kirkwood: add kernel 4.19 support
authorPaul Wassi <p.wassi@gmx.at>
Thu, 27 Dec 2018 14:39:36 +0000 (15:39 +0100)
committerHauke Mehrtens <hauke@hauke-m.de>
Sun, 17 Feb 2019 18:22:39 +0000 (19:22 +0100)
Add patches for 4.19
Drop patch 200-disable-tso, as the packet corruption was fixed in
kernel commit 3b89624ab54b9dc2d92fc08ce2670e5f19ad8ec8

Restructure the DTS for Marvell switch in 104-ea3500 and 105-ea4500
to fix DTC warning.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
15 files changed:
target/linux/kirkwood/config-4.19 [new file with mode: 0644]
target/linux/kirkwood/patches-4.19/100-ib62x0.patch [new file with mode: 0644]
target/linux/kirkwood/patches-4.19/101-iconnect.patch [new file with mode: 0644]
target/linux/kirkwood/patches-4.19/102-dockstar.patch [new file with mode: 0644]
target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch [new file with mode: 0644]
target/linux/kirkwood/patches-4.19/104-ea3500.patch [new file with mode: 0644]
target/linux/kirkwood/patches-4.19/105-ea4500.patch [new file with mode: 0644]
target/linux/kirkwood/patches-4.19/105-goflexhome.patch [new file with mode: 0644]
target/linux/kirkwood/patches-4.19/106-goflexnet.patch [new file with mode: 0644]
target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch [new file with mode: 0644]
target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch [new file with mode: 0644]
target/linux/kirkwood/patches-4.19/108-on100.patch [new file with mode: 0644]
target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch [new file with mode: 0644]
target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch [new file with mode: 0644]
target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch [new file with mode: 0644]

diff --git a/target/linux/kirkwood/config-4.19 b/target/linux/kirkwood/config-4.19
new file mode 100644 (file)
index 0000000..2cc45af
--- /dev/null
@@ -0,0 +1,345 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_KCOV=y
+CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
+CONFIG_ARCH_HAS_PHYS_TO_DMA=y
+CONFIG_ARCH_HAS_SET_MEMORY=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
+CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_CPU_AUTO=y
+# CONFIG_ARCH_MULTI_V4 is not set
+# CONFIG_ARCH_MULTI_V4T is not set
+CONFIG_ARCH_MULTI_V4_V5=y
+CONFIG_ARCH_MULTI_V5=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_LIBATA_LEDS=y
+CONFIG_ARM=y
+# CONFIG_ARMADA_THERMAL is not set
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_ATA=y
+CONFIG_ATAGS=y
+CONFIG_ATA_LEDS=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_SCSI_REQUEST=y
+CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_FEROCEON=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FEROCEON=y
+# CONFIG_CPU_FEROCEON_OLD_ID is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_FEROCEON=y
+CONFIG_CPU_USE_DOMAINS=y
+CONFIG_CRC16=y
+# CONFIG_CRC32_SARWATE is not set
+CONFIG_CRC32_SLICEBY8=y
+CONFIG_CRYPTO_ACOMP2=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_MARVELL_CESA=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y
+# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
+CONFIG_DEBUG_UART_8250=y
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
+CONFIG_DEBUG_UART_8250_SHIFT=2
+# CONFIG_DEBUG_UART_8250_WORD is not set
+CONFIG_DEBUG_UART_PHYS=0xf1012000
+CONFIG_DEBUG_UART_VIRT=0xfed12000
+CONFIG_DEBUG_UNCOMPRESS=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DLCI is not set
+CONFIG_DNOTIFY=y
+CONFIG_DTC=y
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EXT4_FS=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FRAME_POINTER=y
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ATOMIC64=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GLOB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_MVEBU=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_HAVE_EBPF_JIT=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_RSEQ=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_PXA is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+CONFIG_KIRKWOOD_CLK=y
+CONFIG_KIRKWOOD_THERMAL=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_NETXBIG=y
+CONFIG_LEDS_NS2=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MACH_KIRKWOOD=y
+CONFIG_MACH_MVEBU_ANY=y
+CONFIG_MANGLE_BOOTARGS=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_MVSDIO=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_MARVELL is not set
+CONFIG_MTD_NAND_ORION=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MV643XX_ETH=y
+CONFIG_MVEBU_CLK_COMMON=y
+CONFIG_MVEBU_MBUS=y
+CONFIG_MVMDIO=y
+# CONFIG_MVNETA is not set
+# CONFIG_MVPP2 is not set
+CONFIG_MVSW61XX_PHY=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_KUSER_HELPERS=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NLS=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NVMEM=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_ORION_IRQCHIP=y
+CONFIG_ORION_TIMER=y
+CONFIG_ORION_WATCHDOG=y
+CONFIG_OUTER_CACHE=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_MVEBU=y
+# CONFIG_PCI_V3_SEMI is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
+CONFIG_PHY_MVEBU_SATA=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_KIRKWOOD=y
+CONFIG_PINCTRL_MVEBU=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PLAT_ORION=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+# CONFIG_POWER_RESET_QNAP is not set
+CONFIG_POWER_SUPPLY=y
+CONFIG_RATIONAL=y
+CONFIG_REFCOUNT_FULL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGMAP_SPI=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MV=y
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SATA_MV=y
+CONFIG_SCSI=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_FSL=y
+# CONFIG_SERIAL_MVEBU_UART is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SG_POOL=y
+CONFIG_SOC_BUS=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+# CONFIG_SPI_ARMADA_3700 is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_ORION=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+CONFIG_SRAM=y
