+++ /dev/null
---- /dev/null
-+++ b/arch/arm/plat-omap/bootreason.c
-@@ -0,0 +1,79 @@
-+/*
-+ * linux/arch/arm/plat-omap/bootreason.c
-+ *
-+ * OMAP Bootreason passing
-+ *
-+ * Copyright (c) 2004 Nokia
-+ *
-+ * Written by David Weinehall <david.weinehall@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
-+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program; if not, write to the Free Software Foundation, Inc.,
-+ * 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+#include <linux/proc_fs.h>
-+#include <linux/errno.h>
-+#include <plat/board.h>
-+
-+static char boot_reason[16];
-+
-+static int omap_bootreason_read_proc(char *page, char **start, off_t off,
-+ int count, int *eof, void *data)
-+{
-+ int len = 0;
-+
-+ len += sprintf(page + len, "%s\n", boot_reason);
-+
-+ *start = page + off;
-+
-+ if (len > off)
-+ len -= off;
-+ else
-+ len = 0;
-+
-+ return len < count ? len : count;
-+}
-+
-+static int __init bootreason_init(void)
-+{
-+ const struct omap_boot_reason_config *cfg;
-+ int reason_valid = 0;
-+
-+ cfg = omap_get_config(OMAP_TAG_BOOT_REASON, struct omap_boot_reason_config);
-+ if (cfg != NULL) {
-+ strncpy(boot_reason, cfg->reason_str, sizeof(cfg->reason_str));
-+ boot_reason[sizeof(cfg->reason_str)] = 0;
-+ reason_valid = 1;
-+ } else {
-+ /* Read the boot reason from the OMAP registers */
-+ }
-+
-+ if (!reason_valid)
-+ return -ENOENT;
-+
-+ printk(KERN_INFO "Bootup reason: %s\n", boot_reason);
-+
-+ if (!create_proc_read_entry("bootreason", S_IRUGO, NULL,
-+ omap_bootreason_read_proc, NULL))
-+ return -ENOMEM;
-+
-+ return 0;
-+}
-+
-+late_initcall(bootreason_init);
---- a/arch/arm/plat-omap/common.c
-+++ b/arch/arm/plat-omap/common.c
-@@ -24,18 +24,90 @@
-
- #include <plat/omap-secure.h>
-
-+#include <asm/setup.h>
-+
-
- #define NO_LENGTH_CHECK 0xffffffff
-
- struct omap_board_config_kernel *omap_board_config __initdata;
- int omap_board_config_size;
-
-+unsigned char omap_bootloader_tag[1024];
-+int omap_bootloader_tag_len;
-+
-+/* used by omap-smp.c and board-4430sdp.c */
-+void __iomem *gic_cpu_base_addr;
-+
-+#ifdef CONFIG_OMAP_BOOT_TAG
-+
-+static int __init parse_tag_omap(const struct tag *tag)
-+{
-+ u32 size = tag->hdr.size - (sizeof(tag->hdr) >> 2);
-+
-+ size <<= 2;
-+ if (size > sizeof(omap_bootloader_tag))
-+ return -1;
-+
-+ memcpy(omap_bootloader_tag, tag->u.omap.data, size);
-+ omap_bootloader_tag_len = size;
-+
-+ return 0;
-+}
-+
-+__tagtable(ATAG_BOARD, parse_tag_omap);
-+
-+#endif
-+
- static const void *__init get_config(u16 tag, size_t len,
- int skip, size_t *len_out)
- {
- struct omap_board_config_kernel *kinfo = NULL;
- int i;
-
-+#ifdef CONFIG_OMAP_BOOT_TAG
-+ struct omap_board_config_entry *info = NULL;
-+
-+ if (omap_bootloader_tag_len > 4)
-+ info = (struct omap_board_config_entry *) omap_bootloader_tag;
-+ while (info != NULL) {
-+ u8 *next;
-+
-+ if (info->tag == tag) {
-+ if (skip == 0)
-+ break;
-+ skip--;
-+ }
-+
-+ if ((info->len & 0x03) != 0) {
-+ /* We bail out to avoid an alignment fault */
-+ printk(KERN_ERR "OMAP peripheral config: Length (%d) not word-aligned (tag %04x)\n",
-+ info->len, info->tag);
-+ return NULL;
-+ }
-+ next = (u8 *) info + sizeof(*info) + info->len;
-+ if (next >= omap_bootloader_tag + omap_bootloader_tag_len)
-+ info = NULL;
-+ else
-+ info = (struct omap_board_config_entry *) next;
-+ }
-+ if (info != NULL) {
-+ /* Check the length as a lame attempt to check for
-+ * binary inconsistency. */
-+ if (len != NO_LENGTH_CHECK) {
-+ /* Word-align len */
-+ if (len & 0x03)
-+ len = (len + 3) & ~0x03;
-+ if (info->len != len) {
-+ printk(KERN_ERR "OMAP peripheral config: Length mismatch with tag %x (want %d, got %d)\n",
-+ tag, len, info->len);
-+ return NULL;
-+ }
-+ }
-+ if (len_out != NULL)
-+ *len_out = info->len;
-+ return info->data;
-+ }
-+#endif
- /* Try to find the config from the board-specific structures
- * in the kernel. */
- for (i = 0; i < omap_board_config_size; i++) {
---- /dev/null
-+++ b/arch/arm/plat-omap/component-version.c
-@@ -0,0 +1,64 @@
-+/*
-+ * linux/arch/arm/plat-omap/component-version.c
-+ *
-+ * Copyright (C) 2005 Nokia Corporation
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/err.h>
-+#include <linux/proc_fs.h>
-+#include <plat/board.h>
-+
-+static int component_version_read_proc(char *page, char **start, off_t off,
-+ int count, int *eof, void *data)
-+{
-+ int len, i;
-+ const struct omap_version_config *ver;
-+ char *p;
-+
-+ i = 0;
-+ p = page;
-+ while ((ver = omap_get_nr_config(OMAP_TAG_VERSION_STR,
-+ struct omap_version_config, i)) != NULL) {
-+ p += sprintf(p, "%-12s%s\n", ver->component, ver->version);
-+ i++;
-+ }
-+
-+ len = (p - page) - off;
-+ if (len < 0)
-+ len = 0;
-+
-+ *eof = (len <= count) ? 1 : 0;
-+ *start = page + off;
-+
-+ return len;
-+}
-+
-+static int __init component_version_init(void)
-+{
-+ if (omap_get_config(OMAP_TAG_VERSION_STR, struct omap_version_config) == NULL)
-+ return -ENODEV;
-+ if (!create_proc_read_entry("component_version", S_IRUGO, NULL,
-+ component_version_read_proc, NULL))
-+ return -ENOMEM;
-+
-+ return 0;
-+}
-+
-+static void __exit component_version_exit(void)
-+{
-+ remove_proc_entry("component_version", NULL);
-+}
-+
-+late_initcall(component_version_init);
-+module_exit(component_version_exit);
-+
-+MODULE_AUTHOR("Juha Yrjölä <juha.yrjola@nokia.com>");
-+MODULE_DESCRIPTION("Component version driver");
-+MODULE_LICENSE("GPL");
---- a/arch/arm/plat-omap/Kconfig
-+++ b/arch/arm/plat-omap/Kconfig
-@@ -84,6 +84,38 @@ config OMAP_RESET_CLOCKS
- probably do not want this option enabled until your
- device drivers work properly.
-
-+config OMAP_BOOT_TAG
-+ bool "OMAP bootloader information passing"
-+ depends on ARCH_OMAP
-+ default n
-+ help
-+ Say Y, if you have a bootloader which passes information
-+ about your board and its peripheral configuration.
-+
-+config OMAP_BOOT_REASON
-+ bool "Support for boot reason"
-+ depends on OMAP_BOOT_TAG
-+ default n
-+ help
-+ Say Y, if you want to have a procfs entry for reading the boot
-+ reason in user-space.
-+
-+config OMAP_COMPONENT_VERSION
-+ bool "Support for component version display"
-+ depends on OMAP_BOOT_TAG && PROC_FS
-+ default n
-+ help
-+ Say Y, if you want to have a procfs entry for reading component
-+ versions (supplied by the bootloader) in user-space.
-+
-+config OMAP_GPIO_SWITCH
-+ bool "GPIO switch support"
-+ help
-+ Say Y, if you want to have support for reporting of GPIO
-+ switches (e.g. cover switches) via sysfs. Your bootloader has
-+ to provide information about the switches to the kernel via the
-+ ATAG_BOARD mechanism if they're not defined by the board config.
-+
- config OMAP_MUX
- bool "OMAP multiplexing support"
- depends on ARCH_OMAP
---- a/arch/arm/plat-omap/Makefile
-+++ b/arch/arm/plat-omap/Makefile
-@@ -20,6 +20,9 @@ obj-$(CONFIG_ARCH_OMAP4) += omap_device.
- obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
-
- obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
-+obj-$(CONFIG_OMAP_BOOT_REASON) += bootreason.o
-+obj-$(CONFIG_OMAP_COMPONENT_VERSION) += component-version.o
-+obj-$(CONFIG_OMAP_GPIO_SWITCH) += gpio-switch.o
- obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
- obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
- i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
---- a/arch/arm/include/asm/setup.h
-+++ b/arch/arm/include/asm/setup.h
-@@ -136,6 +136,13 @@ struct tag_acorn {
- __u8 adfsdrives;
- };
-
-+/* TI OMAP specific information */
-+#define ATAG_BOARD 0x414f4d50
-+
-+struct tag_omap {
-+ u8 data[0];
-+};
-+
- /* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
- #define ATAG_MEMCLK 0x41000402
-
-@@ -162,6 +169,11 @@ struct tag {
- struct tag_acorn acorn;
-
- /*
-+ * OMAP specific
-+ */
-+ struct tag_omap omap;
-+
-+ /*
- * DC21285 specific
- */
- struct tag_memclk memclk;
---- /dev/null
-+++ b/arch/arm/plat-omap/gpio-switch.c
-@@ -0,0 +1,554 @@
-+/*
-+ * linux/arch/arm/plat-omap/gpio-switch.c
-+ *
-+ * Copyright (C) 2004-2006 Nokia Corporation
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
-+ * and Paul Mundt <paul.mundt@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/sched.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/timer.h>
-+#include <linux/err.h>
-+#include <linux/slab.h>
-+#include <linux/gpio.h>
-+#include <plat/hardware.h>
-+#include <plat/irqs.h>
-+#include <plat/mux.h>
-+#include <plat/board.h>
-+#include <plat/gpio-switch.h>
-+
-+struct gpio_switch {
-+ char name[14];
-+ u16 gpio;
-+ unsigned flags:4;
-+ unsigned type:4;
-+ unsigned state:1;
-+ unsigned both_edges:1;
-+
-+ u16 debounce_rising;
-+ u16 debounce_falling;
-+
-+ void (* notify)(void *data, int state);
-+ void *notify_data;
-+
-+ struct work_struct work;
-+ struct timer_list timer;
-+ struct platform_device pdev;
-+
-+ struct list_head node;
-+};
-+
-+static LIST_HEAD(gpio_switches);
-+static struct platform_device *gpio_sw_platform_dev;
-+static struct platform_driver gpio_sw_driver;
-+
-+static const struct omap_gpio_switch *board_gpio_sw_table;
-+static int board_gpio_sw_count;
-+
-+static const char *cover_str[2] = { "open", "closed" };
-+static const char *connection_str[2] = { "disconnected", "connected" };
-+static const char *activity_str[2] = { "inactive", "active" };
-+
-+/*
-+ * GPIO switch state default debounce delay in ms
-+ */
-+#define OMAP_GPIO_SW_DEFAULT_DEBOUNCE 10
-+
-+static const char **get_sw_str(struct gpio_switch *sw)
-+{
-+ switch (sw->type) {
-+ case OMAP_GPIO_SWITCH_TYPE_COVER:
-+ return cover_str;
-+ case OMAP_GPIO_SWITCH_TYPE_CONNECTION:
-+ return connection_str;
-+ case OMAP_GPIO_SWITCH_TYPE_ACTIVITY:
-+ return activity_str;
-+ default:
-+ BUG();
-+ return NULL;
-+ }
-+}
-+
-+static const char *get_sw_type(struct gpio_switch *sw)
-+{
-+ switch (sw->type) {
-+ case OMAP_GPIO_SWITCH_TYPE_COVER:
-+ return "cover";
-+ case OMAP_GPIO_SWITCH_TYPE_CONNECTION:
-+ return "connection";
-+ case OMAP_GPIO_SWITCH_TYPE_ACTIVITY:
-+ return "activity";
-+ default:
-+ BUG();
-+ return NULL;
-+ }
-+}
-+
-+static void print_sw_state(struct gpio_switch *sw, int state)
-+{
-+ const char **str;
-+
-+ str = get_sw_str(sw);
-+ if (str != NULL)
-+ printk(KERN_INFO "%s (GPIO %d) is now %s\n", sw->name, sw->gpio, str[state]);
-+}
-+
-+static int gpio_sw_get_state(struct gpio_switch *sw)
-+{
-+ int state;
-+
-+ state = gpio_get_value(sw->gpio);
-+ if (sw->flags & OMAP_GPIO_SWITCH_FLAG_INVERTED)
-+ state = !state;
-+
-+ return state;
-+}
-+
-+static ssize_t gpio_sw_state_store(struct device *dev,
-+ struct device_attribute *attr,
-+ const char *buf,
-+ size_t count)
-+{
-+ struct gpio_switch *sw = dev_get_drvdata(dev);
-+ const char **str;
-+ char state[16];
-+ int enable;
-+
-+ if (!(sw->flags & OMAP_GPIO_SWITCH_FLAG_OUTPUT))
-+ return -EPERM;
-+
-+ if (sscanf(buf, "%15s", state) != 1)
-+ return -EINVAL;
-+
-+ str = get_sw_str(sw);
-+ if (strcmp(state, str[0]) == 0)
-+ sw->state = enable = 0;
-+ else if (strcmp(state, str[1]) == 0)
-+ sw->state = enable = 1;
-+ else
-+ return -EINVAL;
-+
-+ if (sw->flags & OMAP_GPIO_SWITCH_FLAG_INVERTED)
-+ enable = !enable;
-+ gpio_set_value(sw->gpio, enable);
-+
-+ return count;
-+}
-+
-+static ssize_t gpio_sw_state_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct gpio_switch *sw = dev_get_drvdata(dev);
-+ const char **str;
-+
-+ str = get_sw_str(sw);
-+ return sprintf(buf, "%s\n", str[sw->state]);
-+}
-+
-+static DEVICE_ATTR(state, S_IRUGO | S_IWUSR, gpio_sw_state_show,
-+ gpio_sw_state_store);
-+
-+static ssize_t gpio_sw_type_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct gpio_switch *sw = dev_get_drvdata(dev);
-+
-+ return sprintf(buf, "%s\n", get_sw_type(sw));
-+}
-+
-+static DEVICE_ATTR(type, S_IRUGO, gpio_sw_type_show, NULL);
-+
-+static ssize_t gpio_sw_direction_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct gpio_switch *sw = dev_get_drvdata(dev);
-+ int is_output;
-+
-+ is_output = sw->flags & OMAP_GPIO_SWITCH_FLAG_OUTPUT;
-+ return sprintf(buf, "%s\n", is_output ? "output" : "input");
-+}
-+
-+static DEVICE_ATTR(direction, S_IRUGO, gpio_sw_direction_show, NULL);
-+
-+
-+static irqreturn_t gpio_sw_irq_handler(int irq, void *arg)
-+{
-+ struct gpio_switch *sw = arg;
-+ unsigned long timeout;
-+ int state;
-+
-+ if (!sw->both_edges) {
-+ if (gpio_get_value(sw->gpio))
-+ irq_set_irq_type(OMAP_GPIO_IRQ(sw->gpio), IRQ_TYPE_EDGE_FALLING);
-+ else
-+ irq_set_irq_type(OMAP_GPIO_IRQ(sw->gpio), IRQ_TYPE_EDGE_RISING);
-+ }
-+
-+ state = gpio_sw_get_state(sw);
-+ if (sw->state == state)
-+ return IRQ_HANDLED;
-+
-+ if (state)
-+ timeout = sw->debounce_rising;
-+ else
-+ timeout = sw->debounce_falling;
-+ if (!timeout)
-+ schedule_work(&sw->work);
-+ else
-+ mod_timer(&sw->timer, jiffies + msecs_to_jiffies(timeout));
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void gpio_sw_timer(unsigned long arg)
-+{
-+ struct gpio_switch *sw = (struct gpio_switch *) arg;
-+
-+ schedule_work(&sw->work);
-+}
-+
-+static void gpio_sw_handler(struct work_struct *work)
-+{
-+ struct gpio_switch *sw = container_of(work, struct gpio_switch, work);
-+ int state;
-+
-+ state = gpio_sw_get_state(sw);
-+ if (sw->state == state)
-+ return;
-+
-+ sw->state = state;
-+ if (sw->notify != NULL)
-+ sw->notify(sw->notify_data, state);
-+ sysfs_notify(&sw->pdev.dev.kobj, NULL, "state");
-+ print_sw_state(sw, state);
-+}
-+
-+static int __init can_do_both_edges(struct gpio_switch *sw)
-+{
-+ if (!cpu_class_is_omap1())
-+ return 1;
-+ if (OMAP_GPIO_IS_MPUIO(sw->gpio))
-+ return 0;
-+ else
-+ return 1;
-+}
-+
-+static void gpio_sw_release(struct device *dev)
-+{
-+}
-+
-+static int __init new_switch(struct gpio_switch *sw)
-+{
-+ int r, direction, trigger;
-+
-+ switch (sw->type) {
-+ case OMAP_GPIO_SWITCH_TYPE_COVER:
-+ case OMAP_GPIO_SWITCH_TYPE_CONNECTION:
-+ case OMAP_GPIO_SWITCH_TYPE_ACTIVITY:
-+ break;
-+ default:
-+ printk(KERN_ERR "invalid GPIO switch type: %d\n", sw->type);
-+ return -EINVAL;
-+ }
-+
-+ sw->pdev.name = sw->name;
-+ sw->pdev.id = -1;
-+
-+ sw->pdev.dev.parent = &gpio_sw_platform_dev->dev;
-+ sw->pdev.dev.driver = &gpio_sw_driver.driver;
-+ sw->pdev.dev.release = gpio_sw_release;
-+
-+ r = platform_device_register(&sw->pdev);
-+ if (r) {
-+ printk(KERN_ERR "gpio-switch: platform device registration "
-+ "failed for %s", sw->name);
-+ return r;
-+ }
-+ dev_set_drvdata(&sw->pdev.dev, sw);
-+
-+ r = gpio_request(sw->gpio, "gpio-switch");
-+ if (r < 0) {
-+ platform_device_unregister(&sw->pdev);
-+ return r;
-+ }
-+
-+ /* input: 1, output: 0 */
-+ direction = !(sw->flags & OMAP_GPIO_SWITCH_FLAG_OUTPUT);
-+ if (direction)
-+ gpio_direction_input(sw->gpio);
-+ else
-+ gpio_direction_output(sw->gpio, 0);
-+
-+ sw->state = gpio_sw_get_state(sw);
-+
-+ r = 0;
-+ r |= device_create_file(&sw->pdev.dev, &dev_attr_state);
-+ r |= device_create_file(&sw->pdev.dev, &dev_attr_type);
-+ r |= device_create_file(&sw->pdev.dev, &dev_attr_direction);
-+ if (r)
-+ printk(KERN_ERR "gpio-switch: attribute file creation "
-+ "failed for %s\n", sw->name);
-+
-+ if (!direction)
-+ return 0;
-+
-+ if (can_do_both_edges(sw)) {
-+ trigger = IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING;
-+ sw->both_edges = 1;
-+ } else {
-+ if (gpio_get_value(sw->gpio))
-+ trigger = IRQF_TRIGGER_FALLING;
-+ else
-+ trigger = IRQF_TRIGGER_RISING;
-+ }
-+ r = request_irq(OMAP_GPIO_IRQ(sw->gpio), gpio_sw_irq_handler,
-+ IRQF_SHARED | trigger, sw->name, sw);
-+ if (r < 0) {
-+ printk(KERN_ERR "gpio-switch: request_irq() failed "
-+ "for GPIO %d\n", sw->gpio);
-+ platform_device_unregister(&sw->pdev);
-+ gpio_free(sw->gpio);
-+ return r;
-+ }
-+
-+ INIT_WORK(&sw->work, gpio_sw_handler);
-+ init_timer(&sw->timer);
-+
-+ sw->timer.function = gpio_sw_timer;
-+ sw->timer.data = (unsigned long)sw;
-+
-+ list_add(&sw->node, &gpio_switches);
-+
-+ return 0;
-+}
-+
-+static int __init add_atag_switches(void)
-+{
-+ const struct omap_gpio_switch_config *cfg;
-+ struct gpio_switch *sw;
-+ int i, r;
-+
-+ for (i = 0; ; i++) {
-+ cfg = omap_get_nr_config(OMAP_TAG_GPIO_SWITCH,
-+ struct omap_gpio_switch_config, i);
-+ if (cfg == NULL)
-+ break;
-+ sw = kzalloc(sizeof(*sw), GFP_KERNEL);
-+ if (sw == NULL) {
-+ printk(KERN_ERR "gpio-switch: kmalloc failed\n");
-+ return -ENOMEM;
-+ }
-+ strncpy(sw->name, cfg->name, sizeof(cfg->name));
-+ sw->gpio = cfg->gpio;
-+ sw->flags = cfg->flags;
-+ sw->type = cfg->type;
-+ sw->debounce_rising = OMAP_GPIO_SW_DEFAULT_DEBOUNCE;
-+ sw->debounce_falling = OMAP_GPIO_SW_DEFAULT_DEBOUNCE;
-+ if ((r = new_switch(sw)) < 0) {
-+ kfree(sw);
-+ return r;
-+ }
-+ }
-+ return 0;
-+}
-+
-+static struct gpio_switch * __init find_switch(int gpio, const char *name)
-+{
-+ struct gpio_switch *sw;
-+
-+ list_for_each_entry(sw, &gpio_switches, node) {
-+ if ((gpio < 0 || sw->gpio != gpio) &&
-+ (name == NULL || strcmp(sw->name, name) != 0))
-+ continue;
-+
-+ if (gpio < 0 || name == NULL)
-+ goto no_check;
-+
-+ if (strcmp(sw->name, name) != 0)
-+ printk("gpio-switch: name mismatch for %d (%s, %s)\n",
-+ gpio, name, sw->name);
-+ else if (sw->gpio != gpio)
-+ printk("gpio-switch: GPIO mismatch for %s (%d, %d)\n",
-+ name, gpio, sw->gpio);
-+no_check:
-+ return sw;
-+ }
-+ return NULL;
-+}
-+
-+static int __init add_board_switches(void)
-+{
-+ int i;
-+
-+ for (i = 0; i < board_gpio_sw_count; i++) {
-+ const struct omap_gpio_switch *cfg;
-+ struct gpio_switch *sw;
-+ int r;
-+
-+ cfg = board_gpio_sw_table + i;
-+ if (strlen(cfg->name) > sizeof(sw->name) - 1)
-+ return -EINVAL;
-+ /* Check whether we only update an existing switch
-+ * or add a new switch. */
-+ sw = find_switch(cfg->gpio, cfg->name);
-+ if (sw != NULL) {
-+ sw->debounce_rising = cfg->debounce_rising;
-+ sw->debounce_falling = cfg->debounce_falling;
-+ sw->notify = cfg->notify;
-+ sw->notify_data = cfg->notify_data;
-+ continue;
-+ } else {
-+ if (cfg->gpio < 0 || cfg->name == NULL) {
-+ printk("gpio-switch: required switch not "
-+ "found (%d, %s)\n", cfg->gpio,
-+ cfg->name);
-+ continue;
-+ }
-+ }
-+ sw = kzalloc(sizeof(*sw), GFP_KERNEL);
-+ if (sw == NULL) {
-+ printk(KERN_ERR "gpio-switch: kmalloc failed\n");
-+ return -ENOMEM;
-+ }
-+ strlcpy(sw->name, cfg->name, sizeof(sw->name));
-+ sw->gpio = cfg->gpio;
-+ sw->flags = cfg->flags;
-+ sw->type = cfg->type;
-+ sw->debounce_rising = cfg->debounce_rising;
-+ sw->debounce_falling = cfg->debounce_falling;
-+ sw->notify = cfg->notify;
-+ sw->notify_data = cfg->notify_data;
-+ if ((r = new_switch(sw)) < 0) {
-+ kfree(sw);
-+ return r;
-+ }
-+ }
-+ return 0;
-+}
-+
-+static void gpio_sw_cleanup(void)
-+{
-+ struct gpio_switch *sw = NULL, *old = NULL;
-+
-+ list_for_each_entry(sw, &gpio_switches, node) {
-+ if (old != NULL)
-+ kfree(old);
-+ flush_scheduled_work();
-+ del_timer_sync(&sw->timer);
-+
-+ free_irq(OMAP_GPIO_IRQ(sw->gpio), sw);
-+
-+ device_remove_file(&sw->pdev.dev, &dev_attr_state);
-+ device_remove_file(&sw->pdev.dev, &dev_attr_type);
-+ device_remove_file(&sw->pdev.dev, &dev_attr_direction);
-+
-+ platform_device_unregister(&sw->pdev);
-+ gpio_free(sw->gpio);
-+ old = sw;
-+ }
-+ kfree(old);
-+}
-+
-+static void __init report_initial_state(void)
-+{
-+ struct gpio_switch *sw;
-+
-+ list_for_each_entry(sw, &gpio_switches, node) {
-+ int state;
-+
-+ state = gpio_get_value(sw->gpio);
-+ if (sw->flags & OMAP_GPIO_SWITCH_FLAG_INVERTED)
-+ state = !state;
-+ if (sw->notify != NULL)
-+ sw->notify(sw->notify_data, state);
-+ print_sw_state(sw, state);
-+ }
-+}
-+
-+static int gpio_sw_remove(struct platform_device *dev)
-+{
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_sw_driver = {
-+ .remove = gpio_sw_remove,
-+ .driver = {
-+ .name = "gpio-switch",
-+ },
-+};
-+
-+void __init omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
-+ int count)
-+{
-+ BUG_ON(board_gpio_sw_table != NULL);
-+
-+ board_gpio_sw_table = tbl;
-+ board_gpio_sw_count = count;
-+}
-+
-+static int __init gpio_sw_init(void)
-+{
-+ int r;
-+
-+ printk(KERN_INFO "OMAP GPIO switch handler initializing\n");
-+
-+ r = platform_driver_register(&gpio_sw_driver);
-+ if (r)
-+ return r;
-+
-+ gpio_sw_platform_dev = platform_device_register_simple("gpio-switch",
-+ -1, NULL, 0);
-+ if (IS_ERR(gpio_sw_platform_dev)) {
-+ r = PTR_ERR(gpio_sw_platform_dev);
-+ goto err1;
-+ }
-+
-+ r = add_atag_switches();
-+ if (r < 0)
-+ goto err2;
-+
-+ r = add_board_switches();
-+ if (r < 0)
-+ goto err2;
-+
-+ report_initial_state();
-+
-+ return 0;
-+err2:
-+ gpio_sw_cleanup();
-+ platform_device_unregister(gpio_sw_platform_dev);
-+err1:
-+ platform_driver_unregister(&gpio_sw_driver);
-+ return r;
-+}
-+
-+static void __exit gpio_sw_exit(void)
-+{
-+ gpio_sw_cleanup();
-+ platform_device_unregister(gpio_sw_platform_dev);
-+ platform_driver_unregister(&gpio_sw_driver);
-+}
-+
-+#ifndef MODULE
-+late_initcall(gpio_sw_init);
-+#else
-+module_init(gpio_sw_init);
-+#endif
-+module_exit(gpio_sw_exit);
-+
-+MODULE_AUTHOR("Juha Yrjölä <juha.yrjola@nokia.com>, Paul Mundt <paul.mundt@nokia.com");
-+MODULE_DESCRIPTION("GPIO switch driver");
-+MODULE_LICENSE("GPL");
---- a/arch/arm/plat-omap/include/plat/board.h
-+++ b/arch/arm/plat-omap/include/plat/board.h
-@@ -151,6 +151,14 @@ struct omap_board_config_kernel {
- const void *data;
- };
-
-+struct omap_gpio_switch_config {
-+ char name[12];
-+ u16 gpio;
-+ int flags:4;
-+ int type:4;
-+ int key_code:24; /* Linux key code */
-+};
-+
- extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
-
- #define omap_get_config(tag, type) \
+++ /dev/null
---- /dev/null
-+++ b/drivers/cbus/cbus.c
-@@ -0,0 +1,335 @@
-+/*
-+ * drivers/cbus/cbus.c
-+ *
-+ * Support functions for CBUS serial protocol
-+ *
-+ * Copyright (C) 2004-2010 Nokia Corporation
-+ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
-+ *
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
-+ * David Weinehall <david.weinehall@nokia.com>, and
-+ * Mikko Ylinen <mikko.k.ylinen@nokia.com>
-+ *
-+ * Several updates and cleanups by Felipe Balbi <felipe.balbi@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/export.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+#include <linux/gpio.h>
-+#include <linux/platform_device.h>
-+#include <linux/platform_data/cbus.h>
-+
-+#include "cbus.h"
-+
-+#define CBUS_XFER_READ 1
-+#define CBUS_XFER_WRITE 0
-+
-+struct cbus_host {
-+ /* host lock */
-+ spinlock_t lock;
-+
-+ struct device *dev;
-+
-+ int clk_gpio;
-+ int dat_gpio;
-+ int sel_gpio;
-+};
-+
-+/**
-+ * cbus_send_bit - sends one bit over the bus
-+ * @host: the host we're using
-+ * @bit: one bit of information to send
-+ * @input: whether to set data pin as input after sending
-+ */
-+static int cbus_send_bit(struct cbus_host *host, unsigned bit,
-+ unsigned input)
-+{
-+ int ret = 0;
-+
-+ gpio_set_value(host->dat_gpio, bit ? 1 : 0);
-+ gpio_set_value(host->clk_gpio, 1);
-+
-+ /* The data bit is read on the rising edge of CLK */
-+ if (input)
-+ ret = gpio_direction_input(host->dat_gpio);
-+
-+ gpio_set_value(host->clk_gpio, 0);
-+
-+ return ret;
-+}
-+
-+/**
-+ * cbus_send_data - sends @len amount of data over the bus
-+ * @host: the host we're using
-+ * @data: the data to send
-+ * @len: size of the transfer
-+ * @input: whether to set data pin as input after sending
-+ */
-+static int cbus_send_data(struct cbus_host *host, unsigned data, unsigned len,
-+ unsigned input)
-+{
-+ int ret = 0;
-+ int i;
-+
-+ for (i = len; i > 0; i--) {
-+ ret = cbus_send_bit(host, data & (1 << (i - 1)),
-+ input && (i == 1));
-+ if (ret < 0)
-+ goto out;
-+ }
-+
-+out:
-+ return ret;
-+}
-+
-+/**
-+ * cbus_receive_bit - receives one bit from the bus
-+ * @host: the host we're using
-+ */
-+static int cbus_receive_bit(struct cbus_host *host)
-+{
-+ int ret;
-+
-+ gpio_set_value(host->clk_gpio, 1);
-+ ret = gpio_get_value(host->dat_gpio);
-+ if (ret < 0)
-+ goto out;
-+ gpio_set_value(host->clk_gpio, 0);
-+
-+out:
-+ return ret;
-+}
-+
-+/**
-+ * cbus_receive_data - receives @len data from the bus
-+ * @host: the host we're using
-+ * @len: the length of data to receive
-+ */
-+static int cbus_receive_data(struct cbus_host *host, unsigned len)
-+{
-+ int ret = 0;
-+ int i;
-+
-+ for (i = 16; i > 0; i--) {
-+ int bit = cbus_receive_bit(host);
-+
-+ if (bit < 0)
-+ goto out;
-+
-+ if (bit)
-+ ret |= 1 << (i - 1);
-+ }
-+
-+out:
-+ return ret;
-+}
-+
-+/**
-+ * cbus_transfer - transfers data over the bus
-+ * @host: the host we're using
-+ * @rw: read/write flag
-+ * @dev: device address
-+ * @reg: register address
-+ * @data: if @rw == 0 data to send otherwise 0
-+ */
-+static int cbus_transfer(struct cbus_host *host, unsigned rw, unsigned dev,
-+ unsigned reg, unsigned data)
-+{
-+ unsigned long flags;
-+ int input = 0;
-+ int ret = 0;
-+
-+ /* We don't want interrupts disturbing our transfer */
-+ spin_lock_irqsave(&host->lock, flags);
-+
-+ /* Reset state and start of transfer, SEL stays down during transfer */
-+ gpio_set_value(host->sel_gpio, 0);
-+
-+ /* Set the DAT pin to output */
-+ gpio_direction_output(host->dat_gpio, 1);
-+
-+ /* Send the device address */
-+ ret = cbus_send_data(host, dev, 3, 0);
-+ if (ret < 0) {
-+ dev_dbg(host->dev, "failed sending device addr\n");
-+ goto out;
-+ }
-+
-+ /* Send the rw flag */
-+ ret = cbus_send_bit(host, rw, 0);
-+ if (ret < 0) {
-+ dev_dbg(host->dev, "failed sending read/write flag\n");
-+ goto out;
-+ }
-+
-+ /* Send the register address */
-+ if (rw)
-+ input = true;
-+
-+ ret = cbus_send_data(host, reg, 5, input);
-+ if (ret < 0) {
-+ dev_dbg(host->dev, "failed sending register addr\n");
-+ goto out;
-+ }
-+
-+ if (!rw) {
-+ ret = cbus_send_data(host, data, 16, 0);
-+ if (ret < 0) {
-+ dev_dbg(host->dev, "failed sending data\n");
-+ goto out;
-+ }
-+ } else {
-+ gpio_set_value(host->clk_gpio, 1);
-+
-+ ret = cbus_receive_data(host, 16);
-+ if (ret < 0) {
-+ dev_dbg(host->dev, "failed receiving data\n");
-+ goto out;
-+ }
-+ }
-+
-+ /* Indicate end of transfer, SEL goes up until next transfer */
-+ gpio_set_value(host->sel_gpio, 1);
-+ gpio_set_value(host->clk_gpio, 1);
-+ gpio_set_value(host->clk_gpio, 0);
-+
-+out:
-+ spin_unlock_irqrestore(&host->lock, flags);
-+
-+ return ret;
-+}
-+
-+/**
-+ * cbus_read_reg - reads a given register from the device
-+ * @child: the child device
-+ * @dev: device address
-+ * @reg: register address
-+ */
-+int cbus_read_reg(struct device *child, unsigned dev, unsigned reg)
-+{
-+ struct cbus_host *host = dev_get_drvdata(child->parent);
-+
-+ return cbus_transfer(host, CBUS_XFER_READ, dev, reg, 0);
-+}
-+EXPORT_SYMBOL(cbus_read_reg);
-+
-+/**
-+ * cbus_write_reg - writes to a given register of the device
-+ * @child: the child device
-+ * @dev: device address
-+ * @reg: register address
-+ * @val: data to be written to @reg
-+ */
-+int cbus_write_reg(struct device *child, unsigned dev, unsigned reg,
-+ unsigned val)
-+{
-+ struct cbus_host *host = dev_get_drvdata(child->parent);
-+
-+ return cbus_transfer(host, CBUS_XFER_WRITE, dev, reg, val);
-+}
-+EXPORT_SYMBOL(cbus_write_reg);
-+
-+static int __init cbus_bus_probe(struct platform_device *pdev)
-+{
-+ struct cbus_host *chost;
-+ struct cbus_host_platform_data *pdata = pdev->dev.platform_data;
-+ int ret;
-+
-+ chost = kzalloc(sizeof(*chost), GFP_KERNEL);
-+ if (chost == NULL)
-+ return -ENOMEM;
-+
-+ spin_lock_init(&chost->lock);
-+
-+ chost->clk_gpio = pdata->clk_gpio;
-+ chost->dat_gpio = pdata->dat_gpio;
-+ chost->sel_gpio = pdata->sel_gpio;
-+ chost->dev = &pdev->dev;
-+
-+ ret = gpio_request(chost->clk_gpio, "CBUS clk");
-+ if (ret < 0)
-+ goto exit1;
-+
-+ ret = gpio_request(chost->dat_gpio, "CBUS data");
-+ if (ret < 0)
-+ goto exit2;
-+
-+ ret = gpio_request(chost->sel_gpio, "CBUS sel");
-+ if (ret < 0)
-+ goto exit3;
-+
-+ gpio_direction_output(chost->clk_gpio, 0);
-+ gpio_direction_input(chost->dat_gpio);
-+ gpio_direction_output(chost->sel_gpio, 1);
-+
-+ gpio_set_value(chost->clk_gpio, 1);
-+ gpio_set_value(chost->clk_gpio, 0);
-+
-+ platform_set_drvdata(pdev, chost);
-+
-+ return 0;
-+exit3:
-+ gpio_free(chost->dat_gpio);
-+exit2:
-+ gpio_free(chost->clk_gpio);
-+exit1:
-+ kfree(chost);
-+
-+ return ret;
-+}
-+
-+static void __exit cbus_bus_remove(struct platform_device *pdev)
-+{
-+ struct cbus_host *chost = platform_get_drvdata(pdev);
-+
-+ gpio_free(chost->sel_gpio);
-+ gpio_free(chost->dat_gpio);
-+ gpio_free(chost->clk_gpio);
-+
-+ kfree(chost);
-+}
-+
-+static struct platform_driver cbus_driver = {
-+ .remove = __exit_p(cbus_bus_remove),
-+ .driver = {
-+ .name = "cbus",
-+ },
-+};
-+
-+static int __init cbus_bus_init(void)
-+{
-+ return platform_driver_probe(&cbus_driver, cbus_bus_probe);
-+}
-+subsys_initcall(cbus_bus_init);
-+
-+static void __exit cbus_bus_exit(void)
-+{
-+ platform_driver_unregister(&cbus_driver);
-+}
-+module_exit(cbus_bus_exit);
-+
-+MODULE_DESCRIPTION("CBUS serial protocol");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Juha Yrjölä");
-+MODULE_AUTHOR("David Weinehall");
-+MODULE_AUTHOR("Mikko Ylinen");
-+MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
-+
---- /dev/null
-+++ b/drivers/cbus/cbus.h
-@@ -0,0 +1,30 @@
-+/*
-+ * drivers/cbus/cbus.h
-+ *
-+ * Copyright (C) 2004, 2005 Nokia Corporation
-+ *
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and
-+ * David Weinehall <david.weinehall@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __DRIVERS_CBUS_CBUS_H
-+#define __DRIVERS_CBUS_CBUS_H
-+
-+extern int cbus_read_reg(struct device *, unsigned dev, unsigned reg);
-+extern int cbus_write_reg(struct device *, unsigned dev, unsigned reg,
-+ unsigned val);
-+
-+#endif /* __DRIVERS_CBUS_CBUS_H */
---- /dev/null
-+++ b/drivers/cbus/Kconfig
-@@ -0,0 +1,86 @@
-+#
-+# CBUS device configuration
-+#
-+
-+menu "CBUS support"
-+
-+config CBUS
-+ bool "CBUS support on OMAP"
-+ ---help---
-+ CBUS is a proprietary serial protocol by Nokia. It is mainly
-+ used for accessing Energy Management auxiliary chips.
-+
-+ If you want CBUS support, you should say Y here.
-+
-+config CBUS_TAHVO
-+ depends on CBUS
-+ bool "Support for Tahvo"
-+ ---help---
-+ Tahvo is a mixed signal ASIC with some system features
-+
-+ If you want Tahvo support, you should say Y here.
-+
-+if CBUS_TAHVO
-+
-+config CBUS_TAHVO_USB
-+ depends on USB
-+ depends on ARCH_OMAP
-+ select USB_OTG_UTILS
-+ tristate "Support for Tahvo USB transceiver"
-+ ---help---
-+ If you want Tahvo support for USB transceiver, say Y or M here.
-+
-+config CBUS_TAHVO_USB_HOST_BY_DEFAULT
-+ depends on CBUS_TAHVO_USB && USB_OTG
-+ boolean "Device in USB host mode by default"
-+ ---help---
-+ Say Y here, if you want the device to enter USB host mode
-+ by default on bootup.
-+
-+endif # CBUS_TAHVO
-+
-+config CBUS_RETU
-+ depends on CBUS
-+ bool "Support for Retu"
-+ ---help---
-+ Retu is a mixed signal ASIC with some system features
-+
-+ If you want Retu support, you should say Y here.
-+
-+if CBUS_RETU
-+
-+config CBUS_RETU_POWERBUTTON
-+ depends on INPUT
-+ bool "Support for Retu power button"
-+ ---help---
-+ The power button on Nokia 770 is connected to the Retu ASIC.
-+
-+ If you want support for the Retu power button, you should say Y here.
-+
-+config CBUS_RETU_RTC
-+ depends on RTC_CLASS
-+ depends on ARCH_OMAP
-+ tristate "Support for Retu pseudo-RTC"
-+ ---help---
-+ Say Y here if you want support for the device that alleges to be an
-+ RTC in Retu. This will expose a sysfs interface for it.
-+
-+config CBUS_RETU_WDT
-+ depends on SYSFS && WATCHDOG
-+ depends on ARCH_OMAP
-+ tristate "Support for Retu watchdog timer"
-+ ---help---
-+ Say Y here if you want support for the watchdog in Retu. This will
-+ expose a sysfs interface to grok it.
-+
-+config CBUS_RETU_HEADSET
-+ depends on SYSFS
-+ tristate "Support for headset detection with Retu/Vilma"
-+ ---help---
-+ Say Y here if you want support detecting a headset that's connected
-+ to Retu/Vilma. Detection state and events are exposed through
-+ sysfs.
-+
-+endif # CBUS_RETU
-+
-+endmenu
---- /dev/null
-+++ b/drivers/cbus/Makefile
-@@ -0,0 +1,13 @@
-+#
-+# Makefile for CBUS.
