+
--- /dev/null
+++ b/arch/mips/pci/ifxmips_pcie.c
-@@ -0,0 +1,1092 @@
+@@ -0,0 +1,1091 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
-+MODULE_SUPPORTED_DEVICE("Infineon builtin PCIe RC module");
+MODULE_DESCRIPTION("Infineon builtin PCIe RC driver");
+
--- /dev/null
+#endif /* IFXMIPS_PCIE_AR10_H */
--- /dev/null
+++ b/arch/mips/pci/ifxmips_pcie_msi.c
-@@ -0,0 +1,392 @@
+@@ -0,0 +1,391 @@
+/******************************************************************************
+**
+** FILE NAME : ifxmips_pcie_msi.c
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Chuanhua.Lei@infineon.com");
-+MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module");
+MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver");
+
--- /dev/null
+
--- a/arch/mips/pci/pci-legacy.c
+++ b/arch/mips/pci/pci-legacy.c
-@@ -313,3 +313,30 @@ char *__init pcibios_setup(char *str)
+@@ -305,3 +305,30 @@ char *__init pcibios_setup(char *str)
return pcibios_plat_setup(str);
return str;
}
(transaction layer end-to-end CRC checking).
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
-@@ -1420,6 +1420,8 @@ void pci_walk_bus(struct pci_bus *top, i
+@@ -1480,6 +1480,8 @@ void pci_walk_bus(struct pci_bus *top, i
void *userdata);
int pci_cfg_space_size(struct pci_dev *dev);
unsigned char pci_bus_max_busnr(struct pci_bus *bus);
unsigned long type);
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
-@@ -1079,6 +1079,12 @@
+@@ -1085,6 +1085,12 @@
#define PCI_DEVICE_ID_SGI_IOC3 0x0003
#define PCI_DEVICE_ID_SGI_LITHIUM 0x1002
+
--- a/arch/mips/lantiq/irq.c
+++ b/arch/mips/lantiq/irq.c
-@@ -12,6 +12,7 @@
+@@ -13,6 +13,7 @@
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <asm/bootinfo.h>
#include <asm/irq_cpu.h>
-@@ -91,6 +92,7 @@ void ltq_disable_irq(struct irq_data *d)
+@@ -92,6 +93,7 @@ void ltq_disable_irq(struct irq_data *d)
}
raw_spin_unlock_irqrestore(<q_icu_lock, flags);
}
{
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
-@@ -61,6 +61,10 @@ void (*_dma_cache_wback_inv)(unsigned lo
+@@ -63,6 +63,10 @@ void (*_dma_cache_wback_inv)(unsigned lo
void (*_dma_cache_wback)(unsigned long start, unsigned long size);
void (*_dma_cache_inv)(unsigned long start, unsigned long size);
obj-y += vmmc.o
--- /dev/null
+++ b/arch/mips/lantiq/xway/timer.c
-@@ -0,0 +1,846 @@
+@@ -0,0 +1,852 @@
+#ifndef CONFIG_SOC_AMAZON_SE
+
+#include <linux/kernel.h>
+
+ if (!access_ok((void __user *)arg, sizeof(struct gptu_ioctl_param)))
+ return -EFAULT;
-+ copy_from_user(¶m, (void __user *)arg, sizeof(param));
++ if (copy_from_user(¶m, (void __user *)arg, sizeof(param)))
++ return -EFAULT;
+
+ if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER
+ || GPTU_SET_COUNTER) && param.timer < 2)
+ (unsigned long) param.pid,