+CONFIG_SRAM_EXEC=y
+CONFIG_SRCU=y
+CONFIG_SWCONFIG=y
+CONFIG_SWPHY=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_OF=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TINY_SRCU=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_ORION=y
+# CONFIG_USB_EHCI_HCD_PLATFORM is not set
+CONFIG_USB_LED_TRIG=y
+# CONFIG_USB_ROLE_SWITCH is not set
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+# CONFIG_VFP is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WAN=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/kirkwood/patches-4.19/100-ib62x0.patch b/target/linux/kirkwood/patches-4.19/100-ib62x0.patch
new file mode 100644 (file)
index 0000000..d1a5aa7
--- /dev/null
@@ -0,0 +1,30 @@
+--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
++++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
+@@ -6,7 +6,7 @@
+ / {
+       model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
+-      compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++      compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+       memory {
+               device_type = "memory";
+@@ -118,13 +118,13 @@
+       };
+       partition@100000 {
+-              label = "uImage";
+-              reg = <0x0100000 0x600000>;
++              label = "second stage u-boot";
++              reg = <0x100000 0x200000>;
+       };
+-      partition@700000 {
+-              label = "root";
+-              reg = <0x0700000 0xf900000>;
++      partition@200000 {
++              label = "ubi";
++              reg = <0x200000 0xfe00000>;
+       };
+ };
diff --git a/target/linux/kirkwood/patches-4.19/101-iconnect.patch b/target/linux/kirkwood/patches-4.19/101-iconnect.patch
new file mode 100644 (file)
index 0000000..ab47b5a
--- /dev/null
@@ -0,0 +1,50 @@
+--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
++++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
+@@ -16,8 +16,6 @@
+       chosen {
+               bootargs = "console=ttyS0,115200n8 earlyprintk";
+               stdout-path = &uart0;
+-              linux,initrd-start = <0x4500040>;
+-              linux,initrd-end   = <0x4800000>;
+       };
+       ocp@f1000000 {
+@@ -146,28 +144,23 @@
+       status = "okay";
+       partition@0 {
+-              label = "uboot";
+-              reg = <0x0000000 0xc0000>;
++              label = "u-boot";
++              reg = <0x0000000 0xe0000>;
+       };
+-      partition@a0000 {
+-              label = "env";
+-              reg = <0xa0000 0x20000>;
++      partition@e0000 {
++              label = "u-boot environment";
++              reg = <0xe0000 0x100000>;
+       };
+       partition@100000 {
+-              label = "zImage";
+-              reg = <0x100000 0x300000>;
++              label = "second stage u-boot";
++              reg = <0x100000 0x200000>;
+       };
+-      partition@540000 {
+-              label = "initrd";
+-              reg = <0x540000 0x300000>;
+-      };
+-
+-      partition@980000 {
+-              label = "boot";
+-              reg = <0x980000 0x1f400000>;
++      partition@200000 {
++              label = "ubi";
++              reg = <0x200000 0x1fe00000>;
+       };
+ };
diff --git a/target/linux/kirkwood/patches-4.19/102-dockstar.patch b/target/linux/kirkwood/patches-4.19/102-dockstar.patch
new file mode 100644 (file)
index 0000000..7462b93
--- /dev/null
@@ -0,0 +1,32 @@
+--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
++++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
+@@ -78,18 +78,22 @@
+       partition@0 {
+               label = "u-boot";
+-              reg = <0x0000000 0x100000>;
+-              read-only;
++              reg = <0x0000000 0xe0000>;
++      };
++
++      partition@e0000 {
++              label = "u-boot environment";
++              reg = <0xe0000 0x100000>;
+       };
+       partition@100000 {
+-              label = "uImage";
+-              reg = <0x0100000 0x400000>;
++              label = "second stage u-boot";
++              reg = <0x100000 0x200000>;
+       };
+-      partition@500000 {
+-              label = "data";
+-              reg = <0x0500000 0xfb00000>;
++      partition@200000 {
++              label = "ubi";
++              reg = <0x200000 0xfe00000>;
+       };
+ };
diff --git a/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch
new file mode 100644 (file)
index 0000000..9036ead
--- /dev/null
@@ -0,0 +1,33 @@
+--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
++++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+@@ -186,18 +186,18 @@
+       };
+       partition@a0000 {
+-              label = "env";
++              label = "u-boot environment";
+               reg = <0xa0000 0x20000>;
+               read-only;
+       };
+       partition@100000 {
+-              label = "uImage";
++              label = "kernel";
+               reg = <0x100000 0x300000>;
+       };
+       partition@400000 {
+-              label = "rootfs";
++              label = "ubi";
+               reg = <0x400000 0x1C00000>;
+       };
+ };
+@@ -211,7 +211,7 @@
+ };
+ &eth0 {
+-      status = "okay";
++      status = "disabled";
+       ethernet0-port@0 {
+               speed = <1000>;
+               duplex = <1>;
diff --git a/target/linux/kirkwood/patches-4.19/104-ea3500.patch b/target/linux/kirkwood/patches-4.19/104-ea3500.patch
new file mode 100644 (file)
index 0000000..45dc670
--- /dev/null
@@ -0,0 +1,259 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -269,6 +269,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+       kirkwood-linkstation-lswsxl.dtb \
+       kirkwood-linkstation-lswvl.dtb \
+       kirkwood-linkstation-lswxl.dtb \
++      kirkwood-linksys-audi.dtb \
+       kirkwood-linksys-viper.dtb \
+       kirkwood-lschlv2.dtb \
+       kirkwood-lsxhl.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