-+#
-+
-+obj-$(CONFIG_CBUS) += cbus.o
-+obj-$(CONFIG_CBUS_TAHVO) += tahvo.o
-+obj-$(CONFIG_CBUS_RETU) += retu.o
-+obj-$(CONFIG_CBUS_TAHVO_USB) += tahvo-usb.o
-+
-+obj-$(CONFIG_CBUS_RETU_POWERBUTTON) += retu-pwrbutton.o
-+obj-$(CONFIG_CBUS_RETU_RTC) += retu-rtc.o
-+obj-$(CONFIG_CBUS_RETU_WDT) += retu-wdt.o
-+obj-$(CONFIG_CBUS_RETU_HEADSET) += retu-headset.o
---- /dev/null
-+++ b/drivers/cbus/retu.c
-@@ -0,0 +1,549 @@
-+/**
-+ * drivers/cbus/retu.c
-+ *
-+ * Support functions for Retu ASIC
-+ *
-+ * Copyright (C) 2004, 2005 Nokia Corporation
-+ *
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
-+ * David Weinehall <david.weinehall@nokia.com>, and
-+ * Mikko Ylinen <mikko.k.ylinen@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+
-+#include <linux/slab.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/device.h>
-+#include <linux/mutex.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/platform_data/cbus.h>
-+
-+#include <asm/bitops.h>
-+
-+#include "cbus.h"
-+#include "retu.h"
-+
-+struct retu {
-+ /* Device lock */
-+ struct mutex mutex;
-+ struct device *dev;
-+
-+ int devid;
-+
-+ int irq_base;
-+ int irq_end;
-+
-+ int irq;
-+
-+ int ack;
-+ bool ack_pending;
-+
-+ int mask;
-+ bool mask_pending;
-+
-+ bool is_vilma;
-+};
-+
-+static struct retu *the_retu;
-+
-+/**
-+ * __retu_read_reg - Read a value from a register in Retu
-+ * @retu: pointer to retu structure
-+ * @reg: the register address to read from
-+ */
-+static int __retu_read_reg(struct retu *retu, unsigned reg)
-+{
-+ return cbus_read_reg(retu->dev, retu->devid, reg);
-+}
-+
-+/**
-+ * __retu_write_reg - Writes a value to a register in Retu
-+ * @retu: pointer to retu structure
-+ * @reg: the register address to write to
-+ * @val: the value to write to the register
-+ */
-+static void __retu_write_reg(struct retu *retu, unsigned reg, u16 val)
-+{
-+ cbus_write_reg(retu->dev, retu->devid, reg, val);
-+}
-+
-+/**
-+ * retu_read_reg - Read a value from a register in Retu
-+ * @child: device pointer for the calling child
-+ * @reg: the register to read from
-+ *
-+ * This function returns the contents of the specified register
-+ */
-+int retu_read_reg(struct device *child, unsigned reg)
-+{
-+ struct retu *retu = dev_get_drvdata(child->parent);
-+
-+ return __retu_read_reg(retu, reg);
-+}
-+EXPORT_SYMBOL_GPL(retu_read_reg);
-+
-+/**
-+ * retu_write_reg - Write a value to a register in Retu
-+ * @child: the pointer to our calling child
-+ * @reg: the register to write to
-+ * @val: the value to write to the register
-+ *
-+ * This function writes a value to the specified register
-+ */
-+void retu_write_reg(struct device *child, unsigned reg, u16 val)
-+{
-+ struct retu *retu = dev_get_drvdata(child->parent);
-+
-+ mutex_lock(&retu->mutex);
-+ __retu_write_reg(retu, reg, val);
-+ mutex_unlock(&retu->mutex);
-+}
-+EXPORT_SYMBOL_GPL(retu_write_reg);
-+
-+/**
-+ * retu_set_clear_reg_bits - helper function to read/set/clear bits
-+ * @child: device pointer to calling child
-+ * @reg: the register address
-+ * @set: mask for setting bits
-+ * @clear: mask for clearing bits
-+ */
-+void retu_set_clear_reg_bits(struct device *child, unsigned reg, u16 set,
-+ u16 clear)
-+{
-+ struct retu *retu = dev_get_drvdata(child->parent);
-+ u16 w;
-+
-+ mutex_lock(&retu->mutex);
-+ w = __retu_read_reg(retu, reg);
-+ w &= ~clear;
-+ w |= set;
-+ __retu_write_reg(retu, reg, w);
-+ mutex_unlock(&retu->mutex);
-+}
-+EXPORT_SYMBOL_GPL(retu_set_clear_reg_bits);
-+
-+#define ADC_MAX_CHAN_NUMBER 13
-+
-+/**
-+ * retu_read_adc - Reads AD conversion result
-+ * @child: device pointer to calling child
-+ * @channel: the ADC channel to read from
-+ */
-+int retu_read_adc(struct device *child, int channel)
-+{
-+ struct retu *retu = dev_get_drvdata(child->parent);
-+ int res;
-+
-+ if (!retu)
-+ return -ENODEV;
-+
-+ if (channel < 0 || channel > ADC_MAX_CHAN_NUMBER)
-+ return -EINVAL;
-+
-+ mutex_lock(&retu->mutex);
-+
-+ if ((channel == 8) && retu->is_vilma) {
-+ int scr = __retu_read_reg(retu, RETU_REG_ADCSCR);
-+ int ch = (__retu_read_reg(retu, RETU_REG_ADCR) >> 10) & 0xf;
-+ if (((scr & 0xff) != 0) && (ch != 8))
-+ __retu_write_reg(retu, RETU_REG_ADCSCR, (scr & ~0xff));
-+ }
-+
-+ /* Select the channel and read result */
-+ __retu_write_reg(retu, RETU_REG_ADCR, channel << 10);
-+ res = __retu_read_reg(retu, RETU_REG_ADCR) & 0x3ff;
-+
-+ if (retu->is_vilma)
-+ __retu_write_reg(retu, RETU_REG_ADCR, (1 << 13));
-+
-+ /* Unlock retu */
-+ mutex_unlock(&retu->mutex);
-+
-+ return res;
-+}
-+EXPORT_SYMBOL_GPL(retu_read_adc);
-+
-+static irqreturn_t retu_irq_handler(int irq, void *_retu)
-+{
-+ struct retu *retu = _retu;
-+
-+ u16 idr;
-+ u16 imr;
-+
-+ mutex_lock(&retu->mutex);
-+ idr = __retu_read_reg(retu, RETU_REG_IDR);
-+ imr = __retu_read_reg(retu, RETU_REG_IMR);
-+ mutex_unlock(&retu->mutex);
-+
-+ idr &= ~imr;
-+ if (!idr) {
-+ dev_vdbg(retu->dev, "No IRQ, spurious?\n");
-+ return IRQ_NONE;
-+ }
-+
-+ while (idr) {
-+ unsigned long pending = __ffs(idr);
-+ unsigned int irq;
-+
-+ idr &= ~BIT(pending);
-+ irq = pending + retu->irq_base;
-+ handle_nested_irq(irq);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/* -------------------------------------------------------------------------- */
-+
-+static void retu_irq_mask(struct irq_data *data)
-+{
-+ struct retu *retu = irq_data_get_irq_chip_data(data);
-+ int irq = data->irq;
-+
-+ retu->mask |= (1 << (irq - retu->irq_base));
-+ retu->mask_pending = true;
-+}
-+
-+static void retu_irq_unmask(struct irq_data *data)
-+{
-+ struct retu *retu = irq_data_get_irq_chip_data(data);
-+ int irq = data->irq;
-+
-+ retu->mask &= ~(1 << (irq - retu->irq_base));
-+ retu->mask_pending = true;
-+
-+}
-+
-+static void retu_irq_ack(struct irq_data *data)
-+{
-+ struct retu *retu = irq_data_get_irq_chip_data(data);
-+ int irq = data->irq;
-+
-+ retu->ack |= (1 << (irq - retu->irq_base));
-+ retu->ack_pending = true;
-+}
-+
-+static void retu_bus_lock(struct irq_data *data)
-+{
-+ struct retu *retu = irq_data_get_irq_chip_data(data);
-+
-+ mutex_lock(&retu->mutex);
-+}
-+
-+static void retu_bus_sync_unlock(struct irq_data *data)
-+{
-+ struct retu *retu = irq_data_get_irq_chip_data(data);
-+
-+ if (retu->mask_pending) {
-+ __retu_write_reg(retu, RETU_REG_IMR, retu->mask);
-+ retu->mask_pending = false;
-+ }
-+
-+ if (retu->ack_pending) {
-+ __retu_write_reg(retu, RETU_REG_IDR, retu->ack);
-+ retu->ack_pending = false;
-+ }
-+
-+ mutex_unlock(&retu->mutex);
-+}
-+
-+static struct irq_chip retu_irq_chip = {
-+ .name = "retu",
-+ .irq_bus_lock = retu_bus_lock,
-+ .irq_bus_sync_unlock = retu_bus_sync_unlock,
-+ .irq_mask = retu_irq_mask,
-+ .irq_unmask = retu_irq_unmask,
-+ .irq_ack = retu_irq_ack,
-+};
-+
-+static inline void retu_irq_setup(int irq)
-+{
-+#ifdef CONFIG_ARM
-+ set_irq_flags(irq, IRQF_VALID);
-+#else
-+ irq_set_noprobe(irq);
-+#endif
-+}
-+
-+static void retu_irq_init(struct retu *retu)
-+{
-+ int base = retu->irq_base;
-+ int end = retu->irq_end;
-+ int irq;
-+
-+ for (irq = base; irq < end; irq++) {
-+ irq_set_chip_data(irq, retu);
-+ irq_set_chip_and_handler(irq, &retu_irq_chip,
-+ handle_simple_irq);
-+ irq_set_nested_thread(irq, 1);
-+ retu_irq_setup(irq);
-+ }
-+}
-+
-+static void retu_irq_exit(struct retu *retu)
-+{
-+ int base = retu->irq_base;
-+ int end = retu->irq_end;
-+ int irq;
-+
-+ for (irq = base; irq < end; irq++) {
-+#ifdef CONFIG_ARM
-+ set_irq_flags(irq, 0);
-+#endif
-+ irq_set_chip_and_handler(irq, NULL, NULL);
-+ irq_set_chip_data(irq, NULL);
-+ }
-+}
-+
-+/* -------------------------------------------------------------------------- */
-+
-+/**
-+ * retu_power_off - Shut down power to system
-+ *
-+ * This function puts the system in power off state
-+ */
-+static void retu_power_off(void)
-+{
-+ struct retu *retu = the_retu;
-+ unsigned reg;
-+
-+ reg = __retu_read_reg(retu, RETU_REG_CC1);
-+
-+ /* Ignore power button state */
-+ __retu_write_reg(retu, RETU_REG_CC1, reg | 2);
-+ /* Expire watchdog immediately */
-+ __retu_write_reg(retu, RETU_REG_WATCHDOG, 0);
-+ /* Wait for poweroff*/
-+ for (;;);
-+}
-+
-+static struct resource generic_resources[] = {
-+ {
-+ .start = -EINVAL, /* fixed later */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ {
-+ .start = -EINVAL, /* fixed later */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+/**
-+ * retu_allocate_child - Allocates one Retu child
-+ * @name: name of new child
-+ * @parent: parent device for this child
-+ */
-+static struct device *retu_allocate_child(char *name, struct device *parent,
-+ int irq_base, int irq1, int irq2, int num)
-+{
-+ struct platform_device *pdev;
-+ int status;
-+
-+ pdev = platform_device_alloc(name, -1);
-+ if (!pdev) {
-+ dev_dbg(parent, "can't allocate %s\n", name);
-+ goto err;
-+ }
-+
-+ pdev->dev.parent = parent;
-+
-+ if (num) {
-+ generic_resources[0].start = irq_base + irq1;
-+ generic_resources[1].start = irq_base + irq2;
-+
-+ status = platform_device_add_resources(pdev,
-+ generic_resources, num);
-+ if (status < 0) {
-+ dev_dbg(parent, "can't add resources to %s\n", name);
-+ goto err;
-+ }
-+ }
-+
-+ status = platform_device_add(pdev);
-+ if (status < 0) {
-+ dev_dbg(parent, "can't add %s\n", name);
-+ goto err;
-+ }
-+
-+ return &pdev->dev;
-+
-+err:
-+ platform_device_put(pdev);
-+
-+ return NULL;
-+}
-+
-+/**
-+ * retu_allocate_children - Allocates Retu's children
-+ */
-+static int retu_allocate_children(struct device *parent, int irq_base)
-+{
-+ struct device *child;
-+
-+ child = retu_allocate_child("retu-pwrbutton", parent, irq_base,
-+ RETU_INT_PWR, -1, 1);
-+ if (!child)
-+ return -ENOMEM;
-+
-+ child = retu_allocate_child("retu-headset", parent, irq_base,
-+ RETU_INT_HOOK, -1, 1);
-+ if (!child)
-+ return -ENOMEM;
-+
-+ child = retu_allocate_child("retu-rtc", parent, irq_base,
-+ RETU_INT_RTCS, RETU_INT_RTCA, 2);
-+ if (!child)
-+ return -ENOMEM;
-+
-+ child = retu_allocate_child("retu-wdt", parent, -1, -1, -1, 0);
-+ if (!child)
-+ return -ENOMEM;
-+
-+ return 0;
-+}
-+
-+/**
-+ * retu_probe - Probe for Retu ASIC
-+ * @dev: the Retu device
-+ *
-+ * Probe for the Retu ASIC and allocate memory
-+ * for its device-struct if found
-+ */
-+static int __devinit retu_probe(struct platform_device *pdev)
-+{
-+ struct retu *retu;
-+ struct cbus_retu_platform_data *pdata = pdev->dev.platform_data;
-+
-+ int ret = -ENOMEM;
-+ int rev;
-+
-+ retu = kzalloc(sizeof(*retu), GFP_KERNEL);
-+ if (!retu) {
-+ dev_err(&pdev->dev, "not enough memory\n");
-+ goto err0;
-+ }
-+
-+ platform_set_drvdata(pdev, retu);
-+
-+ ret = irq_alloc_descs(-1, 0, MAX_RETU_IRQ_HANDLERS, 0);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "failed to allocate IRQ descs\n");
-+ goto err1;
-+ }
-+
-+ retu->irq = platform_get_irq(pdev, 0);
-+ retu->irq_base = ret;
-+ retu->irq_end = ret + MAX_RETU_IRQ_HANDLERS;
-+ retu->devid = pdata->devid;
-+ retu->dev = &pdev->dev;
-+ the_retu = retu;
-+
-+ mutex_init(&retu->mutex);
-+
-+ retu_irq_init(retu);
-+
-+ rev = __retu_read_reg(retu, RETU_REG_ASICR) & 0xff;
-+ if (rev & (1 << 7))
-+ retu->is_vilma = true;
-+
-+ dev_info(&pdev->dev, "%s v%d.%d found\n",
-+ retu->is_vilma ? "Vilma" : "Retu",
-+ (rev >> 4) & 0x07, rev & 0x0f);
-+
-+ /* Mask all RETU interrupts */
-+ __retu_write_reg(retu, RETU_REG_IMR, 0xffff);
-+
-+ ret = request_threaded_irq(retu->irq, NULL, retu_irq_handler,
-+ IRQF_ONESHOT, "retu", retu);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "Unable to register IRQ handler\n");
-+ goto err2;
-+ }
-+
-+ irq_set_irq_wake(retu->irq, 1);
-+
-+ /* Register power off function */
-+ pm_power_off = retu_power_off;
-+
-+ ret = retu_allocate_children(&pdev->dev, retu->irq_base);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "Unable to allocate Retu children\n");
-+ goto err3;
-+ }
-+
-+ return 0;
-+
-+err3:
-+ pm_power_off = NULL;
-+ free_irq(retu->irq, retu);
-+
-+err2:
-+ retu_irq_exit(retu);
-+ irq_free_descs(retu->irq_base, MAX_RETU_IRQ_HANDLERS);
-+
-+err1:
-+ kfree(retu);
-+ the_retu = NULL;
-+
-+err0:
-+ return ret;
-+}
-+
-+static int __devexit retu_remove(struct platform_device *pdev)
-+{
-+ struct retu *retu = platform_get_drvdata(pdev);
-+
-+ pm_power_off = NULL;
-+ the_retu = NULL;
-+
-+ free_irq(retu->irq, retu);
-+ retu_irq_exit(retu);
-+ irq_free_descs(retu->irq_base, MAX_RETU_IRQ_HANDLERS);
-+ kfree(retu);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver retu_driver = {
-+ .probe = retu_probe,
-+ .remove = __devexit_p(retu_remove),
-+ .driver = {
-+ .name = "retu",
-+ },
-+};
-+
-+static int __init retu_init(void)
-+{
-+ return platform_driver_register(&retu_driver);
-+}
-+subsys_initcall(retu_init);
-+
-+static void __exit retu_exit(void)
-+{
-+ platform_driver_unregister(&retu_driver);
-+}
-+module_exit(retu_exit);
-+
-+MODULE_DESCRIPTION("Retu ASIC control");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Juha Yrjölä");
-+MODULE_AUTHOR("David Weinehall");
-+MODULE_AUTHOR("Mikko Ylinen");
---- /dev/null
-+++ b/drivers/cbus/retu.h
-@@ -0,0 +1,85 @@
-+/**
-+ * drivers/cbus/retu.h
-+ *
-+ * Copyright (C) 2004, 2005 Nokia Corporation
-+ *
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and
-+ * David Weinehall <david.weinehall@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __DRIVERS_CBUS_RETU_H
-+#define __DRIVERS_CBUS_RETU_H
-+
-+#include <linux/types.h>
-+
-+/* Registers */
-+#define RETU_REG_ASICR 0x00 /* ASIC ID & revision */
-+#define RETU_REG_IDR 0x01 /* Interrupt ID */
-+#define RETU_REG_IMR 0x02 /* Interrupt mask */
-+#define RETU_REG_RTCDSR 0x03 /* RTC seconds register */
-+#define RETU_REG_RTCHMR 0x04 /* RTC hours and minutes register */
-+#define RETU_REG_RTCHMAR 0x05 /* RTC hours and minutes alarm and time set register */
-+#define RETU_REG_RTCCALR 0x06 /* RTC calibration register */
-+#define RETU_REG_ADCR 0x08 /* ADC result */
-+#define RETU_REG_ADCSCR 0x09 /* ADC sample ctrl */
-+#define RETU_REG_CC1 0x0d /* Common control register 1 */
-+#define RETU_REG_CC2 0x0e /* Common control register 2 */
-+#define RETU_REG_CTRL_CLR 0x0f /* Regulator clear register */
-+#define RETU_REG_CTRL_SET 0x10 /* Regulator set register */
-+#define RETU_REG_STATUS 0x16 /* Status register */
-+#define RETU_REG_STATUS_BATAVAIL 0x0100 /* Battery available */
-+#define RETU_REG_STATUS_CHGPLUG 0x1000 /* Charger is plugged in */
-+#define RETU_REG_WATCHDOG 0x17 /* Watchdog register */
-+#define RETU_REG_AUDTXR 0x18 /* Audio Codec Tx register */
-+#define RETU_REG_MAX 0x1f
-+
-+/* Interrupt sources */
-+#define RETU_INT_PWR 0
-+#define RETU_INT_CHAR 1
-+#define RETU_INT_RTCS 2
-+#define RETU_INT_RTCM 3
-+#define RETU_INT_RTCD 4
-+#define RETU_INT_RTCA 5
-+#define RETU_INT_HOOK 6
-+#define RETU_INT_HEAD 7
-+#define RETU_INT_ADCS 8
-+
-+#define MAX_RETU_IRQ_HANDLERS 16
-+
-+/* ADC channels */
-+#define RETU_ADC_GND 0x00 /* Ground */
-+#define RETU_ADC_BSI 0x01 /* Battery Size Indicator */
-+#define RETU_ADC_BATTEMP 0x02 /* Battery temperature */
-+#define RETU_ADC_CHGVOLT 0x03 /* Charger voltage */
-+#define RETU_ADC_HEADSET 0x04 /* Headset detection */
-+#define RETU_ADC_HOOKDET 0x05 /* Hook detection */
-+#define RETU_ADC_RFGP 0x06 /* RF GP */
-+#define RETU_ADC_WBTX 0x07 /* Wideband Tx detection */
-+#define RETU_ADC_BATTVOLT 0x08 /* Battery voltage measurement */
-+#define RETU_ADC_GND2 0x09 /* Ground */
-+#define RETU_ADC_LIGHTSENS 0x0A /* Light sensor */
-+#define RETU_ADC_LIGHTTEMP 0x0B /* Light sensor temperature */
-+#define RETU_ADC_BKUPVOLT 0x0C /* Backup battery voltage */
-+#define RETU_ADC_TEMP 0x0D /* RETU temperature */
-+
-+
-+int retu_read_reg(struct device *child, unsigned reg);
-+void retu_write_reg(struct device *child, unsigned reg, u16 val);
-+void retu_set_clear_reg_bits(struct device *child, unsigned reg, u16 set,
-+ u16 clear);
-+int retu_read_adc(struct device *child, int channel);
-+
-+#endif /* __DRIVERS_CBUS_RETU_H */
---- /dev/null
-+++ b/drivers/cbus/retu-headset.c
-@@ -0,0 +1,359 @@
-+/**
-+ * Retu/Vilma headset detection
-+ *
-+ * Copyright (C) 2006 Nokia Corporation
-+ *
-+ * Written by Juha Yrjölä
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+#include <linux/input.h>
-+#include <linux/platform_device.h>
-+
-+#include "retu.h"
-+
-+#define RETU_ADC_CHANNEL_HOOKDET 0x05
-+
-+#define RETU_HEADSET_KEY KEY_PHONE
-+
-+struct retu_headset {
-+ spinlock_t lock;
-+ struct mutex mutex;
-+ struct device *dev;
-+ struct input_dev *idev;
-+ unsigned bias_enabled;
-+ unsigned detection_enabled;
-+ unsigned pressed;
-+ struct timer_list enable_timer;
-+ struct timer_list detect_timer;
-+ int irq;
-+};
-+
-+static void retu_headset_set_bias(struct retu_headset *hs, int enable)
-+{
-+ if (enable) {
-+ retu_set_clear_reg_bits(hs->dev, RETU_REG_AUDTXR,
-+ (1 << 0) | (1 << 1), 0);
-+ msleep(2);
-+ retu_set_clear_reg_bits(hs->dev, RETU_REG_AUDTXR,
-+ 1 << 3, 0);
-+ } else {
-+ retu_set_clear_reg_bits(hs->dev, RETU_REG_AUDTXR, 0,
-+ (1 << 0) | (1 << 1) | (1 << 3));
-+ }
-+}
-+
-+static void retu_headset_enable(struct retu_headset *hs)
-+{
-+ mutex_lock(&hs->mutex);
-+ if (!hs->bias_enabled) {
-+ hs->bias_enabled = 1;
-+ retu_headset_set_bias(hs, 1);
-+ }
-+ mutex_unlock(&hs->mutex);
-+}
-+
-+static void retu_headset_disable(struct retu_headset *hs)
-+{
-+ mutex_lock(&hs->mutex);
-+ if (hs->bias_enabled) {
-+ hs->bias_enabled = 0;
-+ retu_headset_set_bias(hs, 0);
-+ }
-+ mutex_unlock(&hs->mutex);
-+}
-+
-+static void retu_headset_det_enable(struct retu_headset *hs)
-+{
-+ mutex_lock(&hs->mutex);
-+ if (!hs->detection_enabled) {
-+ hs->detection_enabled = 1;
-+ retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1,
-+ (1 << 10) | (1 << 8), 0);
-+ }
-+ mutex_unlock(&hs->mutex);
-+}
-+
-+static void retu_headset_det_disable(struct retu_headset *hs)
-+{
-+ unsigned long flags;
-+
-+ mutex_lock(&hs->mutex);
-+ if (hs->detection_enabled) {
-+ hs->detection_enabled = 0;
-+ del_timer_sync(&hs->enable_timer);
-+ del_timer_sync(&hs->detect_timer);
-+ spin_lock_irqsave(&hs->lock, flags);
-+ if (hs->pressed)
-+ input_report_key(hs->idev, RETU_HEADSET_KEY, 0);
-+ spin_unlock_irqrestore(&hs->lock, flags);
-+ retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1, 0,
-+ (1 << 10) | (1 << 8));
-+ }
-+ mutex_unlock(&hs->mutex);
-+}
-+
-+static ssize_t retu_headset_hookdet_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ int val;
-+
-+ val = retu_read_adc(dev, RETU_ADC_CHANNEL_HOOKDET);
-+ return sprintf(buf, "%d\n", val);
-+}
-+
-+static DEVICE_ATTR(hookdet, S_IRUGO, retu_headset_hookdet_show, NULL);
-+
-+static ssize_t retu_headset_enable_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct retu_headset *hs = dev_get_drvdata(dev);
-+
-+ return sprintf(buf, "%u\n", hs->bias_enabled);
-+}
-+
-+static ssize_t retu_headset_enable_store(struct device *dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ struct retu_headset *hs = dev_get_drvdata(dev);
-+ int enable;
-+
-+ if (sscanf(buf, "%u", &enable) != 1)
-+ return -EINVAL;
-+ if (enable)
-+ retu_headset_enable(hs);
-+ else
-+ retu_headset_disable(hs);
-+ return count;
-+}
-+
-+static DEVICE_ATTR(enable, S_IRUGO | S_IWUSR | S_IWGRP,
-+ retu_headset_enable_show, retu_headset_enable_store);
-+
-+static ssize_t retu_headset_enable_det_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct retu_headset *hs = dev_get_drvdata(dev);
-+
-+ return sprintf(buf, "%u\n", hs->detection_enabled);
-+}
-+
-+static ssize_t retu_headset_enable_det_store(struct device *dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ struct retu_headset *hs = dev_get_drvdata(dev);
-+ int enable;
-+
-+ if (sscanf(buf, "%u", &enable) != 1)
-+ return -EINVAL;
-+ if (enable)
-+ retu_headset_det_enable(hs);
-+ else
-+ retu_headset_det_disable(hs);
-+ return count;
-+}
-+
-+static DEVICE_ATTR(enable_det, S_IRUGO | S_IWUSR | S_IWGRP,
-+ retu_headset_enable_det_show,
-+ retu_headset_enable_det_store);
-+
-+static irqreturn_t retu_headset_hook_interrupt(int irq, void *_hs)
-+{
-+ struct retu_headset *hs = _hs;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&hs->lock, flags);
-+ if (!hs->pressed) {
-+ /* Headset button was just pressed down. */
-+ hs->pressed = 1;
-+ input_report_key(hs->idev, RETU_HEADSET_KEY, 1);
-+ }
-+ spin_unlock_irqrestore(&hs->lock, flags);
-+ retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1, 0,
-+ (1 << 10) | (1 << 8));
-+ mod_timer(&hs->enable_timer, jiffies + msecs_to_jiffies(50));
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void retu_headset_enable_timer(unsigned long arg)
-+{
-+ struct retu_headset *hs = (struct retu_headset *) arg;
-+
-+ retu_set_clear_reg_bits(hs->dev, RETU_REG_CC1,
-+ (1 << 10) | (1 << 8), 0);
-+ mod_timer(&hs->detect_timer, jiffies + msecs_to_jiffies(350));
-+}
-+
-+static void retu_headset_detect_timer(unsigned long arg)
-+{
-+ struct retu_headset *hs = (struct retu_headset *) arg;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&hs->lock, flags);
-+ if (hs->pressed) {
-+ hs->pressed = 0;
-+ input_report_key(hs->idev, RETU_HEADSET_KEY, 0);
-+ }
-+ spin_unlock_irqrestore(&hs->lock, flags);
-+}
-+
-+static int __init retu_headset_probe(struct platform_device *pdev)
-+{
-+ struct retu_headset *hs;
-+ int irq;
-+ int r;
-+
-+ hs = kzalloc(sizeof(*hs), GFP_KERNEL);
-+ if (hs == NULL)
-+ return -ENOMEM;
-+
-+ hs->dev = &pdev->dev;
-+
-+ hs->idev = input_allocate_device();
-+ if (hs->idev == NULL) {
-+ r = -ENOMEM;
-+ goto err1;
-+ }
-+ hs->idev->name = "retu-headset";
-+ hs->idev->dev.parent = &pdev->dev;
-+ set_bit(EV_KEY, hs->idev->evbit);
-+ set_bit(RETU_HEADSET_KEY, hs->idev->keybit);
-+ r = input_register_device(hs->idev);
-+ if (r < 0)
-+ goto err2;
-+
-+ r = device_create_file(&pdev->dev, &dev_attr_hookdet);
-+ if (r < 0)
-+ goto err3;
-+ r = device_create_file(&pdev->dev, &dev_attr_enable);
-+ if (r < 0)
-+ goto err4;
-+ r = device_create_file(&pdev->dev, &dev_attr_enable_det);
-+ if (r < 0)
-+ goto err5;
-+ platform_set_drvdata(pdev, hs);
-+
-+ spin_lock_init(&hs->lock);
-+ mutex_init(&hs->mutex);
-+ setup_timer(&hs->enable_timer, retu_headset_enable_timer,
-+ (unsigned long) hs);
-+ setup_timer(&hs->detect_timer, retu_headset_detect_timer,
-+ (unsigned long) hs);
-+
-+ irq = platform_get_irq(pdev, 0);
-+ hs->irq = irq;
-+
-+ r = request_threaded_irq(irq, NULL, retu_headset_hook_interrupt, 0,
-+ "hookdet", hs);
-+ if (r != 0) {
-+ dev_err(&pdev->dev, "hookdet IRQ not available\n");
-+ goto err6;
-+ }
-+
-+ return 0;
-+err6:
-+ device_remove_file(&pdev->dev, &dev_attr_enable_det);
-+err5:
-+ device_remove_file(&pdev->dev, &dev_attr_enable);
-+err4:
-+ device_remove_file(&pdev->dev, &dev_attr_hookdet);
-+err3:
-+ input_unregister_device(hs->idev);
-+err2:
-+ input_free_device(hs->idev);
-+err1:
-+ kfree(hs);
-+ return r;
-+}
-+
-+static int retu_headset_remove(struct platform_device *pdev)
-+{
-+ struct retu_headset *hs = platform_get_drvdata(pdev);
-+
-+ device_remove_file(&pdev->dev, &dev_attr_hookdet);
-+ device_remove_file(&pdev->dev, &dev_attr_enable);
-+ device_remove_file(&pdev->dev, &dev_attr_enable_det);
-+ retu_headset_disable(hs);
-+ retu_headset_det_disable(hs);
-+ free_irq(hs->irq, hs);
-+ input_unregister_device(hs->idev);
-+ input_free_device(hs->idev);
-+
-+ return 0;
-+}
-+
-+static int retu_headset_suspend(struct platform_device *pdev,
-+ pm_message_t mesg)
-+{
-+ struct retu_headset *hs = platform_get_drvdata(pdev);
-+
-+ mutex_lock(&hs->mutex);
-+ if (hs->bias_enabled)
-+ retu_headset_set_bias(hs, 0);
-+ mutex_unlock(&hs->mutex);
-+
-+ return 0;
-+}
-+
-+static int retu_headset_resume(struct platform_device *pdev)
-+{
-+ struct retu_headset *hs = platform_get_drvdata(pdev);
-+
-+ mutex_lock(&hs->mutex);
-+ if (hs->bias_enabled)
-+ retu_headset_set_bias(hs, 1);
-+ mutex_unlock(&hs->mutex);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver retu_headset_driver = {
-+ .remove = retu_headset_remove,
-+ .suspend = retu_headset_suspend,
-+ .resume = retu_headset_resume,
-+ .driver = {
-+ .name = "retu-headset",
-+ },
-+};
-+
-+static int __init retu_headset_init(void)
-+{
-+ return platform_driver_probe(&retu_headset_driver, retu_headset_probe);
-+}
-+
-+static void __exit retu_headset_exit(void)
-+{
-+ platform_driver_unregister(&retu_headset_driver);
-+}
-+
-+module_init(retu_headset_init);
-+module_exit(retu_headset_exit);
-+
-+MODULE_DESCRIPTION("Retu/Vilma headset detection");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Juha Yrjölä");
---- /dev/null
-+++ b/drivers/cbus/retu-pwrbutton.c
-@@ -0,0 +1,165 @@
-+/**
-+ * drivers/cbus/retu-pwrbutton.c
-+ *
-+ * Driver for sending retu power button event to input-layer
-+ *
-+ * Copyright (C) 2004-2010 Nokia Corporation
-+ *
-+ * Written by
-+ * Ari Saastamoinen <ari.saastamoinen@elektrobit.com>
-+ * Juha Yrjola <juha.yrjola@solidboot.com>
-+ *
-+ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/input.h>
-+#include <linux/jiffies.h>
-+#include <linux/bitops.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+#include "retu.h"
-+
-+#define RETU_STATUS_PWRONX (1 << 5)
-+
-+#define PWRBTN_DELAY 20
-+#define PWRBTN_UP 0
-+#define PWRBTN_PRESSED 1
-+
-+struct retu_pwrbutton {
-+ struct input_dev *idev;
-+ struct device *dev;
-+
-+ int state;
-+ int irq;
-+};
-+
-+static irqreturn_t retubutton_irq(int irq, void *_pwr)
-+{
-+ struct retu_pwrbutton *pwr = _pwr;
-+ int state;
-+
-+ if (retu_read_reg(pwr->dev, RETU_REG_STATUS) & RETU_STATUS_PWRONX)
-+ state = PWRBTN_UP;
-+ else
-+ state = PWRBTN_PRESSED;
-+
-+ if (pwr->state != state) {
-+ input_report_key(pwr->idev, KEY_POWER, state);
-+ input_sync(pwr->idev);
-+ pwr->state = state;
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init retubutton_probe(struct platform_device *pdev)
-+{
-+ struct retu_pwrbutton *pwr;
-+ int ret = 0;
-+
-+ pwr = kzalloc(sizeof(*pwr), GFP_KERNEL);
-+ if (!pwr) {
-+ dev_err(&pdev->dev, "not enough memory\n");
-+ ret = -ENOMEM;
-+ goto err0;
-+ }
-+
-+ pwr->dev = &pdev->dev;
-+ pwr->irq = platform_get_irq(pdev, 0);
-+ platform_set_drvdata(pdev, pwr);
-+
-+ ret = request_threaded_irq(pwr->irq, NULL, retubutton_irq, 0,
-+ "retu-pwrbutton", pwr);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "Cannot allocate irq\n");
-+ goto err1;
-+ }
-+
-+ pwr->idev = input_allocate_device();
-+ if (!pwr->idev) {
-+ dev_err(&pdev->dev, "can't allocate input device\n");
-+ ret = -ENOMEM;
-+ goto err2;
-+ }
-+
-+ pwr->idev->evbit[0] = BIT_MASK(EV_KEY);
-+ pwr->idev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
-+ pwr->idev->name = "retu-pwrbutton";
-+
-+ ret = input_register_device(pwr->idev);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "failed to register input device\n");
-+ goto err3;
-+ }
-+
-+ return 0;
-+
-+err3:
-+ input_free_device(pwr->idev);
-+
-+err2:
-+ free_irq(pwr->irq, pwr);
-+
-+err1:
-+ kfree(pwr);
-+
-+err0:
-+ return ret;
-+}
-+
-+static int __exit retubutton_remove(struct platform_device *pdev)
-+{
-+ struct retu_pwrbutton *pwr = platform_get_drvdata(pdev);
-+
-+ free_irq(pwr->irq, pwr);
-+ input_unregister_device(pwr->idev);
-+ input_free_device(pwr->idev);
-+ kfree(pwr);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver retu_pwrbutton_driver = {
-+ .remove = __exit_p(retubutton_remove),
-+ .driver = {
-+ .name = "retu-pwrbutton",
-+ },
-+};
-+
-+static int __init retubutton_init(void)
-+{
-+ return platform_driver_probe(&retu_pwrbutton_driver, retubutton_probe);
-+}
-+module_init(retubutton_init);
-+
-+static void __exit retubutton_exit(void)
-+{
-+ platform_driver_unregister(&retu_pwrbutton_driver);
-+}
-+module_exit(retubutton_exit);
-+
-+MODULE_DESCRIPTION("Retu Power Button");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Ari Saastamoinen");
-+MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
-+
---- /dev/null
-+++ b/drivers/cbus/retu-rtc.c
-@@ -0,0 +1,287 @@
-+/**
-+ * drivers/cbus/retu-rtc.c
-+ *
-+ * Support for Retu RTC
-+ *
-+ * Copyright (C) 2004, 2005 Nokia Corporation
-+ *
-+ * Written by Paul Mundt <paul.mundt@nokia.com> and
-+ * Igor Stoppa <igor.stoppa@nokia.com>
-+ *
-+ * The Retu RTC is essentially a partial read-only RTC that gives us Retu's
-+ * idea of what time actually is. It's left as a userspace excercise to map
-+ * this back to time in the real world and ensure that calibration settings
-+ * are sane to compensate for any horrible drift (on account of not being able
-+ * to set the clock to anything).
-+ *
-+ * Days are semi-writeable. Namely, Retu will only track 255 days for us
-+ * consecutively, after which the counter is explicitly stuck at 255 until
-+ * someone comes along and clears it with a write. In the event that no one
-+ * comes along and clears it, we no longer have any idea what day it is.
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/mutex.h>
-+#include <linux/rtc.h>
-+
-+#include "cbus.h"
-+#include "retu.h"
-+
-+struct retu_rtc {
-+ /* device lock */
-+ struct mutex mutex;
-+ struct device *dev;
-+ struct rtc_device *rtc;
-+
-+ u16 alarm_expired;
-+ int irq_rtcs;
-+ int irq_rtca;
-+};
-+
-+static void retu_rtc_do_reset(struct retu_rtc *rtc)
-+{
-+ u16 ccr1;
-+
-+ ccr1 = retu_read_reg(rtc->dev, RETU_REG_CC1);
-+ /* RTC in reset */
-+ retu_write_reg(rtc->dev, RETU_REG_CC1, ccr1 | 0x0001);
-+ /* RTC in normal operating mode */
-+ retu_write_reg(rtc->dev, RETU_REG_CC1, ccr1 & ~0x0001);
-+
-+ /* Disable alarm and RTC WD */
-+ retu_write_reg(rtc->dev, RETU_REG_RTCHMAR, 0x7f3f);
-+ /* Set Calibration register to default value */
-+ retu_write_reg(rtc->dev, RETU_REG_RTCCALR, 0x00c0);
-+
-+ rtc->alarm_expired = 0;
-+}
-+
-+static irqreturn_t retu_rtc_interrupt(int irq, void *_rtc)
-+{
-+ struct retu_rtc *rtc = _rtc;
-+
-+ mutex_lock(&rtc->mutex);
-+ rtc->alarm_expired = 1;
-+ retu_write_reg(rtc->dev, RETU_REG_RTCHMAR, (24 << 8) | 60);
-+ mutex_unlock(&rtc->mutex);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int retu_rtc_init_irq(struct retu_rtc *rtc)
-+{
-+ int irq;
-+ int ret;
-+
-+ irq = platform_get_irq(to_platform_device(rtc->dev), 0);
-+ rtc->irq_rtcs = irq;
-+
-+ irq = platform_get_irq(to_platform_device(rtc->dev), 1);
-+ rtc->irq_rtca = irq;
-+
-+ ret = request_threaded_irq(rtc->irq_rtcs, NULL, retu_rtc_interrupt,
-+ 0, "RTCS", rtc);
-+ if (ret != 0)
-+ return ret;
-+
-+ ret = request_threaded_irq(rtc->irq_rtca, NULL, retu_rtc_interrupt,
-+ 0, "RTCA", rtc);
-+ if (ret != 0) {
-+ free_irq(rtc->irq_rtcs, rtc);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int retu_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
-+{
-+ struct retu_rtc *rtc = dev_get_drvdata(dev);
-+ u16 chmar;
-+
-+ mutex_lock(&rtc->mutex);
-+
-+ chmar = ((alm->time.tm_hour & 0x1f) << 8) | (alm->time.tm_min & 0x3f);
-+ retu_write_reg(rtc->dev, RETU_REG_RTCHMAR, chmar);
-+
-+ mutex_unlock(&rtc->mutex);
-+
-+ return 0;
-+}
-+
-+static int retu_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
-+{
-+ struct retu_rtc *rtc = dev_get_drvdata(dev);
-+ u16 chmar;
-+
-+ mutex_lock(&rtc->mutex);
-+
-+ chmar = retu_read_reg(rtc->dev, RETU_REG_RTCHMAR);
-+
-+ alm->time.tm_hour = (chmar >> 8) & 0x1f;
-+ alm->time.tm_min = chmar & 0x3f;
-+ alm->enabled = !!rtc->alarm_expired;
-+
-+ mutex_unlock(&rtc->mutex);
-+
-+ return 0;
-+}
-+
-+static int retu_rtc_set_time(struct device *dev, struct rtc_time *tm)
-+{
-+ struct retu_rtc *rtc = dev_get_drvdata(dev);
-+ u16 dsr;
-+ u16 hmr;
-+
-+ dsr = ((tm->tm_mday & 0xff) << 8) | (tm->tm_hour & 0xff);
-+ hmr = ((tm->tm_min & 0xff) << 8) | (tm->tm_sec & 0xff);
-+
-+ mutex_lock(&rtc->mutex);
-+
-+ retu_write_reg(rtc->dev, RETU_REG_RTCDSR, dsr);
-+ retu_write_reg(rtc->dev, RETU_REG_RTCHMR, hmr);
-+
-+ mutex_unlock(&rtc->mutex);
-+
-+ return 0;
-+}
-+
-+static int retu_rtc_read_time(struct device *dev, struct rtc_time *tm)
-+{
-+ struct retu_rtc *rtc = dev_get_drvdata(dev);
-+ u16 dsr;
-+ u16 hmr;
-+
-+ /*
-+ * DSR holds days and hours
-+ * HMR hols minutes and seconds
-+ *
-+ * both are 16 bit registers with 8-bit for each field.
-+ */
-+
-+ mutex_lock(&rtc->mutex);
-+
-+ dsr = retu_read_reg(rtc->dev, RETU_REG_RTCDSR);
-+ hmr = retu_read_reg(rtc->dev, RETU_REG_RTCHMR);
-+
-+ tm->tm_sec = hmr & 0xff;
-+ tm->tm_min = hmr >> 8;
-+ tm->tm_hour = dsr & 0xff;
-+ tm->tm_mday = dsr >> 8;
-+
-+ mutex_unlock(&rtc->mutex);
-+
-+ return 0;
-+}
-+
-+static struct rtc_class_ops retu_rtc_ops = {
-+ .read_time = retu_rtc_read_time,
-+ .set_time = retu_rtc_set_time,
-+ .read_alarm = retu_rtc_read_alarm,
-+ .set_alarm = retu_rtc_set_alarm,
-+};
-+
-+static int __init retu_rtc_probe(struct platform_device *pdev)
-+{
-+ struct retu_rtc *rtc;
-+ int r;
-+
-+ rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
-+ if (!rtc) {
-+ dev_err(&pdev->dev, "not enough memory\n");
-+ r = -ENOMEM;
-+ goto err0;
-+ }
-+
-+ rtc->dev = &pdev->dev;
-+ platform_set_drvdata(pdev, rtc);
-+ mutex_init(&rtc->mutex);
-+
-+ rtc->alarm_expired = retu_read_reg(rtc->dev, RETU_REG_IDR) &
-+ (0x1 << RETU_INT_RTCA);
-+
-+ r = retu_rtc_init_irq(rtc);
-+ if (r < 0) {
-+ dev_err(&pdev->dev, "failed to request retu irq\n");
-+ goto err1;
-+ }
-+
-+ /* If the calibration register is zero, we've probably lost power */
-+ if (!(retu_read_reg(rtc->dev, RETU_REG_RTCCALR) & 0x00ff))
-+ retu_rtc_do_reset(rtc);
-+
-+ rtc->rtc = rtc_device_register(pdev->name, &pdev->dev, &
-+ retu_rtc_ops, THIS_MODULE);
-+ if (IS_ERR(rtc->rtc)) {
-+ dev_err(&pdev->dev, "can't register RTC device\n");
-+ goto err2;
-+ }
-+
-+ return 0;
-+
-+err2:
-+ free_irq(rtc->irq_rtcs, rtc);
-+ free_irq(rtc->irq_rtca, rtc);
-+
-+err1:
-+ kfree(rtc);
-+
-+err0:
-+ return r;
-+}
-+
-+static int __devexit retu_rtc_remove(struct platform_device *pdev)
-+{
-+ struct retu_rtc *rtc = platform_get_drvdata(pdev);
-+
-+ free_irq(rtc->irq_rtcs, rtc);
-+ free_irq(rtc->irq_rtca, rtc);
-+ rtc_device_unregister(rtc->rtc);
-+ kfree(rtc);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver retu_rtc_driver = {
-+ .remove = __exit_p(retu_rtc_remove),
-+ .driver = {
-+ .name = "retu-rtc",
-+ },
-+};
-+
-+static int __init retu_rtc_init(void)
-+{
-+ return platform_driver_probe(&retu_rtc_driver, retu_rtc_probe);
-+}
-+module_init(retu_rtc_init);
-+
-+static void __exit retu_rtc_exit(void)
-+{
-+ platform_driver_unregister(&retu_rtc_driver);
-+}
-+module_exit(retu_rtc_exit);
-+
-+MODULE_DESCRIPTION("Retu RTC");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Paul Mundt");
-+MODULE_AUTHOR("Igor Stoppa");
-+MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
-+
---- /dev/null
-+++ b/drivers/cbus/retu-wdt.c
-@@ -0,0 +1,272 @@
-+/**
-+ * drivers/cbus/retu-wdt.c
-+ *
-+ * Driver for Retu watchdog
-+ *
-+ * Copyright (C) 2004, 2005 Nokia Corporation
-+ *
-+ * Written by Amit Kucheria <amit.kucheria@nokia.com>
-+ *
-+ * Cleanups by Michael Buesch <mb@bu3sch.de> (C) 2011
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/fs.h>
-+#include <linux/io.h>
-+#include <linux/platform_device.h>
-+
-+#include <linux/completion.h>
-+#include <linux/errno.h>
-+#include <linux/moduleparam.h>
-+#include <linux/miscdevice.h>
-+#include <linux/watchdog.h>
-+
-+#include <asm/uaccess.h>
-+
-+#include <plat/prcm.h>
-+
-+#include "cbus.h"
-+#include "retu.h"
-+
-+/* Watchdog timeout in seconds */
-+#define RETU_WDT_MIN_TIMER 0
-+#define RETU_WDT_DEFAULT_TIMER 32
-+#define RETU_WDT_MAX_TIMER 63
-+
-+struct retu_wdt_dev {
-+ struct device *dev;
-+ unsigned int period_val; /* Current period of watchdog */
-+ unsigned long users;
-+ struct miscdevice miscdev;
-+ struct delayed_work ping_work;
-+ struct mutex mutex;
-+};
-+
-+
-+static inline void _retu_modify_counter(struct retu_wdt_dev *wdev,
-+ unsigned int new)
-+{
-+ retu_write_reg(wdev->dev, RETU_REG_WATCHDOG, (u16)new);
-+}
-+
-+static int retu_modify_counter(struct retu_wdt_dev *wdev, unsigned int new)
-+{
-+ if (new < RETU_WDT_MIN_TIMER || new > RETU_WDT_MAX_TIMER)
-+ return -EINVAL;
-+
-+ mutex_lock(&wdev->mutex);
-+ wdev->period_val = new;
-+ _retu_modify_counter(wdev, wdev->period_val);
-+ mutex_unlock(&wdev->mutex);
-+
-+ return 0;
-+}
-+
-+/*
-+ * Since retu watchdog cannot be disabled in hardware, we must kick it
-+ * with a timer until userspace watchdog software takes over. Do this
-+ * unless /dev/watchdog is open or CONFIG_WATCHDOG_NOWAYOUT is set.
-+ */
-+static void retu_wdt_ping_enable(struct retu_wdt_dev *wdev)
-+{
-+ _retu_modify_counter(wdev, RETU_WDT_MAX_TIMER);
-+ schedule_delayed_work(&wdev->ping_work,
-+ round_jiffies_relative(RETU_WDT_DEFAULT_TIMER * HZ));
-+}
-+
-+static void retu_wdt_ping_disable(struct retu_wdt_dev *wdev)
-+{
-+ _retu_modify_counter(wdev, RETU_WDT_MAX_TIMER);
-+ cancel_delayed_work_sync(&wdev->ping_work);
-+}
-+
-+static void retu_wdt_ping_work(struct work_struct *work)
-+{
-+ struct retu_wdt_dev *wdev = container_of(to_delayed_work(work),
-+ struct retu_wdt_dev, ping_work);
-+ retu_wdt_ping_enable(wdev);
-+}
-+
-+static int retu_wdt_open(struct inode *inode, struct file *file)
-+{
-+ struct miscdevice *mdev = file->private_data;
-+ struct retu_wdt_dev *wdev = container_of(mdev, struct retu_wdt_dev, miscdev);
-+
-+ if (test_and_set_bit(0, &wdev->users))
-+ return -EBUSY;
-+
-+ retu_wdt_ping_disable(wdev);
-+
-+ return nonseekable_open(inode, file);
-+}
-+
-+static int retu_wdt_release(struct inode *inode, struct file *file)
-+{
-+ struct miscdevice *mdev = file->private_data;
-+ struct retu_wdt_dev *wdev = container_of(mdev, struct retu_wdt_dev, miscdev);
-+
-+#ifndef CONFIG_WATCHDOG_NOWAYOUT
-+ retu_wdt_ping_enable(wdev);
-+#endif
-+ clear_bit(0, &wdev->users);
-+
-+ return 0;
-+}
-+
-+static ssize_t retu_wdt_write(struct file *file, const char __user *data,
-+ size_t len, loff_t *ppos)
-+{
-+ struct miscdevice *mdev = file->private_data;
-+ struct retu_wdt_dev *wdev = container_of(mdev, struct retu_wdt_dev, miscdev);
-+
-+ if (len)
-+ retu_modify_counter(wdev, RETU_WDT_MAX_TIMER);
-+
-+ return len;
-+}
-+
-+static long retu_wdt_ioctl(struct file *file, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ struct miscdevice *mdev = file->private_data;
-+ struct retu_wdt_dev *wdev = container_of(mdev, struct retu_wdt_dev, miscdev);
-+ int new_margin;
-+
-+ static const struct watchdog_info ident = {
-+ .identity = "Retu Watchdog",
-+ .options = WDIOF_SETTIMEOUT,
-+ .firmware_version = 0,
-+ };
-+
-+ switch (cmd) {
-+ default:
-+ return -ENOTTY;
-+ case WDIOC_GETSUPPORT:
-+ return copy_to_user((struct watchdog_info __user *)arg, &ident,
-+ sizeof(ident));
-+ case WDIOC_GETSTATUS:
-+ return put_user(0, (int __user *)arg);
-+ case WDIOC_GETBOOTSTATUS:
-+ if (cpu_is_omap16xx())
-+ return put_user(omap_readw(ARM_SYSST),
-+ (int __user *)arg);
-+ if (cpu_is_omap24xx())
-+ return put_user(omap_prcm_get_reset_sources(),
-+ (int __user *)arg);
-+ case WDIOC_KEEPALIVE:
-+ retu_modify_counter(wdev, RETU_WDT_MAX_TIMER);
-+ break;
-+ case WDIOC_SETTIMEOUT:
-+ if (get_user(new_margin, (int __user *)arg))
-+ return -EFAULT;
-+ retu_modify_counter(wdev, new_margin);
-+ /* Fall through */
-+ case WDIOC_GETTIMEOUT:
-+ return put_user(wdev->period_val, (int __user *)arg);
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct file_operations retu_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .write = retu_wdt_write,
-+ .unlocked_ioctl = retu_wdt_ioctl,
-+ .open = retu_wdt_open,
-+ .release = retu_wdt_release,
-+};
-+
-+static int __init retu_wdt_probe(struct platform_device *pdev)
-+{
-+ struct retu_wdt_dev *wdev;
-+ int ret;
-+
-+ wdev = kzalloc(sizeof(struct retu_wdt_dev), GFP_KERNEL);
-+ if (!wdev)
-+ return -ENOMEM;
-+
-+ wdev->dev = &pdev->dev;
-+ wdev->period_val = RETU_WDT_DEFAULT_TIMER;
-+ mutex_init(&wdev->mutex);
-+
-+ platform_set_drvdata(pdev, wdev);
-+
-+ wdev->miscdev.parent = &pdev->dev;
-+ wdev->miscdev.minor = WATCHDOG_MINOR;
-+ wdev->miscdev.name = "watchdog";
-+ wdev->miscdev.fops = &retu_wdt_fops;
-+
-+ ret = misc_register(&wdev->miscdev);
-+ if (ret)
-+ goto err_free_wdev;
-+
-+ INIT_DELAYED_WORK(&wdev->ping_work, retu_wdt_ping_work);
-+
-+ /* Kick the watchdog for kernel booting to finish.
-+ * If nowayout is not set, we start the ping work. */
-+#ifdef CONFIG_WATCHDOG_NOWAYOUT
-+ retu_modify_counter(wdev, RETU_WDT_MAX_TIMER);
-+#else
-+ retu_wdt_ping_enable(wdev);
-+#endif
-+
-+ return 0;
-+
-+err_free_wdev:
-+ kfree(wdev);
-+
-+ return ret;
-+}
-+
-+static int __devexit retu_wdt_remove(struct platform_device *pdev)
-+{
-+ struct retu_wdt_dev *wdev;
-+
-+ wdev = platform_get_drvdata(pdev);
-+ misc_deregister(&wdev->miscdev);
-+ cancel_delayed_work_sync(&wdev->ping_work);
-+ kfree(wdev);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver retu_wdt_driver = {
-+ .remove = __exit_p(retu_wdt_remove),
-+ .driver = {
-+ .name = "retu-wdt",
-+ },
-+};
-+
-+static int __init retu_wdt_init(void)
-+{
-+ return platform_driver_probe(&retu_wdt_driver, retu_wdt_probe);
-+}
-+
-+static void __exit retu_wdt_exit(void)
-+{
-+ platform_driver_unregister(&retu_wdt_driver);
-+}
-+
-+module_init(retu_wdt_init);
-+module_exit(retu_wdt_exit);
-+
-+MODULE_DESCRIPTION("Retu WatchDog");
-+MODULE_AUTHOR("Amit Kucheria");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/cbus/tahvo.c
-@@ -0,0 +1,423 @@
-+/**
-+ * drivers/cbus/tahvo.c
-+ *
-+ * Support functions for Tahvo ASIC
-+ *
-+ * Copyright (C) 2004, 2005 Nokia Corporation
-+ *
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
-+ * David Weinehall <david.weinehall@nokia.com>, and
-+ * Mikko Ylinen <mikko.k.ylinen@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+
-+#include <linux/slab.h>
-+#include <linux/kernel.h>
-+#include <linux/errno.h>
-+#include <linux/device.h>
-+#include <linux/irq.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/platform_data/cbus.h>
-+#include <linux/mutex.h>
-+
-+#include "cbus.h"
-+#include "tahvo.h"
-+
-+struct tahvo {
-+ /* device lock */
-+ struct mutex mutex;
-+ struct device *dev;
-+
-+ int irq_base;
-+ int irq_end;
-+ int irq;
-+
-+ int ack;
-+ int mask;
-+
-+ unsigned int mask_pending:1;
-+ unsigned int ack_pending:1;
-+ unsigned int is_betty:1;
-+};
-+
-+/**
-+ * __tahvo_read_reg - Reads a value from a register in Tahvo
-+ * @tahvo: pointer to tahvo structure
-+ * @reg: the register address to read from
-+ */
-+static int __tahvo_read_reg(struct tahvo *tahvo, unsigned reg)
-+{
-+ return cbus_read_reg(tahvo->dev, CBUS_TAHVO_DEVICE_ID, reg);
-+}
-+
-+/**
-+ * __tahvo_write_reg - Writes a value to a register in Tahvo
-+ * @tahvo: pointer to tahvo structure
-+ * @reg: register address to write to
-+ * @val: the value to be written to @reg
-+ */
-+static void __tahvo_write_reg(struct tahvo *tahvo, unsigned reg, u16 val)
-+{
-+ cbus_write_reg(tahvo->dev, CBUS_TAHVO_DEVICE_ID, reg, val);
-+}
-+
-+/**
-+ * tahvo_read_reg - Read a value from a register in Tahvo
-+ * @child: device pointer from the calling child
-+ * @reg: the register to read from
-+ *
-+ * This function returns the contents of the specified register
-+ */
-+int tahvo_read_reg(struct device *child, unsigned reg)
-+{
-+ struct tahvo *tahvo = dev_get_drvdata(child->parent);
-+
-+ return __tahvo_read_reg(tahvo, reg);
-+}
-+EXPORT_SYMBOL(tahvo_read_reg);
-+
-+/**
-+ * tahvo_write_reg - Write a value to a register in Tahvo
-+ * @child: device pointer from the calling child
-+ * @reg: the register to write to
-+ * @val : the value to write to the register
-+ *
-+ * This function writes a value to the specified register
-+ */
-+void tahvo_write_reg(struct device *child, unsigned reg, u16 val)
-+{
-+ struct tahvo *tahvo = dev_get_drvdata(child->parent);
-+
-+ __tahvo_write_reg(tahvo, reg, val);
-+}
-+EXPORT_SYMBOL(tahvo_write_reg);
-+
-+/**
-+ * tahvo_set_clear_reg_bits - set and clear register bits atomically
-+ * @child: device pointer from the calling child
-+ * @reg: the register to write to
-+ * @bits: the bits to set
-+ *
-+ * This function sets and clears the specified Tahvo register bits atomically
-+ */
-+void tahvo_set_clear_reg_bits(struct device *child, unsigned reg, u16 set,
-+ u16 clear)
-+{
-+ struct tahvo *tahvo = dev_get_drvdata(child->parent);
-+ u16 w;
-+
-+ mutex_lock(&tahvo->mutex);
-+ w = __tahvo_read_reg(tahvo, reg);
-+ w &= ~clear;
-+ w |= set;
-+ __tahvo_write_reg(tahvo, reg, w);
-+ mutex_unlock(&tahvo->mutex);
-+}
-+
-+static irqreturn_t tahvo_irq_handler(int irq, void *_tahvo)
-+{
-+ struct tahvo *tahvo = _tahvo;
-+ u16 id;
-+ u16 im;
-+
-+ id = __tahvo_read_reg(tahvo, TAHVO_REG_IDR);
-+ im = __tahvo_read_reg(tahvo, TAHVO_REG_IMR);
-+ id &= ~im;
-+
-+ if (!id) {
-+ dev_vdbg(tahvo->dev, "No IRQ, spurious ?\n");
-+ return IRQ_NONE;
-+ }
-+
-+ while (id) {
-+ unsigned long pending = __ffs(id);
-+ unsigned int irq;
-+
-+ id &= ~BIT(pending);
-+ irq = pending + tahvo->irq_base;
-+ handle_nested_irq(irq);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/* -------------------------------------------------------------------------- */
-+
-+static void tahvo_irq_bus_lock(struct irq_data *data)
-+{
-+ struct tahvo *tahvo = irq_data_get_irq_chip_data(data);
-+
-+ mutex_lock(&tahvo->mutex);
-+}
-+
-+static void tahvo_irq_bus_sync_unlock(struct irq_data *data)
-+{
-+ struct tahvo *tahvo = irq_data_get_irq_chip_data(data);
-+
-+ if (tahvo->mask_pending) {
-+ __tahvo_write_reg(tahvo, TAHVO_REG_IMR, tahvo->mask);
-+ tahvo->mask_pending = false;
-+ }
-+
-+ if (tahvo->ack_pending) {
-+ __tahvo_write_reg(tahvo, TAHVO_REG_IDR, tahvo->ack);
-+ tahvo->ack_pending = false;
-+ }
-+
-+ mutex_unlock(&tahvo->mutex);
-+}
-+
-+static void tahvo_irq_mask(struct irq_data *data)
-+{
-+ struct tahvo *tahvo = irq_data_get_irq_chip_data(data);
-+ int irq = data->irq;
-+
-+ tahvo->mask |= (1 << (irq - tahvo->irq_base));
-+ tahvo->mask_pending = true;
-+}
-+
-+static void tahvo_irq_unmask(struct irq_data *data)
-+{
-+ struct tahvo *tahvo = irq_data_get_irq_chip_data(data);
-+ int irq = data->irq;
-+
-+ tahvo->mask &= ~(1 << (irq - tahvo->irq_base));
-+ tahvo->mask_pending = true;
-+}
-+
-+static void tahvo_irq_ack(struct irq_data *data)
-+{
-+ struct tahvo *tahvo = irq_data_get_irq_chip_data(data);
-+ int irq = data->irq;
-+
-+ tahvo->ack |= (1 << (irq - tahvo->irq_base));
-+ tahvo->ack_pending = true;
-+}
-+
-+static struct irq_chip tahvo_irq_chip = {
-+ .name = "tahvo",
-+ .irq_bus_lock = tahvo_irq_bus_lock,
-+ .irq_bus_sync_unlock = tahvo_irq_bus_sync_unlock,
-+ .irq_mask = tahvo_irq_mask,
-+ .irq_unmask = tahvo_irq_unmask,
-+ .irq_ack = tahvo_irq_ack,
-+};
-+
-+static inline void tahvo_irq_setup(int irq)
-+{
-+#ifdef CONFIG_ARM
-+ set_irq_flags(irq, IRQF_VALID);
-+#else
-+ irq_set_noprobe(irq);
-+#endif
-+}
-+
-+static void tahvo_irq_init(struct tahvo *tahvo)
-+{
-+ int base = tahvo->irq_base;
-+ int end = tahvo->irq_end;
-+ int irq;
-+
-+ for (irq = base; irq < end; irq++) {
-+ irq_set_chip_data(irq, tahvo);
-+ irq_set_chip_and_handler(irq, &tahvo_irq_chip,
-+ handle_simple_irq);
-+ irq_set_nested_thread(irq, 1);
-+ tahvo_irq_setup(irq);
-+ }
-+}
-+
-+/* -------------------------------------------------------------------------- */
-+
-+static struct resource generic_resources[] = {
-+ {
-+ .start = -EINVAL, /* fixed later */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct device *tahvo_allocate_child(const char *name,
-+ struct device *parent, int irq)
-+{
-+ struct platform_device *pdev;
-+ int ret;
-+
-+ pdev = platform_device_alloc(name, -1);
-+ if (!pdev) {
-+ dev_dbg(parent, "can't allocate %s\n", name);
-+ goto err0;
-+ }
-+
-+ pdev->dev.parent = parent;
-+
-+ if (irq > 0) {
-+ generic_resources[0].start = irq;
-+
-+ ret = platform_device_add_resources(pdev, generic_resources,
-+ ARRAY_SIZE(generic_resources));
-+ if (ret < 0) {
-+ dev_dbg(parent, "can't add resources to %s\n", name);
-+ goto err1;
-+ }
-+ }
-+
-+ ret = platform_device_add(pdev);
-+ if (ret < 0) {
-+ dev_dbg(parent, "can't add %s\n", name);
-+ goto err1;
-+ }
-+
-+ return &pdev->dev;
-+
-+err1:
-+ platform_device_put(pdev);
-+
-+err0:
-+ return NULL;
-+}
-+
-+static int tahvo_allocate_children(struct device *parent, int irq_base)
-+{
-+ struct device *child;
-+
-+ child = tahvo_allocate_child("tahvo-usb", parent,
-+ irq_base + TAHVO_INT_VBUSON);
-+ if (!child)
-+ return -ENOMEM;
-+
-+ child = tahvo_allocate_child("tahvo-pwm", parent, -1);
-+ if (!child)
-+ return -ENOMEM;
-+
-+ return 0;
-+}
-+
-+static int __devinit tahvo_probe(struct platform_device *pdev)
-+{
-+ struct tahvo *tahvo;
-+ int rev;
-+ int ret;
-+ int irq;
-+ int id;
-+
-+ tahvo = kzalloc(sizeof(*tahvo), GFP_KERNEL);
-+ if (!tahvo) {
-+ dev_err(&pdev->dev, "not enough memory\n");
-+ ret = -ENOMEM;
-+ goto err0;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ platform_set_drvdata(pdev, tahvo);
-+
-+ mutex_init(&tahvo->mutex);
-+
-+ ret = irq_alloc_descs(-1, 0, MAX_TAHVO_IRQ_HANDLERS, 0);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "failed to allocate IRQ descs\n");
-+ goto err1;
-+ }
-+
-+ tahvo->irq_base = ret;
-+ tahvo->irq_end = ret + MAX_TAHVO_IRQ_HANDLERS;
-+ tahvo->dev = &pdev->dev;
-+ tahvo->irq = irq;
-+
-+ tahvo_irq_init(tahvo);
-+
-+ rev = __tahvo_read_reg(tahvo, TAHVO_REG_ASICR);
-+
-+ id = (rev >> 8) & 0xff;
-+
-+ if (id == 0x0b)
-+ tahvo->is_betty = true;
-+
-+ ret = tahvo_allocate_children(&pdev->dev, tahvo->irq_base);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "failed to allocate children\n");
-+ goto err2;
-+ }
-+
-+ dev_err(&pdev->dev, "%s v%d.%d found\n",
-+ tahvo->is_betty ? "Betty" : "Tahvo",
-+ (rev >> 4) & 0x0f, rev & 0x0f);
-+
-+ /* Mask all TAHVO interrupts */
-+ __tahvo_write_reg(tahvo, TAHVO_REG_IMR, 0xffff);
-+
-+ ret = request_threaded_irq(irq, NULL, tahvo_irq_handler,
-+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
-+ "tahvo", tahvo);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "Unable to register IRQ handler\n");
-+ goto err2;
-+ }
-+
-+ return 0;
-+
-+err2:
-+ irq_free_descs(tahvo->irq_base, MAX_TAHVO_IRQ_HANDLERS);
-+
-+err1:
-+ kfree(tahvo);
-+
-+err0:
-+ return ret;
-+}
-+
-+static int __devexit tahvo_remove(struct platform_device *pdev)
-+{
-+ struct tahvo *tahvo = platform_get_drvdata(pdev);
-+ int irq;
-+
-+ irq = platform_get_irq(pdev, 0);
-+
-+ free_irq(irq, 0);
-+ irq_free_descs(tahvo->irq_base, MAX_TAHVO_IRQ_HANDLERS);
-+ kfree(tahvo);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver tahvo_driver = {
-+ .probe = tahvo_probe,
-+ .remove = __devexit_p(tahvo_remove),
-+ .driver = {
-+ .name = "tahvo",
-+ },
-+};
-+
-+static int __init tahvo_init(void)
-+{
-+ return platform_driver_register(&tahvo_driver);
-+}
-+subsys_initcall(tahvo_init);
-+
-+static void __exit tahvo_exit(void)
-+{
-+ platform_driver_unregister(&tahvo_driver);
-+}
-+module_exit(tahvo_exit);
-+
-+MODULE_DESCRIPTION("Tahvo ASIC control");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Juha Yrjölä");
-+MODULE_AUTHOR("David Weinehall");
-+MODULE_AUTHOR("Mikko Ylinen");
-+
---- /dev/null
-+++ b/drivers/cbus/tahvo.h
-@@ -0,0 +1,58 @@
-+/*
-+ * drivers/cbus/tahvo.h
-+ *
-+ * Copyright (C) 2004, 2005 Nokia Corporation
-+ *
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com> and
-+ * David Weinehall <david.weinehall@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __DRIVERS_CBUS_TAHVO_H
-+#define __DRIVERS_CBUS_TAHVO_H
-+
-+#include <linux/types.h>
-+
-+/* Registers */
-+#define TAHVO_REG_ASICR 0x00 /* ASIC ID & revision */
-+#define TAHVO_REG_IDR 0x01 /* Interrupt ID */
-+#define TAHVO_REG_IDSR 0x02 /* Interrupt status */
-+#define TAHVO_REG_IMR 0x03 /* Interrupt mask */
-+#define TAHVO_REG_CHGCURR 0x04 /* Charge current control PWM (8-bit) */
-+#define TAHVO_REG_LEDPWMR 0x05 /* LED PWM */
-+#define TAHVO_REG_USBR 0x06 /* USB control */
-+#define TAHVO_REG_CHGCTL 0x08 /* Charge control register */
-+#define TAHVO_REG_CHGCTL_EN 0x0001 /* Global charge enable */
-+#define TAHVO_REG_CHGCTL_PWMOVR 0x0004 /* PWM override. Force charge PWM to 0%/100% duty cycle. */
-+#define TAHVO_REG_CHGCTL_PWMOVRZERO 0x0008 /* If set, PWM override is 0% (If unset -> 100%) */
-+#define TAHVO_REG_CHGCTL_CURMEAS 0x0040 /* Enable battery current measurement. */
-+#define TAHVO_REG_CHGCTL_CURTIMRST 0x0080 /* Current measure timer reset. */
-+#define TAHVO_REG_BATCURRTIMER 0x0c /* Battery current measure timer (8-bit) */
-+#define TAHVO_REG_BATCURR 0x0d /* Battery (dis)charge current (signed 16-bit) */
-+
-+#define TAHVO_REG_MAX 0x0d
-+
-+/* Interrupt sources */
-+#define TAHVO_INT_VBUSON 0
-+#define TAHVO_INT_BATCURR 7 /* Battery current measure timer */
-+
-+#define MAX_TAHVO_IRQ_HANDLERS 8
-+
-+int tahvo_read_reg(struct device *child, unsigned reg);
-+void tahvo_write_reg(struct device *child, unsigned reg, u16 val);
-+void tahvo_set_clear_reg_bits(struct device *child, unsigned reg, u16 set,
-+ u16 clear);
-+
-+#endif /* __DRIVERS_CBUS_TAHVO_H */
---- /dev/null
-+++ b/drivers/cbus/tahvo-usb.c
-@@ -0,0 +1,740 @@
-+/**
-+ * drivers/cbus/tahvo-usb.c
-+ *
-+ * Tahvo USB transeiver
-+ *
-+ * Copyright (C) 2005-2006 Nokia Corporation
-+ *
-+ * Parts copied from drivers/i2c/chips/isp1301_omap.c
-+ * Copyright (C) 2004 Texas Instruments
-+ * Copyright (C) 2004 David Brownell
-+ *
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>,
-+ * Tony Lindgren <tony@atomide.com>, and
-+ * Timo Teräs <timo.teras@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/io.h>
-+#include <linux/interrupt.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/ch9.h>
-+#include <linux/usb/gadget.h>
-+#include <linux/usb.h>
-+#include <linux/usb/otg.h>
-+#include <linux/i2c.h>
-+#include <linux/workqueue.h>
-+#include <linux/kobject.h>
-+#include <linux/clk.h>
-+#include <linux/mutex.h>
-+
-+#include <asm/irq.h>
-+#include <plat/usb.h>
-+
-+#include "cbus.h"
-+#include "tahvo.h"
-+
-+#define DRIVER_NAME "tahvo-usb"
-+
-+#define USBR_SLAVE_CONTROL (1 << 8)
-+#define USBR_VPPVIO_SW (1 << 7)
-+#define USBR_SPEED (1 << 6)
-+#define USBR_REGOUT (1 << 5)
-+#define USBR_MASTER_SW2 (1 << 4)
-+#define USBR_MASTER_SW1 (1 << 3)
-+#define USBR_SLAVE_SW (1 << 2)
-+#define USBR_NSUSPEND (1 << 1)
-+#define USBR_SEMODE (1 << 0)
-+
-+/* bits in OTG_CTRL */
-+
-+/* Bits that are controlled by OMAP OTG and are read-only */
-+#define OTG_CTRL_OMAP_MASK (OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|\
-+ OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID)
-+/* Bits that are controlled by transceiver */
-+#define OTG_CTRL_XCVR_MASK (OTG_ASESSVLD|OTG_BSESSEND|\
-+ OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID)
-+/* Bits that are controlled by system */
-+#define OTG_CTRL_SYS_MASK (OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|\
-+ OTG_B_HNPEN|OTG_BUSDROP)
-+
-+#if defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OTG)
-+#error tahvo-otg.c does not work with OCHI yet!
