ixp4xx: clean up patches, fold the 2.6.37 update patch into the relevant board suppor...
authorFelix Fietkau <nbd@openwrt.org>
Sat, 26 Feb 2011 06:23:32 +0000 (06:23 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Sat, 26 Feb 2011 06:23:32 +0000 (06:23 +0000)
SVN-Revision: 25727

16 files changed:
target/linux/ixp4xx/patches-2.6.37/105-wg302v1_support.patch
target/linux/ixp4xx/patches-2.6.37/110-pronghorn_series_support.patch
target/linux/ixp4xx/patches-2.6.37/115-sidewinder_support.patch
target/linux/ixp4xx/patches-2.6.37/120-compex_support.patch
target/linux/ixp4xx/patches-2.6.37/130-wrt300nv2_support.patch
target/linux/ixp4xx/patches-2.6.37/150-lanready_ap1000_support.patch
target/linux/ixp4xx/patches-2.6.37/162-wg302v1_mem_fixup.patch
target/linux/ixp4xx/patches-2.6.37/180-tw5334_support.patch
target/linux/ixp4xx/patches-2.6.37/185-mi424wr_support.patch
target/linux/ixp4xx/patches-2.6.37/190-cambria_support.patch
target/linux/ixp4xx/patches-2.6.37/191-cambria_optional_uart.patch
target/linux/ixp4xx/patches-2.6.37/193-cambria_pld_gpio.patch
target/linux/ixp4xx/patches-2.6.37/295-latch_led_driver.patch
target/linux/ixp4xx/patches-2.6.37/500-usr8200_support.patch
target/linux/ixp4xx/patches-2.6.37/520-tw2662_support.patch
target/linux/ixp4xx/patches-2.6.37/601_arm_2.6.37_update.patch [deleted file]

