also take over the files for 2.6.31
authorMirko Vogt <mirko@openwrt.org>
Sun, 23 Aug 2009 12:00:58 +0000 (12:00 +0000)
committerMirko Vogt <mirko@openwrt.org>
Sun, 23 Aug 2009 12:00:58 +0000 (12:00 +0000)
SVN-Revision: 17356

target/linux/generic-2.6/files-2.6.31/drivers/char/gpio_dev.c [new file with mode: 0644]
target/linux/generic-2.6/files-2.6.31/drivers/input/misc/gpio_buttons.c [new file with mode: 0644]
target/linux/generic-2.6/files-2.6.31/drivers/leds/leds-alix.c [new file with mode: 0644]
target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-morse.c [new file with mode: 0644]
target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-netdev.c [new file with mode: 0644]
target/linux/generic-2.6/files-2.6.31/drivers/net/phy/ar8216.c [new file with mode: 0644]
target/linux/generic-2.6/files-2.6.31/drivers/net/phy/mvswitch.c [new file with mode: 0644]
target/linux/generic-2.6/files-2.6.31/include/linux/glamo-engine.h [new file with mode: 0644]
target/linux/generic-2.6/files-2.6.31/include/linux/glamofb.h [new file with mode: 0644]
target/linux/generic-2.6/files-2.6.31/include/linux/gpio_buttons.h [new file with mode: 0644]
target/linux/generic-2.6/files-2.6.31/include/linux/gpio_dev.h [new file with mode: 0644]

diff --git a/target/linux/generic-2.6/files-2.6.31/drivers/char/gpio_dev.c b/target/linux/generic-2.6/files-2.6.31/drivers/char/gpio_dev.c
new file mode 100644 (file)
index 0000000..8392fcf
--- /dev/null
@@ -0,0 +1,201 @@
+/*
+ * character device wrapper for generic gpio layer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA02111-1307USA
+ *
+ * Feedback, Bugs...  blogic@openwrt.org
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/atomic.h>
+#include <linux/init.h>
+#include <linux/genhd.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/gpio_dev.h>
+
+#define DRVNAME                "gpiodev"
+#define DEVNAME                "gpio"
+
+static int dev_major;
+static unsigned int gpio_access_mask;
+static struct class *gpiodev_class;
+
+/* Counter is 1, if the device is not opened and zero (or less) if opened. */
+static atomic_t gpio_open_cnt = ATOMIC_INIT(1);
+
+static int
+gpio_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg)
+{
+       int retval = 0;
+
+       if (((1 << arg) & gpio_access_mask) != (1 << arg))
+       {
+               retval = -EINVAL;
+               goto out;
+       }
+
+       switch (cmd)
+       {
+       case GPIO_GET:
+               retval = gpio_get_value(arg);
+               break;
+
+       case GPIO_SET:
+               gpio_set_value(arg, 1);
+               break;
+
+       case GPIO_CLEAR:
+               gpio_set_value(arg, 0);
+               break;
+
+       case GPIO_DIR_IN:
+               gpio_direction_input(arg);
+               break;
+
+       case GPIO_DIR_OUT:
+               gpio_direction_output(arg, 0);
+               break;
+
+       default:
+               retval = -EINVAL;
+               break;
+       }
+
+out:
+       return retval;
+}
+
+static int
+gpio_open(struct inode *inode, struct file *file)
+{
+       int result = 0;
+       unsigned int dev_minor = MINOR(inode->i_rdev);
+
+       if (dev_minor != 0)
+       {
+               printk(KERN_ERR DRVNAME ": trying to access unknown minor device -> %d\n", dev_minor);
+               result = -ENODEV;
+               goto out;
+       }
+
+       /* FIXME: We should really allow multiple applications to open the device
+        *        at the same time, as long as the apps access different IO pins.
+        *        The generic gpio-registration functions can be used for that.
+        *        Two new IOCTLs have to be introduced for that. Need to check userspace
+        *        compatibility first. --mb */
+       if (!atomic_dec_and_test(&gpio_open_cnt)) {
+               atomic_inc(&gpio_open_cnt);
+               printk(KERN_ERR DRVNAME ": Device with minor ID %d already in use\n", dev_minor);
+               result = -EBUSY;
+               goto out;
+       }
+
+out:
+       return result;
+}
+
+static int
+gpio_close(struct inode * inode, struct file * file)
+{
+       smp_mb__before_atomic_inc();
+       atomic_inc(&gpio_open_cnt);
+
+       return 0;
+}
+
+struct file_operations gpio_fops = {
+       ioctl:          gpio_ioctl,
+       open:           gpio_open,
+       release:        gpio_close
+};
+
+static int
+gpio_probe(struct platform_device *dev)
+{
+       int result = 0;
+
+       dev_major = register_chrdev(0, DEVNAME, &gpio_fops);
+       if (!dev_major)
+       {
+               printk(KERN_ERR DRVNAME ": Error whilst opening %s \n", DEVNAME);
+               result = -ENODEV;
+               goto out;
+       }
+
+       gpiodev_class = class_create(THIS_MODULE, DRVNAME);
+       device_create(gpiodev_class, NULL, MKDEV(dev_major, 0), dev, DEVNAME);
+
+       printk(KERN_INFO DRVNAME ": gpio device registered with major %d\n", dev_major);
+
+       if (dev->num_resources != 1)
+       {
+               printk(KERN_ERR DRVNAME ": device may only have 1 resource\n");
+               result = -ENODEV;
+               goto out;
+       }
+
+       gpio_access_mask = dev->resource[0].start;
+
+       printk(KERN_INFO DRVNAME ": gpio platform device registered with access mask %08X\n", gpio_access_mask);
+out:
+       return result;
+}
+
+static int
+gpio_remove(struct platform_device *dev)
+{
+       unregister_chrdev(dev_major, DEVNAME);
+       return 0;
+}
+
+static struct
+platform_driver gpio_driver = {
+       .probe = gpio_probe,
+       .remove = gpio_remove,
+       .driver = {
+               .name = "GPIODEV",
+               .owner = THIS_MODULE,
+       },
+};
+
+static int __init
+gpio_mod_init(void)
+{
+       int ret = platform_driver_register(&gpio_driver);
+       if (ret)
+               printk(KERN_INFO DRVNAME ": Error registering platfom driver!");
+
+       return ret;
+}
+
+static void __exit
+gpio_mod_exit(void)
+{
+       platform_driver_unregister(&gpio_driver);
+}
+
+module_init (gpio_mod_init);
+module_exit (gpio_mod_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin / OpenWrt");
+MODULE_DESCRIPTION("Character device for for generic gpio api");
diff --git a/target/linux/generic-2.6/files-2.6.31/drivers/input/misc/gpio_buttons.c b/target/linux/generic-2.6/files-2.6.31/drivers/input/misc/gpio_buttons.c
new file mode 100644 (file)
index 0000000..83a8178
--- /dev/null
@@ -0,0 +1,209 @@
+/*
+ *  Driver for buttons on GPIO lines not capable of generating interrupts
+ *
+ *  Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This file was based on: /drivers/input/misc/cobalt_btns.c
+ *     Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  also was based on: /drivers/input/keyboard/gpio_keys.c
+ *     Copyright 2005 Phil Blundell
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <linux/gpio_buttons.h>
+
+#include <asm/gpio.h>
+
+#define DRV_NAME       "gpio-buttons"
+#define DRV_VERSION    "0.1.1"
+#define PFX            DRV_NAME ": "
+
+struct gpio_buttons_dev {
+       struct input_polled_dev *poll_dev;
+       struct gpio_buttons_platform_data *pdata;
+};
+
+static void gpio_buttons_poll(struct input_polled_dev *dev)
+{
+       struct gpio_buttons_dev *bdev = dev->private;
+       struct gpio_buttons_platform_data *pdata = bdev->pdata;
+       struct input_dev *input = dev->input;
+       int i;
+
+       for (i = 0; i < bdev->pdata->nbuttons; i++) {
+               struct gpio_button *button = &pdata->buttons[i];
+               unsigned int type = button->type ?: EV_KEY;
+               int state;
+
+               state = gpio_get_value(button->gpio) ? 1 : 0;
+               state ^= button->active_low;
+
+               if (state) {
+                       button->count++;
+               } else {
+                       if (button->count >= button->threshold) {
+                               input_event(input, type, button->code, 1);
+                               input_sync(input);
+                       }
+                       button->count = 0;
+               }
+
+               if (button->count == button->threshold) {
+                       input_event(input, type, button->code, 0);
+                       input_sync(input);
+               }
+       }
+}
+
+static int __devinit gpio_buttons_probe(struct platform_device *pdev)
+{
+       struct gpio_buttons_platform_data *pdata = pdev->dev.platform_data;
+       struct gpio_buttons_dev *bdev;
+       struct input_polled_dev *poll_dev;
+       struct input_dev *input;
+       int error, i;
+
+
+       if (!pdata)
+               return -ENXIO;
+
+       bdev = kzalloc(sizeof(*bdev), GFP_KERNEL);
+       if (!bdev) {
+               printk(KERN_ERR DRV_NAME "no memory for device\n");
+               return -ENOMEM;
+       }
+
+       poll_dev = input_allocate_polled_device();
+       if (!poll_dev) {
+               printk(KERN_ERR DRV_NAME "no memory for polled device\n");
+               error = -ENOMEM;
+               goto err_free_bdev;
+       }
+
+       poll_dev->private = bdev;
+       poll_dev->poll = gpio_buttons_poll;
+       poll_dev->poll_interval = pdata->poll_interval;
+
+       input = poll_dev->input;
+
+       input->evbit[0] = BIT(EV_KEY);
+       input->name = pdev->name;
+       input->phys = "gpio-buttons/input0";
+       input->dev.parent = &pdev->dev;
+
+       input->id.bustype = BUS_HOST;
+       input->id.vendor = 0x0001;
+       input->id.product = 0x0001;
+       input->id.version = 0x0100;
+
+       for (i = 0; i < pdata->nbuttons; i++) {
+               struct gpio_button *button = &pdata->buttons[i];
+               unsigned int gpio = button->gpio;
+               unsigned int type = button->type ?: EV_KEY;
+
+               error = gpio_request(gpio, button->desc ?