-+#endif
-+
-+#define TAHVO_MODE_HOST 0
-+#define TAHVO_MODE_PERIPHERAL 1
-+
-+#ifdef CONFIG_USB_OTG
-+#define TAHVO_MODE(tu) (tu)->tahvo_mode
-+#elif defined(CONFIG_USB_GADGET_OMAP)
-+#define TAHVO_MODE(tu) TAHVO_MODE_PERIPHERAL
-+#else
-+#define TAHVO_MODE(tu) TAHVO_MODE_HOST
-+#endif
-+
-+struct tahvo_usb {
-+ struct device *dev;
-+ struct platform_device *pt_dev;
-+ struct otg_transceiver otg;
-+ int vbus_state;
-+ struct mutex serialize;
-+#ifdef CONFIG_USB_OTG
-+ int tahvo_mode;
-+#endif
-+ struct clk *ick;
-+
-+ int irq;
-+};
-+static struct tahvo_usb *tahvo_usb_device;
-+
-+/*
-+ * ---------------------------------------------------------------------------
-+ * OTG related functions
-+ *
-+ * These shoud be separated into omap-otg.c driver module, as they are used
-+ * by various transceivers. These functions are needed in the UDC-only case
-+ * as well. These functions are copied from GPL isp1301_omap.c
-+ * ---------------------------------------------------------------------------
-+ */
-+static struct platform_device *tahvo_otg_dev;
-+
-+static irqreturn_t omap_otg_irq(int irq, void *arg)
-+{
-+ u16 otg_irq;
-+
-+ otg_irq = omap_readw(OTG_IRQ_SRC);
-+ if (otg_irq & OPRT_CHG) {
-+ omap_writew(OPRT_CHG, OTG_IRQ_SRC);
-+ } else if (otg_irq & B_SRP_TMROUT) {
-+ omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
-+ } else if (otg_irq & B_HNP_FAIL) {
-+ omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
-+ } else if (otg_irq & A_SRP_DETECT) {
-+ omap_writew(A_SRP_DETECT, OTG_IRQ_SRC);
-+ } else if (otg_irq & A_REQ_TMROUT) {
-+ omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
-+ } else if (otg_irq & A_VBUS_ERR) {
-+ omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
-+ } else if (otg_irq & DRIVER_SWITCH) {
-+#ifdef CONFIG_USB_OTG
-+ if ((!(omap_readl(OTG_CTRL) & OTG_DRIVER_SEL)) &&
-+ tu->otg.host && tu->otg.state == OTG_STATE_A_HOST) {
-+ /* role is host */
-+ usb_bus_start_enum(tu->otg.host,
-+ tu->otg.host->otg_port);
-+ }
-+#endif
-+ omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC);
-+ } else
-+ return IRQ_NONE;
-+
-+ return IRQ_HANDLED;
-+
-+}
-+
-+static int tahvo_otg_init(void)
-+{
-+ u32 l;
-+
-+#ifdef CONFIG_USB_OTG
-+ if (!tahvo_otg_dev) {
-+ printk("tahvo-usb: no tahvo_otg_dev\n");
-+ return -ENODEV;
-+ }
-+#endif
-+
-+ l = omap_readl(OTG_SYSCON_1);
-+ l &= ~OTG_IDLE_EN;
-+ omap_writel(l, OTG_SYSCON_1);
-+ udelay(100);
-+
-+ /* some of these values are board-specific... */
-+ l = omap_readl(OTG_SYSCON_2);
-+ l |= OTG_EN
-+ /* for B-device: */
-+ | SRP_GPDATA /* 9msec Bdev D+ pulse */
-+ | SRP_GPDVBUS /* discharge after VBUS pulse */
-+ // | (3 << 24) /* 2msec VBUS pulse */
-+ /* for A-device: */
-+ | (0 << 20) /* 200ms nominal A_WAIT_VRISE timer */
-+ | SRP_DPW /* detect 167+ns SRP pulses */
-+ | SRP_DATA | SRP_VBUS; /* accept both kinds of SRP pulse */
-+ omap_writel(l, OTG_SYSCON_2);
-+
-+ omap_writew(DRIVER_SWITCH | OPRT_CHG
-+ | B_SRP_TMROUT | B_HNP_FAIL
-+ | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT,
-+ OTG_IRQ_EN);
-+ l = omap_readl(OTG_SYSCON_2);
-+ l |= OTG_EN;
-+ omap_writel(l, OTG_SYSCON_2);
-+
-+ return 0;
-+}
-+
-+static int __init omap_otg_probe(struct platform_device *pdev)
-+{
-+ int ret;
-+
-+ tahvo_otg_dev = pdev;
-+ ret = tahvo_otg_init();
-+ if (ret != 0) {
-+ printk(KERN_ERR "tahvo-usb: tahvo_otg_init failed\n");
-+ return ret;
-+ }
-+
-+ return request_irq(tahvo_otg_dev->resource[1].start,
-+ omap_otg_irq, IRQF_DISABLED, DRIVER_NAME,
-+ tahvo_usb_device);
-+}
-+
-+static int __exit omap_otg_remove(struct platform_device *pdev)
-+{
-+ free_irq(tahvo_otg_dev->resource[1].start, tahvo_usb_device);
-+ tahvo_otg_dev = NULL;
-+
-+ return 0;
-+}
-+
-+struct platform_driver omap_otg_driver = {
-+ .driver = {
-+ .name = "omap_otg",
-+ },
-+ .remove = __exit_p(omap_otg_remove),
-+};
-+
-+/*
-+ * ---------------------------------------------------------------------------
-+ * Tahvo related functions
-+ * These are Nokia proprietary code, except for the OTG register settings,
-+ * which are copied from isp1301.c
-+ * ---------------------------------------------------------------------------
-+ */
-+static ssize_t vbus_state_show(struct device *device,
-+ struct device_attribute *attr, char *buf)
-+{
-+ struct tahvo_usb *tu = dev_get_drvdata(device);
-+ return sprintf(buf, "%d\n", tu->vbus_state);
-+}
-+static DEVICE_ATTR(vbus_state, 0444, vbus_state_show, NULL);
-+
-+int vbus_active = 0;
-+
-+static void check_vbus_state(struct tahvo_usb *tu)
-+{
-+ int reg, prev_state;
-+
-+ reg = tahvo_read_reg(tu->dev, TAHVO_REG_IDSR);
-+ if (reg & 0x01) {
-+ u32 l;
-+
-+ vbus_active = 1;
-+ switch (tu->otg.state) {
-+ case OTG_STATE_B_IDLE:
-+ /* Enable the gadget driver */
-+ if (tu->otg.gadget)
-+ usb_gadget_vbus_connect(tu->otg.gadget);
-+ /* Set B-session valid and not B-sessio ended to indicate
-+ * Vbus to be ok. */
-+ l = omap_readl(OTG_CTRL);
-+ l &= ~OTG_BSESSEND;
-+ l |= OTG_BSESSVLD;
-+ omap_writel(l, OTG_CTRL);
-+
-+ tu->otg.state = OTG_STATE_B_PERIPHERAL;
-+ break;
-+ case OTG_STATE_A_IDLE:
-+ /* Session is now valid assuming the USB hub is driving Vbus */
-+ tu->otg.state = OTG_STATE_A_HOST;
-+ break;
-+ default:
-+ break;
-+ }
-+ printk("USB cable connected\n");
-+ } else {
-+ switch (tu->otg.state) {
-+ case OTG_STATE_B_PERIPHERAL:
-+ if (tu->otg.gadget)
-+ usb_gadget_vbus_disconnect(tu->otg.gadget);
-+ tu->otg.state = OTG_STATE_B_IDLE;
-+ break;
-+ case OTG_STATE_A_HOST:
-+ tu->otg.state = OTG_STATE_A_IDLE;
-+ break;
-+ default:
-+ break;
-+ }
-+ printk("USB cable disconnected\n");
-+ vbus_active = 0;
-+ }
-+
-+ prev_state = tu->vbus_state;
-+ tu->vbus_state = reg & 0x01;
-+ if (prev_state != tu->vbus_state)
-+ sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state");
-+}
-+
-+static void tahvo_usb_become_host(struct tahvo_usb *tu)
-+{
-+ u32 l;
-+
-+ /* Clear system and transceiver controlled bits
-+ * also mark the A-session is always valid */
-+ tahvo_otg_init();
-+
-+ l = omap_readl(OTG_CTRL);
-+ l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK);
-+ l |= OTG_ASESSVLD;
-+ omap_writel(l, OTG_CTRL);
-+
-+ /* Power up the transceiver in USB host mode */
-+ tahvo_write_reg(tu->dev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
-+ USBR_MASTER_SW2 | USBR_MASTER_SW1);
-+ tu->otg.state = OTG_STATE_A_IDLE;
-+
-+ check_vbus_state(tu);
-+}
-+
-+static void tahvo_usb_stop_host(struct tahvo_usb *tu)
-+{
-+ tu->otg.state = OTG_STATE_A_IDLE;
-+}
-+
-+static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
-+{
-+ u32 l;
-+
-+ /* Clear system and transceiver controlled bits
-+ * and enable ID to mark peripheral mode and
-+ * BSESSEND to mark no Vbus */
-+ tahvo_otg_init();
-+ l = omap_readl(OTG_CTRL);
-+ l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD);
-+ l |= OTG_ID | OTG_BSESSEND;
-+ omap_writel(l, OTG_CTRL);
-+
-+ /* Power up transceiver and set it in USB perhiperal mode */
-+ tahvo_write_reg(tu->dev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT | USBR_NSUSPEND | USBR_SLAVE_SW);
-+ tu->otg.state = OTG_STATE_B_IDLE;
-+
-+ check_vbus_state(tu);
-+}
-+
-+static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu)
-+{
-+ u32 l;
-+
-+ l = omap_readl(OTG_CTRL);
-+ l &= ~OTG_BSESSVLD;
-+ l |= OTG_BSESSEND;
-+ omap_writel(l, OTG_CTRL);
-+
-+ if (tu->otg.gadget)
-+ usb_gadget_vbus_disconnect(tu->otg.gadget);
-+ tu->otg.state = OTG_STATE_B_IDLE;
-+
-+}
-+
-+static void tahvo_usb_power_off(struct tahvo_usb *tu)
-+{
-+ u32 l;
-+ int id;
-+
-+ /* Disable gadget controller if any */
-+ if (tu->otg.gadget)
-+ usb_gadget_vbus_disconnect(tu->otg.gadget);
-+
-+ /* Disable OTG and interrupts */
-+ if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
-+ id = OTG_ID;
-+ else
-+ id = 0;
-+ l = omap_readl(OTG_CTRL);
-+ l &= ~(OTG_CTRL_XCVR_MASK | OTG_CTRL_SYS_MASK | OTG_BSESSVLD);
-+ l |= id | OTG_BSESSEND;
-+ omap_writel(l, OTG_CTRL);
-+ omap_writew(0, OTG_IRQ_EN);
-+
-+ l = omap_readl(OTG_SYSCON_2);
-+ l &= ~OTG_EN;
-+ omap_writel(l, OTG_SYSCON_2);
-+
-+ l = omap_readl(OTG_SYSCON_1);
-+ l |= OTG_IDLE_EN;
-+ omap_writel(l, OTG_SYSCON_1);
-+
-+ /* Power off transceiver */
-+ tahvo_write_reg(tu->dev, TAHVO_REG_USBR, 0);
-+ tu->otg.state = OTG_STATE_UNDEFINED;
-+}
-+
-+
-+static int tahvo_usb_set_power(struct otg_transceiver *dev, unsigned mA)
-+{
-+ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
-+
-+ dev_dbg(&tu->pt_dev->dev, "set_power %d mA\n", mA);
-+
-+ if (dev->state == OTG_STATE_B_PERIPHERAL) {
-+ /* REVISIT: Can Tahvo charge battery from VBUS? */
-+ }
-+ return 0;
-+}
-+
-+static int tahvo_usb_set_suspend(struct otg_transceiver *dev, int suspend)
-+{
-+ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
-+ u16 w;
-+
-+ dev_dbg(&tu->pt_dev->dev, "set_suspend\n");
-+
-+ w = tahvo_read_reg(tu->dev, TAHVO_REG_USBR);
-+ if (suspend)
-+ w &= ~USBR_NSUSPEND;
-+ else
-+ w |= USBR_NSUSPEND;
-+ tahvo_write_reg(tu->dev, TAHVO_REG_USBR, w);
-+
-+ return 0;
-+}
-+
-+static int tahvo_usb_start_srp(struct otg_transceiver *dev)
-+{
-+ struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, otg);
-+ u32 otg_ctrl;
-+
-+ dev_dbg(&tu->pt_dev->dev, "start_srp\n");
-+
-+ if (!dev || tu->otg.state != OTG_STATE_B_IDLE)
-+ return -ENODEV;
-+
-+ otg_ctrl = omap_readl(OTG_CTRL);
-+ if (!(otg_ctrl & OTG_BSESSEND))
-+ return -EINVAL;
-+
-+ otg_ctrl |= OTG_B_BUSREQ;
-+ otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_SYS_MASK;
-+ omap_writel(otg_ctrl, OTG_CTRL);
-+ tu->otg.state = OTG_STATE_B_SRP_INIT;
-+
-+ return 0;
-+}
-+
-+static int tahvo_usb_start_hnp(struct otg_transceiver *otg)
-+{
-+ struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
-+
-+ dev_dbg(&tu->pt_dev->dev, "start_hnp\n");
-+#ifdef CONFIG_USB_OTG
-+ /* REVISIT: Add this for OTG */
-+#endif
-+ return -EINVAL;
-+}
-+
-+static int tahvo_usb_set_host(struct otg_transceiver *otg, struct usb_bus *host)
-+{
-+ struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
-+ u32 l;
-+
-+ dev_dbg(&tu->pt_dev->dev, "set_host %p\n", host);
-+
-+ if (otg == NULL)
-+ return -ENODEV;
-+
-+#if defined(CONFIG_USB_OTG) || !defined(CONFIG_USB_GADGET_OMAP)
-+
-+ mutex_lock(&tu->serialize);
-+
-+ if (host == NULL) {
-+ if (TAHVO_MODE(tu) == TAHVO_MODE_HOST)
-+ tahvo_usb_power_off(tu);
-+ tu->otg.host = NULL;
-+ mutex_unlock(&tu->serialize);
-+ return 0;
-+ }
-+
-+ l = omap_readl(OTG_SYSCON_1);
-+ l &= ~(OTG_IDLE_EN | HST_IDLE_EN | DEV_IDLE_EN);
-+ omap_writel(l, OTG_SYSCON_1);
-+
-+ if (TAHVO_MODE(tu) == TAHVO_MODE_HOST) {
-+ tu->otg.host = NULL;
-+ tahvo_usb_become_host(tu);
-+ }
-+
-+ tu->otg.host = host;
-+
-+ mutex_unlock(&tu->serialize);
-+#else
-+ /* No host mode configured, so do not allow host controlled to be set */
-+ return -EINVAL;
-+#endif
-+
-+ return 0;
-+}
-+
-+static int tahvo_usb_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *gadget)
-+{
-+ struct tahvo_usb *tu = container_of(otg, struct tahvo_usb, otg);
-+
-+ dev_dbg(&tu->pt_dev->dev, "set_peripheral %p\n", gadget);
-+
-+ if (!otg)
-+ return -ENODEV;
-+
-+#if defined(CONFIG_USB_OTG) || defined(CONFIG_USB_GADGET_OMAP)
-+
-+ mutex_lock(&tu->serialize);
-+
-+ if (!gadget) {
-+ if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
-+ tahvo_usb_power_off(tu);
-+ tu->otg.gadget = NULL;
-+ mutex_unlock(&tu->serialize);
-+ return 0;
-+ }
-+
-+ tu->otg.gadget = gadget;
-+ if (TAHVO_MODE(tu) == TAHVO_MODE_PERIPHERAL)
-+ tahvo_usb_become_peripheral(tu);
-+
-+ mutex_unlock(&tu->serialize);
-+#else
-+ /* No gadget mode configured, so do not allow host controlled to be set */
-+ return -EINVAL;
-+#endif
-+
-+ return 0;
-+}
-+
-+static irqreturn_t tahvo_usb_vbus_interrupt(int irq, void *_tu)
-+{
-+ struct tahvo_usb *tu = _tu;
-+
-+ check_vbus_state(tu);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+#ifdef CONFIG_USB_OTG
-+static ssize_t otg_mode_show(struct device *device,
-+ struct device_attribute *attr, char *buf)
-+{
-+ struct tahvo_usb *tu = dev_get_drvdata(device);
-+ switch (tu->tahvo_mode) {
-+ case TAHVO_MODE_HOST:
-+ return sprintf(buf, "host\n");
-+ case TAHVO_MODE_PERIPHERAL:
-+ return sprintf(buf, "peripheral\n");
-+ }
-+ return sprintf(buf, "unknown\n");
-+}
-+
-+static ssize_t otg_mode_store(struct device *device,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ struct tahvo_usb *tu = dev_get_drvdata(device);
-+ int r;
-+
-+ r = strlen(buf);
-+ mutex_lock(&tu->serialize);
-+ if (strncmp(buf, "host", 4) == 0) {
-+ if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
-+ tahvo_usb_stop_peripheral(tu);
-+ tu->tahvo_mode = TAHVO_MODE_HOST;
-+ if (tu->otg.host) {
-+ printk(KERN_INFO "Selected HOST mode: host controller present.\n");
-+ tahvo_usb_become_host(tu);
-+ } else {
-+ printk(KERN_INFO "Selected HOST mode: no host controller, powering off.\n");
-+ tahvo_usb_power_off(tu);
-+ }
-+ } else if (strncmp(buf, "peripheral", 10) == 0) {
-+ if (tu->tahvo_mode == TAHVO_MODE_HOST)
-+ tahvo_usb_stop_host(tu);
-+ tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
-+ if (tu->otg.gadget) {
-+ printk(KERN_INFO "Selected PERIPHERAL mode: gadget driver present.\n");
-+ tahvo_usb_become_peripheral(tu);
-+ } else {
-+ printk(KERN_INFO "Selected PERIPHERAL mode: no gadget driver, powering off.\n");
-+ tahvo_usb_power_off(tu);
-+ }
-+ } else
-+ r = -EINVAL;
-+
-+ mutex_unlock(&tu->serialize);
-+ return r;
-+}
-+
-+static DEVICE_ATTR(otg_mode, 0644, otg_mode_show, otg_mode_store);
-+#endif
-+
-+static int __init tahvo_usb_probe(struct platform_device *pdev)
-+{
-+ struct tahvo_usb *tu;
-+ struct device *dev = &pdev->dev;
-+ int ret;
-+ int irq;
-+
-+ dev_dbg(dev, "probe\n");
-+
-+ /* Create driver data */
-+ tu = kzalloc(sizeof(*tu), GFP_KERNEL);
-+ if (!tu)
-+ return -ENOMEM;
-+ tahvo_usb_device = tu;
-+
-+ tu->dev = dev;
-+ tu->pt_dev = pdev;
-+#ifdef CONFIG_USB_OTG
-+ /* Default mode */
-+#ifdef CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT
-+ tu->tahvo_mode = TAHVO_MODE_HOST;
-+#else
-+ tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
-+#endif
-+#endif
-+
-+ mutex_init(&tu->serialize);
-+
-+ tu->ick = clk_get(NULL, "usb_l4_ick");
-+ if (IS_ERR(tu->ick)) {
-+ dev_err(dev, "Failed to get usb_l4_ick\n");
-+ ret = PTR_ERR(tu->ick);
-+ goto err_free_tu;
-+ }
-+ clk_enable(tu->ick);
-+
-+ /* Set initial state, so that we generate kevents only on
-+ * state changes */
-+ tu->vbus_state = tahvo_read_reg(tu->dev, TAHVO_REG_IDSR) & 0x01;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ tu->irq = irq;
-+
-+ /* We cannot enable interrupt until omap_udc is initialized */
-+ ret = request_threaded_irq(irq, NULL, tahvo_usb_vbus_interrupt,
-+ IRQF_ONESHOT, "tahvo-vbus", tu);
-+ if (ret != 0) {
-+ printk(KERN_ERR "Could not register Tahvo interrupt for VBUS\n");
-+ goto err_release_clk;
-+ }
-+
-+ /* Attributes */
-+ ret = device_create_file(dev, &dev_attr_vbus_state);
-+#ifdef CONFIG_USB_OTG
-+ ret |= device_create_file(dev, &dev_attr_otg_mode);
-+#endif
-+ if (ret)
-+ printk(KERN_ERR "attribute creation failed: %d\n", ret);
-+
-+ /* Create OTG interface */
-+ tahvo_usb_power_off(tu);
-+ tu->otg.state = OTG_STATE_UNDEFINED;
-+ tu->otg.label = DRIVER_NAME;
-+ tu->otg.set_host = tahvo_usb_set_host;
-+ tu->otg.set_peripheral = tahvo_usb_set_peripheral;
-+ tu->otg.set_power = tahvo_usb_set_power;
-+ tu->otg.set_suspend = tahvo_usb_set_suspend;
-+ tu->otg.start_srp = tahvo_usb_start_srp;
-+ tu->otg.start_hnp = tahvo_usb_start_hnp;
-+
-+ ret = otg_set_transceiver(&tu->otg);
-+ if (ret < 0) {
-+ printk(KERN_ERR "Cannot register USB transceiver\n");
-+ goto err_free_irq;
-+ }
-+
-+ dev_set_drvdata(dev, tu);
-+
-+ return 0;
-+
-+err_free_irq:
-+ free_irq(tu->irq, tu);
-+err_release_clk:
-+ clk_disable(tu->ick);
-+ clk_put(tu->ick);
-+err_free_tu:
-+ kfree(tu);
-+ tahvo_usb_device = NULL;
-+
-+ return ret;
-+}
-+
-+static int __exit tahvo_usb_remove(struct platform_device *pdev)
-+{
-+ struct tahvo_usb *tu = platform_get_drvdata(pdev);
-+
-+ dev_dbg(&pdev->dev, "remove\n");
-+
-+ free_irq(tu->irq, tu);
-+ flush_scheduled_work();
-+ otg_set_transceiver(0);
-+ device_remove_file(&pdev->dev, &dev_attr_vbus_state);
-+#ifdef CONFIG_USB_OTG
-+ device_remove_file(&pdev->dev, &dev_attr_otg_mode);
-+#endif
-+ clk_disable(tu->ick);
-+ clk_put(tu->ick);
-+
-+ kfree(tu);
-+ tahvo_usb_device = NULL;
-+
-+ return 0;
-+}
-+
-+static struct platform_driver tahvo_usb_driver = {
-+ .driver = {
-+ .name = "tahvo-usb",
-+ },
-+ .remove = __exit_p(tahvo_usb_remove),
-+};
-+
-+static int __init tahvo_usb_init(void)
-+{
-+ int ret = 0;
-+
-+ ret = platform_driver_probe(&tahvo_usb_driver, tahvo_usb_probe);
-+ if (ret)
-+ return ret;
-+
-+ ret = platform_driver_probe(&omap_otg_driver, omap_otg_probe);
-+ if (ret) {
-+ platform_driver_unregister(&tahvo_usb_driver);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+subsys_initcall(tahvo_usb_init);
-+
-+static void __exit tahvo_usb_exit(void)
-+{
-+ platform_driver_unregister(&omap_otg_driver);
-+ platform_driver_unregister(&tahvo_usb_driver);
-+}
-+module_exit(tahvo_usb_exit);
-+
-+MODULE_DESCRIPTION("Tahvo USB OTG Transceiver Driver");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Juha Yrjölä, Tony Lindgren, and Timo Teräs");
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -78,7 +78,7 @@ obj-$(CONFIG_GAMEPORT) += input/gamepor
- obj-$(CONFIG_INPUT) += input/
- obj-$(CONFIG_I2O) += message/
- obj-$(CONFIG_RTC_LIB) += rtc/
--obj-y += i2c/ media/
-+obj-y += i2c/ media/ cbus/
- obj-$(CONFIG_PPS) += pps/
- obj-$(CONFIG_PTP_1588_CLOCK) += ptp/
- obj-$(CONFIG_W1) += w1/
---- a/drivers/Kconfig
-+++ b/drivers/Kconfig
-@@ -2,6 +2,8 @@ menu "Device Drivers"
-
- source "drivers/base/Kconfig"
-
-+source "drivers/cbus/Kconfig"
-+
- source "drivers/connector/Kconfig"
-
- source "drivers/mtd/Kconfig"
+++ /dev/null
---- a/drivers/cbus/tahvo.c
-+++ b/drivers/cbus/tahvo.c
-@@ -104,7 +104,9 @@ void tahvo_write_reg(struct device *chil
- {
- struct tahvo *tahvo = dev_get_drvdata(child->parent);
-
-+ mutex_lock(&tahvo->mutex);
- __tahvo_write_reg(tahvo, reg, val);
-+ mutex_unlock(&tahvo->mutex);
- }
- EXPORT_SYMBOL(tahvo_write_reg);
-
+++ /dev/null
---- a/drivers/cbus/retu.c
-+++ b/drivers/cbus/retu.c
-@@ -53,9 +53,6 @@ struct retu {
-
- int irq;
-
-- int ack;
-- bool ack_pending;
--
- int mask;
- bool mask_pending;
-
-@@ -191,9 +188,10 @@ static irqreturn_t retu_irq_handler(int
- mutex_lock(&retu->mutex);
- idr = __retu_read_reg(retu, RETU_REG_IDR);
- imr = __retu_read_reg(retu, RETU_REG_IMR);
-+ idr &= ~imr;
-+ __retu_write_reg(retu, RETU_REG_IDR, idr);
- mutex_unlock(&retu->mutex);
-
-- idr &= ~imr;
- if (!idr) {
- dev_vdbg(retu->dev, "No IRQ, spurious?\n");
- return IRQ_NONE;
-@@ -232,15 +230,6 @@ static void retu_irq_unmask(struct irq_d
-
- }
-
--static void retu_irq_ack(struct irq_data *data)
--{
-- struct retu *retu = irq_data_get_irq_chip_data(data);
-- int irq = data->irq;
--
-- retu->ack |= (1 << (irq - retu->irq_base));
-- retu->ack_pending = true;
--}
--
- static void retu_bus_lock(struct irq_data *data)
- {
- struct retu *retu = irq_data_get_irq_chip_data(data);
-@@ -257,11 +246,6 @@ static void retu_bus_sync_unlock(struct
- retu->mask_pending = false;
- }
-
-- if (retu->ack_pending) {
-- __retu_write_reg(retu, RETU_REG_IDR, retu->ack);
-- retu->ack_pending = false;
-- }
--
- mutex_unlock(&retu->mutex);
- }
-
-@@ -271,7 +255,6 @@ static struct irq_chip retu_irq_chip = {
- .irq_bus_sync_unlock = retu_bus_sync_unlock,
- .irq_mask = retu_irq_mask,
- .irq_unmask = retu_irq_unmask,
-- .irq_ack = retu_irq_ack,
- };
-
- static inline void retu_irq_setup(int irq)
-@@ -291,8 +274,7 @@ static void retu_irq_init(struct retu *r
-
- for (irq = base; irq < end; irq++) {
- irq_set_chip_data(irq, retu);
-- irq_set_chip_and_handler(irq, &retu_irq_chip,
-- handle_simple_irq);
-+ irq_set_chip(irq, &retu_irq_chip);
- irq_set_nested_thread(irq, 1);
- retu_irq_setup(irq);
- }
---- a/drivers/cbus/tahvo.c
-+++ b/drivers/cbus/tahvo.c
-@@ -48,11 +48,9 @@ struct tahvo {
- int irq_end;
- int irq;
-
-- int ack;
- int mask;
-
- unsigned int mask_pending:1;
-- unsigned int ack_pending:1;
- unsigned int is_betty:1;
- };
-
-@@ -138,9 +136,12 @@ static irqreturn_t tahvo_irq_handler(int
- u16 id;
- u16 im;
-
-+ mutex_lock(&tahvo->mutex);
- id = __tahvo_read_reg(tahvo, TAHVO_REG_IDR);
- im = __tahvo_read_reg(tahvo, TAHVO_REG_IMR);
- id &= ~im;
-+ __tahvo_write_reg(tahvo, TAHVO_REG_IDR, id);
-+ mutex_unlock(&tahvo->mutex);
-
- if (!id) {
- dev_vdbg(tahvo->dev, "No IRQ, spurious ?\n");
-@@ -177,11 +178,6 @@ static void tahvo_irq_bus_sync_unlock(st
- tahvo->mask_pending = false;
- }
-
-- if (tahvo->ack_pending) {
-- __tahvo_write_reg(tahvo, TAHVO_REG_IDR, tahvo->ack);
-- tahvo->ack_pending = false;
-- }
--
- mutex_unlock(&tahvo->mutex);
- }
-
-@@ -203,22 +199,12 @@ static void tahvo_irq_unmask(struct irq_
- tahvo->mask_pending = true;
- }
-
--static void tahvo_irq_ack(struct irq_data *data)
--{
-- struct tahvo *tahvo = irq_data_get_irq_chip_data(data);
-- int irq = data->irq;
--
-- tahvo->ack |= (1 << (irq - tahvo->irq_base));
-- tahvo->ack_pending = true;
--}
--
- static struct irq_chip tahvo_irq_chip = {
- .name = "tahvo",
- .irq_bus_lock = tahvo_irq_bus_lock,
- .irq_bus_sync_unlock = tahvo_irq_bus_sync_unlock,
- .irq_mask = tahvo_irq_mask,
- .irq_unmask = tahvo_irq_unmask,
-- .irq_ack = tahvo_irq_ack,
- };
-
- static inline void tahvo_irq_setup(int irq)
-@@ -238,8 +224,7 @@ static void tahvo_irq_init(struct tahvo
-
- for (irq = base; irq < end; irq++) {
- irq_set_chip_data(irq, tahvo);
-- irq_set_chip_and_handler(irq, &tahvo_irq_chip,
-- handle_simple_irq);
-+ irq_set_chip(irq, &tahvo_irq_chip);
- irq_set_nested_thread(irq, 1);
- tahvo_irq_setup(irq);
- }
+++ /dev/null
---- a/drivers/cbus/retu.c
-+++ b/drivers/cbus/retu.c
-@@ -451,7 +451,8 @@ static int __devinit retu_probe(struct p
- (rev >> 4) & 0x07, rev & 0x0f);
-
- /* Mask all RETU interrupts */
-- __retu_write_reg(retu, RETU_REG_IMR, 0xffff);
-+ retu->mask = 0xFFFF;
-+ __retu_write_reg(retu, RETU_REG_IMR, retu->mask);
-
- ret = request_threaded_irq(retu->irq, NULL, retu_irq_handler,
- IRQF_ONESHOT, "retu", retu);
---- a/drivers/cbus/tahvo.c
-+++ b/drivers/cbus/tahvo.c
-@@ -346,7 +346,8 @@ static int __devinit tahvo_probe(struct
- (rev >> 4) & 0x0f, rev & 0x0f);
-
- /* Mask all TAHVO interrupts */
-- __tahvo_write_reg(tahvo, TAHVO_REG_IMR, 0xffff);
-+ tahvo->mask = 0xFFFF;
-+ __tahvo_write_reg(tahvo, TAHVO_REG_IMR, tahvo->mask);
-
- ret = request_threaded_irq(irq, NULL, tahvo_irq_handler,
- IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+++ /dev/null
---- a/arch/arm/mach-omap2/board-n8x0.c
-+++ b/arch/arm/mach-omap2/board-n8x0.c
-@@ -15,8 +15,11 @@
- #include <linux/delay.h>
- #include <linux/gpio.h>
- #include <linux/init.h>
-+#include <linux/irq.h>
- #include <linux/io.h>
- #include <linux/stddef.h>
-+#include <linux/platform_device.h>
-+#include <linux/platform_data/cbus.h>
- #include <linux/i2c.h>
- #include <linux/spi/spi.h>
- #include <linux/usb/musb.h>
-@@ -193,6 +196,110 @@ static struct omap_onenand_platform_data
- };
- #endif
-
-+#if defined(CONFIG_CBUS) || defined(CONFIG_CBUS_MODULE)
-+
-+static struct cbus_host_platform_data n8x0_cbus_data = {
-+ .clk_gpio = 66,
-+ .dat_gpio = 65,
-+ .sel_gpio = 64,
-+};
-+
-+static struct platform_device n8x0_cbus_device = {
-+ .name = "cbus",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &n8x0_cbus_data,
-+ },
-+};
-+
-+static struct resource retu_resource[] = {
-+ {
-+ .start = -EINVAL, /* set later */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct cbus_retu_platform_data n8x0_retu_data = {
-+ .devid = CBUS_RETU_DEVICE_ID,
-+};
-+
-+static struct platform_device retu_device = {
-+ .name = "retu",
-+ .id = -1,
-+ .resource = retu_resource,
-+ .num_resources = ARRAY_SIZE(retu_resource),
-+ .dev = {
-+ .platform_data = &n8x0_retu_data,
-+ .parent = &n8x0_cbus_device.dev,
-+ },
-+};
-+
-+static struct resource tahvo_resource[] = {
-+ {
-+ .start = -EINVAL, /* set later */
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct platform_device tahvo_device = {
-+ .name = "tahvo",
-+ .id = -1,
-+ .resource = tahvo_resource,
-+ .num_resources = ARRAY_SIZE(tahvo_resource),
-+ .dev = {
-+ .parent = &n8x0_cbus_device.dev,
-+ },
-+};
-+
-+static void __init n8x0_cbus_init(void)
-+{
-+ int ret;
-+
-+ platform_device_register(&n8x0_cbus_device);
-+
-+ ret = gpio_request(108, "RETU irq");
-+ if (ret < 0) {
-+ pr_err("retu: Unable to reserve IRQ GPIO\n");
-+ return;
-+ }
-+
-+ ret = gpio_direction_input(108);
-+ if (ret < 0) {
-+ pr_err("retu: Unable to change gpio direction\n");
-+ gpio_free(108);
-+ return;
-+ }
-+
-+ irq_set_irq_type(gpio_to_irq(108), IRQ_TYPE_EDGE_RISING);
-+ retu_resource[0].start = gpio_to_irq(108);
-+ platform_device_register(&retu_device);
-+
-+ ret = gpio_request(111, "TAHVO irq");
-+ if (ret) {
-+ pr_err("tahvo: Unable to reserve IRQ GPIO\n");
-+ gpio_free(108);
-+ return;
-+ }
-+
-+ /* Set the pin as input */
-+ ret = gpio_direction_input(111);
-+ if (ret) {
-+ pr_err("tahvo: Unable to change direction\n");
-+ gpio_free(108);
-+ gpio_free(111);
-+ return;
-+ }
-+
-+ tahvo_resource[0].start = gpio_to_irq(111);
-+ platform_device_register(&tahvo_device);
-+}
-+
-+#else
-+static inline void __init n8x0_cbus_init(void)
-+{
-+}
-+#endif
-+
- #if defined(CONFIG_MENELAUS) && \
- (defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
-
-@@ -671,6 +778,8 @@ static inline void board_serial_init(voi
- static void __init n8x0_init_machine(void)
- {
- omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
-+ n8x0_cbus_init();
-+
- /* FIXME: add n810 spi devices */
- spi_register_board_info(n800_spi_board_info,
- ARRAY_SIZE(n800_spi_board_info));
---- /dev/null
-+++ b/include/linux/platform_data/cbus.h
-@@ -0,0 +1,38 @@
-+/*
-+ * cbus.h - CBUS platform_data definition
-+ *
-+ * Copyright (C) 2004 - 2009 Nokia Corporation
-+ *
-+ * Written by Felipe Balbi <felipe.balbi@nokia.com>
-+ *
-+ * This file is subject to the terms and conditions of the GNU General
-+ * Public License. See the file "COPYING" in the main directory of this
-+ * archive for more details.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+
-+#ifndef __INCLUDE_LINUX_CBUS_H
-+#define __INCLUDE_LINUX_CBUS_H
-+
-+#define CBUS_RETU_DEVICE_ID 0x01
-+#define CBUS_TAHVO_DEVICE_ID 0x02
-+
-+struct cbus_host_platform_data {
-+ int dat_gpio;
-+ int clk_gpio;
-+ int sel_gpio;
-+};
-+
-+struct cbus_retu_platform_data {
-+ int devid;
-+};
-+
-+#endif /* __INCLUDE_LINUX_CBUS_H */
+++ /dev/null
---- a/drivers/video/omap/omapfb_main.c
-+++ b/drivers/video/omap/omapfb_main.c
-@@ -420,10 +420,10 @@ static void set_fb_fix(struct fb_info *f
- fbi->screen_base = rg->vaddr;
-
- if (!from_init) {
-- mutex_lock(&fbi->mm_lock);
-+ preempt_disable();
- fix->smem_start = rg->paddr;
- fix->smem_len = rg->size;
-- mutex_unlock(&fbi->mm_lock);
-+ preempt_enable();
- } else {
- fix->smem_start = rg->paddr;
- fix->smem_len = rg->size;
-@@ -933,10 +933,10 @@ static int omapfb_setup_mem(struct fb_in
- * plane memory is dealloce'd, the other
- * screen parameters in var / fix are invalid.
- */
-- mutex_lock(&fbi->mm_lock);
-+ preempt_disable();
- fbi->fix.smem_start = 0;
- fbi->fix.smem_len = 0;
-- mutex_unlock(&fbi->mm_lock);
-+ preempt_enable();
- }
- }
- }
---- a/drivers/video/fbmem.c
-+++ b/drivers/video/fbmem.c
-@@ -1383,8 +1383,10 @@ fb_mmap(struct file *file, struct vm_are
- }
-
- /* frame buffer memory */
-+ preempt_disable();
- start = info->fix.smem_start;
- len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.smem_len);
-+ preempt_enable();
- if (off >= len) {
- /* memory mapped io */
- off -= len;
+++ /dev/null
---- a/arch/arm/mach-omap2/board-n8x0.c
-+++ b/arch/arm/mach-omap2/board-n8x0.c
-@@ -24,6 +24,7 @@
- #include <linux/spi/spi.h>
- #include <linux/usb/musb.h>
- #include <sound/tlv320aic3x.h>
-+#include <linux/spi/tsc2005.h>
-
- #include <asm/mach/arch.h>
- #include <asm/mach-types.h>
-@@ -43,6 +44,66 @@ static int slot1_cover_open;
- static int slot2_cover_open;
- static struct device *mmc_device;
-
-+#define RX51_TSC2005_RESET_GPIO 94
-+#define RX51_TSC2005_IRQ_GPIO 106
-+
-+#ifdef CONFIG_TOUCHSCREEN_TSC2005
-+static struct tsc2005_platform_data tsc2005_config;
-+static void rx51_tsc2005_set_reset(bool enable)
-+{
-+ gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
-+}
-+
-+static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
-+ .turbo_mode = 0,
-+ .single_channel = 1,
-+};
-+#endif
-+
-+static void __init tsc2005_set_config(void)
-+{
-+ const struct omap_lcd_config *conf;
-+
-+ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
-+ if (conf != NULL) {
-+#ifdef CONFIG_TOUCHSCREEN_TSC2005
-+ if (strcmp(conf->panel_name, "lph8923") == 0) {
-+ tsc2005_config.ts_x_plate_ohm = 180;
-+ tsc2005_config.ts_pressure_max = 2048;
-+ tsc2005_config.ts_pressure_fudge = 2;
-+ tsc2005_config.ts_x_max = 4096;
-+ tsc2005_config.ts_x_fudge = 4;
-+ tsc2005_config.ts_y_max = 4096;
-+ tsc2005_config.ts_y_fudge = 7;
-+ tsc2005_config.set_reset = rx51_tsc2005_set_reset;
-+ } else if (strcmp(conf->panel_name, "ls041y3") == 0) {
-+ tsc2005_config.ts_x_plate_ohm = 280;
-+ tsc2005_config.ts_pressure_max = 2048;
-+ tsc2005_config.ts_pressure_fudge = 2;
-+ tsc2005_config.ts_x_max = 4096;
-+ tsc2005_config.ts_x_fudge = 4;
-+ tsc2005_config.ts_y_max = 4096;
-+ tsc2005_config.ts_y_fudge = 7;
-+ tsc2005_config.set_reset = rx51_tsc2005_set_reset;
-+ } else {
-+ printk(KERN_ERR "Unknown panel type, set default "
-+ "touchscreen configuration\n");
-+ tsc2005_config.ts_x_plate_ohm = 200;
-+ }
-+#endif
-+ }
-+}
-+
-+static struct omap2_mcspi_device_config mipid_mcspi_config = {
-+ .turbo_mode = 0,
-+ .single_channel = 1,
-+};
-+
-+extern struct mipid_platform_data n8x0_mipid_platform_data;
-+
-+extern void n8x0_mipid_init(void);
-+extern void n8x0_blizzard_init(void);
-+
- #define TUSB6010_ASYNC_CS 1
- #define TUSB6010_SYNC_CS 4
- #define TUSB6010_GPIO_INT 58
-@@ -145,12 +206,29 @@ static struct omap2_mcspi_device_config
-
- static struct spi_board_info n800_spi_board_info[] __initdata = {
- {
-+ .modalias = "lcd_mipid",
-+ .bus_num = 1,
-+ .chip_select = 1,
-+ .max_speed_hz = 4000000,
-+ .controller_data= &mipid_mcspi_config,
-+ .platform_data = &n8x0_mipid_platform_data,
-+ },
-+ {
- .modalias = "p54spi",
- .bus_num = 2,
- .chip_select = 0,
- .max_speed_hz = 48000000,
- .controller_data = &p54spi_mcspi_config,
- },
-+ {
-+ .modalias = "tsc2005",
-+ .bus_num = 1,
-+ .chip_select = 0,
-+ .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),
-+ .max_speed_hz = 6000000,
-+ .controller_data = &tsc2005_mcspi_config,
-+ .platform_data = &tsc2005_config,
-+ },
- };
-
- #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-@@ -781,6 +859,7 @@ static void __init n8x0_init_machine(voi
- n8x0_cbus_init();
-
- /* FIXME: add n810 spi devices */
-+ tsc2005_set_config();
- spi_register_board_info(n800_spi_board_info,
- ARRAY_SIZE(n800_spi_board_info));
- omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
-@@ -790,6 +869,8 @@ static void __init n8x0_init_machine(voi
- i2c_register_board_info(2, n810_i2c_board_info_2,
- ARRAY_SIZE(n810_i2c_board_info_2));
- board_serial_init();
-+ n8x0_mipid_init();
-+ n8x0_blizzard_init();
- omap_sdrc_init(NULL, NULL);
- gpmc_onenand_init(board_onenand_data);
- n8x0_mmc_init();
---- /dev/null
-+++ b/arch/arm/mach-omap2/board-n8x0-lcd.c
-@@ -0,0 +1,231 @@
-+/*
-+ * linux/arch/arm/mach-omap2/board-n8x0.c
-+ *
-+ * Copyright (C) 2005-2009 Nokia Corporation
-+ * Author: Juha Yrjola <juha.yrjola@nokia.com>
-+ *
-+ * Modified from mach-omap2/board-generic.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/gpio.h>
-+#include <linux/omapfb.h>
-+
-+#include <plat/lcd_mipid.h>
-+#include <plat/blizzard.h>
-+
-+#include "../../../drivers/cbus/tahvo.h"
-+
-+
-+struct tahvo_pwm_device {
-+ struct device *dev;
-+ int tahvo_7bit_backlight;
-+};
-+
-+static struct tahvo_pwm_device *tahvo_pwm;
-+
-+static unsigned int tahvo_pwm_get_backlight_level(struct tahvo_pwm_device *pd)
-+{
-+ unsigned int mask;
-+
-+ if (pd->tahvo_7bit_backlight)
-+ mask = 0x7f;
-+ else
-+ mask = 0x0f;
-+ return tahvo_read_reg(pd->dev, TAHVO_REG_LEDPWMR) & mask;
-+}
-+
-+static unsigned int tahvo_pwm_get_max_backlight_level(struct tahvo_pwm_device *pd)
-+{
-+ if (pd->tahvo_7bit_backlight)
-+ return 0x7f;
-+ return 0x0f;
-+}
-+
-+static void tahvo_pwm_set_backlight_level(struct tahvo_pwm_device *pd, unsigned int level)
-+{
-+ unsigned int max_level;
-+
-+ max_level = tahvo_pwm_get_max_backlight_level(pd);
-+ if (level > max_level)
-+ level = max_level;
-+ tahvo_write_reg(pd->dev, TAHVO_REG_LEDPWMR, level);
-+}
-+
-+static int __init n8x0_tahvo_pwm_probe(struct platform_device *pdev)
-+{
-+ struct tahvo_pwm_device *pd;
-+ unsigned int rev, id;
-+
-+ pd = kzalloc(sizeof(*pd), GFP_KERNEL);
-+ if (WARN_ON(!pd))
-+ return -ENOMEM;
-+ pd->dev = &pdev->dev;
-+
-+ rev = tahvo_read_reg(pd->dev, TAHVO_REG_ASICR);
-+ id = (rev >> 8) & 0xff;
-+ if (id == 0x03) {
-+ if ((rev & 0xff) >= 0x50)
-+ pd->tahvo_7bit_backlight = 1;
-+ } else if (id == 0x0b)
-+ pd->tahvo_7bit_backlight = 1;
-+
-+ dev_set_drvdata(pd->dev, pd);
-+ tahvo_pwm = pd;
-+
-+ return 0;
-+}
-+
-+static struct platform_driver n8x0_tahvo_pwm_driver = {
-+ .driver = {
-+ .name = "tahvo-pwm",
-+ },
-+};
-+
-+static int __init n8x0_tahvo_pwm_init(void)
-+{
-+ return platform_driver_probe(&n8x0_tahvo_pwm_driver, n8x0_tahvo_pwm_probe);
-+}
-+fs_initcall(n8x0_tahvo_pwm_init);
-+
-+static int n8x0_get_backlight_level(struct mipid_platform_data *pdata)
-+{
-+ return tahvo_pwm_get_backlight_level(tahvo_pwm);
-+}
-+
-+static int n8x0_get_max_backlight_level(struct mipid_platform_data *pdata)
-+{
-+ return tahvo_pwm_get_max_backlight_level(tahvo_pwm);
-+}
-+
-+static void n8x0_set_backlight_level(struct mipid_platform_data *pdata, int level)
-+{
-+ tahvo_pwm_set_backlight_level(tahvo_pwm, level);
-+}
-+
-+#define N8X0_BLIZZARD_POWERDOWN_GPIO 15
-+
-+// MIPID LCD Panel
-+
-+static void mipid_shutdown(struct mipid_platform_data *pdata)
-+{
-+ if (pdata->nreset_gpio != -1) {
-+ pr_info("shutdown LCD\n");
-+ gpio_set_value(pdata->nreset_gpio, 0);
-+ msleep(120);
-+ }
-+}
-+
-+struct mipid_platform_data n8x0_mipid_platform_data = {
-+ .shutdown = mipid_shutdown,
-+ .get_bklight_level = n8x0_get_backlight_level,
-+ .set_bklight_level = n8x0_set_backlight_level,
-+ .get_bklight_max = n8x0_get_max_backlight_level,
-+};
-+
-+void __init n8x0_mipid_init(void)
-+{
-+ const struct omap_lcd_config *conf;
-+ int err;
-+
-+ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
-+ if (conf != NULL) {
-+ n8x0_mipid_platform_data.nreset_gpio = conf->nreset_gpio;
-+ n8x0_mipid_platform_data.data_lines = conf->data_lines;
-+ if (conf->nreset_gpio != -1) {
-+ err = gpio_request(conf->nreset_gpio, "MIPID nreset");
-+ if (err) {
-+ printk(KERN_ERR "N8x0 MIPID failed to request nreset GPIO %d\n",
-+ conf->nreset_gpio);
-+ } else {
-+ err = gpio_direction_output(conf->nreset_gpio, 1);
-+ if (err) {
-+ printk(KERN_ERR "N8x0 MIPID failed to set nreset GPIO %d\n",
-+ conf->nreset_gpio);
-+ }
-+ }
-+ }
-+ printk(KERN_INFO "N8x0 MIPID config loaded");
-+ }
-+ else
-+ printk(KERN_INFO "N8x0 MIPID config not provided");
-+}
-+
-+
-+// Epson Blizzard LCD Controller
-+
-+static struct {
-+ struct clk *sys_ck;
-+} blizzard;
-+
-+static int blizzard_get_clocks(void)
-+{
-+ blizzard.sys_ck = clk_get(0, "osc_ck");
-+ if (IS_ERR(blizzard.sys_ck)) {
-+ printk(KERN_ERR "can't get Blizzard clock\n");
-+ return PTR_ERR(blizzard.sys_ck);
-+ }
-+ return 0;
-+}
-+
-+static unsigned long blizzard_get_clock_rate(struct device *dev)
-+{
-+ return clk_get_rate(blizzard.sys_ck);
-+}
-+
-+static void blizzard_enable_clocks(int enable)
-+{
-+ if (enable)
-+ clk_enable(blizzard.sys_ck);
-+ else
-+ clk_disable(blizzard.sys_ck);
-+}
-+
-+static void blizzard_power_up(struct device *dev)
-+{
-+ /* Vcore to 1.475V */
-+ tahvo_set_clear_reg_bits(tahvo_pwm->dev, 0x07, 0, 0xf);
-+ msleep(10);
-+
-+ blizzard_enable_clocks(1);
-+ gpio_set_value(N8X0_BLIZZARD_POWERDOWN_GPIO, 1);
-+}
-+
-+static void blizzard_power_down(struct device *dev)
-+{
-+ gpio_set_value(N8X0_BLIZZARD_POWERDOWN_GPIO, 0);
-+ blizzard_enable_clocks(0);
-+
-+ /* Vcore to 1.005V */
-+ tahvo_set_clear_reg_bits(tahvo_pwm->dev, 0x07, 0xf, 0);
-+}
-+
-+static struct blizzard_platform_data n8x0_blizzard_data = {
-+ .power_up = blizzard_power_up,
-+ .power_down = blizzard_power_down,
-+ .get_clock_rate = blizzard_get_clock_rate,
-+ .te_connected = 1,
-+};
-+
-+void __init n8x0_blizzard_init(void)
-+{
-+ int r;
-+
-+ r = gpio_request(N8X0_BLIZZARD_POWERDOWN_GPIO, "Blizzard pd");
-+ if (r < 0)
-+ {
-+ printk(KERN_ERR "Can't get N8x0 Blizzard powerdown GPIO %d\n", N8X0_BLIZZARD_POWERDOWN_GPIO);
-+ return;
-+ }
-+ gpio_direction_output(N8X0_BLIZZARD_POWERDOWN_GPIO, 1);
-+
-+ blizzard_get_clocks();
-+ omapfb_set_ctrl_platform_data(&n8x0_blizzard_data);
-+
-+ printk(KERN_INFO "N8x0 Blizzard initialized");
-+}
---- a/arch/arm/mach-omap2/Makefile
-+++ b/arch/arm/mach-omap2/Makefile
-@@ -205,6 +205,7 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-om
- obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
- obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
- obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
-+obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0-lcd.o
- obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
- sdram-nokia.o
- obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
+++ /dev/null
---- a/drivers/video/omap/dispc.c
-+++ b/drivers/video/omap/dispc.c
-@@ -923,14 +923,14 @@ static int get_dss_clocks(void)
- return PTR_ERR(dispc.dss_ick);
- }
-
-- dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "fck");
-+ dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss1_fck");
- if (IS_ERR(dispc.dss1_fck)) {
- dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
- clk_put(dispc.dss_ick);
- return PTR_ERR(dispc.dss1_fck);
- }
-
-- dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "tv_clk");
-+ dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss_54m_fck");
- if (IS_ERR(dispc.dss_54m_fck)) {
- dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
- clk_put(dispc.dss_ick);
---- a/drivers/video/omap/rfbi.c
-+++ b/drivers/video/omap/rfbi.c
-@@ -90,7 +90,7 @@ static int rfbi_get_clocks(void)
- return PTR_ERR(rfbi.dss_ick);
- }
-
-- rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "fck");
-+ rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "dss1_fck");
- if (IS_ERR(rfbi.dss1_fck)) {
- dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
- clk_put(rfbi.dss_ick);
+++ /dev/null
---- a/arch/arm/mach-omap2/omap_hwmod.c
-+++ b/arch/arm/mach-omap2/omap_hwmod.c
-@@ -146,6 +146,8 @@
- #include <plat/omap_hwmod.h>
- #include <plat/prcm.h>
-
-+#include <asm/mach-types.h>
-+
- #include "cm2xxx_3xxx.h"
- #include "cminst44xx.h"
- #include "prm2xxx_3xxx.h"
-@@ -1769,6 +1771,16 @@ static int _setup(struct omap_hwmod *oh,
-
- oh->_state = _HWMOD_STATE_INITIALIZED;
-
-+ if (machine_is_nokia770() ||
-+ machine_is_nokia_n800() ||
-+ machine_is_nokia_n810() ||
-+ machine_is_nokia_n810_wimax()) {
-+ /* Nokia N-series workaround: Don't reset any hwmod. Some drivers expect
-+ * the NOLO bootloader initializations to be effective. */
-+ oh->flags |= HWMOD_INIT_NO_RESET;
-+ printk_once(KERN_INFO "Nokia N-series HWMOD_INIT_NO_RESET workaround enabled\n");
-+ }
-+
- /*
- * In the case of hwmod with hardreset that should not be
- * de-assert at boot time, we have to keep the module
+++ /dev/null
-From 63e56392b9024aceb610d7b4e1979e2d2cebd217 Mon Sep 17 00:00:00 2001
-From: Marat Radchenko <marat@slonopotamus.org>
-Date: Tue, 18 Oct 2011 21:48:23 +0400
-Subject: [PATCH 1/2] TSC2301 driver (touchscreen and keypad)
-
-This patch adds support for TSC2301 touchscreen/keypad/audio chip found on Nokia N800.
-Touchscreen and keypad are fully functional, audio part only provides power management.
