/*
- * linux/drivers/serial/hornet_serial.c
+ * Atheros AR933X SoC built-in UART driver
*
- * Driver for hornet serial ports
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
*
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
*
- * Copyright (C) 2010 Ryan Hsu.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * $Id$
- *
- * A note about mapbase / membase
- *
- * mapbase is the physical address of the IO port.
- * membase is an 'ioremapped' cookie.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
*/
#include <linux/module.h>
-#include <linux/moduleparam.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
-#include <linux/serial_reg.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/nmi.h>
-#include <linux/mutex.h>
#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/irq.h>
#include <asm/mach-ar71xx/ar933x_uart.h>
#include <asm/mach-ar71xx/ar933x_uart_platform.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include "8250.h"
-#define ar7240_reg_rmw_clear(_reg, _val) do {} while (0)
-
#define DRIVER_NAME "ar933x-uart"
-#define AR933X_UART_REGS_SIZE 20
-#define AR933X_UART_FIFO_SIZE 16
-
-/*
- * uncomment below to enable WAR for EV81847.
- */
-//#define AR933X_EV81847_WAR
+#define AR933X_DUMMY_STATUS_RD 0x01
static struct uart_driver ar933x_uart_driver;
-/*
- * Debugging.
- */
-#if 0
-#define DEBUG_AUTOCONF(fmt...) printk(fmt)
-#else
-#define DEBUG_AUTOCONF(fmt...) do { } while (0)
-#endif
-
-#if 0
-#define DEBUG_INTR(fmt...) printk(fmt)
-#else
-#define DEBUG_INTR(fmt...) do { } while (0)
-#endif
-
-/*
- * We default to IRQ0 for the "no irq" hack. Some
- * machine types want others as well - they're free
- * to redefine this in their header file.
- */
-#define is_real_interrupt(irq) ((irq) != 0)
-
-#include <asm/serial.h>
-
struct ar933x_uart_port {
struct uart_port port;
- struct timer_list timer; /* "no irq" timer */
- unsigned char acr;
- unsigned char ier;
- unsigned char lcr;
- unsigned char mcr;
+ unsigned int ier; /* shadow Interrupt Enable Register */
};
-static inline int ar933x_ev81847_war(void)
-{
-#if defined(AR933X_EV81847_WAR)
- return 1;
-#else
- return 0;
-#endif
-}
-
static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
int offset)
{
static inline void ar933x_uart_start_tx_interrupt(struct ar933x_uart_port *up)
{
- ar933x_uart_rmw_set(up, AR933X_UART_INT_EN_REG,
- AR933X_UART_INT_TX_EMPTY);
+ up->ier |= AR933X_UART_INT_TX_EMPTY;
+ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
}
static inline void ar933x_uart_stop_tx_interrupt(struct ar933x_uart_port *up)
{
- if (up->ier & UART_IER_THRI) {
- up->ier &= ~UART_IER_THRI;
+ up->ier &= ~AR933X_UART_INT_TX_EMPTY;
+ ar933x_uart_write(up, AR933X_UART_INT_EN_REG,up->ier);
+}
- /* FIXME: why this uses RXVALIDINTEN? */
- ar933x_uart_rmw_clear(up, AR933X_UART_INT_EN_REG,
- AR933X_UART_INT_RX_VALID);
- }
+static inline void ar933x_uart_putc(struct ar933x_uart_port *up, int ch)
+{
+ unsigned int rdata;
+
+ rdata = ch & AR933X_UART_DATA_TX_RX_MASK;
+ rdata |= AR933X_UART_DATA_TX_CSR;
+ ar933x_uart_write(up, AR933X_UART_DATA_REG, rdata);
}
static unsigned int ar933x_uart_tx_empty(struct uart_port *port)
{
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
- up->ier &= ~UART_IER_RLSI;
- up->port.read_status_mask &= ~UART_LSR_DR;
-
- ar933x_uart_rmw_clear(up, AR933X_UART_INT_EN_REG,
- AR933X_UART_INT_RX_VALID);
+ up->ier &= ~AR933X_UART_INT_RX_VALID;
+ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
}
static void ar933x_uart_break_ctl(struct uart_port *port, int break_state)
{
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
unsigned long flags;
- unsigned long rdata;
spin_lock_irqsave(&up->port.lock, flags);
-
if (break_state == -1)
- up->lcr |= UART_LCR_SBC;
- else
- up->lcr &= ~UART_LCR_SBC;
-
- rdata = ar933x_uart_read(up, AR933X_UART_CS_REG);
- if (up->lcr & UART_LCR_SBC)
- rdata |= AR933X_UART_CS_TX_BREAK;
+ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_TX_BREAK);
else
- rdata &= ~AR933X_UART_CS_TX_BREAK;
-
- ar933x_uart_write(up, AR933X_UART_CS_REG, rdata);
-
+ ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
+ AR933X_UART_CS_TX_BREAK);
spin_unlock_irqrestore(&up->port.lock, flags);
}
{
}
-static inline unsigned int ar933x_uart_get_divisor(struct uart_port *port,
- unsigned int baud)
-{
- return (port->uartclk / (16 * baud)) - 1;
-}
-
static void ar933x_uart_set_termios(struct uart_port *port,
- struct ktermios *termios,
+ struct ktermios *new,
struct ktermios *old)
{
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
- unsigned char cval;
+ unsigned int cs;
unsigned long flags;
- unsigned int baud, quot;
-
- switch (termios->c_cflag & CSIZE) {
- case CS5:
- cval = UART_LCR_WLEN5;
- break;
- case CS6:
- cval = UART_LCR_WLEN6;
- break;
- case CS7:
- cval = UART_LCR_WLEN7;
- break;
- default:
- case CS8:
- cval = UART_LCR_WLEN8;
- break;
- }
+ unsigned int baud, scale;
- if (termios->c_cflag & CSTOPB)
- cval |= UART_LCR_STOP;
- if (termios->c_cflag & PARENB)
- cval |= UART_LCR_PARITY;
- if (!(termios->c_cflag & PARODD))
- cval |= UART_LCR_EPAR;
-#ifdef CMSPAR
- if (termios->c_cflag & CMSPAR)
- cval |= UART_LCR_SPAR;
-#endif
+ /* Only CS8 is supported */
+ new->c_cflag &= ~CSIZE;
+ new->c_cflag |= CS8;
- /*
- * Ask the core to calculate the divisor for us.
- */
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
- quot = ar933x_uart_get_divisor(port, baud);
+ /* Only one stop bit is supported */
+ new->c_cflag &= ~CSTOPB;
-#if 0
- if (up->capabilities & UART_CAP_FIFO && up->port.fifosize > 1) {
- if (baud < 2400)
- fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
+ cs = 0;
+ if (new->c_cflag & PARENB) {
+ if (!(new->c_cflag & PARODD))
+ cs |= AR933X_UART_CS_PARITY_EVEN;
else
- fcr = uart_config[up->port.type].fcr;
+ cs |= AR933X_UART_CS_PARITY_ODD;
+ } else {
+ cs |= AR933X_UART_CS_PARITY_NONE;
}
- /*
- * MCR-based auto flow control. When AFE is enabled, RTS will be
- * deasserted when the receive FIFO contains more characters than
- * the trigger, or the MCR RTS bit is cleared. In the case where
- * the remote UART is not using CTS auto flow control, we must
- * have sufficient FIFO entries for the latency of the remote
- * UART to respond. IOW, at least 32 bytes of FIFO.
- */
- if (up->capabilities & UART_CAP_AFE && up->port.fifosize >= 32) {
- up->mcr &= ~UART_MCR_AFE;
- if (termios->c_cflag & CRTSCTS)
- up->mcr |= UART_MCR_AFE;
- }
-#endif
+ /* Mark/space parity is not supported */
+ new->c_cflag &= ~CMSPAR;
+
+ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+ scale = (port->uartclk / (16 * baud)) - 1;
/*
- * Ok, we're now changing the port state. Do it with
+ * Ok, we're now changing the port state. Do it with
* interrupts disabled.
*/
spin_lock_irqsave(&up->port.lock, flags);
- /*
- * Update the per-port timeout.
