From: Davide Ammirata Date: Thu, 3 May 2018 15:59:27 +0000 (+0000) Subject: ramips: add support for mqmaker witi 512mb version X-Git-Tag: v18.06.0-rc1~233 X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=commitdiff_plain;h=004cc22e4ef8187dd80d5d6be5a2575453ef3699 ramips: add support for mqmaker witi 512mb version Splitted out the dts file and create the new dts for the 256 MByte RAM and the 512 MB RAM version. Migrate both versions to the common board detection. The install the 512 MByte Version on a board running the 256 MByte image, a forceful sysupgrade with the -F flag is required. Signed-off-by: Davide Ammirata --- diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 5d25cdba96..2c92a6a93b 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -113,7 +113,8 @@ ramips_setup_interfaces() vr500|\ wf-2881|\ whr-g300n|\ - witi|\ + mqmaker,witi-256m|\ + mqmaker,witi-512m|\ wl-wn575a3|\ wndr3700v5|\ youku-yk1|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index d84bdff3a7..6a51778726 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -279,7 +279,8 @@ get_status_led() { status_led="$boardname:green:status" ;; w306r-v20|\ - witi|\ + mqmaker,witi-256m|\ + mqmaker,witi-512m|\ zbt-wr8305rt) status_led="$boardname:green:sys" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 75474fbc6d..8c151552dc 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -577,9 +577,6 @@ ramips_board_detect() { *"WHR-G300N") name="whr-g300n" ;; - *"WiTi") - name="witi" - ;; *"WIZARD 8800") name="wizard8800" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index ff73d6474b..e90b560731 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -173,7 +173,8 @@ platform_check_image() { whr-g300n|\ widora,neo-16m|\ widora,neo-32m|\ - witi|\ + mqmaker,witi-256m|\ + mqmaker,witi-512m|\ wizfi630a|\ wl-330n|\ wl-330n3g|\ diff --git a/target/linux/ramips/base-files/sbin/fixup-mac-address b/target/linux/ramips/base-files/sbin/fixup-mac-address index 98264c082e..309db8ce45 100755 --- a/target/linux/ramips/base-files/sbin/fixup-mac-address +++ b/target/linux/ramips/base-files/sbin/fixup-mac-address @@ -9,7 +9,8 @@ YES= board=$(board_name) case $board in - witi) + mqmaker,witi-256m|\ + mqmaker,witi-512m) partname=factory offset=$((0xe000)) ;; diff --git a/target/linux/ramips/dts/WITI-256M.dts b/target/linux/ramips/dts/WITI-256M.dts new file mode 100644 index 0000000000..4c12d8c3b5 --- /dev/null +++ b/target/linux/ramips/dts/WITI-256M.dts @@ -0,0 +1,13 @@ +/dts-v1/; + +#include "WITI.dtsi" + +/ { + compatible = "mqmaker,witi-256m", "mqmaker,witi", "mediatek,mt7621-soc"; + model = "MQmaker WiTi (256MB RAM)"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; +}; diff --git a/target/linux/ramips/dts/WITI-512M.dts b/target/linux/ramips/dts/WITI-512M.dts new file mode 100644 index 0000000000..b249075534 --- /dev/null +++ b/target/linux/ramips/dts/WITI-512M.dts @@ -0,0 +1,13 @@ +/dts-v1/; + +#include "WITI.dtsi" + +/ { + compatible = "mqmaker,witi-512m", "mqmaker,witi", "mediatek,mt7621-soc"; + model = "MQmaker WiTi (512MB RAM)"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x1c000000>, <0x20000000 0x4000000>; + }; +}; diff --git a/target/linux/ramips/dts/WITI.dts b/target/linux/ramips/dts/WITI.dts deleted file mode 100644 index 097c8163ff..0000000000 --- a/target/linux/ramips/dts/WITI.dts +++ /dev/null @@ -1,121 +0,0 @@ -/dts-v1/; - -#include "mt7621.dtsi" - -#include -#include - -/ { - compatible = "mqmaker,witi", "mediatek,mt7621-soc"; - model = "MQmaker WiTi"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x10000000>; - }; - - chosen { - bootargs = "console=ttyS0,57600"; - }; - - palmbus: palmbus@1E000000 { - i2c@900 { - status = "okay"; - - pcf8563: rtc@51 { - status = "okay"; - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <20>; - - reset { - label = "reset"; - gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&sdhci { - status = "okay"; -}; - -&spi0 { - status = "okay"; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - m25p,chunked-io = <32>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - }; - - partition@50000 { - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; -}; - -&pcie { - status = "okay"; - - pcie0 { - mt76@0,0 { - reg = <0x0000 0 0 0 0>; - device_type = "pci"; - mediatek,mtd-eeprom = <&factory 0x8000>; - ieee80211-freq-limit = <5000000 6000000>; - mtd-mac-address = <&factory 0xe000>; - }; - }; - - pcie1 { - mt76@1,0 { - reg = <0x0000 0 0 0 0>; - device_type = "pci"; - mediatek,mtd-eeprom = <&factory 0x0000>; - ieee80211-freq-limit = <2400000 2500000>; - mtd-mac-address = <&factory 0xe000>; - }; - }; -}; - -ðernet { - mtd-mac-address = <&factory 0xe000>; -}; - -&pinctrl { - state_default: pinctrl0 { - gpio { - ralink,group = "wdt", "rgmii2", "jtag", "mdio"; - ralink,function = "gpio"; - }; - }; -}; diff --git a/target/linux/ramips/dts/WITI.dtsi b/target/linux/ramips/dts/WITI.dtsi new file mode 100644 index 0000000000..767ea03ff0 --- /dev/null +++ b/target/linux/ramips/dts/WITI.dtsi @@ -0,0 +1,115 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "mqmaker,witi", "mediatek,mt7621-soc"; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + palmbus: palmbus@1E000000 { + i2c@900 { + status = "okay"; + + pcf8563: rtc@51 { + status = "okay"; + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&sdhci { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; +}; + +&pcie { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + mtd-mac-address = <&factory 0xe000>; + }; + }; + + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0000>; + ieee80211-freq-limit = <2400000 2500000>; + mtd-mac-address = <&factory 0xe000>; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0xe000>; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wdt", "rgmii2", "jtag", "mdio"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index d78175cf74..b84b74a5b0 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -310,15 +310,26 @@ define Device/wf-2881 endef TARGET_DEVICES += wf-2881 -define Device/witi - DTS := WITI +define Device/mqmaker_witi-256m + DTS := WITI-256M IMAGE_SIZE := $(ralink_default_fw_size_16M) - DEVICE_TITLE := MQmaker WiTi + DEVICE_TITLE := MQmaker WiTi (256MB RAM) DEVICE_PACKAGES := \ kmod-ata-core kmod-ata-ahci kmod-mt76x2 kmod-sdhci-mt7620 kmod-usb3 \ kmod-usb-ledtrig-usbport wpad-mini + SUPPORTED_DEVICES += witi endef -TARGET_DEVICES += witi +TARGET_DEVICES += mqmaker_witi-256m + +define Device/mqmaker_witi-512m + DTS := WITI-512M + IMAGE_SIZE := $(ralink_default_fw_size_16M) + DEVICE_TITLE := MQmaker WiTi (512MB RAM) + DEVICE_PACKAGES := \ + kmod-ata-core kmod-ata-ahci kmod-mt76x2 kmod-sdhci-mt7620 kmod-usb3 \ + kmod-usb-ledtrig-usbport wpad-mini +endef +TARGET_DEVICES += mqmaker_witi-512m define Device/wndr3700v5 DTS := WNDR3700V5