----
- drivers/input/keyboard/Kconfig | 6 +
- drivers/input/keyboard/Makefile | 1 +
- drivers/input/keyboard/tsc2301_kp.c | 475 +++++++++++++++
- drivers/input/touchscreen/Kconfig | 6 +
- drivers/input/touchscreen/Makefile | 1 +
- drivers/input/touchscreen/tsc2301_ts.c | 676 +++++++++++++++++++++
- drivers/spi/Kconfig | 22 +
- drivers/spi/Makefile | 3 +
- drivers/spi/tsc2301-core.c | 297 ++++++++++
- drivers/spi/tsc2301-mixer.c | 1003 ++++++++++++++++++++++++++++++++
- include/linux/spi/tsc2301.h | 208 +++++++
- 11 files changed, 2698 insertions(+), 0 deletions(-)
- create mode 100644 drivers/input/keyboard/tsc2301_kp.c
- create mode 100644 drivers/input/touchscreen/tsc2301_ts.c
- create mode 100644 drivers/spi/tsc2301-core.c
- create mode 100644 drivers/spi/tsc2301-mixer.c
- create mode 100644 include/linux/spi/tsc2301.h
-
---- a/drivers/input/keyboard/Kconfig
-+++ b/drivers/input/keyboard/Kconfig
-@@ -547,6 +547,12 @@ config KEYBOARD_TNETV107X
- To compile this driver as a module, choose M here: the
- module will be called tnetv107x-keypad.
-
-+config KEYBOARD_TSC2301
-+ tristate "TSC2301 keypad support"
-+ depends on SPI_TSC2301
-+ help
-+ Say Y here for if you are using the keypad features of TSC2301.
-+
- config KEYBOARD_TWL4030
- tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
- depends on TWL4030_CORE
---- a/drivers/input/keyboard/Makefile
-+++ b/drivers/input/keyboard/Makefile
-@@ -49,6 +49,7 @@ obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd
- obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o
- obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o
- obj-$(CONFIG_KEYBOARD_TNETV107X) += tnetv107x-keypad.o
-+obj-$(CONFIG_KEYBOARD_TSC2301) += tsc2301_kp.o
- obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
- obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
- obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o
---- /dev/null
-+++ b/drivers/input/keyboard/tsc2301_kp.c
-@@ -0,0 +1,475 @@
-+/*
-+ * TSC2301 keypad driver
-+ *
-+ * Copyright (C) 2005-2006 Nokia Corporation
-+ *
-+ * Written by Jarkko Oikarinen
-+ * Rewritten by Juha Yrjola <juha.yrjola@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/input.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/delay.h>
-+#include <linux/spi/spi.h>
-+
-+#include <linux/spi/tsc2301.h>
-+
-+#define TSC2301_KEYBOARD_PRODUCT_ID 0x0051
-+#define TSC2301_KEYBOARD_PRODUCT_VERSION 0x0001
-+#define TSC2301_DEBOUNCE_TIME_2MS 0x0000
-+#define TSC2301_DEBOUNCE_TIME_10MS 0x0800
-+#define TSC2301_DEBOUNCE_TIME_20MS 0x1000
-+#define TSC2301_DEBOUNCE_TIME_50MS 0x1800
-+#define TSC2301_DEBOUNCE_TIME_60MS 0x2000
-+#define TSC2301_DEBOUNCE_TIME_80MS 0x2800
-+#define TSC2301_DEBOUNCE_TIME_100MS 0x3000
-+#define TSC2301_DEBOUNCE_TIME_120MS 0x3800
-+
-+#define TSC2301_DEBOUNCE_TIME TSC2301_DEBOUNCE_TIME_20MS
-+
-+#define TSC2301_RELEASE_TIMEOUT 50
-+
-+struct tsc2301_kp {
-+ struct input_dev *idev;
-+ char phys[32];
-+ spinlock_t lock;
-+ struct mutex mutex;
-+ struct timer_list timer;
-+ u16 keys_pressed;
-+ unsigned pending:1;
-+ unsigned user_disabled:1;
-+ unsigned disable_depth;
-+
-+ struct spi_transfer read_xfer[4];
-+ struct spi_message read_msg;
-+
-+ u16 data;
-+ u16 mask;
-+
-+ int irq;
-+ s16 keymap[16];
-+};
-+
-+static inline int tsc2301_kp_disabled(struct tsc2301 *tsc)
-+{
-+ return tsc->kp->disable_depth != 0;
-+}
-+
-+static void tsc2301_kp_send_key_events(struct tsc2301 *tsc,
-+ u16 prev_state,
-+ u16 new_state)
-+{
-+ struct tsc2301_kp *kp = tsc->kp;
-+ u16 common, released, pressed;
-+ int i;
-+
-+ common = prev_state & new_state;
-+ released = common ^ prev_state;
-+ pressed = common ^ new_state;
-+ if (!released && !pressed)
-+ return;
-+ for (i = 0; i < 16 && (released || pressed); i++) {
-+ if (released & 1) {
-+ dev_dbg(&tsc->spi->dev, "key %d released\n", i);
-+ input_report_key(kp->idev, kp->keymap[i], 0);
-+ }
-+ released >>= 1;
-+ if (pressed & 1) {
-+ dev_dbg(&tsc->spi->dev, "key %d pressed\n", i);
-+ input_report_key(kp->idev, kp->keymap[i], 1);
-+ }
-+ pressed >>= 1;
-+ }
-+ input_sync(kp->idev);
-+}
-+
-+static inline void _filter_out(struct tsc2301 *tsc, u16 prev_state,
-+ u16 *new_state, int row1, int row2, u8 rect_pat)
-+{
-+ u16 mask;
-+
-+ mask = (rect_pat << (row1 * 4)) | (rect_pat << (row2 * 4));
-+ mask &= ~prev_state;
-+ *new_state &= ~mask;
-+ dev_dbg(&tsc->spi->dev, "filtering ghost keys %02x\n", mask);
-+}
-+
-+static void tsc2301_filter_ghost_keys(struct tsc2301 *tsc, u16 prev_state,
-+ u16 *new_state)
-+{
-+ int row1, row2;
-+ u16 key_map;
-+ u16 row1_map;
-+ static const u8 rect_pat[] = {
-+ 0x3, 0x5, 0x9, 0x6, 0xa, 0xc, 0,
-+ };
-+
-+ key_map = *new_state;
-+ for (row1 = 0; row1 < 4; row1++) {
-+ row1_map = (key_map >> (row1 * 4)) & 0xf;
-+ if (!row1_map)
-+ continue;
-+ for (row2 = row1 + 1; row2 < 4; row2++) {
-+ u16 rect_map = (key_map >> (row2 * 4)) & 0xf;
-+ const u8 *rp;
-+
-+ rect_map &= row1_map;
-+ if (!rect_map)
-+ continue;
-+ for (rp = rect_pat; *rp; rp++)
-+ if ((rect_map & *rp) == *rp)
-+ _filter_out(tsc, prev_state, new_state,
-+ row1, row2, *rp);
-+ }
-+ }
-+}
-+
-+static void tsc2301_kp_timer(unsigned long arg)
-+{
-+ struct tsc2301 *tsc = (void *) arg;
-+ struct tsc2301_kp *kp = tsc->kp;
-+ unsigned long flags;
-+
-+ tsc2301_kp_send_key_events(tsc, kp->keys_pressed, 0);
-+ spin_lock_irqsave(&kp->lock, flags);
-+ kp->keys_pressed = 0;
-+ spin_unlock_irqrestore(&kp->lock, flags);
-+}
-+
-+static void tsc2301_kp_rx(void *arg)
-+{
-+ struct tsc2301 *tsc = arg;
-+ struct tsc2301_kp *kp = tsc->kp;
-+ unsigned long flags;
-+ u16 kp_data;
-+
-+ kp_data = kp->data;
-+ dev_dbg(&tsc->spi->dev, "KP data %04x\n", kp_data);
-+
-+ tsc2301_filter_ghost_keys(tsc, kp->keys_pressed, &kp_data);
-+ tsc2301_kp_send_key_events(tsc, kp->keys_pressed, kp_data);
-+ spin_lock_irqsave(&kp->lock, flags);
-+ kp->keys_pressed = kp_data;
-+ kp->pending = 0;
-+ spin_unlock_irqrestore(&kp->lock, flags);
-+}
-+
-+static irqreturn_t tsc2301_kp_irq_handler(int irq, void *dev_id)
-+{
-+ struct tsc2301 *tsc = dev_id;
-+ struct tsc2301_kp *kp = tsc->kp;
-+ unsigned long flags;
-+ int r;
-+
-+ spin_lock_irqsave(&kp->lock, flags);
-+ if (tsc2301_kp_disabled(tsc)) {
-+ spin_unlock_irqrestore(&kp->lock, flags);
-+ return IRQ_HANDLED;
-+ }
-+ kp->pending = 1;
-+ spin_unlock_irqrestore(&kp->lock, flags);
-+ mod_timer(&kp->timer,
-+ jiffies + msecs_to_jiffies(TSC2301_RELEASE_TIMEOUT));
-+ r = spi_async(tsc->spi, &tsc->kp->read_msg);
-+ if (r)
-+ dev_err(&tsc->spi->dev, "kp: spi_async() failed");
-+ return IRQ_HANDLED;
-+}
-+
-+static void tsc2301_kp_start_scan(struct tsc2301 *tsc)
-+{
-+ tsc2301_write_reg(tsc, TSC2301_REG_KPMASK, tsc->kp->mask);
-+ tsc2301_write_reg(tsc, TSC2301_REG_KEY, TSC2301_DEBOUNCE_TIME);
-+}
-+
-+static void tsc2301_kp_stop_scan(struct tsc2301 *tsc)
-+{
-+ tsc2301_write_reg(tsc, TSC2301_REG_KEY, 1 << 14);
-+}
-+
-+/* Must be called with the mutex held */
-+static void tsc2301_kp_enable(struct tsc2301 *tsc)
-+{
-+ struct tsc2301_kp *kp = tsc->kp;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&kp->lock, flags);
-+ BUG_ON(!tsc2301_kp_disabled(tsc));
-+ if (--kp->disable_depth != 0) {
-+ spin_unlock_irqrestore(&kp->lock, flags);
-+ return;
-+ }
-+ spin_unlock_irqrestore(&kp->lock, flags);
-+
-+ irq_set_irq_type(kp->irq, IRQ_TYPE_EDGE_FALLING);
-+ tsc2301_kp_start_scan(tsc);
-+ enable_irq(kp->irq);
-+}
-+
-+/* Must be called with the mutex held */
-+static int tsc2301_kp_disable(struct tsc2301 *tsc, int release_keys)
-+{
-+ struct tsc2301_kp *kp = tsc->kp;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&kp->lock, flags);
-+ if (kp->disable_depth++ != 0) {
-+ spin_unlock_irqrestore(&kp->lock, flags);
-+ goto out;
-+ }
-+ disable_irq_nosync(kp->irq);
-+ irq_set_irq_type(kp->irq, IRQ_TYPE_NONE);
-+ spin_unlock_irqrestore(&kp->lock, flags);
-+
-+ while (kp->pending) {
-+ msleep(1);
-+ }
-+
-+ tsc2301_kp_stop_scan(tsc);
-+out:
-+ if (!release_keys)
-+ del_timer(&kp->timer); /* let timeout release keys */
-+
-+ return 0;
-+}
-+
-+/* The following workaround is needed for a HW bug triggered by the
-+ * following:
-+ * 1. keep any key pressed
-+ * 2. disable keypad
-+ * 3. release all keys
-+ * 4. reenable keypad
-+ * 5. disable touch screen controller
-+ *
-+ * After this the keypad scanner will get stuck in busy state and won't
-+ * report any interrupts for further keypresses. One way to recover is to
-+ * restart the keypad scanner whenever we enable / disable the
-+ * touchscreen controller.
-+ */
-+void tsc2301_kp_restart(struct tsc2301 *tsc)
-+{
-+ if (!tsc2301_kp_disabled(tsc)) {
-+ tsc2301_kp_start_scan(tsc);
-+ }
-+}
-+
-+static ssize_t tsc2301_kp_disable_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ struct tsc2301 *tsc = dev_get_drvdata(dev);
-+
-+ return sprintf(buf, "%u\n", tsc2301_kp_disabled(tsc) ? 1 : 0);
-+}
-+
-+static ssize_t tsc2301_kp_disable_store(struct device *dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ struct tsc2301 *tsc = dev_get_drvdata(dev);
-+ struct tsc2301_kp *kp = tsc->kp;
-+ char *endp;
-+ int i;
-+
-+ i = simple_strtoul(buf, &endp, 10);
-+ i = i ? 1 : 0;
-+
-+ mutex_lock(&kp->mutex);
-+ if (i == kp->user_disabled) {
-+ mutex_unlock(&kp->mutex);
-+ return count;
-+ }
-+ kp->user_disabled = i;
-+
-+ if (i)
-+ tsc2301_kp_disable(tsc, 1);
-+ else
-+ tsc2301_kp_enable(tsc);
-+ mutex_unlock(&kp->mutex);
-+
-+ return count;
-+}
-+
-+static DEVICE_ATTR(disable_kp, 0664, tsc2301_kp_disable_show,
-+ tsc2301_kp_disable_store);
-+
-+static const u16 tsc2301_kp_read_data = 0x8000 | TSC2301_REG_KPDATA;
-+
-+static void tsc2301_kp_setup_spi_xfer(struct tsc2301 *tsc)
-+{
-+ struct tsc2301_kp *kp = tsc->kp;
-+ struct spi_message *m = &kp->read_msg;
-+ struct spi_transfer *x = &kp->read_xfer[0];
-+
-+ spi_message_init(&kp->read_msg);
-+
-+ x->tx_buf = &tsc2301_kp_read_data;
-+ x->len = 2;
-+ spi_message_add_tail(x, m);
-+ x++;
-+
-+ x->rx_buf = &kp->data;
-+ x->len = 2;
-+ spi_message_add_tail(x, m);
-+
-+ m->complete = tsc2301_kp_rx;
-+ m->context = tsc;
-+}
-+
-+#ifdef CONFIG_PM
-+int tsc2301_kp_suspend(struct tsc2301 *tsc)
-+{
-+ struct tsc2301_kp *kp = tsc->kp;
-+
-+ mutex_lock(&kp->mutex);
-+ tsc2301_kp_disable(tsc, 1);
-+ mutex_unlock(&kp->mutex);
-+ return 0;
-+}
-+
-+void tsc2301_kp_resume(struct tsc2301 *tsc)
-+{
-+ struct tsc2301_kp *kp = tsc->kp;
-+
-+ mutex_lock(&kp->mutex);
-+ tsc2301_kp_enable(tsc);
-+ mutex_unlock(&kp->mutex);
-+}
-+#endif
-+
-+int __devinit tsc2301_kp_init(struct tsc2301 *tsc,
-+ struct tsc2301_platform_data *pdata)
-+{
-+ struct input_dev *idev;
-+ struct tsc2301_kp *kp;
-+ int r, i;
-+ u16 mask;
-+
-+ if (pdata->keyb_int < 0) {
-+ dev_err(&tsc->spi->dev, "need kbirq");
-+ return -EINVAL;
-+ }
-+
-+ kp = kzalloc(sizeof(*kp), GFP_KERNEL);
-+ if (kp == NULL)
-+ return -ENOMEM;
-+ tsc->kp = kp;
-+
-+ kp->irq = pdata->keyb_int;
-+ spin_lock_init(&kp->lock);
-+ mutex_init(&kp->mutex);
-+
-+ init_timer(&kp->timer);
-+ kp->timer.data = (unsigned long) tsc;
-+ kp->timer.function = tsc2301_kp_timer;
-+
-+ idev = input_allocate_device();
-+ if (idev == NULL) {
-+ r = -ENOMEM;
-+ goto err1;
-+ }
-+ if (pdata->keyb_name)
-+ idev->name = pdata->keyb_name;
-+ else
-+ idev->name = "TSC2301 keypad";
-+ snprintf(kp->phys, sizeof(kp->phys), "%s/input-kp", dev_name(&tsc->spi->dev));
-+ idev->phys = kp->phys;
-+
-+ mask = 0;
-+ idev->evbit[0] = BIT(EV_KEY);
-+ for (i = 0; i < 16; i++) {
-+ if (pdata->keymap[i] > 0) {
-+ set_bit(pdata->keymap[i], idev->keybit);
-+ kp->keymap[i] = pdata->keymap[i];
-+ } else {
-+ kp->keymap[i] = -1;
-+ mask |= 1 << i;
-+ }
-+ }
-+
-+ if (pdata->kp_rep)
-+ set_bit(EV_REP, idev->evbit);
-+
-+ kp->idev = idev;
-+
-+ tsc2301_kp_setup_spi_xfer(tsc);
-+
-+ r = device_create_file(&tsc->spi->dev, &dev_attr_disable_kp);
-+ if (r < 0)
-+ goto err2;
-+
-+ tsc2301_kp_start_scan(tsc);
-+
-+ /* IRQ mode 0 is faulty, it can cause the KBIRQ to get stuck.
-+ * Mode 2 deasserts the IRQ at:
-+ * - HW or SW reset
-+ * - Setting SCS flag in REG_KEY register
-+ * - Releasing all keys
-+ * - Reading the REG_KPDATA
-+ */
-+ tsc2301_write_kbc(tsc, 2);
-+
-+ tsc2301_write_reg(tsc, TSC2301_REG_KPMASK, mask);
-+ kp->mask = mask;
-+
-+ irq_set_irq_type(kp->irq, IRQ_TYPE_EDGE_FALLING);
-+
-+ r = request_irq(kp->irq, tsc2301_kp_irq_handler, 0,
-+ "tsc2301-kp", tsc);
-+ if (r < 0) {
-+ dev_err(&tsc->spi->dev, "unable to get kbirq IRQ");
-+ goto err3;
-+ }
-+ irq_set_irq_wake(kp->irq, 1);
-+
-+ /* We need to read the register once..? */
-+ tsc2301_read_reg(tsc, TSC2301_REG_KPDATA);
-+
-+ r = input_register_device(idev);
-+ if (r < 0) {
-+ dev_err(&tsc->spi->dev, "can't register keypad device\n");
-+ goto err4;
-+ }
-+
-+ return 0;
-+
-+err4:
-+ free_irq(kp->irq, tsc);
-+err3:
-+ tsc2301_kp_stop_scan(tsc);
-+ device_remove_file(&tsc->spi->dev, &dev_attr_disable_kp);
-+err2:
-+ input_free_device(kp->idev);
-+err1:
-+ kfree(kp);
-+ return r;
-+}
-+
-+void __devexit tsc2301_kp_exit(struct tsc2301 *tsc)
-+{
-+ struct tsc2301_kp *kp = tsc->kp;
-+
-+ tsc2301_kp_disable(tsc, 1);
-+ input_unregister_device(kp->idev);
-+ free_irq(kp->irq, tsc);
-+ device_remove_file(&tsc->spi->dev, &dev_attr_disable_kp);
-+
-+ kfree(kp);
-+}
---- a/drivers/input/touchscreen/Kconfig
-+++ b/drivers/input/touchscreen/Kconfig
-@@ -726,6 +726,12 @@ config TOUCHSCREEN_TSC2007
- To compile this driver as a module, choose M here: the
- module will be called tsc2007.
-
-+config TOUCHSCREEN_TSC2301
-+ tristate "TSC2301 touchscreen support"
-+ depends on SPI_TSC2301
-+ help
-+ Say Y here for if you are using the touchscreen features of TSC2301.
-+
- config TOUCHSCREEN_W90X900
- tristate "W90P910 touchscreen driver"
- depends on HAVE_CLK
---- a/drivers/input/touchscreen/Makefile
-+++ b/drivers/input/touchscreen/Makefile
-@@ -52,6 +52,7 @@ obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN) += to
- obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO) += tsc40.o
- obj-$(CONFIG_TOUCHSCREEN_TSC2005) += tsc2005.o
- obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o
-+obj-$(CONFIG_TOUCHSCREEN_TSC2301) += tsc2301_ts.o
- obj-$(CONFIG_TOUCHSCREEN_UCB1400) += ucb1400_ts.o
- obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001) += wacom_w8001.o
- obj-$(CONFIG_TOUCHSCREEN_WM831X) += wm831x-ts.o
---- /dev/null
-+++ b/drivers/input/touchscreen/tsc2301_ts.c
-@@ -0,0 +1,676 @@
-+/*
-+ * TSC2301 touchscreen driver
-+ *
-+ * Copyright (C) 2005-2008 Nokia Corporation
-+ *
-+ * Written by Jarkko Oikarinen, Imre Deak and Juha Yrjola
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/input.h>
-+#include <linux/interrupt.h>
-+#include <linux/delay.h>
-+#include <linux/spi/spi.h>
-+
-+#include <linux/spi/tsc2301.h>
-+
-+/**
-+ * The touchscreen interface operates as follows:
-+ *
-+ * Initialize:
-+ * Request access to GPIO103 (DAV)
-+ * tsc2301_ts_irq_handler will trigger when DAV line goes down
-+ *
-+ * 1) Pen is pressed against touchscreeen
-+ * 2) TSC2301 performs AD conversion
-+ * 3) After the conversion is done TSC2301 drives DAV line down
-+ * 4) GPIO IRQ is received and tsc2301_ts_irq_handler is called
-+ * 5) tsc2301_ts_irq_handler queues up an spi transfer to fetch
-+ * the x, y, z1, z2 values
-+ * 6) SPI framework calls tsc2301_ts_rx after the coordinates are read
-+ * 7) When the penup_timer expires, there have not been DAV interrupts
-+ * during the last 20ms which means the pen has been lifted.
-+ */
-+
-+
-+#define TSC2301_TOUCHSCREEN_PRODUCT_ID 0x0052
-+#define TSC2301_TOUCHSCREEN_PRODUCT_VERSION 0x0001
-+
-+#define TSC2301_TS_PENUP_TIME 20
-+
-+#define TSC2301_ADCREG_CONVERSION_CTRL_BY_TSC2301 0x8000
-+#define TSC2301_ADCREG_CONVERSION_CTRL_BY_HOST 0x0000
-+
-+#define TSC2301_ADCREG_FUNCTION_NONE 0x0000
-+#define TSC2301_ADCREG_FUNCTION_XY 0x0400
-+#define TSC2301_ADCREG_FUNCTION_XYZ 0x0800
-+#define TSC2301_ADCREG_FUNCTION_X 0x0C00
-+#define TSC2301_ADCREG_FUNCTION_Y 0x1000
-+#define TSC2301_ADCREG_FUNCTION_Z 0x1400
-+#define TSC2301_ADCREG_FUNCTION_DAT1 0x1800
-+#define TSC2301_ADCREG_FUNCTION_DAT2 0x1C00
-+#define TSC2301_ADCREG_FUNCTION_AUX1 0x2000
-+#define TSC2301_ADCREG_FUNCTION_AUX2 0x2400
-+#define TSC2301_ADCREG_FUNCTION_TEMP 0x2800
-+
-+#define TSC2301_ADCREG_RESOLUTION_8BIT 0x0100
-+#define TSC2301_ADCREG_RESOLUTION_10BIT 0x0200
-+#define TSC2301_ADCREG_RESOLUTION_12BIT 0x0300
-+
-+#define TSC2301_ADCREG_AVERAGING_NONE 0x0000
-+#define TSC2301_ADCREG_AVERAGING_4AVG 0x0040
-+#define TSC2301_ADCREG_AVERAGING_8AVG 0x0080
-+#define TSC2301_ADCREG_AVERAGING_16AVG 0x00C0
-+
-+#define TSC2301_ADCREG_CLOCK_8MHZ 0x0000
-+#define TSC2301_ADCREG_CLOCK_4MHZ 0x0010
-+#define TSC2301_ADCREG_CLOCK_2MHZ 0x0020
-+#define TSC2301_ADCREG_CLOCK_1MHZ 0x0030
-+
-+#define TSC2301_ADCREG_VOLTAGE_STAB_0US 0x0000
-+#define TSC2301_ADCREG_VOLTAGE_STAB_100US 0x0002
-+#define TSC2301_ADCREG_VOLTAGE_STAB_500US 0x0004
-+#define TSC2301_ADCREG_VOLTAGE_STAB_1MS 0x0006
-+#define TSC2301_ADCREG_VOLTAGE_STAB_5MS 0x0008
-+#define TSC2301_ADCREG_VOLTAGE_STAB_10MS 0x000A
-+#define TSC2301_ADCREG_VOLTAGE_STAB_50MS 0x000C
-+#define TSC2301_ADCREG_VOLTAGE_STAB_100MS 0x000E
-+
-+#define TSC2301_ADCREG_STOP_CONVERSION 0x4000
-+
-+#define MAX_12BIT ((1 << 12) - 1)
-+
-+#define TS_RECT_SIZE 8
-+#define TSF_MIN_Z1 100
-+#define TSF_MAX_Z2 4000
-+
-+#define TSF_SAMPLES 4
-+
-+struct ts_filter {
-+ int sample_cnt;
-+
-+ int avg_x;
-+ int avg_y;
-+ int avg_z1;
-+ int avg_z2;
-+};
-+
-+struct ts_coords {
-+ u16 x;
-+ u16 y;
-+ u16 z1;
-+ u16 z2;
-+};
-+
-+struct tsc2301_ts {
-+ struct input_dev *idev;
-+ char phys[32];
-+ struct timer_list penup_timer;
-+ struct mutex mutex;
-+
-+ struct spi_transfer read_xfer[2];
-+ struct spi_message read_msg;
-+ struct ts_coords *coords;
-+
-+ struct ts_filter filter;
-+
-+ int hw_avg_max;
-+ u16 x;
-+ u16 y;
-+ u16 p;
-+
-+ u16 x_plate_ohm;
-+ int stab_time;
-+ int max_pressure;
-+ int touch_pressure;
-+
-+ u8 event_sent;
-+ u8 pen_down;
-+ u8 disabled;
-+ u8 disable_depth;
-+
-+ int hw_flags;
-+ int irq;
-+};
-+
-+
-+static const u16 tsc2301_ts_read_data = 0x8000 | TSC2301_REG_X;
-+
-+static int tsc2301_ts_check_config(struct tsc2301_ts *ts, int *hw_flags)
-+{
-+ int flags;
-+
-+ flags = 0;
-+ switch (ts->hw_avg_max) {
-+ case 0:
-+ flags |= TSC2301_ADCREG_AVERAGING_NONE;
-+ break;
-+ case 4:
-+ flags |= TSC2301_ADCREG_AVERAGING_4AVG;
-+ break;
-+ case 8:
-+ flags |= TSC2301_ADCREG_AVERAGING_8AVG;
-+ break;
-+ case 16:
-+ flags |= TSC2301_ADCREG_AVERAGING_16AVG;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ switch (ts->stab_time) {
-+ case 0:
-+ flags |= TSC2301_ADCREG_VOLTAGE_STAB_0US;
-+ break;
-+ case 100:
-+ flags |= TSC2301_ADCREG_VOLTAGE_STAB_100US;
-+ break;
-+ case 500:
-+ flags |= TSC2301_ADCREG_VOLTAGE_STAB_500US;
-+ break;
-+ case 1000:
-+ flags |= TSC2301_ADCREG_VOLTAGE_STAB_1MS;
-+ break;
-+ case 5000:
-+ flags |= TSC2301_ADCREG_VOLTAGE_STAB_5MS;
-+ break;
-+ case 10000:
-+ flags |= TSC2301_ADCREG_VOLTAGE_STAB_10MS;
-+ break;
-+ case 50000:
-+ flags |= TSC2301_ADCREG_VOLTAGE_STAB_50MS;
-+ break;
-+ case 100000:
-+ flags |= TSC2301_ADCREG_VOLTAGE_STAB_100MS;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ *hw_flags = flags;
-+ return 0;
-+}
-+
-+/*
-+ * This odd three-time initialization is to work around a bug in TSC2301.
-+ * See TSC2301 errata for details.
-+ */
-+static int tsc2301_ts_configure(struct tsc2301 *tsc, int flags)
-+{
-+ struct spi_transfer xfer[5];
-+ struct spi_transfer *x;
-+ struct spi_message m;
-+ int i;
-+ u16 val1, val2, val3;
-+ u16 data[10];
-+
-+ val1 = TSC2301_ADCREG_CONVERSION_CTRL_BY_HOST |
-+ TSC2301_ADCREG_STOP_CONVERSION |
-+ TSC2301_ADCREG_FUNCTION_NONE |
-+ TSC2301_ADCREG_RESOLUTION_12BIT |
-+ TSC2301_ADCREG_AVERAGING_NONE |
-+ TSC2301_ADCREG_CLOCK_2MHZ |
-+ TSC2301_ADCREG_VOLTAGE_STAB_100MS;
-+
-+ val2 = TSC2301_ADCREG_CONVERSION_CTRL_BY_HOST |
-+ TSC2301_ADCREG_FUNCTION_XYZ |
-+ TSC2301_ADCREG_RESOLUTION_12BIT |
-+ TSC2301_ADCREG_AVERAGING_16AVG |
-+ TSC2301_ADCREG_CLOCK_1MHZ |
-+ TSC2301_ADCREG_VOLTAGE_STAB_100MS;
-+
-+ /* Averaging and voltage stabilization settings in flags */
-+ val3 = TSC2301_ADCREG_CONVERSION_CTRL_BY_TSC2301 |
-+ TSC2301_ADCREG_FUNCTION_XYZ |
-+ TSC2301_ADCREG_RESOLUTION_12BIT |
-+ TSC2301_ADCREG_CLOCK_2MHZ |
-+ flags;
-+
-+ /* Now we prepare the command for transferring */
-+ data[0] = TSC2301_REG_ADC;
-+ data[1] = val1;
-+ data[2] = TSC2301_REG_ADC;
-+ data[3] = val2;
-+ data[4] = TSC2301_REG_ADC;
-+ data[5] = val3;
-+ data[6] = TSC2301_REG_REF;
-+ data[7] = 1 << 4 | 1 << 2 | 1; /* intref, 100uS settl, 2.5V ref */
-+ data[8] = TSC2301_REG_CONFIG;
-+ data[9] = 3 << 3 | 2 << 0; /* 340uS pre-chrg, 544us delay */
-+
-+ spi_message_init(&m);
-+ m.spi = tsc->spi;
-+
-+ memset(xfer, 0, sizeof(xfer));
-+ x = &xfer[0];
-+
-+ for (i = 0; i < 10; i += 2) {
-+ x->tx_buf = &data[i];
-+ x->len = 4;
-+ if (i != 8)
-+ x->cs_change = 1;
-+ spi_message_add_tail(x, &m);
-+ x++;
-+ }
-+ spi_sync(m.spi, &m);
-+
-+ return 0;
-+}
-+
-+static void tsc2301_ts_start_scan(struct tsc2301 *tsc)
-+{
-+ tsc2301_ts_configure(tsc, tsc->ts->hw_flags);
-+ tsc2301_kp_restart(tsc);
-+}
-+
-+static void tsc2301_ts_stop_scan(struct tsc2301 *tsc)
-+{
-+ tsc2301_write_reg(tsc, TSC2301_REG_ADC, TSC2301_ADCREG_STOP_CONVERSION);
-+ tsc2301_kp_restart(tsc);
-+}
-+
-+static void update_pen_state(struct tsc2301_ts *ts, int x, int y, int pressure)
-+{
-+ if (pressure) {
-+ input_report_abs(ts->idev, ABS_X, x);
-+ input_report_abs(ts->idev, ABS_Y, y);
-+ input_report_abs(ts->idev, ABS_PRESSURE, pressure);
-+ if (!ts->pen_down)
-+ input_report_key(ts->idev, BTN_TOUCH, 1);
-+ ts->pen_down = 1;
-+ } else {
-+ input_report_abs(ts->idev, ABS_PRESSURE, 0);
-+ if (ts->pen_down)
-+ input_report_key(ts->idev, BTN_TOUCH, 0);
-+ ts->pen_down = 0;
-+ }
-+
-+ input_sync(ts->idev);
-+
-+#ifdef VERBOSE
-+ dev_dbg(&tsc->spi->dev, "x %4d y %4d p %4d\n", x, y, pressure);
-+#endif
-+}
-+
-+static int filter(struct tsc2301_ts *ts, int x, int y, int z1, int z2)
-+{
-+ int inside_rect, pressure_limit, Rt;
-+ struct ts_filter *tsf = &ts->filter;
-+
-+ /* validate pressure and position */
-+ if (x > MAX_12BIT || y > MAX_12BIT)
-+ return 0;
-+
-+ /* skip coords if the pressure-components are out of range */
-+ if (z1 < TSF_MIN_Z1 || z2 > TSF_MAX_Z2)
-+ return 0;
-+
-+ /* Use the x,y,z1,z2 directly on the first "pen down" event */
-+ if (ts->event_sent) {
-+ tsf->avg_x += x;
-+ tsf->avg_y += y;
-+ tsf->avg_z1 += z1;
-+ tsf->avg_z2 += z2;
-+
-+ if (++tsf->sample_cnt < TSF_SAMPLES)
-+ return 0;
-+ x = tsf->avg_x / TSF_SAMPLES;
-+ y = tsf->avg_y / TSF_SAMPLES;
-+ z1 = tsf->avg_z1 / TSF_SAMPLES;
-+ z2 = tsf->avg_z2 / TSF_SAMPLES;
-+ }
-+ tsf->sample_cnt = 0;
-+ tsf->avg_x = 0;
-+ tsf->avg_y = 0;
-+ tsf->avg_z1 = 0;
-+ tsf->avg_z2 = 0;
-+
-+ pressure_limit = ts->event_sent? ts->max_pressure: ts->touch_pressure;
-+
-+ /* z1 is always at least 100: */
-+ Rt = x * (z2 - z1) / z1;
-+ Rt = Rt * ts->x_plate_ohm / 4096;
-+ if (Rt > pressure_limit)
-+ return 0;
-+
-+ /* discard the event if it still is within the previous rect - unless
-+ * if the pressure is harder, but then use previous x,y position */
-+ inside_rect = (
-+ x > (int)ts->x - TS_RECT_SIZE && x < (int)ts->x + TS_RECT_SIZE &&
-+ y > (int)ts->y - TS_RECT_SIZE && y < (int)ts->y + TS_RECT_SIZE);
-+
-+ if (!ts->event_sent || !inside_rect) {
-+ ts->x = x;
-+ ts->y = y;
-+ ts->p = Rt;
-+ return 1;
-+ } else if (Rt < ts->p) {
-+ ts->p = Rt;
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * This procedure is called by the SPI framework after the coordinates
-+ * have been read from TSC2301
-+ */
-+static void tsc2301_ts_rx(void *arg)
-+{
-+ struct tsc2301 *tsc = arg;
-+ struct tsc2301_ts *ts = tsc->ts;
-+ int send_event;
-+ int x, y, z1, z2;
-+
-+ x = ts->coords->x;
-+ y = ts->coords->y;
-+ z1 = ts->coords->z1;
-+ z2 = ts->coords->z2;
-+
-+ send_event = filter(ts, x, y, z1, z2);
-+ if (send_event) {
-+ update_pen_state(ts, ts->x, ts->y, ts->p);
-+ ts->event_sent = 1;
-+ }
-+
-+ mod_timer(&ts->penup_timer,
-+ jiffies + msecs_to_jiffies(TSC2301_TS_PENUP_TIME));
-+}
-+
-+/*
-+ * Timer is called TSC2301_TS_PENUP_TIME after pen is up
-+ */
-+static void tsc2301_ts_timer_handler(unsigned long data)
-+{
-+ struct tsc2301 *tsc = (struct tsc2301 *)data;
-+ struct tsc2301_ts *ts = tsc->ts;
-+
-+ if (ts->event_sent) {
-+ ts->event_sent = 0;
-+ update_pen_state(ts, 0, 0, 0);
-+ }
-+}
-+
-+/*
-+ * This interrupt is called when pen is down and coordinates are
-+ * available. That is indicated by a falling edge on DEV line.
-+ */
-+static irqreturn_t tsc2301_ts_irq_handler(int irq, void *dev_id)
-+{
-+ struct tsc2301 *tsc = dev_id;
-+ struct tsc2301_ts *ts = tsc->ts;
-+ int r;
-+
-+ r = spi_async(tsc->spi, &ts->read_msg);
-+ if (r)
-+ dev_err(&tsc->spi->dev, "ts: spi_async() failed");
-+
-+ mod_timer(&ts->penup_timer,
-+ jiffies + msecs_to_jiffies(TSC2301_TS_PENUP_TIME));
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void tsc2301_ts_disable(struct tsc2301 *tsc)
-+{
-+ struct tsc2301_ts *ts = tsc->ts;
-+
-+ if (ts->disable_depth++ != 0)
-+ return;
-+
-+ disable_irq(ts->irq);
-+
-+ /* wait until penup timer expire normally */
-+ do {
-+ msleep(1);
-+ } while (ts->event_sent);
-+
-+ tsc2301_ts_stop_scan(tsc);
-+}
-+
-+static void tsc2301_ts_enable(struct tsc2301 *tsc)
-+{
-+ struct tsc2301_ts *ts = tsc->ts;
-+
-+ if (--ts->disable_depth != 0)
-+ return;
-+
-+ enable_irq(ts->irq);
-+
-+ tsc2301_ts_start_scan(tsc);
-+}
-+
-+#ifdef CONFIG_PM
-+int tsc2301_ts_suspend(struct tsc2301 *tsc)
-+{
-+ struct tsc2301_ts *ts = tsc->ts;
-+
-+ mutex_lock(&ts->mutex);
-+ tsc2301_ts_disable(tsc);
-+ mutex_unlock(&ts->mutex);
-+
-+ return 0;
-+}
-+
-+void tsc2301_ts_resume(struct tsc2301 *tsc)
-+{
-+ struct tsc2301_ts *ts = tsc->ts;
-+
-+ mutex_lock(&ts->mutex);
-+ tsc2301_ts_enable(tsc);
-+ mutex_unlock(&ts->mutex);
-+}
-+#endif
-+
-+static void tsc2301_ts_setup_spi_xfer(struct tsc2301 *tsc)
-+{
-+ struct tsc2301_ts *ts = tsc->ts;
-+ struct spi_message *m = &ts->read_msg;
-+ struct spi_transfer *x = &ts->read_xfer[0];
-+
-+ spi_message_init(m);
-+
-+ x->tx_buf = &tsc2301_ts_read_data;
-+ x->len = 2;
-+ spi_message_add_tail(x, m);
-+
-+ x++;
-+ x->rx_buf = ts->coords;
-+ x->len = 8;
-+ spi_message_add_tail(x, m);
-+
-+ m->complete = tsc2301_ts_rx;
-+ m->context = tsc;
-+}
-+
-+static ssize_t tsc2301_ts_pen_down_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct tsc2301 *tsc = dev_get_drvdata(dev);
-+
-+ return sprintf(buf, "%u\n", tsc->ts->pen_down);
-+}
-+
-+static DEVICE_ATTR(pen_down, S_IRUGO, tsc2301_ts_pen_down_show, NULL);
-+
-+static ssize_t tsc2301_ts_disable_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ struct tsc2301 *tsc = dev_get_drvdata(dev);
-+ struct tsc2301_ts *ts = tsc->ts;
-+
-+ return sprintf(buf, "%u\n", ts->disabled);
-+}
-+
-+static ssize_t tsc2301_ts_disable_store(struct device *dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ struct tsc2301 *tsc = dev_get_drvdata(dev);
-+ struct tsc2301_ts *ts = tsc->ts;
-+ char *endp;
-+ int i;
-+
-+ i = simple_strtoul(buf, &endp, 10);
-+ i = i ? 1 : 0;
-+ mutex_lock(&ts->mutex);
-+ if (i == ts->disabled) goto out;
-+ ts->disabled = i;
-+
-+ if (i)
-+ tsc2301_ts_disable(tsc);
-+ else
-+ tsc2301_ts_enable(tsc);
-+out:
-+ mutex_unlock(&ts->mutex);
-+ return count;
-+}
-+
-+static DEVICE_ATTR(disable_ts, 0664, tsc2301_ts_disable_show,
-+ tsc2301_ts_disable_store);
-+
-+int __devinit tsc2301_ts_init(struct tsc2301 *tsc,
-+ struct tsc2301_platform_data *pdata)
-+{
-+ struct tsc2301_ts *ts;
-+ struct input_dev *idev;
-+ int r;
-+ int x_max, y_max;
-+ int x_fudge, y_fudge, p_fudge;
-+
-+ if (pdata->dav_int <= 0) {
-+ dev_err(&tsc->spi->dev, "need DAV IRQ");
-+ return -EINVAL;
-+ }
-+
-+ ts = kzalloc(sizeof(*ts), GFP_KERNEL);
-+ if (ts == NULL)
-+ return -ENOMEM;
-+ tsc->ts = ts;
-+
-+ ts->coords = kzalloc(sizeof(*ts->coords), GFP_KERNEL);
-+ if (ts->coords == NULL) {
-+ kfree(ts);
-+ return -ENOMEM;
-+ }
-+
-+ ts->irq = pdata->dav_int;
-+
-+ init_timer(&ts->penup_timer);
-+ setup_timer(&ts->penup_timer, tsc2301_ts_timer_handler,
-+ (unsigned long)tsc);
-+
-+ mutex_init(&ts->mutex);
-+
-+ ts->x_plate_ohm = pdata->ts_x_plate_ohm ? : 280;
-+ ts->hw_avg_max = pdata->ts_hw_avg;
-+ ts->max_pressure = pdata->ts_max_pressure ? : MAX_12BIT;
-+ ts->touch_pressure = pdata->ts_touch_pressure ? : ts->max_pressure;
-+ ts->stab_time = pdata->ts_stab_time;
-+
-+ x_max = pdata->ts_x_max ? : 4096;
-+ y_max = pdata->ts_y_max ? : 4096;
-+ x_fudge = pdata->ts_x_fudge ? : 4;
-+ y_fudge = pdata->ts_y_fudge ? : 8;
-+ p_fudge = pdata->ts_pressure_fudge ? : 2;
-+
-+ if ((r = tsc2301_ts_check_config(ts, &ts->hw_flags))) {
-+ dev_err(&tsc->spi->dev, "invalid configuration\n");
-+ goto err2;
-+ }
-+
-+ idev = input_allocate_device();
-+ if (idev == NULL) {
-+ r = -ENOMEM;
-+ goto err2;
-+ }
-+ idev->name = "TSC2301 touchscreen";
-+ snprintf(ts->phys, sizeof(ts->phys),
-+ "%s/input-ts", dev_name(&tsc->spi->dev));
-+ idev->phys = ts->phys;
-+ idev->dev.parent = &tsc->spi->dev;
-+
-+ idev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
-+ idev->absbit[0] = BIT(ABS_X) | BIT(ABS_Y) | BIT(ABS_PRESSURE);
-+ ts->idev = idev;
-+
-+ tsc2301_ts_setup_spi_xfer(tsc);
-+
-+ /* These parameters should perhaps be configurable? */
-+ input_set_abs_params(idev, ABS_X, 0, x_max, x_fudge, 0);
-+ input_set_abs_params(idev, ABS_Y, 0, y_max, y_fudge, 0);
-+ input_set_abs_params(idev, ABS_PRESSURE, 0, ts->max_pressure,
-+ p_fudge, 0);
-+
-+ tsc2301_ts_start_scan(tsc);
-+
-+ r = request_irq(ts->irq, tsc2301_ts_irq_handler,
-+ IRQF_TRIGGER_FALLING,
-+ "tsc2301-ts", tsc);
-+ if (r < 0) {
-+ dev_err(&tsc->spi->dev, "unable to get DAV IRQ");
-+ goto err3;
-+ }
-+ irq_set_irq_wake(ts->irq, 1);
-+
-+ if (device_create_file(&tsc->spi->dev, &dev_attr_pen_down) < 0)
-+ goto err4;
-+ if (device_create_file(&tsc->spi->dev, &dev_attr_disable_ts) < 0)
-+ goto err5;
-+
-+ r = input_register_device(idev);
-+ if (r < 0) {
-+ dev_err(&tsc->spi->dev, "can't register touchscreen device\n");
-+ goto err6;
-+ }
-+
-+ return 0;
-+err6:
-+ device_remove_file(&tsc->spi->dev, &dev_attr_disable_ts);
-+err5:
-+ device_remove_file(&tsc->spi->dev, &dev_attr_pen_down);
-+err4:
-+ free_irq(ts->irq, tsc);
-+err3:
-+ tsc2301_ts_stop_scan(tsc);
-+ input_free_device(idev);
-+err2:
-+ kfree(ts->coords);
-+ kfree(ts);
-+ return r;
-+}
-+
-+void __devexit tsc2301_ts_exit(struct tsc2301 *tsc)
-+{
-+ struct tsc2301_ts *ts = tsc->ts;
-+
-+ tsc2301_ts_disable(tsc);
-+
-+ device_remove_file(&tsc->spi->dev, &dev_attr_disable_ts);
-+ device_remove_file(&tsc->spi->dev, &dev_attr_pen_down);
-+
-+ free_irq(ts->irq, tsc);
-+ input_unregister_device(ts->idev);
-+
-+ kfree(ts->coords);
-+ kfree(ts);
-+}
-+MODULE_AUTHOR("Jarkko Oikarinen <jarkko.oikarinen@nokia.com>");
-+MODULE_LICENSE("GPL");
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -433,6 +433,28 @@ config SPI_TLE62X0
- sysfs interface, with each line presented as a kind of GPIO
- exposing both switch control and diagnostic feedback.
-
-+config SPI_TSC2301
-+ tristate "TSC2301 driver"
-+ depends on SPI_MASTER
-+ help
-+ Say Y here if you have a TSC2301 chip connected to an SPI
-+ bus on your board.
-+
-+ The TSC2301 is a highly integrated PDA analog interface circuit.
-+ It contains a complete 12-bit A/D resistive touch screen
-+ converter (ADC) including drivers, touch pressure measurement
-+ capability, keypad controller, and 8-bit D/A converter (DAC) output
-+ for LCD contrast control.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called tsc2301.
-+
-+config SPI_TSC2301_AUDIO
-+ boolean "TSC2301 audio support"
-+ depends on SPI_TSC2301 && SND
-+ help
-+ Say Y here for if you are using the audio features of TSC2301.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -59,4 +59,6 @@ obj-$(CONFIG_SPI_TLE62X0) += spi-tle62x
- obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
- obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
- obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
--
-+obj-$(CONFIG_SPI_TSC2301) += tsc2301.o
-+tsc2301-objs := tsc2301-core.o
-+tsc2301-$(CONFIG_SPI_TSC2301_AUDIO) += tsc2301-mixer.o
---- /dev/null
-+++ b/drivers/spi/tsc2301-core.c
-@@ -0,0 +1,297 @@
-+/*
-+ * TSC2301 driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/delay.h>
-+#include <linux/gpio.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/tsc2301.h>
-+
-+u16 tsc2301_read_reg(struct tsc2301 *tsc, int reg)
-+{
-+ struct spi_transfer t[2];
-+ struct spi_message m;
-+ u16 data = 0, cmd;
-+
-+ cmd = reg;
-+ cmd |= 0x8000;
-+
-+ memset(t, 0, sizeof(t));
-+ spi_message_init(&m);
-+ m.spi = tsc->spi;
-+
-+ t[0].tx_buf = &cmd;
-+ t[0].rx_buf = NULL;
-+ t[0].len = 2;
-+ spi_message_add_tail(&t[0], &m);
-+
-+ t[1].tx_buf = NULL;
-+ t[1].rx_buf = &data;
-+ t[1].len = 2;
-+ spi_message_add_tail(&t[1], &m);
-+
-+ spi_sync(m.spi, &m);
-+
-+ return data;
-+}
-+
-+void tsc2301_write_reg(struct tsc2301 *tsc, int reg, u16 val)
-+{
-+ struct spi_transfer t;
-+ struct spi_message m;
-+ u16 data[2];
-+
-+ /* Now we prepare the command for transferring */
-+ data[0] = reg;
-+ data[1] = val;
-+
-+ spi_message_init(&m);
-+ m.spi = tsc->spi;
-+
-+ memset(&t, 0, sizeof(t));
-+ t.tx_buf = data;
-+ t.rx_buf = NULL;
-+ t.len = 4;
-+ spi_message_add_tail(&t, &m);
-+
-+ spi_sync(m.spi, &m);
-+}
-+
-+void tsc2301_write_kbc(struct tsc2301 *tsc, int val)
-+{
-+ u16 w;
-+
-+ w = tsc->config2_shadow;
-+ w &= ~(0x03 << 14);
-+ w |= (val & 0x03) << 14;
-+ tsc2301_write_reg(tsc, TSC2301_REG_CONFIG2, w);
-+ tsc->config2_shadow = w;
-+}
-+
-+void tsc2301_write_pll(struct tsc2301 *tsc,
-+ int pll_n, int pll_a, int pll_pdc, int pct_e, int pll_o)
-+{
-+ u16 w;
-+
-+ w = tsc->config2_shadow;
-+ w &= ~0x3fff;
-+ w |= (pll_n & 0x0f) | ((pll_a & 0x0f) << 4) | ((pll_pdc & 0x0f) << 8);
-+ w |= pct_e ? (1 << 12) : 0;
-+ w |= pll_o ? (1 << 13) : 0;
-+ tsc2301_write_reg(tsc, TSC2301_REG_CONFIG2, w);
-+ tsc->config2_shadow = w;
-+}
-+
-+void tsc2301_read_buf(struct tsc2301 *tsc, int reg, u16 *rx_buf, int len)
-+{
-+ struct spi_transfer t[2];
-+ struct spi_message m;
-+ u16 cmd, i;
-+
-+ cmd = reg;
-+ cmd |= 0x8000;
-+
-+ spi_message_init(&m);
-+ m.spi = tsc->spi;
-+
-+ memset(t, 0, sizeof(t));
-+ t[0].tx_buf = &cmd;
-+ t[0].rx_buf = NULL;
-+ t[0].len = 2;
-+ spi_message_add_tail(&t[0], &m);
-+
-+ t[1].tx_buf = NULL;
-+ t[1].rx_buf = rx_buf;
-+ t[1].len = 2 * len;
-+ spi_message_add_tail(&t[1], &m);
-+
-+ spi_sync(m.spi, &m);
-+
-+ for (i = 0; i < len; i++)
-+ printk(KERN_DEBUG "rx_buf[%d]: %04x\n", i, rx_buf[i]);
-+}
-+
-+static int __devinit tsc2301_probe(struct spi_device *spi)
-+{
-+ struct tsc2301 *tsc;
-+ struct tsc2301_platform_data *pdata = spi->dev.platform_data;
-+ int r;
-+ u16 w;
-+
-+ if (!pdata) {
-+ dev_dbg(&spi->dev, "no platform data?\n");
-+ return -ENODEV;
-+ }
-+
-+ tsc = kzalloc(sizeof(*tsc), GFP_KERNEL);
-+ if (tsc == NULL)
-+ return -ENOMEM;
-+
-+ dev_set_drvdata(&spi->dev, tsc);
-+ tsc->spi = spi;
-+
-+ tsc->enable_clock = pdata->enable_clock;
-+ tsc->disable_clock = pdata->disable_clock;
-+
-+ if (pdata->reset_gpio >= 0) {
-+ tsc->reset_gpio = pdata->reset_gpio;
-+ r = gpio_request(tsc->reset_gpio, "TSC2301 reset");
-+ if (r < 0)
-+ goto err1;
-+ gpio_direction_output(tsc->reset_gpio, 1);
-+ mdelay(1);
-+ gpio_set_value(tsc->reset_gpio, 0);
-+ } else
-+ tsc->reset_gpio = -1;
-+
-+ spi->mode = SPI_MODE_1;
-+ spi->bits_per_word = 16;
-+ /* The max speed might've been defined by the board-specific
-+ * struct */
-+ if (!spi->max_speed_hz)
-+ spi->max_speed_hz = TSC2301_HZ;
-+ spi_setup(spi);
-+
-+ /* Soft reset */
-+ tsc2301_write_reg(tsc, TSC2301_REG_RESET, 0xbb00);
-+ msleep(1);
-+
-+ w = tsc2301_read_reg(tsc, TSC2301_REG_ADC);
-+ if (!(w & (1 << 14))) {
-+ dev_err(&spi->dev, "invalid ADC reg value: %04x\n", w);
-+ r = -ENODEV;
-+ goto err1;
-+ }
-+
-+ w = tsc2301_read_reg(tsc, TSC2301_REG_DAC);
-+ if (!(w & (1 << 15))) {
-+ dev_err(&spi->dev, "invalid DAC reg value: %04x\n", w);
-+ r = -ENODEV;
-+ goto err1;
-+ }
-+
-+ /* Stop keypad scanning */
-+ tsc2301_write_reg(tsc, TSC2301_REG_KEY, 0x4000);
-+
-+ /* We have to cache this for read-modify-write, since we can't
-+ * read back BIT15 */
-+ w = tsc2301_read_reg(tsc, TSC2301_REG_CONFIG2);
-+ /* By default BIT15 is set */
-+ w |= 1 << 15;
-+ tsc->config2_shadow = w;
-+
-+ r = tsc2301_kp_init(tsc, pdata);
-+ if (r)
-+ goto err1;
-+ r = tsc2301_ts_init(tsc, pdata);
-+ if (r)
-+ goto err2;
-+ r = tsc2301_mixer_init(tsc, pdata);
-+ if (r)
-+ goto err3;
-+ return 0;
-+
-+err3:
-+ tsc2301_ts_exit(tsc);
-+err2:
-+ tsc2301_kp_exit(tsc);
-+err1:
-+ kfree(tsc);
-+ return r;
-+}
-+
-+static int __devexit tsc2301_remove(struct spi_device *spi)
-+{
-+ struct tsc2301 *tsc = dev_get_drvdata(&spi->dev);
-+
-+ tsc2301_mixer_exit(tsc);
-+ tsc2301_ts_exit(tsc);
-+ tsc2301_kp_exit(tsc);
-+ if (tsc->reset_gpio >= 0)
-+ gpio_free(tsc->reset_gpio);
-+ kfree(tsc);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int tsc2301_suspend(struct spi_device *spi, pm_message_t mesg)
-+{
-+ struct tsc2301 *tsc = dev_get_drvdata(&spi->dev);
-+ int r;
-+
-+ if ((r = tsc2301_mixer_suspend(tsc)) < 0)
-+ return r;
-+ if ((r = tsc2301_kp_suspend(tsc)) < 0)
-+ goto err1;
-+ if ((r = tsc2301_ts_suspend(tsc)) < 0)
-+ goto err2;
-+
-+ return 0;
-+err2:
-+ tsc2301_kp_resume(tsc);
-+err1:
-+ tsc2301_mixer_resume(tsc);
-+ return r;
-+}
-+
-+static int tsc2301_resume(struct spi_device *spi)
-+{
-+ struct tsc2301 *tsc = dev_get_drvdata(&spi->dev);
-+
-+ tsc2301_ts_resume(tsc);
-+ tsc2301_kp_resume(tsc);
-+ tsc2301_mixer_resume(tsc);
-+ return 0;
-+}
-+#endif
-+
-+static struct spi_driver tsc2301_driver = {
-+ .driver = {
-+ .name = "tsc2301",
-+ .bus = &spi_bus_type,
-+ .owner = THIS_MODULE,
-+ },
-+#ifdef CONFIG_PM
-+ .suspend = tsc2301_suspend,
-+ .resume = tsc2301_resume,
-+#endif
-+ .probe = tsc2301_probe,
-+ .remove = __devexit_p(tsc2301_remove),
-+};
-+
-+static int __init tsc2301_init(void)
-+{
-+ printk("TSC2301 driver initializing\n");
-+
-+ return spi_register_driver(&tsc2301_driver);
-+}
-+module_init(tsc2301_init);
-+
-+static void __exit tsc2301_exit(void)
-+{
-+ spi_unregister_driver(&tsc2301_driver);
-+}
-+module_exit(tsc2301_exit);
-+
-+MODULE_AUTHOR("Juha Yrjölä <juha.yrjola@nokia.com>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/spi/tsc2301-mixer.c
-@@ -0,0 +1,1003 @@
-+/*
-+ * ALSA Mixer implementation for TSC2301
-+ *
-+ * Copyright (C) 2006 Nokia Corporation.
-+ *
-+ * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
-+ * Juha Yrjola
-+ *
-+ * Some notes about TSC2301:
-+ * - PLL will stop when DAC and ADC's are powered down.
-+ * - Touchscreen will stop working when audio part is powered up and if audio
-+ * MCLK is stopped. Problem is avoided if audio is powered down before
-+ * stopping MCLK.
