ar71xx: QCA956X: add missing register

Signed-off-by: Henryk Heisig <hyniu@o2.pl>

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
index 07cb12c8e9ff20ff03e239cf235bc03397041fa0..91ff8b2fc904729f9777ecb7ccd8ae75dee141c6 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
@@ -686,7 +686,6 @@ static int __init ath79_setup_phy_if_mode(unsigned int id,
                case ATH79_SOC_AR7241:
                case ATH79_SOC_AR9330:
                case ATH79_SOC_AR9331:
                case ATH79_SOC_AR7241:
                case ATH79_SOC_AR9330:
                case ATH79_SOC_AR9331:

-               case ATH79_SOC_QCA956X:

                case ATH79_SOC_TP9343:
                        pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII;
                        break;
                case ATH79_SOC_TP9343:
                        pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII;
                        break;


@@ -698,6 +697,7 @@ static int __init ath79_setup_phy_if_mode(unsigned int id,
                case ATH79_SOC_AR9342:
                case ATH79_SOC_AR9344:
                case ATH79_SOC_QCA9533:
                case ATH79_SOC_AR9342:
                case ATH79_SOC_AR9344:
                case ATH79_SOC_QCA9533:

+               case ATH79_SOC_QCA956X:

                        switch (pdata->phy_if_mode) {
                        case PHY_INTERFACE_MODE_MII:
                        case PHY_INTERFACE_MODE_GMII:
                        switch (pdata->phy_if_mode) {
                        case PHY_INTERFACE_MODE_MII:
                        case PHY_INTERFACE_MODE_GMII:


@@ -814,6 +814,27 @@ void __init ath79_setup_qca955x_eth_cfg(u32 mask)
        iounmap(base);
 }
 
        iounmap(base);
 }
 

+void __init ath79_setup_qca956x_eth_cfg(u32 mask)
+{
+       void __iomem *base;
+       u32 t;
+
+       base = ioremap(QCA956X_GMAC_BASE, QCA956X_GMAC_SIZE);
+
+       t = __raw_readl(base + QCA956X_GMAC_REG_ETH_CFG);
+
+       t &= ~(QCA956X_ETH_CFG_SW_ONLY_MODE |
+              QCA956X_ETH_CFG_SW_PHY_SWAP);
+
+       t |= mask;
+
+       __raw_writel(t, base + QCA956X_GMAC_REG_ETH_CFG);
+       /* flush write */
+       __raw_readl(base + QCA956X_GMAC_REG_ETH_CFG);
+
+       iounmap(base);
+}
+

 static int ath79_eth_instance __initdata;
 void __init ath79_register_eth(unsigned int id)
 {
 static int ath79_eth_instance __initdata;
 void __init ath79_register_eth(unsigned int id)
 {

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h
index 5a226e40284b6853b59812ffc791e0612c91fa9b..fb9e4f63c66ef9008e423007ecff02c93c321fb8 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h
@@ -49,5 +49,6 @@ void ath79_setup_ar933x_phy4_switch(bool mac, bool mdio);
 void ath79_setup_ar934x_eth_cfg(u32 mask);
 void ath79_setup_ar934x_eth_rx_delay(unsigned int rxd, unsigned int rxdv);
 void ath79_setup_qca955x_eth_cfg(u32 mask);
 void ath79_setup_ar934x_eth_cfg(u32 mask);
 void ath79_setup_ar934x_eth_rx_delay(unsigned int rxd, unsigned int rxdv);
 void ath79_setup_qca955x_eth_cfg(u32 mask);

+void ath79_setup_qca956x_eth_cfg(u32 mask);

 
 #endif /* _ATH79_DEV_ETH_H */
 
 #endif /* _ATH79_DEV_ETH_H */

diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
index 5fd352c638a75063945adadb64b1043cd81b506c..078fa157f242ce4350185d97a61ef5d1f3f16fc5 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
+++ b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
@@ -37,11 +37,13 @@ struct ag71xx_platform_data {
        u8              is_ar724x:1;
        u8              has_ar8216:1;
        u8              use_flow_control:1;
        u8              is_ar724x:1;
        u8              has_ar8216:1;
        u8              use_flow_control:1;

+       u8              is_qca956x:1;

 
        struct ag71xx_switch_platform_data *switch_data;
 
        void            (*ddr_flush)(void);
        void            (*set_speed)(int speed);
 
        struct ag71xx_switch_platform_data *switch_data;
 
        void            (*ddr_flush)(void);
        void            (*set_speed)(int speed);

+       void            (*update_pll)(u32 pll_10, u32 pll_100, u32 pll_1000);

 
        u32             fifo_cfg1;
        u32             fifo_cfg2;
 
        u32             fifo_cfg1;
        u32             fifo_cfg2;