+                               button->desc : DRV_NAME);
+               if (error) {
+                       printk(KERN_ERR PFX "unable to claim gpio %u, "
+                               "error %d\n", gpio, error);
+                       goto err_free_gpio;
+               }
+
+               error = gpio_direction_input(gpio);
+               if (error) {
+                       printk(KERN_ERR PFX "unable to set direction on "
+                               "gpio %u, error %d\n", gpio, error);
+                       goto err_free_gpio;
+               }
+
+               input_set_capability(input, type, button->code);
+               button->count = 0;
+       }
+
+       bdev->poll_dev = poll_dev;
+       bdev->pdata = pdata;
+       platform_set_drvdata(pdev, bdev);
+
+       error = input_register_polled_device(poll_dev);
+       if (error) {
+               printk(KERN_ERR PFX "unable to register polled device, "
+                       "error %d\n", error);
+               goto err_free_gpio;
+       }
+
+       return 0;
+
+err_free_gpio:
+       for (i = i - 1; i >= 0; i--)
+               gpio_free(pdata->buttons[i].gpio);
+
+       input_free_polled_device(poll_dev);
+
+err_free_bdev:
+       kfree(bdev);
+
+       platform_set_drvdata(pdev, NULL);
+       return error;
+}
+
+static int __devexit gpio_buttons_remove(struct platform_device *pdev)
+{
+       struct gpio_buttons_dev *bdev = platform_get_drvdata(pdev);
+       struct gpio_buttons_platform_data *pdata = bdev->pdata;
+       int i;
+
+       input_unregister_polled_device(bdev->poll_dev);
+
+       for (i = 0; i < pdata->nbuttons; i++)
+               gpio_free(pdata->buttons[i].gpio);
+
+       input_free_polled_device(bdev->poll_dev);
+
+       kfree(bdev);
+       platform_set_drvdata(pdev, NULL);
+
+       return 0;
+}
+
+static struct platform_driver gpio_buttons_driver = {
+       .probe  = gpio_buttons_probe,
+       .remove = __devexit_p(gpio_buttons_remove),
+       .driver = {
+               .name   = DRV_NAME,
+               .owner  = THIS_MODULE,
+       },
+};
+
+static int __init gpio_buttons_init(void)
+{
+       printk(KERN_INFO DRV_NAME " driver version " DRV_VERSION "\n");
+       return platform_driver_register(&gpio_buttons_driver);
+}
+
+static void __exit gpio_buttons_exit(void)
+{
+       platform_driver_unregister(&gpio_buttons_driver);
+}
+
+module_init(gpio_buttons_init);
+module_exit(gpio_buttons_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Polled buttons driver for CPU GPIOs");
+
diff --git a/target/linux/generic-2.6/files-2.6.31/drivers/leds/leds-alix.c b/target/linux/generic-2.6/files-2.6.31/drivers/leds/leds-alix.c
new file mode 100644 (file)
index 0000000..103ca7d
--- /dev/null
@@ -0,0 +1,172 @@
+/*
+ * LEDs driver for PCEngines ALIX 2/3 series
+ *
+ * Copyright (C) 2007 Petr Liebman
+ *
+ * Based on leds-wrap.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <asm/io.h>
+
+#define DRVNAME "alix-led"
+
+#define ALIX_LED1_PORT         (0x6100)
+#define ALIX_LED1_ON           (1<<22)
+#define ALIX_LED1_OFF          (1<<6)
+
+#define ALIX_LED2_PORT         (0x6180)
+#define ALIX_LED2_ON           (1<<25)
+#define ALIX_LED2_OFF          (1<<9)
+
+#define ALIX_LED3_PORT         (0x6180)
+#define ALIX_LED3_ON           (1<<27)
+#define ALIX_LED3_OFF          (1<<11)
+
+
+static struct platform_device *pdev;
+
+static void alix_led_set_1(struct led_classdev *led_cdev,
+               enum led_brightness value)
+{
+       if (value)
+               outl(ALIX_LED1_ON, ALIX_LED1_PORT);
+       else
+               outl(ALIX_LED1_OFF, ALIX_LED1_PORT);
+}
+
+static void alix_led_set_2(struct led_classdev *led_cdev,
+               enum led_brightness value)
+{
+       if (value)
+               outl(ALIX_LED2_ON, ALIX_LED2_PORT);
+       else
+               outl(ALIX_LED2_OFF, ALIX_LED2_PORT);
+}
+
+static void alix_led_set_3(struct led_classdev *led_cdev,
+               enum led_brightness value)
+{
+       if (value)
+               outl(ALIX_LED3_ON, ALIX_LED3_PORT);
+       else
+               outl(ALIX_LED3_OFF, ALIX_LED3_PORT);
+}
+
+static struct led_classdev alix_led_1 = {
+       .name           = "alix:1",
+       .brightness_set = alix_led_set_1,
+};
+
+static struct led_classdev alix_led_2 = {
+       .name           = "alix:2",
+       .brightness_set = alix_led_set_2,
+};
+
+static struct led_classdev alix_led_3 = {
+       .name           = "alix:3",
+       .brightness_set = alix_led_set_3,
+};
+
+
+#ifdef CONFIG_PM
+static int alix_led_suspend(struct platform_device *dev,
+               pm_message_t state)
+{
+       led_classdev_suspend(&alix_led_1);
+       led_classdev_suspend(&alix_led_2);
+       led_classdev_suspend(&alix_led_3);
+       return 0;
+}
+
+static int alix_led_resume(struct platform_device *dev)
+{
+       led_classdev_resume(&alix_led_1);
+       led_classdev_resume(&alix_led_2);
+       led_classdev_resume(&alix_led_3);
+       return 0;
+}
+#else
+#define alix_led_suspend NULL
+#define alix_led_resume NULL
+#endif
+
+static int alix_led_probe(struct platform_device *pdev)
+{
+       int ret;
+
+       ret = led_classdev_register(&pdev->dev, &alix_led_1);
+       if (ret >= 0)
+       {
+               ret = led_classdev_register(&pdev->dev, &alix_led_2);
+               if (ret >= 0)
+               {
+                       ret = led_classdev_register(&pdev->dev, &alix_led_3);
+                       if (ret < 0)
+                               led_classdev_unregister(&alix_led_2);
+               }
+               if (ret < 0)
+                       led_classdev_unregister(&alix_led_1);
+       }
+       return ret;
+}
+
+static int alix_led_remove(struct platform_device *pdev)
+{
+       led_classdev_unregister(&alix_led_1);
+       led_classdev_unregister(&alix_led_2);
+       led_classdev_unregister(&alix_led_3);
+       return 0;
+}
+
+static struct platform_driver alix_led_driver = {
+       .probe          = alix_led_probe,
+       .remove         = alix_led_remove,
+       .suspend        = alix_led_suspend,
+       .resume         = alix_led_resume,
+       .driver         = {
+               .name           = DRVNAME,
+               .owner          = THIS_MODULE,
+       },
+};
+
+static int __init alix_led_init(void)
+{
+       int ret;
+
+       ret = platform_driver_register(&alix_led_driver);
+       if (ret < 0)
+               goto out;
+
+       pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0);
+       if (IS_ERR(pdev)) {
+               ret = PTR_ERR(pdev);
+               platform_driver_unregister(&alix_led_driver);
+               goto out;
+       }
+
+out:
+       return ret;
+}
+
+static void __exit alix_led_exit(void)
+{
+       platform_device_unregister(pdev);
+       platform_driver_unregister(&alix_led_driver);
+}
+
+module_init(alix_led_init);
+module_exit(alix_led_exit);
+
+MODULE_AUTHOR("Petr Liebman");
+MODULE_DESCRIPTION("PCEngines ALIX LED driver");
+MODULE_LICENSE("GPL");
+
diff --git a/target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-morse.c b/target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-morse.c
new file mode 100644 (file)
index 0000000..cb47480
--- /dev/null
@@ -0,0 +1,365 @@
+/*
+ *  LED Morse Trigger
+ *
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This file was based on: drivers/led/ledtrig-timer.c
+ *     Copyright 2005-2006 Openedhand Ltd.