index 6e12caa..4d2e4a1 100644 (file)
 +subsys_initcall(wg302v1_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -0,0 +1,142 @@
+@@ -0,0 +1,140 @@
 +/*
 + * arch/arm/mach-ixp4xx/wg302v1-setup.c
 + *
 +#ifdef CONFIG_MACH_WG302V1
 +MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
 +      /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
-+      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +      .map_io         = ixp4xx_map_io,
 +      .init_irq       = ixp4xx_init_irq,
 +      .timer          = &ixp4xx_timer,
index f3e088b..805dedc 100644 (file)
@@ -19,7 +19,7 @@
 +      bool "ADI Pronghorn series"
 +      select PCI
 +      help
-+        Say 'Y' here if you want your kernel to support the ADI 
++        Say 'Y' here if you want your kernel to support the ADI
 +        Engineering Pronghorn series. For more
 +        information on this platform, see http://www.adiengineering.com
 +
 +subsys_initcall(pronghorn_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
-@@ -0,0 +1,245 @@
+@@ -0,0 +1,241 @@
 +/*
 + * arch/arm/mach-ixp4xx/pronghorn-setup.c
 + *
 +
 +MACHINE_START(PRONGHORN, "ADI Engineering Pronghorn")
 +      /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
-+      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +      .map_io         = ixp4xx_map_io,
 +      .init_irq       = ixp4xx_init_irq,
 +      .timer          = &ixp4xx_timer,
 +
 +MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
 +      /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
-+      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +      .map_io         = ixp4xx_map_io,
 +      .init_irq       = ixp4xx_init_irq,
 +      .timer          = &ixp4xx_timer,
index 2ec3d95..6ccedd5 100644 (file)
@@ -130,7 +130,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
 +subsys_initcall(sidewinder_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c
-@@ -0,0 +1,149 @@
+@@ -0,0 +1,147 @@
 +/*
 + * arch/arm/mach-ixp4xx/sidewinder-setup.c
 + *
@@ -272,8 +272,6 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
 +
 +MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
 +      /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
-+      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +      .map_io         = ixp4xx_map_io,
 +      .init_irq       = ixp4xx_init_irq,
 +      .timer          = &ixp4xx_timer,
index c549314..b11ffd9 100644 (file)
@@ -50,7 +50,7 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
  obj-$(CONFIG_IXP4XX_QMGR)     += ixp4xx_qmgr.o
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -0,0 +1,136 @@
+@@ -0,0 +1,134 @@
 +/*
 + * arch/arm/mach-ixp4xx/compex-setup.c
 + *
@@ -179,8 +179,6 @@ Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
 +
 +MACHINE_START(COMPEX, "Compex WP18 / NP18A")
 +      /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
-+      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +      .map_io         = ixp4xx_map_io,
 +      .init_irq       = ixp4xx_init_irq,
 +      .timer          = &ixp4xx_timer,
index 865bb9d..4e84e7a 100644 (file)
 +subsys_initcall(wrt300nv2_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -0,0 +1,108 @@
+@@ -0,0 +1,106 @@
 +/*
 + * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
 + *
 +#ifdef CONFIG_MACH_WRT300NV2
 +MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
 +      /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
-+      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +      .map_io         = ixp4xx_map_io,
 +      .init_irq       = ixp4xx_init_irq,
 +      .timer          = &ixp4xx_timer,
index 16f19ba..8b7c98e 100644 (file)
@@ -1,6 +1,6 @@
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -0,0 +1,151 @@
+@@ -0,0 +1,149 @@
 +/*
 + * arch/arm/mach-ixp4xx/ap1000-setup.c
 + *
 +#ifdef CONFIG_MACH_AP1000
 +MACHINE_START(AP1000, "Lanready AP-1000")
 +      /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
-+      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +      .fixup          = ap1000_fixup,
 +      .map_io         = ixp4xx_map_io,
 +      .init_irq       = ixp4xx_init_irq,
index 684db44..e84ce9b 100644 (file)
  static void __init wg302v1_init(void)
  {
        ixp4xx_sys_init();
-@@ -133,6 +163,7 @@ MACHINE_START(WG302V1, "Netgear WG302 v1
+@@ -131,6 +161,7 @@ static void __init wg302v1_init(void)
+ #ifdef CONFIG_MACH_WG302V1
+ MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
        /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-       .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
-       .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +      .fixup          = wg302v1_fixup,
        .map_io         = ixp4xx_map_io,
        .init_irq       = ixp4xx_init_irq,
index e92d461..d609cd7 100644 (file)
@@ -35,7 +35,7 @@
  obj-$(CONFIG_IXP4XX_QMGR)     += ixp4xx_qmgr.o
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/tw5334-setup.c
-@@ -0,0 +1,163 @@
+@@ -0,0 +1,161 @@
 +/*
 + * arch/arm/mach-ixp4xx/tw5334-setup.c
 + *
 +#ifdef CONFIG_MACH_TW5334
 +MACHINE_START(TW5334, "Titan Wireless TW-533-4")
 +      /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
-+      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +      .map_io         = ixp4xx_map_io,
 +      .init_irq       = ixp4xx_init_irq,
 +      .timer          = &ixp4xx_timer,
index d85d3d1..85c3e64 100644 (file)
@@ -74,7 +74,7 @@
 +
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c
-@@ -0,0 +1,344 @@
+@@ -0,0 +1,342 @@
 +/*
 + * arch/arm/mach-ixp4xx/mi424wr-setup.c
 + *
 +
 +MACHINE_START(MI424WR, "Actiontec MI424WR")
 +      /* Maintainer: Jose Vasconcellos */
-+      .phys_io        = IXP4XX_UART2_BASE_PHYS,
-+      .io_pg_offst    = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc,
 +      .map_io         = ixp4xx_map_io,
 +      .init_irq       = ixp4xx_init_irq,
 +      .timer          = &ixp4xx_timer,
index 683d8be..32199d8 100644 (file)
@@ -77,7 +77,7 @@
 +subsys_initcall(cambria_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -0,0 +1,429 @@
+@@ -0,0 +1,427 @@
 +/*
 + * arch/arm/mach-ixp4xx/cambria-setup.c
 + *
 +
 +MACHINE_START(CAMBRIA, "Gateworks Cambria series")
 +      /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
-+      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +      .map_io         = ixp4xx_map_io,
 +      .init_irq       = ixp4xx_init_irq,
 +      .timer          = &ixp4xx_timer,
index 099980b..603cf3c 100644 (file)
        unsigned int            custom_divisor;
 --- a/drivers/serial/8250.c
 +++ b/drivers/serial/8250.c
-@@ -412,6 +412,20 @@ static void mem_serial_out(struct uart_p
+@@ -413,6 +413,20 @@ static void mem_serial_out(struct uart_p
        writeb(value, p->membase + offset);
  }
  