-+ * - Audio DAC or audio outputs will activate only after 100 msec from the
-+ * chip power-up. Reason seems to be VCM since there is no this delay if the
-+ * chip and VCM (bit AVPD on PD/MISC) were not powered down. The chip will
-+ * consume about 1 mA if all other audio blocks are powered down except the
-+ * chip itself and VCM. Full power down consumes only about few uA.
-+ * - Power-down transition could happen earliest about 100 msec after the chip
-+ * power-up. Otherwise power-down will fail if there is no that 100 msec
-+ * on time before it. It's not obvious why is that since chip reports
-+ * power-up to be completed and also PLL output on GPIO_0 is active in few
-+ * milliseconds.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/delay.h>
-+#include <linux/slab.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/tsc2301.h>
-+
-+#include <sound/core.h>
-+#include <sound/control.h>
-+
-+/* shadow register indexes */
-+enum {
-+ /* audio control and volume registers */
-+ AUDCNTL_INDEX,
-+ ADCVOL_INDEX,
-+ DACVOL_INDEX,
-+ BPVOL_INDEX,
-+ /* keyclick control register (not needed here) */
-+ /* audio power control register */
-+ PD_MISC_INDEX,
-+ /* TSC2301 GPIO control register */
-+ GPIO_INDEX,
-+
-+ SHADOW_REG_COUNT,
-+};
-+
-+/* structure for driver private data */
-+struct tsc2301_mixer {
-+ struct tsc2301 *tsc;
-+ struct mutex mutex;
-+
-+ /* shadow registers holding TSC2301 audio registers. Used to hold
-+ * their states during the sleep and also to reduce communication with
-+ * the chip since get callback functions could get register values
-+ * directly from these shadow registers without needing to read them
-+ * from the chip */
-+ u16 shadow_regs[SHADOW_REG_COUNT];
-+
-+ /* audio controller driver usage of the ADC and DAC */
-+ unsigned adc_enabled:1, dac_enabled:1;
-+ unsigned pll_output:1;
-+ unsigned mclk_enabled;
-+
-+ /* latest audio power-up timestamp */
-+ unsigned long pu_jiffies;
-+
-+ /* these are used when upper layer(s) are going to power-down TSC2301
-+ * before 100 msec is passed from power-up */
-+ struct delayed_work delayed_power_down;
-+ unsigned delayed_pd_active:1;
-+
-+ int (* platform_init)(struct device *);
-+ void (* platform_cleanup)(struct device *);
-+
-+ struct tsc2301_mixer_gpio *mixer_gpios;
-+ int n_mixer_gpios;
-+};
-+
-+#define TSC2301_DAC_DELAY msecs_to_jiffies(100)
-+#define TSC2301_MIN_PU_PERIOD msecs_to_jiffies(100)
-+
-+#define TSC2301_REG_TO_PVAL(reg) \
-+ (TSC2301_REG_TO_PAGE(reg) << 6 | TSC2301_REG_TO_ADDR(reg))
-+#define TSC2301_PVAL_TO_REG(v) \
-+ (TSC2301_REG((((v) >> 6) & 3),((v) & 0x1f)))
-+
-+#define TSC2301_VOLUME_MASK 0x7f
-+#define TSC2301_MIN_ADCVOL 6
-+#define TSC2301_MIN_DACVOL 0
-+#define TSC2301_MIN_BPVOL 31
-+#define TSC2301_MUTE_LEFT_SHIFT 15
-+#define TSC2301_VOL_LEFT_SHIFT 8
-+#define TSC2301_MUTE_RIGHT_SHIFT 7
-+#define TSC2301_VOL_RIGHT_SHIFT 0
-+
-+#define TSC2301_INM_MASK 3
-+#define TSC2301_INML_SHIFT 12
-+#define TSC2301_INMR_SHIFT 10
-+
-+#define TSC2301_MICG_MASK 3
-+#define TSC2301_MICG_MIN 1 /* values 0 & 1 both mean 0 dB */
-+#define TSC2301_MICG_SHIFT 8
-+
-+#define TSC2301_REG_AUDCNTL_MCLK(v) (((v) & 3) << 6)
-+#define TSC2301_REG_AUDCNTL_I2SFS(v) (((v) & 0xf) << 2)
-+#define TSC2301_REG_AUDCNTL_I2SFM(v) (((v) & 3) << 0)
-+
-+#define TSC2301_SINGLE(xname, xindex, reg, shadow_index, shift, mask, min) \
-+{\
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
-+ .name = xname, \
-+ .index = xindex, \
-+ .info = snd_tsc2301_info_single, \
-+ .get = snd_tsc2301_get_single, \
-+ .put = snd_tsc2301_put_single, \
-+ .private_value = TSC2301_REG_TO_PVAL(reg) | \
-+ (shadow_index << 8) | (shift << 16) | (mask << 24) | \
-+ (min << 28) \
-+}
-+#define TSC2301_SINGLE_MINVAL(v) (((v) >> 28) & 15)
-+#define TSC2301_SINGLE_SHIFT(v) (((v) >> 16) & 15)
-+#define TSC2301_SINGLE_MASK(v) (((v) >> 24) & 15)
-+
-+#define TSC2301_DOUBLE(xname, xindex, reg, shadow_index, ls, rs, mask, min) \
-+{\
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
-+ .name = xname, \
-+ .index = xindex, \
-+ .info = snd_tsc2301_info_double, \
-+ .get = snd_tsc2301_get_double, \
-+ .put = snd_tsc2301_put_double, \
-+ .private_value = TSC2301_REG_TO_PVAL(reg) | \
-+ (shadow_index << 8) | (min << 11) | \
-+ (ls << 16) | (rs << 20) | (mask << 24) \
-+}
-+#define TSC2301_DOUBLE_MINVAL(v) (((v) >> 11) & 0x1f)
-+#define TSC2301_DOUBLE_LEFT_SHIFT(v) (((v) >> 16) & 15)
-+#define TSC2301_DOUBLE_RIGHT_SHIFT(v) (((v) >> 20) & 15)
-+#define TSC2301_DOUBLE_MASK(v) (((v) >> 24) & TSC2301_VOLUME_MASK)
-+
-+#define TSC2301_MUX(xname, xindex, reg, shadow_index, ls, rs, mask) \
-+{\
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
-+ .name = xname, \
-+ .index = xindex, \
-+ .info = snd_tsc2301_info_mux, \
-+ .get = snd_tsc2301_get_mux, \
-+ .put = snd_tsc2301_put_mux, \
-+ .private_value = TSC2301_REG_TO_PVAL(reg) | \
-+ (shadow_index << 8) | (ls << 16) | (rs << 20) | (mask << 24) \
-+}
-+#define TSC2301_MUX_LEFT_SHIFT(v) (((v) >> 16) & 15)
-+#define TSC2301_MUX_RIGHT_SHIFT(v) (((v) >> 20) & 15)
-+#define TSC2301_MUX_MASK(v) (((v) >> 24) & TSC2301_VOLUME_MASK)
-+
-+#define TSC2301_BOOL(xname, xindex, reg, shadow_index, shift, invert, state) \
-+{ \
-+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
-+ .name = xname, \
-+ .index = xindex, \
-+ .info = snd_tsc2301_info_bool, \
-+ .get = snd_tsc2301_get_bool, \
-+ .put = snd_tsc2301_put_bool, \
-+ .private_value = TSC2301_REG_TO_PVAL(reg) | \
-+ (shadow_index << 8) | (shift << 16) | \
-+ (invert << 24) | (state << 25) \
-+}
-+#define TSC2301_BOOL_SHIFT(v) (((v) >> 16) & 7)
-+#define TSC2301_BOOL_INVERT(v) (((v) >> 24) & 1)
-+#define TSC2301_BOOL_STATE(v) (((v) >> 25) & 1)
-+
-+#define TSC2301_SHADOW_INDEX(v) (((v) >> 8) & 7)
-+
-+/*
-+ * Power-down handler for additional GPIO mixer controls. GPIO state of GPIO
-+ * controls whose power-down flag is enabled are set to their false/deactivate
-+ * state
-+ *
-+ * Must be called tsc->mixer->mutex locked
-+ */
-+static void tsc2301_gpio_power_down(struct tsc2301 *tsc)
-+{
-+ struct tsc2301_mixer *mix = tsc->mixer;
-+ u16 temp;
-+ int i;
-+
-+ temp = mix->shadow_regs[GPIO_INDEX];
-+ for (i = 0; i < mix->n_mixer_gpios; i++) {
-+ const struct tsc2301_mixer_gpio *mg;
-+
-+ mg = mix->mixer_gpios + i;
-+ if (mg->deactivate_on_pd) {
-+ int gpio = mg->gpio;
-+
-+ temp &= ~(1 << gpio);
-+ temp |= mg->inverted << gpio;
-+ }
-+ }
-+ tsc2301_write_reg(tsc, TSC2301_REG_GPIO, temp);
-+}
-+
-+/*
-+ * Powers down/up audio blocks which are muted or become unused.
-+ * shadow_index >= 0, changes power state of single audio block
-+ * shadow_index < 0, changes power state of all blocks
-+ *
-+ * Must be called tsc->mixer->mutex locked
-+ */
-+#define TSC2301_MUTE_MASK \
-+ ((1 << TSC2301_MUTE_LEFT_SHIFT) | (1 << TSC2301_MUTE_RIGHT_SHIFT))
-+static void tsc2301_power_ctrl(struct tsc2301 *tsc, int shadow_index,
-+ int poll_pdsts)
-+{
-+ struct tsc2301_mixer *mix = tsc->mixer;
-+ u16 pd_ctrl, pd_ctrl_old, w;
-+ unsigned long timeout;
-+ int power_up = 0;
-+
-+ if (mix->delayed_pd_active) {
-+ mix->delayed_pd_active = 0;
-+ mix->mclk_enabled--;
-+ cancel_delayed_work(&mix->delayed_power_down);
-+ }
-+
-+ pd_ctrl = pd_ctrl_old = mix->shadow_regs[PD_MISC_INDEX];
-+ /* power control helper based on used space mixer selections. See
-+ * actual power control decisions below */
-+ if (shadow_index < 0 || shadow_index == ADCVOL_INDEX) {
-+ /* ADC left and right power down control */
-+ if (mix->shadow_regs[ADCVOL_INDEX] &
-+ (1 << TSC2301_MUTE_LEFT_SHIFT))
-+ /* left ADC muted. Power down the left ADC */
-+ pd_ctrl |= TSC2301_REG_PD_MISC_ADPDL;
-+ else
-+ pd_ctrl &= ~TSC2301_REG_PD_MISC_ADPDL;
-+ if (mix->shadow_regs[ADCVOL_INDEX] &
-+ (1 << TSC2301_MUTE_LEFT_SHIFT))
-+ /* right ADC muted. Power down the right ADC */
-+ pd_ctrl |= TSC2301_REG_PD_MISC_ADPDR;
-+ else
-+ pd_ctrl &= ~TSC2301_REG_PD_MISC_ADPDR;
-+ }
-+ if (shadow_index < 0 || shadow_index == DACVOL_INDEX) {
-+ /* DAC power down control */
-+ if ((mix->shadow_regs[DACVOL_INDEX] &
-+ TSC2301_MUTE_MASK) == TSC2301_MUTE_MASK)
-+ /* both DACs muted. Power down the DAC */
-+ pd_ctrl |= TSC2301_REG_PD_MISC_DAPD;
-+ else
-+ pd_ctrl &= ~TSC2301_REG_PD_MISC_DAPD;
-+ }
-+ if (shadow_index < 0 || shadow_index == BPVOL_INDEX) {
-+ /* line bypass power down control */
-+ if ((mix->shadow_regs[BPVOL_INDEX] &
-+ TSC2301_MUTE_MASK) == TSC2301_MUTE_MASK)
-+ /* both line bypasses muted. Power down the bypass
-+ * path */
-+ pd_ctrl |= TSC2301_REG_PD_MISC_ABPD;
-+ else
-+ pd_ctrl &= ~TSC2301_REG_PD_MISC_ABPD;
-+ }
-+ if (shadow_index < 0 || shadow_index == AUDCNTL_INDEX) {
-+ /* mic bias power down control */
-+ if ((mix->shadow_regs[AUDCNTL_INDEX] &
-+ (3 << TSC2301_INML_SHIFT)) &&
-+ (mix->shadow_regs[AUDCNTL_INDEX] &
-+ (3 << TSC2301_INMR_SHIFT)))
-+ /* both ADC channels use other than mic input. Power
-+ * down the mic bias output */
-+ pd_ctrl |= TSC2301_REG_PD_MISC_MIBPD;
-+ else
-+ pd_ctrl &= ~TSC2301_REG_PD_MISC_MIBPD;
-+ }
-+
-+ /* power control decisions based on codec usage and user space mixer
-+ * selections detected above */
-+ pd_ctrl &= ~TSC2301_REG_PD_MISC_APD; /* audio not powered down */
-+ if (mix->mclk_enabled) {
-+ if (!mix->adc_enabled) {
-+ /* ADC not used, power down both ADC's and mic bias
-+ * output independently of user space mixer
-+ * selections */
-+ pd_ctrl |= TSC2301_REG_PD_MISC_ADPDL;
-+ pd_ctrl |= TSC2301_REG_PD_MISC_ADPDR;
-+ pd_ctrl |= TSC2301_REG_PD_MISC_MIBPD;
-+ }
-+ if (!mix->dac_enabled) {
-+ /* DAC not used, power down DAC independently of user
-+ * space mixer selections */
-+ pd_ctrl |= TSC2301_REG_PD_MISC_DAPD;
-+ }
-+
-+ if (mix->pll_output) {
-+ /* GPIO_0 is configured as PLL output so audio
-+ * controller is expecting clock from TSC2301. Either
-+ * ADC or DAC must be active in order to keep PLL on */
-+ if ((pd_ctrl & TSC2301_REG_PD_MISC_ADPDL) &&
-+ (pd_ctrl & TSC2301_REG_PD_MISC_ADPDR) &&
-+ (pd_ctrl & TSC2301_REG_PD_MISC_DAPD)) {
-+ /* neither ADC or DAC used. Force ADC on in
-+ * order to keep PLL active */
-+ pd_ctrl &= ~(TSC2301_REG_PD_MISC_ADPDL |
-+ TSC2301_REG_PD_MISC_ADPDR);
-+ }
-+ }
-+ } else {
-+ /* audio input clock is not enabled so power down DAC and ADC
-+ * in order to shutdown PLL and to keep touchscreen and keypad
-+ * parts working. Touchscreen and keypad use audio clock when
-+ * PLL is on and internal clock otherwise */
-+ pd_ctrl |= TSC2301_REG_PD_MISC_DAPD |
-+ TSC2301_REG_PD_MISC_ADPDL |
-+ TSC2301_REG_PD_MISC_ADPDR;
-+ }
-+
-+ if ((pd_ctrl & TSC2301_REG_PD_MISC_ADPDL) &&
-+ (pd_ctrl & TSC2301_REG_PD_MISC_ADPDR) &&
-+ (pd_ctrl & TSC2301_REG_PD_MISC_DAPD) &&
-+ (pd_ctrl & TSC2301_REG_PD_MISC_ABPD)) {
-+ /* all ADC, DAC and line bypass path unused. Power down the
-+ * whole audio part of the TSC2301 */
-+ pd_ctrl |= TSC2301_REG_PD_MISC_APD;
-+ }
-+
-+ if (pd_ctrl == pd_ctrl_old)
-+ return;
-+
-+ /* power down control changed. Update into TSC2301 */
-+ if ((pd_ctrl ^ pd_ctrl_old) & TSC2301_REG_PD_MISC_APD) {
-+ /* whole audio power state changed. Update GPIO states */
-+ if (pd_ctrl & TSC2301_REG_PD_MISC_APD) {
-+ /* power down GPIO controls before powering down
-+ * the codec */
-+ tsc2301_gpio_power_down(tsc);
-+ /* we must really ensure that codec has been on no less
-+ * than 100 msec before doing power-down */
-+ timeout = mix->pu_jiffies + TSC2301_MIN_PU_PERIOD -
-+ jiffies;
-+ if (timeout <= TSC2301_MIN_PU_PERIOD) {
-+ mix->delayed_pd_active = 1;
-+ mix->mclk_enabled++;
-+ schedule_delayed_work(&mix->delayed_power_down,
-+ timeout + 1);
-+ return;
-+ }
-+ } else
-+ /* restore GPIOs after codec is powered up */
-+ power_up = 1;
-+ }
-+ mix->shadow_regs[PD_MISC_INDEX] = pd_ctrl;
-+ tsc2301_write_reg(tsc, TSC2301_REG_PD_MISC, pd_ctrl);
-+ if (power_up)
-+ mix->pu_jiffies = jiffies;
-+ if (!poll_pdsts) {
-+ if (power_up)
-+ tsc2301_write_reg(tsc, TSC2301_REG_GPIO,
-+ mix->shadow_regs[GPIO_INDEX]);
-+ return;
-+ }
-+
-+ /* wait until power-up/-down is completed */
-+ timeout = jiffies + msecs_to_jiffies(100);
-+ w = 0;
-+ do {
-+ if (time_after(jiffies, timeout)) {
-+ /* Print a warning only if the I2S clock is not
-+ * present / out of sync. This can happen during
-+ * init time, when that clock will be turned on
-+ * by another driver like in the OMAP EAC with
-+ * external clock case.
-+ */
-+ if (w & TSC2301_REG_PD_MISC_OTSYN) {
-+ dev_warn(&tsc->spi->dev,
-+ "I2S clock not in sync or off.\n");
-+ } else {
-+ dev_err(&tsc->spi->dev,
-+ "power-up/-down timed out "
-+ "(0x%04x, 0x%04x -> 0x%04x)\n",
-+ w, pd_ctrl_old, pd_ctrl);
-+ }
-+ goto out;
-+ }
-+ w = tsc2301_read_reg(tsc, TSC2301_REG_PD_MISC);
-+ } while (!(w & TSC2301_REG_PD_MISC_PDSTS));
-+
-+out:
-+ if (((pd_ctrl ^ pd_ctrl_old) & TSC2301_REG_PD_MISC_DAPD) &&
-+ !(pd_ctrl & TSC2301_REG_PD_MISC_DAPD)) {
-+ /* DAC powered up now. Ensure that DAC and audio outputs are
-+ * activated. They are up 100 msec after the chip power-up
-+ * command */
-+ timeout = mix->pu_jiffies + TSC2301_DAC_DELAY - jiffies;
-+ if (timeout <= TSC2301_DAC_DELAY)
-+ schedule_timeout_interruptible(timeout);
-+ /* FIXME: This is lazy. We restore GPIOs only after activating
-+ * the DAC. It would be better to do some kind of delayed GPIO
-+ * restore. That ensures that we restore them also if only ADC
-+ * path is activated. But this is required only if there is
-+ * some input amplifier, bias control, etc. and their power
-+ * state is under TSC GPIO control */
-+ tsc2301_write_reg(tsc, TSC2301_REG_GPIO,
-+ mix->shadow_regs[GPIO_INDEX]);
-+ }
-+}
-+
-+static int snd_tsc2301_info_single(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ int mask = TSC2301_SINGLE_MASK(kcontrol->private_value);
-+ int minval = TSC2301_SINGLE_MINVAL(kcontrol->private_value);
-+
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = minval;
-+ uinfo->value.integer.max = mask;
-+
-+ return 0;
-+}
-+
-+static int snd_tsc2301_get_single(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct tsc2301 *tsc = kcontrol->private_data;
-+ unsigned long priv = kcontrol->private_value;
-+ int mask = TSC2301_SINGLE_MASK(priv);
-+ int shift = TSC2301_SINGLE_SHIFT(priv);
-+ int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+ u16 shadow_reg;
-+
-+ shadow_reg = tsc->mixer->shadow_regs[shadow_index];
-+
-+ ucontrol->value.integer.value[0] = (shadow_reg >> shift) & mask;
-+
-+ return 0;
-+}
-+
-+static int snd_tsc2301_put_single(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct tsc2301 *tsc = kcontrol->private_data;
-+ unsigned long priv = kcontrol->private_value;
-+ int mask = TSC2301_SINGLE_MASK(priv);
-+ int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+ u16 shadow_reg, shadow_reg_old;
-+ int shift = TSC2301_SINGLE_SHIFT(priv);
-+ int reg = TSC2301_PVAL_TO_REG(priv);
-+ int changed;
-+
-+ mutex_lock(&tsc->mixer->mutex);
-+ shadow_reg = shadow_reg_old = tsc->mixer->shadow_regs[shadow_index];
-+
-+ /* zero bits to be modified */
-+ shadow_reg &= ~(mask << shift);
-+ /* modify with new value */
-+ shadow_reg |= ((ucontrol->value.integer.value[0] & mask) << shift);
-+
-+ changed = (shadow_reg != shadow_reg_old);
-+ tsc->mixer->shadow_regs[shadow_index] = shadow_reg;
-+
-+ /* update into TSC2301 if necessary */
-+ if (changed)
-+ tsc2301_write_reg(tsc, reg, shadow_reg);
-+ mutex_unlock(&tsc->mixer->mutex);
-+
-+ return changed;
-+}
-+
-+static int snd_tsc2301_info_double(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ /* mask == 1 : Switch
-+ * mask > 1 : Max volume */
-+ int mask = TSC2301_DOUBLE_MASK(kcontrol->private_value);
-+ int minval = TSC2301_DOUBLE_MINVAL(kcontrol->private_value);
-+
-+ uinfo->type = mask == 1 ? SNDRV_CTL_ELEM_TYPE_BOOLEAN :
-+ SNDRV_CTL_ELEM_TYPE_INTEGER;
-+ uinfo->count = 2;
-+ uinfo->value.integer.min = minval;
-+ uinfo->value.integer.max = mask;
-+
-+ return 0;
-+}
-+
-+static int snd_tsc2301_get_double(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct tsc2301 *tsc = kcontrol->private_data;
-+ unsigned long priv = kcontrol->private_value;
-+ /* mask == 1 : Switch
-+ * mask > 1 : Volume */
-+ int mask = TSC2301_DOUBLE_MASK(priv);
-+ int ls = TSC2301_DOUBLE_LEFT_SHIFT(priv);
-+ int rs = TSC2301_DOUBLE_RIGHT_SHIFT(priv);
-+ int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+ u16 shadow_reg;
-+
-+ shadow_reg = tsc->mixer->shadow_regs[shadow_index];
-+
-+ /* invert mute bits for the switches */
-+ if (mask == 1)
-+ shadow_reg = ~shadow_reg;
-+
-+ ucontrol->value.integer.value[0] = (shadow_reg >> ls) & mask;
-+ ucontrol->value.integer.value[1] = (shadow_reg >> rs) & mask;
-+
-+ return 0;
-+}
-+
-+static int snd_tsc2301_put_double(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct tsc2301 *tsc = kcontrol->private_data;
-+ unsigned long priv = kcontrol->private_value;
-+ /* mask == 1 : Switch
-+ * mask > 1 : Volume */
-+ int mask = TSC2301_DOUBLE_MASK(priv);
-+ int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+ u16 shadow_reg, shadow_reg_old;
-+ int ls = TSC2301_DOUBLE_LEFT_SHIFT(priv);
-+ int rs = TSC2301_DOUBLE_RIGHT_SHIFT(priv);
-+ int reg = TSC2301_PVAL_TO_REG(priv);
-+ int changed;
-+
-+ mutex_lock(&tsc->mixer->mutex);
-+ shadow_reg = shadow_reg_old = tsc->mixer->shadow_regs[shadow_index];
-+
-+ /* zero bits to be modified */
-+ shadow_reg &= ~((mask << ls) | (mask << rs));
-+ /* modify with new value */
-+ if (mask == 1) {
-+ /* switch. Invert switch values for the mute bits */
-+ shadow_reg |=
-+ ((~ucontrol->value.integer.value[0] & mask) << ls) |
-+ ((~ucontrol->value.integer.value[1] & mask) << rs);
-+ } else {
-+ /* volume */
-+ shadow_reg |=
-+ (ucontrol->value.integer.value[0] << ls) |
-+ (ucontrol->value.integer.value[1] << rs);
-+ }
-+
-+ changed = (shadow_reg != shadow_reg_old);
-+ tsc->mixer->shadow_regs[shadow_index] = shadow_reg;
-+
-+ /* update into TSC2301 if necessary */
-+ if (changed)
-+ tsc2301_write_reg(tsc, reg, shadow_reg);
-+
-+ if (mask == 1)
-+ /* check is need to power down/up audio blocks in case of
-+ * muted state change */
-+ tsc2301_power_ctrl(tsc, shadow_index, 0);
-+ mutex_unlock(&tsc->mixer->mutex);
-+
-+ return changed;
-+}
-+
-+static int snd_tsc2301_info_mux(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ static char *texts[4] = {"Mic", "Line", "Line swapped", "Line mono"};
-+
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
-+ uinfo->count = 2;
-+ uinfo->value.enumerated.items = 4;
-+ if (uinfo->value.enumerated.item > 3)
-+ uinfo->value.enumerated.item = 3;
-+ strcpy(uinfo->value.enumerated.name,
-+ texts[uinfo->value.enumerated.item]);
-+
-+ return 0;
-+}
-+
-+static int snd_tsc2301_get_mux(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct tsc2301 *tsc = kcontrol->private_data;
-+ unsigned long priv = kcontrol->private_value;
-+ int mask = TSC2301_MUX_MASK(priv);
-+ int ls = TSC2301_MUX_LEFT_SHIFT(priv);
-+ int rs = TSC2301_MUX_RIGHT_SHIFT(priv);
-+ int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+ u16 shadow_reg;
-+
-+ shadow_reg = tsc->mixer->shadow_regs[shadow_index];
-+ ucontrol->value.enumerated.item[0] = (shadow_reg >> ls) & mask;
-+ ucontrol->value.enumerated.item[1] = (shadow_reg >> rs) & mask;
-+
-+ return 0;
-+}
-+
-+static int snd_tsc2301_put_mux(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct tsc2301 *tsc = kcontrol->private_data;
-+ unsigned long priv = kcontrol->private_value;
-+ int mask = TSC2301_MUX_MASK(priv);
-+ int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+ u16 shadow_reg, shadow_reg_old;
-+ int ls = TSC2301_MUX_LEFT_SHIFT(priv);
-+ int rs = TSC2301_MUX_RIGHT_SHIFT(priv);
-+ int reg = TSC2301_PVAL_TO_REG(priv);
-+ int changed;
-+
-+ mutex_lock(&tsc->mixer->mutex);
-+ shadow_reg = shadow_reg_old = tsc->mixer->shadow_regs[shadow_index];
-+
-+ /* zero bits to be modified */
-+ shadow_reg &= ~((mask << ls) | (mask << rs));
-+ /* modify with new value */
-+ shadow_reg |= (ucontrol->value.enumerated.item[0] << ls);
-+ shadow_reg |= (ucontrol->value.enumerated.item[1] << rs);
-+
-+ changed = (shadow_reg != shadow_reg_old);
-+
-+ /* update into TSC2301 if necessary */
-+ if (changed) {
-+ tsc->mixer->shadow_regs[shadow_index] = shadow_reg;
-+ tsc2301_write_reg(tsc, reg, shadow_reg);
-+ }
-+
-+ /* check is need to power up/down audio blocks in case of ADC input
-+ * change */
-+ tsc2301_power_ctrl(tsc, shadow_index, 0);
-+ mutex_unlock(&tsc->mixer->mutex);
-+
-+ return changed;
-+}
-+
-+static int snd_tsc2301_info_bool(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_info *uinfo)
-+{
-+ uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN;
-+ uinfo->count = 1;
-+ uinfo->value.integer.min = 0;
-+ uinfo->value.integer.max = 1;
-+
-+ return 0;
-+}
-+
-+static int snd_tsc2301_get_bool(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct tsc2301 *tsc = kcontrol->private_data;
-+ unsigned long priv = kcontrol->private_value;
-+ int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+ int shift = TSC2301_BOOL_SHIFT(priv);
-+ int invert = TSC2301_BOOL_INVERT(priv);
-+ u16 shadow_reg;
-+
-+ shadow_reg = tsc->mixer->shadow_regs[shadow_index];
-+ ucontrol->value.integer.value[0] =
-+ invert ^ ((shadow_reg >> shift) & 1);
-+
-+ return 0;
-+}
-+
-+static int snd_tsc2301_put_bool(struct snd_kcontrol *kcontrol,
-+ struct snd_ctl_elem_value *ucontrol)
-+{
-+ struct tsc2301 *tsc = kcontrol->private_data;
-+ unsigned long priv = kcontrol->private_value;
-+ int shadow_index = TSC2301_SHADOW_INDEX(priv);
-+ int shift = TSC2301_BOOL_SHIFT(priv);
-+ int invert = TSC2301_BOOL_INVERT(priv);
-+ int reg = TSC2301_PVAL_TO_REG(priv);
-+ u16 shadow_reg, shadow_reg_old;
-+ int changed;
-+
-+ mutex_lock(&tsc->mixer->mutex);
-+ shadow_reg = shadow_reg_old = tsc->mixer->shadow_regs[shadow_index];
-+
-+ /* zero bit to be modified */
-+ shadow_reg &= ~(1 << shift);
-+ /* modify with new value */
-+ shadow_reg |=
-+ (invert ^ (ucontrol->value.integer.value[0] & 1)) << shift;
-+
-+ changed = (shadow_reg != shadow_reg_old);
-+
-+ /* update into TSC2301 if necessary */
-+ if (changed) {
-+ tsc->mixer->shadow_regs[shadow_index] = shadow_reg;
-+ if ((shadow_index == GPIO_INDEX) &&
-+ (tsc->mixer->shadow_regs[PD_MISC_INDEX] &
-+ TSC2301_REG_PD_MISC_APD)) {
-+ /* changing GPIO control and audio is powered down.
-+ * Update GPIO states according to their power-down
-+ * flag */
-+ tsc2301_gpio_power_down(tsc);
-+ } else
-+ tsc2301_write_reg(tsc, reg, shadow_reg);
-+ }
-+ mutex_unlock(&tsc->mixer->mutex);
-+
-+ return changed;
-+}
-+
-+/* TSC2301 internal mixer controls */
-+static struct snd_kcontrol_new snd_tsc2301_controls[] = {
-+ /* stereo ADC input switches and volumes */
-+ TSC2301_DOUBLE("Capture Switch", 0,
-+ TSC2301_REG_ADCVOL, ADCVOL_INDEX,
-+ TSC2301_MUTE_LEFT_SHIFT, TSC2301_MUTE_RIGHT_SHIFT,
-+ 1, 0),
-+ TSC2301_DOUBLE("Capture Volume", 0,
-+ TSC2301_REG_ADCVOL, ADCVOL_INDEX,
-+ TSC2301_VOL_LEFT_SHIFT, TSC2301_VOL_RIGHT_SHIFT,
-+ TSC2301_VOLUME_MASK, TSC2301_MIN_ADCVOL),
-+
-+ /* stereo DAC output switches and volumes */
-+ TSC2301_DOUBLE("PCM Playback Switch", 0,
-+ TSC2301_REG_DACVOL, DACVOL_INDEX,
-+ TSC2301_MUTE_LEFT_SHIFT, TSC2301_MUTE_RIGHT_SHIFT,
-+ 1, 0),
-+ TSC2301_DOUBLE("PCM Playback Volume", 0,
-+ TSC2301_REG_DACVOL, DACVOL_INDEX,
-+ TSC2301_VOL_LEFT_SHIFT, TSC2301_VOL_RIGHT_SHIFT,
-+ TSC2301_VOLUME_MASK, TSC2301_MIN_DACVOL),
-+
-+ /* stereo line input bypass switches and volumes */
-+ TSC2301_DOUBLE("Line Playback Switch", 0,
-+ TSC2301_REG_BPVOL, BPVOL_INDEX,
-+ TSC2301_MUTE_LEFT_SHIFT, TSC2301_MUTE_RIGHT_SHIFT,
-+ 1, 0),
-+ TSC2301_DOUBLE("Line Playback Volume", 0,
-+ TSC2301_REG_BPVOL, BPVOL_INDEX,
-+ TSC2301_VOL_LEFT_SHIFT, TSC2301_VOL_RIGHT_SHIFT,
-+ TSC2301_VOLUME_MASK, TSC2301_MIN_BPVOL),
-+
-+ /* mono microphone input gain */
-+ TSC2301_SINGLE("Mic Boost", 0,
-+ TSC2301_REG_AUDCNTL, AUDCNTL_INDEX,
-+ TSC2301_MICG_SHIFT,
-+ TSC2301_MICG_MASK, TSC2301_MICG_MIN),
-+
-+ /* ADC input sources. Both channels could be selected separately */
-+ TSC2301_MUX("Capture Source", 0,
-+ TSC2301_REG_AUDCNTL, AUDCNTL_INDEX,
-+ TSC2301_INML_SHIFT, TSC2301_INMR_SHIFT,
-+ TSC2301_INM_MASK),
-+};
-+
-+/* must be called tsc->mixer->mutex locked */
-+static void tsc2301_flush_shadow_regs(struct tsc2301 *tsc)
-+{
-+ int i, page, addr;
-+ u16 temp;
-+
-+ page = TSC2301_REG_TO_PAGE(TSC2301_REG_AUDCNTL);
-+ addr = TSC2301_REG_TO_ADDR(TSC2301_REG_AUDCNTL);
-+
-+ for (i = 0; i < 4; i++) {
-+ temp = tsc->mixer->shadow_regs[i];
-+ tsc2301_write_reg(tsc, TSC2301_REG(page, addr + i), temp);
-+ }
-+ temp = tsc->mixer->shadow_regs[GPIO_INDEX];
-+ tsc2301_write_reg(tsc, TSC2301_REG_GPIO, temp);
-+
-+ /* Update power state of all audio blocks depending are they
-+ * muted or unused. */
-+ tsc2301_power_ctrl(tsc, -1, 0);
-+}
-+
-+#ifdef CONFIG_PM
-+int tsc2301_mixer_suspend(struct tsc2301 *tsc)
-+{
-+ /* power down entire audio section inside TSC2301 in case the
-+ * chip is still powered during the system sleep. However this driver
-+ * doesn't require that chip is powered because registers are restored
-+ * in function tsc2301_mixer_resume */
-+ mutex_lock(&tsc->mixer->mutex);
-+ tsc2301_gpio_power_down(tsc);
-+ tsc->mixer->shadow_regs[PD_MISC_INDEX] |= TSC2301_REG_PD_MISC_APD;
-+ tsc2301_write_reg(tsc, TSC2301_REG_PD_MISC,
-+ tsc->mixer->shadow_regs[PD_MISC_INDEX]);
-+ mutex_unlock(&tsc->mixer->mutex);
-+ return 0;
-+}
-+
-+void tsc2301_mixer_resume(struct tsc2301 *tsc)
-+{
-+ /* power up the TSC2301 audio section and restore registers */
-+ mutex_lock(&tsc->mixer->mutex);
-+ tsc->mixer->shadow_regs[PD_MISC_INDEX] &= ~TSC2301_REG_PD_MISC_APD;
-+ tsc2301_flush_shadow_regs(tsc);
-+ mutex_unlock(&tsc->mixer->mutex);
-+}
-+#endif
-+
-+void tsc2301_mixer_enable_mclk(struct device *dev)
-+{
-+ struct tsc2301 *tsc = dev_get_drvdata(dev);
-+ struct tsc2301_mixer *mix = tsc->mixer;
-+
-+ mutex_lock(&mix->mutex);
-+ if (!mix->mclk_enabled++ && tsc->enable_clock != NULL) {
-+ tsc->enable_clock(dev);
-+ }
-+ tsc2301_power_ctrl(tsc, -1, 1);
-+ mutex_unlock(&mix->mutex);
-+}
-+
-+void tsc2301_mixer_disable_mclk(struct device *dev)
-+{
-+ struct tsc2301 *tsc = dev_get_drvdata(dev);
-+ struct tsc2301_mixer *mix = tsc->mixer;
-+
-+ mutex_lock(&mix->mutex);
-+ mix->mclk_enabled--;
-+ tsc2301_power_ctrl(tsc, -1, 1);
-+ if (!mix->mclk_enabled && tsc->disable_clock != NULL) {
-+ tsc->disable_clock(dev);
-+ }
-+ mutex_unlock(&mix->mutex);
-+}
-+
-+static void tsc2301_mixer_delayed_power_down(struct work_struct *work)
-+{
-+ struct tsc2301_mixer *mix = container_of(work, struct tsc2301_mixer,
-+ delayed_power_down.work);
-+ struct tsc2301 *tsc = mix->tsc;
-+
-+ mutex_lock(&mix->mutex);
-+ if (!mix->delayed_pd_active) {
-+ mutex_unlock(&mix->mutex);
-+ return;
-+ }
-+ mix->delayed_pd_active = 0;
-+ mutex_unlock(&mix->mutex);
-+ tsc2301_mixer_disable_mclk(&tsc->spi->dev);
-+}
-+
-+/*
-+ * Allows audio controller driver to notify its usage of ADC and DAC
-+ */
-+void tsc2301_mixer_set_power(struct device *dev, int dac, int adc)
-+{
-+ struct tsc2301 *tsc = dev_get_drvdata(dev);
-+
-+ mutex_lock(&tsc->mixer->mutex);
-+ tsc->mixer->adc_enabled = adc;
-+ tsc->mixer->dac_enabled = dac;
-+
-+ /* update power state of all audio blocks */
-+ tsc2301_power_ctrl(tsc, -1, 1);
-+ mutex_unlock(&tsc->mixer->mutex);
-+}
-+
-+/*
-+ * Registers TSC2301 ALSA Mixer controls for the given sound card
-+ */
-+int tsc2301_mixer_register_controls(struct device *dev, struct snd_card *card)
-+{
-+ struct tsc2301 *tsc = dev_get_drvdata(dev);
-+ struct tsc2301_mixer *mix = tsc->mixer;
-+ int i, err;
-+
-+ /* Register ALSA mixer controls */
-+ for (i = 0; i < ARRAY_SIZE(snd_tsc2301_controls); i++) {
-+ err = snd_ctl_add(card,
-+ snd_ctl_new1(&snd_tsc2301_controls[i], tsc));
-+ if (err < 0)
-+ return err;
-+ }
-+
-+ if (!mix->n_mixer_gpios)
-+ return 0;
-+
-+ /* Register additional GPIO controls if defined */
-+ for (i = 0; i < mix->n_mixer_gpios; i++) {
-+ const struct tsc2301_mixer_gpio *mg = mix->mixer_gpios + i;
-+ struct snd_kcontrol *ctrlp;
-+ struct snd_kcontrol_new ctrl =
-+ TSC2301_BOOL((char *)mg->name, 0,
-+ TSC2301_REG_GPIO, GPIO_INDEX,
-+ mg->gpio, mg->inverted, mg->def_enable);
-+
-+ ctrlp = snd_ctl_new1(&ctrl, tsc);
-+ err = snd_ctl_add(card, ctrlp);
-+ if (err < 0)
-+ return err;
-+ }
-+
-+ return 0;
-+}
-+
-+int tsc2301_mixer_init(struct tsc2301 *tsc,
-+ struct tsc2301_platform_data *pdata)
-+{
-+ struct tsc2301_mixer *mix;
-+ int err = 0;
-+ u16 w;
-+
-+ mix = kzalloc(sizeof(*mix), GFP_KERNEL);
-+ if (mix == NULL)
-+ return -ENOMEM;
-+ tsc->mixer = mix;
-+
-+ mix->tsc = tsc;
-+ mutex_init(&mix->mutex);
-+ mix->platform_init = pdata->codec_init;
-+ mix->platform_cleanup = pdata->codec_cleanup;
-+ mix->pll_output = pdata->pll_output;
-+
-+ INIT_DELAYED_WORK(&mix->delayed_power_down,
-+ tsc2301_mixer_delayed_power_down);
-+
-+ /* initialize shadow register default values */
-+ w = 0xc000;
-+ w |= (pdata->mclk_ratio << 6) | (pdata->i2s_sample_rate << 2);
-+ w |= pdata->i2s_format;
-+ mix->shadow_regs[AUDCNTL_INDEX] = w;
-+ mix->shadow_regs[ADCVOL_INDEX] = 0xd7d7;
-+ mix->shadow_regs[DACVOL_INDEX] = 0xffff;
-+ mix->shadow_regs[BPVOL_INDEX] = 0xe7e7;
-+ mix->shadow_regs[PD_MISC_INDEX] = pdata->power_down_blocks;
-+
-+ /* if extra mixer controls configured, then configure associated
-+ * GPIOs as output and drive their default state */
-+ if (pdata->n_mixer_gpios) {
-+ int i;
-+
-+ w = 0;
-+ for (i = 0; i < pdata->n_mixer_gpios; i++) {
-+ const struct tsc2301_mixer_gpio *mg;
-+ int gpio;
-+
-+ mg = pdata->mixer_gpios + i;
-+ gpio = mg->gpio;
-+ w |= (1 << gpio) << 8;
-+ w |= (mg->inverted ^ mg->def_enable) << gpio;
-+ }
-+ mix->shadow_regs[GPIO_INDEX] = w;
-+
-+ mix->mixer_gpios = kmalloc(sizeof(*pdata->mixer_gpios) *
-+ pdata->n_mixer_gpios,
-+ GFP_KERNEL);
-+ if (mix->mixer_gpios == NULL) {
-+ err = -ENOMEM;
-+ goto err1;
-+ }
-+ memcpy(mix->mixer_gpios, pdata->mixer_gpios,
-+ sizeof(*pdata->mixer_gpios) * pdata->n_mixer_gpios);
-+ mix->n_mixer_gpios = pdata->n_mixer_gpios;
-+ }
-+
-+ /* PLL control */
-+ tsc2301_write_pll(tsc, pdata->pll_n, pdata->pll_a, pdata->pll_pdc,
-+ 0, mix->pll_output ? 0 : 1);
-+
-+ tsc2301_flush_shadow_regs(tsc);
-+
-+ if (mix->platform_init != NULL) {
-+ err = mix->platform_init(&tsc->spi->dev);
-+ if (err < 0)
-+ goto err2;
-+ }
-+
-+ return 0;
-+err2:
-+ if (mix->mixer_gpios != NULL)
-+ kfree(mix->mixer_gpios);
-+err1:
-+ kfree(mix);
-+ return err;
-+}
-+
-+void tsc2301_mixer_exit(struct tsc2301 *tsc)
-+{
-+ struct tsc2301_mixer *mixer = tsc->mixer;
-+
-+ if (mixer->platform_cleanup != NULL)
-+ mixer->platform_cleanup(&tsc->spi->dev);
-+
-+ if (mixer->mixer_gpios != NULL)
-+ kfree(mixer->mixer_gpios);
-+}
-+
-+MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/include/linux/spi/tsc2301.h
-@@ -0,0 +1,208 @@
-+#ifndef _LINUX_SPI_TSC2301_H
-+#define _LINUX_SPI_TSC2301_H
-+
-+#include <linux/types.h>
-+#include <linux/timer.h>
-+
-+struct tsc2301_platform_data {
-+ /*
-+ * Keypad
-+ */
-+ s16 reset_gpio;
-+ s16 keyb_int;
-+ s16 keymap[16]; /* Set a key to a negative value if not used */
-+ unsigned kp_rep:1; /* Enable keypad repeating */
-+ char *keyb_name; /* Keyboard device name */
-+
-+ /*
-+ * Touchscreen
-+ */
-+ s16 dav_int;
-+ u16 ts_x_plate_ohm;
-+ u32 ts_stab_time; /* voltage settling time */
-+ u8 ts_hw_avg; /* HW assiseted averaging. Can be
-+ 0, 4, 8, 16 samples per reading */
-+ u32 ts_max_pressure;/* Samples with bigger pressure value will
-+ be ignored, since the corresponding X, Y
-+ values are unreliable */
-+ u32 ts_touch_pressure; /* Pressure limit until we report a
-+ touch event. After that we switch
-+ to ts_max_pressure. */
-+ u32 ts_pressure_fudge;
-+ u32 ts_x_max;
-+ u32 ts_x_fudge;
-+ u32 ts_y_max;
-+ u32 ts_y_fudge;
-+
-+ /*
-+ * Audio
-+ */
-+ unsigned pll_pdc:4;
-+ unsigned pll_a:4;
-+ unsigned pll_n:4;
-+ unsigned pll_output:1; /* Output PLL on GPIO_0 */
-+
-+ unsigned mclk_ratio:2;
-+ unsigned i2s_sample_rate:4;
-+ unsigned i2s_format:2;
-+ /* Mask for audio blocks to be powered down */
-+ u16 power_down_blocks;
-+
-+ /* Called after codec has been initialized, can be NULL */
-+ int (* codec_init)(struct device *tsc2301_dev);
-+ /* Called when codec is being removed, can be NULL */
-+ void (* codec_cleanup)(struct device *tsc2301_dev);
-+ int (*enable_clock)(struct device *dev);
-+ void (*disable_clock)(struct device *dev);
-+
-+ const struct tsc2301_mixer_gpio {
-+ const char *name;
-+ unsigned gpio:4;
-+ unsigned inverted:1;
-+ unsigned def_enable:1; /* enable by default */
-+ unsigned deactivate_on_pd:1; /* power-down flag */
-+ } *mixer_gpios;
-+ int n_mixer_gpios;
-+};
-+
-+struct tsc2301_kp;
-+struct tsc2301_ts;
-+struct tsc2301_mixer;
-+
-+struct tsc2301 {
-+ struct spi_device *spi;
-+
-+ s16 reset_gpio;
-+ u16 config2_shadow;
-+
-+ struct tsc2301_kp *kp;
-+ struct tsc2301_ts *ts;
-+ struct tsc2301_mixer *mixer;
-+
-+ int (*enable_clock)(struct device *dev);
-+ void (*disable_clock)(struct device *dev);
-+};
-+
-+
-+#define TSC2301_HZ 33000000
-+
-+#define TSC2301_REG(page, addr) (((page) << 11) | ((addr) << 5))
-+#define TSC2301_REG_TO_PAGE(reg) (((reg) >> 11) & 0x03)
-+#define TSC2301_REG_TO_ADDR(reg) (((reg) >> 5) & 0x1f)
-+
-+#define TSC2301_REG_X TSC2301_REG(0, 0)
-+#define TSC2301_REG_Y TSC2301_REG(0, 1)
-+#define TSC2301_REG_Z1 TSC2301_REG(0, 2)
-+#define TSC2301_REG_Z2 TSC2301_REG(0, 3)
-+#define TSC2301_REG_KPDATA TSC2301_REG(0, 4)
-+#define TSC2301_REG_ADC TSC2301_REG(1, 0)
-+#define TSC2301_REG_KEY TSC2301_REG(1, 1)
-+#define TSC2301_REG_DAC TSC2301_REG(1, 2)
-+#define TSC2301_REG_REF TSC2301_REG(1, 3)
-+#define TSC2301_REG_RESET TSC2301_REG(1, 4)
-+#define TSC2301_REG_CONFIG TSC2301_REG(1, 5)
-+#define TSC2301_REG_CONFIG2 TSC2301_REG(1, 6)
-+#define TSC2301_REG_KPMASK TSC2301_REG(1, 16)
-+#define TSC2301_REG_AUDCNTL TSC2301_REG(2, 0)
-+#define TSC2301_REG_ADCVOL TSC2301_REG(2, 1)
-+#define TSC2301_REG_DACVOL TSC2301_REG(2, 2)
-+#define TSC2301_REG_BPVOL TSC2301_REG(2, 3)
-+#define TSC2301_REG_KEYCTL TSC2301_REG(2, 4)
-+#define TSC2301_REG_PD_MISC TSC2301_REG(2, 5)
-+#define TSC2301_REG_GPIO TSC2301_REG(2, 6)
-+#define TSC2301_REG_ADCLKCFG TSC2301_REG(2, 27)
-+
-+#define TSC2301_REG_PD_MISC_APD (1 << 15)
-+#define TSC2301_REG_PD_MISC_AVPD (1 << 14)
-+#define TSC2301_REG_PD_MISC_ABPD (1 << 13)
-+#define TSC2301_REG_PD_MISC_HAPD (1 << 12)
-+#define TSC2301_REG_PD_MISC_MOPD (1 << 11)
-+#define TSC2301_REG_PD_MISC_DAPD (1 << 10)
-+#define TSC2301_REG_PD_MISC_ADPDL (1 << 9)
-+#define TSC2301_REG_PD_MISC_ADPDR (1 << 8)
-+#define TSC2301_REG_PD_MISC_PDSTS (1 << 7)
-+#define TSC2301_REG_PD_MISC_MIBPD (1 << 6)
-+#define TSC2301_REG_PD_MISC_OTSYN (1 << 2)
-+
-+/* I2S sample rate */
-+#define TSC2301_I2S_SR_48000 0x00
-+#define TSC2301_I2S_SR_44100 0x01
-+#define TSC2301_I2S_SR_32000 0x02
-+#define TSC2301_I2S_SR_24000 0x03
-+#define TSC2301_I2S_SR_22050 0x04
-+#define TSC2301_I2S_SR_16000 0x05
-+#define TSC2301_I2S_SR_12000 0x06
-+#define TSC2301_I2S_SR_11050 0x07
-+#define TSC2301_I2S_SR_8000 0x08
-+
-+/* 16-bit, MSB-first. DAC Right-Justified, ADC Left-Justified */
-+#define TSC2301_I2S_FORMAT0 0x00
-+/* 20-bit, MSB-first. DAC Right-Justified, ADC Left-Justified */
-+#define TSC2301_I2S_FORMAT1 0x01
-+/* 20-bit, MSB-first. DAC Left-Justified, ADC Left-Justified */
-+#define TSC2301_I2S_FORMAT2 0x02
-+/* 20-bit, MSB-first */
-+#define TSC2301_I2S_FORMAT3 0x03
-+
-+/* Master Clock Ratio */
-+#define TSC2301_MCLK_256xFS 0x00 /* default */
-+#define TSC2301_MCLK_384xFS 0x01
-+#define TSC2301_MCLK_512xFS 0x02
-+
-+
-+extern u16 tsc2301_read_reg(struct tsc2301 *tsc, int reg);
-+extern void tsc2301_write_reg(struct tsc2301 *tsc, int reg, u16 val);
-+extern void tsc2301_write_kbc(struct tsc2301 *tsc, int val);
-+extern void tsc2301_write_pll(struct tsc2301 *tsc, int pll_n, int pll_a,
-+ int pll_pdc, int pct_e, int pll_o);
-+extern void tsc2301_read_buf(struct tsc2301 *tsc, int reg, u16 *buf, int len);
-+
-+#define TSC2301_DECL_MOD(module) \
-+extern int tsc2301_##module##_init(struct tsc2301 *tsc, \
-+ struct tsc2301_platform_data *pdata); \
-+extern void tsc2301_##module##_exit(struct tsc2301 *tsc); \
-+extern int tsc2301_##module##_suspend(struct tsc2301 *tsc); \
-+extern void tsc2301_##module##_resume(struct tsc2301 *tsc);
-+
-+#define TSC2301_DECL_EMPTY_MOD(module) \
-+static inline int tsc2301_##module##_init(struct tsc2301 *tsc, \
-+ struct tsc2301_platform_data *pdata) \
-+{ \
-+ return 0; \
-+} \
-+static inline void tsc2301_##module##_exit(struct tsc2301 *tsc) {} \
-+static inline int tsc2301_##module##_suspend(struct tsc2301 *tsc) \
-+{ \
-+ return 0; \
-+} \
-+static inline void tsc2301_##module##_resume(struct tsc2301 *tsc) {}
-+
-+#ifdef CONFIG_KEYBOARD_TSC2301
-+TSC2301_DECL_MOD(kp)
-+void tsc2301_kp_restart(struct tsc2301 *tsc);
-+#else
-+TSC2301_DECL_EMPTY_MOD(kp)
-+static inline void tsc2301_kp_restart(struct tsc2301 *tsc) {}
-+#endif
-+
-+#ifdef CONFIG_TOUCHSCREEN_TSC2301
-+TSC2301_DECL_MOD(ts)
-+#else
-+TSC2301_DECL_EMPTY_MOD(ts)
-+#endif
-+
-+#ifdef CONFIG_SPI_TSC2301_AUDIO
-+TSC2301_DECL_MOD(mixer)
-+extern void tsc2301_mixer_set_power(struct device *tsc_dev, int dac, int adc);
-+
-+struct snd_card;
-+extern int tsc2301_mixer_register_controls(struct device *tsc_dev,
-+ struct snd_card *card);
-+#else
-+TSC2301_DECL_EMPTY_MOD(mixer)
-+#endif
-+
-+extern void tsc2301_mixer_enable_mclk(struct device *tsc_dev);
-+extern void tsc2301_mixer_disable_mclk(struct device *tsc_dev);
-+
-+#endif
+++ /dev/null
---- a/arch/arm/mach-omap2/board-n8x0.c
-+++ b/arch/arm/mach-omap2/board-n8x0.c
-@@ -25,6 +25,8 @@
- #include <linux/usb/musb.h>
- #include <sound/tlv320aic3x.h>
- #include <linux/spi/tsc2005.h>
-+#include <linux/input.h>
-+#include <linux/i2c/lm8323.h>
-
- #include <asm/mach/arch.h>
- #include <asm/mach-types.h>
-@@ -37,6 +39,7 @@
- #include <plat/onenand.h>
- #include <plat/mmc.h>
- #include <plat/serial.h>
-+#include <plat/gpio-switch.h>
-
- #include "mux.h"
-
-@@ -104,6 +107,152 @@ extern struct mipid_platform_data n8x0_m
- extern void n8x0_mipid_init(void);
- extern void n8x0_blizzard_init(void);
-
-+/* We map the FN key as LALT to workaround an X keycode problem.
-+ * The XKB map needs to be adjusted to support this. */
-+#define MAP_FN_AS_LEFTALT
-+
-+static s16 rx44_keymap[LM8323_KEYMAP_SIZE] = {
-+ [0x01] = KEY_Q,
-+ [0x02] = KEY_K,
-+ [0x03] = KEY_O,
-+ [0x04] = KEY_P,
-+ [0x05] = KEY_BACKSPACE,
-+ [0x06] = KEY_A,
-+ [0x07] = KEY_S,
-+ [0x08] = KEY_D,
-+ [0x09] = KEY_F,
-+ [0x0a] = KEY_G,
-+ [0x0b] = KEY_H,
-+ [0x0c] = KEY_J,
-+
-+ [0x11] = KEY_W,
-+ [0x12] = KEY_F4,
-+ [0x13] = KEY_L,
-+ [0x14] = KEY_APOSTROPHE,
-+ [0x16] = KEY_Z,
-+ [0x17] = KEY_X,
-+ [0x18] = KEY_C,
-+ [0x19] = KEY_V,
-+ [0x1a] = KEY_B,
-+ [0x1b] = KEY_N,
-+ [0x1c] = KEY_LEFTSHIFT, /* Actually, this is both shift keys */
-+ [0x1f] = KEY_F7,
-+
-+ [0x21] = KEY_E,
-+ [0x22] = KEY_SEMICOLON,
-+ [0x23] = KEY_MINUS,
-+ [0x24] = KEY_EQUAL,
-+#ifdef MAP_FN_AS_LEFTALT
-+ [0x2b] = KEY_LEFTALT,
-+#else
-+ [0x2b] = KEY_FN,
-+#endif
-+ [0x2c] = KEY_M,
-+ [0x2f] = KEY_F8,
-+
-+ [0x31] = KEY_R,
-+ [0x32] = KEY_RIGHTCTRL,
-+ [0x34] = KEY_SPACE,
-+ [0x35] = KEY_COMMA,
-+ [0x37] = KEY_UP,
-+ [0x3c] = KEY_COMPOSE,
-+ [0x3f] = KEY_F6,
-+
-+ [0x41] = KEY_T,
-+ [0x44] = KEY_DOT,
-+ [0x46] = KEY_RIGHT,
-+ [0x4f] = KEY_F5,
-+ [0x51] = KEY_Y,
-+ [0x53] = KEY_DOWN,
-+ [0x55] = KEY_ENTER,
-+ [0x5f] = KEY_ESC,
-+
-+ [0x61] = KEY_U,
-+ [0x64] = KEY_LEFT,
-+
-+ [0x71] = KEY_I,
-+ [0x75] = KEY_KPENTER,
-+};
-+
-+static struct lm8323_platform_data lm8323_pdata = {
-+ .repeat = 0, /* Repeat is handled in userspace for now. */
-+ .keymap = rx44_keymap,
-+ .size_x = 8,
-+ .size_y = 12,
-+ .debounce_time = 12,
-+ .active_time = 500,
-+
-+ .name = "Internal keyboard",
-+ .pwm_names[0] = "n810::keyboard",
-+ .pwm_names[1] = "n810::cover",
-+};
-+
-+#define OMAP_TAG_NOKIA_BT 0x4e01
-+
-+struct omap_bluetooth_config {
-+ u8 chip_type;
-+ u8 bt_wakeup_gpio;
-+ u8 host_wakeup_gpio;
-+ u8 reset_gpio;
-+ u8 bt_uart;
-+ u8 bd_addr[6];
-+ u8 bt_sysclk;
-+};
-+
-+static struct platform_device n8x0_bt_device = {
-+ .name = "hci_h4p",
-+ .id = -1,
-+ .num_resources = 0,
-+};
-+
-+void __init n8x0_bt_init(void)
-+{
-+ const struct omap_bluetooth_config *bt_config;
-+
-+ bt_config = (void *) omap_get_config(OMAP_TAG_NOKIA_BT,
-+ struct omap_bluetooth_config);
-+ n8x0_bt_device.dev.platform_data = (void *) bt_config;
-+ if (platform_device_register(&n8x0_bt_device) < 0)
-+ BUG();
-+}
-+
-+static struct omap_gpio_switch n8x0_gpio_switches[] __initdata = {
-+ {
-+ .name = "headphone",
-+ .gpio = -1,
-+ .debounce_rising = 200,
-+ .debounce_falling = 200,
-+ }, {
-+ .name = "cam_act",
-+ .gpio = -1,
-+ .debounce_rising = 200,
-+ .debounce_falling = 200,
-+ }, {
-+ .name = "cam_turn",
-+ .gpio = -1,
-+ .debounce_rising = 100,
-+ .debounce_falling = 100,
-+ }, {
-+ .name = "slide",
-+ .gpio = -1,
-+ .debounce_rising = 200,
-+ .debounce_falling = 200,
-+ }, {
-+ .name = "kb_lock",
-+ .gpio = -1,
-+ .debounce_rising = 200,
-+ .debounce_falling = 200,
-+ },
-+};
-+
-+static void __init n8x0_gpio_switches_init(void)
-+{
-+ /* The switches are actually registered through ATAG mechanism.
