From: Imre Kaloz Date: Tue, 23 Feb 2010 10:43:53 +0000 (+0000) Subject: add 2.6.32 support X-Git-Tag: reboot~20948 X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=commitdiff_plain;h=437f2bd5c1001f30bc06ee334f7935d0e4de2551 add 2.6.32 support SVN-Revision: 19823 --- diff --git a/target/linux/ubicom32/config-2.6.30 b/target/linux/ubicom32/config-2.6.30 deleted file mode 100755 index 47cb52995b..0000000000 --- a/target/linux/ubicom32/config-2.6.30 +++ /dev/null @@ -1,175 +0,0 @@ -# CONFIG_ACCESS_OK_CHECKS_ENABLED is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_SUPPORTS_AOUT=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_ARPD is not set -# CONFIG_BINARY_PRINTF is not set -CONFIG_BINFMT_ELF_FDPIC=y -CONFIG_BINFMT_FLAT=y -# CONFIG_BINFMT_SHARED_FLAT is not set -CONFIG_BINFMT_ZFLAT=y -CONFIG_BITREVERSE=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM=y -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyUM0 console=ttyUS0 serdes=0x02004000,61,250000000" -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CRC_CCITT=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_RNG2=y -# CONFIG_CRYPTO_UBICOM32 is not set -CONFIG_CRYPTO_WORKQUEUE=y -# CONFIG_DEBUG_FS is not set -# CONFIG_DEBUG_IRQMEASURE is not set -# CONFIG_DEBUG_PCIMEASURE is not set -CONFIG_DEBUG_VERBOSE=y -CONFIG_DECOMPRESS_LZMA=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_DEFAULT_NOOP=y -CONFIG_DEVKMEM=y -CONFIG_DEVPORT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_EPOLL is not set -# CONFIG_EVENTFD is not set -CONFIG_FORCE_MAX_ZONEORDER=14 -# CONFIG_FPU is not set -# CONFIG_FUTEX is not set -# CONFIG_FW_LOADER is not set -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GEN_RTC is not set -CONFIG_GPIOLIB=y -# CONFIG_HAMRADIO is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAVE_CLK=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_HW_RANDOM_UBICOM32=y -CONFIG_HW_RANDOM=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -CONFIG_INITRAMFS_ROOT_GID=0 -CONFIG_INITRAMFS_ROOT_UID=0 -CONFIG_INITRAMFS_SOURCE="../romfs ../vendors/Ubicom/RouterGateway/initramfs_list" -# CONFIG_INPUT_MISC is not set -CONFIG_INPUT_POLLDEV=y -CONFIG_INPUT=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IP5160DEV is not set -# CONFIG_IP5160EVAL is not set -# CONFIG_IP5170DPF is not set -# CONFIG_IP7145DPF is not set -# CONFIG_IP7160BRINGUP is not set -# CONFIG_IP7160DPF is not set -# CONFIG_IP7160RGWLCD is not set -CONFIG_IP7160RGW=y -# CONFIG_IP7500AV is not set -# CONFIG_IP7500IAP is not set -# CONFIG_IP7500MEDIA is not set -# CONFIG_IP7500MODULE is not set -# CONFIG_IP7500WSPKR is not set -CONFIG_IRQ_PER_CPU=y -# CONFIG_IRQSTACKS is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -# CONFIG_JFFS2_SUMMARY is not set -CONFIG_LDM_DEBUG=y -CONFIG_LDM_PARTITION=y -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_TRIGGERS is not set -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_LEGACY_PTYS=y -CONFIG_LIBCRC32C=y -# CONFIG_LINKER_RELAXATION is not set -CONFIG_MIN_RAMSIZE=0x02000000 -# CONFIG_MISC_DEVICES is not set -# CONFIG_MMC_UBICOM32 is not set -# CONFIG_MMU is not set -CONFIG_MODULE_FORCE_LOAD=y -# CONFIG_MODULE_UNLOAD is not set -# CONFIG_MTD_CFI is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_NAND_SPI_ER is not set -CONFIG_MTD_UBI32_M25P80=y -# CONFIG_MTD_UBI32_NAND_SPI_ER is not set -# CONFIG_NET_ETHERNET is not set -# CONFIG_NOBOARD is not set -CONFIG_NO_HZ=y -CONFIG_NO_IOPORT=y -# CONFIG_NO_KERNEL_MSG is not set -CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 -CONFIG_OCM_MODULES_FALLBACK_TO_DDR=y -CONFIG_OCM_MODULES_MAY_CONSUME_REMAINING_CODESPACE=y -CONFIG_OCM_MODULES_RESERVATION=41 -CONFIG_OLD_40400010_SYSTEM_CALL=y -# CONFIG_PACKET_MMAP is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI_DEV0_IDSEL=0x001000000 -CONFIG_PCI_DEV1_IDSEL=0x002000000 -CONFIG_PRINTK_TIME=y -CONFIG_PROTECT_KERNEL=y -CONFIG_RAMKERNEL=y -# CONFIG_RTC is not set -# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE=y -CONFIG_SERIAL_UBI32_MAILBOX=y -# CONFIG_SERIAL_UBI32_SERDES is not set -# CONFIG_SERIAL_UBI32_UARTTIO is not set -# CONFIG_SIGNALFD is not set -# CONFIG_SLOW_WORK is not set -# CONFIG_SND_UBI32 is not set -CONFIG_SPI_BITBANG=y -# CONFIG_SPI_GPIO is not set -CONFIG_SPI_MASTER=y -# CONFIG_SPI_SPIDEV is not set -CONFIG_SPI_UBICOM32_GPIO=y -CONFIG_SPI=y -# CONFIG_STOP_ON_BUG is not set -# CONFIG_STOP_ON_TRAP is not set -# CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_SYSFS_DEPRECATED=y -CONFIG_TIME_LOW_RES=y -CONFIG_TIMER_EXTRA_ALLOC=0 -# CONFIG_TIMERFD is not set -CONFIG_TRACING_SUPPORT=y -CONFIG_UBI32_WDT=y -CONFIG_UBICOM32_GMAC=y -CONFIG_UBICOM32_OCM_FOR_SKB=y -# CONFIG_UBICOM32_PLIO is not set -CONFIG_UBICOM32_V4=y -CONFIG_UBICOM32=y -# CONFIG_UBICOM_HID is not set -# CONFIG_UBICOM_INPUT_I2C is not set -CONFIG_UBICOM_INPUT=y -CONFIG_UBICOM_SWITCH_BCM539X=y -CONFIG_UBICOM_SWITCH=y -# CONFIG_UNALIGNED_ACCESS_DISABLED is not set -CONFIG_UNALIGNED_ACCESS_ENABLED=y -# CONFIG_UNALIGNED_ACCESS_USERSPACE_ONLY is not set -# CONFIG_WIRELESS_OLD_REGULATORY is not set diff --git a/target/linux/ubicom32/config-default b/target/linux/ubicom32/config-default new file mode 100755 index 0000000000..47cb52995b --- /dev/null +++ b/target/linux/ubicom32/config-default @@ -0,0 +1,175 @@ +# CONFIG_ACCESS_OK_CHECKS_ENABLED is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_AOUT=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_ARPD is not set +# CONFIG_BINARY_PRINTF is not set +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +CONFIG_BINFMT_ZFLAT=y +CONFIG_BITREVERSE=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyUM0 console=ttyUS0 serdes=0x02004000,61,250000000" +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CRC_CCITT=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_RNG2=y +# CONFIG_CRYPTO_UBICOM32 is not set +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_IRQMEASURE is not set +# CONFIG_DEBUG_PCIMEASURE is not set +CONFIG_DEBUG_VERBOSE=y +CONFIG_DECOMPRESS_LZMA=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_DEFAULT_NOOP=y +CONFIG_DEVKMEM=y +CONFIG_DEVPORT=y +CONFIG_EARLY_PRINTK=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_EPOLL is not set +# CONFIG_EVENTFD is not set +CONFIG_FORCE_MAX_ZONEORDER=14 +# CONFIG_FPU is not set +# CONFIG_FUTEX is not set +# CONFIG_FW_LOADER is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GEN_RTC is not set +CONFIG_GPIOLIB=y +# CONFIG_HAMRADIO is not set +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAVE_CLK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HW_RANDOM_UBICOM32=y +CONFIG_HW_RANDOM=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_SOURCE="../romfs ../vendors/Ubicom/RouterGateway/initramfs_list" +# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_POLLDEV=y +CONFIG_INPUT=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IP5160DEV is not set +# CONFIG_IP5160EVAL is not set +# CONFIG_IP5170DPF is not set +# CONFIG_IP7145DPF is not set +# CONFIG_IP7160BRINGUP is not set +# CONFIG_IP7160DPF is not set +# CONFIG_IP7160RGWLCD is not set +CONFIG_IP7160RGW=y +# CONFIG_IP7500AV is not set +# CONFIG_IP7500IAP is not set +# CONFIG_IP7500MEDIA is not set +# CONFIG_IP7500MODULE is not set +# CONFIG_IP7500WSPKR is not set +CONFIG_IRQ_PER_CPU=y +# CONFIG_IRQSTACKS is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +# CONFIG_JFFS2_SUMMARY is not set +CONFIG_LDM_DEBUG=y +CONFIG_LDM_PARTITION=y +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_TRIGGERS is not set +CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_LEGACY_PTYS=y +CONFIG_LIBCRC32C=y +# CONFIG_LINKER_RELAXATION is not set +CONFIG_MIN_RAMSIZE=0x02000000 +# CONFIG_MISC_DEVICES is not set +# CONFIG_MMC_UBICOM32 is not set +# CONFIG_MMU is not set +CONFIG_MODULE_FORCE_LOAD=y +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MTD_CFI is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_NAND_SPI_ER is not set +CONFIG_MTD_UBI32_M25P80=y +# CONFIG_MTD_UBI32_NAND_SPI_ER is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NOBOARD is not set +CONFIG_NO_HZ=y +CONFIG_NO_IOPORT=y +# CONFIG_NO_KERNEL_MSG is not set +CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1 +CONFIG_OCM_MODULES_FALLBACK_TO_DDR=y +CONFIG_OCM_MODULES_MAY_CONSUME_REMAINING_CODESPACE=y +CONFIG_OCM_MODULES_RESERVATION=41 +CONFIG_OLD_40400010_SYSTEM_CALL=y +# CONFIG_PACKET_MMAP is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PCI_DEV0_IDSEL=0x001000000 +CONFIG_PCI_DEV1_IDSEL=0x002000000 +CONFIG_PRINTK_TIME=y +CONFIG_PROTECT_KERNEL=y +CONFIG_RAMKERNEL=y +# CONFIG_RTC is not set +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_SCSI_DMA is not set +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_UBI32_MAILBOX_CONSOLE=y +CONFIG_SERIAL_UBI32_MAILBOX=y +# CONFIG_SERIAL_UBI32_SERDES is not set +# CONFIG_SERIAL_UBI32_UARTTIO is not set +# CONFIG_SIGNALFD