+@@ -0,0 +1,246 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
++ *
++ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
++ * (c) 2013 Deutsche Telekom Innovation Laboratories
++ * (c) 2014 Luka Perkov <luka@openwrt.org>
++ * (c) 2014 Dan Walters <dan@walters.io>
++ *
++ */
++
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6282.dtsi"
++
++/ {
++      model = "Linksys Audi (EA3500)";
++      compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
++
++      memory@0 {
++              device_type = "memory";
++              reg = <0x00000000 0x4000000>;
++      };
++
++      aliases {
++              serial0 = &uart0;
++      };
++
++      chosen {
++              stdout-path = "serial0:115200n8";
++      };
++
++      gpio_keys {
++              compatible = "gpio-keys";
++              pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
++              pinctrl-names = "default";
++
++              wps {
++                      label = "WPS Button";
++                      linux,code = <KEY_WPS_BUTTON>;
++                      gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
++              };
++
++              reset {
++                      label = "Reset Button";
++                      linux,code = <KEY_RESTART>;
++                      gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
++              };
++      };
++
++      gpio-leds {
++              compatible = "gpio-leds";
++              pinctrl-0 = < &pmx_led_green_power >;
++              pinctrl-names = "default";
++
++              green-power {
++                      label = "audi:green:power";
++                      gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
++              };
++      };
++
++      switches {
++              #address-cells = <1>;
++              #size-cells = <0>;
++
++              mvsw61xx@10 {
++                      compatible = "marvell,88e6171";
++                      status = "okay";
++                      reg = <0x10>;
++
++                      mii-bus = <&mdio>;
++                      cpu-port-0 = <5>;
++                      cpu-port-1 = <6>;
++                      is-indirect;
++              };
++      };
++
++      dsa {
++              compatible = "marvell,dsa";
++              #address-cells = <2>;
++              #size-cells = <0>;
++
++              dsa,ethernet = <&eth0port>;
++              dsa,mii-bus = <&mdio>;
++
++              switch@16,0 {
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      reg = <16 0>;   /* MDIO address 16, switch 0 in tree */
++
++                      port@0 {
++                              reg = <0>;
++                              label = "ethernet1";
++                      };
++
++                      port@1 {
++                              reg = <1>;
++                              label = "ethernet2";
++                      };
++
++                      port@2 {
++                              reg = <2>;
++                              label = "ethernet3";
++                      };
++
++                      port@3 {
++                              reg = <3>;
++                              label = "ethernet4";
++                      };
++
++                      port@4 {
++                              reg = <4>;
++                              label = "internet";
++                      };
++
++                      port@5 {
++                              reg = <5>;
++                              label = "cpu";
++                      };
++              };
++      };
++};
++
++&pinctrl {
++      pmx_led_green_power: pmx-led-green-power {
++              marvell,pins = "mpp7";
++              marvell,function = "gpo";
++      };
++      pmx_btn_wps: pmx-btn-wps {
++              marvell,pins = "mpp47";
++              marvell,function = "gpio";
++      };
++      pmx_btn_reset: pmx-btn-reset {
++              marvell,pins = "mpp48";
++              marvell,function = "gpio";
++      };
++};
++
++&nand {
++      status = "okay";
++      pinctrl-0 = <&pmx_nand>;
++      pinctrl-names = "default";
++
++      partitions {
++              compatible = "fixed-partitions";
++              #address-cells = <1>;
++              #size-cells = <1>;
++
++              partition@0 {
++                      label = "u-boot";
++                      reg = <0x0 0x80000>;
++                      read-only;
++              };
++
++              partition@80000 {
++                      label = "u_env";
++                      reg = <0x80000 0x4000>;
++              };
++
++              partition@84000 {
++                      label = "s_env";
++                      reg = <0x84000 0x4000>;
++              };
++
++              partition@200000 {
++                      label = "kernel1";
++                      reg = <0x200000 0x290000>;
++              };
++
++              partition@490000 {
++                      label = "rootfs1";
++                      reg = <0x490000 0x1170000>;
++              };
++
++              partition@1600000 {
++                      label = "kernel2";
++                      reg = <0x1600000 0x290000>;
++              };
++
++              partition@1890000 {
++                      label = "rootfs2";
++                      reg = <0x1890000 0x1170000>;
++              };
++
++              partition@2a00000 {
++                      label = "syscfg";
++                      reg = <0x2a00000  0x1600000>;
++              };
++
++              partition@88000 {
++                      label = "unused";
++                      reg = <0x88000 0x178000>;
++              };
++
++      };
++};
++
++&pciec {
++      status = "okay";
++};
++
++&pcie0 {
++      status = "okay";
++};
++
++&pcie1 {
++      status = "okay";
++};
++
++&mdio {
++      status = "okay";
++};
++
++&uart0 {
++      status = "okay";
++};
++
++/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
++ * fixed speed and duplex.