-+ * This just updates the parameters (thus .gpio is -1) */
-+ omap_register_gpio_switches(n8x0_gpio_switches,
-+ ARRAY_SIZE(n8x0_gpio_switches));
-+}
-+
- #define TUSB6010_ASYNC_CS 1
- #define TUSB6010_SYNC_CS 4
- #define TUSB6010_GPIO_INT 58
-@@ -799,6 +948,11 @@ static struct aic3x_pdata n810_aic33_dat
- };
-
- static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
-+ {
-+ I2C_BOARD_INFO("lm8323", 0x45),
-+ .irq = OMAP_GPIO_IRQ(109),
-+ .platform_data = &lm8323_pdata,
-+ },
- {
- I2C_BOARD_INFO("tlv320aic3x", 0x18),
- .platform_data = &n810_aic33_data,
-@@ -856,7 +1010,9 @@ static inline void board_serial_init(voi
- static void __init n8x0_init_machine(void)
- {
- omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
-+ n8x0_gpio_switches_init();
- n8x0_cbus_init();
-+ n8x0_bt_init();
-
- /* FIXME: add n810 spi devices */
- tsc2005_set_config();
+++ /dev/null
-From f0bb9e67f0f13021e5033fed3dfe8ef78fe6a538 Mon Sep 17 00:00:00 2001
-From: Marat Radchenko <marat@slonopotamus.org>
-Date: Tue, 18 Oct 2011 21:52:56 +0400
-Subject: [PATCH 2/2] N800: add TSC2301 board info
-
-This patch adds TSC2301 init logic to N800 board file
----
- arch/arm/mach-omap2/board-n8x0.c | 141 ++++++++++++++++++++++++++++++++++++--
- 1 files changed, 135 insertions(+), 6 deletions(-)
-
---- a/arch/arm/mach-omap2/board-n8x0.c
-+++ b/arch/arm/mach-omap2/board-n8x0.c
-@@ -27,6 +27,7 @@
- #include <linux/spi/tsc2005.h>
- #include <linux/input.h>
- #include <linux/i2c/lm8323.h>
-+#include <linux/spi/tsc2301.h>
-
- #include <asm/mach/arch.h>
- #include <asm/mach-types.h>
-@@ -63,7 +64,75 @@ static struct omap2_mcspi_device_config
- };
- #endif
-
--static void __init tsc2005_set_config(void)
-+#ifdef CONFIG_TOUCHSCREEN_TSC2301
-+
-+#define N800_KEYB_IRQ_GPIO 109
-+
-+static struct tsc2301_platform_data tsc2301_config = {
-+ .reset_gpio = 118,
-+ .keymap = {
-+ -1, /* Event for bit 0 */
-+ KEY_UP, /* Event for bit 1 (up) */
-+ KEY_F5, /* Event for bit 2 (home) */
-+ -1, /* Event for bit 3 */
-+ KEY_LEFT, /* Event for bit 4 (left) */
-+ KEY_ENTER, /* Event for bit 5 (enter) */
-+ KEY_RIGHT, /* Event for bit 6 (right) */
-+ -1, /* Event for bit 7 */
-+ KEY_ESC, /* Event for bit 8 (cycle) */
-+ KEY_DOWN, /* Event for bit 9 (down) */
-+ KEY_F4, /* Event for bit 10 (menu) */
-+ -1, /* Event for bit 11 */
-+ KEY_F8, /* Event for bit 12 (Zoom-) */
-+ KEY_F6, /* Event for bit 13 (FS) */
-+ KEY_F7, /* Event for bit 14 (Zoom+) */
-+ -1, /* Event for bit 15 */
-+ },
-+ .kp_rep = 0,
-+ .keyb_name = "Internal keypad",
-+};
-+
-+static struct omap2_mcspi_device_config tsc2301_mcspi_config = {
-+ .turbo_mode = 0,
-+ .single_channel = 1,
-+};
-+
-+/*
-+ TODO(Marat Radchenko): better pass GPIO to tsc2301 driver and let it
-+ allocate irq itself (as it is already done for touchscreen)
-+ */
-+static void tsc2301_dev_init(void)
-+{
-+ int r;
-+ int gpio = N800_KEYB_IRQ_GPIO;
-+
-+ r = gpio_request(gpio, "tsc2301 KBD IRQ");
-+ if (r >= 0) {
-+ gpio_direction_input(gpio);
-+ tsc2301_config.keyb_int = gpio_to_irq(gpio);
-+ } else {
-+ printk(KERN_ERR "unable to get KBD GPIO");
-+ }
-+
-+ gpio = 103;
-+ r = gpio_request(gpio, "tsc2301 DAV IRQ");
-+ if (r >= 0) {
-+ gpio_direction_input(gpio);
-+ tsc2301_config.dav_int = gpio_to_irq(gpio);
-+ } else {
-+ printk(KERN_ERR "unable to get DAV GPIO");
-+ }
-+}
-+
-+#else
-+
-+static void __init tsc2301_dev_init(void)
-+{
-+}
-+
-+#endif
-+
-+static void __init n8x0_ts_set_config(void)
- {
- const struct omap_lcd_config *conf;
-
-@@ -94,6 +163,37 @@ static void __init tsc2005_set_config(vo
- tsc2005_config.ts_x_plate_ohm = 200;
- }
- #endif
-+
-+#ifdef CONFIG_TOUCHSCREEN_TSC2301
-+ if (strcmp(conf->panel_name, "lph8923") == 0) {
-+ tsc2301_config.ts_x_plate_ohm = 180;
-+ tsc2301_config.ts_hw_avg = 8;
-+ tsc2301_config.ts_max_pressure = 2048;
-+ tsc2301_config.ts_touch_pressure = 400;
-+ tsc2301_config.ts_stab_time = 100;
-+ tsc2301_config.ts_pressure_fudge = 2;
-+ tsc2301_config.ts_x_max = 4096;
-+ tsc2301_config.ts_x_fudge = 4;
-+ tsc2301_config.ts_y_max = 4096;
-+ tsc2301_config.ts_y_fudge = 7;
-+ } else if (strcmp(conf->panel_name, "ls041y3") == 0) {
-+ tsc2301_config.ts_x_plate_ohm = 280;
-+ tsc2301_config.ts_hw_avg = 8;
-+ tsc2301_config.ts_touch_pressure = 400;
-+ tsc2301_config.ts_max_pressure = 2048;
-+ tsc2301_config.ts_stab_time = 1000;
-+ tsc2301_config.ts_pressure_fudge = 2;
-+ tsc2301_config.ts_x_max = 4096;
-+ tsc2301_config.ts_x_fudge = 4;
-+ tsc2301_config.ts_y_max = 4096;
-+ tsc2301_config.ts_y_fudge = 7;
-+ } else {
-+ printk(KERN_ERR "Unknown panel type, set default "
-+ "touchscreen configuration\n");
-+ tsc2301_config.ts_x_plate_ohm = 200;
-+ tsc2301_config.ts_stab_time = 100;
-+ }
-+#endif
- }
- }
-
-@@ -347,13 +447,12 @@ static void __init n8x0_usb_init(void) {
-
- #endif /*CONFIG_USB_MUSB_TUSB6010 */
-
--
- static struct omap2_mcspi_device_config p54spi_mcspi_config = {
- .turbo_mode = 0,
- .single_channel = 1,
- };
-
--static struct spi_board_info n800_spi_board_info[] __initdata = {
-+static struct spi_board_info n8x0_common_spi_board_info[] __initdata = {
- {
- .modalias = "lcd_mipid",
- .bus_num = 1,
-@@ -369,6 +468,10 @@ static struct spi_board_info n800_spi_bo
- .max_speed_hz = 48000000,
- .controller_data = &p54spi_mcspi_config,
- },
-+};
-+
-+static struct spi_board_info n810_spi_board_info[] __initdata = {
-+#ifdef CONFIG_TOUCHSCREEN_TSC2005
- {
- .modalias = "tsc2005",
- .bus_num = 1,
-@@ -378,6 +481,20 @@ static struct spi_board_info n800_spi_bo
- .controller_data = &tsc2005_mcspi_config,
- .platform_data = &tsc2005_config,
- },
-+#endif
-+};
-+
-+static struct spi_board_info n800_spi_board_info[] __initdata = {
-+#if defined(CONFIG_TOUCHSCREEN_TSC2301)
-+ {
-+ .modalias = "tsc2301",
-+ .bus_num = 1,
-+ .chip_select = 0,
-+ .max_speed_hz = 6000000,
-+ .controller_data = &tsc2301_mcspi_config,
-+ .platform_data = &tsc2301_config,
-+ },
-+#endif
- };
-
- #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-@@ -1015,9 +1132,17 @@ static void __init n8x0_init_machine(voi
- n8x0_bt_init();
-
- /* FIXME: add n810 spi devices */
-- tsc2005_set_config();
-- spi_register_board_info(n800_spi_board_info,
-- ARRAY_SIZE(n800_spi_board_info));
-+ n8x0_ts_set_config();
-+
-+ spi_register_board_info(n8x0_common_spi_board_info,
-+ ARRAY_SIZE(n8x0_common_spi_board_info));
-+ if (machine_is_nokia_n800())
-+ spi_register_board_info(n800_spi_board_info,
-+ ARRAY_SIZE(n800_spi_board_info));
-+ else
-+ spi_register_board_info(n810_spi_board_info,
-+ ARRAY_SIZE(n810_spi_board_info));
-+
- omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
- ARRAY_SIZE(n8x0_i2c_board_info_1));
- omap_register_i2c_bus(2, 400, NULL, 0);
-@@ -1027,6 +1152,8 @@ static void __init n8x0_init_machine(voi
- board_serial_init();
- n8x0_mipid_init();
- n8x0_blizzard_init();
-+ if (machine_is_nokia_n800())
-+ tsc2301_dev_init();
- omap_sdrc_init(NULL, NULL);
- gpmc_onenand_init(board_onenand_data);
- n8x0_mmc_init();
+++ /dev/null
----
- arch/arm/mach-omap2/board-n8x0.c | 73 +++++++++++++++++++++++++++++++++++++++
- 1 file changed, 73 insertions(+)
-
---- a/arch/arm/mach-omap2/board-n8x0.c
-+++ b/arch/arm/mach-omap2/board-n8x0.c
-@@ -316,6 +316,77 @@ void __init n8x0_bt_init(void)
- BUG();
- }
-
-+struct gpio_switch_input_dev {
-+ struct input_dev *idev;
-+ unsigned int swcode;
-+};
-+
-+static struct gpio_switch_input_dev *slide_input;
-+static struct gpio_switch_input_dev *kblock_input;
-+
-+static void n8x0_gpio_switch_input_notify(struct gpio_switch_input_dev *gdev,
-+ int state)
-+{
-+ if (gdev) {
-+ input_report_switch(gdev->idev, gdev->swcode, state);
-+ input_sync(gdev->idev);
-+ }
-+}
-+
-+static void n8x0_slide_notify(void *data, int state)
-+{
-+ n8x0_gpio_switch_input_notify(slide_input, state);
-+}
-+
-+static void n8x0_kb_lock_notify(void *data, int state)
-+{
-+ n8x0_gpio_switch_input_notify(kblock_input, state);
-+}
-+
-+static struct gpio_switch_input_dev * __init gpioswitch_input_init(
-+ const char *name,
-+ unsigned int swcode)
-+{
-+ struct gpio_switch_input_dev *gdev;
-+ int err;
-+
-+ gdev = kzalloc(sizeof(*gdev), GFP_KERNEL);
-+ if (!gdev)
-+ goto error;
-+ gdev->swcode = swcode;
-+
-+ gdev->idev = input_allocate_device();
-+ if (!gdev->idev)
-+ goto err_free;
-+
-+ gdev->idev->evbit[0] = BIT_MASK(EV_SW);
-+ gdev->idev->swbit[BIT_WORD(swcode)] = BIT_MASK(swcode);
-+ gdev->idev->name = name;
-+
-+ err = input_register_device(gdev->idev);
-+ if (err)
-+ goto err_free_idev;
-+
-+ return gdev;
-+
-+err_free_idev:
-+ input_free_device(gdev->idev);
-+err_free:
-+ kfree(gdev);
-+error:
-+ return NULL;
-+}
-+
-+static int __init n8x0_gpio_switches_input_init(void)
-+{
-+ slide_input = gpioswitch_input_init("slide", SW_KEYPAD_SLIDE);
-+ kblock_input = gpioswitch_input_init("kb_lock", SW_LID);
-+ if (WARN_ON(!slide_input || !kblock_input))
-+ return -ENODEV;
-+ return 0;
-+}
-+late_initcall(n8x0_gpio_switches_input_init);
-+
- static struct omap_gpio_switch n8x0_gpio_switches[] __initdata = {
- {
- .name = "headphone",
-@@ -337,11 +408,13 @@ static struct omap_gpio_switch n8x0_gpio
- .gpio = -1,
- .debounce_rising = 200,
- .debounce_falling = 200,
-+ .notify = n8x0_slide_notify,
- }, {
- .name = "kb_lock",
- .gpio = -1,
- .debounce_rising = 200,
- .debounce_falling = 200,
-+ .notify = n8x0_kb_lock_notify,
- },
- };
-
+++ /dev/null
----
- drivers/bluetooth/Kconfig | 10
- drivers/bluetooth/Makefile | 1
- drivers/bluetooth/hci_h4p/Makefile | 7
- drivers/bluetooth/hci_h4p/core.c | 1043 ++++++++++++++++++++++++++++++++++++
- drivers/bluetooth/hci_h4p/fw-csr.c | 149 +++++
- drivers/bluetooth/hci_h4p/fw-ti.c | 90 +++
- drivers/bluetooth/hci_h4p/fw.c | 155 +++++
- drivers/bluetooth/hci_h4p/hci_h4p.h | 183 ++++++
- drivers/bluetooth/hci_h4p/sysfs.c | 84 ++
- drivers/bluetooth/hci_h4p/uart.c | 169 +++++
- 10 files changed, 1891 insertions(+)
-
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/core.c
-@@ -0,0 +1,1043 @@
-+/*
-+ * This file is part of hci_h4p bluetooth driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation.
-+ *
-+ * Contact: Ville Tervo <ville.tervo@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/module.h>
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/delay.h>
-+#include <linux/spinlock.h>
-+#include <linux/serial_reg.h>
-+#include <linux/skbuff.h>
-+#include <linux/timer.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/gpio.h>
-+
-+#include <mach/hardware.h>
-+#include <mach/board.h>
-+#include <mach/irqs.h>
-+#include <plat/serial.h>
-+
-+#include <net/bluetooth/bluetooth.h>
-+#include <net/bluetooth/hci_core.h>
-+#include <net/bluetooth/hci.h>
-+
-+#include "hci_h4p.h"
-+
-+#define PM_TIMEOUT 200
-+
-+struct omap_bluetooth_config {
-+ u8 chip_type;
-+ u8 bt_wakeup_gpio;
-+ u8 host_wakeup_gpio;
-+ u8 reset_gpio;
-+ u8 bt_uart;
-+ u8 bd_addr[6];
-+ u8 bt_sysclk;
-+};
-+
-+/* This should be used in function that cannot release clocks */
-+static void hci_h4p_set_clk(struct hci_h4p_info *info, int *clock, int enable)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&info->clocks_lock, flags);
-+ if (enable && !*clock) {
-+ NBT_DBG_POWER("Enabling %p\n", clock);
-+ clk_enable(info->uart_fclk);
-+#ifdef CONFIG_ARCH_OMAP2
-+ if (cpu_is_omap24xx()) {
-+ clk_enable(info->uart_iclk);
-+ //omap2_block_sleep();
-+ }
-+#endif
-+ }
-+ if (!enable && *clock) {
-+ NBT_DBG_POWER("Disabling %p\n", clock);
-+ clk_disable(info->uart_fclk);
-+#ifdef CONFIG_ARCH_OMAP2
-+ if (cpu_is_omap24xx()) {
-+ clk_disable(info->uart_iclk);
-+ //omap2_allow_sleep();
-+ }
-+#endif
-+ }
-+
-+ *clock = enable;
-+ spin_unlock_irqrestore(&info->clocks_lock, flags);
-+}
-+
-+/* Power management functions */
-+static void hci_h4p_disable_tx(struct hci_h4p_info *info)
-+{
-+ NBT_DBG_POWER("\n");
-+
-+ if (!info->pm_enabled)
-+ return;
-+
-+ mod_timer(&info->tx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT));
-+}
-+
-+static void hci_h4p_enable_tx(struct hci_h4p_info *info)
-+{
-+ NBT_DBG_POWER("\n");
-+
-+ if (!info->pm_enabled)
-+ return;
-+
-+ del_timer_sync(&info->tx_pm_timer);
-+ if (info->tx_pm_enabled) {
-+ info->tx_pm_enabled = 0;
-+ hci_h4p_set_clk(info, &info->tx_clocks_en, 1);
-+ gpio_set_value(info->bt_wakeup_gpio, 1);
-+ }
-+}
-+
-+static void hci_h4p_tx_pm_timer(unsigned long data)
-+{
-+ struct hci_h4p_info *info;
-+
-+ NBT_DBG_POWER("\n");
-+
-+ info = (struct hci_h4p_info *)data;
-+
-+ if (hci_h4p_inb(info, UART_LSR) & UART_LSR_TEMT) {
-+ gpio_set_value(info->bt_wakeup_gpio, 0);
-+ hci_h4p_set_clk(info, &info->tx_clocks_en, 0);
-+ info->tx_pm_enabled = 1;
-+ }
-+ else {
-+ mod_timer(&info->tx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT));
-+ }
-+}
-+
-+static void hci_h4p_disable_rx(struct hci_h4p_info *info)
-+{
-+ if (!info->pm_enabled)
-+ return;
-+
-+ mod_timer(&info->rx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT));
-+}
-+
-+static void hci_h4p_enable_rx(struct hci_h4p_info *info)
-+{
-+ unsigned long flags;
-+
-+ if (!info->pm_enabled)
-+ return;
-+
-+ del_timer_sync(&info->rx_pm_timer);
-+ spin_lock_irqsave(&info->lock, flags);
-+ if (info->rx_pm_enabled) {
-+ hci_h4p_set_clk(info, &info->rx_clocks_en, 1);
-+ hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | UART_IER_RDI);
-+ __hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_RTS);
-+ info->rx_pm_enabled = 0;
-+ }
-+ spin_unlock_irqrestore(&info->lock, flags);
-+}
-+
-+static void hci_h4p_rx_pm_timer(unsigned long data)
-+{
-+ unsigned long flags;
-+ struct hci_h4p_info *info = (struct hci_h4p_info *)data;
-+
-+ spin_lock_irqsave(&info->lock, flags);
-+ if (!(hci_h4p_inb(info, UART_LSR) & UART_LSR_DR)) {
-+ __hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_RTS);
-+ hci_h4p_set_rts(info, 0);
-+ hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) & ~UART_IER_RDI);
-+ hci_h4p_set_clk(info, &info->rx_clocks_en, 0);
-+ info->rx_pm_enabled = 1;
-+ }
-+ else {
-+ mod_timer(&info->rx_pm_timer, jiffies + msecs_to_jiffies(PM_TIMEOUT));
-+ }
-+ spin_unlock_irqrestore(&info->lock, flags);
-+}
-+
-+/* Negotiation functions */
-+int hci_h4p_send_alive_packet(struct hci_h4p_info *info)
-+{
-+ NBT_DBG("Sending alive packet\n");
-+
-+ if (!info->alive_cmd_skb)
-+ return -EINVAL;
-+
-+ /* Keep reference to buffer so we can reuse it */
-+ info->alive_cmd_skb = skb_get(info->alive_cmd_skb);
-+
-+ skb_queue_tail(&info->txq, info->alive_cmd_skb);
-+ tasklet_schedule(&info->tx_task);
-+
-+ NBT_DBG("Alive packet sent\n");
-+
-+ return 0;
-+}
-+
-+static void hci_h4p_alive_packet(struct hci_h4p_info *info, struct sk_buff *skb)
-+{
-+ NBT_DBG("Received alive packet\n");
-+ if (skb->data[1] == 0xCC) {
-+ complete(&info->init_completion);
-+ }
-+
-+ kfree_skb(skb);
-+}
-+
-+static int hci_h4p_send_negotiation(struct hci_h4p_info *info, struct sk_buff *skb)
-+{
-+ NBT_DBG("Sending negotiation..\n");
-+
-+ hci_h4p_change_speed(info, INIT_SPEED);
-+
-+ info->init_error = 0;
-+ init_completion(&info->init_completion);
-+ skb_queue_tail(&info->txq, skb);
-+ tasklet_schedule(&info->tx_task);
-+
-+ if (!wait_for_completion_interruptible_timeout(&info->init_completion,
-+ msecs_to_jiffies(1000)))
-+ return -ETIMEDOUT;
-+
-+ NBT_DBG("Negotiation sent\n");
-+ return info->init_error;
-+}
-+
-+static void hci_h4p_negotiation_packet(struct hci_h4p_info *info,
-+ struct sk_buff *skb)
-+{
-+ int err = 0;
-+
-+ if (skb->data[1] == 0x20) {
-+ /* Change to operational settings */
-+ hci_h4p_set_rts(info, 0);
-+
-+ err = hci_h4p_wait_for_cts(info, 0, 100);
-+ if (err < 0)
-+ goto neg_ret;
-+
-+ hci_h4p_change_speed(info, MAX_BAUD_RATE);
-+
-+ err = hci_h4p_wait_for_cts(info, 1, 100);
-+ if (err < 0)
-+ goto neg_ret;
-+
-+ hci_h4p_set_auto_ctsrts(info, 1, UART_EFR_CTS | UART_EFR_RTS);
-+
-+ err = hci_h4p_send_alive_packet(info);
-+ if (err < 0)
-+ goto neg_ret;
-+ } else {
-+ dev_err(info->dev, "Could not negotiate hci_h4p settings\n");
-+ err = -EINVAL;
-+ goto neg_ret;
-+ }
-+
-+ kfree_skb(skb);
-+ return;
-+
-+neg_ret:
-+ info->init_error = err;
-+ complete(&info->init_completion);
-+ kfree_skb(skb);
-+}
-+
-+/* H4 packet handling functions */
-+static int hci_h4p_get_hdr_len(struct hci_h4p_info *info, u8 pkt_type)
-+{
-+ long retval;
-+
-+ switch (pkt_type) {
-+ case H4_EVT_PKT:
-+ retval = HCI_EVENT_HDR_SIZE;
-+ break;
-+ case H4_ACL_PKT:
-+ retval = HCI_ACL_HDR_SIZE;
-+ break;
-+ case H4_SCO_PKT:
-+ retval = HCI_SCO_HDR_SIZE;
-+ break;
-+ case H4_NEG_PKT:
-+ retval = 11;
-+ break;
-+ case H4_ALIVE_PKT:
-+ retval = 3;
-+ break;
-+ default:
-+ dev_err(info->dev, "Unknown H4 packet type 0x%.2x\n", pkt_type);
-+ retval = -1;
-+ break;
-+ }
-+
-+ return retval;
-+}
-+
-+static unsigned int hci_h4p_get_data_len(struct hci_h4p_info *info,
-+ struct sk_buff *skb)
-+{
-+ long retval = -1;
-+ struct hci_event_hdr *evt_hdr;
-+ struct hci_acl_hdr *acl_hdr;
-+ struct hci_sco_hdr *sco_hdr;
-+
-+ switch (bt_cb(skb)->pkt_type) {
-+ case H4_EVT_PKT:
-+ evt_hdr = (struct hci_event_hdr *)skb->data;
-+ retval = evt_hdr->plen;
-+ break;
-+ case H4_ACL_PKT:
-+ acl_hdr = (struct hci_acl_hdr *)skb->data;
-+ retval = le16_to_cpu(acl_hdr->dlen);
-+ break;
-+ case H4_SCO_PKT:
-+ sco_hdr = (struct hci_sco_hdr *)skb->data;
-+ retval = sco_hdr->dlen;
-+ break;
-+ case H4_NEG_PKT:
-+ retval = 0;
-+ break;
-+ case H4_ALIVE_PKT:
-+ retval = 0;
-+ break;
-+ }
-+
-+ return retval;
-+}
-+
-+static inline void hci_h4p_recv_frame(struct hci_h4p_info *info,
-+ struct sk_buff *skb)
-+{
-+
-+ if (unlikely(!test_bit(HCI_RUNNING, &info->hdev->flags))) {
-+ NBT_DBG("fw_event\n");
-+ hci_h4p_parse_fw_event(info, skb);
-+ } else {
-+ hci_recv_frame(skb);
-+ NBT_DBG("Frame sent to upper layer\n");
-+ }
-+}
-+
-+static void hci_h4p_rx_tasklet(unsigned long data)
-+{
-+ u8 byte;
-+ unsigned long flags;
-+ struct hci_h4p_info *info = (struct hci_h4p_info *)data;
-+
-+ NBT_DBG("tasklet woke up\n");
-+ NBT_DBG_TRANSFER("rx_tasklet woke up\ndata ");
-+
-+ while (hci_h4p_inb(info, UART_LSR) & UART_LSR_DR) {
-+ byte = hci_h4p_inb(info, UART_RX);
-+ if (info->garbage_bytes) {
-+ info->garbage_bytes--;
-+ continue;
-+ }
-+ if (info->rx_skb == NULL) {
-+ info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC | GFP_DMA);
-+ if (!info->rx_skb) {
-+ dev_err(info->dev, "Can't allocate memory for new packet\n");
-+ goto finish_task;
-+ }
-+ info->rx_state = WAIT_FOR_PKT_TYPE;
-+ info->rx_skb->dev = (void *)info->hdev;
-+ }
-+ info->hdev->stat.byte_rx++;
-+ NBT_DBG_TRANSFER_NF("0x%.2x ", byte);
-+ switch (info->rx_state) {
-+ case WAIT_FOR_PKT_TYPE:
-+ bt_cb(info->rx_skb)->pkt_type = byte;
-+ info->rx_count = hci_h4p_get_hdr_len(info, byte);
-+ if (info->rx_count < 0) {
-+ info->hdev->stat.err_rx++;
-+ kfree_skb(info->rx_skb);
-+ info->rx_skb = NULL;
-+ } else {
-+ info->rx_state = WAIT_FOR_HEADER;
-+ }
-+ break;
-+ case WAIT_FOR_HEADER:
-+ info->rx_count--;
-+ *skb_put(info->rx_skb, 1) = byte;
-+ if (info->rx_count == 0) {
-+ info->rx_count = hci_h4p_get_data_len(info, info->rx_skb);
-+ if (info->rx_count > skb_tailroom(info->rx_skb)) {
-+ dev_err(info->dev, "Frame is %ld bytes too long.\n",
-+ info->rx_count - skb_tailroom(info->rx_skb));
-+ kfree_skb(info->rx_skb);
-+ info->rx_skb = NULL;
-+ info->garbage_bytes = info->rx_count - skb_tailroom(info->rx_skb);
-+ break;
-+ }
-+ info->rx_state = WAIT_FOR_DATA;
-+
-+ if (bt_cb(info->rx_skb)->pkt_type == H4_NEG_PKT) {
-+ hci_h4p_negotiation_packet(info, info->rx_skb);
-+ info->rx_skb = NULL;
-+ info->rx_state = WAIT_FOR_PKT_TYPE;
-+ goto finish_task;
-+ }
-+ if (bt_cb(info->rx_skb)->pkt_type == H4_ALIVE_PKT) {
-+ hci_h4p_alive_packet(info, info->rx_skb);
-+ info->rx_skb = NULL;
-+ info->rx_state = WAIT_FOR_PKT_TYPE;
-+ goto finish_task;
-+ }
-+ }
-+ break;
-+ case WAIT_FOR_DATA:
-+ info->rx_count--;
-+ *skb_put(info->rx_skb, 1) = byte;
-+ if (info->rx_count == 0) {
-+ /* H4+ devices should allways send word aligned packets */
-+ if (!(info->rx_skb->len % 2)) {
-+ info->garbage_bytes++;
-+ }
-+ hci_h4p_recv_frame(info, info->rx_skb);
-+ info->rx_skb = NULL;
-+ }
-+ break;
-+ default:
-+ WARN_ON(1);
-+ break;
-+ }
-+ }
-+
-+finish_task:
-+ spin_lock_irqsave(&info->lock, flags);
-+ hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | UART_IER_RDI);
-+ spin_unlock_irqrestore(&info->lock, flags);
-+
-+ NBT_DBG_TRANSFER_NF("\n");
-+ NBT_DBG("rx_ended\n");
-+}
-+
-+static void hci_h4p_tx_tasklet(unsigned long data)
-+{
-+ unsigned int sent = 0;
-+ unsigned long flags;
-+ struct sk_buff *skb;
-+ struct hci_h4p_info *info = (struct hci_h4p_info *)data;
-+
-+ NBT_DBG("tasklet woke up\n");
-+ NBT_DBG_TRANSFER("tx_tasklet woke up\n data ");
-+
-+ skb = skb_dequeue(&info->txq);
-+ if (!skb) {
-+ /* No data in buffer */
-+ NBT_DBG("skb ready\n");
-+ hci_h4p_disable_tx(info);
-+ return;
-+ }
-+
-+ /* Copy data to tx fifo */
-+ while (!(hci_h4p_inb(info, UART_OMAP_SSR) & UART_OMAP_SSR_TXFULL) &&
-+ (sent < skb->len)) {
-+ NBT_DBG_TRANSFER_NF("0x%.2x ", skb->data[sent]);
-+ hci_h4p_outb(info, UART_TX, skb->data[sent]);
-+ sent++;
-+ }
-+
-+ info->hdev->stat.byte_tx += sent;
-+ NBT_DBG_TRANSFER_NF("\n");
-+ if (skb->len == sent) {
-+ kfree_skb(skb);
-+ } else {
-+ skb_pull(skb, sent);
-+ skb_queue_head(&info->txq, skb);
-+ }
-+
-+ spin_lock_irqsave(&info->lock, flags);
-+ hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) | UART_IER_THRI);
-+ spin_unlock_irqrestore(&info->lock, flags);
-+}
-+
-+static irqreturn_t hci_h4p_interrupt(int irq, void *data)
-+{
-+ struct hci_h4p_info *info = (struct hci_h4p_info *)data;
-+ u8 iir, msr;
-+ int ret;
-+ unsigned long flags;
-+
-+ ret = IRQ_NONE;
-+
-+ iir = hci_h4p_inb(info, UART_IIR);
-+ if (iir & UART_IIR_NO_INT) {
-+ dev_err(info->dev, "Interrupt but no reason irq 0x%.2x\n", iir);
-+ return IRQ_HANDLED;
-+ }
-+
-+ NBT_DBG("In interrupt handler iir 0x%.2x\n", iir);
-+
-+ iir &= UART_IIR_ID;
-+
-+ if (iir == UART_IIR_MSI) {
-+ msr = hci_h4p_inb(info, UART_MSR);
-+ ret = IRQ_HANDLED;
-+ }
-+ if (iir == UART_IIR_RLSI) {
-+ hci_h4p_inb(info, UART_RX);
-+ hci_h4p_inb(info, UART_LSR);
-+ ret = IRQ_HANDLED;
-+ }
-+
-+ if (iir == UART_IIR_RDI) {
-+ spin_lock_irqsave(&info->lock, flags);
-+ hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) & ~UART_IER_RDI);
-+ spin_unlock_irqrestore(&info->lock, flags);
-+ tasklet_schedule(&info->rx_task);
-+ ret = IRQ_HANDLED;
-+ }
-+
-+ if (iir == UART_IIR_THRI) {
-+ spin_lock_irqsave(&info->lock, flags);
-+ hci_h4p_outb(info, UART_IER, hci_h4p_inb(info, UART_IER) & ~UART_IER_THRI);
-+ spin_unlock_irqrestore(&info->lock, flags);
-+ tasklet_schedule(&info->tx_task);
-+ ret = IRQ_HANDLED;
-+ }
-+
-+ return ret;
-+}
-+
-+static irqreturn_t hci_h4p_wakeup_interrupt(int irq, void *dev_inst)
-+{
-+ struct hci_h4p_info *info = dev_inst;
-+ int should_wakeup;
-+ struct hci_dev *hdev;
-+
-+ if (!info->hdev)
-+ return IRQ_HANDLED;
-+
-+ hdev = info->hdev;
-+
-+ if (!test_bit(HCI_RUNNING, &hdev->flags))
-+ return IRQ_HANDLED;
-+
-+ should_wakeup = gpio_get_value(info->host_wakeup_gpio);
-+ NBT_DBG_POWER("gpio interrupt %d\n", should_wakeup);
-+ if (should_wakeup) {
-+ hci_h4p_enable_rx(info);
-+ } else {
-+ hci_h4p_disable_rx(info);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int hci_h4p_reset(struct hci_h4p_info *info)
-+{
-+ int err;
-+
-+ hci_h4p_init_uart(info);
-+ hci_h4p_set_rts(info, 0);
-+
-+ gpio_set_value(info->reset_gpio, 0);
-+ msleep(100);
-+ gpio_set_value(info->bt_wakeup_gpio, 1);
-+ gpio_set_value(info->reset_gpio, 1);
-+ msleep(100);
-+
-+ err = hci_h4p_wait_for_cts(info, 1, 10);
-+ if (err < 0) {
-+ dev_err(info->dev, "No cts from bt chip\n");
-+ return err;
-+ }
-+
-+ hci_h4p_set_rts(info, 1);
-+
-+ return 0;
-+}
-+
-+/* hci callback functions */
-+static int hci_h4p_hci_flush(struct hci_dev *hdev)
-+{
-+ struct hci_h4p_info *info;
-+ info = hdev->driver_data;
-+
-+ skb_queue_purge(&info->txq);
-+
-+ return 0;
-+}
-+
-+static int hci_h4p_hci_open(struct hci_dev *hdev)
-+{
-+ struct hci_h4p_info *info;
-+ int err;
-+ struct sk_buff *neg_cmd_skb;
-+ struct sk_buff_head fw_queue;
-+
-+ info = hdev->driver_data;
-+
-+ if (test_bit(HCI_RUNNING, &hdev->flags))
-+ return 0;
-+
-+ skb_queue_head_init(&fw_queue);
-+ err = hci_h4p_read_fw(info, &fw_queue);
-+ if (err < 0) {
-+ dev_err(info->dev, "Cannot read firmware\n");
-+ return err;
-+ }
-+ neg_cmd_skb = skb_dequeue(&fw_queue);
-+ if (!neg_cmd_skb) {
-+ err = -EPROTO;
-+ goto err_clean;
-+ }
-+ info->alive_cmd_skb = skb_dequeue(&fw_queue);
-+ if (!info->alive_cmd_skb) {
-+ err = -EPROTO;
-+ goto err_clean;
-+ }
-+
-+ hci_h4p_set_clk(info, &info->tx_clocks_en, 1);
-+ hci_h4p_set_clk(info, &info->rx_clocks_en, 1);
-+
-+ tasklet_enable(&info->tx_task);
-+ tasklet_enable(&info->rx_task);
-+ info->rx_state = WAIT_FOR_PKT_TYPE;
-+ info->rx_count = 0;
-+ info->garbage_bytes = 0;
-+ info->rx_skb = NULL;
-+ info->pm_enabled = 0;
-+ init_completion(&info->fw_completion);
-+
-+ err = hci_h4p_reset(info);
-+ if (err < 0)
-+ goto err_clean;
-+
-+ err = hci_h4p_send_negotiation(info, neg_cmd_skb);
-+ neg_cmd_skb = NULL;
-+ if (err < 0)
-+ goto err_clean;
-+
-+ err = hci_h4p_send_fw(info, &fw_queue);
-+ if (err < 0) {
-+ dev_err(info->dev, "Sending firmware failed.\n");
-+ goto err_clean;
-+ }
-+
-+ kfree_skb(info->alive_cmd_skb);
-+ info->alive_cmd_skb = NULL;
-+ info->pm_enabled = 1;
-+ info->tx_pm_enabled = 1;
-+ info->rx_pm_enabled = 0;
-+ set_bit(HCI_RUNNING, &hdev->flags);
-+
-+ NBT_DBG("hci up and running\n");
-+ return 0;
-+
-+err_clean:
-+ hci_h4p_hci_flush(hdev);
-+ tasklet_disable(&info->tx_task);
-+ tasklet_disable(&info->rx_task);
-+ hci_h4p_reset_uart(info);
-+ hci_h4p_set_clk(info, &info->tx_clocks_en, 0);
-+ hci_h4p_set_clk(info, &info->rx_clocks_en, 0);
-+ gpio_set_value(info->reset_gpio, 0);
-+ gpio_set_value(info->bt_wakeup_gpio, 0);
-+ skb_queue_purge(&fw_queue);
-+ kfree_skb(neg_cmd_skb);
-+ neg_cmd_skb = NULL;
-+ kfree_skb(info->alive_cmd_skb);
-+ info->alive_cmd_skb = NULL;
-+ kfree_skb(info->rx_skb);
-+
-+ return err;
-+}
-+
-+static int hci_h4p_hci_close(struct hci_dev *hdev)
-+{
-+ struct hci_h4p_info *info = hdev->driver_data;
-+
-+ if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
-+ return 0;
-+
-+ hci_h4p_hci_flush(hdev);
-+ del_timer_sync(&info->tx_pm_timer);
-+ del_timer_sync(&info->rx_pm_timer);
-+ tasklet_disable(&info->tx_task);
-+ tasklet_disable(&info->rx_task);
-+ hci_h4p_set_clk(info, &info->tx_clocks_en, 1);
-+ hci_h4p_set_clk(info, &info->rx_clocks_en, 1);
-+ hci_h4p_reset_uart(info);
-+ hci_h4p_set_clk(info, &info->tx_clocks_en, 0);
-+ hci_h4p_set_clk(info, &info->rx_clocks_en, 0);
-+ gpio_set_value(info->reset_gpio, 0);
-+ gpio_set_value(info->bt_wakeup_gpio, 0);
-+ kfree_skb(info->rx_skb);
-+
-+ return 0;
-+}
-+
-+static void hci_h4p_hci_destruct(struct hci_dev *hdev)
-+{
-+}
-+
-+static int hci_h4p_hci_send_frame(struct sk_buff *skb)
-+{
-+ struct hci_h4p_info *info;
-+ struct hci_dev *hdev = (struct hci_dev *)skb->dev;
-+ int err = 0;
-+
-+ if (!hdev) {
-+ printk(KERN_WARNING "hci_h4p: Frame for unknown device\n");
-+ return -ENODEV;
-+ }
-+
-+ NBT_DBG("dev %p, skb %p\n", hdev, skb);
-+
-+ info = hdev->driver_data;
-+
-+ if (!test_bit(HCI_RUNNING, &hdev->flags)) {
-+ dev_warn(info->dev, "Frame for non-running device\n");
-+ return -EIO;
-+ }
-+
-+ switch (bt_cb(skb)->pkt_type) {
-+ case HCI_COMMAND_PKT:
-+ hdev->stat.cmd_tx++;
-+ break;
-+ case HCI_ACLDATA_PKT:
-+ hdev->stat.acl_tx++;
-+ break;
-+ case HCI_SCODATA_PKT:
-+ hdev->stat.sco_tx++;
-+ break;
-+ }
-+
-+ /* Push frame type to skb */
-+ *skb_push(skb, 1) = (bt_cb(skb)->pkt_type);
-+ /* We should allways send word aligned data to h4+ devices */
-+ if (skb->len % 2) {
-+ err = skb_pad(skb, 1);
-+ }
-+ if (err)
-+ return err;
-+
-+ hci_h4p_enable_tx(info);
-+ skb_queue_tail(&info->txq, skb);
-+ tasklet_schedule(&info->tx_task);
-+
-+ return 0;
-+}
-+
-+static int hci_h4p_hci_ioctl(struct hci_dev *hdev, unsigned int cmd, unsigned long arg)
-+{
-+ return -ENOIOCTLCMD;
-+}
-+
-+static int hci_h4p_register_hdev(struct hci_h4p_info *info)
-+{
-+ struct hci_dev *hdev;
-+
-+ /* Initialize and register HCI device */
-+
-+ hdev = hci_alloc_dev();
-+ if (!hdev) {
-+ dev_err(info->dev, "Can't allocate memory for device\n");
-+ return -ENOMEM;
-+ }
-+ info->hdev = hdev;
-+
-+ hdev->dev_type = HCI_UART;
-+ hdev->driver_data = info;
-+
-+ hdev->open = hci_h4p_hci_open;
-+ hdev->close = hci_h4p_hci_close;
-+ hdev->flush = hci_h4p_hci_flush;
-+ hdev->send = hci_h4p_hci_send_frame;
-+ hdev->destruct = hci_h4p_hci_destruct;
-+ hdev->ioctl = hci_h4p_hci_ioctl;
-+
-+ hdev->owner = THIS_MODULE;
-+
-+ if (hci_register_dev(hdev) < 0) {
-+ dev_err(info->dev, "hci_h4p: Can't register HCI device %s.\n", hdev->name);
-+ return -ENODEV;
-+ }
-+
-+ return 0;
-+}
-+
-+static int hci_h4p_probe(struct platform_device *pdev)
-+{
-+ struct omap_bluetooth_config *bt_config;
-+ struct hci_h4p_info *info;
-+ int irq, err;
-+
-+ dev_info(&pdev->dev, "Registering HCI H4P device\n");
-+ info = kzalloc(sizeof(struct hci_h4p_info), GFP_KERNEL);
-+ if (!info)
-+ return -ENOMEM;
-+
-+ info->dev = &pdev->dev;
-+ info->pm_enabled = 0;
-+ info->tx_pm_enabled = 0;
-+ info->rx_pm_enabled = 0;
-+ info->garbage_bytes = 0;
-+ info->tx_clocks_en = 0;
-+ info->rx_clocks_en = 0;
-+ tasklet_init(&info->tx_task, hci_h4p_tx_tasklet, (unsigned long)info);
-+ tasklet_init(&info->rx_task, hci_h4p_rx_tasklet, (unsigned long)info);
-+ /* hci_h4p_hci_open assumes that tasklet is disabled in startup */
-+ tasklet_disable(&info->tx_task);
-+ tasklet_disable(&info->rx_task);
-+ spin_lock_init(&info->lock);
-+ spin_lock_init(&info->clocks_lock);
-+ skb_queue_head_init(&info->txq);
-+ init_timer(&info->tx_pm_timer);
-+ info->tx_pm_timer.function = hci_h4p_tx_pm_timer;
-+ info->tx_pm_timer.data = (unsigned long)info;
-+ init_timer(&info->rx_pm_timer);
-+ info->rx_pm_timer.function = hci_h4p_rx_pm_timer;
-+ info->rx_pm_timer.data = (unsigned long)info;
-+
-+ if (pdev->dev.platform_data == NULL) {
-+ dev_err(&pdev->dev, "Could not get Bluetooth config data\n");
-+ return -ENODATA;
-+ }
-+
-+ bt_config = pdev->dev.platform_data;
-+ info->chip_type = bt_config->chip_type;
-+ info->bt_wakeup_gpio = bt_config->bt_wakeup_gpio;
-+ info->host_wakeup_gpio = bt_config->host_wakeup_gpio;
-+ info->reset_gpio = bt_config->reset_gpio;
-+ info->bt_sysclk = bt_config->bt_sysclk;
-+
-+ NBT_DBG("RESET gpio: %d\n", info->reset_gpio);
-+ NBT_DBG("BTWU gpio: %d\n", info->bt_wakeup_gpio);
-+ NBT_DBG("HOSTWU gpio: %d\n", info->host_wakeup_gpio);
-+ NBT_DBG("Uart: %d\n", bt_config->bt_uart);
-+ NBT_DBG("sysclk: %d\n", info->bt_sysclk);
-+
-+ err = gpio_request(info->reset_gpio, "BT reset");
-+ if (err < 0) {
-+ dev_err(&pdev->dev, "Cannot get GPIO line %d\n",
-+ info->reset_gpio);
-+ kfree(info);
-+ goto cleanup;
-+ }
-+
-+ err = gpio_request(info->bt_wakeup_gpio, "BT wakeup");
-+ if (err < 0)
-+ {
-+ dev_err(info->dev, "Cannot get GPIO line 0x%d",
-+ info->bt_wakeup_gpio);
-+ gpio_free(info->reset_gpio);
-+ kfree(info);
-+ goto cleanup;
-+ }
-+
-+ err = gpio_request(info->host_wakeup_gpio, "BT host wakeup");
-+ if (err < 0)
-+ {
-+ dev_err(info->dev, "Cannot get GPIO line %d",
-+ info->host_wakeup_gpio);
-+ gpio_free(info->reset_gpio);
-+ gpio_free(info->bt_wakeup_gpio);
-+ kfree(info);
-+ goto cleanup;
-+ }
-+
-+ gpio_direction_output(info->reset_gpio, 0);
-+ gpio_direction_output(info->bt_wakeup_gpio, 0);
-+ gpio_direction_input(info->host_wakeup_gpio);
-+
-+//FIXME
-+#if defined(CONFIG_ARCH_OMAP1)
-+# define OMAP_UART1_BASE OMAP1_UART1_BASE
-+# define OMAP_UART2_BASE OMAP1_UART2_BASE
-+# define OMAP_UART3_BASE OMAP1_UART3_BASE
-+#elif defined(CONFIG_ARCH_OMAP2)
-+# define OMAP_UART1_BASE OMAP2_UART1_BASE
-+# define OMAP_UART2_BASE OMAP2_UART2_BASE
-+# define OMAP_UART3_BASE OMAP2_UART3_BASE
-+#elif defined(CONFIG_ARCH_OMAP3)
-+# define OMAP_UART1_BASE OMAP3_UART1_BASE
-+# define OMAP_UART2_BASE OMAP3_UART2_BASE
-+# define OMAP_UART3_BASE OMAP3_UART3_BASE
-+#elif defined(CONFIG_ARCH_OMAP4)
-+# define OMAP_UART1_BASE OMAP4_UART1_BASE
-+# define OMAP_UART2_BASE OMAP4_UART2_BASE
-+# define OMAP_UART3_BASE OMAP4_UART3_BASE
-+#else
-+# error
-+#endif
-+ switch (bt_config->bt_uart) {
-+ case 1:
-+ if (cpu_is_omap16xx()) {
-+ irq = INT_UART1;
-+ info->uart_fclk = clk_get(NULL, "uart1_ck");
-+ } else if (cpu_is_omap24xx()) {
-+ irq = INT_24XX_UART1_IRQ;
-+ info->uart_iclk = clk_get(NULL, "uart1_ick");
-+ info->uart_fclk = clk_get(NULL, "uart1_fck");
-+ }
-+ /* FIXME: Use platform_get_resource for the port */
-+ info->uart_base = ioremap(OMAP_UART1_BASE, 0x16);
-+ if (!info->uart_base)
-+ goto cleanup;
-+ break;
-+ case 2:
-+ if (cpu_is_omap16xx()) {
-+ irq = INT_UART2;
-+ info->uart_fclk = clk_get(NULL, "uart2_ck");
-+ } else {
-+ irq = INT_24XX_UART2_IRQ;
-+ info->uart_iclk = clk_get(NULL, "uart2_ick");
-+ info->uart_fclk = clk_get(NULL, "uart2_fck");
-+ }
-+ /* FIXME: Use platform_get_resource for the port */
-+ info->uart_base = ioremap(OMAP_UART2_BASE, 0x16);
-+ if (!info->uart_base)
-+ goto cleanup;
-+ break;
-+ case 3:
-+ if (cpu_is_omap16xx()) {
-+ irq = INT_UART3;
-+ info->uart_fclk = clk_get(NULL, "uart3_ck");
-+ } else {
-+ irq = INT_24XX_UART3_IRQ;
-+ info->uart_iclk = clk_get(NULL, "uart3_ick");
-+ info->uart_fclk = clk_get(NULL, "uart3_fck");
-+ }
-+ /* FIXME: Use platform_get_resource for the port */
-+ info->uart_base = ioremap(OMAP_UART3_BASE, 0x16);
-+ if (!info->uart_base)
-+ goto cleanup;
-+ break;
-+ default:
-+ dev_err(info->dev, "No uart defined\n");
-+ goto cleanup;
-+ }
-+
-+ info->irq = irq;
-+ err = request_irq(irq, hci_h4p_interrupt, 0, "hci_h4p", (void *)info);
-+ if (err < 0) {
-+ dev_err(info->dev, "hci_h4p: unable to get IRQ %d\n", irq);
-+ goto cleanup;
-+ }
-+
-+ err = request_irq(gpio_to_irq(info->host_wakeup_gpio),
-+ hci_h4p_wakeup_interrupt,
-+ IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-+ "hci_h4p_wkup", (void *)info);
-+ if (err < 0) {
-+ dev_err(info->dev, "hci_h4p: unable to get wakeup IRQ %d\n",
-+ gpio_to_irq(info->host_wakeup_gpio));
-+ free_irq(irq, (void *)info);
-+ goto cleanup;
-+ }
-+
-+ hci_h4p_set_clk(info, &info->tx_clocks_en, 1);
-+ hci_h4p_set_auto_ctsrts(info, 0, UART_EFR_CTS | UART_EFR_RTS);
-+ err = hci_h4p_init_uart(info);
-+ if (err < 0)
-+ goto cleanup_irq;
-+ err = hci_h4p_reset(info);
-+ if (err < 0)
-+ goto cleanup_irq;
-+ err = hci_h4p_wait_for_cts(info, 1, 10);
-+ if (err < 0)
-+ goto cleanup_irq;
-+ hci_h4p_set_clk(info, &info->tx_clocks_en, 0);
-+
-+ platform_set_drvdata(pdev, info);
-+ err = hci_h4p_sysfs_create_files(info->dev);
-+ if (err < 0)
-+ goto cleanup_irq;
-+
-+ if (hci_h4p_register_hdev(info) < 0) {
-+ dev_err(info->dev, "failed to register hci_h4p hci device\n");
-+ goto cleanup_irq;
-+ }
-+ gpio_set_value(info->reset_gpio, 0);
-+
-+ return 0;
-+
-+cleanup_irq:
-+ free_irq(irq, (void *)info);
-+ free_irq(gpio_to_irq(info->host_wakeup_gpio), (void *)info);
-+cleanup:
-+ gpio_set_value(info->reset_gpio, 0);
-+ gpio_free(info->reset_gpio);
-+ gpio_free(info->bt_wakeup_gpio);
-+ gpio_free(info->host_wakeup_gpio);
-+ kfree(info);
-+
-+ return err;
-+
-+}
-+
-+static int hci_h4p_remove(struct platform_device *dev)
-+{
-+ struct hci_h4p_info *info;
-+
-+ info = platform_get_drvdata(dev);
-+
-+ hci_h4p_hci_close(info->hdev);
-+ free_irq(gpio_to_irq(info->host_wakeup_gpio), (void *) info);
-+ hci_free_dev(info->hdev);
-+ gpio_free(info->reset_gpio);
-+ gpio_free(info->bt_wakeup_gpio);
-+ gpio_free(info->host_wakeup_gpio);
-+ free_irq(info->irq, (void *) info);
-+ kfree(info);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver hci_h4p_driver = {
-+ .probe = hci_h4p_probe,
-+ .remove = hci_h4p_remove,
-+ .driver = {
-+ .name = "hci_h4p",
-+ },
-+};
-+
-+static int __init hci_h4p_init(void)
-+{
-+ int err = 0;
-+
-+ /* Register the driver with LDM */
-+ err = platform_driver_register(&hci_h4p_driver);
-+ if (err < 0)
-+ printk(KERN_WARNING "failed to register hci_h4p driver\n");
-+
-+ return err;
-+}
-+
-+static void __exit hci_h4p_exit(void)
-+{
-+ platform_driver_unregister(&hci_h4p_driver);
-+}
-+
-+module_init(hci_h4p_init);
-+module_exit(hci_h4p_exit);
-+
-+MODULE_DESCRIPTION("h4 driver with nokia extensions");
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Ville Tervo");
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/fw.c
-@@ -0,0 +1,155 @@
-+/*
-+ * This file is part of hci_h4p bluetooth driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation.
-+ *
-+ * Contact: Ville Tervo <ville.tervo@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/skbuff.h>
-+#include <linux/firmware.h>
-+#include <linux/clk.h>
-+
-+#include <net/bluetooth/bluetooth.h>
-+
-+#include "hci_h4p.h"
-+
-+#define BT_CHIP_TI 2
-+#define BT_CHIP_CSR 1
-+
-+static int fw_pos;
-+
-+/* Firmware handling */
-+static int hci_h4p_open_firmware(struct hci_h4p_info *info,
-+ const struct firmware **fw_entry)
-+{
-+ int err;
-+
-+ fw_pos = 0;
-+ NBT_DBG_FW("Opening %d firmware\n", info->chip_type);
-+ switch (info->chip_type) {
-+ case BT_CHIP_TI:
-+ err = request_firmware(fw_entry, "brf6150fw.bin", info->dev);
-+ break;
-+ case BT_CHIP_CSR:
-+ err = request_firmware(fw_entry, "bc4fw.bin", info->dev);
-+ break;
-+ default:
-+ dev_err(info->dev, "Invalid chip type\n");
-+ *fw_entry = NULL;
-+ err = -EINVAL;
-+ }
-+
-+ return err;
-+}
-+
-+static void hci_h4p_close_firmware(const struct firmware *fw_entry)
-+{
-+ release_firmware(fw_entry);
-+}
-+
-+/* Read fw. Return length of the command. If no more commands in
-+ * fw 0 is returned. In error case return value is negative.