is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_SND_UBI32 is not set +CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_MASTER=y +# CONFIG_SPI_SPIDEV is not set +CONFIG_SPI_UBICOM32_GPIO=y +CONFIG_SPI=y +# CONFIG_STOP_ON_BUG is not set +# CONFIG_STOP_ON_TRAP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_SYSFS_DEPRECATED=y +CONFIG_TIME_LOW_RES=y +CONFIG_TIMER_EXTRA_ALLOC=0 +# CONFIG_TIMERFD is not set +CONFIG_TRACING_SUPPORT=y +CONFIG_UBI32_WDT=y +CONFIG_UBICOM32_GMAC=y +CONFIG_UBICOM32_OCM_FOR_SKB=y +# CONFIG_UBICOM32_PLIO is not set +CONFIG_UBICOM32_V4=y +CONFIG_UBICOM32=y +# CONFIG_UBICOM_HID is not set +# CONFIG_UBICOM_INPUT_I2C is not set +CONFIG_UBICOM_INPUT=y +CONFIG_UBICOM_SWITCH_BCM539X=y +CONFIG_UBICOM_SWITCH=y +# CONFIG_UNALIGNED_ACCESS_DISABLED is not set +CONFIG_UNALIGNED_ACCESS_ENABLED=y +# CONFIG_UNALIGNED_ACCESS_USERSPACE_ONLY is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/atomic.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/atomic.h index 78d9fcd8f2..aaf7726020 100644 --- a/target/linux/ubicom32/files/arch/ubicom32/include/asm/atomic.h +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/atomic.h @@ -236,7 +236,12 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) +#include +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32) +#include +#else #include +#endif /* * The following is not a real function. The compiler should remove the function diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/bitsperlong.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/bitsperlong.h new file mode 100644 index 0000000000..6dc0bb0c13 --- /dev/null +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/bitsperlong.h @@ -0,0 +1 @@ +#include diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/page.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/page.h index 89c6ce61c7..1ecb174a65 100644 --- a/target/linux/ubicom32/files/arch/ubicom32/include/asm/page.h +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/page.h @@ -28,10 +28,12 @@ #ifndef _ASM_UBICOM32_PAGE_H #define _ASM_UBICOM32_PAGE_H +#include + /* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (1 << PAGE_SHIFT) +#define PAGE_SHIFT (12) +#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) #include @@ -99,7 +101,15 @@ extern unsigned long memory_end; #endif /* __ASSEMBLY__ */ -#ifdef __KERNEL__ +#define VM_DATA_DEFAULT_FLAGS \ + (VM_READ | VM_WRITE | \ + ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#include +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32) +#include +#else #include #endif diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/pgtable.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/pgtable.h index 70ad115ccf..ffb30a9ecf 100644 --- a/target/linux/ubicom32/files/arch/ubicom32/include/asm/pgtable.h +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/pgtable.h @@ -114,11 +114,15 @@ extern inline void flush_pages_to_ram (unsigned long address, int n) #define VMALLOC_START 0 #define VMALLOC_END 0xffffffff +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32) +#include +#else #define arch_enter_lazy_mmu_mode() do {} while (0) #define arch_leave_lazy_mmu_mode() do {} while (0) #define arch_flush_lazy_mmu_mode() do {} while (0) #define arch_enter_lazy_cpu_mode() do {} while (0) #define arch_leave_lazy_cpu_mode() do {} while (0) #define arch_flush_lazy_cpu_mode() do {} while (0) +#endif #endif /* _ASM_UBICOM32_PGTABLE_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/signal.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/signal.h index a334e19ea3..946b3f77d6 100644 --- a/target/linux/ubicom32/files/arch/ubicom32/include/asm/signal.h +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/signal.h @@ -124,7 +124,12 @@ typedef struct { #define MINSIGSTKSZ 2048 #define SIGSTKSZ 8192 +#include +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32) +#include +#else #include +#endif #ifdef __KERNEL__ struct old_sigaction { diff --git a/target/linux/ubicom32/files/arch/ubicom32/include/asm/socket.h b/target/linux/ubicom32/files/arch/ubicom32/include/asm/socket.h index 2d95c24f78..24ac113140 100644 --- a/target/linux/ubicom32/files/arch/ubicom32/include/asm/socket.h +++ b/target/linux/ubicom32/files/arch/ubicom32/include/asm/socket.h @@ -84,4 +84,7 @@ #define SO_TIMESTAMPING 37 #define SCM_TIMESTAMPING SO_TIMESTAMPING +#define SO_PROTOCOL 38 +#define SO_DOMAIN 39 + #endif /* _ASM_UBICOM32_SOCKET_H */ diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/init_task.