+ *     Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ *  also based on the patch '[PATCH] 2.5.59 morse code panics' posted
+ *  in the LKML by Tomas Szepe at Thu, 30 Jan 2003
+ *     Copyright (C) 2002 Andrew Rodland <arodland@noln.com>
+ *     Copyright (C) 2003 Tomas Szepe <szepe@pinerecords.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/timer.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+
+#include "leds.h"
+
+#define MORSE_DELAY_BASE       (HZ/2)
+
+#define MORSE_STATE_BLINK_START        0
+#define MORSE_STATE_BLINK_STOP 1
+
+#define MORSE_DIT_LEN  1
+#define MORSE_DAH_LEN  3
+#define MORSE_SPACE_LEN        7
+
+struct morse_trig_data {
+       unsigned long delay;
+       char *msg;
+
+       unsigned char morse;
+       unsigned char state;
+       char *msgpos;
+       struct timer_list timer;
+};
+
+const unsigned char morsetable[] = {
+       0122, 0, 0310, 0, 0, 0163,                              /* "#$%&' */
+       055, 0155, 0, 0, 0163, 0141, 0152, 0051,                /* ()*+,-./ */
+       077, 076, 074, 070, 060, 040, 041, 043, 047, 057,       /* 0-9 */
+       0107, 0125, 0, 0061, 0, 0114, 0,                        /* :;<=>?@ */
+       006, 021, 025, 011, 002, 024, 013, 020, 004,            /* A-I */
+       036, 015, 022, 007, 005, 017, 026, 033, 012,            /* J-R */
+       010, 003, 014, 030, 016, 031, 035, 023,                 /* S-Z */
+       0, 0, 0, 0, 0154                                        /* [\]^_ */
+};
+
+static inline unsigned char tomorse(char c) {
+       if (c >= 'a' && c <= 'z')
+               c = c - 'a' + 'A';
+       if (c >= '"' && c <= '_') {
+               return morsetable[c - '"'];
+       } else
+               return 0;
+}
+
+static inline unsigned long dit_len(struct morse_trig_data *morse_data)
+{
+       return MORSE_DIT_LEN*morse_data->delay;
+}
+
+static inline unsigned long dah_len(struct morse_trig_data *morse_data)
+{
+       return MORSE_DAH_LEN*morse_data->delay;
+}
+
+static inline unsigned long space_len(struct morse_trig_data *morse_data)
+{
+       return MORSE_SPACE_LEN*morse_data->delay;
+}
+
+static void morse_timer_function(unsigned long data)
+{
+       struct led_classdev *led_cdev = (struct led_classdev *)data;
+       struct morse_trig_data *morse_data = led_cdev->trigger_data;
+       unsigned long brightness = LED_OFF;
+       unsigned long delay = 0;
+
+       if (!morse_data->msg)
+               goto set_led;
+
+       switch (morse_data->state) {
+       case MORSE_STATE_BLINK_START:
+               /* Starting a new blink.  We have a valid code in morse. */
+               delay = (morse_data->morse & 001) ? dah_len(morse_data):
+                       dit_len(morse_data);
+               brightness = LED_FULL;
+               morse_data->state = MORSE_STATE_BLINK_STOP;
+               morse_data->morse >>= 1;
+               break;
+       case MORSE_STATE_BLINK_STOP:
+               /* Coming off of a blink. */
+               morse_data->state = MORSE_STATE_BLINK_START;
+
+               if (morse_data->morse > 1) {
+                       /* Not done yet, just a one-dit pause. */
+                       delay = dit_len(morse_data);
+                       break;
+               }
+
+               /* Get a new char, figure out how much space. */
+               /* First time through */
+               if (!morse_data->msgpos)
+                       morse_data->msgpos = (char *)morse_data->msg;
+
+               if (!*morse_data->msgpos) {
+                       /* Repeating */
+                       morse_data->msgpos = (char *)morse_data->msg;
+                       delay = space_len(morse_data);
+               } else {
+                       /* Inter-letter space */
+                       delay = dah_len(morse_data);
+               }
+
+               if (!(morse_data->morse = tomorse(*morse_data->msgpos))) {
+                       delay = space_len(morse_data);
+                       /* And get us back here */
+                       morse_data->state = MORSE_STATE_BLINK_STOP;
+               }
+               morse_data->msgpos++;
+               break;
+       }
+
+       mod_timer(&morse_data->timer, jiffies + msecs_to_jiffies(delay));
+
+set_led:
+       led_set_brightness(led_cdev, brightness);
+}
+
+static ssize_t _morse_delay_show(struct led_classdev *led_cdev, char *buf)
+{
+       struct morse_trig_data *morse_data = led_cdev->trigger_data;
+
+       sprintf(buf, "%lu\n", morse_data->delay);
+
+       return strlen(buf) + 1;
+}
+
+static ssize_t _morse_delay_store(struct led_classdev *led_cdev,
+               const char *buf, size_t size)
+{
+       struct morse_trig_data *morse_data = led_cdev->trigger_data;
+       char *after;
+       unsigned long state = simple_strtoul(buf, &after, 10);
+       size_t count = after - buf;
+       int ret = -EINVAL;
+
+       if (*after && isspace(*after))
+               count++;
+
+       if (count == size) {
+               morse_data->delay = state;
+               mod_timer(&morse_data->timer, jiffies + 1);
+               ret = count;
+       }
+
+       return ret;
+}
+
+static ssize_t _morse_msg_show(struct led_classdev *led_cdev, char *buf)
+{
+       struct morse_trig_data *morse_data = led_cdev->trigger_data;
+
+       if (!morse_data->msg)
+               sprintf(buf, "<none>\n");
+       else
+               sprintf(buf, "%s\n", morse_data->msg);
+
+       return strlen(buf) + 1;
+}
+
+static ssize_t _morse_msg_store(struct led_classdev *led_cdev,
+               const char *buf, size_t size)
+{
+       struct morse_trig_data *morse_data = led_cdev->trigger_data;
+       char *m;
+
+       m = kmalloc(size, GFP_KERNEL);
+       if (!m)
+               return -ENOMEM;
+
+       memcpy(m,buf,size);
+       m[size]='\0';
+
+       if (morse_data->msg)
+               kfree(morse_data->msg);
+
+       morse_data->msg = m;
+       morse_data->msgpos = NULL;
+       morse_data->state = MORSE_STATE_BLINK_STOP;
+
+       mod_timer(&morse_data->timer, jiffies + 1);
+
+       return size;
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)
+static ssize_t morse_delay_show(struct device *dev,
+               struct device_attribute *attr, char *buf)
+{
+       struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+       return _morse_delay_show(led_cdev, buf);
+}
+
+static ssize_t morse_delay_store(struct device *dev,
+               struct device_attribute *attr, const char *buf, size_t size)
+{
+       struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+       return _morse_delay_store(led_cdev, buf, size);
+}
+
+static ssize_t morse_msg_show(struct device *dev,
+               struct device_attribute *attr, char *buf)
+{
+       struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+       return _morse_msg_show(led_cdev, buf);
+}
+
+static ssize_t morse_msg_store(struct device *dev,
+               struct device_attribute *attr, const char *buf, size_t size)
+{
+       struct led_classdev *led_cdev = dev_get_drvdata(dev);
+
+       return _morse_msg_store(led_cdev, buf, size);
+}
+
+static DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store);
+static DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store);
+
+#define led_device_create_file(leddev, attr) \
+       device_create_file(leddev->dev, &dev_attr_ ## attr)
+#define led_device_remove_file(leddev, attr) \
+       device_remove_file(leddev->dev, &dev_attr_ ## attr)
+
+#else
+static ssize_t morse_delay_show(struct class_device *dev, char *buf)
+{
+       struct led_classdev *led_cdev = class_get_devdata(dev);
+
+       return _morse_delay_show(led_cdev, buf);
+}
+
+static ssize_t morse_delay_store(struct class_device *dev, const char *buf,
+               size_t size)
+{
+       struct led_classdev *led_cdev = class_get_devdata(dev);
+
+       return _morse_delay_store(led_cdev, buf, size);
+}
+
+static ssize_t morse_msg_show(struct class_device *dev, char *buf)
+{
+       struct led_classdev *led_cdev = class_get_devdata(dev);
+
+       return _morse_msg_show(led_cdev, buf);
+}
+
+static ssize_t morse_msg_store(struct class_device *dev, const char *buf,
+                               size_t size)
+{
+       struct led_classdev *led_cdev = class_get_devdata(dev);
+
+       return _morse_msg_store(led_cdev, buf, size);
+}
+
+static CLASS_DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store);
+static CLASS_DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store);
+
+#define led_device_create_file(leddev, attr) \
+       class_device_create_file(leddev->class_dev, &class_device_attr_ ## attr)
+#define led_device_remove_file(leddev, attr) \
+       class_device_remove_file(leddev->class_dev, &class_device_attr_ ## attr)
+
+#endif
+
+static void morse_trig_activate(struct led_classdev *led_cdev)
+{
+       struct morse_trig_data *morse_data;
+       int rc;
+
+       morse_data = kzalloc(sizeof(*morse_data), GFP_KERNEL);
+       if (!morse_data)
+               return;
+
+       morse_data->delay = MORSE_DELAY_BASE;
+       init_timer(&morse_data->timer);
+       morse_data->timer.function = morse_timer_function;
+       morse_data->timer.data = (unsigned long)led_cdev;
+
+       rc = led_device_create_file(led_cdev, delay);
+       if (rc) goto err;
+
+       rc = led_device_create_file(led_cdev, message);
+       if (rc) goto err_delay;
+
+       led_cdev->trigger_data = morse_data;
+
+       return;
+
+err_delay:
+       led_device_remove_file(led_cdev, delay);
+err:
+       kfree(morse_data);
+}
+
+static void morse_trig_deactivate(struct led_classdev *led_cdev)
+{
+       struct morse_trig_data *morse_data = led_cdev->trigger_data;
+
+       if (!morse_data)
+               return;
+
+       led_device_remove_file(led_cdev, message);
+       led_device_remove_file(led_cdev, delay);
+
+       del_timer_sync(&morse_data->timer);
+       if (morse_data->msg)
+               kfree(morse_data->msg);
+
+       kfree(morse_data);
+}
+
+static struct led_trigger morse_led_trigger = {
+       .name           = "morse",
+       .activate       = morse_trig_activate,
+       .deactivate     = morse_trig_deactivate,
+};
+
+static int __init morse_trig_init(void)
+{
+       return led_trigger_register(&morse_led_trigger);
+}
+
+static void __exit morse_trig_exit(void)
+{
+       led_trigger_unregister(&morse_led_trigger);
+}
+
+module_init(morse_trig_init);
+module_exit(morse_trig_exit);
+
+MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_DESCRIPTION("Morse LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-netdev.c b/target/linux/generic-2.6/files-2.6.31/drivers/leds/ledtrig-netdev.c
new file mode 100644 (file)
index 0000000..4193e4e
--- /dev/null
@@ -0,0 +1,454 @@
+/*
+ * LED Kernel Netdev Trigger
+ *
+ * Toggles the LED to reflect the link and traffic state of a named net device
+ *
+ * Copyright 2007 Oliver Jowett <oliver@opencloud.com>
+ *
+ * Derived from ledtrig-timer.c which is:
+ *  Copyright 2005-2006 Openedhand Ltd.