++ */
++&eth0 {
++      status = "okay";
++      ethernet0-port@0 {
++              speed = <1000>;
++              duplex = <1>;
++      };
++};
++
++/* eth1 is connected to the switch at port 6. However DSA only supports a
++ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
++ */
++&eth1 {
++      status = "okay";
++      ethernet1-port@0 {
++              speed = <1000>;
++              duplex = <1>;
++      };
++};
++
++/* There is no battery on the board, so the RTC does not keep
++ * time when there is no power, making it useless.
++ */
++&rtc {
++      status = "disabled";
++};
diff --git a/target/linux/kirkwood/patches-4.19/105-ea4500.patch b/target/linux/kirkwood/patches-4.19/105-ea4500.patch
new file mode 100644 (file)
index 0000000..71e0087
--- /dev/null
@@ -0,0 +1,126 @@
+--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
++++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+@@ -67,9 +67,23 @@
+               };
+       };
+-      dsa {
+-              status = "disabled";
++      switches {
++              #address-cells = <1>;
++              #size-cells = <0>;
++
++              mvsw61xx@10 {
++                      compatible = "marvell,88e6171";
++                      status = "okay";
++                      reg = <0x10>;
++
++                      mii-bus = <&mdio>;
++                      cpu-port-0 = <5>;
++                      cpu-port-1 = <6>;
++                      is-indirect;
++              };
++      };
++      dsa {
+               compatible = "marvell,dsa";
+               #address-cells = <2>;
+               #size-cells = <0>;
+@@ -161,22 +175,22 @@
+               };
+               partition@200000 {
+-                      label = "kernel";
++                      label = "kernel1";
+                       reg = <0x200000 0x2A0000>;
+               };
+               partition@4a0000 {
+-                      label = "rootfs";
++                      label = "rootfs1";
+                       reg = <0x4A0000 0x1760000>;
+               };
+               partition@1c00000 {
+-                      label = "alt_kernel";
++                      label = "kernel2";
+                       reg = <0x1C00000 0x2A0000>;
+               };
+               partition@1ea0000 {
+-                      label = "alt_rootfs";
++                      label = "rootfs2";
+                       reg = <0x1EA0000 0x1760000>;
+               };
+@@ -207,53 +221,6 @@
+ &mdio {
+       status = "okay";
+-
+-      switch@10 {
+-              compatible = "marvell,mv88e6085";
+-              #address-cells = <1>;
+-              #size-cells = <0>;
+-              reg = <16>;
+-
+-              ports {
+-                      #address-cells = <1>;
+-                      #size-cells = <0>;
+-
+-                      port@0 {
+-                              reg = <0>;
+-                              label = "ethernet1";
+-                      };
+-
+-                      port@1 {
+-                              reg = <1>;
+-                              label = "ethernet2";
+-                      };
+-
+-                      port@2 {
+-                              reg = <2>;
+-                              label = "ethernet3";
+-                      };
+-
+-                      port@3 {
+-                              reg = <3>;
+-                              label = "ethernet4";
+-                      };
+-
+-                      port@4 {
+-                              reg = <4>;
+-                              label = "internet";
+-                      };
+-
+-                      port@5 {
+-                              reg = <5>;
+-                              label = "cpu";
+-                              ethernet = <&eth0port>;
+-                              fixed-link {
+-                                      speed = <1000>;
+-                                      full-duplex;
+-                              };
+-                      };
+-              };
+-      };
+ };
+ &uart0 {
+@@ -272,10 +239,14 @@
+ };
+ /* eth1 is connected to the switch at port 6. However DSA only supports a
+- * single CPU port. So leave this port disabled to avoid confusion.
++ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
+  */
+ &eth1 {
+-      status = "disabled";
++      status = "okay";
++      ethernet1-port@0 {
++              speed = <1000>;
++              duplex = <1>;
++      };
+ };
+ /* There is no battery on the board, so the RTC does not keep
diff --git a/target/linux/kirkwood/patches-4.19/105-goflexhome.patch b/target/linux/kirkwood/patches-4.19/105-goflexhome.patch
new file mode 100644 (file)
index 0000000..9ac30b6
--- /dev/null
@@ -0,0 +1,130 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -256,6 +256,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+       kirkwood-ds411.dtb \
+       kirkwood-ds411j.dtb \
+       kirkwood-ds411slim.dtb \
++      kirkwood-goflexhome.dtb \
+       kirkwood-goflexnet.dtb \
+       kirkwood-guruplug-server-plus.dtb \
+       kirkwood-ib62x0.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts
+@@ -0,0 +1,117 @@
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6281.dtsi"
++
++/ {
++      model = "Seagate GoFlex Home";
++      compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++      memory@0 {
++              device_type = "memory";
++              reg = <0x00000000 0x8000000>;
++      };
++
++      chosen {
++              bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
++              stdout-path = &uart0;
++      };
++
++      ocp@f1000000 {
++              pinctrl: pin-controller@10000 {
++                      pmx_usb_power_enable: pmx-usb-power-enable {
++                              marvell,pins = "mpp29";
++                              marvell,function = "gpio";
++                      };
++                      pmx_led_white: pmx-led-white {
++                              marvell,pins = "mpp40";
++                              marvell,function = "gpio";
++                      };
++                      pmx_led_green: pmx-led_green {
++                              marvell,pins = "mpp46";
++                              marvell,function = "gpio";
++                      };
++                      pmx_led_orange: pmx-led-orange {
++                              marvell,pins = "mpp47";
++                              marvell,function = "gpio";
++                      };
++              };
++              serial@12000 {
++                      status = "ok";
++              };
++
++              sata@80000 {
++                      status = "okay";
++                      nr-ports = <2>;
++              };
++
++      };
++      gpio-leds {
++              compatible = "gpio-leds";
++
++              health {
++                      label = "status:green:health";
++                      gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
++                      linux,default-trigger = "default-on";
++              };
++              fault {
++                      label = "status:orange:fault";
++                      gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
++              };
++              misc {
++                      label = "status:white:misc";
++                      gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
++                      linux,default-trigger = "disk-activity";
++              };
++      };
++      regulators {
++              compatible = "simple-bus";
++              #address-cells = <1>;
++              #size-cells = <0>;
++              pinctrl-0 = <&pmx_usb_power_enable>;
++              pinctrl-names = "default";
++
++              usb_power: regulator@1 {
++                      compatible = "regulator-fixed";
++                      reg = <1>;
++                      regulator-name = "USB Power";
++                      regulator-min-microvolt = <5000000>;
++                      regulator-max-microvolt = <5000000>;
++                      enable-active-high;
++                      regulator-always-on;
++                      regulator-boot-on;
++                      gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
++              };
++      };
++};
++
++&nand {
++      chip-delay = <40>;
++      status = "okay";
++
++      partition@0 {
++              label = "u-boot";
++              reg = <0x0000000 0x100000>;
++              read-only;
++      };
++
++      partition@100000 {
++              label = "ubi";
++              reg = <0x100000 0x0ff00000>;
++      };
++};
++
++&mdio {
++      status = "okay";
++
++      ethphy0: ethernet-phy@0 {
++              reg = <0>;
++      };
++};
++
++&eth0 {
++      status = "okay";
++      ethernet0-port@0 {
++              phy-handle = <&ethphy0>;
++      };
++};
diff --git a/target/linux/kirkwood/patches-4.19/106-goflexnet.patch b/target/linux/kirkwood/patches-4.19/106-goflexnet.patch
new file mode 100644 (file)
index 0000000..b221768
--- /dev/null
@@ -0,0 +1,23 @@
+--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
++++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
+@@ -159,18 +159,8 @@
+       };
+       partition@100000 {
+-              label = "uImage";
+-              reg = <0x0100000 0x400000>;
+-      };
+-
+-      partition@500000 {
+-              label = "pogoplug";
+-              reg = <0x0500000 0x2000000>;
+-      };
+-
+-      partition@2500000 {
+-              label = "root";
+-              reg = <0x02500000 0xd800000>;
++              label = "ubi";
++              reg = <0x0100000 0x0ff00000>;
+       };
+ };
diff --git a/target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch b/target/linux/kirkwood/patches-4.19/107-01-zyxel-nsa3x0-common-nand-partitions.patch