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/init_task.c index ff0634424d..58baf52709 100644 --- a/target/linux/ubicom32/files/arch/ubicom32/kernel/init_task.c +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/init_task.c @@ -34,12 +34,15 @@ #include #include #include +#include ///static struct fs_struct init_fs = INIT_FS; static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); +#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,32) struct mm_struct init_mm = INIT_MM(init_mm); EXPORT_SYMBOL(init_mm); +#endif /* * Initial task structure. diff --git a/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_device.c b/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_device.c index d2d094d37a..1943cbb9ee 100644 --- a/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_device.c +++ b/target/linux/ubicom32/files/arch/ubicom32/kernel/timer_device.c @@ -169,7 +169,7 @@ static struct clocksource timer_device_clockbase = { * timer_device_alloc_event() * Allocate a timer device event. */ -static int timer_device_alloc_event(const char *name, int cpuid, const cpumask_t *mask) +static int timer_device_alloc_event(const char *name, int cpuid, const struct cpumask *cpumask) { struct clock_event_device *dev; struct irqaction *action; @@ -208,10 +208,10 @@ static int timer_device_alloc_event(const char *name, int cpuid, const cpumask_t action->name = name; action->flags = IRQF_DISABLED | IRQF_TIMER; action->handler = timer_device_event; - cpumask_copy(&action->mask, mask); + //cpumask_copy(&action->mask, mask); action->dev_id = dev; setup_irq(dev->irq, action); - irq_set_affinity(dev->irq, mask); + irq_set_affinity(dev->irq, cpumask); ldsr_disable_vector(dev->irq); /* @@ -229,7 +229,7 @@ static int timer_device_alloc_event(const char *name, int cpuid, const cpumask_t dev->mult = div_sc(frequency, NSEC_PER_SEC, dev->shift); dev->max_delta_ns = clockevent_delta2ns(0xffffffff, dev); dev->min_delta_ns = clockevent_delta2ns(100, dev); - dev->cpumask = mask; + //dev->cpumask = mask; printk(KERN_NOTICE "timer[%d]: %s - created\n", dev->irq, dev->name); /* @@ -246,7 +246,7 @@ static int timer_device_alloc_event(const char *name, int cpuid, const cpumask_t */ int __cpuinit local_timer_setup(unsigned int cpu) { - return timer_device_alloc_event("timer-cpu", cpu, cpumask_of(cpu)); + return timer_device_alloc_event("timer-cpu", cpu); } #endif @@ -283,19 +283,19 @@ void timer_device_init(void) /* * Always allocate a primary timer. */ - timer_device_alloc_event("timer-primary", -1, CPU_MASK_ALL_PTR); + timer_device_alloc_event("timer-primary", -1, cpu_all_mask); #if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) /* * If BROADCAST is selected we need to add a broadcast timer. */ - timer_device_alloc_event("timer-broadcast", -1, CPU_MASK_ALL_PTR); + timer_device_alloc_event("timer-broadcast", -1, cpu_all_mask); #endif /* * Allocate extra timers that are requested. */ for (i = 0; i < CONFIG_TIMER_EXTRA_ALLOC; i++) { - timer_device_alloc_event("timer-extra", -1, CPU_MASK_ALL_PTR); + timer_device_alloc_event("timer-extra", -1, cpu_all_mask); } } diff --git a/target/linux/ubicom32/files/drivers/net/ubi32-eth.c b/target/linux/ubicom32/files/drivers/net/ubi32-eth.c index e6c7392e06..e9c62f4625 100644 --- a/target/linux/ubicom32/files/drivers/net/ubi32-eth.c +++ b/target/linux/ubicom32/files/drivers/net/ubi32-eth.c @@ -634,6 +634,19 @@ void ubi32_eth_cleanup(void) } } + static const struct net_device_ops ubi32_netdev_ops = { + .ndo_open = ubi32_eth_open, + .ndo_stop = ubi32_eth_close, + .ndo_start_xmit = ubi32_eth_start_xmit, + .ndo_tx_timeout = ubi32_eth_tx_timeout, + .ndo_do_ioctl = ubi32_eth_ioctl, + .ndo_change_mtu = ubi32_eth_change_mtu, + .ndo_set_config = ubi32_eth_set_config, + .ndo_get_stats = ubi32_eth_get_stats, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + }; + int ubi32_eth_init_module(void) { struct ethtionode *eth_node; @@ -706,16 +719,9 @@ int ubi32_eth_init_module(void) spin_lock_init(&priv->lock); - dev->open = ubi32_eth_open; - dev->stop = ubi32_eth_close; - dev->hard_start_xmit = ubi32_eth_start_xmit; - dev->tx_timeout = ubi32_eth_tx_timeout; - dev->watchdog_timeo = UBI32_ETH_VP_TX_TIMEOUT; + dev->netdev_ops = &ubi32_netdev_ops; - dev->set_config = ubi32_eth_set_config; - dev->do_ioctl = ubi32_eth_ioctl; - dev->get_stats = ubi32_eth_get_stats; - dev->change_mtu = ubi32_eth_change_mtu; + dev->watchdog_timeo = UBI32_ETH_VP_TX_TIMEOUT; #ifdef UBICOM32_USE_NAPI netif_napi_add(dev, &priv->napi, ubi32_eth_napi_poll, UBI32_ETH_NAPI_WEIGHT); #endif diff --git a/target/linux/ubicom32/files/drivers/serial/ubi32_mailbox.c b/target/linux/ubicom32/files/drivers/serial/ubi32_mailbox.c index fc0d6d21b6..f14fcdfd9a 100644 --- a/target/linux/ubicom32/files/drivers/serial/ubi32_mailbox.c +++ b/target/linux/ubicom32/files/drivers/serial/ubi32_mailbox.c @@ -34,6 +34,7 @@ #include #include #include +#include #include @@ -259,8 +260,13 @@ static void ubi32_mailbox_enable_ms(struct uart_port *port) static void ubi32_mailbox_rx_chars(struct ubi32_mailbox_port *uart) { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32) + struct uart_state *state = uart->port.state; + struct tty_struct *tty = state->port.tty; +#else struct uart_info *info = uart->port.info; struct tty_struct *tty = info->port.tty; +#endif unsigned int status, ch, flg; status = 0; // XXX? UART_GET_LSR(uart); @@ -308,7 +314,11 @@ static void ubi32_mailbox_rx_chars(struct ubi32_mailbox_port *uart) static void ubi32_mailbox_tx_chars(struct ubi32_mailbox_port *uart) { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,32) + struct circ_buf *xmit = &uart->port.state->xmit; +#else struct circ_buf *xmit = &uart->port.info->xmit; +#endif if (uart->port.x_char) { UART_PUT_CHAR(uart, uart->port.x_char); diff --git a/target/linux/ubicom32/patches-2.6.32/100-ubicom32_support.patch b/target/linux/ubicom32/patches-2.6.32/100-ubicom32_support.patch new file mode 100644 index 0000000000..e16ec7ddab --- /dev/null +++ b/target/linux/ubicom32/patches-2.6.32/100-ubicom32_support.patch @@ -0,0 +1,1725 @@ +--- a/drivers/char/hw_random/Kconfig ++++ b/drivers/char/hw_random/Kconfig +@@ -186,3 +186,16 @@ config HW_RANDOM_MXC_RNGA + module will be called mxc-rnga. + + If unsure, say Y. ++ ++config HW_RANDOM_UBICOM32 ++ tristate "Ubicom32 HW Random Number Generator support" ++ depends on HW_RANDOM && UBICOM32 ++ default HW_RANDOM ++ ---help--- ++ This driver provides kernel-side support for the Random Number ++ Generator hardware found on Ubicom32 processors. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called pasemi-rng. ++ ++ If unsure, say Y. +--- a/drivers/char/hw_random/Makefile ++++ b/drivers/char/hw_random/Makefile +@@ -18,3 +18,4 @@ obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio + obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o + obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o + obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o ++obj-$(CONFIG_HW_RANDOM_UBICOM32) += ubicom32-rng.o +--- a/drivers/crypto/Kconfig ++++ b/drivers/crypto/Kconfig +@@ -61,6 +61,40 @@ config CRYPTO_DEV_GEODE + To compile this driver as a module, choose M here: the module + will be called geode-aes. + ++config CRYPTO_UBICOM32 ++ bool "Ubicom32 Security Module" ++ depends on UBICOM32 ++ help ++ This is the ubicom32 hardware acceleration common code. ++ ++config CRYPTO_AES_UBICOM32 ++ tristate "Ubicom32 AES implementation" ++ depends on CRYPTO_UBICOM32 ++ select CRYPTO_ALGAPI ++ help ++ This is the ubicom32 hardware AES implementation. ++ ++config CRYPTO_DES_UBICOM32 ++ tristate "Ubicom32 DES implementation" ++ depends on CRYPTO_UBICOM32 ++ select CRYPTO_ALGAPI ++ help ++ This is the ubicom32 hardware DES and 3DES implementation. ++ ++config CRYPTO_SHA1_UBICOM32 ++ tristate "Ubicom32 SHA1 implementation" ++ depends on CRYPTO_UBICOM32 ++ select CRYPTO_ALGAPI ++ help ++ This is the ubicom32 hardware SHA1 implementation. ++ ++config CRYPTO_MD5_UBICOM32 ++ tristate "Ubicom32 MD5 implementation" ++ depends on CRYPTO_UBICOM32 ++ select CRYPTO_ALGAPI ++ help ++ This is the ubicom32 hardware MD5 implementation. ++ + config ZCRYPT + tristate "Support for PCI-attached cryptographic adapters" + depends on S390 +--- a/drivers/mmc/host/Kconfig ++++ b/drivers/mmc/host/Kconfig +@@ -382,3 +382,10 @@ config MMC_VIA_SDMMC + If you have a controller with this interface, say Y or M here. + + If unsure, say N. ++ ++config MMC_UBICOM32 ++ tristate "Ubicom32 MMC/SD host controller" ++ depends on UBICOM32 ++ help ++ This provides support for the SD/MMC hardware found on Ubicom32 ++ IP7K processors +--- a/drivers/mmc/host/Makefile ++++ b/drivers/mmc/host/Makefile +@@ -35,6 +35,7 @@ obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o + obj-$(CONFIG_MMC_CB710) += cb710-mmc.o + obj-$(CONFIG_MMC_VIA_SDMMC) += via-sdmmc.o + obj-$(CONFIG_GPIOMMC) += gpiommc.o ++obj-$(CONFIG_MMC_UBICOM32) += ubicom32sd.o + + ifeq ($(CONFIG_CB710_DEBUG),y) + CFLAGS-cb710-mmc += -DDEBUG +--- a/drivers/mtd/devices/Kconfig ++++ b/drivers/mtd/devices/Kconfig +@@ -114,6 +114,31 @@ config MTD_SST25L + Set up your spi devices with the right board-specific platform data, + if you want to specify device partitioning. + ++config MTD_UBI32_NAND_SPI_ER ++ tristate "UBI32_NAND SPI-ER support" ++ help ++ This driver supports the Micron MT29F1G01 SPI-ER NAND flash chip ++ using the built in flash controller on the Ubicom32 architecture. ++ Partial page writes are not supported by this driver. ++ ++config MTD_NAND_SPI_ER ++ tristate "NAND SPI-ER support" ++ help ++ This driver supports the Micron MT29F1G01 SPI-ER NAND flash chip ++ using a generic SPI bus. Partial page writes are supported ++ by this driver. ++ ++config MTD_UBI32_M25P80 ++ tristate "Ubicom processor support for most SPI Flash chips (AT26DF, M25P, W25X, ...)" ++ depends on UBICOM32 ++ default y ++ help ++ This enables access to most modern SPI flash chips, used for ++ program and data storage. Series supported include Atmel AT26DF, ++ Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips ++ are supported as well. See the driver source for the current list, ++ or to add other chips. ++ + config MTD_SLRAM + tristate "Uncached system RAM" + help +--- a/drivers/mtd/devices/Makefile ++++ b/drivers/mtd/devices/Makefile +@@ -17,3 +17,6 @@ obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd + obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o + obj-$(CONFIG_MTD_M25P80) += m25p80.o + obj-$(CONFIG_MTD_SST25L) += sst25l.o ++obj-$(CONFIG_MTD_UBI32_M25P80) += ubi32-m25p80.o ++obj-$(CONFIG_MTD_NAND_SPI_ER) += nand-spi-er.o ++obj-$(CONFIG_MTD_UBI32_NAND_SPI_ER) += ubi32-nand-spi-er.o +--- a/drivers/net/Kconfig ++++ b/drivers/net/Kconfig +@@ -2608,6 +2608,19 @@ config S6GMAC + + source "drivers/net/stmmac/Kconfig" + ++config UBICOM32_GMAC ++ tristate "Ubicom Gigabit Ethernet support" ++ depends on UBICOM32 ++ help ++ Gigabit Ethernet support for ubicom32 processors ++ ++config UBICOM32_OCM_FOR_SKB ++ bool "USE OCM for SKB (EXPERIMENTAL)" ++ depends on UBICOM32_GMAC ++ default n ++ help ++ Allocate skb from OCM for Ethernet Receive when possible ++ + endif # NETDEV_1000 + + # +--- a/drivers/net/Makefile ++++ b/drivers/net/Makefile +@@ -286,3 +286,5 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o + obj-$(CONFIG_SFC) += sfc/ + + obj-$(CONFIG_WIMAX) += wimax/ ++ ++obj-$(CONFIG_UBICOM32_GMAC) += ubi32-eth.o +--- a/drivers/net/usb/asix.c ++++ b/drivers/net/usb/asix.c +@@ -319,14 +319,33 @@ static int asix_rx_fixup(struct usbnet * + /* get the packet length */ + size = (u16) (header & 0x0000ffff); + +- if ((skb->len) - ((size + 1) & 0xfffe) == 0) ++ if ((skb->len) - ((size + 1) & 0xfffe) == 0) { ++#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS ++ if (((u32)packet & 0x02) == 0) { ++ memmove(packet - 2, packet, size); ++ skb->data -= 2; ++ skb->tail -= 2; ++ } ++#endif + return 2; ++ } ++ + if (size > ETH_FRAME_LEN) { + deverr(dev,"asix_rx_fixup() Bad RX Length %d", size); + return 0; + } + ax_skb = skb_clone(skb, GFP_ATOMIC); + if (ax_skb) { ++#ifndef HAVE_EFFICIENT_UNALIGNED_ACCESS ++ if (((u32)packet & 0x02) == 0) { ++ memmove(packet - 2, packet, size); ++ ax_skb->data = packet - 2; ++ } else { ++ ax_skb->data = packet; ++ } ++#else ++ ax_skb->data = packet; ++#endif + ax_skb->len = size; + ax_skb->data = packet; + skb_set_tail_pointer(ax_skb, size); +@@ -1125,13 +1144,19 @@ static int ax88178_link_reset(struct usb + mode = AX88178_MEDIUM_DEFAULT; + + if (ecmd.speed == SPEED_1000) ++#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS + mode |= AX_MEDIUM_GM; ++#else ++ mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK; ++#endif + else if (ecmd.speed == SPEED_100) + mode |= AX_MEDIUM_PS; + else + mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM); + ++#ifdef HAVE_EFFICIENT_UNALIGNED_ACCESS + mode |= AX_MEDIUM_ENCK; ++#endif + + if (ecmd.duplex == DUPLEX_FULL) + mode |= AX_MEDIUM_FD; +--- a/drivers/oprofile/cpu_buffer.c ++++ b/drivers/oprofile/cpu_buffer.c +@@ -327,10 +327,10 @@ static inline void oprofile_end_trace(st + } + + static inline void +-__oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs, +- unsigned long event, int is_kernel) ++__oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs, ++ unsigned long event, int is_kernel, int cpu) + { +- struct