+ (unsigned long) param.sig);
+ if (ret > 0) {
-+ copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+ timer, &ret, sizeof(&ret));
-+ ret = 0;
++ if (copy_to_user(&((struct gptu_ioctl_param *) arg)->
++ timer, &ret, sizeof(&ret)))
++ ret = -EFAULT;
++ else
++ ret = 0;
+ }
+ break;
+ case GPTU_FREE_TIMER:
+ break;
+ case GPTU_GET_COUNT_VALUE:
+ ret = lq_get_count_value(param.timer, ¶m.value);
-+ if (!ret)
-+ copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+ value, ¶m.value,
-+ sizeof(param.value));
++ if (!ret && copy_to_user(&((struct gptu_ioctl_param *) arg)->
++ value, ¶m.value,sizeof(param.value)))
++ ret = -EFAULT;
+ break;
+ case GPTU_CALCULATE_DIVIDER:
+ param.value = lq_cal_divider(param.value);
+ if (param.value == 0)
+ ret = -EINVAL;
-+ else {
-+ copy_to_user(&((struct gptu_ioctl_param *) arg)->
++ else if (copy_to_user(&((struct gptu_ioctl_param *) arg)->
+ value, ¶m.value,
-+ sizeof(param.value));
++ sizeof(param.value)))
++ ret = -EFAULT;
++ else
+ ret = 0;
-+ }
+ break;
+ case GPTU_SET_TIMER:
+ ret = lq_set_timer(param.timer, param.value,
+ (unsigned long) param.pid,
+ (unsigned long) param.sig);
+ if (ret > 0) {
-+ copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+ timer, &ret, sizeof(&ret));
-+ ret = 0;
++ if (copy_to_user(&((struct gptu_ioctl_param *) arg)->
++ timer, &ret, sizeof(&ret)))
++ ret = -EFAULT;
++ else
++ ret = 0;
+ }
+ break;
+ case GPTU_SET_COUNTER:
+ lq_set_counter(param.timer, param.flag, param.value, 0, 0);
+ if (ret > 0) {
-+ copy_to_user(&((struct gptu_ioctl_param *) arg)->
-+ timer, &ret, sizeof(&ret));
-+ ret = 0;
++ if (copy_to_user(&((struct gptu_ioctl_param *) arg)->
++ timer, &ret, sizeof(&ret)))
++ ret = -EFAULT;
++ else
++ ret = 0;
+ }
+ break;
+ default:
--- a/drivers/net/phy/intel-xway.c
+++ b/drivers/net/phy/intel-xway.c
-@@ -157,6 +157,51 @@
- #define PHY_ID_PHY11G_VR9_1_2 0xD565A409
- #define PHY_ID_PHY22F_VR9_1_2 0xD565A419
+@@ -229,6 +229,51 @@ static int xway_gphy_rgmii_init(struct p
+ XWAY_MDIO_MIICTRL_TXSKEW_MASK, val);
+ }
+#if IS_ENABLED(CONFIG_OF_MDIO)
+static int vr9_gphy_of_reg_init(struct phy_device *phydev)
static int xway_gphy_config_init(struct phy_device *phydev)
{
int err;
-@@ -204,6 +249,7 @@ static int xway_gphy_config_init(struct
- phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2H, ledxh);
- phy_write_mmd(phydev, MDIO_MMD_VEND2, XWAY_MMD_LED2L, ledxl);
+@@ -280,6 +325,7 @@ static int xway_gphy_config_init(struct
+ if (err)
+ return err;
+ vr9_gphy_of_reg_init(phydev);
return 0;
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -753,6 +753,16 @@ config I2C_MESON
+@@ -757,6 +757,16 @@ config I2C_MESON
If you say yes to this option, support will be included for the
I2C interface on the Amlogic Meson family of SoCs.