new file mode 100644 (file)
index 0000000..df65403
--- /dev/null
@@ -0,0 +1,48 @@
+--- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
++++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
+@@ -112,40 +112,16 @@
+       partition@0 {
+               label = "uboot";
+-              reg = <0x0000000 0x0100000>;
++              reg = <0x0000000 0x00c0000>;
+               read-only;
+       };
+       partition@100000 {
+               label = "uboot_env";
+-              reg = <0x0100000 0x0080000>;
++              reg = <0x00c0000 0x0080000>;
+       };
+-      partition@180000 {
+-              label = "key_store";
+-              reg = <0x0180000 0x0080000>;
+-      };
+-      partition@200000 {
+-              label = "info";
+-              reg = <0x0200000 0x0080000>;
+-      };
+-      partition@280000 {
+-              label = "etc";
+-              reg = <0x0280000 0x0a00000>;
+-      };
+-      partition@c80000 {
+-              label = "kernel_1";
+-              reg = <0x0c80000 0x0a00000>;
+-      };
+-      partition@1680000 {
+-              label = "rootfs1";
+-              reg = <0x1680000 0x2fc0000>;
+-      };
+-      partition@4640000 {
+-              label = "kernel_2";
+-              reg = <0x4640000 0x0a00000>;
+-      };
+-      partition@5040000 {
+-              label = "rootfs2";
+-              reg = <0x5040000 0x2fc0000>;
++      partition@140000 {
++              label = "ubi";
++              reg = <0x0140000 0x7ec0000>;
+       };
+ };
diff --git a/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch b/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch
new file mode 100644 (file)
index 0000000..f8b963e
--- /dev/null
@@ -0,0 +1,147 @@
+kirkwood: add nsa310b dtb, a zyxel nsa310 variant
+
+add support to a nsa310 variant with red/green usb led
+and lm85 temp/fan controller
+
+Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
+
+NOTE: this patch can be upstreamed as-is, LEDE-specific
+               nand partitions are set in another patch
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -287,6 +287,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+       kirkwood-ns2mini.dtb \
+       kirkwood-nsa310.dtb \
+       kirkwood-nsa310a.dtb \
++      kirkwood-nsa310b.dtb \
+       kirkwood-nsa320.dtb \
+       kirkwood-nsa325.dtb \
+       kirkwood-openblocks_a6.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts
+@@ -0,0 +1,124 @@
++/dts-v1/;
++
++#include "kirkwood-nsa3x0-common.dtsi"
++
++/*
++ * There are at least two different NSA310 designs. This variant has
++ * a red/green USB Led (same as nsa310) and a lm85 temp/fan controller.
++ */
++
++/ {
++      model = "ZyXEL NSA310b";
++      compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++      memory@0 {
++              device_type = "memory";
++              reg = <0x00000000 0x10000000>;
++      };
++
++      chosen {
++              bootargs = "console=ttyS0,115200";
++              stdout-path = &uart0;
++      };
++
++      ocp@f1000000 {
++              pinctrl: pin-controller@10000 {
++                      pinctrl-names = "default";
++
++                      pmx_led_esata_green: pmx-led-esata-green {
++                              marvell,pins = "mpp12";
++                              marvell,function = "gpio";
++                      };
++
++                      pmx_led_esata_red: pmx-led-esata-red {
++                              marvell,pins = "mpp13";
++                              marvell,function = "gpio";
++                      };
++
++                      pmx_led_usb_green: pmx-led-usb-green {
++                              marvell,pins = "mpp15";
++                              marvell,function = "gpio";
++                      };
++
++                      pmx_led_usb_red: pmx-led-usb-red {
++                              marvell,pins = "mpp16";
++                              marvell,function = "gpio";
++                      };
++
++                      pmx_led_sys_green: pmx-led-sys-green {
++                              marvell,pins = "mpp28";
++                              marvell,function = "gpio";
++                      };
++
++                      pmx_led_sys_red: pmx-led-sys-red {
++                              marvell,pins = "mpp29";
++                              marvell,function = "gpio";
++                      };
++
++                      pmx_led_hdd_green: pmx-led-hdd-green {
++                              marvell,pins = "mpp41";
++                              marvell,function = "gpio";
++                      };
++
++                      pmx_led_hdd_red: pmx-led-hdd-red {
++                              marvell,pins = "mpp42";
++                              marvell,function = "gpio";
++                      };
++
++              };
++
++              i2c@11000 {
++                      status = "okay";
++
++                      lm85: lm85@2e {
++                              compatible = "national,lm85";
++                              reg = <0x2e>;
++                      };
++              };
++      };
++
++      gpio-leds {
++              compatible = "gpio-leds";
++
++              green-sys {
++                      label = "nsa310:green:sys";
++                      gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
++              };
++              red-sys {
++                      label = "nsa310:red:sys";
++                      gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
++              };
++              green-hdd {