-+ */
-+static int hci_h4p_read_fw_cmd(struct hci_h4p_info *info, struct sk_buff **skb,
-+ const struct firmware *fw_entry, int how)
-+{
-+ unsigned int cmd_len;
-+
-+ if (fw_pos >= fw_entry->size) {
-+ return 0;
-+ }
-+
-+ cmd_len = fw_entry->data[fw_pos++];
-+ if (!cmd_len)
-+ return 0;
-+
-+ if (fw_pos + cmd_len > fw_entry->size) {
-+ dev_err(info->dev, "Corrupted firmware image\n");
-+ return -EMSGSIZE;
-+ }
-+
-+ *skb = bt_skb_alloc(cmd_len, how);
-+ if (!*skb) {
-+ dev_err(info->dev, "Cannot reserve memory for buffer\n");
-+ return -ENOMEM;
-+ }
-+ memcpy(skb_put(*skb, cmd_len), &fw_entry->data[fw_pos], cmd_len);
-+
-+ fw_pos += cmd_len;
-+
-+ return (*skb)->len;
-+}
-+
-+int hci_h4p_read_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue)
-+{
-+ const struct firmware *fw_entry = NULL;
-+ struct sk_buff *skb = NULL;
-+ int err;
-+
-+ err = hci_h4p_open_firmware(info, &fw_entry);
-+ if (err < 0 || !fw_entry)
-+ goto err_clean;
-+
-+ while ((err = hci_h4p_read_fw_cmd(info, &skb, fw_entry, GFP_KERNEL))) {
-+ if (err < 0 || !skb)
-+ goto err_clean;
-+
-+ skb_queue_tail(fw_queue, skb);
-+ }
-+
-+err_clean:
-+ hci_h4p_close_firmware(fw_entry);
-+ return err;
-+}
-+
-+int hci_h4p_send_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue)
-+{
-+ int err;
-+
-+ switch(info->chip_type) {
-+ case BT_CHIP_CSR:
-+ err = hci_h4p_bc4_send_fw(info, fw_queue);
-+ break;
-+ case BT_CHIP_TI:
-+ err = hci_h4p_brf6150_send_fw(info, fw_queue);
-+ break;
-+ default:
-+ dev_err(info->dev, "Don't know how to send firmware\n");
-+ err = -EINVAL;
-+ }
-+
-+ return err;
-+}
-+
-+void hci_h4p_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb)
-+{
-+ switch (info->chip_type) {
-+ case BT_CHIP_CSR:
-+ hci_h4p_bc4_parse_fw_event(info, skb);
-+ break;
-+ case BT_CHIP_TI:
-+ hci_h4p_brf6150_parse_fw_event(info, skb);
-+ break;
-+ default:
-+ dev_err(info->dev, "Don't know how to parse fw event\n");
-+ info->fw_error = -EINVAL;
-+ }
-+
-+ return;
-+}
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/fw-csr.c
-@@ -0,0 +1,149 @@
-+/*
-+ * This file is part of hci_h4p bluetooth driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation.
-+ *
-+ * Contact: Ville Tervo <ville.tervo@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/skbuff.h>
-+#include <linux/delay.h>
-+#include <linux/serial_reg.h>
-+
-+#include "hci_h4p.h"
-+
-+void hci_h4p_bc4_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb)
-+{
-+ /* Check if this is fw packet */
-+ if (skb->data[0] != 0xff) {
-+ hci_recv_frame(skb);
-+ return;
-+ }
-+
-+ if (skb->data[11] || skb->data[12]) {
-+ dev_err(info->dev, "Firmware sending command failed\n");
-+ info->fw_error = -EPROTO;
-+ }
-+
-+ kfree_skb(skb);
-+ complete(&info->fw_completion);
-+}
-+
-+int hci_h4p_bc4_send_fw(struct hci_h4p_info *info,
-+ struct sk_buff_head *fw_queue)
-+{
-+ struct sk_buff *skb;
-+ unsigned int offset;
-+ int retries, count, i;
-+
-+ info->fw_error = 0;
-+
-+ NBT_DBG_FW("Sending firmware\n");
-+ skb = skb_dequeue(fw_queue);
-+
-+ if (!skb)
-+ return -ENOMSG;
-+
-+ info->bdaddr[0] = 0x00;
-+ info->bdaddr[1] = 0x1D;
-+ info->bdaddr[2] = 0x6E;
-+ info->bdaddr[3] = 0xD4;
-+ info->bdaddr[4] = 0xF0;
-+ info->bdaddr[5] = 0x37;
-+
-+ /* Check if this is bd_address packet */
-+ if (skb->data[15] == 0x01 && skb->data[16] == 0x00) {
-+ dev_info(info->dev, "bd_address packet found\n");
-+ offset = 21;
-+ skb->data[offset + 1] = 0x00;
-+ skb->data[offset + 5] = 0x00;
-+ skb->data[offset + 7] = info->bdaddr[0];
-+ skb->data[offset + 6] = info->bdaddr[1];
-+ skb->data[offset + 4] = info->bdaddr[2];
-+ skb->data[offset + 0] = info->bdaddr[3];
-+ skb->data[offset + 3] = info->bdaddr[4];
-+ skb->data[offset + 2] = info->bdaddr[5];
-+ }
-+
-+ for (i = 0; i < 6; i++) {
-+ if (info->bdaddr[i] != 0x00)
-+ break;
-+ }
-+
-+ /* if (i > 5) {
-+ dev_info(info->dev, "Valid bluetooth address not found.\n");
-+ kfree_skb(skb);
-+ return -ENODEV;
-+ } */
-+
-+ for (count = 1; ; count++) {
-+ NBT_DBG_FW("Sending firmware command %d\n", count);
-+ init_completion(&info->fw_completion);
-+ skb_queue_tail(&info->txq, skb);
-+ tasklet_schedule(&info->tx_task);
-+
-+ skb = skb_dequeue(fw_queue);
-+ if (!skb)
-+ break;
-+
-+ if (!wait_for_completion_timeout(&info->fw_completion,
-+ msecs_to_jiffies(1000))) {
-+ dev_err(info->dev, "No reply to fw command\n");
-+ return -ETIMEDOUT;
-+ }
-+
-+ if (info->fw_error) {
-+ dev_err(info->dev, "FW error\n");
-+ return -EPROTO;
-+ }
-+ };
-+
-+ /* Wait for chip warm reset */
-+ retries = 100;
-+ while ((!skb_queue_empty(&info->txq) ||
-+ !(hci_h4p_inb(info, UART_LSR) & UART_LSR_TEMT)) &&
-+ retries--) {
-+ msleep(10);
-+ }
-+ if (!retries) {
-+ dev_err(info->dev, "Transmitter not empty\n");
-+ return -ETIMEDOUT;
-+ }
-+
-+ hci_h4p_change_speed(info, BC4_MAX_BAUD_RATE);
-+
-+ if (hci_h4p_wait_for_cts(info, 1, 100)) {
-+ dev_err(info->dev, "cts didn't go down after final speed change\n");
-+ return -ETIMEDOUT;
-+ }
-+
-+ retries = 100;
-+ do {
-+ init_completion(&info->init_completion);
-+ hci_h4p_send_alive_packet(info);
-+ retries--;
-+ } while (!wait_for_completion_timeout(&info->init_completion, 100) &&
-+ retries > 0);
-+
-+ if (!retries) {
-+ dev_err(info->dev, "No alive reply after speed change\n");
-+ return -ETIMEDOUT;
-+ }
-+
-+ return 0;
-+}
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/fw-ti.c
-@@ -0,0 +1,90 @@
-+/*
-+ * This file is part of hci_h4p bluetooth driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation.
-+ *
-+ * Contact: Ville Tervo <ville.tervo@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/skbuff.h>
-+
-+#include "hci_h4p.h"
-+
-+void hci_h4p_brf6150_parse_fw_event(struct hci_h4p_info *info,
-+ struct sk_buff *skb)
-+{
-+ struct hci_fw_event *ev;
-+ int err = 0;
-+
-+ if (bt_cb(skb)->pkt_type != H4_EVT_PKT) {
-+ dev_err(info->dev, "Got non event fw packet.\n");
-+ err = -EPROTO;
-+ goto ret;
-+ }
-+
-+ ev = (struct hci_fw_event *)skb->data;
-+ if (ev->hev.evt != HCI_EV_CMD_COMPLETE) {
-+ dev_err(info->dev, "Got non cmd complete fw event\n");
-+ err = -EPROTO;
-+ goto ret;
-+ }
-+
-+ if (ev->status != 0) {
-+ dev_err(info->dev, "Got error status from fw command\n");
-+ err = -EPROTO;
-+ goto ret;
-+ }
-+
-+ret:
-+ info->fw_error = err;
-+ complete(&info->fw_completion);
-+}
-+
-+int hci_h4p_brf6150_send_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue)
-+{
-+ struct sk_buff *skb;
-+ int err = 0;
-+
-+ info->fw_error = 0;
-+
-+ while ((skb = skb_dequeue(fw_queue)) != NULL) {
-+ /* We should allways send word aligned data to h4+ devices */
-+ if (skb->len % 2) {
-+ err = skb_pad(skb, 1);
-+ }
-+ if (err)
-+ return err;
-+
-+ init_completion(&info->fw_completion);
-+ skb_queue_tail(&info->txq, skb);
-+ tasklet_schedule(&info->tx_task);
-+
-+ if (!wait_for_completion_timeout(&info->fw_completion, HZ)) {
-+ dev_err(info->dev, "Timeout while sending brf6150 fw\n");
-+ return -ETIMEDOUT;
-+ }
-+
-+ if (info->fw_error) {
-+ dev_err(info->dev, "There was fw_error while sending bfr6150 fw\n");
-+ return -EPROTO;
-+ }
-+ }
-+ NBT_DBG_FW("Firmware sent\n");
-+
-+ return 0;
-+}
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/hci_h4p.h
-@@ -0,0 +1,183 @@
-+/*
-+ * This file is part of hci_h4p bluetooth driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation.
-+ *
-+ * Contact: Ville Tervo <ville.tervo@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <mach/board.h>
-+
-+#include <net/bluetooth/bluetooth.h>
-+#include <net/bluetooth/hci_core.h>
-+#include <net/bluetooth/hci.h>
-+
-+#ifndef __DRIVERS_BLUETOOTH_HCI_H4P_H
-+#define __DRIVERS_BLUETOOTH_HCI_H4P_H
-+
-+#define UART_SYSC_OMAP_RESET 0x03
-+#define UART_SYSS_RESETDONE 0x01
-+#define UART_OMAP_SCR_EMPTY_THR 0x08
-+#define UART_OMAP_SCR_WAKEUP 0x10
-+#define UART_OMAP_SSR_WAKEUP 0x02
-+#define UART_OMAP_SSR_TXFULL 0x01
-+
-+#if 0
-+#define NBT_DBG(fmt, arg...) printk("%s: " fmt "" , __FUNCTION__ , ## arg)
-+#else
-+#define NBT_DBG(...)
-+#endif
-+
-+#if 0
-+#define NBT_DBG_FW(fmt, arg...) printk("%s: " fmt "" , __FUNCTION__ , ## arg)
-+#else
-+#define NBT_DBG_FW(...)
-+#endif
-+
-+#if 0
-+#define NBT_DBG_POWER(fmt, arg...) printk("%s: " fmt "" , __FUNCTION__ , ## arg)
-+#else
-+#define NBT_DBG_POWER(...)
-+#endif
-+
-+#if 0
-+#define NBT_DBG_TRANSFER(fmt, arg...) printk("%s: " fmt "" , __FUNCTION__ , ## arg)
-+#else
-+#define NBT_DBG_TRANSFER(...)
-+#endif
-+
-+#if 0
-+#define NBT_DBG_TRANSFER_NF(fmt, arg...) printk(fmt "" , ## arg)
-+#else
-+#define NBT_DBG_TRANSFER_NF(...)
-+#endif
-+
-+#if 0
-+#define NBT_DBG_DMA(fmt, arg...) printk("%s: " fmt "" , __FUNCTION__ , ## arg)
-+#else
-+#define NBT_DBG_DMA(...)
-+#endif
-+
-+struct hci_h4p_info {
-+ struct hci_dev *hdev;
-+ spinlock_t lock;
-+
-+ void __iomem *uart_base;
-+ unsigned long uart_phys_base;
-+ int irq;
-+ struct device *dev;
-+ u8 bdaddr[6];
-+ u8 chip_type;
-+ u8 bt_wakeup_gpio;
-+ u8 host_wakeup_gpio;
-+ u8 reset_gpio;
-+ u8 bt_sysclk;
-+
-+
-+ struct sk_buff_head fw_queue;
-+ struct sk_buff *alive_cmd_skb;
-+ struct completion init_completion;
-+ struct completion fw_completion;
-+ int fw_error;
-+ int init_error;
-+
-+ struct sk_buff_head txq;
-+ struct tasklet_struct tx_task;
-+
-+ struct sk_buff *rx_skb;
-+ long rx_count;
-+ unsigned long rx_state;
-+ unsigned long garbage_bytes;
-+ struct tasklet_struct rx_task;
-+
-+ int pm_enabled;
-+ int tx_pm_enabled;
-+ int rx_pm_enabled;
-+ struct timer_list tx_pm_timer;
-+ struct timer_list rx_pm_timer;
-+
-+ int tx_clocks_en;
-+ int rx_clocks_en;
-+ spinlock_t clocks_lock;
-+ struct clk *uart_iclk;
-+ struct clk *uart_fclk;
-+};
-+
-+#define MAX_BAUD_RATE 921600
-+#define BC4_MAX_BAUD_RATE 3692300
-+#define UART_CLOCK 48000000
-+#define BT_INIT_DIVIDER 320
-+#define BT_BAUDRATE_DIVIDER 384000000
-+#define BT_SYSCLK_DIV 1000
-+#define INIT_SPEED 120000
-+
-+#define H4_TYPE_SIZE 1
-+
-+/* H4+ packet types */
-+#define H4_CMD_PKT 0x01
-+#define H4_ACL_PKT 0x02
-+#define H4_SCO_PKT 0x03
-+#define H4_EVT_PKT 0x04
-+#define H4_NEG_PKT 0x06
-+#define H4_ALIVE_PKT 0x07
-+
-+/* TX states */
-+#define WAIT_FOR_PKT_TYPE 1
-+#define WAIT_FOR_HEADER 2
-+#define WAIT_FOR_DATA 3
-+
-+struct hci_fw_event {
-+ struct hci_event_hdr hev;
-+ struct hci_ev_cmd_complete cmd;
-+ u8 status;
-+} __attribute__ ((packed));
-+
-+struct hci_bc4_set_bdaddr {
-+ u8 type;
-+ struct hci_command_hdr cmd_hdr;
-+} __attribute__ ((packed));
-+
-+int hci_h4p_send_alive_packet(struct hci_h4p_info *info);
-+
-+void hci_h4p_bc4_parse_fw_event(struct hci_h4p_info *info,
-+ struct sk_buff *skb);
-+int hci_h4p_bc4_send_fw(struct hci_h4p_info *info,
-+ struct sk_buff_head *fw_queue);
-+
-+void hci_h4p_brf6150_parse_fw_event(struct hci_h4p_info *info,
-+ struct sk_buff *skb);
-+int hci_h4p_brf6150_send_fw(struct hci_h4p_info *info,
-+ struct sk_buff_head *fw_queue);
-+
-+int hci_h4p_read_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue);
-+int hci_h4p_send_fw(struct hci_h4p_info *info, struct sk_buff_head *fw_queue);
-+void hci_h4p_parse_fw_event(struct hci_h4p_info *info, struct sk_buff *skb);
-+
-+int hci_h4p_sysfs_create_files(struct device *dev);
-+
-+void hci_h4p_outb(struct hci_h4p_info *info, unsigned int offset, u8 val);
-+u8 hci_h4p_inb(struct hci_h4p_info *info, unsigned int offset);
-+void hci_h4p_set_rts(struct hci_h4p_info *info, int active);
-+int hci_h4p_wait_for_cts(struct hci_h4p_info *info, int active, int timeout_ms);
-+void __hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which);
-+void hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which);
-+void hci_h4p_change_speed(struct hci_h4p_info *info, unsigned long speed);
-+int hci_h4p_reset_uart(struct hci_h4p_info *info);
-+int hci_h4p_init_uart(struct hci_h4p_info *info);
-+
-+#endif /* __DRIVERS_BLUETOOTH_HCI_H4P_H */
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/Makefile
-@@ -0,0 +1,7 @@
-+#
-+# Makefile for the Linux Bluetooth HCI device drivers.
-+#
-+
-+obj-$(CONFIG_BT_HCIH4P) += hci_h4p.o
-+
-+hci_h4p-objs := core.o fw.o uart.o sysfs.o fw-ti.o fw-csr.o
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/sysfs.c
-@@ -0,0 +1,84 @@
-+/*
-+ * This file is part of hci_h4p bluetooth driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation.
-+ *
-+ * Contact: Ville Tervo <ville.tervo@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+
-+#include "hci_h4p.h"
-+
-+#ifdef CONFIG_SYSFS
-+
-+static ssize_t hci_h4p_store_bdaddr(struct device *dev, struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ struct hci_h4p_info *info = (struct hci_h4p_info*)dev_get_drvdata(dev);
-+ unsigned int bdaddr[6];
-+ int ret, i;
-+
-+ dev_info(info->dev, "HCI_H4P_STORE_BDADDR called\n");
-+
-+ ret = sscanf(buf, "%2x:%2x:%2x:%2x:%2x:%2x\n",
-+ &bdaddr[0], &bdaddr[1], &bdaddr[2],
-+ &bdaddr[3], &bdaddr[4], &bdaddr[5]);
-+
-+ if (ret != 6) {
-+ dev_info(info->dev, "bdaddr isn't found\n");
-+ return -EINVAL;
-+ }
-+
-+ //for (i = 0; i < 6; i++)
-+ //info->bdaddr[i] = bdaddr[i] & 0xff;
-+
-+ info->bdaddr[0] = 0x00;
-+ info->bdaddr[1] = 0x1D;
-+ info->bdaddr[2] = 0x6E;
-+ info->bdaddr[3] = 0xD4;
-+ info->bdaddr[4] = 0xF0;
-+ info->bdaddr[5] = 0x37;
-+
-+ return count;
-+}
-+
-+static ssize_t hci_h4p_show_bdaddr(struct device *dev, struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct hci_h4p_info *info = (struct hci_h4p_info*)dev_get_drvdata(dev);
-+
-+ return sprintf(buf, "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-+ info->bdaddr[0],
-+ info->bdaddr[1],
-+ info->bdaddr[2],
-+ info->bdaddr[3],
-+ info->bdaddr[4],
-+ info->bdaddr[5]);
-+}
-+
-+static DEVICE_ATTR(bdaddr, S_IRUGO | S_IWUSR, hci_h4p_show_bdaddr, hci_h4p_store_bdaddr);
-+int hci_h4p_sysfs_create_files(struct device *dev)
-+{
-+ return device_create_file(dev, &dev_attr_bdaddr);
-+}
-+
-+#endif
---- /dev/null
-+++ b/drivers/bluetooth/hci_h4p/uart.c
-@@ -0,0 +1,169 @@
-+/*
-+ * This file is part of hci_h4p bluetooth driver
-+ *
-+ * Copyright (C) 2005, 2006 Nokia Corporation.
-+ *
-+ * Contact: Ville Tervo <ville.tervo@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/serial_reg.h>
-+#include <linux/delay.h>
-+#include <linux/clk.h>
-+
-+#include <asm/io.h>
-+
-+#include "hci_h4p.h"
-+
-+inline void hci_h4p_outb(struct hci_h4p_info *info, unsigned int offset, u8 val)
-+{
-+ offset <<= 2;
-+ __raw_writeb(val, info->uart_base + offset);
-+ //outb(val, info->uart_base + (offset << 2));
-+}
-+
-+inline u8 hci_h4p_inb(struct hci_h4p_info *info, unsigned int offset)
-+{
-+ offset <<= 2;
-+ return (u8)__raw_readb(info->uart_base + offset);
-+ //return (unsigned int)__raw_readb(up->membase + offset);
-+ //return inb(info->uart_base + (offset << 2));
-+}
-+
-+void hci_h4p_set_rts(struct hci_h4p_info *info, int active)
-+{
-+ u8 b;
-+
-+ b = hci_h4p_inb(info, UART_MCR);
-+ if (active)
-+ b |= UART_MCR_RTS;
-+ else
-+ b &= ~UART_MCR_RTS;
-+ hci_h4p_outb(info, UART_MCR, b);
-+}
-+
-+int hci_h4p_wait_for_cts(struct hci_h4p_info *info, int active,
-+ int timeout_ms)
-+{
-+ int okay;
-+ unsigned long timeout;
-+
-+ okay = 0;
-+ timeout = jiffies + msecs_to_jiffies(timeout_ms);
-+ for (;;) {
-+ int state;
-+
-+ state = hci_h4p_inb(info, UART_MSR) & UART_MSR_CTS;
-+ if (active) {
-+ if (state)
-+ return 0;
-+ } else {
-+ if (!state)
-+ return 0;
-+ }
-+ if (time_after(jiffies, timeout))
-+ return -ETIMEDOUT;
-+ }
-+}
-+
-+void __hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which)
-+{
-+ u8 lcr, b;
-+
-+ lcr = hci_h4p_inb(info, UART_LCR);
-+ hci_h4p_outb(info, UART_LCR, 0xbf);
-+ b = hci_h4p_inb(info, UART_EFR);
-+ if (on)
-+ b |= which;
-+ else
-+ b &= ~which;
-+ hci_h4p_outb(info, UART_EFR, b);
-+ hci_h4p_outb(info, UART_LCR, lcr);
-+}
-+
-+void hci_h4p_set_auto_ctsrts(struct hci_h4p_info *info, int on, u8 which)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&info->lock, flags);
-+ __hci_h4p_set_auto_ctsrts(info, on, which);
-+ spin_unlock_irqrestore(&info->lock, flags);
-+}
-+
-+void hci_h4p_change_speed(struct hci_h4p_info *info, unsigned long speed)
-+{
-+ unsigned int divisor;
-+ u8 lcr, mdr1;
-+
-+ NBT_DBG("Setting speed %lu\n", speed);
-+
-+ if (speed >= 460800) {
-+ divisor = UART_CLOCK / 13 / speed;
-+ mdr1 = 3;
-+ } else {
-+ divisor = UART_CLOCK / 16 / speed;
-+ mdr1 = 0;
-+ }
-+
-+ hci_h4p_outb(info, UART_OMAP_MDR1, 7); /* Make sure UART mode is disabled */
-+ lcr = hci_h4p_inb(info, UART_LCR);
-+ hci_h4p_outb(info, UART_LCR, UART_LCR_DLAB); /* Set DLAB */
-+ hci_h4p_outb(info, UART_DLL, divisor & 0xff); /* Set speed */
-+ hci_h4p_outb(info, UART_DLM, divisor >> 8);
-+ hci_h4p_outb(info, UART_LCR, lcr);
-+ hci_h4p_outb(info, UART_OMAP_MDR1, mdr1); /* Make sure UART mode is enabled */
-+}
-+
-+int hci_h4p_reset_uart(struct hci_h4p_info *info)
-+{
-+ int count = 0;
-+
-+ /* Reset the UART */
-+ hci_h4p_outb(info, UART_OMAP_SYSC, UART_SYSC_OMAP_RESET);
-+ while (!(hci_h4p_inb(info, UART_OMAP_SYSS) & UART_SYSS_RESETDONE)) {
-+ if (count++ > 20000) {
-+ dev_err(info->dev, "hci_h4p: UART reset timeout\n");
-+ return -ENODEV;
-+ }
-+ udelay(1);
-+ }
-+
-+ return 0;
-+}
-+
-+int hci_h4p_init_uart(struct hci_h4p_info *info)
-+{
-+ int err;
-+
-+ err = hci_h4p_reset_uart(info);
-+ if (err < 0)
-+ return err;
-+
-+ /* Enable and setup FIFO */
-+ hci_h4p_outb(info, UART_LCR, UART_LCR_WLEN8);
-+ hci_h4p_outb(info, UART_OMAP_MDR1, 0x00); /* Make sure UART mode is enabled */
-+ hci_h4p_outb(info, UART_OMAP_SCR, 0x80);
-+ hci_h4p_outb(info, UART_EFR, UART_EFR_ECB);
-+ hci_h4p_outb(info, UART_MCR, UART_MCR_TCRTLR);
-+ hci_h4p_outb(info, UART_TI752_TLR, 0x1f);
-+ hci_h4p_outb(info, UART_TI752_TCR, 0xef);
-+ hci_h4p_outb(info, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
-+ UART_FCR_CLEAR_XMIT | UART_FCR_R_TRIG_00);
-+ hci_h4p_outb(info, UART_IER, UART_IER_RDI);
-+
-+ return 0;
-+}
---- a/drivers/bluetooth/Kconfig
-+++ b/drivers/bluetooth/Kconfig
-@@ -173,6 +173,16 @@ config BT_HCIBTUART
- Say Y here to compile support for HCI UART devices into the
- kernel or say M to compile it as module (btuart_cs).
-
-+config BT_HCIH4P
-+ tristate "HCI driver with H4 Nokia extensions"
-+ depends on BT && ARCH_OMAP
-+ help
-+ Bluetooth HCI driver with H4 extensions. This driver provides
-+ support for H4+ Bluetooth chip with vendor-specific H4 extensions.
-+
-+ Say Y here to compile support for h4 extended devices into the kernel
-+ or say M to compile it as module (hci_h4p).
-+
- config BT_HCIVHCI
- tristate "HCI VHCI (Virtual HCI device) driver"
- help
---- a/drivers/bluetooth/Makefile
-+++ b/drivers/bluetooth/Makefile
-@@ -11,6 +11,7 @@ obj-$(CONFIG_BT_HCIDTL1) += dtl1_cs.o
- obj-$(CONFIG_BT_HCIBT3C) += bt3c_cs.o
- obj-$(CONFIG_BT_HCIBLUECARD) += bluecard_cs.o
- obj-$(CONFIG_BT_HCIBTUART) += btuart_cs.o
-+obj-$(CONFIG_BT_HCIH4P) += hci_h4p/
-
- obj-$(CONFIG_BT_HCIBTUSB) += btusb.o
- obj-$(CONFIG_BT_HCIBTSDIO) += btsdio.o
+++ /dev/null
---- a/drivers/bluetooth/hci_h4p/core.c
-+++ b/drivers/bluetooth/hci_h4p/core.c
-@@ -36,9 +36,9 @@
- #include <linux/clk.h>
- #include <linux/gpio.h>
-
--#include <mach/hardware.h>
--#include <mach/board.h>
--#include <mach/irqs.h>
-+#include <plat/hardware.h>
-+#include <plat/board.h>
-+#include <plat/irqs.h>
- #include <plat/serial.h>
-
- #include <net/bluetooth/bluetooth.h>
---- a/drivers/bluetooth/hci_h4p/hci_h4p.h
-+++ b/drivers/bluetooth/hci_h4p/hci_h4p.h
-@@ -21,7 +21,7 @@
- *
- */
-
--#include <mach/board.h>
-+#include <plat/board.h>
-
- #include <net/bluetooth/bluetooth.h>
- #include <net/bluetooth/hci_core.h>
---- a/drivers/bluetooth/hci_h4p/sysfs.c
-+++ b/drivers/bluetooth/hci_h4p/sysfs.c
-@@ -48,15 +48,8 @@ static ssize_t hci_h4p_store_bdaddr(stru
- return -EINVAL;
- }
-
-- //for (i = 0; i < 6; i++)
-- //info->bdaddr[i] = bdaddr[i] & 0xff;
--
-- info->bdaddr[0] = 0x00;
-- info->bdaddr[1] = 0x1D;
-- info->bdaddr[2] = 0x6E;
-- info->bdaddr[3] = 0xD4;
-- info->bdaddr[4] = 0xF0;
-- info->bdaddr[5] = 0x37;
-+ for (i = 0; i < 6; i++)
-+ info->bdaddr[i] = bdaddr[i] & 0xff;
-
- return count;
- }
+++ /dev/null
---- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
-+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
-@@ -235,7 +235,7 @@ struct omap_hwmod_irq_info omap2_timer11
- };
-
- struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[] = {
-- { .irq = INT_24XX_UART1_IRQ, },
-+ { .irq = 0, },
- { .irq = -1 }
- };
-
---- a/drivers/tty/serial/omap-serial.c
-+++ b/drivers/tty/serial/omap-serial.c
-@@ -517,8 +517,10 @@ static int serial_omap_startup(struct ua
- /*
- * Allocate the IRQ
- */
-- retval = request_irq(up->port.irq, serial_omap_irq, up->port.irqflags,
-- up->name, up);
-+ retval = 0;
-+ if (up->port.irq)
-+ retval = request_irq(up->port.irq, serial_omap_irq,
-+ up->port.irqflags, up->name, up);
- if (retval)
- return retval;
-
-@@ -629,7 +631,8 @@ static void serial_omap_shutdown(struct
- }
-
- pm_runtime_put(&up->pdev->dev);
-- free_irq(up->port.irq, up);
-+ if (up->port.irq)
-+ free_irq(up->port.irq, up);
- }
-
- static inline void
+++ /dev/null
---- a/arch/arm/mach-omap2/board-n8x0.c
-+++ b/arch/arm/mach-omap2/board-n8x0.c
-@@ -41,6 +41,7 @@
- #include <plat/mmc.h>
- #include <plat/serial.h>
- #include <plat/gpio-switch.h>
-+#include <plat/usb.h>
-
- #include "mux.h"
-
-@@ -486,6 +487,14 @@ static struct musb_hdrc_platform_data tu
- .config = &musb_config,
- };
-
-+static struct omap_usb_config n8x0_omap_usb_config __initdata = {
-+ .otg = 1,
-+ .register_host = 1,
-+ .register_dev = 1,
-+ .hmc_mode = 16,
-+ .pins[0] = 6,
-+};
-+
- static void __init n8x0_usb_init(void)
- {
- int ret = 0;
-@@ -507,6 +516,8 @@ static void __init n8x0_usb_init(void)
- if (ret != 0)
- goto err;
-
-+ omap2_usbfs_init(&n8x0_omap_usb_config);
-+
- printk(announce);
-
- return;
+++ /dev/null
----
- drivers/input/evdev.c | 10 +++++++---
- 1 file changed, 7 insertions(+), 3 deletions(-)
-
---- a/drivers/input/evdev.c
-+++ b/drivers/input/evdev.c
-@@ -92,7 +92,7 @@ static void evdev_event(struct input_han
- unsigned int type, unsigned int code, int value)
- {
- struct evdev *evdev = handle->private;
-- struct evdev_client *client;
-+ struct evdev_client *client, *c;
- struct input_event event;
-
- do_gettimeofday(&event.time);
-@@ -103,9 +103,13 @@ static void evdev_event(struct input_han
- rcu_read_lock();
-
- client = rcu_dereference(evdev->grab);
-- if (client)
-+ if (client) {
- evdev_pass_event(client, &event);
-- else
-+ /* Also pass events to clients that did not grab the device. */
-+ list_for_each_entry_rcu(c, &evdev->client_list, node)
-+ if (c != client)
-+ evdev_pass_event(c, &event);
-+ } else
- list_for_each_entry_rcu(client, &evdev->client_list, node)
- evdev_pass_event(client, &event);
-
+++ /dev/null
---- a/drivers/mmc/host/omap.c
-+++ b/drivers/mmc/host/omap.c
-@@ -1456,6 +1456,7 @@ static int __init mmc_omap_probe(struct
- host->dma_ch = -1;
-
- host->irq = irq;
-+ host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
- host->phys_base = host->mem_res->start;
- host->virt_base = ioremap(res->start, resource_size(res));
- if (!host->virt_base)
-@@ -1495,7 +1496,9 @@ static int __init mmc_omap_probe(struct
- }
- }
-
-- host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
-+ /* Make sure the detect workqueue was run at least once. */
-+ printk(KERN_INFO "OMAP-mmc: waiting for cards...\n");
-+ mmc_flush_scheduled_work();
-
- return 0;
-
---- a/drivers/mmc/core/core.c
-+++ b/drivers/mmc/core/core.c
-@@ -78,12 +78,13 @@ static int mmc_schedule_delayed_work(str
- }
-
- /*
-- * Internal function. Flush all scheduled work from the MMC work queue.
-+ * Flush all scheduled work from the MMC work queue.
- */
--static void mmc_flush_scheduled_work(void)
-+void mmc_flush_scheduled_work(void)
- {
- flush_workqueue(workqueue);
- }
-+EXPORT_SYMBOL(mmc_flush_scheduled_work);
-
- #ifdef CONFIG_FAIL_MMC_REQUEST
-
---- a/include/linux/mmc/host.h
-+++ b/include/linux/mmc/host.h
-@@ -445,6 +445,8 @@ static inline int mmc_boot_partition_acc
- return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
- }
-
-+void mmc_flush_scheduled_work(void);
-+
- #ifdef CONFIG_MMC_CLKGATE
- void mmc_host_clk_hold(struct mmc_host *host);
- void mmc_host_clk_release(struct mmc_host *host);
+++ /dev/null
---- a/arch/arm/mach-omap2/serial.c
-+++ b/arch/arm/mach-omap2/serial.c
-@@ -258,6 +258,8 @@ char *cmdline_find_option(char *str)
- return strstr(saved_command_line, str);
- }
-
-+static struct omap_uart_state statebuf[4];
-+
- static int __init omap_serial_early_init(void)
- {
- do {
-@@ -272,9 +274,9 @@ static int __init omap_serial_early_init
- if (!oh)
- break;
-
-- uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
-- if (WARN_ON(!uart))
-+ if (WARN_ON(num_uarts >= ARRAY_SIZE(statebuf)))
- return -ENODEV;
-+ uart = &statebuf[num_uarts];
-
- uart->oh = oh;
- uart->num = num_uarts++;
+++ /dev/null
---- a/drivers/usb/musb/tusb6010.c
-+++ b/drivers/usb/musb/tusb6010.c
-@@ -221,6 +221,7 @@ void musb_write_fifo(struct musb_hw_ep *
- if (len > 0)
- tusb_fifo_write_unaligned(fifo, buf, len);
- }
-+EXPORT_SYMBOL(musb_write_fifo);
-
- void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
- {
-@@ -268,6 +269,7 @@ void musb_read_fifo(struct musb_hw_ep *h
- if (len > 0)
- tusb_fifo_read_unaligned(fifo, buf, len);
- }
-+EXPORT_SYMBOL(musb_read_fifo);
-
- static struct musb *the_musb;
-
-@@ -1165,7 +1167,7 @@ static const struct musb_platform_ops tu
-
- static u64 tusb_dmamask = DMA_BIT_MASK(32);
-
--static int __init tusb_probe(struct platform_device *pdev)
-+static int tusb_probe(struct platform_device *pdev)
- {
- struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
- struct platform_device *musb;
-@@ -1245,18 +1247,18 @@ static struct platform_driver tusb_drive
- },
- };
-
--MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
--MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
--MODULE_LICENSE("GPL v2");
-+//MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
-+//MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
-+//MODULE_LICENSE("GPL v2");
-
--static int __init tusb_init(void)
-+int musb_hdrc_glue_init(void)
- {
- return platform_driver_probe(&tusb_driver, tusb_probe);
- }
--subsys_initcall(tusb_init);
-+EXPORT_SYMBOL(musb_hdrc_glue_init);
-
--static void __exit tusb_exit(void)
-+void musb_hdrc_glue_exit(void)
- {
- platform_driver_unregister(&tusb_driver);
- }
--module_exit(tusb_exit);
-+EXPORT_SYMBOL(musb_hdrc_glue_exit);
---- a/drivers/usb/musb/musb_core.c
-+++ b/drivers/usb/musb/musb_core.c
-@@ -207,7 +207,7 @@ static struct otg_io_access_ops musb_ulp
-
- /*-------------------------------------------------------------------------*/
-
--#if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_BLACKFIN)
-+#if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_TUSB6010_MODULE) && !defined(CONFIG_USB_MUSB_BLACKFIN)
-
- /*
- * Load an endpoint's FIFO
-@@ -250,7 +250,7 @@ void musb_write_fifo(struct musb_hw_ep *
- }
- }
-
--#if !defined(CONFIG_USB_MUSB_AM35X)
-+#if !defined(CONFIG_USB_MUSB_AM35X) && !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
- /*
- * Unload an endpoint's FIFO
- */
-@@ -2370,8 +2370,13 @@ static struct platform_driver musb_drive
-
- /*-------------------------------------------------------------------------*/
-
-+extern int musb_hdrc_glue_init(void);
-+extern void musb_hdrc_glue_exit(void);
-+
- static int __init musb_init(void)
- {
-+ int err;
-+
- if (usb_disabled())
- return 0;
-
-@@ -2380,7 +2385,17 @@ static int __init musb_init(void)
- ", "
- "otg (peripheral+host)",
- musb_driver_name);
-- return platform_driver_probe(&musb_driver, musb_probe);
-+
-+ err = musb_hdrc_glue_init();
-+ if (err)
-+ return err;
-+ err = platform_driver_probe(&musb_driver, musb_probe);
-+ if (err) {
-+ musb_hdrc_glue_exit();
-+ return err;
-+ }
-+
-+ return 0;
- }
-
- /* make us init after usbcore and i2c (transceivers, regulators, etc)
-@@ -2391,5 +2406,6 @@ fs_initcall(musb_init);
- static void __exit musb_cleanup(void)
- {
- platform_driver_unregister(&musb_driver);
-+ musb_hdrc_glue_exit();
- }
- module_exit(musb_cleanup);
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -51,7 +51,7 @@ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early
- obj-$(CONFIG_USB_ATM) += atm/
- obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
-
--obj-$(CONFIG_USB_MUSB_HDRC) += musb/
-+obj-y += musb/
- obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/
- obj-$(CONFIG_USB_GADGET) += gadget/
-
---- a/drivers/usb/musb/Makefile
-+++ b/drivers/usb/musb/Makefile
-@@ -13,7 +13,7 @@ musb_hdrc-$(CONFIG_DEBUG_FS) += musb_d
- # Hardware Glue Layer
- obj-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o
- obj-$(CONFIG_USB_MUSB_AM35X) += am35x.o
--obj-$(CONFIG_USB_MUSB_TUSB6010) += tusb6010.o
-+musb_hdrc-$(subst m,y,$(CONFIG_USB_MUSB_TUSB6010)) += tusb6010.o
- obj-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o
- obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o
- obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o
+++ /dev/null
---- a/drivers/cbus/Kconfig
-+++ b/drivers/cbus/Kconfig
-@@ -83,4 +83,12 @@ config CBUS_RETU_HEADSET
-
- endif # CBUS_RETU
-
-+config N810BM
-+ depends on CBUS_RETU && CBUS_TAHVO
-+ tristate "Nokia n810 battery management"
-+ ---help---
-+ Nokia n810 device battery management.
-+
-+ If unsure, say N.
-+
- endmenu
---- a/drivers/cbus/Makefile
-+++ b/drivers/cbus/Makefile
-@@ -11,3 +11,6 @@ obj-$(CONFIG_CBUS_RETU_POWERBUTTON) += r
- obj-$(CONFIG_CBUS_RETU_RTC) += retu-rtc.o
- obj-$(CONFIG_CBUS_RETU_WDT) += retu-wdt.o
- obj-$(CONFIG_CBUS_RETU_HEADSET) += retu-headset.o
-+n810bm-y += n810bm_main.o
-+n810bm-y += lipocharge.o
-+obj-$(CONFIG_N810BM) += n810bm.o
---- /dev/null
-+++ b/drivers/cbus/n810bm_main.c
-@@ -0,0 +1,1572 @@
-+/*
-+ * Nokia n810 battery management
-+ *
-+ * WARNING: This driver is based on unconfirmed documentation.
-+ * It is possibly dangerous to use this software.
-+ * Use this software at your own risk!
-+ *
-+ * Copyright (c) 2010-2011 Michael Buesch <mb@bu3sch.de>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#define DEBUG
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/mutex.h>
-+#include <linux/timer.h>
-+#include <linux/firmware.h>
-+#include <linux/bitops.h>
-+#include <linux/workqueue.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+
-+#include "cbus.h"
-+#include "retu.h"
-+#include "tahvo.h"
-+#include "lipocharge.h"
-+
-+
-+#define N810BM_PMM_BLOCK_FILENAME "n810-cal-bme-pmm.fw"
-+#define N810BM_PMM_BLOCK_SIZE 0x600
-+#define N810BM_PMM_GROUP_SIZE 0x200
-+#define N810BM_PMM_ELEM_SIZE 0x10
-+
-+#define N810BM_CHECK_INTERVAL (HZ * 2)
-+#define N810BM_MIN_VOLTAGE_THRES 3200 /* Absolute minimum voltage threshold */
-+
-+
-+/* RETU_ADC_BSI
-+ * The battery size indicator ADC measures the resistance between
-+ * the battery BSI pin and ground. This is used to detect the battery
-+ * capacity, as the BSI resistor is related to capacity.
-+ *
-+ * Manually measured lookup table.
-+ * Hard to measure, thus not very accurate.
-+ *
-+ * Resistance | ADC value
-+ * ========================
-+ * 120k | 0x3AC
-+ * 110k | 0x37C
-+ * 100k | 0x351
-+ * 90k | 0x329
-+ */
-+
-+/* RETU_ADC_BATTVOLT
-+ * Manually measured lookup table.
-+ * Hard to measure, thus not very accurate.
-+ *
-+ * Voltage | ADC value
-+ * =====================
-+ * 2.80V | 0x037
-+ * 2.90V | 0x05E
-+ * 3.00V | 0x090
-+ * 3.10V | 0x0A4
-+ * 3.20V | 0x0CC
-+ * 3.30V | 0x0EF
-+ * 3.40V | 0x115
-+ * 3.50V | 0x136
-+ * 3.60V | 0x15C
-+ * 3.70V | 0x187
-+ * 3.80V | 0x1A5
-+ * 3.90V | 0x1C9
-+ * 4.00V | 0x1ED
-+ * 4.10V | 0x212
-+ * 4.20V | 0x236
-+ */
-+
-+
-+/* PMM block ADC IDs */
-+enum n810bm_pmm_adc_id {
-+ N810BM_PMM_ADC_BATVOLT = 0x01, /* Battery voltage */
-+ N810BM_PMM_ADC_CHGVOLT = 0x02, /* Charger voltage */
-+ N810BM_PMM_ADC_GND2 = 0x03, /* Ground 0V */
-+ N810BM_PMM_ADC_BSI = 0x04, /* Battery size indicator */
-+ N810BM_PMM_ADC_BATTEMP = 0x05, /* Battery temperature */
-+ N810BM_PMM_ADC_HEADSET = 0x06, /* Headset detection */
-+ N810BM_PMM_ADC_HOOKDET = 0x07, /* Hook detection */
-+ N810BM_PMM_ADC_LIGHTSENS = 0x08, /* Light sensor */
-+ N810BM_PMM_ADC_BATCURR = 0x0E, /* Battery current */
-+ N810BM_PMM_ADC_BKUPVOLT = 0x13, /* Backup battery voltage */
-+ N810BM_PMM_ADC_LIGHTTEMP = 0x14, /* Light sensor temperature */
-+ N810BM_PMM_ADC_RFGP = 0x15, /* RF GP */
-+ N810BM_PMM_ADC_WBTX = 0x16, /* Wideband TX detection */
-+ N810BM_PMM_ADC_RETUTEMP = 0x17, /* RETU chip temperature */
-+ N810BM_PMM_ADC_0xFE = 0xFE,
-+};
-+
-+struct n810bm_adc_calib {
-+ enum n810bm_pmm_adc_id id;
-+ u8 flags;
-+ u8 adc_groupnr;
-+ u32 field1;
-+ u32 field2;
-+ u16 field3;
-+ u16 field4;
-+};
-+
-+struct n810bm_calib {
-+ struct n810bm_adc_calib adc[25];
-+};
-+
-+enum n810bm_capacity {
-+ N810BM_CAP_UNKNOWN = -1,
-+ N810BM_CAP_NONE = 0,
-+ N810BM_CAP_1500MAH = 1500, /* 1500 mAh battery */
-+};
-+
-+enum n810bm_notify_flags {
-+ N810BM_NOTIFY_charger_present,
-+ N810BM_NOTIFY_charger_state,
-+ N810BM_NOTIFY_charger_pwm,
-+};
-+
-+struct n810bm {
-+ int tahvo_irq;
-+ bool tahvo_irq_enabled;
-+
-+ bool battery_present; /* A battery is inserted */
-+ bool charger_present; /* The charger is connected */
-+ enum n810bm_capacity capacity; /* The capacity of the inserted battery (if any) */
-+
-+ bool charger_enabled; /* Want to charge? */
-+ struct lipocharge charger; /* Charger subsystem */
-+ unsigned int active_current_pwm; /* Active value of TAHVO_REG_CHGCURR */
-+ int current_measure_enabled; /* Current measure enable refcount */
-+
-+ struct platform_device *pdev;
-+ struct n810bm_calib calib; /* Calibration data */
-+
-+ bool verbose_charge_log; /* Verbose charge logging */
-+
-+ unsigned long notify_flags;
-+ struct work_struct notify_work;
-+ struct delayed_work periodic_check_work;
-+
-+ bool initialized; /* The hardware was initialized */
-+ struct mutex mutex;
-+};
-+
-+static void n810bm_notify_charger_present(struct n810bm *bm);
-+static void n810bm_notify_charger_state(struct n810bm *bm);
-+static void n810bm_notify_charger_pwm(struct n810bm *bm);
-+
-+
-+static struct platform_device *n810bm_retu_device;
-+static struct platform_device *n810bm_tahvo_device;
-+
-+
-+static inline struct n810bm * device_to_n810bm(struct device *dev)
-+{
-+ struct platform_device *pdev = to_platform_device(dev);
-+ struct n810bm *bm = platform_get_drvdata(pdev);
-+
-+ return bm;
-+}
-+
-+static inline bool n810bm_known_battery_present(struct n810bm *bm)
-+{
-+ return bm->battery_present &&
-+ bm->capacity != N810BM_CAP_UNKNOWN &&
-+ bm->capacity != N810BM_CAP_NONE;
-+}
-+
-+static void n810bm_emergency(struct n810bm *bm, const char *message) __noreturn;
-+static void n810bm_emergency(struct n810bm *bm, const char *message)
-+{
-+ printk(KERN_EMERG "n810 battery management fatal fault: %s\n", message);
-+ cbus_emergency();
-+}
-+
-+static u16 tahvo_read(struct n810bm *bm, unsigned int reg)
-+{
-+ return tahvo_read_reg(&n810bm_tahvo_device->dev, reg);
-+}
-+
-+static void tahvo_maskset(struct n810bm *bm, unsigned int reg, u16 mask, u16 set)
-+{
-+ tahvo_set_clear_reg_bits(&n810bm_tahvo_device->dev, reg, set, mask);
-+}
-+
-+static inline void tahvo_write(struct n810bm *bm, unsigned int reg, u16 value)
-+{
-+ tahvo_write_reg(&n810bm_tahvo_device->dev, reg, value);
-+}
-+
-+static inline void tahvo_set(struct n810bm *bm, unsigned int reg, u16 mask)
-+{
-+ tahvo_set_clear_reg_bits(&n810bm_tahvo_device->dev, reg, mask, mask);
-+}
-+
-+static inline void tahvo_clear(struct n810bm *bm, unsigned int reg, u16 mask)
-+{
-+ tahvo_set_clear_reg_bits(&n810bm_tahvo_device->dev, reg, 0, mask);
-+}
-+
-+static u16 retu_read(struct n810bm *bm, unsigned int reg)
-+{
-+ return retu_read_reg(&n810bm_retu_device->dev, reg);
-+}
-+
-+static void retu_maskset(struct n810bm *bm, unsigned int reg, u16 mask, u16 set)
-+{
-+ retu_set_clear_reg_bits(&n810bm_retu_device->dev, reg, set, mask);
-+}
-+
-+static inline void retu_write(struct n810bm *bm, unsigned int reg, u16 value)
-+{
-+ retu_write_reg(&n810bm_retu_device->dev, reg, value);
-+}
-+
-+static int retu_adc_average(struct n810bm *bm, unsigned int chan,
-+ unsigned int nr_passes)
-+{
-+ unsigned int i, value = 0;
-+ int ret;
-+
-+ if (WARN_ON(!nr_passes))
-+ return 0;
-+ for (i = 0; i < nr_passes; i++) {
-+ ret = retu_read_adc(&n810bm_retu_device->dev, chan);
-+ if (ret < 0)
-+ return ret;
-+ value += ret;
-+ }
-+ value /= nr_passes;
-+
-+ return value;
-+}
-+
-+static struct n810bm_adc_calib * n810bm_get_adc_calib(struct n810bm *bm,
-+ enum n810bm_pmm_adc_id id)
-+{
-+ unsigned int index = 0;
-+ struct n810bm_adc_calib *cal;
-+
-+ if (id != N810BM_PMM_ADC_0xFE)
-+ index = (unsigned int)id + 1;
-+ if (index >= ARRAY_SIZE(bm->calib.adc))
-+ return NULL;
-+
-+ cal = &bm->calib.adc[index];
-+ WARN_ON(cal->id && cal->id != id);
-+
-+ return cal;
-+}
-+
-+static int pmm_record_get(struct n810bm *bm,
-+ const struct firmware *pmm_block,
-+ void *buffer, size_t length,
-+ unsigned int group, unsigned int element, unsigned int offset)
-+{
-+ const u8 *pmm_area = pmm_block->data;
-+ u8 active_group_mask;
-+
-+ if (pmm_block->size != N810BM_PMM_BLOCK_SIZE)
-+ return -EINVAL;
-+ if (group >= N810BM_PMM_BLOCK_SIZE / N810BM_PMM_GROUP_SIZE)
-+ return -EINVAL;
-+ if (element >= N810BM_PMM_GROUP_SIZE / N810BM_PMM_ELEM_SIZE)
-+ return -EINVAL;
-+ if (offset >= N810BM_PMM_ELEM_SIZE || length > N810BM_PMM_ELEM_SIZE ||
-+ length + offset > N810BM_PMM_ELEM_SIZE)
-+ return -EINVAL;
-+
-+ active_group_mask = pmm_area[16];
-+ if (!(active_group_mask & (1 << group))) {
-+ dev_dbg(&bm->pdev->dev, "pwm_record_get: Requested group %u, "
-+ "but group is not active", group);
-+ return -ENOENT;
-+ }
-+
-+ memcpy(buffer,
-+ pmm_area + group * N810BM_PMM_GROUP_SIZE
-+ + element * N810BM_PMM_ELEM_SIZE
-+ + offset,
-+ length);
-+
-+ return 0;
-+}
-+
-+/* PMM block group 1 element */
-+struct group1_element {
-+ u8 id;
-+ u8 flags;
-+ u8 adc_groupnr;
-+ u8 _padding;
-+ __le32 field1;
-+ __le32 field2;
-+} __packed;
-+
-+static int extract_group1_elem(struct n810bm *bm,
-+ const struct firmware *pmm_block,
-+ const enum n810bm_pmm_adc_id *pmm_adc_ids, size_t nr_pmm_adc_ids,
-+ u32 field1_mask, u32 field2_mask)
-+{
-+ struct group1_element elem;
-+ int err;
-+ unsigned int i, element_nr;
-+ struct n810bm_adc_calib *adc_calib;
-+
-+ for (i = 0; i < nr_pmm_adc_ids; i++) {
-+ element_nr = (unsigned int)(pmm_adc_ids[i]) + 3;
-+
-+ err = pmm_record_get(bm, pmm_block, &elem, sizeof(elem),
-+ 1, element_nr, 0);
-+ if (err)
-+ continue;
-+ adc_calib = n810bm_get_adc_calib(bm, elem.id);
-+ if (!adc_calib) {
-+ dev_err(&bm->pdev->dev, "extract_group1_elem: "
-+ "Could not get calib element for 0x%02X",
-+ elem.id);
-+ return -EINVAL;
-+ }
-+
-+ if (adc_calib->flags == elem.flags) {
-+ adc_calib->field1 = le32_to_cpu(elem.field1) & field1_mask;
-+ adc_calib->field2 = le32_to_cpu(elem.field2) & field2_mask;
-+ } else {
-+ dev_dbg(&bm->pdev->dev, "extract_group1_elem: "
-+ "Not extracting fields due to flags mismatch: "
-+ "0x%02X vs 0x%02X",
-+ adc_calib->flags, elem.flags);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int n810bm_parse_pmm_group1(struct n810bm *bm,
-+ const struct firmware *pmm_block)
-+{
-+ struct n810bm_adc_calib *adc_calib;
-+ struct group1_element elem;
-+ int err;
-+
-+ static const enum n810bm_pmm_adc_id pmm_adc_ids_1[] = {
-+ N810BM_PMM_ADC_BATVOLT,
-+ N810BM_PMM_ADC_CHGVOLT,
-+ N810BM_PMM_ADC_BKUPVOLT,
-+ N810BM_PMM_ADC_BATCURR,
-+ };
-+ static const enum n810bm_pmm_adc_id pmm_adc_ids_2[] = {
-+ N810BM_PMM_ADC_BSI,
-+ };
-+ static const enum n810bm_pmm_adc_id pmm_adc_ids_3[] = {
-+ N810BM_PMM_ADC_BATTEMP,
-+ };
-+
-+ /* Parse element 2 */
-+ err = pmm_record_get(bm, pmm_block, &elem, sizeof(elem),
-+ 1, 2, 0);
-+ if (err) {
-+ dev_err(&bm->pdev->dev,
-+ "PMM: Failed to get group 1 / element 2");
-+ return err;
-+ }
-+ if (elem.id == N810BM_PMM_ADC_0xFE && elem.flags == 0x05) {
-+ adc_calib = n810bm_get_adc_calib(bm, elem.id);
-+ if (!adc_calib) {
-+ dev_err(&bm->pdev->dev,
-+ "calib extract: Failed to get 0xFE calib");
-+ return -EINVAL;
-+ }
-+ adc_calib->id = elem.id;
-+ adc_calib->flags = elem.flags;
-+ adc_calib->field1 = le32_to_cpu(elem.field1);
-+ adc_calib->field2 = le32_to_cpu(elem.field2);
-+ }
-+
-+ err = extract_group1_elem(bm, pmm_block,
-+ pmm_adc_ids_1, ARRAY_SIZE(pmm_adc_ids_1),
-+ 0xFFFFFFFF, 0xFFFFFFFF);
-+ if (err)
-+ return err;
-+ err = extract_group1_elem(bm, pmm_block,
-+ pmm_adc_ids_2, ARRAY_SIZE(pmm_adc_ids_2),
-+ 0xFFFFFFFF, 0);
-+ if (err)
-+ return err;
-+ err = extract_group1_elem(bm, pmm_block,
-+ pmm_adc_ids_3, ARRAY_SIZE(pmm_adc_ids_3),
-+ 0xFFFFFFFF, 0x0000FFFF);
-+ if (err)
-+ return err;
-+
-+ return 0;
-+}
-+
-+static int n810bm_parse_pmm_group2(struct n810bm *bm,
-+ const struct firmware *pmm_block)
-+{
-+ dev_err(&bm->pdev->dev, "TODO: CAL BME PMM group 2 parser not implemented, yet");
-+ return -EOPNOTSUPP;
-+}
-+
-+static void n810bm_adc_calib_set_defaults(struct n810bm *bm)
-+{
-+ struct n810bm_adc_calib *adc_calib;
-+ unsigned int i;
-+
-+ static const struct n810bm_adc_calib defaults[] = {
-+ /* ADC group-nr 0 */
-+ {
-+ .id = N810BM_PMM_ADC_HEADSET,
-+ .flags = 0x00,
-+ .adc_groupnr = 0,
-+ }, {
-+ .id = N810BM_PMM_ADC_HOOKDET,
-+ .flags = 0x00,
-+ .adc_groupnr = 0,
-+ }, {
-+ .id = N810BM_PMM_ADC_RFGP,
-+ .flags = 0x00,
-+ .adc_groupnr = 0,
-+ }, {
-+ .id = N810BM_PMM_ADC_LIGHTSENS,
-+ .flags = 0x00,
-+ .adc_groupnr = 0,
-+ }, {
-+ .id = N810BM_PMM_ADC_WBTX,
-+ .flags = 0x00,
-+ .adc_groupnr = 0,
-+ }, {
-+ .id = N810BM_PMM_ADC_RETUTEMP,
-+ .flags = 0x00,
-+ .adc_groupnr = 0,
-+ }, {
-+ .id = N810BM_PMM_ADC_GND2,
-+ .flags = 0x00,
-+ .adc_groupnr = 0,
-+ },
-+ /* ADC group-nr 1 */
-+ {
-+ .id = N810BM_PMM_ADC_0xFE,
-+ .flags = 0x05,
-+ .adc_groupnr = 1,
-+ .field1 = (u32)-2,
-+ .field2 = 13189,
-+ }, {
-+ .id = N810BM_PMM_ADC_BATVOLT,
-+ .flags = 0x01,
-+ .adc_groupnr = 1,
-+ .field1 = 2527,
-+ .field2 = 21373,
-+ }, {
-+ .id = N810BM_PMM_ADC_CHGVOLT,
-+ .flags = 0x01,
-+ .adc_groupnr = 1,
-+ .field1 = 0,
-+ .field2 = 129848,
-+ }, {
-+ .id = N810BM_PMM_ADC_BKUPVOLT,
-+ .flags = 0x01,
-+ .adc_groupnr = 1,
-+ .field1 = 0,
-+ .field2 = 20000,
-+ }, {
-+ .id = N810BM_PMM_ADC_BATCURR,
-+ .flags = 0x06,
-+ .adc_groupnr = 1,
-+ .field1 = 0,
-+ .field2 = 9660,
-+ },
-+ /* ADC group-nr 2 */
-+ {
-+ .id = N810BM_PMM_ADC_BSI,
-+ .flags = 0x02,
-+ .adc_groupnr = 2,
-+ .field1 = 1169,
-+ .field2 = 0,
-+ },
-+ /* ADC group-nr 3 */
-+ {
-+ .id = N810BM_PMM_ADC_BATTEMP,
-+ .flags = 0x03,
-+ .adc_groupnr = 3,
-+ .field1 = 265423000,
-+ .field2 = 298,
-+ },
-+ /* ADC group-nr 4 */
-+ {
-+ .id = N810BM_PMM_ADC_LIGHTTEMP,
-+ .flags = 0x04,
-+ .adc_groupnr = 4,
-+ .field1 = 19533778,
-+ .field2 = 308019670,
-+ .field3 = 4700,
-+ .field4 = 2500,
-+ },
-+ };
-+
-+ /* Clear the array */
-+ memset(&bm->calib.adc, 0, sizeof(bm->calib.adc));
-+ for (i = 0; i < ARRAY_SIZE(bm->calib.adc); i++)
-+ bm->calib.adc[i].flags = 0xFF;
-+
-+ /* Copy the defaults */
-+ for (i = 0; i < ARRAY_SIZE(defaults); i++) {
-+ adc_calib = n810bm_get_adc_calib(bm, defaults[i].id);
-+ if (WARN_ON(!adc_calib))
-+ continue;
-+ *adc_calib = defaults[i];
-+ }
-+}
-+
-+static int n810bm_parse_pmm_block(struct n810bm *bm,
-+ const struct firmware *pmm_block)
-+{
-+ u8 byte;
-+ int err;
-+ unsigned int i, count;
-+ struct n810bm_adc_calib *adc_calib;
-+
-+ /* Initialize to defaults */
-+ n810bm_adc_calib_set_defaults(bm);
-+
-+ /* Parse the PMM data */
-+ err = pmm_record_get(bm, pmm_block, &byte, sizeof(byte),
-+ 1, 0, 0); /* group 1 / element 0 */
-+ err |= (byte != 0x01);
-+ err |= pmm_record_get(bm, pmm_block, &byte, sizeof(byte),
-+ 1, 1, 0); /* group 1 / element 1 */
-+ err |= (byte != 0x01);
-+ if (err)
-+ err = n810bm_parse_pmm_group2(bm, pmm_block);
-+ else
-+ err = n810bm_parse_pmm_group1(bm, pmm_block);
-+ if (err)
-+ return err;
-+
-+ /* Sanity checks */
-+ for (i = 0, count = 0; i < ARRAY_SIZE(bm->calib.adc); i++) {
-+ adc_calib = &bm->calib.adc[i];
-+ if (adc_calib->flags == 0xFF)
-+ continue;
-+ switch (adc_calib->id) {
-+ case N810BM_PMM_ADC_BATVOLT:
-+ if (adc_calib->field1 < 2400 ||
-+ adc_calib->field1 > 2700)
-+ goto value_check_fail;
-+ if (adc_calib->field2 < 20000 ||
-+ adc_calib->field2 > 23000)
-+ goto value_check_fail;
-+ count++;
-+ break;
-+ case N810BM_PMM_ADC_BSI:
-+ if (adc_calib->field1 < 1100 ||
-+ adc_calib->field1 > 1300)
-+ goto value_check_fail;
-+ count++;
-+ break;
-+ case N810BM_PMM_ADC_BATCURR:
-+ if (adc_calib->field2 < 7000 ||
-+ adc_calib->field2 > 12000)
-+ goto value_check_fail;
-+ count++;
-+ break;
-+ case N810BM_PMM_ADC_0xFE:
-+ if ((s32)adc_calib->field1 > 14 ||
-+ (s32)adc_calib->field1 < -14)
-+ goto value_check_fail;
-+ if (adc_calib->field2 < 13000 ||
-+ adc_calib->field2 > 13350)
-+ goto value_check_fail;
-+ count++;
-+ break;
-+ case N810BM_PMM_ADC_CHGVOLT:
-+ case N810BM_PMM_ADC_BATTEMP:
-+ case N810BM_PMM_ADC_BKUPVOLT:
-+ count++;
-+ break;
-+ case N810BM_PMM_ADC_GND2:
-+ case N810BM_PMM_ADC_HOOKDET:
-+ case N810BM_PMM_ADC_LIGHTSENS:
-+ case N810BM_PMM_ADC_HEADSET:
-+ case N810BM_PMM_ADC_LIGHTTEMP:
-+ case N810BM_PMM_ADC_RFGP:
-+ case N810BM_PMM_ADC_WBTX:
-+ case N810BM_PMM_ADC_RETUTEMP:
-+ break;
-+ }
-+ dev_dbg(&bm->pdev->dev,
-+ "ADC 0x%02X calib: 0x%02X 0x%02X 0x%08X 0x%08X 0x%04X 0x%04X",
-+ adc_calib->id, adc_calib->flags, adc_calib->adc_groupnr,
-+ adc_calib->field1, adc_calib->field2,
-+ adc_calib->field3, adc_calib->field4);
-+ }
-+ if (count != 7) {
-+ dev_err(&bm->pdev->dev, "PMM sanity check: Did not find "
-+ "all required values (count=%u)", count);
-+ goto check_fail;
-+ }
-+
-+ return 0;
-+
-+value_check_fail:
-+ dev_err(&bm->pdev->dev, "PMM image sanity check failed "
-+ "(id=%02X, field1=%08X, field2=%08X)",
-+ adc_calib->id, adc_calib->field1, adc_calib->field2);
-+check_fail:
-+ return -EILSEQ;
-+}
-+
-+/* Set the current measure timer that triggers on Tahvo IRQ 7
-+ * An interval of zero disables the timer. */
-+static void n810bm_set_current_measure_timer(struct n810bm *bm,
-+ u16 millisec_interval)
-+{
-+ u16 value = millisec_interval;
-+
-+ if (value <= 0xF905) {
-+ value = ((u64)0x10624DD3 * (u64)(value + 0xF9)) >> 32;
-+ value /= 16;
-+ } else
-+ value = 0xFF;
-+
-+ tahvo_write(bm, TAHVO_REG_BATCURRTIMER, value & 0xFF);
-+
-+ tahvo_set(bm, TAHVO_REG_CHGCTL,
-+ TAHVO_REG_CHGCTL_CURTIMRST);
-+ tahvo_clear(bm, TAHVO_REG_CHGCTL,
-+ TAHVO_REG_CHGCTL_CURTIMRST);
-+
-+ if (millisec_interval) {
-+ if (!bm->tahvo_irq_enabled) {
-+ bm->tahvo_irq_enabled = 1;
-+ enable_irq(bm->tahvo_irq);
-+ }
-+ } else {
-+ if (bm->tahvo_irq_enabled) {
-+ bm->tahvo_irq_enabled = 0;
-+ disable_irq_nosync(bm->tahvo_irq);
-+ }
-+ }
-+
-+ //TODO also do a software timer for safety.