- */
- uart_update_timeout(port, termios->c_cflag, baud);
+ /* Update the per-port timeout. */
+ uart_update_timeout(port, new->c_cflag, baud);
- up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
- if (termios->c_iflag & INPCK)
- up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
- if (termios->c_iflag & (BRKINT | PARMRK))
- up->port.read_status_mask |= UART_LSR_BI;
-
- /*
- * Characteres to ignore
- */
up->port.ignore_status_mask = 0;
- if (termios->c_iflag & IGNPAR)
- up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
- if (termios->c_iflag & IGNBRK) {
- up->port.ignore_status_mask |= UART_LSR_BI;
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (termios->c_iflag & IGNPAR)
- up->port.ignore_status_mask |= UART_LSR_OE;
- }
- /*
- * ignore all characters if CREAD is not set
- */
- if ((termios->c_cflag & CREAD) == 0)
- up->port.ignore_status_mask |= UART_LSR_DR;
+ /* ignore all characters if CREAD is not set */
+ if ((new->c_cflag & CREAD) == 0)
+ up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD;
- /*
- * CTS flow control flag and modem status interrupts
- */
- up->ier &= ~UART_IER_MSI;
- if (UART_ENABLE_MS(&up->port, termios->c_cflag))
- up->ier |= UART_IER_MSI;
+ ar933x_uart_write(up, AR933X_UART_CLOCK_REG,
+ scale << AR933X_UART_CLOCK_SCALE_S | 8192);
+
+ /* setup configuration register */
+ ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs);
+ /* enable host interrupt */
ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
AR933X_UART_CS_HOST_INT_EN);
- /* Save LCR */
- up->lcr = cval;
-
- ar933x_uart_set_mctrl(&up->port, up->port.mctrl);
spin_unlock_irqrestore(&up->port.lock, flags);
+
+ if (tty_termios_baud_rate(new))
+ tty_termios_encode_baud_rate(new, baud, baud);
}
-static void ar933x_uart_rx_chars(struct ar933x_uart_port *up, int *status)
+static void ar933x_uart_rx_chars(struct ar933x_uart_port *up)
{
struct tty_struct *tty = up->port.state->port.tty;
- unsigned int lsr = *status;
- unsigned char ch;
int max_count = 256;
- char flag;
do {
- ch = lsr & AR933X_UART_DATA_TX_RX_MASK;
+ unsigned int rdata;
+ unsigned char ch;
- flag = TTY_NORMAL;
- up->port.icount.rx++;
+ rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
+ if ((rdata & AR933X_UART_DATA_RX_CSR) == 0)
+ break;
- lsr = AR933X_UART_DATA_RX_CSR;
- ar933x_uart_write(up, AR933X_UART_DATA_REG, lsr);
-
- if (unlikely(lsr & (UART_LSR_BI | UART_LSR_PE |
- UART_LSR_FE | UART_LSR_OE))) {
- /*
- * For statistics only
- */
- if (lsr & UART_LSR_BI) {
- lsr &= ~(UART_LSR_FE | UART_LSR_PE);
- up->port.icount.brk++;
- /*
- * We do the SysRQ and SAK checking
- * here because otherwise the break
- * may get masked by ignore_status_mask
- * or read_status_mask.
- */
- if (uart_handle_break(&up->port))
- goto ignore_char;
- } else if (lsr & UART_LSR_PE)
- up->port.icount.parity++;
- else if (lsr & UART_LSR_FE)
- up->port.icount.frame++;
- if (lsr & UART_LSR_OE)
- up->port.icount.overrun++;
-
- /*
- * Mask off conditions which should be ignored.
- */
- lsr &= up->port.read_status_mask;
-
- if (lsr & UART_LSR_BI) {
- DEBUG_INTR("handling break....");
- flag = TTY_BREAK;
- } else if (lsr & UART_LSR_PE)
- flag = TTY_PARITY;
- else if (lsr & UART_LSR_FE)
- flag = TTY_FRAME;
- }
+ /* remove the character from the FIFO */
+ ar933x_uart_write(up, AR933X_UART_DATA_REG,
+ AR933X_UART_DATA_RX_CSR);
- if (uart_handle_sysrq_char(&up->port, ch))
- goto ignore_char;
+ up->port.icount.rx++;
+ ch = rdata & AR933X_UART_DATA_TX_RX_MASK;
- uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
+ if (uart_handle_sysrq_char(&up->port, ch))
+ continue;
-ignore_char:
- lsr = ar933x_uart_read(up, AR933X_UART_DATA_REG);
