ramips: add support for GL.iNet GL-MT1300
authorXinfa Deng <xinfa.deng@gl-inet.com>
Wed, 16 Dec 2020 07:58:28 +0000 (15:58 +0800)
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>
Thu, 17 Dec 2020 11:05:26 +0000 (12:05 +0100)
The GL-MT1300 is a high-performance new generation pocket-sized router
that offers a powerful hardware and first-class cybersecurity protocol
with unique and modern design.

Specifications:
- SoC: MT7621A, Dual-Core @880MHz
- RAM: 256 MB DDR3
- Flash: 32 MB
- Ethernet: 3 x 10/100/1000: 2 x LAN + 1 x WAN
- Wireless: 1 x MT7615D Dual-Band 2.4GHz(400Mbps) + 5GHz(867Mbps)
- USB: 1 x USB 3.0 port
- Slot: 1 x MicroSD card slot
- Button: 1 x Reset button
- Switch: 1 x Mode switch
- LED: 1 x Blue LED + 1 x White LED

MAC addresses based on vendor firmware:
WAN : factory 0x4000
LAN : Mac from factory 0x4000 + 1
2.4GHz : factory 0x4
5GHz : Mac form factory 0x4 + 1

Flashing instructions:
1.Connect to one of LAN ports.
2.Set the static IP on the PC to 192.168.1.2.
3.Press the Reset button and power the device (do not release the button).
  After waiting for the blue led to flash 5 times, the white led will
  come on and release the button.
4.Browse the 192.168.1.1 web page and update firmware according to web
  tips.
5.The blue led will flash when the firmware is being upgraded.
6.The blue led stops blinking to indicate that the firmware upgrade is
  complete and U-Boot automatically starts the firmware.

For more information on GL-MT1300, see the OFFICIAL GL.iNet website:
https://www.gl-inet.com/products/gl-mt1300/

Signed-off-by: Xinfa Deng <xinfa.deng@gl-inet.com>
[add input-type for switch, wrap long line in 10_fix_wifi_mac]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts [new file with mode: 0644]
target/linux/ramips/image/mt7621.mk
target/linux/ramips/mt7621/base-files/etc/board.d/02_network
target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac

diff --git a/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts b/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts
new file mode 100644 (file)
index 0000000..49eeb46
--- /dev/null
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "glinet,gl-mt1300", "mediatek,mt7621-soc";
+       model = "GL.iNet GL-MT1300";
+
+       aliases {
+               led-boot = &led_run;
+               led-failsafe = &led_run;
+               led-running = &led_run;
+               led-upgrade = &led_run;
+               label-mac-device = &wan;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               switch {
+                       label = "switch";
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led_run: run {
+                       label = "blue:run";
+                       gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+               };
+
+               system {
+                       label = "white:system";
+                       gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
+               };
+       };
+};
+
+&i2c {
+       status = "okay";
+};
+
+&sdhci {
+       status = "okay";
+};
+
+&spi0 {
+       status = "okay";
+
+       flash@0 {
+               compatible = "mx25l25635f", "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <80000000>;
+               m25p,fast-read;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x30000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x30000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@40000 {
+                               label = "factory";
+                               reg = <0x40000 0x10000>;
+                               read-only;
+                       };
+
+                       partition@50000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x50000 0x1fb0000>;
+                       };
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pcie0 {
+       wifi@0,0 {
+               compatible = "mediatek,mt76";
+               reg = <0x0000 0 0 0 0>;
+               mediatek,mtd-eeprom = <&factory 0x0>;
+       };
+};
+
+&gmac0 {
+       mtd-mac-address = <&factory 0x4000>;
+       mtd-mac-address-increment = <1>;
+};
+
+&switch0 {
+       ports {
+               port@2 {
+                       status = "okay";
+                       label = "lan1";
+               };
+
+               port@3 {
+                       status = "okay";
+                       label = "lan2";
+               };
+
+               wan: port@4 {
+                       status = "okay";
+                       label = "wan";
+                       mtd-mac-address = <&factory 0x4000>;
+               };
+       };
+};
+
+&uartlite3 {
+       status = "okay";
+};
+
+&state_default {
+       gpio {
+               group = "wdt", "jtag";
+               function = "gpio";
+       };
+};
index fad1855..282152e 100644 (file)
@@ -475,6 +475,15 @@ define Device/gehua_ghl-r-001
 endef
 TARGET_DEVICES += gehua_ghl-r-001
 
 endef
 TARGET_DEVICES += gehua_ghl-r-001
 
+define Device/glinet_gl-mt1300
+  $(Device/dsa-migration)
+  IMAGE_SIZE := 32448k
+  DEVICE_VENDOR := GL.iNet
+  DEVICE_MODEL := GL-MT1300
+  DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3
+endef
+TARGET_DEVICES += glinet_gl-mt1300
+
 define Device/gnubee_gb-pc1
   $(Device/dsa-migration)
   DEVICE_VENDOR := GnuBee
 define Device/gnubee_gb-pc1
   $(Device/dsa-migration)
   DEVICE_VENDOR := GnuBee
index c5b3514..bca4cc2 100755 (executable)
@@ -14,6 +14,7 @@ ramips_setup_interfaces()
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
        asiarf,ap7621-nv1|\
                ucidef_set_interfaces_lan_wan "lan" "wan"
                ;;
        asiarf,ap7621-nv1|\
+       glinet,gl-mt1300|\
        lenovo,newifi-d1|\
        mikrotik,routerboard-m33g|\
        xiaomi,mi-router-3g|\
        lenovo,newifi-d1|\
        mikrotik,routerboard-m33g|\
        xiaomi,mi-router-3g|\
index b7a41f0..e7f778a 100644 (file)
@@ -10,6 +10,10 @@ PHYNBR=${DEVPATH##*/phy}
 board=$(board_name)
 
 case "$board" in
 board=$(board_name)
 
 case "$board" in
+       glinet,gl-mt1300)
+               [ "$PHYNBR" = "1" ] && \
+                       macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress
+               ;;
        linksys,ea7300-v1|\
        linksys,ea7300-v2|\
        linksys,ea7500-v2)
        linksys,ea7300-v1|\
        linksys,ea7300-v2|\
        linksys,ea7500-v2)