From: 张鹏 Date: Tue, 17 Jul 2018 10:11:21 +0000 (+0800) Subject: ar71xx:add support for E750A v4 X-Git-Tag: v18.06.0~5 X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=commitdiff_plain;h=11a5128b983fdc78ffeac063bf9060116cad281b ar71xx:add support for E750A v4 Qxwlan E750A v4 is based on Qualcomm QCA9344. Specification: - 560/450/225 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 5G GHz (AR9344) - 2x 10/100 Mbps Ethernet (one port with PoE support) - 1x miniPCIe slot (USB 2.0 bus only) - 7x LED (6 driven by GPIO) - 1x button (reset) - 1x DC jack for main power input (9-48 V) - UART (J23) and LEDs (J2) headers on PCB Flash instruction (using U-Boot CLI and tftp server): - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "sysupgrade" filename to "firmware.bin" and place it in tftp server directory. - Connect PC with one of RJ45 ports, power up the board and press "enter" key to access U-Boot CLI. - Use the following command to update the device to OpenWrt: "run lfw". Flash instruction (using U-Boot web-based recovery): - Configure PC with static IP 192.168.1.xxx(2-254)/24. - Connect PC with one of RJ45 ports, press the reset button, power up the board and keep button pressed for around 6-7 seconds, until LEDs start flashing. - Open your browser and enter 192.168.1.1, select "sysupgrade" image and click the upgrade button. Signed-off-by: 张鹏 (cherry picked from commit ac03d51a3f4daa2f6a2a83f041dcd71674a9f724) --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 635c57e87b..3b986c3403 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -66,7 +66,8 @@ cpe830|\ cpe870|\ dr531|\ e600g-v2|\ -e600gac-v2) +e600gac-v2|\ +e750a-v2) ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0" ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index c3656f54bc..98d58987ca 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -26,6 +26,7 @@ get_status_led() { e1700ac-v2|\ e558-v2|\ e600gac-v2|\ + e750a-v4|\ eap120|\ minibox-v1|\ packet-squirrel|\ diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 7be9a67da5..fb7328875f 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -684,6 +684,9 @@ ar71xx_board_detect() { *"E600GAC v2") name="e600gac-v2" ;; + *"E750A v4") + name="e750a-v4" + ;; *"EAP120") name="eap120" tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')" diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index f22e85e9eb..f171aa667c 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -253,6 +253,7 @@ platform_check_image() { e558-v2|\ e600g-v2|\ e600gac-v2|\ + e750a-v4|\ ebr-2310-c1|\ ens202ext|\ epg5000|\ diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9 index 0437c84ea8..70111e2eb1 100644 --- a/target/linux/ar71xx/config-4.9 +++ b/target/linux/ar71xx/config-4.9 @@ -103,6 +103,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_E2100L is not set # CONFIG_ATH79_MACH_E558_V2 is not set # CONFIG_ATH79_MACH_E600G_V2 is not set +# CONFIG_ATH79_MACH_E750A_V4 is not set # CONFIG_ATH79_MACH_EAP120 is not set # CONFIG_ATH79_MACH_EAP300V2 is not set # CONFIG_ATH79_MACH_EAP7660D is not set diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 53bf35f718..14cd19f1f2 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -733,6 +733,17 @@ config ATH79_MACH_E600G_V2 select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_E750A_V4 + bool "Qxwlan E750A v4 support" + select SOC_AR934X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_ESR900 bool "EnGenius ESR900 board support" select SOC_QCA955X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index babcfa7dfe..84b61dff9c 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -114,6 +114,7 @@ obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o obj-$(CONFIG_ATH79_MACH_E1700AC_V2) += mach-e1700ac-v2.o obj-$(CONFIG_ATH79_MACH_E558_V2) += mach-e558-v2.o obj-$(CONFIG_ATH79_MACH_E600G_V2) += mach-e600g-v2.o +obj-$(CONFIG_ATH79_MACH_E750A_V4) += mach-e750a-v4.o obj-$(CONFIG_ATH79_MACH_EAP120) += mach-eap120.o obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e750a-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e750a-v4.c new file mode 100644 index 0000000000..7cf3292c68 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-e750a-v4.c @@ -0,0 +1,122 @@ +/* + * Qxwlan E750A