-+}
-+
-+static void n810bm_enable_current_measure(struct n810bm *bm)
-+{
-+ WARN_ON(bm->current_measure_enabled < 0);
-+ if (!bm->current_measure_enabled) {
-+ /* Enable the current measurement circuitry */
-+ tahvo_set(bm, TAHVO_REG_CHGCTL,
-+ TAHVO_REG_CHGCTL_CURMEAS);
-+ dev_dbg(&bm->pdev->dev,
-+ "Current measurement circuitry enabled");
-+ }
-+ bm->current_measure_enabled++;
-+}
-+
-+static void n810bm_disable_current_measure(struct n810bm *bm)
-+{
-+ bm->current_measure_enabled--;
-+ WARN_ON(bm->current_measure_enabled < 0);
-+ if (!bm->current_measure_enabled) {
-+ /* Disable the current measurement circuitry */
-+ tahvo_clear(bm, TAHVO_REG_CHGCTL,
-+ TAHVO_REG_CHGCTL_CURMEAS);
-+ dev_dbg(&bm->pdev->dev,
-+ "Current measurement circuitry disabled");
-+ }
-+}
-+
-+/* Measure the actual battery current. Returns a signed value in mA.
-+ * Does only work, if current measurement was enabled. */
-+static int n810bm_measure_batt_current(struct n810bm *bm)
-+{
-+ u16 retval;
-+ int adc = 0, ma, i;
-+
-+ if (WARN_ON(bm->current_measure_enabled <= 0))
-+ return 0;
-+ for (i = 0; i < 3; i++) {
-+ retval = tahvo_read(bm, TAHVO_REG_BATCURR);
-+ adc += (s16)retval; /* Value is signed */
-+ }
-+ adc /= 3;
-+
-+ //TODO convert to mA
-+ ma = adc;
-+
-+ return ma;
-+}
-+
-+/* Requires bm->mutex locked */
-+static int n810bm_measure_batt_current_async(struct n810bm *bm)
-+{
-+ int ma;
-+ bool charging = lipocharge_is_charging(&bm->charger);
-+
-+ n810bm_enable_current_measure(bm);
-+ if (!charging)
-+ WARN_ON(bm->active_current_pwm != 0);
-+ tahvo_maskset(bm, TAHVO_REG_CHGCTL,
-+ TAHVO_REG_CHGCTL_EN |
-+ TAHVO_REG_CHGCTL_PWMOVR |
-+ TAHVO_REG_CHGCTL_PWMOVRZERO,
-+ TAHVO_REG_CHGCTL_EN |
-+ TAHVO_REG_CHGCTL_PWMOVR |
-+ (charging ? 0 : TAHVO_REG_CHGCTL_PWMOVRZERO));
-+ ma = n810bm_measure_batt_current(bm);
-+ tahvo_maskset(bm, TAHVO_REG_CHGCTL,
-+ TAHVO_REG_CHGCTL_EN |
-+ TAHVO_REG_CHGCTL_PWMOVR |
-+ TAHVO_REG_CHGCTL_PWMOVRZERO,
-+ (charging ? TAHVO_REG_CHGCTL_EN : 0));
-+ n810bm_disable_current_measure(bm);
-+
-+ return ma;
-+}
-+
-+static int adc_sanity_check(struct n810bm *bm, unsigned int channel)
-+{
-+ int value;
-+
-+ value = retu_read_adc(&n810bm_retu_device->dev, channel);
-+ if (value < 0) {
-+ dev_err(&bm->pdev->dev, "Failed to read GND ADC channel %u",
-+ channel);
-+ return -EIO;
-+ }
-+ dev_dbg(&bm->pdev->dev,
-+ "GND ADC channel %u sanity check got value: %d",
-+ channel, value);
-+ if (value > 5) {
-+ n810bm_emergency(bm, "GND ADC sanity check failed");
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static int n810bm_check_adc_sanity(struct n810bm *bm)
-+{
-+ int err;
-+
-+ /* Discard one conversion */
-+ retu_write(bm, RETU_REG_ADCSCR, 0);
-+ retu_read_adc(&n810bm_retu_device->dev, RETU_ADC_GND2);
-+
-+ err = adc_sanity_check(bm, RETU_ADC_GND2);
-+ if (err)
-+ return err;
-+
-+ return 0;
-+}
-+
-+/* Measure the battery voltage. Returns the value in mV (or negative value on error). */
-+static int n810bm_measure_batt_voltage(struct n810bm *bm)
-+{
-+ int adc;
-+ unsigned int mv;
-+ const unsigned int scale = 1000;
-+
-+ adc = retu_adc_average(bm, RETU_ADC_BATTVOLT, 5);
-+ if (adc < 0)
-+ return adc;
-+ if (adc <= 0x37)
-+ return 2800;
-+ mv = 2800 + ((adc - 0x37) * (((4200 - 2800) * scale) / (0x236 - 0x37))) / scale;
-+
-+ //TODO compensate for power consumption
-+ //TODO honor calibration values
-+
-+ return mv;
-+}
-+
-+/* Measure the charger voltage. Returns the value in mV (or negative value on error). */
-+static int n810bm_measure_charger_voltage(struct n810bm *bm)
-+{
-+ int adc;
-+ unsigned int mv;
-+
-+ adc = retu_adc_average(bm, RETU_ADC_CHGVOLT, 5);
-+ if (adc < 0)
-+ return adc;
-+ //TODO convert to mV
-+ mv = adc;
-+
-+ return mv;
-+}
-+
-+/* Measure backup battery voltage. Returns the value in mV (or negative value on error). */
-+static int n810bm_measure_backup_batt_voltage(struct n810bm *bm)
-+{
-+ int adc;
-+ unsigned int mv;
-+
-+ adc = retu_adc_average(bm, RETU_ADC_BKUPVOLT, 3);
-+ if (adc < 0)
-+ return adc;
-+ //TODO convert to mV
-+ mv = adc;
-+
-+ return mv;
-+}
-+
-+/* Measure the battery temperature. Returns the value in K (or negative value on error). */
-+static int n810bm_measure_batt_temp(struct n810bm *bm)
-+{
-+ int adc;
-+ unsigned int k;
-+
-+ adc = retu_adc_average(bm, RETU_ADC_BATTEMP, 3);
-+ if (adc < 0)
-+ return adc;
-+ //TODO convert to K
-+ k = adc;
-+
-+ return k;
-+}
-+
-+/* Read the battery capacity via BSI pin. */
-+static enum n810bm_capacity n810bm_read_batt_capacity(struct n810bm *bm)
-+{
-+ int adc;
-+ const unsigned int hyst = 20;
-+
-+ adc = retu_adc_average(bm, RETU_ADC_BSI, 5);
-+ if (adc < 0) {
-+ dev_err(&bm->pdev->dev, "Failed to read BSI ADC");
-+ return N810BM_CAP_UNKNOWN;
-+ }
-+
-+ if (adc >= 0x3B5 - hyst && adc <= 0x3B5 + hyst)
-+ return N810BM_CAP_1500MAH;
-+
-+ dev_err(&bm->pdev->dev, "Capacity indicator 0x%X unknown", adc);
-+
-+ return N810BM_CAP_UNKNOWN;
-+}
-+
-+/* Convert a battery voltage (in mV) to percentage. */
-+static unsigned int n810bm_mvolt2percent(unsigned int mv)
-+{
-+ const unsigned int minv = 3700;
-+ const unsigned int maxv = 4150;
-+ unsigned int percent;
-+
-+ mv = clamp(mv, minv, maxv);
-+ percent = (mv - minv) * 100 / (maxv - minv);
-+
-+ return percent;
-+}
-+
-+static void n810bm_start_charge(struct n810bm *bm)
-+{
-+ int err;
-+
-+ WARN_ON(!bm->battery_present);
-+ WARN_ON(!bm->charger_present);
-+
-+ /* Set PWM to zero */
-+ bm->active_current_pwm = 0;
-+ tahvo_write(bm, TAHVO_REG_CHGCURR, bm->active_current_pwm);
-+
-+ /* Charge global enable */
-+ tahvo_maskset(bm, TAHVO_REG_CHGCTL,
-+ TAHVO_REG_CHGCTL_EN |
-+ TAHVO_REG_CHGCTL_PWMOVR |
-+ TAHVO_REG_CHGCTL_PWMOVRZERO,
-+ TAHVO_REG_CHGCTL_EN);
-+
-+ WARN_ON((int)bm->capacity <= 0);
-+ bm->charger.capacity = bm->capacity;
-+ err = lipocharge_start(&bm->charger);
-+ WARN_ON(err);
-+
-+ /* Initialize current measurement circuitry */
-+ n810bm_enable_current_measure(bm);
-+ n810bm_set_current_measure_timer(bm, 250);
-+
-+ dev_info(&bm->pdev->dev, "Charging battery");
-+ n810bm_notify_charger_state(bm);
-+ n810bm_notify_charger_pwm(bm);
-+}
-+
-+static void n810bm_stop_charge(struct n810bm *bm)
-+{
-+ if (lipocharge_is_charging(&bm->charger)) {
-+ n810bm_set_current_measure_timer(bm, 0);
-+ n810bm_disable_current_measure(bm);
-+ }
-+ lipocharge_stop(&bm->charger);
-+
-+ /* Set PWM to zero */
-+ bm->active_current_pwm = 0;
-+ tahvo_write(bm, TAHVO_REG_CHGCURR, bm->active_current_pwm);
-+
-+ /* Charge global disable */
-+ tahvo_maskset(bm, TAHVO_REG_CHGCTL,
-+ TAHVO_REG_CHGCTL_EN |
-+ TAHVO_REG_CHGCTL_PWMOVR |
-+ TAHVO_REG_CHGCTL_PWMOVRZERO,
-+ 0);
-+
-+ dev_info(&bm->pdev->dev, "Not charging battery");
-+ n810bm_notify_charger_state(bm);
-+ n810bm_notify_charger_pwm(bm);
-+}
-+
-+/* Periodic check */
-+static void n810bm_periodic_check_work(struct work_struct *work)
-+{
-+ struct n810bm *bm = container_of(to_delayed_work(work),
-+ struct n810bm, periodic_check_work);
-+ u16 status;
-+ bool battery_was_present, charger_was_present;
-+ int mv;
-+
-+ mutex_lock(&bm->mutex);
-+
-+ status = retu_read(bm, RETU_REG_STATUS);
-+ battery_was_present = bm->battery_present;
-+ charger_was_present = bm->charger_present;
-+ bm->battery_present = !!(status & RETU_REG_STATUS_BATAVAIL);
-+ bm->charger_present = !!(status & RETU_REG_STATUS_CHGPLUG);
-+
-+ if (bm->battery_present != battery_was_present) {
-+ /* Battery state changed */
-+ if (bm->battery_present) {
-+ bm->capacity = n810bm_read_batt_capacity(bm);
-+ if (bm->capacity == N810BM_CAP_UNKNOWN) {
-+ dev_err(&bm->pdev->dev, "Unknown battery detected");
-+ } else {
-+ dev_info(&bm->pdev->dev, "Detected %u mAh battery",
-+ (unsigned int)bm->capacity);
-+ }
-+ } else {
-+ bm->capacity = N810BM_CAP_NONE;
-+ dev_info(&bm->pdev->dev, "The main battery was removed");
-+ //TODO disable charging
-+ }
-+ }
-+
-+ if (bm->charger_present != charger_was_present) {
-+ /* Charger state changed */
-+ dev_info(&bm->pdev->dev, "The charger was %s",
-+ bm->charger_present ? "plugged in" : "removed");
-+ n810bm_notify_charger_present(bm);
-+ }
-+
-+ if ((bm->battery_present && !bm->charger_present) ||
-+ !n810bm_known_battery_present(bm)){
-+ /* We're draining the battery */
-+ mv = n810bm_measure_batt_voltage(bm);
-+ if (mv < 0) {
-+ n810bm_emergency(bm,
-+ "check: Failed to measure voltage");
-+ }
-+ if (mv < N810BM_MIN_VOLTAGE_THRES) {
-+ n810bm_emergency(bm,
-+ "check: Minimum voltage threshold reached");
-+ }
-+ }
-+
-+ if (bm->charger_present && n810bm_known_battery_present(bm)) {
-+ /* Known battery and charger are connected */
-+ if (bm->charger_enabled) {
-+ /* Charger is enabled */
-+ if (!lipocharge_is_charging(&bm->charger)) {
-+ //TODO start charging, if battery is below some threshold
-+ n810bm_start_charge(bm);
-+ }
-+ }
-+ }
-+
-+ if (lipocharge_is_charging(&bm->charger) && !bm->charger_present) {
-+ /* Charger was unplugged. */
-+ n810bm_stop_charge(bm);
-+ }
-+
-+ mutex_unlock(&bm->mutex);
-+ schedule_delayed_work(&bm->periodic_check_work,
-+ round_jiffies_relative(N810BM_CHECK_INTERVAL));
-+}
-+
-+/*XXX
-+static void n810bm_adc_irq_handler(unsigned long data)
-+{
-+ struct n810bm *bm = (struct n810bm *)data;
-+
-+ retu_ack_irq(RETU_INT_ADCS);
-+ //TODO
-+dev_info(&bm->pdev->dev, "ADC interrupt triggered\n");
-+}
-+*/
-+
-+static irqreturn_t n810bm_tahvo_current_measure_irq_handler(int irq, void *data)
-+{
-+ struct n810bm *bm = data;
-+ int res, ma, mv, temp;
-+
-+ mutex_lock(&bm->mutex);
-+ if (!lipocharge_is_charging(&bm->charger))
-+ goto out_unlock;
-+
-+ tahvo_maskset(bm, TAHVO_REG_CHGCTL,
-+ TAHVO_REG_CHGCTL_PWMOVR |
-+ TAHVO_REG_CHGCTL_PWMOVRZERO,
-+ TAHVO_REG_CHGCTL_PWMOVR);
-+ ma = n810bm_measure_batt_current(bm);
-+ tahvo_maskset(bm, TAHVO_REG_CHGCTL,
-+ TAHVO_REG_CHGCTL_PWMOVR |
-+ TAHVO_REG_CHGCTL_PWMOVRZERO,
-+ TAHVO_REG_CHGCTL_PWMOVR |
-+ TAHVO_REG_CHGCTL_PWMOVRZERO);
-+ msleep(10);
-+ mv = n810bm_measure_batt_voltage(bm);
-+ tahvo_maskset(bm, TAHVO_REG_CHGCTL,
-+ TAHVO_REG_CHGCTL_PWMOVR |
-+ TAHVO_REG_CHGCTL_PWMOVRZERO,
-+ 0);
-+ temp = n810bm_measure_batt_temp(bm);
-+ if (WARN_ON(mv < 0))
-+ goto out_unlock;
-+ if (WARN_ON(temp < 0))
-+ goto out_unlock;
-+
-+ if (bm->verbose_charge_log) {
-+ dev_info(&bm->pdev->dev,
-+ "Battery charge state: %d mV, %d mA (%s)",
-+ mv, ma,
-+ (ma <= 0) ? "discharging" : "charging");
-+ }
-+ res = lipocharge_update_state(&bm->charger, mv, ma, temp);
-+ if (res) {
-+ if (res > 0)
-+ dev_info(&bm->pdev->dev, "Battery fully charged");
-+ n810bm_stop_charge(bm);
-+ }
-+out_unlock:
-+ mutex_unlock(&bm->mutex);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+#define DEFINE_ATTR_NOTIFY(attr_name) \
-+ void n810bm_notify_##attr_name(struct n810bm *bm) \
-+ { \
-+ set_bit(N810BM_NOTIFY_##attr_name, &bm->notify_flags); \
-+ wmb(); \
-+ schedule_work(&bm->notify_work); \
-+ }
-+
-+#define DEFINE_SHOW_INT_FUNC(name, member) \
-+ static ssize_t n810bm_attr_##name##_show(struct device *dev, \
-+ struct device_attribute *attr, \
-+ char *buf) \
-+ { \
-+ struct n810bm *bm = device_to_n810bm(dev); \
-+ ssize_t count; \
-+ \
-+ mutex_lock(&bm->mutex); \
-+ count = snprintf(buf, PAGE_SIZE, "%d\n", (int)(bm->member)); \
-+ mutex_unlock(&bm->mutex); \
-+ \
-+ return count; \
-+ }
-+
-+#define DEFINE_STORE_INT_FUNC(name, member) \
-+ static ssize_t n810bm_attr_##name##_store(struct device *dev, \
-+ struct device_attribute *attr,\
-+ const char *buf, size_t count)\
-+ { \
-+ struct n810bm *bm = device_to_n810bm(dev); \
-+ long val; \
-+ int err; \
-+ \
-+ mutex_lock(&bm->mutex); \
-+ err = strict_strtol(buf, 0, &val); \
-+ if (!err) \
-+ bm->member = (typeof(bm->member))val; \
-+ mutex_unlock(&bm->mutex); \
-+ \
-+ return err ? err : count; \
-+ }
-+
-+#define DEFINE_ATTR_SHOW_INT(name, member) \
-+ DEFINE_SHOW_INT_FUNC(name, member) \
-+ static DEVICE_ATTR(name, S_IRUGO, \
-+ n810bm_attr_##name##_show, NULL);
-+
-+#define DEFINE_ATTR_SHOW_STORE_INT(name, member) \
-+ DEFINE_SHOW_INT_FUNC(name, member) \
-+ DEFINE_STORE_INT_FUNC(name, member) \
-+ static DEVICE_ATTR(name, S_IRUGO | S_IWUSR, \
-+ n810bm_attr_##name##_show, \
-+ n810bm_attr_##name##_store);
-+
-+DEFINE_ATTR_SHOW_INT(battery_present, battery_present);
-+DEFINE_ATTR_SHOW_INT(charger_present, charger_present);
-+static DEFINE_ATTR_NOTIFY(charger_present);
-+DEFINE_ATTR_SHOW_INT(charger_state, charger.state);
-+static DEFINE_ATTR_NOTIFY(charger_state);
-+DEFINE_ATTR_SHOW_INT(charger_pwm, active_current_pwm);
-+static DEFINE_ATTR_NOTIFY(charger_pwm);
-+DEFINE_ATTR_SHOW_STORE_INT(charger_enable, charger_enabled);
-+DEFINE_ATTR_SHOW_STORE_INT(charger_verbose, verbose_charge_log);
-+
-+static ssize_t n810bm_attr_battery_level_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct n810bm *bm = device_to_n810bm(dev);
-+ ssize_t count = -ENODEV;
-+ int millivolt;
-+
-+ mutex_lock(&bm->mutex);
-+ if (!bm->battery_present || lipocharge_is_charging(&bm->charger))
-+ millivolt = 0;
-+ else
-+ millivolt = n810bm_measure_batt_voltage(bm);
-+ if (millivolt >= 0) {
-+ count = snprintf(buf, PAGE_SIZE, "%u\n",
-+ n810bm_mvolt2percent(millivolt));
-+ }
-+ mutex_unlock(&bm->mutex);
-+
-+ return count;
-+}
-+static DEVICE_ATTR(battery_level, S_IRUGO,
-+ n810bm_attr_battery_level_show, NULL);
-+
-+static ssize_t n810bm_attr_battery_capacity_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct n810bm *bm = device_to_n810bm(dev);
-+ ssize_t count;
-+ int capacity = 0;
-+
-+ mutex_lock(&bm->mutex);
-+ if (n810bm_known_battery_present(bm))
-+ capacity = (int)bm->capacity;
-+ count = snprintf(buf, PAGE_SIZE, "%d\n", capacity);
-+ mutex_unlock(&bm->mutex);
-+
-+ return count;
-+}
-+static DEVICE_ATTR(battery_capacity, S_IRUGO,
-+ n810bm_attr_battery_capacity_show, NULL);
-+
-+static ssize_t n810bm_attr_battery_temp_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct n810bm *bm = device_to_n810bm(dev);
-+ ssize_t count = -ENODEV;
-+ int k;
-+
-+ mutex_lock(&bm->mutex);
-+ k = n810bm_measure_batt_temp(bm);
-+ if (k >= 0)
-+ count = snprintf(buf, PAGE_SIZE, "%d\n", k);
-+ mutex_unlock(&bm->mutex);
-+
-+ return count;
-+}
-+static DEVICE_ATTR(battery_temp, S_IRUGO,
-+ n810bm_attr_battery_temp_show, NULL);
-+
-+static ssize_t n810bm_attr_charger_voltage_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct n810bm *bm = device_to_n810bm(dev);
-+ ssize_t count = -ENODEV;
-+ int mv = 0;
-+
-+ mutex_lock(&bm->mutex);
-+ if (bm->charger_present)
-+ mv = n810bm_measure_charger_voltage(bm);
-+ if (mv >= 0)
-+ count = snprintf(buf, PAGE_SIZE, "%d\n", mv);
-+ mutex_unlock(&bm->mutex);
-+
-+ return count;
-+}
-+static DEVICE_ATTR(charger_voltage, S_IRUGO,
-+ n810bm_attr_charger_voltage_show, NULL);
-+
-+static ssize_t n810bm_attr_backup_battery_voltage_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct n810bm *bm = device_to_n810bm(dev);
-+ ssize_t count = -ENODEV;
-+ int mv;
-+
-+ mutex_lock(&bm->mutex);
-+ mv = n810bm_measure_backup_batt_voltage(bm);
-+ if (mv >= 0)
-+ count = snprintf(buf, PAGE_SIZE, "%d\n", mv);
-+ mutex_unlock(&bm->mutex);
-+
-+ return count;
-+}
-+static DEVICE_ATTR(backup_battery_voltage, S_IRUGO,
-+ n810bm_attr_backup_battery_voltage_show, NULL);
-+
-+static ssize_t n810bm_attr_battery_current_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct n810bm *bm = device_to_n810bm(dev);
-+ ssize_t count = -ENODEV;
-+ int ma = 0;
-+
-+ mutex_lock(&bm->mutex);
-+ if (bm->battery_present)
-+ ma = n810bm_measure_batt_current_async(bm);
-+ count = snprintf(buf, PAGE_SIZE, "%d\n", ma);
-+ mutex_unlock(&bm->mutex);
-+
-+ return count;
-+}
-+static DEVICE_ATTR(battery_current, S_IRUGO,
-+ n810bm_attr_battery_current_show, NULL);
-+
-+static const struct device_attribute *n810bm_attrs[] = {
-+ &dev_attr_battery_present,
-+ &dev_attr_battery_level,
-+ &dev_attr_battery_current,
-+ &dev_attr_battery_capacity,
-+ &dev_attr_battery_temp,
-+ &dev_attr_backup_battery_voltage,
-+ &dev_attr_charger_present,
-+ &dev_attr_charger_state,
-+ &dev_attr_charger_verbose,
-+ &dev_attr_charger_voltage,
-+ &dev_attr_charger_enable,
-+ &dev_attr_charger_pwm,
-+};
-+
-+static void n810bm_notify_work(struct work_struct *work)
-+{
-+ struct n810bm *bm = container_of(work, struct n810bm, notify_work);
-+ unsigned long notify_flags;
-+
-+ notify_flags = xchg(&bm->notify_flags, 0);
-+ mb();
-+
-+#define do_notify(attr_name) \
-+ do { \
-+ if (notify_flags & (1 << N810BM_NOTIFY_##attr_name)) { \
-+ sysfs_notify(&bm->pdev->dev.kobj, NULL, \
-+ dev_attr_##attr_name.attr.name); \
-+ } \
-+ } while (0)
-+
-+ do_notify(charger_present);
-+ do_notify(charger_state);
-+ do_notify(charger_pwm);
-+}
-+
-+static int n810bm_charger_set_current_pwm(struct lipocharge *c,
-+ unsigned int duty_cycle)
-+{
-+ struct n810bm *bm = container_of(c, struct n810bm, charger);
-+ int err = -EINVAL;
-+
-+ WARN_ON(!mutex_is_locked(&bm->mutex));
-+ if (WARN_ON(duty_cycle > 0xFF))
-+ goto out;
-+ if (WARN_ON(!bm->charger_enabled))
-+ goto out;
-+ if (WARN_ON(!bm->battery_present || !bm->charger_present))
-+ goto out;
-+
-+ if (duty_cycle != bm->active_current_pwm) {
-+ bm->active_current_pwm = duty_cycle;
-+ tahvo_write(bm, TAHVO_REG_CHGCURR, duty_cycle);
-+ n810bm_notify_charger_pwm(bm);
-+ }
-+
-+ err = 0;
-+out:
-+
-+ return err;
-+}
-+
-+static void n810bm_charger_emergency(struct lipocharge *c)
-+{
-+ struct n810bm *bm = container_of(c, struct n810bm, charger);
-+
-+ n810bm_emergency(bm, "Battery charger fault");
-+}
-+
-+static void n810bm_hw_exit(struct n810bm *bm)
-+{
-+ n810bm_stop_charge(bm);
-+ retu_write(bm, RETU_REG_ADCSCR, 0);
-+}
-+
-+static int n810bm_hw_init(struct n810bm *bm)
-+{
-+ int err;
-+
-+ err = n810bm_check_adc_sanity(bm);
-+ if (err)
-+ return err;
-+
-+ n810bm_stop_charge(bm);
-+
-+ return 0;
-+}
-+
-+static void n810bm_cancel_and_flush_work(struct n810bm *bm)
-+{
-+ cancel_delayed_work_sync(&bm->periodic_check_work);
-+ cancel_work_sync(&bm->notify_work);
-+ flush_scheduled_work();
-+}
-+
-+static int n810bm_device_init(struct n810bm *bm)
-+{
-+ int attr_index;
-+ int err;
-+
-+ bm->charger.rate = LIPORATE_p6C;
-+ bm->charger.top_voltage = 4100;
-+ bm->charger.duty_cycle_max = 0xFF;
-+ bm->charger.set_current_pwm = n810bm_charger_set_current_pwm;
-+ bm->charger.emergency = n810bm_charger_emergency;
-+ lipocharge_init(&bm->charger, &bm->pdev->dev);
-+
-+ err = n810bm_hw_init(bm);
-+ if (err)
-+ goto error;
-+ for (attr_index = 0; attr_index < ARRAY_SIZE(n810bm_attrs); attr_index++) {
-+ err = device_create_file(&bm->pdev->dev, n810bm_attrs[attr_index]);
-+ if (err)
-+ goto err_unwind_attrs;
-+ }
-+/*XXX
-+ err = retu_request_irq(RETU_INT_ADCS,
-+ n810bm_adc_irq_handler,
-+ (unsigned long)bm, "n810bm");
-+ if (err)
-+ goto err_unwind_attrs;
-+*/
-+ bm->tahvo_irq = platform_get_irq(n810bm_tahvo_device, 0);
-+ err = request_threaded_irq(bm->tahvo_irq, NULL,
-+ n810bm_tahvo_current_measure_irq_handler,
-+ IRQF_ONESHOT, "tahvo-n810bm", bm);
-+ if (err)
-+ goto err_free_retu_irq;
-+ disable_irq_nosync(bm->tahvo_irq);
-+ bm->tahvo_irq_enabled = 0;
-+
-+ schedule_delayed_work(&bm->periodic_check_work,
-+ round_jiffies_relative(N810BM_CHECK_INTERVAL));
-+
-+ bm->initialized = 1;
-+ dev_info(&bm->pdev->dev, "Battery management initialized");
-+
-+ return 0;
-+
-+err_free_retu_irq:
-+//XXX retu_free_irq(RETU_INT_ADCS);
-+err_unwind_attrs:
-+ for (attr_index--; attr_index >= 0; attr_index--)
-+ device_remove_file(&bm->pdev->dev, n810bm_attrs[attr_index]);
-+/*err_exit:*/
-+ n810bm_hw_exit(bm);
-+error:
-+ n810bm_cancel_and_flush_work(bm);
-+
-+ return err;
-+}
-+
-+static void n810bm_device_exit(struct n810bm *bm)
-+{
-+ int i;
-+
-+ if (!bm->initialized)
-+ return;
-+
-+ lipocharge_exit(&bm->charger);
-+ free_irq(bm->tahvo_irq, bm);
-+//XXX retu_free_irq(RETU_INT_ADCS);
-+ for (i = 0; i < ARRAY_SIZE(n810bm_attrs); i++)
-+ device_remove_file(&bm->pdev->dev, n810bm_attrs[i]);
-+
-+ n810bm_cancel_and_flush_work(bm);
-+
-+ n810bm_hw_exit(bm);
-+
-+ bm->initialized = 0;
-+}
-+
-+static void n810bm_pmm_block_found(const struct firmware *fw, void *context)
-+{
-+ struct n810bm *bm = context;
-+ int err;
-+
-+ if (!fw) {
-+ dev_err(&bm->pdev->dev,
-+ "CAL PMM block image file not found");
-+ goto err_release;
-+ }
-+ if (fw->size != N810BM_PMM_BLOCK_SIZE ||
-+ memcmp(fw->data, "BME-PMM-BLOCK01", 15) != 0) {
-+ dev_err(&bm->pdev->dev,
-+ "CAL PMM block image file has an invalid format");
-+ goto err_release;
-+ }
-+
-+ err = n810bm_parse_pmm_block(bm, fw);
-+ if (err)
-+ goto err_release;
-+ release_firmware(fw);
-+
-+ err = n810bm_device_init(bm);
-+ if (err) {
-+ dev_err(&bm->pdev->dev,
-+ "Failed to initialized battery management (%d)", err);
-+ goto error;
-+ }
-+
-+ return;
-+err_release:
-+ release_firmware(fw);
-+error:
-+ return;
-+}
-+
-+static int __devinit n810bm_probe(void)
-+{
-+ struct n810bm *bm;
-+ int err;
-+
-+ if (!n810bm_retu_device || !n810bm_tahvo_device)
-+ return 0;
-+
-+ bm = kzalloc(sizeof(*bm), GFP_KERNEL);
-+ if (!bm)
-+ return -ENOMEM;
-+ bm->pdev = n810bm_retu_device;
-+ platform_set_drvdata(n810bm_retu_device, bm);
-+ platform_set_drvdata(n810bm_tahvo_device, bm);
-+ mutex_init(&bm->mutex);
-+ INIT_DELAYED_WORK(&bm->periodic_check_work, n810bm_periodic_check_work);
-+ INIT_WORK(&bm->notify_work, n810bm_notify_work);
-+
-+ dev_info(&bm->pdev->dev, "Requesting CAL BME PMM block firmware file "
-+ N810BM_PMM_BLOCK_FILENAME);
-+ err = request_firmware_nowait(THIS_MODULE, 1,
-+ N810BM_PMM_BLOCK_FILENAME,
-+ &bm->pdev->dev, GFP_KERNEL,
-+ bm, n810bm_pmm_block_found);
-+ if (err) {
-+ dev_err(&bm->pdev->dev,
-+ "Failed to request CAL PMM block image file (%d)", err);
-+ goto err_free;
-+ }
-+
-+ return 0;
-+
-+err_free:
-+ kfree(bm);
-+
-+ return err;
-+}
-+
-+static void __devexit n810bm_remove(void)
-+{
-+ struct n810bm *bm;
-+
-+ if (!n810bm_retu_device || !n810bm_tahvo_device)
-+ return;
-+ bm = platform_get_drvdata(n810bm_retu_device);
-+
-+ n810bm_device_exit(bm);
-+
-+ kfree(bm);
-+ platform_set_drvdata(n810bm_retu_device, NULL);
-+ platform_set_drvdata(n810bm_tahvo_device, NULL);
-+}
-+
-+static int __devinit n810bm_retu_probe(struct platform_device *pdev)
-+{
-+ n810bm_retu_device = pdev;
-+ return n810bm_probe();
-+}
-+
-+static int __devexit n810bm_retu_remove(struct platform_device *pdev)
-+{
-+ n810bm_remove();
-+ n810bm_retu_device = NULL;
-+ return 0;
-+}
-+
-+static int __devinit n810bm_tahvo_probe(struct platform_device *pdev)
-+{
-+ n810bm_tahvo_device = pdev;
-+ return n810bm_probe();
-+}
-+
-+static int __devexit n810bm_tahvo_remove(struct platform_device *pdev)
-+{
-+ n810bm_remove();
-+ n810bm_tahvo_device = NULL;
-+ return 0;
-+}
-+
-+static struct platform_driver n810bm_retu_driver = {
-+ .remove = __devexit_p(n810bm_retu_remove),
-+ .driver = {
-+ .name = "retu-n810bm",
-+ }
-+};
-+
-+static struct platform_driver n810bm_tahvo_driver = {
-+ .remove = __devexit_p(n810bm_tahvo_remove),
-+ .driver = {
-+ .name = "tahvo-n810bm",
-+ }
-+};
-+
-+static int __init n810bm_modinit(void)
-+{
-+ int err;
-+
-+ err = platform_driver_probe(&n810bm_retu_driver, n810bm_retu_probe);
-+ if (err)
-+ return err;
-+ err = platform_driver_probe(&n810bm_tahvo_driver, n810bm_tahvo_probe);
-+ if (err) {
-+ platform_driver_unregister(&n810bm_retu_driver);
-+ return err;
-+ }
-+
-+ return 0;
-+}
-+module_init(n810bm_modinit);
-+
-+static void __exit n810bm_modexit(void)
-+{
-+ platform_driver_unregister(&n810bm_tahvo_driver);
-+ platform_driver_unregister(&n810bm_retu_driver);
-+}
-+module_exit(n810bm_modexit);
-+
-+MODULE_DESCRIPTION("Nokia n810 battery management");
-+MODULE_FIRMWARE(N810BM_PMM_BLOCK_FILENAME);
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Michael Buesch");
---- /dev/null
-+++ b/drivers/cbus/lipocharge.c
-@@ -0,0 +1,183 @@
-+/*
-+ * Generic LIPO battery charger
-+ *
-+ * Copyright (c) 2010-2011 Michael Buesch <mb@bu3sch.de>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#define DEBUG
-+
-+#include "lipocharge.h"
-+
-+#include <linux/slab.h>
-+
-+
-+/* Hysteresis constants */
-+#define CURRENT_HYST 30 /* mA */
-+#define VOLTAGE_HYST 10 /* mV */
-+
-+/* Threshold constants */
-+#define FINISH_CURRENT_PERCENT 3
-+
-+
-+/* Returns the requested first-stage charge current in mA */
-+static inline unsigned int get_stage1_charge_current(struct lipocharge *c)
-+{
-+ /* current = (capacity * C) */
-+ return c->capacity * c->rate / 1000;
-+}
-+
-+void lipocharge_init(struct lipocharge *c, struct device *dev)
-+{
-+ c->dev = dev;
-+ c->state = LIPO_IDLE;
-+}
-+
-+void lipocharge_exit(struct lipocharge *c)
-+{
-+ c->state = LIPO_IDLE;
-+}
-+
-+int lipocharge_start(struct lipocharge *c)
-+{
-+ int err;
-+
-+ if (c->state != LIPO_IDLE)
-+ return -EBUSY;
-+ if (!c->set_current_pwm || !c->emergency)
-+ return -EINVAL;
-+ if (!c->top_voltage || c->top_voltage > 4200)
-+ return -EINVAL;
-+
-+ c->active_duty_cycle = 0;
-+ err = c->set_current_pwm(c, c->active_duty_cycle);
-+ if (err)
-+ return err;
-+ c->state = LIPO_FIRST_STAGE;
-+
-+ return 0;
-+}
-+
-+void lipocharge_stop(struct lipocharge *c)
-+{
-+ if (c->state == LIPO_IDLE)
-+ return;
-+ c->state = LIPO_IDLE;
-+}
-+
-+static int lipocharge_increase_current(struct lipocharge *c,
-+ unsigned int inc_permille)
-+{
-+ int old_pwm, new_pwm;
-+
-+ if (c->active_duty_cycle >= c->duty_cycle_max)
-+ return 0;
-+
-+ old_pwm = c->active_duty_cycle;
-+ new_pwm = old_pwm + (c->duty_cycle_max * inc_permille / 1000);
-+ new_pwm = min(new_pwm, (int)c->duty_cycle_max);
-+ c->active_duty_cycle = new_pwm;
-+
-+ dev_dbg(c->dev, "lipo: Increasing duty_cycle by "
-+ "%u permille (0x%02X -> 0x%02X)",
-+ inc_permille, old_pwm, new_pwm);
-+
-+ return c->set_current_pwm(c, c->active_duty_cycle);
-+}
-+
-+static int lipocharge_decrease_current(struct lipocharge *c,
-+ unsigned int dec_permille)
-+{
-+ int old_pwm, new_pwm;
-+
-+ if (c->active_duty_cycle <= 0)
-+ return 0;
-+
-+ old_pwm = c->active_duty_cycle;
-+ new_pwm = old_pwm - (c->duty_cycle_max * dec_permille / 1000);
-+ new_pwm = max(0, new_pwm);
-+ c->active_duty_cycle = new_pwm;
-+
-+ dev_dbg(c->dev, "lipo: Decreasing duty_cycle by "
-+ "%u permille (0x%02X -> 0x%02X)",
-+ dec_permille, old_pwm, new_pwm);
-+
-+ return c->set_current_pwm(c, c->active_duty_cycle);
-+}
-+
-+/** lipocharge_update_state - Update the charge state
-+ * @c: The context.
-+ * @voltage_mV: The measured battery voltage.
-+ * @current_mA: The measured charge current.
-+ * negative -> drain.
-+ * positive -> charge.
-+ * @temp_K: Battery temperature in K.
-+ *
-+ * Returns 0 on success, -1 on error.
-+ * Returns 1, if the charging process is finished.
-+ */
-+int lipocharge_update_state(struct lipocharge *c,
-+ unsigned int voltage_mV,
-+ int current_mA,
-+ unsigned int temp_K)
-+{
-+ int requested_current, current_diff;
-+ int err;
-+ unsigned int permille;
-+
-+ //TODO temp
-+
-+restart:
-+ switch (c->state) {
-+ case LIPO_IDLE:
-+ dev_err(c->dev, "%s: called while idle", __func__);
-+ return -EINVAL;
-+ case LIPO_FIRST_STAGE: /* Constant current */
-+//printk("GOT %u %d %u\n", voltage_mV, current_mA, temp_K);
-+ if (voltage_mV >= c->top_voltage) {
-+ /* Float voltage reached.
-+ * Switch charger mode to "constant current" */
-+ c->state = LIPO_SECOND_STAGE;
-+ dev_dbg(c->dev, "Switched to second charging stage.");
-+ goto restart;
-+ }
-+ /* Float voltage not reached, yet.
-+ * Try to get the requested constant current. */
-+ requested_current = get_stage1_charge_current(c);
-+ if (current_mA < 0)
-+ current_mA = 0;
-+ current_diff = requested_current - current_mA;
-+ if (abs(requested_current - current_mA) > CURRENT_HYST) {
-+ if (current_diff > 0) {
-+ /* Increase current */
-+ permille = current_diff * 1000 / requested_current;
-+ permille /= 2;
-+ err = lipocharge_increase_current(c, permille);
-+ if (err)
-+ return err;
-+ } else {
-+ /* Decrease current */
-+ permille = (-current_diff) * 1000 / requested_current;
-+ permille /= 2;
-+ err = lipocharge_decrease_current(c, permille);
-+ if (err)
-+ return err;
-+ }
-+ }
-+ break;
-+ case LIPO_SECOND_STAGE: /* Constant voltage */
-+ //TODO
-+ break;
-+ }
-+
-+ return 0;
-+}
---- /dev/null
-+++ b/drivers/cbus/lipocharge.h
-@@ -0,0 +1,60 @@
-+#ifndef LIPOCHARGE_H_
-+#define LIPOCHARGE_H_
-+
-+#include <linux/types.h>
-+#include <linux/device.h>
-+
-+
-+#define LIPORATE(a,b) (((a) * 1000) + ((b) * 100))
-+#define LIPORATE_p6C LIPORATE(0,6) /* 0.6C */
-+
-+enum lipocharge_state {
-+ LIPO_IDLE = 0, /* Not charging */
-+ LIPO_FIRST_STAGE, /* Charging: constant current */
-+ LIPO_SECOND_STAGE, /* Charging: constant voltage */
-+};
-+
-+/** struct lipocharge - A generic LIPO charger
-+ *
-+ * @capacity: Battery capacity in mAh.
-+ * @rate: Charge rate.
-+ * @top_voltage: Fully charged voltage, in mV.
-+ * @duty_cycle_max: Max value for duty_cycle.
-+ *
-+ * @set_charge_current: Set the charge current PWM duty cycle.
-+ * @emergency: Something went wrong. Force shutdown.
-+ */
-+struct lipocharge {
-+ unsigned int capacity;
-+ unsigned int rate;
-+ unsigned int top_voltage;
-+ unsigned int duty_cycle_max;
-+
-+ int (*set_current_pwm)(struct lipocharge *c, unsigned int duty_cycle);
-+ void (*emergency)(struct lipocharge *c);
-+
-+ /* internal */
-+ struct device *dev;
-+ enum lipocharge_state state;
-+ unsigned int active_duty_cycle;
-+
-+ //TODO implement timer to cut power after maximum charge time.
-+};
-+
-+void lipocharge_init(struct lipocharge *c, struct device *dev);
-+void lipocharge_exit(struct lipocharge *c);
-+
-+int lipocharge_start(struct lipocharge *c);
-+void lipocharge_stop(struct lipocharge *c);
-+
-+int lipocharge_update_state(struct lipocharge *c,
-+ unsigned int voltage_mV,
-+ int current_mA,
-+ unsigned int temp_K);
-+
-+static inline bool lipocharge_is_charging(struct lipocharge *c)
-+{
-+ return (c->state != LIPO_IDLE);
-+}
-+
-+#endif /* LIPOCHARGE_H_ */
---- a/drivers/cbus/cbus.c
-+++ b/drivers/cbus/cbus.c
-@@ -36,6 +36,7 @@
- #include <linux/gpio.h>
- #include <linux/platform_device.h>
- #include <linux/platform_data/cbus.h>
-+#include <linux/reboot.h>
-
- #include "cbus.h"
-
-@@ -326,6 +327,13 @@ static void __exit cbus_bus_exit(void)
- }
- module_exit(cbus_bus_exit);
-
-+void cbus_emergency(void)
-+{
-+ machine_power_off();
-+ panic("cbus: Failed to halt machine in emergency state\n");
-+}
-+EXPORT_SYMBOL(cbus_emergency);
-+
- MODULE_DESCRIPTION("CBUS serial protocol");
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Juha Yrjölä");
---- a/drivers/cbus/cbus.h
-+++ b/drivers/cbus/cbus.h
-@@ -27,4 +27,6 @@ extern int cbus_read_reg(struct device *
- extern int cbus_write_reg(struct device *, unsigned dev, unsigned reg,
- unsigned val);
-
-+void cbus_emergency(void) __noreturn;
-+
- #endif /* __DRIVERS_CBUS_CBUS_H */
---- a/drivers/cbus/retu.c
-+++ b/drivers/cbus/retu.c
-@@ -399,6 +399,11 @@ static int retu_allocate_children(struct
- if (!child)
- return -ENOMEM;
-
-+ child = retu_allocate_child("retu-n810bm", parent, irq_base,
-+ RETU_INT_ADCS, -1, 1);
-+ if (!child)
-+ return -ENOMEM;
-+
- return 0;
- }
-
---- a/drivers/cbus/tahvo.c
-+++ b/drivers/cbus/tahvo.c
-@@ -129,6 +129,7 @@ void tahvo_set_clear_reg_bits(struct dev
- __tahvo_write_reg(tahvo, reg, w);
- mutex_unlock(&tahvo->mutex);
- }
-+EXPORT_SYMBOL(tahvo_set_clear_reg_bits);
-
- static irqreturn_t tahvo_irq_handler(int irq, void *_tahvo)
- {
-@@ -292,6 +293,11 @@ static int tahvo_allocate_children(struc
- if (!child)
- return -ENOMEM;
-
-+ child = tahvo_allocate_child("tahvo-n810bm", parent,
-+ irq_base + TAHVO_INT_BATCURR);
-+ if (!child)
-+ return -ENOMEM;
-+
- return 0;
- }
-
+++ /dev/null
---- a/arch/arm/plat-omap/omap_device.c
-+++ b/arch/arm/plat-omap/omap_device.c
-@@ -619,7 +619,7 @@ static void omap_device_delete(struct om
- * information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
- * passes along the return value of omap_device_build_ss().
- */
--struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
-+struct platform_device *__init omap_device_build(const char *pdev_name, int pdev_id,
- struct omap_hwmod *oh, void *pdata,
- int pdata_len,
- struct omap_device_pm_latency *pm_lats,
-@@ -652,7 +652,7 @@ struct platform_device *omap_device_buil
- * platform_device record. Returns an ERR_PTR() on error, or passes
- * along the return value of omap_device_register().
- */
--struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
-+struct platform_device *__init omap_device_build_ss(const char *pdev_name, int pdev_id,
- struct omap_hwmod **ohs, int oh_cnt,
- void *pdata, int pdata_len,
- struct omap_device_pm_latency *pm_lats,
-@@ -717,7 +717,7 @@ odbs_exit:
- * platform_early_add_device() on the underlying platform_device.
- * Returns 0 by default.
- */
--static int omap_early_device_register(struct platform_device *pdev)
-+static int __init omap_early_device_register(struct platform_device *pdev)
- {
- struct platform_device *devices[1];
-
---- a/arch/arm/plat-omap/common.c
-+++ b/arch/arm/plat-omap/common.c
-@@ -29,7 +29,7 @@
-
- #define NO_LENGTH_CHECK 0xffffffff
-
--struct omap_board_config_kernel *omap_board_config __initdata;
-+struct omap_board_config_kernel *omap_board_config;
- int omap_board_config_size;
-
- unsigned char omap_bootloader_tag[1024];
-@@ -58,7 +58,7 @@ __tagtable(ATAG_BOARD, parse_tag_omap);
-
- #endif
-
--static const void *__init get_config(u16 tag, size_t len,
-+static const void *get_config(u16 tag, size_t len,
- int skip, size_t *len_out)
- {
- struct omap_board_config_kernel *kinfo = NULL;
-@@ -125,12 +125,12 @@ static const void *__init get_config(u16
- return kinfo->data;
- }
-
--const void *__init __omap_get_config(u16 tag, size_t len, int nr)
-+const void *__omap_get_config(u16 tag, size_t len, int nr)
- {
- return get_config(tag, len, nr, NULL);
- }
-
--const void *__init omap_get_var_config(u16 tag, size_t *len)
-+const void *omap_get_var_config(u16 tag, size_t *len)
- {
- return get_config(tag, NO_LENGTH_CHECK, 0, len);
- }
---- a/arch/arm/mach-omap2/devices.c
-+++ b/arch/arm/mach-omap2/devices.c
-@@ -380,7 +380,7 @@ static inline void omap_init_dmic(void)
-
- #include <plat/mcspi.h>
-
--static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
-+static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused)
- {
- struct platform_device *pdev;
- char *name = "omap2_mcspi";
---- a/arch/arm/mach-omap2/gpio.c
-+++ b/arch/arm/mach-omap2/gpio.c
-@@ -24,7 +24,7 @@
- #include <plat/omap_hwmod.h>
- #include <plat/omap_device.h>
-
--static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
-+static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
- {
- struct platform_device *pdev;
- struct omap_gpio_platform_data *pdata;
---- a/arch/arm/mach-omap2/mcbsp.c
-+++ b/arch/arm/mach-omap2/mcbsp.c
-@@ -122,7 +122,7 @@ static int omap3_enable_st_clock(unsigne
- return 0;
- }
-
--static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
-+static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
- {
- int id, count = 1;
- char *name = "omap-mcbsp";
---- a/arch/arm/plat-omap/include/plat/board.h
-+++ b/arch/arm/plat-omap/include/plat/board.h
-@@ -159,14 +159,14 @@ struct omap_gpio_switch_config {
- int key_code:24; /* Linux key code */
- };
-
--extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
-+extern const void * __omap_get_config(u16 tag, size_t len, int nr);
-
- #define omap_get_config(tag, type) \
- ((const type *) __omap_get_config((tag), sizeof(type), 0))
- #define omap_get_nr_config(tag, type, nr) \
- ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
-
--extern const void *__init omap_get_var_config(u16 tag, size_t *len);
-+extern const void * omap_get_var_config(u16 tag, size_t *len);
-
- extern struct omap_board_config_kernel *omap_board_config;
- extern int omap_board_config_size;
projects / openwrt / openwrt.git / commitdiff