++                      label = "nsa310:green:hdd";
++                      gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
++              };
++              red-hdd {
++                      label = "nsa310:red:hdd";
++                      gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
++              };
++              green-esata {
++                      label = "nsa310:green:esata";
++                      gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
++              };
++              red-esata {
++                      label = "nsa310:red:esata";
++                      gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
++              };
++              green-usb {
++                      label = "nsa310:green:usb";
++                      gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
++              };
++              red-usb {
++                      label = "nsa310:red:usb";
++                      gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
++              };
++              green-copy {
++                      label = "nsa310:green:copy";
++                      gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
++              };
++              red-copy {
++                      label = "nsa310:red:copy";
++                      gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
++              };
++      };
++};
diff --git a/target/linux/kirkwood/patches-4.19/108-on100.patch b/target/linux/kirkwood/patches-4.19/108-on100.patch
new file mode 100644 (file)
index 0000000..2f53595
--- /dev/null
@@ -0,0 +1,171 @@
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-on100.dts
+@@ -0,0 +1,158 @@
++/dts-v1/;
++
++#include "kirkwood.dtsi"
++#include "kirkwood-6282.dtsi"
++
++/ {
++      model = "Cisco Systems ON100";
++      compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
++
++      memory@0 {
++              device_type = "memory";
++              reg = <0x00000000 0x20000000>;
++      };
++
++      aliases {
++              serial0 = &uart0;
++      };
++
++      chosen {
++              bootargs = "console=ttyS0,115200n8 earlyprintk";
++              stdout-path = "serial0:115200n8";
++      };
++
++      gpio_keys {
++              compatible = "gpio-keys";
++              pinctrl-0 = <&pmx_btn_reset>;
++              pinctrl-names = "default";
++
++              reset {
++                      label = "Reset Button";
++                      linux,code = <KEY_RESTART>;
++                      gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
++              };
++      };
++
++      gpio-leds {
++              compatible = "gpio-leds";
++              pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
++              pinctrl-names = "default";
++
++              health-g {
++                      label = "on100:green:health";
++                      gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
++              };
++
++              health-r {
++                      label = "on100:red:health";
++                      gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
++              };
++
++              health2-g {
++                      label = "on100:green:health2";
++                      gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
++              };
++
++              health2-r {
++                      label = "on100:red:health2";
++                      gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
++              };
++      };
++};
++
++&eth0 {
++      status = "okay";
++
++      ethernet0-port@0 {
++              phy-handle = <&ethphy0>;
++              phy-connection-type = "rgmii-id";
++      };
++};
++
++&eth1 {
++      status = "okay";
++
++      ethernet1-port@0 {
++              phy-handle = <&ethphy1>;
++              phy-connection-type = "rgmii-id";
++      };
++};
++
++&mdio {
++      status = "okay";
++
++      ethphy0: ethernet-phy@0 {
++              /* Marvell 88E1121R */
++              compatible = "ethernet-phy-id0141.0cb0",
++                           "ethernet-phy-ieee802.3-c22";
++              reg = <0>;
++      };
++
++      ethphy1: ethernet-phy@1 {
++              /* Marvell 88E1121R */
++              compatible = "ethernet-phy-id0141.0cb0",
++                           "ethernet-phy-ieee802.3-c22";
++              reg = <1>;
++      };
++};
++
++&nand {
++      status = "okay";
++
++      partition@0 {
++              label = "u-boot";
++              reg = <0x00000000 0x000a0000>;
++              read-only;
++      };
++
++      partition@a0000 {
++              label = "u-boot environment";
++              reg = <0x000a0000 0x00020000>;
++              read-only;
++      };
++
++      partition@c0000 {
++              label = "kernel";
++              reg = <0x000c0000 0x00540000>;
++      };
++
++      partition@600000 {
++              label = "ubi";
++              reg = <0x00600000 0x1fa00000>;
++      };
++};
++
++&pinctrl {
++      pmx_led_health_r: pmx-led-health-r {
++              marvell,pins = "mpp45";
++              marvell,function = "gpio";
++      };
++
++      pmx_led_health_g: pmx-led-health-g {
++              marvell,pins = "mpp44";
++              marvell,function = "gpio";
++      };
++
++      pmx_led_health2_r: pmx-led-health2-r {
++              marvell,pins = "mpp47";
++              marvell,function = "gpio";
++      };
++
++      pmx_led_health2_g: pmx-led-health2-g {
++              marvell,pins = "mpp46";
++              marvell,function = "gpio";