+ *  Author: Richard Purdie <rpurdie@openedhand.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/sysdev.h>
+#include <linux/netdevice.h>
+#include <linux/timer.h>
+#include <linux/ctype.h>
+#include <linux/leds.h>
+#include <linux/version.h>
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)
+#include <net/net_namespace.h>
+#endif
+
+#include "leds.h"
+
+/*
+ * Configurable sysfs attributes:
+ *
+ * device_name - network device name to monitor
+ *
+ * interval - duration of LED blink, in milliseconds
+ *
+ * mode - either "none" (LED is off) or a space separated list of one or more of:
+ *   link: LED's normal state reflects whether the link is up (has carrier) or not
+ *   tx:   LED blinks on transmitted data
+ *   rx:   LED blinks on receive data
+ * 
+ * Some suggestions:
+ *
+ *  Simple link status LED:
+ *  $ echo netdev >someled/trigger
+ *  $ echo eth0 >someled/device_name
+ *  $ echo link >someled/mode
+ *
+ *  Ethernet-style link/activity LED:
+ *  $ echo netdev >someled/trigger
+ *  $ echo eth0 >someled/device_name
+ *  $ echo "link tx rx" >someled/mode
+ *
+ *  Modem-style tx/rx LEDs:
+ *  $ echo netdev >led1/trigger
+ *  $ echo ppp0 >led1/device_name
+ *  $ echo tx >led1/mode
+ *  $ echo netdev >led2/trigger
+ *  $ echo ppp0 >led2/device_name
+ *  $ echo rx >led2/mode
+ *
+ */
+
+#define MODE_LINK 1
+#define MODE_TX   2
+#define MODE_RX   4
+
+struct led_netdev_data {
+       rwlock_t lock;
+
+       struct timer_list timer;
+       struct notifier_block notifier;
+
+       struct led_classdev *led_cdev;
+       struct net_device *net_dev;
+
+       char device_name[IFNAMSIZ];
+       unsigned interval;
+       unsigned mode;
+       unsigned link_up;
+       unsigned last_activity;
+};
+
+static void set_baseline_state(struct led_netdev_data *trigger_data)
+{
+       if ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up)
+               led_set_brightness(trigger_data->led_cdev, LED_FULL);
+       else
+               led_set_brightness(trigger_data->led_cdev, LED_OFF);
+
+       if ((trigger_data->mode & (MODE_TX | MODE_RX)) != 0 && trigger_data->link_up)
+               mod_timer(&trigger_data->timer, jiffies + trigger_data->interval);
+       else
+               del_timer(&trigger_data->timer);
+}
+
+static ssize_t led_device_name_show(struct device *dev,
+                                   struct device_attribute *attr, char *buf)
+{
+       struct led_classdev *led_cdev = dev_get_drvdata(dev);
+       struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+       read_lock(&trigger_data->lock);
+       sprintf(buf, "%s\n", trigger_data->device_name);
+       read_unlock(&trigger_data->lock);
+
+       return strlen(buf) + 1;
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
+extern struct net init_net;
+#endif
+
+static ssize_t led_device_name_store(struct device *dev,
+                                    struct device_attribute *attr, const char *buf, size_t size)
+{
+       struct led_classdev *led_cdev = dev_get_drvdata(dev);
+       struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+       if (size < 0 || size >= IFNAMSIZ)
+               return -EINVAL;
+
+       write_lock(&trigger_data->lock);
+
+       strcpy(trigger_data->device_name, buf);
+       if (size > 0 && trigger_data->device_name[size-1] == '\n')
+               trigger_data->device_name[size-1] = 0;
+
+       if (trigger_data->device_name[0] != 0) {
+               /* check for existing device to update from */
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)
+               trigger_data->net_dev = dev_get_by_name(&init_net, trigger_data->device_name);
+#else
+               trigger_data->net_dev = dev_get_by_name(trigger_data->device_name);
+#endif
+               if (trigger_data->net_dev != NULL)
+                       trigger_data->link_up = (dev_get_flags(trigger_data->net_dev) & IFF_LOWER_UP) != 0;
+               set_baseline_state(trigger_data); /* updates LEDs, may start timers */
+       }
+
+       write_unlock(&trigger_data->lock);
+       return size;
+}
+
+static DEVICE_ATTR(device_name, 0644, led_device_name_show, led_device_name_store);
+
+static ssize_t led_mode_show(struct device *dev,
+                            struct device_attribute *attr, char *buf)
+{
+       struct led_classdev *led_cdev = dev_get_drvdata(dev);
+       struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+       read_lock(&trigger_data->lock);
+
+       if (trigger_data->mode == 0) {
+               strcpy(buf, "none\n");
+       } else {
+               if (trigger_data->mode & MODE_LINK)
+                       strcat(buf, "link ");
+               if (trigger_data->mode & MODE_TX)
+                       strcat(buf, "tx ");
+               if (trigger_data->mode & MODE_RX)
+                       strcat(buf, "rx ");
+               strcat(buf, "\n");
+       }
+
+       read_unlock(&trigger_data->lock);
+
+       return strlen(buf)+1;
+}
+
+static ssize_t led_mode_store(struct device *dev,
+                             struct device_attribute *attr, const char *buf, size_t size)
+{
+       struct led_classdev *led_cdev = dev_get_drvdata(dev);
+       struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+       char copybuf[1024];
+       int new_mode = -1;
+       char *p, *token;
+
+       /* take a copy since we don't want to trash the inbound buffer when using strsep */
+       strncpy(copybuf, buf, sizeof(copybuf));
+       copybuf[1023] = 0;
+       p = copybuf;
+
+       while ((token = strsep(&p, " \t\n")) != NULL) {
+               if (!*token)
+                       continue;
+
+               if (new_mode == -1)
+                       new_mode = 0;
+
+               if (!strcmp(token, "none"))
+                       new_mode = 0;
+               else if (!strcmp(token, "tx"))
+                       new_mode |= MODE_TX;
+               else if (!strcmp(token, "rx"))
+                       new_mode |= MODE_RX;
+               else if (!strcmp(token, "link"))
+                       new_mode |= MODE_LINK;
+               else
+                       return -EINVAL;
+       }
+
+       if (new_mode == -1)
+               return -EINVAL;
+
+       write_lock(&trigger_data->lock);
+       trigger_data->mode = new_mode;
+       set_baseline_state(trigger_data);
+       write_unlock(&trigger_data->lock);
+
+       return size;
+}
+
+static DEVICE_ATTR(mode, 0644, led_mode_show, led_mode_store);
+
+static ssize_t led_interval_show(struct device *dev,
+                                struct device_attribute *attr, char *buf)
+{
+       struct led_classdev *led_cdev = dev_get_drvdata(dev);
+       struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+       read_lock(&trigger_data->lock);
+       sprintf(buf, "%u\n", jiffies_to_msecs(trigger_data->interval));
+       read_unlock(&trigger_data->lock);
+
+       return strlen(buf) + 1;
+}
+
+static ssize_t led_interval_store(struct device *dev,
+                                 struct device_attribute *attr, const char *buf, size_t size)
+{
+       struct led_classdev *led_cdev = dev_get_drvdata(dev);
+       struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+       int ret = -EINVAL;
+       char *after;
+       unsigned long value = simple_strtoul(buf, &after, 10);
+       size_t count = after - buf;
+
+       if (*after && isspace(*after))
+               count++;
+
+       /* impose some basic bounds on the timer interval */
+       if (count == size && value >= 5 && value <= 10000) {
+               write_lock(&trigger_data->lock);
+               trigger_data->interval = msecs_to_jiffies(value);
+               set_baseline_state(trigger_data); // resets timer
+               write_unlock(&trigger_data->lock);
+               ret = count;
+       }
+
+       return ret;
+}
+
+static DEVICE_ATTR(interval, 0644, led_interval_show, led_interval_store);
+
+static int netdev_trig_notify(struct notifier_block *nb,
+                             unsigned long evt,
+                             void *dv)
+{
+       struct net_device *dev = dv;
+       struct led_netdev_data *trigger_data = container_of(nb, struct led_netdev_data, notifier);
+
+       if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER)
+               return NOTIFY_DONE;
+
+       write_lock(&trigger_data->lock);
+
+       if (strcmp(dev->name, trigger_data->device_name))
+               goto done;
+
+       if (evt == NETDEV_REGISTER) {
+               if (trigger_data->net_dev != NULL)
+                       dev_put(trigger_data->net_dev);
+               dev_hold(dev);
+               trigger_data->net_dev = dev;
+               trigger_data->link_up = 0;
+               goto done;
+       }
+
+       if (evt == NETDEV_UNREGISTER && trigger_data->net_dev != NULL) {
+               dev_put(trigger_data->net_dev);
+               trigger_data->net_dev = NULL;
+               goto done;
+       }
+
+       /* UP / DOWN / CHANGE */
+
+       trigger_data->link_up = (evt != NETDEV_DOWN && netif_carrier_ok(dev));
+       set_baseline_state(trigger_data);
+
+done:
+       write_unlock(&trigger_data->lock);
+       return NOTIFY_DONE;
+}
+
+/* here's the real work! */
+static void netdev_trig_timer(unsigned long arg)
+{
+       struct led_netdev_data *trigger_data = (struct led_netdev_data *)arg;
+       struct net_device_stats *dev_stats;
+       unsigned new_activity;
+
+       write_lock(&trigger_data->lock);
+
+       if (!trigger_data->link_up || !trigger_data->net_dev || (trigger_data->mode & (MODE_TX | MODE_RX)) == 0) {
+               /* we don't need to do timer work, just reflect link state. */
+               led_set_brightness(trigger_data->led_cdev, ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) ? LED_FULL : LED_OFF);
+               goto no_restart;
+       }
+#ifdef CONFIG_COMPAT_NET_DEV_OPS
+       dev_stats = trigger_data->net_dev->get_stats(trigger_data->net_dev);
+#else
+       dev_stats = trigger_data->net_dev->netdev_ops->ndo_get_stats(trigger_data->net_dev);
+#endif
+       new_activity =
+               ((trigger_data->mode & MODE_TX) ? dev_stats->tx_packets : 0) +
+               ((trigger_data->mode & MODE_RX) ? dev_stats->rx_packets : 0);
+
+       if (trigger_data->mode & MODE_LINK) {
+               /* base state is ON (link present) */
+               /* if there's no link, we don't get this far and the LED is off */
+
+               /* OFF -> ON always */
+               /* ON -> OFF on activity */
+               if (trigger_data->led_cdev->brightness == LED_OFF) {
+                       led_set_brightness(trigger_data->led_cdev, LED_FULL);
+               } else if (trigger_data->last_activity != new_activity) {
+                       led_set_brightness(trigger_data->led_cdev, LED_OFF);
+               }
+       } else {
+               /* base state is OFF */
+               /* ON -> OFF always */
+               /* OFF -> ON on activity */
+               if (trigger_data->led_cdev->brightness == LED_FULL) {
+                       led_set_brightness(trigger_data->led_cdev, LED_OFF);
+               } else if (trigger_data->last_activity != new_activity) {