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
-@@ -92,7 +92,14 @@ static void dwc2_set_rk_params(struct dw
+@@ -93,7 +93,14 @@ static void dwc2_set_rk_params(struct dw
p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
}
{
struct dwc2_core_params *p = &hsotg->params;
-@@ -100,12 +107,20 @@ static void dwc2_set_ltq_params(struct d
+@@ -101,12 +108,20 @@ static void dwc2_set_ltq_params(struct d
p->host_rx_fifo_size = 288;
p->host_nperio_tx_fifo_size = 128;
p->host_perio_tx_fifo_size = 96;
static void dwc2_set_amlogic_params(struct dwc2_hsotg *hsotg)
{
struct dwc2_core_params *p = &hsotg->params;
-@@ -196,8 +211,11 @@ const struct of_device_id dwc2_of_match_
+@@ -205,8 +220,11 @@ const struct of_device_id dwc2_of_match_
{ .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
{ .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params },
{ .compatible = "rockchip,rk3066-usb", .data = dwc2_set_rk_params },
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -2434,6 +2434,12 @@ config MIPS_VPE_LOADER
+@@ -2429,6 +2429,12 @@ config MIPS_VPE_LOADER
Includes a loader for loading an elf relocatable object
onto another VPE and running it.
default "y"
--- a/arch/mips/include/asm/vpe.h
+++ b/arch/mips/include/asm/vpe.h
-@@ -127,4 +127,13 @@ void cleanup_tc(struct tc *tc);
+@@ -124,4 +124,13 @@ void cleanup_tc(struct tc *tc);
int __init vpe_module_init(void);
void __exit vpe_module_exit(void);
#endif
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
-@@ -181,7 +181,7 @@ ltq_dma_free(struct ltq_dma_channel *ch)
+@@ -182,7 +182,7 @@ ltq_dma_free(struct ltq_dma_channel *ch)
EXPORT_SYMBOL_GPL(ltq_dma_free);
void
{
ltq_dma_w32(p, LTQ_DMA_PS);
switch (p) {
-@@ -190,16 +190,44 @@ ltq_dma_init_port(int p)
+@@ -191,16 +191,44 @@ ltq_dma_init_port(int p)
* Tell the DMA engine to swap the endianness of data frames and
* drop packets if the channel arbitration fails.
*/
const char *get_system_type(void)
{
return soc_info.sys_type;
-@@ -100,6 +108,17 @@ void __init device_tree_init(void)
+@@ -93,6 +101,17 @@ void __init device_tree_init(void)
unflatten_and_copy_device_tree();
}
void __init prom_init(void)
{
/* call the soc specific detetcion code and get it to fill soc_info */
-@@ -111,7 +130,10 @@ void __init prom_init(void)
+@@ -104,7 +123,10 @@ void __init prom_init(void)
prom_init_cmdline();
#if defined(CONFIG_MIPS_MT_SMP)
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
-@@ -454,7 +504,7 @@ static int xrx200_probe(struct platform_
+@@ -453,7 +503,7 @@ static int xrx200_probe(struct platform_
net_dev->netdev_ops = &xrx200_netdev_ops;
SET_NETDEV_DEV(net_dev, dev);
net_dev->min_mtu = ETH_ZLEN;
+ net_dev->max_mtu = XRX200_DMA_DATA_LEN - VLAN_ETH_HLEN - ETH_FCS_LEN;
/* load the memory ranges */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->pmac_reg = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
break;
}
dev_kfree_skb_any(skb);
-@@ -504,7 +517,8 @@ static int xrx200_probe(struct platform_
+@@ -503,7 +516,8 @@ static int xrx200_probe(struct platform_
net_dev->netdev_ops = &xrx200_netdev_ops;
SET_NETDEV_DEV(net_dev, dev);
net_dev->min_mtu = ETH_ZLEN;
+ priv->rx_buf_size = xrx200_buffer_size(ETH_DATA_LEN);
/* load the memory ranges */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->pmac_reg = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
+++ /dev/null
-From a09d042b086202735c4ed64573cdd79933020001 Mon Sep 17 00:00:00 2001
-From: Aleksander Jan Bajkowski <olek2@wp.pl>
-Date: Mon, 22 Mar 2021 21:37:15 +0100
-Subject: [PATCH] net: dsa: lantiq: allow to use all GPHYs on xRX300 and xRX330
-
-This patch allows to use all PHYs on GRX300 and GRX330. The ARX300
-has 3 and the GRX330 has 4 integrated PHYs connected to different
-ports compared to VRX200. Each integrated PHY can work as single
-Gigabit Ethernet PHY (GMII) or as double Fast Ethernet PHY (MII).