  static void mem32_serial_out(struct uart_port *p, int offset, int value)
  {
        offset = map_8250_out_reg(p, offset) << p->regshift;
-@@ -503,6 +517,11 @@ static void set_io_from_upio(struct uart
+@@ -504,6 +518,11 @@ static void set_io_from_upio(struct uart
                p->serial_out = mem32_serial_out;
                break;
  
        case UPIO_AU:
                p->serial_in = au_serial_in;
                p->serial_out = au_serial_out;
-@@ -534,6 +553,7 @@ serial_out_sync(struct uart_8250_port *u
+@@ -535,6 +554,7 @@ serial_out_sync(struct uart_8250_port *u
        switch (p->iotype) {
        case UPIO_MEM:
        case UPIO_MEM32:
        case UPIO_AU:
        case UPIO_DWAPB:
                p->serial_out(p, offset, value);
-@@ -2476,6 +2496,7 @@ static int serial8250_request_std_resour
+@@ -2477,6 +2497,7 @@ static int serial8250_request_std_resour
        case UPIO_MEM32:
        case UPIO_MEM:
        case UPIO_DWAPB:
                if (!up->port.mapbase)
                        break;
  
-@@ -2513,6 +2534,7 @@ static void serial8250_release_std_resou
+@@ -2514,6 +2535,7 @@ static void serial8250_release_std_resou
        case UPIO_MEM32:
        case UPIO_MEM:
        case UPIO_DWAPB:
                if (!up->port.mapbase)
                        break;
  
-@@ -3024,6 +3046,7 @@ static int __devinit serial8250_probe(st
+@@ -3025,6 +3047,7 @@ static int __devinit serial8250_probe(st
                port.set_termios        = p->set_termios;
                port.pm                 = p->pm;
                port.dev                = &dev->dev;
                port.irqflags           |= irqflag;
                ret = serial8250_register_port(&port);
                if (ret < 0) {
-@@ -3173,6 +3196,7 @@ int serial8250_register_port(struct uart
+@@ -3174,6 +3197,7 @@ int serial8250_register_port(struct uart
                uart->port.iotype       = port->iotype;
                uart->port.flags        = port->flags | UPF_BOOT_AUTOCONF;
                uart->port.mapbase      = port->mapbase;
                        uart->port.dev = port->dev;
 --- a/drivers/serial/serial_core.c
 +++ b/drivers/serial/serial_core.c
-@@ -2130,6 +2130,7 @@ uart_report_port(struct uart_driver *drv
+@@ -2129,6 +2129,7 @@ uart_report_port(struct uart_driver *drv
                snprintf(address, sizeof(address),
                         "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
                break;
        case UPIO_MEM:
        case UPIO_MEM32:
        case UPIO_AU:
-@@ -2550,6 +2551,7 @@ int uart_match_port(struct uart_port *po
+@@ -2549,6 +2550,7 @@ int uart_match_port(struct uart_port *po
        case UPIO_HUB6:
                return (port1->iobase == port2->iobase) &&
                       (port1->hub6   == port2->hub6);
index 171898d..299630f 100644 (file)
@@ -90,7 +90,7 @@
  }
  
  static struct cambria_board_info cambria_boards[] __initdata = {
-@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata
+@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata 
                I2C_BOARD_INFO("24c08", 0x51),
                .platform_data  = &cambria_eeprom_info
        },
index 1dc2690..4d399f7 100644 (file)
@@ -1,8 +1,8 @@
 --- a/drivers/leds/Kconfig
 +++ b/drivers/leds/Kconfig
-@@ -176,6 +176,13 @@ config LEDS_LP3944
-         To compile this driver as a module, choose M here: the
-         module will be called leds-lp3944.
+@@ -210,6 +210,13 @@ config LEDS_LP5523
+         Driver provides direct control via LED class and interface for
+         programming the engines.
  