+                       led_set_brightness(trigger_data->led_cdev, LED_FULL);
+               }
+       }
+
+       trigger_data->last_activity = new_activity;
+       mod_timer(&trigger_data->timer, jiffies + trigger_data->interval);
+
+no_restart:
+       write_unlock(&trigger_data->lock);
+}
+
+static void netdev_trig_activate(struct led_classdev *led_cdev)
+{
+       struct led_netdev_data *trigger_data;
+       int rc;
+
+       trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL);
+       if (!trigger_data)
+               return;
+
+       rwlock_init(&trigger_data->lock);
+
+       trigger_data->notifier.notifier_call = netdev_trig_notify;
+       trigger_data->notifier.priority = 10;
+
+       setup_timer(&trigger_data->timer, netdev_trig_timer, (unsigned long) trigger_data);
+
+       trigger_data->led_cdev = led_cdev;
+       trigger_data->net_dev = NULL;
+       trigger_data->device_name[0] = 0;
+
+       trigger_data->mode = 0;
+       trigger_data->interval = msecs_to_jiffies(50);
+       trigger_data->link_up = 0;
+       trigger_data->last_activity = 0;
+
+       led_cdev->trigger_data = trigger_data;
+
+       rc = device_create_file(led_cdev->dev, &dev_attr_device_name);
+       if (rc)
+               goto err_out;
+       rc = device_create_file(led_cdev->dev, &dev_attr_mode);
+       if (rc)
+               goto err_out_device_name;
+       rc = device_create_file(led_cdev->dev, &dev_attr_interval);
+       if (rc)
+               goto err_out_mode;
+
+       register_netdevice_notifier(&trigger_data->notifier);
+       return;
+
+err_out_mode:
+       device_remove_file(led_cdev->dev, &dev_attr_mode);
+err_out_device_name:
+       device_remove_file(led_cdev->dev, &dev_attr_device_name);
+err_out:
+       led_cdev->trigger_data = NULL;
+       kfree(trigger_data);
+}
+
+static void netdev_trig_deactivate(struct led_classdev *led_cdev)
+{
+       struct led_netdev_data *trigger_data = led_cdev->trigger_data;
+
+       if (trigger_data) {
+               unregister_netdevice_notifier(&trigger_data->notifier);
+
+               device_remove_file(led_cdev->dev, &dev_attr_device_name);
+               device_remove_file(led_cdev->dev, &dev_attr_mode);
+               device_remove_file(led_cdev->dev, &dev_attr_interval);
+
+               write_lock(&trigger_data->lock);
+
+               if (trigger_data->net_dev) {
+                       dev_put(trigger_data->net_dev);
+                       trigger_data->net_dev = NULL;
+               }
+
+               write_unlock(&trigger_data->lock);
+
+               del_timer_sync(&trigger_data->timer);
+
+               kfree(trigger_data);
+       }
+}
+
+static struct led_trigger netdev_led_trigger = {
+       .name     = "netdev",
+       .activate = netdev_trig_activate,
+       .deactivate = netdev_trig_deactivate,
+};
+
+static int __init netdev_trig_init(void)
+{
+       return led_trigger_register(&netdev_led_trigger);
+}
+
+static void __exit netdev_trig_exit(void)
+{
+       led_trigger_unregister(&netdev_led_trigger);
+}
+
+module_init(netdev_trig_init);
+module_exit(netdev_trig_exit);
+
+MODULE_AUTHOR("Oliver Jowett <oliver@opencloud.com>");
+MODULE_DESCRIPTION("Netdev LED trigger");
+MODULE_LICENSE("GPL");
diff --git a/target/linux/generic-2.6/files-2.6.31/drivers/net/phy/ar8216.c b/target/linux/generic-2.6/files-2.6.31/drivers/net/phy/ar8216.c
new file mode 100644 (file)
index 0000000..93e4b33
--- /dev/null
@@ -0,0 +1,651 @@
+/*
+ * ar8216.c: AR8216 switch driver
+ *
+ * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/if.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/if_ether.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/netlink.h>
+#include <linux/bitops.h>
+#include <net/genetlink.h>
+#include <linux/switch.h>
+#include <linux/delay.h>
+#include <linux/phy.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include "ar8216.h"
+
+
+struct ar8216_priv {
+       struct switch_dev dev;
+       struct phy_device *phy;
+       u32 (*read)(struct ar8216_priv *priv, int reg);
+       void (*write)(struct ar8216_priv *priv, int reg, u32 val);
+       const struct net_device_ops *ndo_old;
+       struct net_device_ops ndo;
+
+       /* all fields below are cleared on reset */
+       bool vlan;
+       u8 vlan_id[AR8216_NUM_VLANS];
+       u8 vlan_table[AR8216_NUM_VLANS];
+       u8 vlan_tagged;
+       u16 pvid[AR8216_NUM_PORTS];
+};
+static struct switch_dev athdev;
+
+#define to_ar8216(_dev) container_of(_dev, struct ar8216_priv, dev)
+
+static inline void
+split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
+{
+       regaddr >>= 1;
+       *r1 = regaddr & 0x1e;
+
+       regaddr >>= 5;
+       *r2 = regaddr & 0x7;
+
+       regaddr >>= 3;
+       *page = regaddr & 0x1ff;
+}
+
+static u32
+ar8216_mii_read(struct ar8216_priv *priv, int reg)
+{
+       struct phy_device *phy = priv->phy;
+       u16 r1, r2, page;
+       u16 lo, hi;
+
+       split_addr((u32) reg, &r1, &r2, &page);
+       phy->bus->write(phy->bus, 0x18, 0, page);
+       msleep(1); /* wait for the page switch to propagate */
+       lo = phy->bus->read(phy->bus, 0x10 | r2, r1);
+       hi = phy->bus->read(phy->bus, 0x10 | r2, r1 + 1);
+
+       return (hi << 16) | lo;
+}
+
+static void
+ar8216_mii_write(struct ar8216_priv *priv, int reg, u32 val)
+{
+       struct phy_device *phy = priv->phy;
+       u16 r1, r2, r3;
+       u16 lo, hi;
+
+       split_addr((u32) reg, &r1, &r2, &r3);
+       phy->bus->write(phy->bus, 0x18, 0, r3);
+       msleep(1); /* wait for the page switch to propagate */
+
+       lo = val & 0xffff;
+       hi = (u16) (val >> 16);
+       phy->bus->write(phy->bus, 0x10 | r2, r1 + 1, hi);
+       phy->bus->write(phy->bus, 0x10 | r2, r1, lo);
+}
+
+static u32
+ar8216_rmw(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
+{
+       u32 v;
+
+       v = priv->read(priv, reg);
+       v &= ~mask;
+       v |= val;
+       priv->write(priv, reg, v);
+
+       return v;
+}
+
+static int
+ar8216_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
+                struct switch_val *val)
+{
+       struct ar8216_priv *priv = to_ar8216(dev);
+       priv->vlan = !!val->value.i;
+       return 0;
+}
+
+static int
+ar8216_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
+                struct switch_val *val)
+{
+       struct ar8216_priv *priv = to_ar8216(dev);
+       val->value.i = priv->vlan;
+       return 0;
+}
+
+
+static int
+ar8216_set_pvid(struct switch_dev *dev, int port, int vlan)
+{
+       struct ar8216_priv *priv = to_ar8216(dev);
+       priv->pvid[port] = vlan;
+       return 0;
+}
+
+static int
+ar8216_get_pvid(struct switch_dev *dev, int port, int *vlan)
+{
+       struct ar8216_priv *priv = to_ar8216(dev);
+       *vlan = priv->pvid[port];
+       return 0;
+}
+
+static int
+ar8216_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
+                struct switch_val *val)
+{
+       struct ar8216_priv *priv = to_ar8216(dev);
+       priv->vlan_id[val->port_vlan] = val->value.i;
+       return 0;
+}
+
+static int
+ar8216_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
+                struct switch_val *val)
+{
+       struct ar8216_priv *priv = to_ar8216(dev);
+       val->value.i = priv->vlan_id[val->port_vlan];
+       return 0;
+}
+
+
+static int
+ar8216_mangle_tx(struct sk_buff *skb, struct net_device *dev)
+{
+       struct ar8216_priv *priv = dev->phy_ptr;
+       unsigned char *buf;
+
+    if (unlikely(!priv))
+        goto error;
+
+       if (!priv->vlan)
+               goto send;
+
+       if (unlikely(skb_headroom(skb) < 2)) {
+               if (pskb_expand_head(skb, 2, 0, GFP_ATOMIC) < 0)
+                       goto error;
+       }
+
+       buf = skb_push(skb, 2);
+       buf[0] = 0x10;
+       buf[1] = 0x80;
+
+send:
+       return priv->ndo_old->ndo_start_xmit(skb, dev);
+
+error:
+       dev_kfree_skb_any(skb);
+       return 0;
+}
+
+static int
+ar8216_mangle_rx(struct sk_buff *skb, int napi)
+{
+       struct ar8216_priv *priv;
+       struct net_device *dev;
+       unsigned char *buf;
+       int port, vlan;
+
+       dev = skb->dev;
+       if (!dev)
+               goto error;
+
+       priv = dev->phy_ptr;
+       if (!priv)
+               goto error;
+
+       /* don't strip the header if vlan mode is disabled */
+       if (!priv->vlan)
+               goto recv;
+
+       /* strip header, get vlan id */
+       buf = skb->data;
+       skb_pull(skb, 2);
+
+       /* check for vlan header presence */
+       if ((buf[12 + 2] != 0x81) || (buf[13 + 2] != 0x00))
+               goto recv;
+
+       port = buf[0] & 0xf;
+
+       /* no need to fix up packets coming from a tagged source */
+       if (priv->vlan_tagged & (1 << port))
+               goto recv;
+
+       /* lookup port vid from local table, the switch passes an invalid vlan id */
+       vlan = priv->pvid[port];
+
+       buf[14 + 2] &= 0xf0;
+       buf[14 + 2] |= vlan >> 8;
+       buf[15 + 2] = vlan & 0xff;
+
+recv:
+       skb->protocol = eth_type_trans(skb, skb->dev);
+
+       if (napi)
+               return netif_receive_skb(skb);
+       else
+               return netif_rx(skb);
+
+error:
+       /* no vlan? eat the packet! */
+       dev_kfree_skb_any(skb);
+       return 0;
+}
+
+static int
+ar8216_netif_rx(struct sk_buff *skb)
+{
+       return ar8216_mangle_rx(skb, 0);
+}
+
+static int
+ar8216_netif_receive_skb(struct sk_buff *skb)
+{
+       return ar8216_mangle_rx(skb, 1);
+}
+
+
+static struct switch_attr ar8216_globals[] = {
+       {
+               .type = SWITCH_TYPE_INT,
+               .name = "enable_vlan",
+               .description = "Enable VLAN mode",
+               .set = ar8216_set_vlan,
+               .get = ar8216_get_vlan,
+               .max = 1
+       },
+};
+
+static struct switch_attr ar8216_port[] = {
+};
+
+static struct switch_attr ar8216_vlan[] = {
+       {
+               .type = SWITCH_TYPE_INT,
+               .name = "pvid",
+               .description = "VLAN ID",
+               .set = ar8216_set_vid,
+               .get = ar8216_get_vid,
+               .max = 4095,
+       },
+};
+
+
+static int
+ar8216_get_ports(struct switch_dev *dev, struct switch_val *val)
+{
+       struct ar8216_priv *priv = to_ar8216(dev);
+       u8 ports = priv->vlan_table[val->port_vlan];
+       int i;
+
+       val->len = 0;
+       for (i = 0; i < AR8216_NUM_PORTS; i++) {
+               struct switch_port *p;
+
+               if (!(ports & (1 << i)))
+                       continue;
+
+               p = &val->value.ports[val->len++];
+               p->id = i;
+               if (priv->vlan_tagged & (1 << i))
+                       p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
+               else
+                       p->flags = 0;
+       }
+       return 0;
+}
+
+static int
+ar8216_set_ports(struct switch_dev *dev, struct switch_val *val)
+{
+       struct ar8216_priv *priv = to_ar8216(dev);
+       u8 *vt = &priv->vlan_table[val->port_vlan];
+       int i, j;
+
+       *vt = 0;
+       for (i = 0; i < val->len; i++) {
+               struct switch_port *p = &val->value.ports[i];