-
-Allowed port configurations:
-
-xRX200:
-GMAC0: RGMII, MII, REVMII or RMII port
-GMAC1: RGMII, MII, REVMII or RMII port
-GMAC2: GPHY0 (GMII)
-GMAC3: GPHY0 (MII)
-GMAC4: GPHY1 (GMII)
-GMAC5: GPHY1 (MII) or RGMII port
-
-xRX300:
-GMAC0: RGMII port
-GMAC1: GPHY2 (GMII)
-GMAC2: GPHY0 (GMII)
-GMAC3: GPHY0 (MII)
-GMAC4: GPHY1 (GMII)
-GMAC5: GPHY1 (MII) or RGMII port
-
-xRX330:
-GMAC0: RGMII, GMII or RMII port
-GMAC1: GPHY2 (GMII)
-GMAC2: GPHY0 (GMII)
-GMAC3: GPHY0 (MII) or GPHY3 (GMII)
-GMAC4: GPHY1 (GMII)
-GMAC5: GPHY1 (MII), RGMII or RMII port
-
-Tested on D-Link DWR966 (xRX330) with OpenWRT.
-
-Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/lantiq_gswip.c | 142 ++++++++++++++++++++++++++-------
- 1 file changed, 113 insertions(+), 29 deletions(-)
-
---- a/drivers/net/dsa/lantiq_gswip.c
-+++ b/drivers/net/dsa/lantiq_gswip.c
-@@ -1,6 +1,6 @@
- // SPDX-License-Identifier: GPL-2.0
- /*
-- * Lantiq / Intel GSWIP switch driver for VRX200 SoCs
-+ * Lantiq / Intel GSWIP switch driver for VRX200, xRX300 and xRX330 SoCs
- *
- * Copyright (C) 2010 Lantiq Deutschland
- * Copyright (C) 2012 John Crispin <john@phrozen.org>
-@@ -104,6 +104,7 @@
- #define GSWIP_MII_CFG_MODE_RMIIP 0x2
- #define GSWIP_MII_CFG_MODE_RMIIM 0x3
- #define GSWIP_MII_CFG_MODE_RGMII 0x4
-+#define GSWIP_MII_CFG_MODE_GMII 0x9
- #define GSWIP_MII_CFG_MODE_MASK 0xf
- #define GSWIP_MII_CFG_RATE_M2P5 0x00
- #define GSWIP_MII_CFG_RATE_M25 0x10
-@@ -241,6 +242,7 @@
- struct gswip_hw_info {
- int max_ports;
- int cpu_port;
-+ const struct dsa_switch_ops *ops;
- };
-
- struct xway_gphy_match_data {
-@@ -1438,12 +1440,42 @@ static int gswip_port_fdb_dump(struct ds
- return 0;
- }
-
--static void gswip_phylink_validate(struct dsa_switch *ds, int port,
-- unsigned long *supported,
-- struct phylink_link_state *state)
-+static void gswip_phylink_set_capab(unsigned long *supported,
-+ struct phylink_link_state *state)
- {
- __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-
-+ /* Allow all the expected bits */
-+ phylink_set(mask, Autoneg);
-+ phylink_set_port_modes(mask);
-+ phylink_set(mask, Pause);
-+ phylink_set(mask, Asym_Pause);
-+
-+ /* With the exclusion of MII, Reverse MII and Reduced MII, we
-+ * support Gigabit, including Half duplex
-+ */
-+ if (state->interface != PHY_INTERFACE_MODE_MII &&
-+ state->interface != PHY_INTERFACE_MODE_REVMII &&
-+ state->interface != PHY_INTERFACE_MODE_RMII) {
-+ phylink_set(mask, 1000baseT_Full);
-+ phylink_set(mask, 1000baseT_Half);
-+ }
-+
-+ phylink_set(mask, 10baseT_Half);
-+ phylink_set(mask, 10baseT_Full);
-+ phylink_set(mask, 100baseT_Half);
-+ phylink_set(mask, 100baseT_Full);
-+
-+ bitmap_and(supported, supported, mask,
-+ __ETHTOOL_LINK_MODE_MASK_NBITS);
-+ bitmap_and(state->advertising, state->advertising, mask,
-+ __ETHTOOL_LINK_MODE_MASK_NBITS);
-+}
