ath79: add support for I-O DATA WN-AC1167DGR
authorINAGAKI Hiroshi <musashino.open@gmail.com>
Thu, 16 Aug 2018 08:08:28 +0000 (17:08 +0900)
committerMathias Kresin <dev@kresin.me>
Thu, 16 Aug 2018 19:20:57 +0000 (21:20 +0200)
I-O DATA WN-AC1167DGR is a 2.4/5 GHz band 11ac router, based on
Qualcomm Atheros QCA9557.

Specification:

- Qualcomm Atheros QCA9557
- 128 MB of RAM (DDR2)
- 16 MB of Flash (SPI)
- 2T2R 2.4/5 GHz wifi
  - 2.4 GHz: SoC internal
  - 5 GHz: QCA988x
- 5x 10/100/1000 Mbps Ethernet
- 6x LEDs, 6x keys (4x buttons, 1x slide switch)
- UART header on PCB
  - Vcc, GND, TX, RX from ethernet port side
  - 115200n8

Flash instruction using factory image:

1. Connect the computer to the LAN port of WN-AC1167DGR
2. Connect power cable to WN-AC1167DGR and turn on it
3. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
4. Select the OpenWrt factory image and click update ("更新") button
5. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
target/linux/ath79/base-files/etc/board.d/02_network
target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi [new file with mode: 0644]
target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts [new file with mode: 0644]
target/linux/ath79/dts/qca9557_iodata_wn-ac1600dgr2.dts
target/linux/ath79/image/generic.mk

index 653f813..6032519 100755 (executable)
@@ -48,6 +48,7 @@ ath79_setup_interfaces()
        glinet,ar300m)
                ucidef_set_interfaces_lan_wan "eth1" "eth0"
                ;;
+       iodata,wn-ac1167dgr|\
        iodata,wn-ac1600dgr2|\
        pcs,cr5000)
                ucidef_add_switch "switch0" \
@@ -158,6 +159,7 @@ ath79_setup_macs()
                lan_mac=$(mtd_get_mac_text "caldata" 65440)
                wan_mac=$(mtd_get_mac_text "caldata" 65460)
                ;;
+       iodata,wn-ac1167dgr|\
        iodata,wn-ac1600dgr2)
                lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
                wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
index 1be0d2a..f668a82 100644 (file)
@@ -97,6 +97,7 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath9k-eeprom-ahb-18100000.wmac.bin")
        case $board in
+       iodata,wn-ac1167dgr|\
        iodata,wn-ac1600dgr2)
                ath9k_eeprom_extract "art" 4096 1088
                ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 2
index d8254e3..8ede82c 100644 (file)
@@ -87,6 +87,7 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/cal-pci-0000:00:00.0.bin")
        case $board in
+       iodata,wn-ac1167dgr|\
        iodata,wn-ac1600dgr2)
                ath10kcal_extract "art" 20480 2116
                ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi b/target/linux/ath79/dts/qca9557_iodata_wn-ac-dgr.dtsi
new file mode 100644 (file)
index 0000000..04eaca8
--- /dev/null
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557.dtsi"
+
+/ {
+       aliases {
+               led-boot = &power;
+               led-failsafe = &power;
+               led-running = &power;
+               led-upgrade = &power;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               power: power {
+                       label = "iodata:green:power";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+                       default-state = "on";
+               };
+
+               copy {
+                       label = "iodata:green:copy";
+                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               eco {
+                       label = "iodata:green:eco";
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+
+               wlan5g {
+                       label = "iodata:green:wlan5g";
+                       gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wlan2g {
+                       label = "iodata:green:wlan2g";
+                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+                       linux,default-trigger = "phy1tpt";
+               };
+
+               notification {
+                       label = "iodata:amber:notification";
+                       gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+               };
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <20>;
+
+               button_eco {
+                       label = "eco";
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_1>;
+                       debounce-interval = <60>;
+               };
+
+               auto {
+                       label = "auto";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
+                       debounce-interval = <60>;
+               };
+
+               button_copy {
+                       label = "copy";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_1>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               router {
+                       label = "router";
+                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+                       linux,input-type = <EV_SW>;
+                       debounce-interval = <60>;
+               };
+       };
+};
+
+&spi {
+       status = "okay";
+       num-cs = <1>;
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x000000 0x030000>;
+                               read-only;
+                       };
+
+                       partition@30000 {
+                               label = "u-boot-env";
+                               reg = <0x030000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@40000 {
+                               label = "firmware";
+                               reg = <0x040000 0xe50000>;
+                       };
+
+                       partition@e90000 {
+                               label = "manufacture";
+                               reg = <0xe90000 0x100000>;
+                               read-only;
+                       };
+
+                       partition@f90000 {
+                               label = "backup";
+                               reg = <0xf90000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@fa0000 {
+                               label = "storage";
+                               reg = <0xfa0000 0x050000>;
+                               read-only;
+                       };
+
+                       art: partition@ff0000 {
+                               label = "art";
+                               reg = <0xff0000 0x010000>;
+                               read-only;
+                       };
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+
+               qca,ar8327-initvals = <
+                       0x04 0x87600000 /* PORT0 PAD MODE CTRL */
+                       0x7c 0x0000007e /* PORT0_STATUS */
+               >;
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       pll-data = <0x56000000 0x00000101 0x00001616>;
+       phy-handle = <&phy0>;
+};
+
+&pcie1 {
+       status = "okay";
+
+       wifi@0,0 {
+               compatible = "pci168c,003c";
+               reg = <0x0000 0 0 0 0>;
+               qca,no-eeprom;
+       };
+};
+
+&uart {
+       status = "okay";
+};
+
+&usb_phy0 {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&wmac {
+       status = "okay";
+       qca,no-eeprom;
+};
diff --git a/target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts b/target/linux/ath79/dts/qca9557_iodata_wn-ac1167dgr.dts
new file mode 100644 (file)
index 0000000..7990d9c
--- /dev/null
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557_iodata_wn-ac-dgr.dtsi"
+
+/ {
+       compatible = "iodata,wn-ac1167dgr", "qca,qca9557";
+       model = "I-O DATA WN-AC1167DGR";
+};
index 67db0ee..3eedec7 100644 (file)
@@ -4,216 +4,9 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
-#include "qca9557.dtsi"
+#include "qca9557_iodata_wn-ac-dgr.dtsi"
 