+
+               if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
+                       priv->vlan_tagged |= (1 << p->id);
+               else {
+                       priv->vlan_tagged &= ~(1 << p->id);
+                       priv->pvid[p->id] = val->port_vlan;
+
+                       /* make sure that an untagged port does not
+                        * appear in other vlans */
+                       for (j = 0; j < AR8216_NUM_VLANS; j++) {
+                               if (j == val->port_vlan)
+                                       continue;
+                               priv->vlan_table[j] &= ~(1 << p->id);
+                       }
+               }
+
+               *vt |= 1 << p->id;
+       }
+       return 0;
+}
+
+static int
+ar8216_wait_bit(struct ar8216_priv *priv, int reg, u32 mask, u32 val)
+{
+       int timeout = 20;
+
+       while ((priv->read(priv, reg) & mask) != val) {
+               if (timeout-- <= 0) {
+                       printk(KERN_ERR "ar8216: timeout waiting for operation to complete\n");
+                       return 1;
+               }
+       }
+       return 0;
+}
+
+static void
+ar8216_vtu_op(struct ar8216_priv *priv, u32 op, u32 val)
+{
+       if (ar8216_wait_bit(priv, AR8216_REG_VTU, AR8216_VTU_ACTIVE, 0))
+               return;
+       if ((op & AR8216_VTU_OP) == AR8216_VTU_OP_LOAD) {
+               val &= AR8216_VTUDATA_MEMBER;
+               val |= AR8216_VTUDATA_VALID;
+               priv->write(priv, AR8216_REG_VTU_DATA, val);
+       }
+       op |= AR8216_VTU_ACTIVE;
+       priv->write(priv, AR8216_REG_VTU, op);
+}
+
+static int
+ar8216_hw_apply(struct switch_dev *dev)
+{
+       struct ar8216_priv *priv = to_ar8216(dev);
+       u8 portmask[AR8216_NUM_PORTS];
+       int i, j;
+
+       /* flush all vlan translation unit entries */
+       ar8216_vtu_op(priv, AR8216_VTU_OP_FLUSH, 0);
+
+       memset(portmask, 0, sizeof(portmask));
+       if (priv->vlan) {
+               /* calculate the port destination masks and load vlans
+                * into the vlan translation unit */
+               for (j = 0; j < AR8216_NUM_VLANS; j++) {
+                       u8 vp = priv->vlan_table[j];
+
+                       if (!vp)
+                               continue;
+
+                       for (i = 0; i < AR8216_NUM_PORTS; i++) {
+                               u8 mask = (1 << i);
+                               if (vp & mask)
+                                       portmask[i] |= vp & ~mask;
+                       }
+
+                       if (!priv->vlan_table[j])
+                               continue;
+
+                       ar8216_vtu_op(priv,
+                               AR8216_VTU_OP_LOAD |
+                               (priv->vlan_id[j] << AR8216_VTU_VID_S),
+                               priv->vlan_table[j]);
+               }
+       } else {
+               /* vlan disabled:
+                * isolate all ports, but connect them to the cpu port */
+               for (i = 0; i < AR8216_NUM_PORTS; i++) {
+                       if (i == AR8216_PORT_CPU)
+                               continue;
+
+                       portmask[i] = 1 << AR8216_PORT_CPU;
+                       portmask[AR8216_PORT_CPU] |= (1 << i);
+               }
+       }
+
+       /* update the port destination mask registers and tag settings */
+       for (i = 0; i < AR8216_NUM_PORTS; i++) {
+               int egress, ingress;
+               int pvid;
+
+               if (priv->vlan) {
+                       pvid = priv->vlan_id[priv->pvid[i]];
+               } else {
+                       pvid = i;
+               }
+
+               if (priv->vlan && (priv->vlan_tagged & (1 << i))) {
+                       egress = AR8216_OUT_ADD_VLAN;
+               } else {
+                       egress = AR8216_OUT_STRIP_VLAN;
+               }
+               ingress = AR8216_IN_SECURE;
+
+               ar8216_rmw(priv, AR8216_REG_PORT_CTRL(i),
+                       AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE |
+                       AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE |
+                       AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK,
+                       AR8216_PORT_CTRL_LEARN |
+                         (priv->vlan && i == AR8216_PORT_CPU ?
+                          AR8216_PORT_CTRL_HEADER : 0) |
+                         (egress << AR8216_PORT_CTRL_VLAN_MODE_S) |
+                         (AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S));
+
+               ar8216_rmw(priv, AR8216_REG_PORT_VLAN(i),
+                       AR8216_PORT_VLAN_DEST_PORTS | AR8216_PORT_VLAN_MODE |
+                         AR8216_PORT_VLAN_DEFAULT_ID,
+                       (portmask[i] << AR8216_PORT_VLAN_DEST_PORTS_S) |
+                         (ingress << AR8216_PORT_VLAN_MODE_S) |
+                         (pvid << AR8216_PORT_VLAN_DEFAULT_ID_S));
+       }
+
+       return 0;
+}
+
+static int
+ar8216_reset_switch(struct switch_dev *dev)
+{
+       struct ar8216_priv *priv = to_ar8216(dev);
+       int i;
+
+       memset(&priv->vlan, 0, sizeof(struct ar8216_priv) -
+               offsetof(struct ar8216_priv, vlan));
+       for (i = 0; i < AR8216_NUM_VLANS; i++) {
+               priv->vlan_id[i] = i;
+       }
+       for (i = 0; i < AR8216_NUM_PORTS; i++) {
+               /* Enable port learning and tx */
+               priv->write(priv, AR8216_REG_PORT_CTRL(i),
+                       AR8216_PORT_CTRL_LEARN |
+                       (4 << AR8216_PORT_CTRL_STATE_S));
+
+               priv->write(priv, AR8216_REG_PORT_VLAN(i), 0);
+
+               /* Configure all PHYs */
+               if (i == AR8216_PORT_CPU) {
+                       priv->write(priv, AR8216_REG_PORT_STATUS(i),
+                               AR8216_PORT_STATUS_LINK_UP |
+                               AR8216_PORT_STATUS_SPEED |
+                               AR8216_PORT_STATUS_TXMAC |
+                               AR8216_PORT_STATUS_RXMAC |
+                               AR8216_PORT_STATUS_DUPLEX);
+               } else {
+                       priv->write(priv, AR8216_REG_PORT_STATUS(i),
+                               AR8216_PORT_STATUS_LINK_AUTO);
+               }
+       }
+       /* XXX: undocumented magic from atheros, required! */
+       priv->write(priv, 0x38, 0xc000050e);
+
+       ar8216_rmw(priv, AR8216_REG_GLOBAL_CTRL,
+               AR8216_GCTRL_MTU, 1518 + 8 + 2);
+
+       return ar8216_hw_apply(dev);
+}
+
+static int
+ar8216_config_init(struct phy_device *pdev)
+{
+       struct ar8216_priv *priv;
+       struct net_device *dev = pdev->attached_dev;
+       int ret;
+
+       printk("%s: AR8216 PHY driver attached.\n", pdev->attached_dev->name);
+       pdev->supported = ADVERTISED_100baseT_Full;
+       pdev->advertising = ADVERTISED_100baseT_Full;
+
+       priv = kzalloc(sizeof(struct ar8216_priv), GFP_KERNEL);
+       if (priv == NULL)
+               return -ENOMEM;
+
+       priv->phy = pdev;
+       priv->read = ar8216_mii_read;
+       priv->write = ar8216_mii_write;
+       memcpy(&priv->dev, &athdev, sizeof(struct switch_dev));
+       pdev->priv = priv;
+       if ((ret = register_switch(&priv->dev, pdev->attached_dev)) < 0) {
+               kfree(priv);
+               goto done;
+       }
+
+       ret = ar8216_reset_switch(&priv->dev);
+       if (ret)
+               goto done;
+
+       dev->phy_ptr = priv;
+       pdev->pkt_align = 2;
+       pdev->netif_receive_skb = ar8216_netif_receive_skb;
+       pdev->netif_rx = ar8216_netif_rx;
+
+       priv->ndo_old = dev->netdev_ops;
+       memcpy(&priv->ndo, priv->ndo_old, sizeof(struct net_device_ops));
+       priv->ndo.ndo_start_xmit = ar8216_mangle_tx;
+       dev->netdev_ops = &priv->ndo;
+
+done:
+       return ret;
+}
+
+static int
+ar8216_read_status(struct phy_device *phydev)
+{
+       struct ar8216_priv *priv = phydev->priv;
+
+       phydev->speed = SPEED_100;
+       phydev->duplex = DUPLEX_FULL;
+       phydev->state = PHY_UP;
+
+       /* flush the address translation unit */
+       if (ar8216_wait_bit(priv, AR8216_REG_ATU, AR8216_ATU_ACTIVE, 0))
+               return -ETIMEDOUT;
+
+       priv->write(priv, AR8216_REG_ATU, AR8216_ATU_OP_FLUSH);
+
+       return 0;
+}
+
+static int
+ar8216_config_aneg(struct phy_device *phydev)
+{
+       return 0;
+}
+
+static int
+ar8216_probe(struct phy_device *pdev)
+{
+       struct ar8216_priv priv;
+
+       u8 id, rev;
+       u32 val;
+
+       priv.phy = pdev;
+       val = ar8216_mii_read(&priv, AR8216_REG_CTRL);
+       rev = val & 0xff;
+       id = (val >> 8) & 0xff;
+       if ((id != 1) || (rev != 1))
+               return -ENODEV;
+
+       return 0;
+}
+
+static void
+ar8216_remove(struct phy_device *pdev)
+{
+       struct ar8216_priv *priv = pdev->priv;
+       struct net_device *dev = pdev->attached_dev;
+
+       if (!priv)
+               return;
+
+       if (priv->ndo_old && dev)
+               dev->netdev_ops = priv->ndo_old;
+       unregister_switch(&priv->dev);
+       kfree(priv);
+}
+
+/* template */
+static struct switch_dev athdev = {
+       .name = "Atheros AR8216",
+       .cpu_port = AR8216_PORT_CPU,
+       .ports = AR8216_NUM_PORTS,
+       .vlans = AR8216_NUM_VLANS,
+       .attr_global = {
+               .attr = ar8216_globals,
+               .n_attr = ARRAY_SIZE(ar8216_globals),
+       },
+       .attr_port = {
+               .attr = ar8216_port,
+               .n_attr = ARRAY_SIZE(ar8216_port),
+       },
+       .attr_vlan = {
+               .attr = ar8216_vlan,
+               .n_attr = ARRAY_SIZE(ar8216_vlan),
+       },
+       .get_port_pvid = ar8216_get_pvid,
+       .set_port_pvid = ar8216_set_pvid,
+       .get_vlan_ports = ar8216_get_ports,
+       .set_vlan_ports = ar8216_set_ports,
+       .apply_config = ar8216_hw_apply,
+       .reset_switch = ar8216_reset_switch,
+};
+
+static struct phy_driver ar8216_driver = {
+       .name           = "Atheros AR8216",
+       .features       = PHY_BASIC_FEATURES,
+       .probe          = ar8216_probe,
+       .remove         = ar8216_remove,
+       .config_init    = &ar8216_config_init,
+       .config_aneg    = &ar8216_config_aneg,
+       .read_status    = &ar8216_read_status,
+       .driver         = { .owner = THIS_MODULE },
+};
+
+int __init
+ar8216_init(void)
+{
+       return phy_driver_register(&ar8216_driver);
+}
+
+void __exit
+ar8216_exit(void)
+{
+       phy_driver_unregister(&ar8216_driver);
+}
+
+module_init(ar8216_init);
+module_exit(ar8216_exit);
+MODULE_LICENSE("GPL");
+
diff --git a/target/linux/generic-2.6/files-2.6.31/drivers/net/phy/mvswitch.c b/target/linux/generic-2.6/files-2.6.31/drivers/net/phy/mvswitch.c
new file mode 100644 (file)
index 0000000..7aed70d
--- /dev/null
@@ -0,0 +1,467 @@
+/*
+ * Marvell 88E6060 switch driver
+ * Copyright (c) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation
+ */
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/if_vlan.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include "mvswitch.h"
+
+/* Undefine this to use trailer mode instead.