- } while ((lsr & AR933X_UART_DATA_RX_CSR) && (max_count-- > 0));
+ if ((up->port.ignore_status_mask & AR933X_DUMMY_STATUS_RD) == 0)
+ tty_insert_flip_char(tty, ch, TTY_NORMAL);
+ } while (max_count-- > 0);
- spin_unlock(&up->port.lock);
tty_flip_buffer_push(tty);
- spin_lock(&up->port.lock);
-
- *status = lsr;
}
static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
{
struct circ_buf *xmit = &up->port.state->xmit;
int count;
- unsigned int rdata;
-
- rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
- if ((rdata & AR933X_UART_DATA_TX_CSR) == 0) {
- ar933x_uart_start_tx_interrupt(up);
- return;
- }
- if (up->port.x_char) {
- rdata = up->port.x_char & AR933X_UART_DATA_TX_RX_MASK;
- rdata |= AR933X_UART_DATA_TX_CSR;
- ar933x_uart_write(up, AR933X_UART_DATA_REG, rdata);
- up->port.icount.tx++;
- up->port.x_char = 0;
- ar933x_uart_start_tx_interrupt(up);
+ if (uart_tx_stopped(&up->port))
return;
- }
- if (uart_tx_stopped(&up->port)) {
- ar933x_uart_stop_tx(&up->port);
- return;
- }
-
- if (uart_circ_empty(xmit)) {
- ar933x_uart_stop_tx_interrupt(up);
- return;
- }
-
- count = up->port.fifosize / 4;
+ count = up->port.fifosize;
do {
+ unsigned int rdata;
+
rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
- if ((rdata & AR933X_UART_DATA_TX_CSR) == 0) {
- ar933x_uart_start_tx_interrupt(up);
- return;
+ if ((rdata & AR933X_UART_DATA_TX_CSR) == 0)
+ break;
+
+ if (up->port.x_char) {
+ ar933x_uart_putc(up, up->port.x_char);
+ up->port.icount.tx++;
+ up->port.x_char = 0;
+ continue;
}
- rdata = xmit->buf[xmit->tail] & AR933X_UART_DATA_TX_RX_MASK;
- rdata |= AR933X_UART_DATA_TX_CSR;
- ar933x_uart_write(up, AR933X_UART_DATA_REG, rdata);
+ if (uart_circ_empty(xmit))
+ break;
+
+ ar933x_uart_putc(up, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
up->port.icount.tx++;
- if (uart_circ_empty(xmit))
- break;
} while (--count > 0);
- rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG);
- if ((rdata & AR933X_UART_DATA_TX_CSR) == 0) {
- ar933x_uart_start_tx_interrupt(up);
- return;
- }
-
- /* Re-enable TX Empty Interrupt to transmit pending chars */
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
- ar933x_uart_start_tx_interrupt(up);
- }
- DEBUG_INTR("THRE...");
-
- if (uart_circ_empty(xmit))
- ar933x_uart_stop_tx_interrupt(up);
- else
+ if (!uart_circ_empty(xmit))
ar933x_uart_start_tx_interrupt(up);
}
-/*! Hornet's interrupt status is not read clear, so that we have to...
- * a. read out the interrupt status
- * b. clear the interrupt mask to reset the interrupt status
- * c. enable the interrupt to reactivate interrupt
- *
- * Disable and clear the interrupt status
- */
-static inline void ar933x_uart_clear_int(struct ar933x_uart_port *up)
-{
-#define BIT3 (0x1>>3)
-
- /* 1. clear MISC interrupt mask */
- //ar7240_reg_rmw_clear(AR7240_MISC_INT_MASK, BIT3);
-
- /* 2. clear uartcs hostinten mask, bit13 */
- ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
- AR933X_UART_CS_HOST_INT_EN);
-
- /* 3. clear rx uartint */
- ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_RX_VALID);
-
- /* 4. clear misc interrupt status */
- ar7240_reg_rmw_clear(AR7240_MISC_INT_STATUS, BIT3);
-
- /* 5. clear rx uartinten*/
- ar933x_uart_rmw_clear(up, AR933X_UART_INT_EN_REG,
- AR933X_UART_INT_RX_VALID);
-
- /* 6. enable rx int*/
- ar933x_uart_rmw_set(up, AR933X_UART_INT_EN_REG,
- AR933X_UART_INT_RX_VALID);
-
- /* 7. set uartcs hostinten mask */
- ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
- AR933X_UART_CS_HOST_INT_EN);
-
- /* 8. set misc int mask */
- //ar7240_reg_wr(AR7240_MISC_INT_MASK, BIT3);
-}
-