 +config LEDS_LATCH
 +      tristate "LED Support for Memory Latched LEDs"
@@ -13,7 +13,7 @@
 +
  config LEDS_CLEVO_MAIL
        tristate "Mail LED on Clevo notebook"
-       depends on X86 && SERIO_I8042 && DMI
+       depends on LEDS_CLASS
 --- /dev/null
 +++ b/drivers/leds/leds-latch.c
 @@ -0,0 +1,150 @@
  obj-$(CONFIG_LEDS_GPIO)                       += leds-gpio.o
 +obj-$(CONFIG_LEDS_LATCH)              += leds-latch.o
  obj-$(CONFIG_LEDS_LP3944)             += leds-lp3944.o
- obj-$(CONFIG_LEDS_CLEVO_MAIL)         += leds-clevo-mail.o
- obj-$(CONFIG_LEDS_HP6XX)              += leds-hp6xx.o
+ obj-$(CONFIG_LEDS_LP5521)             += leds-lp5521.o
+ obj-$(CONFIG_LEDS_LP5523)             += leds-lp5523.o
 --- a/include/linux/leds.h
 +++ b/include/linux/leds.h
-@@ -165,5 +165,19 @@ struct gpio_led_platform_data {
+@@ -204,5 +204,19 @@ struct gpio_led_platform_data {
                                        unsigned long *delay_off);
  };
  