-+
-+static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port,
-+ unsigned long *supported,
-+ struct phylink_link_state *state)
-+{
- switch (port) {
- case 0:
- case 1:
-@@ -1470,38 +1502,54 @@ static void gswip_phylink_validate(struc
- return;
- }
-
-- /* Allow all the expected bits */
-- phylink_set(mask, Autoneg);
-- phylink_set_port_modes(mask);
-- phylink_set(mask, Pause);
-- phylink_set(mask, Asym_Pause);
-+ gswip_phylink_set_capab(supported, state);
-
-- /* With the exclusion of MII, Reverse MII and Reduced MII, we
-- * support Gigabit, including Half duplex
-- */
-- if (state->interface != PHY_INTERFACE_MODE_MII &&
-- state->interface != PHY_INTERFACE_MODE_REVMII &&
-- state->interface != PHY_INTERFACE_MODE_RMII) {
-- phylink_set(mask, 1000baseT_Full);
-- phylink_set(mask, 1000baseT_Half);
-+ return;
-+
-+unsupported:
-+ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-+ dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
-+ phy_modes(state->interface), port);
-+}
-+
-+static void gswip_xrx300_phylink_validate(struct dsa_switch *ds, int port,
-+ unsigned long *supported,
-+ struct phylink_link_state *state)
-+{
-+ switch (port) {
-+ case 0:
-+ if (!phy_interface_mode_is_rgmii(state->interface) &&
-+ state->interface != PHY_INTERFACE_MODE_GMII &&
-+ state->interface != PHY_INTERFACE_MODE_RMII)
-+ goto unsupported;
-+ break;
-+ case 1:
-+ case 2:
-+ case 3:
-+ case 4:
-+ if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
-+ goto unsupported;
-+ break;
-+ case 5:
-+ if (!phy_interface_mode_is_rgmii(state->interface) &&
-+ state->interface != PHY_INTERFACE_MODE_INTERNAL &&
-+ state->interface != PHY_INTERFACE_MODE_RMII)
-+ goto unsupported;
-+ break;
-+ default:
-+ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-+ dev_err(ds->dev, "Unsupported port: %i\n", port);
-+ return;
- }
-
-- phylink_set(mask, 10baseT_Half);
-- phylink_set(mask, 10baseT_Full);
-- phylink_set(mask, 100baseT_Half);
-- phylink_set(mask, 100baseT_Full);
-+ gswip_phylink_set_capab(supported, state);
-
-- bitmap_and(supported, supported, mask,
-- __ETHTOOL_LINK_MODE_MASK_NBITS);
-- bitmap_and(state->advertising, state->advertising, mask,
-- __ETHTOOL_LINK_MODE_MASK_NBITS);
- return;
-
- unsupported:
- bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
- dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
- phy_modes(state->interface), port);
-- return;
- }
-
- static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link)
-@@ -1636,6 +1684,9 @@ static void gswip_phylink_mac_config(str
- case PHY_INTERFACE_MODE_RGMII_TXID:
- miicfg |= GSWIP_MII_CFG_MODE_RGMII;
- break;
-+ case PHY_INTERFACE_MODE_GMII:
-+ miicfg |= GSWIP_MII_CFG_MODE_GMII;
-+ break;
- default:
- dev_err(ds->dev,
- "Unsupported interface: %d\n", state->interface);