 / {
        compatible = "iodata,wn-ac1600dgr2", "qca,qca9557";
        model = "I-O DATA WN-AC1600DGR2";
-
-       aliases {
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-               led-upgrade = &power;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               power: power {
-                       label = "wn-ac1600dgr2:green:power";
-                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-
-               copy {
-                       label = "wn-ac1600dgr2:green:copy";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-
-               eco {
-                       label = "wn-ac1600dgr2:green:eco";
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-
-               wlan5g {
-                       label = "wn-ac1600dgr2:green:wlan5g";
-                       gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-                       linux,default-trigger = "phy0tpt";
-               };
-
-               wlan2g {
-                       label = "wn-ac1600dgr2:green:wlan2g";
-                       gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-                       linux,default-trigger = "phy1tpt";
-               };
-
-               notification {
-                       label = "wn-ac1600dgr2:amber:notification";
-                       gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys-polled";
-               poll-interval = <20>;
-
-               button_eco {
-                       label = "eco";
-                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_1>;
-                       debounce-interval = <60>;
-               };
-
-               auto {
-                       label = "auto";
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_0>;
-                       linux,input-type = <EV_SW>;
-                       debounce-interval = <60>;
-               };
-
-               button_copy {
-                       label = "copy";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_1>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-               };
-
-               router {
-                       label = "router";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-                       linux,code = <BTN_0>;
-                       linux,input-type = <EV_SW>;
-                       debounce-interval = <60>;
-               };
-       };
-};
-
-&spi {
-       status = "okay";
-       num-cs = <1>;
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x030000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               label = "u-boot-env";
-                               reg = <0x030000 0x010000>;
-                               read-only;
-                       };
-
-                       partition@40000 {
-                               label = "firmware";
-                               reg = <0x040000 0xe50000>;
-                       };
-
-                       partition@e90000 {
-                               label = "manufacture";
-                               reg = <0xe90000 0x100000>;
-                               read-only;
-                       };
-
-                       partition@f90000 {
-                               label = "backup";
-                               reg = <0xf90000 0x010000>;
-                               read-only;
-                       };
-
-                       partition@fa0000 {
-                               label = "storage";
-                               reg = <0xfa0000 0x050000>;
-                               read-only;
-                       };
-
-                       art: partition@ff0000 {
-                               label = "art";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&mdio0 {
-       status = "okay";
-
-       phy0: ethernet-phy@0 {
-               reg = <0>;
-
-               qca,ar8327-initvals = <
-                       0x04 0x87600000 /* PORT0 PAD MODE CTRL */
-                       0x7c 0x0000007e /* PORT0_STATUS */
-               >;
-       };
-};
-
-&eth0 {
-       status = "okay";
-
-       pll-data = <0x56000000 0x00000101 0x00001616>;
-       phy-handle = <&phy0>;
-};
-
-&pcie1 {
-       status = "okay";
-
-       wifi@0,0 {
-               compatible = "pci168c,003c";
-               reg = <0x0000 0 0 0 0>;
-               qca,no-eeprom;
-       };
-};
-
-&uart {
-       status = "okay";
-};
-
-&usb_phy0 {
-       status = "okay";
-};
-
-&usb0 {
-       status = "okay";
-};
-
-&wmac {
-       status = "okay";
-       qca,no-eeprom;
 };
index 6681bcf..b3eaee4 100644 (file)
@@ -67,6 +67,18 @@ define Device/glinet_ar300m_nor
 endef
 TARGET_DEVICES += glinet_ar300m_nor
 
+define Device/iodata_wn-ac1167dgr
+  ATH_SOC := qca9557
+  DEVICE_TITLE := I-O DATA WN-AC1167DGR
+  IMAGE_SIZE := 14656k
+  IMAGES += factory.bin
+  IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+    append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \
+    senao-header -r 0x30a -p 0x61 -t 2
+  DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
+endef
+TARGET_DEVICES += iodata_wn-ac1167dgr
+
 define Device/iodata_wn-ac1600dgr2
   ATH_SOC := qca9557
   DEVICE_TITLE := I-O DATA WN-AC1600DGR2