ -65,6 +65,17 @@ index bbb414f..20903a5 100644
 +              bootargs = "console=ttyS0,115200 earlyprintk";
        };
  
+       memory {
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -16,7 +16,7 @@
+       model = "Buffalo WZR-900DHP (BCM47081)";
+       chosen {
+-              bootargs = "console=ttyS0,115200";
++              bootargs = "console=ttyS0,115200 earlyprintk";
+       };
        memory {
 -- 
 1.8.4.5
index 13bec16..183b53f 100644 (file)
@@ -75,3 +75,15 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
        };
  
        spi {
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -20,7 +20,8 @@
+       };
+       memory {
+-              reg = <0x00000000 0x08000000>;
++              reg = <0x00000000 0x08000000
++                     0x88000000 0x08000000>;
+       };
+       gpio-keys {
diff --git a/target/linux/bcm53xx/patches-3.18/320-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch b/target/linux/bcm53xx/patches-3.18/320-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch
deleted file mode 100644 (file)
index 4fb9cbb..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-From 840327b33202a791d4aae36c5deca56d283c209f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 7 Dec 2014 11:44:53 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for Buffalo WZR-900DHP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- arch/arm/boot/dts/Makefile                        |  3 +-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 35 +++++++++++++++++++++++
- 2 files changed, 37 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -60,7 +60,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
-       bcm4708-netgear-r6250.dtb \
-       bcm4708-netgear-r6300-v2.dtb \
-       bcm47081-asus-rt-n18u.dtb \
--      bcm47081-buffalo-wzr-600dhp2.dtb
-+      bcm47081-buffalo-wzr-600dhp2.dtb \
-+      bcm47081-buffalo-wzr-900dhp.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
- dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
-       bcm21664-garnet.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -0,0 +1,36 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Buffalo WZR-900DHP
-+ *
-+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47081.dtsi"
-+
-+/ {
-+      compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
-+      model = "Buffalo WZR-900DHP (BCM47081)";
-+
-+      chosen {
-+              bootargs = "console=ttyS0,115200 earlyprintk";
-+      };
-+
-+      memory {
-+              reg = <0x00000000 0x08000000
-+                     0x88000000 0x08000000>;
-+      };
-+
-+      chipcommonA {
-+              uart0: serial@0300 {
-+                      status = "okay";
-+              };
-+
-+              uart1: serial@0400 {
-+                      status = "okay";
-+              };
-+      };
-+};
index cc0e75f..35cbb69 100644 (file)
@@ -101,3 +101,17 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  
                restart {
                        label = "Reset";
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -25,9 +25,10 @@
+       };
+       gpio-keys {
+-              compatible = "gpio-keys";
++              compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
++              poll-interval = <200>;
+               restart {
+                       label = "Reset";
index a5ed5d2..b088c9b 100644 (file)
@@ -109,3 +109,22 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
        axi@18000000 {
                nand@28000 {
                        reg = <0x00028000 0x1000>;
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -24,6 +24,16 @@
+                      0x88000000 0x08000000>;
+       };
++      chipcommonA {
++              uart0: serial@0300 {
++                      status = "okay";
++              };
++
++              uart1: serial@0400 {
++                      status = "okay";
++              };
++      };
++
+       gpio-keys {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;