ath79: add support for Compex WPJ558 (16M)
authorRomain Mahoux <romain@mahoux.fr>
Tue, 8 Jun 2021 09:52:18 +0000 (11:52 +0200)
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>
Tue, 24 Aug 2021 23:42:17 +0000 (01:42 +0200)
Specifications:
- SoC: QCA9558
- DRAM: 128MB DDR2
- Flash: 16MB SPI-NOR
- Wireless: on-board abgn 2×2 2.4GHz radio
- Ethernet: 2x 10/100/1000 Mbps (1x 802.11af PoE)
- miniPCIe slot

Flash instruction:
- From u-boot

tftpboot 0x80500000 openwrt-ath79-generic-compex_wpj558-16m-squashfs-sysupgrade.bin
erase 0x9f030000 +$filesize
cp.b $fileaddr 0x9f030000 $filesize
boot

- From cpximg loader

The cpximg loader can be started either by holding the reset button
during power up. Once it's running, a TFTP-server under 192.168.1.1 will accept
the image appropriate for the board revision that is etched on the board.

For example, if the board is labelled '6A07':

tftp -v -m binary 192.168.1.1 -c put openwrt-ath79-generic-compex_wpj558-16m-squashfs-cpximg-6a07.bin

Signed-off-by: Romain Mahoux <romain@mahoux.fr>
[convert to nvmem, remove redundant lan_mac in 02_network]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
target/linux/ath79/dts/qca9558_compex_wpj558-16m.dts [new file with mode: 0644]
target/linux/ath79/generic/base-files/etc/board.d/02_network
target/linux/ath79/image/generic.mk

diff --git a/target/linux/ath79/dts/qca9558_compex_wpj558-16m.dts b/target/linux/ath79/dts/qca9558_compex_wpj558-16m.dts
new file mode 100644 (file)
index 0000000..61597c8
--- /dev/null
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "qca955x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       compatible = "compex,wpj558-16m", "qca,qca9558";
+       model = "Compex WPJ558 (16MB flash)";
+
+       aliases {
+               label-mac-device = &eth0;
+               led-boot = &led_sig4;
+               led-failsafe = &led_sig4;
+               led-running = &led_sig4;
+               led-upgrade = &led_sig4;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               sig1 {
+                       label = "red:sig1";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+
+               sig2 {
+                       label = "yellow:sig2";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+
+               sig3 {
+                       label = "green:sig3";
+                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+               };
+
+               led_sig4: sig4 {
+                       label = "green:sig4";
+                       gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "Reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       beeper {
+               compatible = "gpio-beeper";
+               gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&spi {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <50000000>;
+               m25p,fast-read;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       uboot: partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x030000>;
+                               read-only;
+                       };
+
+                       firmware@30000 {
+                               compatible = "denx,uimage";
+                               label = "firmware";
+                               reg = <0x030000 0xfc0000>;
+                       };
+
+                       art: partition@ff0000 {
+                               label = "art";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+
+               qca,ar8327-initvals = <
+                       0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+                       0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+                       0x50 0xcc35cc35 /* LED_CTRL0 */
+                       0x54 0x00000000 /* LED_CTRL1 */
+                       0x58 0x00000000 /* LED_CTRL2 */
+                       0x5c 0x03ffff00 /* LED_CTRL3 */
+                       0x7c 0x0000007e /* PORT0_STATUS */
+                       0x94 0x0000007e /* PORT6 STATUS */
+               >;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       pll-data = <0x56000000 0x00000101 0x00001616>;
+       phy-handle = <&phy0>;
+
+       nvmem-cells = <&macaddr_uboot_2e010>;
+       nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+       status = "okay";
+
+       mtd-cal-data = <&art 0x1000>;
+};
+
+&pcie0 {
+       status = "okay";
+};
+
+&uboot {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_uboot_2e010: macaddr@2e010 {
+               reg = <0x2e010 0x6>;
+       };
+};
index d37fa4ba2b32758e2f340f7c91e3fab19581f99d..e45d1aa73a3a167076b0e486ae825ad082858b80 100644 (file)
@@ -221,6 +221,10 @@ ath79_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "0@eth0" "3:lan" "2:wan"
                ;;
                ucidef_add_switch "switch0" \
                        "0@eth0" "3:lan" "2:wan"
                ;;
+       compex,wpj558-16m)
+               ucidef_add_switch "switch0" \
+                       "1:wan" "5:lan" "6@eth0"
+               ;;
        devolo,dlan-pro-1200plus-ac|\
        devolo,magic-2-wifi)
                ucidef_add_switch "switch0" \
        devolo,dlan-pro-1200plus-ac|\
        devolo,magic-2-wifi)
                ucidef_add_switch "switch0" \
@@ -528,6 +532,7 @@ ath79_setup_macs()
                wan_mac=$(macaddr_add $(mtd_get_mac_binary art 0x0) 1)
                ;;
        compex,wpj344-16m|\
                wan_mac=$(macaddr_add $(mtd_get_mac_binary art 0x0) 1)
                ;;
        compex,wpj344-16m|\
+       compex,wpj558-16m|\
        compex,wpj563)
                wan_mac=$(mtd_get_mac_binary u-boot 0x2e018)
                ;;
        compex,wpj563)
                wan_mac=$(mtd_get_mac_binary u-boot 0x2e018)
                ;;
index 4b943ba282c58785e7ad2874375384172c55766f..5bcd4779d38ddcad3763681ccaad79f37440bfe2 100644 (file)
@@ -682,6 +682,20 @@ define Device/compex_wpj531-16m
 endef
 TARGET_DEVICES += compex_wpj531-16m
 
 endef
 TARGET_DEVICES += compex_wpj531-16m
 
+define Device/compex_wpj558-16m
+  SOC := qca9558
+  IMAGE_SIZE := 16128k
+  DEVICE_VENDOR := Compex
+  DEVICE_MODEL := WPJ558
+  DEVICE_VARIANT := 16M
+  SUPPORTED_DEVICES += wpj558
+  IMAGES += cpximg-6a07.bin
+  IMAGE/cpximg-6a07.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+       append-rootfs | pad-rootfs | mkmylofw_16m 0x691 3
+  DEVICE_PACKAGES := kmod-gpio-beeper
+endef
+TARGET_DEVICES += compex_wpj558-16m
+
 define Device/compex_wpj563
   SOC := qca9563
   DEVICE_PACKAGES := kmod-usb2 kmod-usb3
 define Device/compex_wpj563
   SOC := qca9563
   DEVICE_PACKAGES := kmod-usb2 kmod-usb3