+++ /dev/null
-From 0068a89747e7c1d9a0bbb7282a34382a4274638a Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 14 Apr 2017 16:41:55 +0100
-Subject: [PATCH] sfp: provide netdev sfp_bus and use for start/stop
-
-Add a netdev sfp_bus pointer for propagating the phylink start/stop
-actions to the SFP cage: the SFP cage may not be directly connected to
-phylink, but may be the other side of a fixed PHY, and SFP needs to
-know when the netdev is brought up or taken down.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -949,8 +949,8 @@ void phylink_start(struct phylink *pl)
-
- if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
- mod_timer(&pl->link_poll, jiffies + HZ);
-- if (pl->sfp_bus)
-- sfp_upstream_start(pl->sfp_bus);
-+ if (pl->netdev->sfp_bus)
-+ sfp_upstream_start(pl->netdev->sfp_bus);
- if (pl->phydev)
- phy_start(pl->phydev);
- }
-@@ -971,8 +971,8 @@ void phylink_stop(struct phylink *pl)
-
- if (pl->phydev)
- phy_stop(pl->phydev);
-- if (pl->sfp_bus)
-- sfp_upstream_stop(pl->sfp_bus);
-+ if (pl->netdev->sfp_bus)
-+ sfp_upstream_stop(pl->netdev->sfp_bus);
- if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
- del_timer_sync(&pl->link_poll);
-
+++ /dev/null
-From 5f3ac54810055fec0cc667bb04c16f783830abff Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 14 Apr 2017 14:21:25 +0100
-Subject: [PATCH] net: phy: marvell10g: add SFP+ support
-
-Add support for SFP+ cages to the Marvell 10G PHY driver. This is
-slightly complicated by the way phylib works in that we need to use
-a multi-step process to attach the SFP bus, and we also need to track
-the phylink state machine to know when the module's transmit disable
-signal should change state.
-
-With appropriate DT changes, this allows the SFP+ canges on the
-Macchiatobin platform to be functional.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/marvell10g.c | 80 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 80 insertions(+)
-
---- a/drivers/net/phy/marvell10g.c
-+++ b/drivers/net/phy/marvell10g.c
-@@ -25,6 +25,8 @@
- #include <linux/hwmon.h>
- #include <linux/marvell_phy.h>
- #include <linux/phy.h>
-+#include <linux/property.h>
-+#include <linux/sfp.h>
-
- enum {
- MV_PMA_BOOT = 0xc050,
-@@ -56,6 +58,11 @@ enum {
- };
-
- struct mv3310_priv {
-+ struct fwnode_handle *sfp_fwnode;
-+ struct sfp_bus *sfp_bus;
-+ enum phy_state state;
-+ bool running;
-+
- struct device *hwmon_dev;
- char *hwmon_name;
- };
-@@ -219,6 +226,27 @@ static int mv3310_hwmon_probe(struct phy
- }
- #endif
-
-+static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
-+{
-+ struct phy_device *phydev = upstream;
-+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
-+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
-+ phy_interface_t iface;
-+
-+ sfp_parse_support(priv->sfp_bus, id, support);
-+ iface = sfp_select_interface(priv->sfp_bus, id, support);
-+
-+ if (iface != PHY_INTERFACE_MODE_10GKR) {
-+ dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
-+ return -EINVAL;
-+ }
-+ return 0;
-+}
-+