index e757ff3..3c32295 100644 (file)
 +subsys_initcall(usr8200_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
-@@ -0,0 +1,212 @@
+@@ -0,0 +1,210 @@
 +/*
 + * arch/arm/mach-ixp4xx/usr8200-setup.c
 + *
 +
 +MACHINE_START(USR8200, "USRobotics USR8200")
 +      /* Maintainer: Peter Denison <openwrt@marshadder.org> */
-+      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
-+      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +      .map_io         = ixp4xx_map_io,
 +      .init_irq       = ixp4xx_init_irq,
 +      .timer          = &ixp4xx_timer,
index 3fde579..8b50b90 100644 (file)
 +subsys_initcall(tw2662_pci_init);
 --- /dev/null
 +++ b/arch/arm/mach-ixp4xx/tw2662-setup.c
-@@ -0,0 +1,212 @@
+@@ -0,0 +1,210 @@
 +/*
 + * arch/arm/mach-ixp4xx/tw2662-setup.c
 + *
 +#ifdef CONFIG_MACH_TW2662
 +MACHINE_START(TW2662, "Titan Wireless TW-266-2")
 +      /* Maintainer: Alexandros C. Couloumbis <alex@ozo.com> */
-+      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
-+      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +      .fixup          = tw2662_fixup,
 +      .map_io         = ixp4xx_map_io,
 +      .init_irq       = ixp4xx_init_irq,
diff --git a/target/linux/ixp4xx/patches-2.6.37/601_arm_2.6.37_update.patch b/target/linux/ixp4xx/patches-2.6.37/601_arm_2.6.37_update.patch
deleted file mode 100644 (file)
index 76b6a3e..0000000
+++ /dev/null
@@ -1,130 +0,0 @@
---- a/arch/arm/mach-ixp4xx/ap1000-setup.c
-+++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -167,8 +167,6 @@ static void __init ap1000_init(void)
- #ifdef CONFIG_MACH_AP1000
- MACHINE_START(AP1000, "Lanready AP-1000")
-       /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
--      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
--      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-       .fixup          = ap1000_fixup,
-       .map_io         = ixp4xx_map_io,
-       .init_irq       = ixp4xx_init_irq,
---- a/arch/arm/mach-ixp4xx/cambria-setup.c
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -563,8 +563,6 @@ late_initcall(cambria_model_setup);
- MACHINE_START(CAMBRIA, "Gateworks Cambria series")
-       /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
--      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
--      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-       .map_io         = ixp4xx_map_io,
-       .init_irq       = ixp4xx_init_irq,
-       .timer          = &ixp4xx_timer,
---- a/arch/arm/mach-ixp4xx/compex-setup.c
-+++ b/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -126,8 +126,6 @@ static void __init compex_init(void)
- MACHINE_START(COMPEX, "Compex WP18 / NP18A")
-       /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
--      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
--      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-       .map_io         = ixp4xx_map_io,
-       .init_irq       = ixp4xx_init_irq,
-       .timer          = &ixp4xx_timer,
---- a/arch/arm/mach-ixp4xx/mi424wr-setup.c
-+++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c
-@@ -333,8 +333,6 @@ static void __init mi424wr_init(void)
- MACHINE_START(MI424WR, "Actiontec MI424WR")
-       /* Maintainer: Jose Vasconcellos */
--      .phys_io        = IXP4XX_UART2_BASE_PHYS,
--      .io_pg_offst    = ((IXP4XX_UART2_BASE_VIRT) >> 18) & 0xfffc,
-       .map_io         = ixp4xx_map_io,
-       .init_irq       = ixp4xx_init_irq,
-       .timer          = &ixp4xx_timer,
---- a/arch/arm/mach-ixp4xx/pronghorn-setup.c
-+++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
-@@ -224,8 +224,6 @@ static void __init pronghorn_init(void)
- MACHINE_START(PRONGHORN, "ADI Engineering Pronghorn")
-       /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
--      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
--      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-       .map_io         = ixp4xx_map_io,
-       .init_irq       = ixp4xx_init_irq,
-       .timer          = &ixp4xx_timer,
-@@ -235,8 +233,6 @@ MACHINE_END
- MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
-       /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
--      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
--      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-       .map_io         = ixp4xx_map_io,
-       .init_irq       = ixp4xx_init_irq,
-       .timer          = &ixp4xx_timer,
---- a/arch/arm/mach-ixp4xx/sidewinder-setup.c
-+++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c
-@@ -139,8 +139,6 @@ static void __init sidewinder_init(void)
- MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
-       /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
--      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
--      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-       .map_io         = ixp4xx_map_io,
-       .init_irq       = ixp4xx_init_irq,
-       .timer          = &ixp4xx_timer,
---- a/arch/arm/mach-ixp4xx/tw2662-setup.c
-+++ b/arch/arm/mach-ixp4xx/tw2662-setup.c
-@@ -200,8 +200,6 @@ static void __init tw2662_init(void)
- #ifdef CONFIG_MACH_TW2662
- MACHINE_START(TW2662, "Titan Wireless TW-266-2")
-       /* Maintainer: Alexandros C. Couloumbis <alex@ozo.com> */
--      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
--      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-       .fixup          = tw2662_fixup,
-       .map_io         = ixp4xx_map_io,
-       .init_irq       = ixp4xx_init_irq,
---- a/arch/arm/mach-ixp4xx/tw5334-setup.c
-+++ b/arch/arm/mach-ixp4xx/tw5334-setup.c
-@@ -152,8 +152,6 @@ static void __init tw5334_init(void)
- #ifdef CONFIG_MACH_TW5334
- MACHINE_START(TW5334, "Titan Wireless TW-533-4")
-       /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
--      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
--      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-       .map_io         = ixp4xx_map_io,
-       .init_irq       = ixp4xx_init_irq,
-       .timer          = &ixp4xx_timer,
---- a/arch/arm/mach-ixp4xx/usr8200-setup.c
-+++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
-@@ -202,8 +202,6 @@ static void __init usr8200_init(void)
- MACHINE_START(USR8200, "USRobotics USR8200")
-       /* Maintainer: Peter Denison <openwrt@marshadder.org> */
--      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
--      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-       .map_io         = ixp4xx_map_io,
-       .init_irq       = ixp4xx_init_irq,
-       .timer          = &ixp4xx_timer,
---- a/arch/arm/mach-ixp4xx/wg302v1-setup.c
-+++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -161,8 +161,6 @@ static void __init wg302v1_init(void)
- #ifdef CONFIG_MACH_WG302V1
- MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
-       /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
--      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
--      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-       .fixup          = wg302v1_fixup,
-       .map_io         = ixp4xx_map_io,
-       .init_irq       = ixp4xx_init_irq,
---- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -157,8 +157,6 @@ static void __init wrt300nv2_init(void)
- #ifdef CONFIG_MACH_WRT300NV2
- MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
-       /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
--      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
--      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-       .map_io         = ixp4xx_map_io,
-       .init_irq       = ixp4xx_init_irq,
-       .timer          = &ixp4xx_timer,