++      };
++
++      pmx_btn_reset: pmx-led-reset {
++              marvell,pins = "mpp31";
++              marvell,function = "gpio";
++      };
++};
++
++&sdio {
++      status = "okay";
++};
++
++&uart0 {
++      status = "okay";
++};
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -290,6 +290,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+       kirkwood-nsa310b.dtb \
+       kirkwood-nsa320.dtb \
+       kirkwood-nsa325.dtb \
++      kirkwood-on100.dtb \
+       kirkwood-openblocks_a6.dtb \
+       kirkwood-openblocks_a7.dtb \
+       kirkwood-openrd-base.dtb \
diff --git a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
new file mode 100644 (file)
index 0000000..b547682
--- /dev/null
@@ -0,0 +1,59 @@
+--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
++++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+@@ -24,6 +24,7 @@
+       };
+       chosen {
++              bootargs = "console=ttyS0,115200";
+               stdout-path = "uart0:115200n8";
+       };
+@@ -37,8 +38,8 @@
+               eject {
+                       debounce-interval = <50>;
+                       wakeup-source;
+-                      linux,code = <KEY_EJECTCD>;
+-                      label = "Eject Button";
++                      linux,code = <KEY_RESTART>;
++                      label = "Reset";
+                       gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+               };
+       };
+@@ -137,29 +138,19 @@
+               #size-cells = <1>;
+               partition@0 {
+-                      label = "u-boot";
+-                      reg = <0x00000000 0x200000>;
++                      label = "uboot";
++                      reg = <0x00000000 0x1c0000>;
+                       read-only;
+               };
+-              partition@200000 {
+-                      label = "uImage";
+-                      reg = <0x00200000 0x300000>;
+-              };
+-
+-              partition@500000 {
+-                      label = "uImage2";
+-                      reg = <0x00500000 0x300000>;
++              partition@1c0000 {
++                      label = "uboot_env";
++                      reg = <0x001c0000 0x40000>;
+               };
+-              partition@800000 {
+-                      label = "failsafe";
+-                      reg = <0x00800000 0x800000>;
+-              };
+-
+-              partition@1000000 {
+-                      label = "root";
+-                      reg = <0x01000000 0x7000000>;
++              partition@200000 {
++                      label = "ubi";
++                      reg = <0x00200000 0x7e00000>;
+               };
+       };
+ };
diff --git a/target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-4.19/201-enable-sata-port-specific-led-triggers.patch
new file mode 100644 (file)
index 0000000..71d9bba
--- /dev/null
@@ -0,0 +1,10 @@
+--- a/arch/arm/mach-mvebu/Kconfig
++++ b/arch/arm/mach-mvebu/Kconfig
+@@ -118,6 +118,7 @@ config MACH_DOVE
+ config MACH_KIRKWOOD
+       bool "Marvell Kirkwood boards"
+       depends on ARCH_MULTI_V5
++      select ARCH_WANT_LIBATA_LEDS
+       select CPU_FEROCEON
+       select GPIOLIB
+       select KIRKWOOD_CLK
diff --git a/target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch b/target/linux/kirkwood/patches-4.19/202-linksys-find-active-root.patch
new file mode 100644 (file)
index 0000000..860d7b0
--- /dev/null
@@ -0,0 +1,62 @@
+The WRT1900AC among other Linksys routers uses a dual-firmware layout.
+Dynamically rename the active partition to "ubi".
+
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+---
+--- a/drivers/mtd/ofpart.c
++++ b/drivers/mtd/ofpart.c
+@@ -25,6 +25,8 @@ static bool node_has_compatible(struct d
+       return of_get_property(pp, "compatible", NULL);
+ }
++static int mangled_rootblock;
++
+ static int parse_fixed_partitions(struct mtd_info *master,
+                                 const struct mtd_partition **pparts,
+                                 struct mtd_part_parser_data *data)
+@@ -32,6 +34,7 @@ static int parse_fixed_partitions(struct
+       struct mtd_partition *parts;
+       struct device_node *mtd_node;
+       struct device_node *ofpart_node;
++      const char *owrtpart = "ubi";
+       const char *partname;
+       struct device_node *pp;
+       int nr_parts, i, ret = 0;
+@@ -110,9 +113,15 @@ static int parse_fixed_partitions(struct
+               parts[i].size = of_read_number(reg + a_cells, s_cells);
+               parts[i].of_node = pp;
+-              partname = of_get_property(pp, "label", &len);
+-              if (!partname)
+-                      partname = of_get_property(pp, "name", &len);
++              if (mangled_rootblock && (i == mangled_rootblock)) {
++                      partname = owrtpart;
++              } else {
++                      partname = of_get_property(pp, "label", &len);
++
++                      if (!partname)
++                              partname = of_get_property(pp, "name", &len);
++              }
++
+               parts[i].name = partname;
+               if (of_get_property(pp, "read-only", &len))
+@@ -219,6 +228,18 @@ static int __init ofpart_parser_init(voi
+       return 0;
+ }
++static int __init active_root(char *str)
++{
++      get_option(&str, &mangled_rootblock);
++
++      if (!mangled_rootblock)
++              return 1;
++
++      return 1;
++}
++
++__setup("mangled_rootblock=", active_root);
++
+ static void __exit ofpart_parser_exit(void)
+ {
+       deregister_mtd_parser(&ofpart_parser);