-+static const struct sfp_upstream_ops mv3310_sfp_ops = {
-+ .module_insert = mv3310_sfp_insert,
-+};
-+
- static int mv3310_probe(struct phy_device *phydev)
- {
- struct mv3310_priv *priv;
-@@ -249,9 +277,30 @@ static int mv3310_probe(struct phy_devic
- if (ret)
- return ret;
-
-+ if (phydev->mdio.dev.fwnode) {
-+ struct fwnode_reference_args ref;
-+ int ret;
-+
-+ ret = fwnode_property_get_reference_args(phydev->mdio.dev.fwnode,
-+ "sfp", NULL, 0, 0,
-+ &ref);
-+ if (ret == 0)
-+ priv->sfp_fwnode = ref.fwnode;
-+ }
-+
- return 0;
- }
-
-+static void mv3310_remove(struct phy_device *phydev)
-+{
-+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
-+
-+ if (priv->sfp_bus)
-+ sfp_unregister_upstream(priv->sfp_bus);
-+
-+ fwnode_handle_put(priv->sfp_fwnode);
-+}
-+
- static int mv3310_suspend(struct phy_device *phydev)
- {
- return 0;
-@@ -262,8 +311,29 @@ static int mv3310_resume(struct phy_devi
- return mv3310_hwmon_config(phydev, true);
- }
-
-+static void mv3310_link_change_notify(struct phy_device *phydev)
-+{
-+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
-+ enum phy_state state = phydev->state;
-+ bool running;
-+
-+ if (priv->sfp_bus && priv->state != state) {
-+ priv->state = state;
-+
-+ running = state >= PHY_UP && state < PHY_HALTED;
-+ if (priv->running != running) {
-+ priv->running = running;
-+ if (running)
-+ sfp_upstream_start(priv->sfp_bus);
-+ else
-+ sfp_upstream_stop(priv->sfp_bus);
-+ }
-+ }
-+}
-+
- static int mv3310_config_init(struct phy_device *phydev)
- {
-+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
- __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
- u32 mask;
- int val;
-@@ -357,6 +427,14 @@ static int mv3310_config_init(struct phy
- phydev->supported &= mask;
- phydev->advertising &= phydev->supported;
-
-+ /* Would be nice to do this in the probe function, but unfortunately,
-+ * phylib doesn't have phydev->attached_dev set there.
-+ */
-+ if (priv->sfp_fwnode && !priv->sfp_bus)
-+ priv->sfp_bus = sfp_register_upstream(priv->sfp_fwnode,
-+ phydev->attached_dev,
-+ phydev, &mv3310_sfp_ops);
-+
- return 0;
- }
-
-@@ -566,6 +644,8 @@ static struct phy_driver mv3310_drivers[
- .config_aneg = mv3310_config_aneg,
- .aneg_done = mv3310_aneg_done,
- .read_status = mv3310_read_status,
-+ .remove = mv3310_remove,
-+ .link_change_notify = mv3310_link_change_notify,
- },
- };
-
+++ /dev/null
-From 7e8bf5227f87601d8d74948bcae8846d2bdd6995 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 14 Apr 2017 20:17:13 +0100
-Subject: [PATCH] sfp: add sfp+ compatible
-
-Add a compatible for SFP+ cages. SFP+ cages are backwards compatible,
-but the ethernet device behind them may not support the slower speeds
-of SFP modules.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -230,6 +230,7 @@ static const struct sff_data sfp_data =
- static const struct of_device_id sfp_of_match[] = {
- { .compatible = "sff,sff", .data = &sff_data, },
- { .compatible = "sff,sfp", .data = &sfp_data, },
-+ { .compatible = "sff,sfp+", .data = &sfp_data, },
