finally fix boot failures on buffalo devices, tested on WHR-HP-G54 and WRT54GS v1...
authorFlorian Fainelli <florian@openwrt.org>
Fri, 17 Apr 2009 09:22:02 +0000 (09:22 +0000)
committerFlorian Fainelli <florian@openwrt.org>
Fri, 17 Apr 2009 09:22:02 +0000 (09:22 +0000)
SVN-Revision: 15232

target/linux/brcm47xx/config-2.6.28
target/linux/brcm47xx/patches-2.6.28/800-fix_cfe_detection.patch
target/linux/brcm47xx/patches-2.6.28/900-disable_early_printk.patch [new file with mode: 0644]

index 79a6d72..71ff7df 100644 (file)
@@ -56,7 +56,6 @@ CONFIG_DEVPORT=y
 # CONFIG_DM9000 is not set
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
 # CONFIG_FIXED_PHY is not set
 # CONFIG_FREEZER is not set
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -220,7 +219,6 @@ CONFIG_SSB_SERIAL=y
 CONFIG_SSB_SPROM=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
 CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
index 63a71f0..6cba540 100644 (file)
@@ -98,8 +98,8 @@
 -      prom_init_console();
 -      prom_init_cmdline();
 +      if (prom_init_cfe() == 0) {
-+              prom_init_console_cfe();
-+              prom_init_cmdline_cfe();
++              //prom_init_console_cfe();
++              //prom_init_cmdline_cfe();
 +              __prom_putchar = prom_putchar_cfe;
 +      }
 +
diff --git a/target/linux/brcm47xx/patches-2.6.28/900-disable_early_printk.patch b/target/linux/brcm47xx/patches-2.6.28/900-disable_early_printk.patch
new file mode 100644 (file)
index 0000000..32b5776
--- /dev/null
@@ -0,0 +1,10 @@
+--- linux-2.6.28.9/arch/mips/Kconfig   2009-04-17 10:43:28.000000000 +0200
++++ linux-2.6.28.9.new/arch/mips/Kconfig       2009-04-17 10:43:51.000000000 +0200
+@@ -56,7 +56,6 @@
+       select SSB_B43_PCI_BRIDGE if PCI
+       select SSB_PCICORE_HOSTMODE if PCI
+       select GENERIC_GPIO
+-      select SYS_HAS_EARLY_PRINTK
+       select CFE
+       help
+        Support for BCM47XX based boards