v4 board support + * + * Copyright (C) 2017 Peng Zhang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "pci.h" + +#define E750A_V4_GPIO_LED_SYS 14 +#define E750A_V4_GPIO_LED_LAN 19 +#define E750A_V4_GPIO_LED_WAN 18 +#define E750A_V4_GPIO_LED_DS10 15 +#define E750A_V4_GPIO_LED_DS20 20 +#define E750A_V4_GPIO_LED_WLAN 21 + +#define E750A_V4_GPIO_BTN_RESET 12 + +#define E750A_V4_KEYS_POLL_INTERVAL 20 /* msecs */ +#define E750A_V4_KEYS_DEBOUNCE_INTERVAL (3 * E750A_V4_KEYS_POLL_INTERVAL) + +static struct gpio_led e750a_v4_leds_gpio[] __initdata = { + { + .name = "e750a-v4:green:system", + .gpio = E750A_V4_GPIO_LED_SYS, + .active_low = 1, + }, + { + .name = "e750a-v4:green:lan", + .gpio = E750A_V4_GPIO_LED_LAN, + .active_low = 1, + }, + { + .name = "e750a-v4:green:wan", + .gpio = E750A_V4_GPIO_LED_WAN, + .active_low = 1, + }, + { + .name = "e750a-v4:green:wlan", + .gpio = E750A_V4_GPIO_LED_WLAN, + .active_low = 1, + }, + { + .name = "e750a-v4:green:ds10", + .gpio = E750A_V4_GPIO_LED_DS10, + .active_low = 1, + }, + { + .name = "e750a-v4:green:ds20", + .gpio = E750A_V4_GPIO_LED_DS20, + .active_low = 1, + }, +}; + +static struct gpio_keys_button e750a_v4_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = E750A_V4_KEYS_DEBOUNCE_INTERVAL, + .gpio = E750A_V4_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + + +static void __init e750a_v4_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f050400); + u8 *art = (u8 *) KSEG1ADDR(0x1f061000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(e750a_v4_leds_gpio), + e750a_v4_leds_gpio); + ath79_register_gpio_keys_polled(-1, E750A_V4_KEYS_POLL_INTERVAL, + ARRAY_SIZE(e750a_v4_gpio_keys), + e750a_v4_gpio_keys); + + ath79_register_mdio(1, 0x0); + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); + + /* GMAC1 is connected to the internal switch */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); + ath79_register_eth(1); + + /* GMAC0 is connected to the PHY4 of the internal switch */ + ath79_switch_data.phy4_mii_en = 1; + ath79_switch_data.phy_poll_mask = BIT(4); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(4); + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); + ath79_register_eth(0); + + ath79_register_pci(); + ath79_register_usb(); + ath79_register_wmac(art, NULL); +} + +MIPS_MACHINE(ATH79_MACH_E750A_V4, "E750A-V4", "Qxlan E750A v4", + e750a_v4_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 87e7c4c01c..c33c02037d 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -108,6 +108,7 @@ enum ath79_mach_type { ATH79_MACH_E558_V2, /* Qxwlan E558 v2 */ ATH79_MACH_E600G_V2, /* Qxwlan E600G v2 */ ATH79_MACH_E600GAC_V2, /* Qxwlan E600GAC v2 */ + ATH79_MACH_E750A_V4, /* Qxwlan E750A v4 */ ATH79_MACH_EAP120, /* TP-LINK EAP120 */ ATH79_MACH_EAP300V2, /* EnGenius EAP300 v2 */ ATH79_MACH_EAP7660D, /* Senao EAP7660D */ diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default index 753564015f..2f9e1b700d 100644 --- a/target/linux/ar71xx/generic/config-default +++ b/target/linux/ar71xx/generic/config-default @@ -76,6 +76,7 @@ CONFIG_ATH79_MACH_E1700AC_V2=y CONFIG_ATH79_MACH_E2100L=y CONFIG_ATH79_MACH_E558_V2=y CONFIG_ATH79_MACH_E600G_V2=y +CONFIG_ATH79_MACH_E750A_V4=y CONFIG_ATH79_MACH_EAP120=y CONFIG_ATH79_MACH_EAP300V2=y CONFIG_ATH79_MACH_EAP7660D=y diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index 54f69b610b..ba7374ecc3 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -392,6 +392,25 @@ define Device/e600gac-v2-8M endef TARGET_DEVICES += e600gac-v2-8M +define Device/e750a-v4-16M + DEVICE_TITLE := Qxwlan E750A v4 (16MB flash) + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 -swconfig + BOARDNAME := E750A-V4 + SUPPORTED_DEVICES := e750a-v4 + IMAGE_SIZE := 15936k + MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art),-(firmware) + IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\ + append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) +endef +TARGET_DEVICES += e750a-v4-16M + +define Device/e750a-v4-8M + $(Device/e750a-v4-16M) + DEVICE_TITLE := Qxwlan E750A v4 (8MB flash) + IMAGE_SIZE := 7744k +endef +TARGET_DEVICES += e750a-v4-8M + define Device/ew-balin DEVICE_TITLE := Embedded Wireless Balin Platform DEVICE_PACKAGES := kmod-usb-core kmod-usb-chipidea