- { },
- };
- MODULE_DEVICE_TABLE(of, sfp_of_match);
+++ /dev/null
-From 4ce55fb01c473bf1ad2048f8b4db62dca392e6d2 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Sun, 13 Sep 2015 01:06:31 +0100
-Subject: [PATCH] sfp: display SFP module information
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- drivers/net/phy/sfp.c | 261 +++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 258 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1132,6 +1132,184 @@ static void sfp_hwmon_remove(struct sfp
- }
- #endif
-
-+static const char *sfp_link_len(char *buf, size_t size, unsigned int length,
-+ unsigned int multiplier)
-+{
-+ if (length == 0)
-+ return "unsupported/unspecified";
-+
-+ if (length == 255) {
-+ *buf++ = '>';
-+ size -= 1;
-+ length -= 1;
-+ }
-+
-+ length *= multiplier;
-+
-+ if (length >= 1000)
-+ snprintf(buf, size, "%u.%0*ukm",
-+ length / 1000,
-+ multiplier > 100 ? 1 :
-+ multiplier > 10 ? 2 : 3,
-+ length % 1000);
-+ else
-+ snprintf(buf, size, "%um", length);
-+
-+ return buf;
-+}
-+
-+struct bitfield {
-+ unsigned int mask;
-+ unsigned int val;
-+ const char *str;
-+};
-+
-+static const struct bitfield sfp_options[] = {
-+ {
-+ .mask = SFP_OPTIONS_HIGH_POWER_LEVEL,
-+ .val = SFP_OPTIONS_HIGH_POWER_LEVEL,
-+ .str = "hpl",
-+ }, {
-+ .mask = SFP_OPTIONS_PAGING_A2,
-+ .val = SFP_OPTIONS_PAGING_A2,
-+ .str = "paginga2",
-+ }, {
-+ .mask = SFP_OPTIONS_RETIMER,
-+ .val = SFP_OPTIONS_RETIMER,
-+ .str = "retimer",
-+ }, {
-+ .mask = SFP_OPTIONS_COOLED_XCVR,
-+ .val = SFP_OPTIONS_COOLED_XCVR,
-+ .str = "cooled",
-+ }, {
-+ .mask = SFP_OPTIONS_POWER_DECL,
-+ .val = SFP_OPTIONS_POWER_DECL,
-+ .str = "powerdecl",
-+ }, {
-+ .mask = SFP_OPTIONS_RX_LINEAR_OUT,
-+ .val = SFP_OPTIONS_RX_LINEAR_OUT,
-+ .str = "rxlinear",
-+ }, {
-+ .mask = SFP_OPTIONS_RX_DECISION_THRESH,
-+ .val = SFP_OPTIONS_RX_DECISION_THRESH,
-+ .str = "rxthresh",
-+ }, {
-+ .mask = SFP_OPTIONS_TUNABLE_TX,
-+ .val = SFP_OPTIONS_TUNABLE_TX,
-+ .str = "tunabletx",
-+ }, {
-+ .mask = SFP_OPTIONS_RATE_SELECT,
-+ .val = SFP_OPTIONS_RATE_SELECT,
-+ .str = "ratesel",
-+ }, {
-+ .mask = SFP_OPTIONS_TX_DISABLE,
-+ .val = SFP_OPTIONS_TX_DISABLE,
-+ .str = "txdisable",
-+ }, {
-+ .mask = SFP_OPTIONS_TX_FAULT,
-+ .val = SFP_OPTIONS_TX_FAULT,
-+ .str = "txfault",
-+ }, {
-+ .mask = SFP_OPTIONS_LOS_INVERTED,
-+ .val = SFP_OPTIONS_LOS_INVERTED,
-+ .str = "los-",
-+ }, {
-+ .mask = SFP_OPTIONS_LOS_NORMAL,
-+ .val = SFP_OPTIONS_LOS_NORMAL,
-+ .str = "los+",
-+ }, { }
-+};
-+
-+static const struct bitfield diagmon[] = {
-+ {
-+ .mask = SFP_DIAGMON_DDM,
-+ .val = SFP_DIAGMON_DDM,
-+ .str = "ddm",
-+ }, {
-+ .mask = SFP_DIAGMON_INT_CAL,
-+ .val = SFP_DIAGMON_INT_CAL,
-+ .str = "intcal",
-+ }, {
-+ .mask = SFP_DIAGMON_EXT_CAL,
-+ .val = SFP_DIAGMON_EXT_CAL,
-+ .str = "extcal",
-+ }, {
-+ .mask = SFP_DIAGMON_RXPWR_AVG,
-+ .val = SFP_DIAGMON_RXPWR_AVG,
-+ .str = "rxpwravg",
-+ }, { }
-+};
-+
-+static const char *sfp_bitfield(char *out, size_t outsz, const struct bitfield *bits, unsigned int val)