+ * I don't know if header mode works with all chips */
+#define HEADER_MODE    1
+
+MODULE_DESCRIPTION("Marvell 88E6060 Switch driver");
+MODULE_AUTHOR("Felix Fietkau");
+MODULE_LICENSE("GPL");
+
+#define MVSWITCH_MAGIC 0x88E6060
+
+struct mvswitch_priv {
+       const struct net_device_ops *ndo_old;
+       struct net_device_ops ndo;
+       struct vlan_group *grp;
+       u8 vlans[16];
+};
+
+#define to_mvsw(_phy) ((struct mvswitch_priv *) (_phy)->priv)
+
+static inline u16
+r16(struct phy_device *phydev, int addr, int reg)
+{
+       return phydev->bus->read(phydev->bus, addr, reg);
+}
+
+static inline void
+w16(struct phy_device *phydev, int addr, int reg, u16 val)
+{
+       phydev->bus->write(phydev->bus, addr, reg, val);
+}
+
+
+static int
+mvswitch_mangle_tx(struct sk_buff *skb, struct net_device *dev)
+{
+       struct mvswitch_priv *priv;
+       char *buf = NULL;
+       u16 vid;
+
+       priv = dev->phy_ptr;
+       if (unlikely(!priv))
+               goto error;
+
+       if (unlikely(skb->len < 16))
+               goto error;
+
+#ifdef HEADER_MODE
+       if (__vlan_hwaccel_get_tag(skb, &vid))
+               goto error;
+
+       if (skb_cloned(skb) || (skb->len <= 62) || (skb_headroom(skb) < MV_HEADER_SIZE)) {
+               if (pskb_expand_head(skb, MV_HEADER_SIZE, (skb->len < 62 ? 62 - skb->len : 0), GFP_ATOMIC))
+                       goto error_expand;
+               if (skb->len < 62)
+                       skb->len = 62;
+       }
+       buf = skb_push(skb, MV_HEADER_SIZE);
+#else
+       if (__vlan_get_tag(skb, &vid))
+               goto error;
+
+       if (unlikely((vid > 15 || !priv->vlans[vid])))
+               goto error;
+
+       if (skb->len <= 64) {
+               if (pskb_expand_head(skb, 0, 64 + MV_TRAILER_SIZE - skb->len, GFP_ATOMIC))
+                       goto error_expand;
+
+               buf = skb->data + 64;
+               skb->len = 64 + MV_TRAILER_SIZE;
+       } else {
+               if (skb_cloned(skb) || unlikely(skb_tailroom(skb) < 4)) {
+                       if (pskb_expand_head(skb, 0, 4, GFP_ATOMIC))
+                               goto error_expand;
+               }
+               buf = skb_put(skb, 4);
+       }
+
+       /* move the ethernet header 4 bytes forward, overwriting the vlan tag */
+       memmove(skb->data + 4, skb->data, 12);
+       skb->data += 4;
+       skb->len -= 4;
+       skb->mac_header += 4;
+#endif
+
+       if (!buf)
+               goto error;
+
+
+#ifdef HEADER_MODE
+       /* prepend the tag */
+       *((__be16 *) buf) = cpu_to_be16(
+               ((vid << MV_HEADER_VLAN_S) & MV_HEADER_VLAN_M) |
+               ((priv->vlans[vid] << MV_HEADER_PORTS_S) & MV_HEADER_PORTS_M)
+       );
+#else
+       /* append the tag */
+       *((__be32 *) buf) = cpu_to_be32((
+               (MV_TRAILER_OVERRIDE << MV_TRAILER_FLAGS_S) |
+               ((priv->vlans[vid] & MV_TRAILER_PORTS_M) << MV_TRAILER_PORTS_S)
+       ));
+#endif
+
+       return priv->ndo_old->ndo_start_xmit(skb, dev);
+
+error_expand:
+       if (net_ratelimit())
+               printk("%s: failed to expand/update skb for the switch\n", dev->name);
+
+error:
+       /* any errors? drop the packet! */
+       dev_kfree_skb_any(skb);
+       return 0;
+}
+
+static int
+mvswitch_mangle_rx(struct sk_buff *skb, int napi)
+{
+       struct mvswitch_priv *priv;
+       struct net_device *dev;
+       int vlan = -1;
+       unsigned char *buf;
+       int i;
+
+       dev = skb->dev;
+       if (!dev)
+               goto error;
+
+       priv = dev->phy_ptr;
+       if (!priv)
+               goto error;
+
+       if (!priv->grp)
+               goto error;
+
+#ifdef HEADER_MODE
+       buf = skb->data;
+       skb_pull(skb, MV_HEADER_SIZE);
+#else
+       buf = skb->data + skb->len - MV_TRAILER_SIZE;
+       if (buf[0] != 0x80)
+               goto error;
+#endif
+
+       /* look for the vlan matching the incoming port */
+       for (i = 0; i < ARRAY_SIZE(priv->vlans); i++) {
+               if ((1 << buf[1]) & priv->vlans[i])
+                       vlan = i;
+       }
+
+       if (vlan == -1)
+               goto error;
+
+       skb->protocol = eth_type_trans(skb, skb->dev);
+
+       if (napi)
+               return vlan_hwaccel_receive_skb(skb, priv->grp, vlan);
+       else
+               return vlan_hwaccel_rx(skb, priv->grp, vlan);
+
+error:
+       /* no vlan? eat the packet! */
+       dev_kfree_skb_any(skb);
+       return 0;
+}
+
+
+static int
+mvswitch_netif_rx(struct sk_buff *skb)
+{
+       return mvswitch_mangle_rx(skb, 0);
+}
+
+static int
+mvswitch_netif_receive_skb(struct sk_buff *skb)
+{
+       return mvswitch_mangle_rx(skb, 1);
+}
+
+
+static void
+mvswitch_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+{
+       struct mvswitch_priv *priv = dev->phy_ptr;
+       priv->grp = grp;
+}
+
+
+static int
+mvswitch_wait_mask(struct phy_device *pdev, int addr, int reg, u16 mask, u16 val)
+{
+       int i = 100;
+       u16 r;
+
+       do {
+               r = r16(pdev, addr, reg) & mask;
+               if (r == val)
+                       return 0;
+       } while(--i > 0);
+       return -ETIMEDOUT;
+}
+
+static int
+mvswitch_config_init(struct phy_device *pdev)
+{
+       struct mvswitch_priv *priv = to_mvsw(pdev);
+       struct net_device *dev = pdev->attached_dev;
+       u8 vlmap = 0;
+       int i;
+
+       if (!dev)
+               return -EINVAL;
+
+       printk("%s: Marvell 88E6060 PHY driver attached.\n", dev->name);
+       pdev->supported = ADVERTISED_100baseT_Full;
+       pdev->advertising = ADVERTISED_100baseT_Full;
+       dev->phy_ptr = priv;
+       dev->irq = PHY_POLL;
+
+       /* initialize default vlans */
+       for (i = 0; i < MV_PORTS; i++)
+               priv->vlans[(i == MV_WANPORT ? 2 : 1)] |= (1 << i);
+
+       /* before entering reset, disable all ports */
+       for (i = 0; i < MV_PORTS; i++)
+               w16(pdev, MV_PORTREG(CONTROL, i), 0x00);
+
+       msleep(2); /* wait for the status change to settle in */
+
+       /* put the ATU in reset */
+       w16(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET);
+
+       i = mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_CTRL), MV_ATUCTL_RESET, 0);
+       if (i < 0) {
+               printk("%s: Timeout waiting for the switch to reset.\n", dev->name);
+               return i;
+       }
+
+       /* set the ATU flags */
+       w16(pdev, MV_SWITCHREG(ATU_CTRL),
+               MV_ATUCTL_NO_LEARN |
+               MV_ATUCTL_ATU_1K |
+               MV_ATUCTL_AGETIME(MV_ATUCTL_AGETIME_MIN) /* minimum without disabling ageing */
+       );
+
+       /* initialize the cpu port */
+       w16(pdev, MV_PORTREG(CONTROL, MV_CPUPORT),
+#ifdef HEADER_MODE
+               MV_PORTCTRL_HEADER |
+#else
+               MV_PORTCTRL_RXTR |
+               MV_PORTCTRL_TXTR |
+#endif
+               MV_PORTCTRL_ENABLED
+       );
+       /* wait for the phy change to settle in */
+       msleep(2);
+       for (i = 0; i < MV_PORTS; i++) {
+               u8 pvid = 0;
+               int j;
+
+               vlmap = 0;
+
+               /* look for the matching vlan */
+               for (j = 0; j < ARRAY_SIZE(priv->vlans); j++) {
+                       if (priv->vlans[j] & (1 << i)) {
+                               vlmap = priv->vlans[j];
+                               pvid = j;
+                       }
+               }
+               /* leave port unconfigured if it's not part of a vlan */
+               if (!vlmap)
+                       continue;
+
+               /* add the cpu port to the allowed destinations list */
+               vlmap |= (1 << MV_CPUPORT);
+
+               /* take port out of its own vlan destination map */
+               vlmap &= ~(1 << i);
+
+               /* apply vlan settings */