-@@ -1762,7 +1813,7 @@ static int gswip_get_sset_count(struct d
- return ARRAY_SIZE(gswip_rmon_cnt);
- }
-
--static const struct dsa_switch_ops gswip_switch_ops = {
-+static const struct dsa_switch_ops gswip_xrx200_switch_ops = {
- .get_tag_protocol = gswip_get_tag_protocol,
- .setup = gswip_setup,
- .port_enable = gswip_port_enable,
-@@ -1778,7 +1829,31 @@ static const struct dsa_switch_ops gswip
- .port_fdb_add = gswip_port_fdb_add,
- .port_fdb_del = gswip_port_fdb_del,
- .port_fdb_dump = gswip_port_fdb_dump,
-- .phylink_validate = gswip_phylink_validate,
-+ .phylink_validate = gswip_xrx200_phylink_validate,
-+ .phylink_mac_config = gswip_phylink_mac_config,
-+ .phylink_mac_link_down = gswip_phylink_mac_link_down,
-+ .phylink_mac_link_up = gswip_phylink_mac_link_up,
-+ .get_strings = gswip_get_strings,
-+ .get_ethtool_stats = gswip_get_ethtool_stats,
-+ .get_sset_count = gswip_get_sset_count,
-+};
-+
-+static const struct dsa_switch_ops gswip_xrx300_switch_ops = {
-+ .get_tag_protocol = gswip_get_tag_protocol,
-+ .setup = gswip_setup,
-+ .port_enable = gswip_port_enable,
-+ .port_disable = gswip_port_disable,
-+ .port_bridge_join = gswip_port_bridge_join,
-+ .port_bridge_leave = gswip_port_bridge_leave,
-+ .port_fast_age = gswip_port_fast_age,
-+ .port_vlan_filtering = gswip_port_vlan_filtering,
-+ .port_vlan_add = gswip_port_vlan_add,
-+ .port_vlan_del = gswip_port_vlan_del,
-+ .port_stp_state_set = gswip_port_stp_state_set,
-+ .port_fdb_add = gswip_port_fdb_add,
-+ .port_fdb_del = gswip_port_fdb_del,
-+ .port_fdb_dump = gswip_port_fdb_dump,
-+ .phylink_validate = gswip_xrx300_phylink_validate,
- .phylink_mac_config = gswip_phylink_mac_config,
- .phylink_mac_link_down = gswip_phylink_mac_link_down,
- .phylink_mac_link_up = gswip_phylink_mac_link_up,
-@@ -2042,7 +2117,7 @@ static int gswip_probe(struct platform_d
- priv->ds->dev = dev;
- priv->ds->num_ports = priv->hw_info->max_ports;
- priv->ds->priv = priv;
-- priv->ds->ops = &gswip_switch_ops;
-+ priv->ds->ops = priv->hw_info->ops;
- priv->dev = dev;
- version = gswip_switch_r(priv, GSWIP_VERSION);
-
-@@ -2126,10 +2201,19 @@ static int gswip_remove(struct platform_
- static const struct gswip_hw_info gswip_xrx200 = {
- .max_ports = 7,
- .cpu_port = 6,
-+ .ops = &gswip_xrx200_switch_ops,
-+};
-+
-+static const struct gswip_hw_info gswip_xrx300 = {
-+ .max_ports = 7,
-+ .cpu_port = 6,
-+ .ops = &gswip_xrx300_switch_ops,
- };
-
- static const struct of_device_id gswip_of_match[] = {
- { .compatible = "lantiq,xrx200-gswip", .data = &gswip_xrx200 },
-+ { .compatible = "lantiq,xrx300-gswip", .data = &gswip_xrx300 },
-+ { .compatible = "lantiq,xrx330-gswip", .data = &gswip_xrx300 },
- {},
- };
- MODULE_DEVICE_TABLE(of, gswip_of_match);
struct gswip_hw_info {
int max_ports;
int cpu_port;
-@@ -858,10 +868,6 @@ static int gswip_setup(struct dsa_switch