-static inline void ar933x_uart_handle_port(struct ar933x_uart_port *up)
+static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id)
{
+ struct ar933x_uart_port *up = dev_id;
unsigned int status;
- unsigned int int_status;
- unsigned int en_status;
- unsigned long flags;
- status = ar933x_uart_read(up, AR933X_UART_DATA_REG);
- int_status = ar933x_uart_read(up, AR933X_UART_INT_REG);
- en_status = ar933x_uart_read(up, AR933X_UART_INT_EN_REG);
+ status = ar933x_uart_read(up, AR933X_UART_CS_REG);
+ if ((status & AR933X_UART_CS_HOST_INT) == 0)
+ return IRQ_NONE;
- spin_lock_irqsave(&up->port.lock, flags);
+ spin_lock(&up->port.lock);
- if( (int_status & en_status) & AR933X_UART_INT_RX_VALID )
- ar933x_uart_rx_chars(up, &status);
+ status = ar933x_uart_read(up, AR933X_UART_INT_REG);
+ status &= ar933x_uart_read(up, AR933X_UART_INT_EN_REG);
- if (((int_status & en_status) & AR933X_UART_INT_TX_EMPTY)) {
- /* clear TX empty interrupts */
+ if (status & AR933X_UART_INT_RX_VALID) {
ar933x_uart_write(up, AR933X_UART_INT_REG,
- AR933X_UART_INT_TX_EMPTY);
-
- /* disable TX empty interrupts */
- ar933x_uart_rmw_clear(up, AR933X_UART_INT_EN_REG,
- AR933X_UART_INT_TX_EMPTY);
-
- if (!uart_circ_empty(&up->port.state->xmit))
- ar933x_uart_tx_chars(up);
+ AR933X_UART_INT_RX_VALID);
+ ar933x_uart_rx_chars(up);
}
- spin_unlock_irqrestore(&up->port.lock, flags);
-}
-
-static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id)
-{
- struct ar933x_uart_port *up;
- unsigned int iir;
-
- up = (struct ar933x_uart_port *) dev_id;
-
- iir = ar933x_uart_read(up, AR933X_UART_CS_REG);
- if ((iir & AR933X_UART_CS_HOST_INT) == 0)
- return IRQ_NONE;
-
- DEBUG_INTR("ar933x_uart_interrupt(%d)...", irq);
+ if (status & AR933X_UART_INT_TX_EMPTY) {
+ ar933x_uart_write(up, AR933X_UART_INT_REG,
+ AR933X_UART_INT_TX_EMPTY);
+ ar933x_uart_stop_tx_interrupt(up);
+ ar933x_uart_tx_chars(up);
+ }
- spin_lock(&up->port.lock);
- ar933x_uart_handle_port(up);
- ar933x_uart_clear_int(up);
spin_unlock(&up->port.lock);
- DEBUG_INTR("end.\n");
-
return IRQ_HANDLED;
}
-static void ar933x_uart_timer(unsigned long data)
-{
- struct uart_port *port = (void *)data;
- struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
- unsigned int iir;
-
- if (ar933x_ev81847_war()) {
- struct circ_buf *xmit = &up->port.state->xmit;
- unsigned long flags;
-
- if (!uart_circ_empty(xmit)) {
- spin_lock_irqsave(&up->port.lock, flags);
- ar933x_uart_tx_chars(up);
- spin_unlock_irqrestore(&up->port.lock, flags);
- }
- } else {
- iir = ar933x_uart_read(up, AR933X_UART_CS_REG);
- if (iir & AR933X_UART_CS_HOST_INT) {
- spin_lock(&up->port.lock);
- ar933x_uart_handle_port(up);
- spin_unlock(&up->port.lock);
- }
- }
-
- mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
-}
-
static int ar933x_uart_startup(struct uart_port *port)
{
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
if (ret)
return ret;
- up->mcr = 0;
-
- /*
- * Clear the interrupt registers.
- */
- ar933x_uart_read(up, AR933X_UART_CS_REG);
- ar933x_uart_read(up, AR933X_UART_INT_REG);
-
- if (!is_real_interrupt(up->port.irq) || ar933x_ev81847_war()) {
- setup_timer(&up->timer, ar933x_uart_timer, (unsigned long)port);
- mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
- return 0;
- }
-
spin_lock_irqsave(&up->port.lock, flags);
- /*
- * Enable host interrupts
- */
+ /* Enable HOST interrupts */
ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
AR933X_UART_CS_HOST_INT_EN);
- /*
- * Enable RX interrupts
- */
- up->ier = UART_IER_RLSI | UART_IER_RDI;
- ar933x_uart_write(up, AR933X_UART_INT_EN_REG,
- AR933X_UART_INT_RX_VALID);
-
- /*
- * And clear the interrupt registers again for luck.