-+{
-+ char *p = out;
-+ int n;
-+
-+ *p = '\0';
-+ while (bits->mask) {
-+ if ((val & bits->mask) == bits->val) {
-+ n = snprintf(p, outsz, "%s%s",
-+ out != p ? ", " : "",
-+ bits->str);
-+ if (n == outsz)
-+ break;
-+ p += n;
-+ outsz -= n;
-+ }
-+ bits++;
-+ }
-+
-+ return out;
-+}
-+
-+static const char *sfp_connector(unsigned int connector)
-+{
-+ switch (connector) {
-+ case SFP_CONNECTOR_UNSPEC:
-+ return "unknown/unspecified";
-+ case SFP_CONNECTOR_SC:
-+ return "SC";
-+ case SFP_CONNECTOR_FIBERJACK:
-+ return "Fiberjack";
-+ case SFP_CONNECTOR_LC:
-+ return "LC";
-+ case SFP_CONNECTOR_MT_RJ:
-+ return "MT-RJ";
-+ case SFP_CONNECTOR_MU:
-+ return "MU";
-+ case SFP_CONNECTOR_SG:
-+ return "SG";
-+ case SFP_CONNECTOR_OPTICAL_PIGTAIL:
-+ return "Optical pigtail";
-+ case SFP_CONNECTOR_HSSDC_II:
-+ return "HSSDC II";
-+ case SFP_CONNECTOR_COPPER_PIGTAIL:
-+ return "Copper pigtail";
-+ default:
-+ return "unknown";
-+ }
-+}
-+
-+static const char *sfp_encoding(unsigned int encoding)
-+{
-+ switch (encoding) {
-+ case SFP_ENCODING_UNSPEC:
-+ return "unspecified";
-+ case SFP_ENCODING_8472_64B66B:
-+ return "64b66b";
-+ case SFP_ENCODING_8B10B:
-+ return "8b10b";
-+ case SFP_ENCODING_4B5B:
-+ return "4b5b";
-+ case SFP_ENCODING_NRZ:
-+ return "NRZ";
-+ case SFP_ENCODING_8472_MANCHESTER:
-+ return "MANCHESTER";
-+ default:
-+ return "unknown";
-+ }
-+}
-+
- /* Helpers */
- static void sfp_module_tx_disable(struct sfp *sfp)
- {
-@@ -1376,6 +1554,8 @@ static int sfp_sm_mod_probe(struct sfp *
- {
- /* SFP module inserted - read I2C data */
- struct sfp_eeprom_id id;
-+ char date[9];
-+ char options[80];
- bool cotsworks;
- u8 check;
- int ret;
-@@ -1432,12 +1612,87 @@ static int sfp_sm_mod_probe(struct sfp *
-
- sfp->id = id;
-
-- dev_info(sfp->dev, "module %.*s %.*s rev %.*s sn %.*s dc %.*s\n",
-+ date[0] = sfp->id.ext.datecode[4];
-+ date[1] = sfp->id.ext.datecode[5];
-+ date[2] = '-';
-+ date[3] = sfp->id.ext.datecode[2];
-+ date[4] = sfp->id.ext.datecode[3];
-+ date[5] = '-';
-+ date[6] = sfp->id.ext.datecode[0];
-+ date[7] = sfp->id.ext.datecode[1];
-+ date[8] = '\0';
-+
-+ dev_info(sfp->dev, "module %.*s %.*s rev %.*s sn %.*s dc %s\n",
- (int)sizeof(id.base.vendor_name), id.base.vendor_name,
- (int)sizeof(id.base.vendor_pn), id.base.vendor_pn,
- (int)sizeof(id.base.vendor_rev), id.base.vendor_rev,
-- (int)sizeof(id.ext.vendor_sn), id.ext.vendor_sn,
-- (int)sizeof(id.ext.datecode), id.ext.datecode);
-+ (int)sizeof(id.ext.vendor_sn), id.ext.vendor_sn, date);
-+ dev_info(sfp->dev, " %s connector, encoding %s, nominal bitrate %u.%uGbps +%u%% -%u%%\n",
-+ sfp_connector(sfp->id.base.connector),
-+ sfp_encoding(sfp->id.base.encoding),
-+ sfp->id.base.br_nominal / 10,
-+ sfp->id.base.br_nominal % 10,
-+ sfp->id.ext.br_max, sfp->id.ext.br_min);
-+ dev_info(sfp->dev, " 1000BaseSX%c 1000BaseLX%c 1000BaseCX%c 1000BaseT%c 100BaseLX%c 100BaseFX%c BaseBX10%c BasePX%c\n",
-+ sfp->id.base.e1000_base_sx ? '+' : '-',
-+ sfp->id.base.e1000_base_lx ? '+' : '-',