+@@ -846,10 +856,6 @@ static int gswip_setup(struct dsa_switch
gswip_switch_mask(priv, 0, GSWIP_PCE_PCTRL_0_INGRESS,
GSWIP_PCE_PCTRL_0p(cpu_port));
gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD,
GSWIP_BM_QUEUE_GCTRL);
-@@ -878,6 +884,8 @@ static int gswip_setup(struct dsa_switch
+@@ -866,6 +872,8 @@ static int gswip_setup(struct dsa_switch
return err;
}
+ ds->mtu_enforcement_ingress = true;
+
gswip_port_enable(ds, cpu_port, NULL);
- return 0;
- }
-@@ -1472,6 +1480,39 @@ static void gswip_phylink_set_capab(unsi
- __ETHTOOL_LINK_MODE_MASK_NBITS);
+
+ ds->configure_vlan_while_not_filtering = false;
+@@ -1456,6 +1464,39 @@ static void gswip_phylink_set_capab(unsi
+ linkmode_and(state->advertising, state->advertising, mask);
}
+static int gswip_port_max_mtu(struct dsa_switch *ds, int port)
static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port,
unsigned long *supported,
struct phylink_link_state *state)
-@@ -1829,6 +1870,8 @@ static const struct dsa_switch_ops gswip
+@@ -1812,6 +1853,8 @@ static const struct dsa_switch_ops gswip
.port_fdb_add = gswip_port_fdb_add,
.port_fdb_del = gswip_port_fdb_del,
.port_fdb_dump = gswip_port_fdb_dump,
.phylink_validate = gswip_xrx200_phylink_validate,
.phylink_mac_config = gswip_phylink_mac_config,
.phylink_mac_link_down = gswip_phylink_mac_link_down,
-@@ -1853,6 +1896,8 @@ static const struct dsa_switch_ops gswip
+@@ -1836,6 +1879,8 @@ static const struct dsa_switch_ops gswip
.port_fdb_add = gswip_port_fdb_add,
.port_fdb_del = gswip_port_fdb_del,
.port_fdb_dump = gswip_port_fdb_dump,
ch_rx->dma.nr = XRX200_DMA_RX;
ch_rx->dma.dev = priv->dev;
-@@ -584,6 +587,18 @@ static int xrx200_probe(struct platform_
+@@ -575,6 +578,18 @@ static int xrx200_probe(struct platform_
if (err)
eth_hw_addr_random(net_dev);
ch_rx->dma.nr = XRX200_DMA_RX;
ch_rx->dma.dev = priv->dev;
-@@ -587,18 +586,6 @@ static int xrx200_probe(struct platform_
+@@ -578,18 +577,6 @@ static int xrx200_probe(struct platform_
if (err)
eth_hw_addr_random(net_dev);
--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
-@@ -606,8 +606,10 @@ static int xrx200_probe(struct platform_
+@@ -597,8 +597,10 @@ static int xrx200_probe(struct platform_
PMAC_HD_CTL);
/* setup NAPI */
}
static int xrx200_probe(struct platform_device *pdev)
-@@ -554,6 +569,7 @@ static int xrx200_probe(struct platform_
+@@ -553,6 +568,7 @@ static int xrx200_probe(struct platform_
net_dev->min_mtu = ETH_ZLEN;
net_dev->max_mtu = XRX200_DMA_DATA_LEN - xrx200_max_frame_len(0);
priv->rx_buf_size = xrx200_buffer_size(ETH_DATA_LEN);
+ priv->rx_skb_size = xrx200_skb_size(priv->rx_buf_size);
/* load the memory ranges */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->pmac_reg = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
projects / openwrt / openwrt.git / commitdiff