diff --git a/target/linux/ar71xx/patches-4.4/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.4/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch
new file mode 100644 (file)
index 0000000..dff3543
--- /dev/null
+++ b/target/linux/ar71xx/patches-4.4/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch
@@ -0,0 +1,38 @@
+--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+@@ -157,6 +157,10 @@
+ #define QCA956X_EHCI0_BASE    0x1b000000
+ #define QCA956X_EHCI1_BASE    0x1b400000
+ #define QCA956X_EHCI_SIZE     0x200
++#define QCA956X_GMAC_SGMII_BASE       (AR71XX_APB_BASE + 0x00070000)
++#define QCA956X_GMAC_SGMII_SIZE       0x64
++#define QCA956X_PLL_BASE      (AR71XX_APB_BASE + 0x00050000)
++#define QCA956X_PLL_SIZE      0x50
+ #define QCA956X_GMAC_BASE     (AR71XX_APB_BASE + 0x00070000)
+ #define QCA956X_GMAC_SIZE     0x64
+ 
+@@ -404,6 +408,7 @@
+ #define QCA956X_PLL_DDR_CONFIG_REG                    0x08
+ #define QCA956X_PLL_DDR_CONFIG1_REG                   0x0c
+ #define QCA956X_PLL_CLK_CTRL_REG                      0x10
++#define QCA956X_PLL_ETH_XMII_CONTROL_REG              0x30
+ 
+ #define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT           12
+ #define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK            0x1f
+@@ -1186,4 +1191,16 @@
+ #define QCA955X_ETH_CFG_TXE_DELAY_MASK        0x3
+ #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT       20
+ 
++/*
++ * QCA956X GMAC Interface
++ */
++
++#define QCA956X_GMAC_REG_ETH_CFG              0x00
++
++#define QCA956X_ETH_CFG_SW_ONLY_MODE          BIT(7)
++#define QCA956X_ETH_CFG_SW_PHY_SWAP               BIT(8)
++#define QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP      BIT(9)
++#define QCA956X_ETH_CFG_SW_APB_ACCESS         BIT(10)
++#define QCA956X_ETH_CFG_SW_ACC_MSB_FIRST      BIT(13)
++
+ #endif /* __ASM_MACH_AR71XX_REGS_H */

diff --git a/target/linux/ar71xx/patches-4.4/640-MIPS-ath79-add-QCA955x-wmac-reset.patch b/target/linux/ar71xx/patches-4.4/640-MIPS-ath79-add-QCA955x-wmac-reset.patch
index add2992186ad1d82ce924d2f1ccdf3c36c390a3d..8aa5957a7152af27854f6f7c197120b8029cf9e8 100644 (file)
--- a/target/linux/ar71xx/patches-4.4/640-MIPS-ath79-add-QCA955x-wmac-reset.patch
+++ b/target/linux/ar71xx/patches-4.4/640-MIPS-ath79-add-QCA955x-wmac-reset.patch
@@ -20,7 +20,7 @@
  #define AR71XX_UART_BASE      (AR71XX_APB_BASE + 0x00020000)
  #define AR71XX_UART_SIZE      0x100
  #define AR71XX_USB_CTRL_BASE  (AR71XX_APB_BASE + 0x00030000)
  #define AR71XX_UART_BASE      (AR71XX_APB_BASE + 0x00020000)
  #define AR71XX_UART_SIZE      0x100
  #define AR71XX_USB_CTRL_BASE  (AR71XX_APB_BASE + 0x00030000)

-@@ -218,6 +218,9 @@
+@@ -222,6 +222,9 @@

  #define QCA953X_DDR_REG_FLUSH_PCIE    0xa8
  #define QCA953X_DDR_REG_FLUSH_WMAC    0xac
  
  #define QCA953X_DDR_REG_FLUSH_PCIE    0xa8
  #define QCA953X_DDR_REG_FLUSH_WMAC    0xac
  

diff --git a/target/linux/ar71xx/patches-4.4/820-MIPS-ath79-add_gpio_function2_setup.patch b/target/linux/ar71xx/patches-4.4/820-MIPS-ath79-add_gpio_function2_setup.patch
index 7db6ad361fa21252118e589195b0bc73222cf4f5..6b331587d157511a40fc1e46630c416a60565a0b 100644 (file)
--- a/target/linux/ar71xx/patches-4.4/820-MIPS-ath79-add_gpio_function2_setup.patch
+++ b/target/linux/ar71xx/patches-4.4/820-MIPS-ath79-add_gpio_function2_setup.patch
@@ -48,7 +48,7 @@ functions on the Arduino Yun.
        void __iomem *reg = ath79_gpio_get_function_reg();
 --- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
 +++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
        void __iomem *reg = ath79_gpio_get_function_reg();
 --- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
 +++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h

-@@ -850,6 +850,7 @@
+@@ -855,6 +855,7 @@

  #define AR71XX_GPIO_REG_INT_PENDING   0x20
  #define AR71XX_GPIO_REG_INT_ENABLE    0x24
  #define AR71XX_GPIO_REG_FUNC          0x28
  #define AR71XX_GPIO_REG_INT_PENDING   0x20
  #define AR71XX_GPIO_REG_INT_ENABLE    0x24
  #define AR71XX_GPIO_REG_FUNC          0x28


@@ -56,7 +56,7 @@ functions on the Arduino Yun.
  
  #define AR934X_GPIO_REG_OUT_FUNC0     0x2c
  #define AR934X_GPIO_REG_OUT_FUNC1     0x30
  
  #define AR934X_GPIO_REG_OUT_FUNC0     0x2c
  #define AR934X_GPIO_REG_OUT_FUNC1     0x30

-@@ -974,6 +975,8 @@
+@@ -979,6 +980,8 @@

  #define AR724X_GPIO_FUNC_UART_EN              BIT(1)
  #define AR724X_GPIO_FUNC_JTAG_DISABLE         BIT(0)
  
  #define AR724X_GPIO_FUNC_UART_EN              BIT(1)
  #define AR724X_GPIO_FUNC_JTAG_DISABLE         BIT(0)