+               w16(pdev, MV_PORTREG(VLANMAP, i),
+                       MV_PORTVLAN_PORTS(vlmap) |
+                       MV_PORTVLAN_ID(i)
+               );
+
+               /* re-enable port */
+               w16(pdev, MV_PORTREG(CONTROL, i),
+                       MV_PORTCTRL_ENABLED
+               );
+       }
+
+       w16(pdev, MV_PORTREG(VLANMAP, MV_CPUPORT),
+               MV_PORTVLAN_ID(MV_CPUPORT)
+       );
+
+       /* set the port association vector */
+       for (i = 0; i <= MV_PORTS; i++) {
+               w16(pdev, MV_PORTREG(ASSOC, i),
+                       MV_PORTASSOC_PORTS(1 << i)
+               );
+       }
+
+       /* init switch control */
+       w16(pdev, MV_SWITCHREG(CTRL),
+               MV_SWITCHCTL_MSIZE |
+               MV_SWITCHCTL_DROP
+       );
+
+       /* hook into the tx function */
+       priv->ndo_old = dev->netdev_ops;
+       memcpy(&priv->ndo, priv->ndo_old, sizeof(struct net_device_ops));
+       priv->ndo.ndo_start_xmit = mvswitch_mangle_tx;
+       priv->ndo.ndo_vlan_rx_register = mvswitch_vlan_rx_register;
+       dev->netdev_ops = &priv->ndo;
+
+       pdev->pkt_align = 2;
+       pdev->netif_receive_skb = mvswitch_netif_receive_skb;
+       pdev->netif_rx = mvswitch_netif_rx;
+#ifdef HEADER_MODE
+       dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX;
+#else
+       dev->features |= NETIF_F_HW_VLAN_RX;
+#endif
+
+       return 0;
+}
+
+static int
+mvswitch_read_status(struct phy_device *pdev)
+{
+       pdev->speed = SPEED_100;
+       pdev->duplex = DUPLEX_FULL;
+       pdev->state = PHY_UP;
+
+       /* XXX ugly workaround: we can't force the switch
+        * to gracefully handle hosts moving from one port to another,
+        * so we have to regularly clear the ATU database */
+
+       /* wait for the ATU to become available */
+       mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0);
+
+       /* flush the ATU */
+       w16(pdev, MV_SWITCHREG(ATU_OP),
+               MV_ATUOP_INPROGRESS |
+               MV_ATUOP_FLUSH_ALL
+       );
+
+       /* wait for operation to complete */
+       mvswitch_wait_mask(pdev, MV_SWITCHREG(ATU_OP), MV_ATUOP_INPROGRESS, 0);
+
+       return 0;
+}
+
+static int
+mvswitch_config_aneg(struct phy_device *phydev)
+{
+       return 0;
+}
+
+static void
+mvswitch_remove(struct phy_device *pdev)
+{
+       struct mvswitch_priv *priv = to_mvsw(pdev);
+       struct net_device *dev = pdev->attached_dev;
+
+       /* restore old netdev ops */
+       if (priv->ndo_old && dev)
+               dev->netdev_ops = priv->ndo_old;
+       dev->vlan_rx_register = NULL;
+       dev->vlan_rx_kill_vid = NULL;
+       dev->phy_ptr = NULL;
+       dev->features &= ~NETIF_F_HW_VLAN_RX;
+       kfree(priv);
+}
+
+static int
+mvswitch_probe(struct phy_device *pdev)
+{
+       struct mvswitch_priv *priv;
+
+       priv = kzalloc(sizeof(struct mvswitch_priv), GFP_KERNEL);
+       if (priv == NULL)
+               return -ENOMEM;
+
+       pdev->priv = priv;
+
+       return 0;
+}
+
+static int
+mvswitch_fixup(struct phy_device *dev)
+{
+       u16 reg;
+
+       if (dev->addr != 0x10)
+               return 0;
+
+       reg = dev->bus->read(dev->bus, MV_PORTREG(IDENT, 0)) & MV_IDENT_MASK;
+       if (reg != MV_IDENT_VALUE)
+               return 0;
+
+       dev->phy_id = MVSWITCH_MAGIC;
+       return 0;
+}
+
+
+static struct phy_driver mvswitch_driver = {
+       .name           = "Marvell 88E6060",
+       .phy_id         = MVSWITCH_MAGIC,
+       .phy_id_mask    = 0xffffffff,
+       .features       = PHY_BASIC_FEATURES,
+       .probe          = &mvswitch_probe,
+       .remove         = &mvswitch_remove,
+       .config_init    = &mvswitch_config_init,
+       .config_aneg    = &mvswitch_config_aneg,
+       .read_status    = &mvswitch_read_status,
+       .driver         = { .owner = THIS_MODULE,},
+};
+
+static int __init
+mvswitch_init(void)
+{
+       phy_register_fixup_for_id(PHY_ANY_ID, mvswitch_fixup);
+       return phy_driver_register(&mvswitch_driver);
+}
+
+static void __exit
+mvswitch_exit(void)
+{
+       phy_driver_unregister(&mvswitch_driver);
+}
+
+module_init(mvswitch_init);
+module_exit(mvswitch_exit);
diff --git a/target/linux/generic-2.6/files-2.6.31/include/linux/glamo-engine.h b/target/linux/generic-2.6/files-2.6.31/include/linux/glamo-engine.h
new file mode 100644 (file)
index 0000000..516d45f
--- /dev/null
@@ -0,0 +1,27 @@
+#ifndef __GLAMO_ENGINE_H
+#define __GLAMO_ENGINE_H
+
+enum glamo_engine {
+       GLAMO_ENGINE_CAPTURE = 0,
+       GLAMO_ENGINE_ISP = 1,
+       GLAMO_ENGINE_JPEG = 2,
+       GLAMO_ENGINE_MPEG_ENC = 3,
+       GLAMO_ENGINE_MPEG_DEC = 4,
+       GLAMO_ENGINE_LCD = 5,
+       GLAMO_ENGINE_CMDQ = 6,
+       GLAMO_ENGINE_2D = 7,
+       GLAMO_ENGINE_3D = 8,
+       GLAMO_ENGINE_MMC = 9,
+       GLAMO_ENGINE_MICROP0 = 10,
+       GLAMO_ENGINE_RISC = 11,
+       GLAMO_ENGINE_MICROP1_MPEG_ENC = 12,
+       GLAMO_ENGINE_MICROP1_MPEG_DEC = 13,
+#if 0
+       GLAMO_ENGINE_H264_DEC = 14,
+       GLAMO_ENGINE_RISC1 = 15,
+       GLAMO_ENGINE_SPI = 16,
+#endif
+       __NUM_GLAMO_ENGINES
+};
+
+#endif
diff --git a/target/linux/generic-2.6/files-2.6.31/include/linux/glamofb.h b/target/linux/generic-2.6/files-2.6.31/include/linux/glamofb.h
new file mode 100644 (file)
index 0000000..5f9fab5
--- /dev/null
@@ -0,0 +1,35 @@
+#ifndef _LINUX_GLAMOFB_H
+#define _LINUX_GLAMOFB_H
+
+#include <linux/fb.h>
+
+#ifdef __KERNEL__
+
+struct glamo_core;
+struct glamofb_handle;
+
+struct glamo_fb_platform_data {
+    int width, height;
+
+    int num_modes;
+    struct fb_videomode *modes;
+
+    struct glamo_core *core;
+};
+
+int glamofb_cmd_mode(struct glamofb_handle *gfb, int on);
+int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val);
+
+#ifdef CONFIG_MFD_GLAMO
+void glamo_lcm_reset(struct platform_device *pdev, int level);
+#else
+#define glamo_lcm_reset(...) do {} while (0)
+#endif
+
+#endif
+
+#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32)
+#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32)
+#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32)
+
+#endif
diff --git a/target/linux/generic-2.6/files-2.6.31/include/linux/gpio_buttons.h b/target/linux/generic-2.6/files-2.6.31/include/linux/gpio_buttons.h
new file mode 100644 (file)
index 0000000..f5e6297
--- /dev/null
@@ -0,0 +1,35 @@
+/*
+ *  Definitions for the GPIO buttons interface driver
+ *
+ *  Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  This file was based on: /include/linux/gpio_keys.h
+ *     The original gpio_keys.h seems not to have a license.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _GPIO_BUTTONS_H_
+#define _GPIO_BUTTONS_H_
+
+struct gpio_button {
+       int     gpio;           /* GPIO line number */
+       int     active_low;
+       char    *desc;          /* button description */
+       int     type;           /* input event type (EV_KEY, EV_SW) */
+       int     code;           /* input event code (KEY_*, SW_*) */
+       int     count;
+       int     threshold;      /* count threshold */
+};
+
+struct gpio_buttons_platform_data {
+       struct gpio_button *buttons;
+       int     nbuttons;               /* number of buttons */
+       int     poll_interval;          /* polling interval */
+};
+
+#endif /* _GPIO_BUTTONS_H_ */
+
diff --git a/target/linux/generic-2.6/files-2.6.31/include/linux/gpio_dev.h b/target/linux/generic-2.6/files-2.6.31/include/linux/gpio_dev.h
new file mode 100644 (file)
index 0000000..3f3c9c7
--- /dev/null
@@ -0,0 +1,11 @@
+#ifndef _GPIODEV_H__
+#define _GPIODEV_H__
+
+#define IOC_GPIODEV_MAGIC  'B'
+#define GPIO_GET        _IO(IOC_GPIODEV_MAGIC, 10)
+#define GPIO_SET        _IO(IOC_GPIODEV_MAGIC, 11)
+#define GPIO_CLEAR      _IO(IOC_GPIODEV_MAGIC, 12)
+#define GPIO_DIR_IN     _IO(IOC_GPIODEV_MAGIC, 13)
+#define GPIO_DIR_OUT    _IO(IOC_GPIODEV_MAGIC, 14)
+
+#endif