- */
- ar933x_uart_read(up, AR933X_UART_INT_REG);
+ /* Enable RX interrupts */
+ up->ier = AR933X_UART_INT_RX_VALID;
+ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
spin_unlock_irqrestore(&up->port.lock, flags);
static void ar933x_uart_shutdown(struct uart_port *port)
{
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
- unsigned long flags;
- /*
- * Disable all interrupts from this port
- */
+ /* Disable all interrupts */
up->ier = 0;
- ar933x_uart_write(up, AR933X_UART_INT_EN_REG, 0);
-
- spin_lock_irqsave(&up->port.lock, flags);
- up->port.mctrl &= ~TIOCM_OUT2;
- ar933x_uart_set_mctrl(&up->port, up->port.mctrl);
- spin_unlock_irqrestore(&up->port.lock, flags);
+ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
- /*
- * Disable break condition
- */
+ /* Disable break condition */
ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG,
AR933X_UART_CS_TX_BREAK);
- if (!is_real_interrupt(up->port.irq) ||
- ar933x_ev81847_war())
- del_timer_sync(&up->timer);
-
free_irq(up->port.irq, up);
}
static void ar933x_uart_config_port(struct uart_port *port, int flags)
{
- struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
-
- port->type = PORT_AR933X;
-
- /* Clear mask, so no surprise interrupts. */
- ar933x_uart_read(up, AR933X_UART_CS_REG);
- /* Clear interrupts status register */
- ar933x_uart_read(up, AR933X_UART_INT_REG);
+ if (flags & UART_CONFIG_TYPE)
+ port->type = PORT_AR933X;
}
static int ar933x_uart_verify_port(struct uart_port *port,
struct serial_struct *ser)
{
- return -EINVAL;
+ if (ser->type != PORT_UNKNOWN &&
+ ser->type != PORT_AR933X)
+ return -EINVAL;
+
+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ return -EINVAL;
+
+ if (ser->baud_base < 28800)
+ return -EINVAL;
+
+ return 0;
}
static struct uart_ops ar933x_uart_ops = {
static void ar933x_uart_console_putchar(struct uart_port *port, int ch)
{
struct ar933x_uart_port *up = (struct ar933x_uart_port *) port;
- unsigned int rdata;
ar933x_uart_wait_xmitr(up);
-
- rdata = ch & AR933X_UART_DATA_TX_RX_MASK;
- rdata |= AR933X_UART_DATA_TX_CSR;
- ar933x_uart_write(up, AR933X_UART_DATA_REG, rdata);
+ ar933x_uart_putc(up, ch);
}
static void ar933x_uart_console_write(struct console *co, const char *s,
{
struct ar933x_uart_port *up = ar933x_console_ports[co->index];
unsigned long flags;
- unsigned int ier;
+ unsigned int int_en;
int locked = 1;
local_irq_save(flags);
- if (up->port.sysrq) {
+ if (up->port.sysrq)
locked = 0;
- } else if (oops_in_progress) {
+ else if (oops_in_progress)
locked = spin_trylock(&up->port.lock);
- } else
+ else
spin_lock(&up->port.lock);
/*
* First save the IER then disable the interrupts
*/
- ier = ar933x_uart_read(up, AR933X_UART_INT_EN_REG);
+ int_en = ar933x_uart_read(up, AR933X_UART_INT_EN_REG);
ar933x_uart_write(up, AR933X_UART_INT_EN_REG, 0);
uart_console_write(&up->port, s, count, ar933x_uart_console_putchar);
* and restore the IER
*/
ar933x_uart_wait_xmitr(up);
+ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, int_en);
- ar933x_uart_write(up, AR933X_UART_INT_EN_REG, ier);
ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_ALLINTS);
if (locked)
.data = &ar933x_uart_driver,
};
-static int __init ar933x_uart_console_init(void)
-{
- register_console(&ar933x_uart_console);
- return 0;
-}
-console_initcall(ar933x_uart_console_init);
-
static void ar933x_uart_add_console_port(struct ar933x_uart_port *up)
{
ar933x_console_ports[up->port.line] = up;
MODULE_DESCRIPTION("Atheros AR933X UART driver");
MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);
projects / openwrt / openwrt.git / commitdiff