-+ sfp->id.base.e1000_base_cx ? '+' : '-',
-+ sfp->id.base.e1000_base_t ? '+' : '-',
-+ sfp->id.base.e100_base_lx ? '+' : '-',
-+ sfp->id.base.e100_base_fx ? '+' : '-',
-+ sfp->id.base.e_base_bx10 ? '+' : '-',
-+ sfp->id.base.e_base_px ? '+' : '-');
-+ dev_info(sfp->dev, " 10GBaseSR%c 10GBaseLR%c 10GBaseLRM%c 10GBaseER%c\n",
-+ sfp->id.base.e10g_base_sr ? '+' : '-',
-+ sfp->id.base.e10g_base_lr ? '+' : '-',
-+ sfp->id.base.e10g_base_lrm ? '+' : '-',
-+ sfp->id.base.e10g_base_er ? '+' : '-');
-+
-+ if (!sfp->id.base.sfp_ct_passive && !sfp->id.base.sfp_ct_active &&
-+ !sfp->id.base.e1000_base_t) {
-+ char len_9um[16], len_om[16];
-+
-+ dev_info(sfp->dev, " Wavelength %unm, fiber lengths:\n",
-+ be16_to_cpup(&sfp->id.base.optical_wavelength));
-+
-+ if (sfp->id.base.link_len[0] == 255)
-+ strcpy(len_9um, ">254km");
-+ else if (sfp->id.base.link_len[1] && sfp->id.base.link_len[1] != 255)
-+ sprintf(len_9um, "%um",
-+ sfp->id.base.link_len[1] * 100);
-+ else if (sfp->id.base.link_len[0])
-+ sprintf(len_9um, "%ukm", sfp->id.base.link_len[0]);
-+ else if (sfp->id.base.link_len[1] == 255)
-+ strcpy(len_9um, ">25.4km");
-+ else
-+ strcpy(len_9um, "unsupported");
-+
-+ dev_info(sfp->dev, " 9µm SM : %s\n", len_9um);
-+ dev_info(sfp->dev, " 62.5µm MM OM1: %s\n",
-+ sfp_link_len(len_om, sizeof(len_om),
-+ sfp->id.base.link_len[3], 10));
-+ dev_info(sfp->dev, " 50µm MM OM2: %s\n",
-+ sfp_link_len(len_om, sizeof(len_om),
-+ sfp->id.base.link_len[2], 10));
-+ dev_info(sfp->dev, " 50µm MM OM3: %s\n",
-+ sfp_link_len(len_om, sizeof(len_om),
-+ sfp->id.base.link_len[5], 10));
-+ dev_info(sfp->dev, " 50µm MM OM4: %s\n",
-+ sfp_link_len(len_om, sizeof(len_om),
-+ sfp->id.base.link_len[4], 10));
-+ } else {
-+ char len[16];
-+ dev_info(sfp->dev, " Copper length: %s\n",
-+ sfp_link_len(len, sizeof(len),
-+ sfp->id.base.link_len[4], 1));
-+ }
-+
-+ dev_info(sfp->dev, " Options: %s\n",
-+ sfp_bitfield(options, sizeof(options), sfp_options,
-+ be16_to_cpu(sfp->id.ext.options)));
-+ dev_info(sfp->dev, " Diagnostics: %s\n",
-+ sfp_bitfield(options, sizeof(options), diagmon,
-+ sfp->id.ext.diagmon));
-
- /* Check whether we support this module */
- if (!sfp->type->module_supported(&sfp->id)) {
+++ /dev/null
-From e26af2726067ff260b77485df6af8375b82bfb1d Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 23 Dec 2017 12:22:58 +0000
-Subject: [PATCH] sfp: more cotsworks fixes
-
-Cotsworks also gets the date code wrong.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 15 ++++++++-------
- 1 file changed, 8 insertions(+), 7 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1571,9 +1571,9 @@ static int sfp_sm_mod_probe(struct sfp *
- return -EAGAIN;
- }
-
-- /* Cotsworks do not seem to update the checksums when they
-- * do the final programming with the final module part number,
-- * serial number and date code.
-+ /* Cotsworks do not seem to update the checksums when they update the
-+ * module part number, serial number and date code. They also format
-+ * the date code incorrectly.
- */
- cotsworks = !memcmp(id.base.vendor_name, "COTSWORKS ", 16);
-
-@@ -1612,11 +1612,12 @@ static int sfp_sm_mod_probe(struct sfp *
-
- sfp->id = id;
-
-- date[0] = sfp->id.ext.datecode[4];
-- date[1] = sfp->id.ext.datecode[5];
-+ /* Cotsworks also gets the date code wrong. */
-+ date[0] = sfp->id.ext.datecode[4 - 2 * cotsworks];
-+ date[1] = sfp->id.ext.datecode[5 - 2 * cotsworks];
- date[2] = '-';
-- date[3] = sfp->id.ext.datecode[2];
-- date[4] = sfp->id.ext.datecode[3];
-+ date[3] = sfp->id.ext.datecode[2 + 2 * cotsworks];
-+ date[4] = sfp->id.ext.datecode[3 + 2 * cotsworks];
- date[5] = '-';
- date[6] = sfp->id.ext.datecode[0];
- date[7] = sfp->id.ext.datecode[1];
+++ /dev/null
-From 28baa5e2635285b178326b301f534ed95c65dd01 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 29 Sep 2016 11:44:39 +0200
-Subject: [PATCH] sfp: retry phy probe if unsuccessful
-
-Some phys seem to take longer than 50 ms to come out of reset, so retry
-until we find a phy.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/phy/sfp.c | 38 +++++++++++++++++++++++++-------------
- 1 file changed, 25 insertions(+), 13 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1374,7 +1374,7 @@ static void sfp_sm_phy_detach(struct sfp
- sfp->mod_phy = NULL;
- }
-
--static void sfp_sm_probe_phy(struct sfp *sfp)
-+static int sfp_sm_probe_phy(struct sfp *sfp)
- {
- struct phy_device *phy;
- int err;
-@@ -1384,11 +1384,11 @@ static void sfp_sm_probe_phy(struct sfp
- phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
- if (phy == ERR_PTR(-ENODEV)) {
- dev_info(sfp->dev, "no PHY detected\n");
-- return;
-+ return -EAGAIN;
- }
- if (IS_ERR(phy)) {
- dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
-- return;
-+ return PTR_ERR(phy);
- }
-
- err = sfp_add_phy(sfp->sfp_bus, phy);
-@@ -1396,11 +1396,13 @@ static void sfp_sm_probe_phy(struct sfp
- phy_device_remove(phy);
- phy_device_free(phy);
- dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err);
-- return;
-+ return err;
- }
-
- sfp->mod_phy = phy;
- phy_start(phy);
-+
-+ return 0;
- }
-
- static void sfp_sm_link_up(struct sfp *sfp)
-@@ -1464,14 +1466,9 @@ static void sfp_sm_fault(struct sfp *sfp
-
- static void sfp_sm_mod_init(struct sfp *sfp)
- {
-- sfp_module_tx_enable(sfp);
-+ int ret = 0;
-
-- /* Wait t_init before indicating that the link is up, provided the
-- * current state indicates no TX_FAULT. If TX_FAULT clears before
-- * this time, that's fine too.
-- */
-- sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-- sfp->sm_retries = 5;
-+ sfp_module_tx_enable(sfp);
-
- /* Setting the serdes link mode is guesswork: there's no
- * field in the EEPROM which indicates what mode should
-@@ -1485,7 +1482,22 @@ static void sfp_sm_mod_init(struct sfp *
- if (sfp->id.base.e1000_base_t ||
- sfp->id.base.e100_base_lx ||
- sfp->id.base.e100_base_fx)
-- sfp_sm_probe_phy(sfp);
-+ ret = sfp_sm_probe_phy(sfp);
-+
-+ if (!ret) {
-+ /* Wait t_init before indicating that the link is up, provided
-+ * the current state indicates no TX_FAULT. If TX_FAULT clears
-+ * this time, that's fine too.
-+ */
-+ sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-+ sfp->sm_retries = 5;
-+ return;
-+ }
-+
-+ if (ret == -EAGAIN)
-+ sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+ else
-+ sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0);
- }
-
- static int sfp_sm_mod_hpower(struct sfp *sfp)
projects / openwrt / openwrt.git / commitdiff