oprofile_cpu_buffer *cpu_buf = &__get_cpu_var(cpu_buffer); ++ struct oprofile_cpu_buffer *cpu_buf = &per_cpu(cpu_buffer, cpu); + unsigned long backtrace = oprofile_backtrace_depth; + + /* +@@ -352,7 +352,8 @@ __oprofile_add_ext_sample(unsigned long + void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs, + unsigned long event, int is_kernel) + { +- __oprofile_add_ext_sample(pc, regs, event, is_kernel); ++ __oprofile_add_ext_sample_cpu(pc, regs, event, ++ is_kernel, smp_processor_id()); + } + + void oprofile_add_sample(struct pt_regs * const regs, unsigned long event) +@@ -360,7 +361,8 @@ void oprofile_add_sample(struct pt_regs + int is_kernel = !user_mode(regs); + unsigned long pc = profile_pc(regs); + +- __oprofile_add_ext_sample(pc, regs, event, is_kernel); ++ __oprofile_add_ext_sample_cpu(pc, regs, event, ++ is_kernel, smp_processor_id()); + } + + /* +--- a/drivers/pci/Makefile ++++ b/drivers/pci/Makefile +@@ -47,8 +47,8 @@ obj-$(CONFIG_PPC) += setup-bus.o + obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o + obj-$(CONFIG_X86_VISWS) += setup-irq.o + obj-$(CONFIG_MN10300) += setup-bus.o ++obj-$(CONFIG_UBICOM32) += setup-bus.o setup-irq.o + +-# + # ACPI Related PCI FW Functions + # + obj-$(CONFIG_ACPI) += pci-acpi.o +--- a/drivers/serial/Kconfig ++++ b/drivers/serial/Kconfig +@@ -879,6 +879,57 @@ config SERIAL_UARTLITE_CONSOLE + console (the system console is the device which receives all kernel + messages and warnings and which allows logins in single user mode). + ++config SERIAL_UBI32_UARTTIO ++ tristate "Ubicom UARTTIO support" ++ depends on UBICOM32=y ++ select SERIAL_CORE ++ default y ++ help ++ Add support for the Ubicom virtual peripherial serial interface. ++ ++config SERIAL_UBI32_UARTTIO_NR_UARTS ++ int "Maximum number of UARTTIO virtual serial ports" ++ depends on SERIAL_UBI32_UARTTIO ++ default "4" ++ help ++ Set this to the maximum number of serial ports you want the driver to support. ++ ++config SERIAL_UBI32_UARTTIO_CONSOLE ++ tristate "Ubicom UARTTIO console support" ++ depends on SERIAL_UBI32_UARTTIO=y ++ select SERIAL_CORE_CONSOLE ++ default y ++ help ++ Add support for console on the Ubicom virtual peripherial serial interface. ++ ++config SERIAL_UBI32_SERDES ++ bool "Ubicom serial port support" ++ depends on UBICOM32=y ++ select SERIAL_CORE ++ default y ++ help ++ Add support for the Ubicom serial interface. ++ ++config SERIAL_UBI32_SERDES_CONSOLE ++ bool "Ubicom serial console support" ++ depends on SERIAL_UBI32_SERDES=y ++ select SERIAL_CORE_CONSOLE ++ default y ++ ++config SERIAL_UBI32_MAILBOX ++ bool "Ubicom mailbox support" ++ depends on UBICOM32=y ++ select SERIAL_CORE ++ default n ++ help ++ Add support for the Ubicom mailbox interface. ++ ++config SERIAL_UBI32_MAILBOX_CONSOLE ++ bool "Ubicom mailbox console support" ++ depends on SERIAL_UBI32_MAILBOX=y ++ select SERIAL_CORE_CONSOLE ++ default y ++ + config SERIAL_SUNCORE + bool + depends on SPARC +--- a/drivers/serial/Makefile ++++ b/drivers/serial/Makefile +@@ -81,3 +81,6 @@ obj-$(CONFIG_SERIAL_KS8695) += serial_ks + obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o + obj-$(CONFIG_SERIAL_QE) += ucc_uart.o + obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o ++obj-$(CONFIG_SERIAL_UBI32_SERDES) += ubi32_serdes.o ++obj-$(CONFIG_SERIAL_UBI32_UARTTIO) += ubi32_uarttio.o ++obj-$(CONFIG_SERIAL_UBI32_MAILBOX) += ubi32_mailbox.o +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -214,6 +214,15 @@ config SPI_S3C24XX + help + SPI driver for Samsung S3C24XX series ARM SoCs + ++config SPI_UBICOM32_GPIO ++ tristate "Ubicom32 SPI over GPIO" ++ depends on SPI_MASTER && UBICOM32 && EXPERIMENTAL ++ select SPI_BITBANG ++ select HAS_DMA ++ help ++ SPI driver for the Ubicom32 architecture using ++ GPIO lines to provide the SPI bus. ++ + config SPI_S3C24XX_GPIO + tristate "Samsung S3C24XX series SPI by GPIO" + depends on ARCH_S3C2410 && EXPERIMENTAL +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52x + obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o + obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o + obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o ++obj-$(CONFIG_SPI_UBICOM32_GPIO) += spi_ubicom32_gpio.o + obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o + obj-$(CONFIG_SPI_TXX9) += spi_txx9.o + obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o +--- a/drivers/uio/Kconfig ++++ b/drivers/uio/Kconfig +@@ -94,4 +94,12 @@ config UIO_PCI_GENERIC + primarily, for virtualization scenarios. + If you compile this as a module, it will be called uio_pci_generic. + ++config UIO_UBICOM32RING ++ tristate "Ubicom32 Ring Buffer driver" ++ default n ++ help ++ Userspace I/O interface for a Ubicom32 Ring Buffer. ++ ++ If you compile this as a module, it will be called uio_ubicom32ring ++ + endif +--- a/drivers/uio/Makefile ++++ b/drivers/uio/Makefile +@@ -6,3 +6,4 @@ obj-$(CONFIG_UIO_SMX) += uio_smx.o + obj-$(CONFIG_UIO_AEC) += uio_aec.o + obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o + obj-$(CONFIG_UIO_PCI_GENERIC) += uio_pci_generic.o ++obj-$(CONFIG_UIO_UBICOM32RING) += uio_ubicom32ring.o +--- a/drivers/usb/gadget/epautoconf.c ++++ b/drivers/usb/gadget/epautoconf.c +@@ -154,6 +154,10 @@ ep_matches ( + /* configure your hardware with enough buffering!! */ + } + break; ++ ++ case USB_ENDPOINT_XFER_BULK: ++ if ((gadget->is_dualspeed) && (ep->maxpacket < 512)) ++ return 0; + } + + /* MATCH!! */ +--- a/drivers/usb/Kconfig ++++ b/drivers/usb/Kconfig +@@ -22,6 +22,7 @@ config USB_ARCH_HAS_HCD + default y if PCMCIA && !M32R # sl811_cs + default y if ARM # SL-811 + default y if SUPERH # r8a66597-hcd ++ default y if UBICOM32 # Ubicom's onchip USB Duial role controller + default PCI + + # many non-PCI SOC chips embed OHCI +--- a/drivers/usb/musb/Kconfig ++++ b/drivers/usb/musb/Kconfig +@@ -14,7 +14,7 @@ config USB_MUSB_HDRC + select TWL4030_USB if MACH_OMAP_3430SDP + select NOP_USB_XCEIV if MACH_OMAP3EVM + select USB_OTG_UTILS +- tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' ++ tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, Ubicom, ...)' + help + Say Y here if your system has a dual role high speed USB + controller based on the Mentor Graphics silicon IP. Then +--- a/drivers/usb/musb/Makefile ++++ b/drivers/usb/musb/Makefile +@@ -30,6 +30,10 @@ ifeq ($(CONFIG_BF52x),y) + musb_hdrc-objs += blackfin.o + endif + ++ifeq ($(CONFIG_UBICOM32), y) ++ musb_hdrc-objs += ubi32_usb.o ++endif ++ + ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y) + musb_hdrc-objs += musb_gadget_ep0.o musb_gadget.o + endif +--- a/drivers/usb/musb/musb_core.c ++++ b/drivers/usb/musb/musb_core.c +@@ -105,6 +105,13 @@ + #include + #endif + ++#ifdef CONFIG_UBICOM32 ++#include ++#include ++extern void ubi32_usb_init(void); ++extern void ubi32_usb_int_clr(void); ++#endif ++ + #include "musb_core.h" + + +@@ -148,8 +155,37 @@ static inline struct musb *dev_to_musb(s + } + + /*-------------------------------------------------------------------------*/ ++#if defined(CONFIG_UBICOM32) ++ ++/* ++ * Load an endpoint's FIFO ++ */ ++void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 wCount, const u8 *pSource) ++{ ++ void __iomem *fifo = hw_ep->fifo; ++ ++ prefetch((u8 *)pSource); ++ ++ DBG(4, "%cX ep%d fifo %p count %d buf %p\n", ++ 'T', hw_ep->epnum, fifo, wCount, pSource); ++ ++ usb_tio_write_fifo((u32)fifo, (u32)pSource, wCount); ++ ++} ++ ++/* ++ * Unload an endpoint's FIFO ++ */ ++void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 wCount, u8 *pDest) ++{ ++ ++ void __iomem *fifo = hw_ep->fifo; ++ DBG(4, "%cX ep%d fifo %p count %d buf %p\n", ++ 'R', hw_ep->epnum, fifo, wCount, pDest); ++ usb_tio_read_fifo((u32)fifo, (u32)pDest, wCount); ++} + +-#if !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN) ++#elif !defined(CONFIG_USB_TUSB6010) && !defined(CONFIG_BLACKFIN) + + /* + * Load an endpoint's FIFO +@@ -228,8 +264,7 @@ void musb_read_fifo(struct musb_hw_ep *h + readsb(fifo, dst, len); + } + } +- +-#endif /* normal PIO */ ++#endif /* !T6010 && !BLACKFIN */ + + + /*-------------------------------------------------------------------------*/ +@@ -890,12 +925,19 @@ void musb_start(struct musb *musb) + musb_writeb(regs, MUSB_TESTMODE, 0); + + /* put into basic highspeed mode and start session */ ++#ifndef CONFIG_UBICOM32 + musb_writeb(regs, MUSB_POWER, MUSB_POWER_ISOUPDATE + | MUSB_POWER_SOFTCONN + | MUSB_POWER_HSENAB + /* ENSUSPEND wedges tusb */ + /* | MUSB_POWER_ENSUSPEND */ + ); ++#else ++ musb_writeb(regs, MUSB_POWER, MUSB_POWER_HSENAB ++ /* ENSUSPEND wedges tusb */ ++ /* | MUSB_POWER_ENSUSPEND */ ++ ); ++#endif + + musb->is_active = 0; + devctl = musb_readb(regs, MUSB_DEVCTL); +@@ -1096,6 +1138,7 @@ static struct fifo_cfg __initdata mode_4 + }; + + ++#ifndef CONFIG_UBICOM32 + /* + * configure a fifo; for non-shared endpoints, this may be called + * once for a tx fifo and once for an rx fifo. +@@ -1255,7 +1298,7 @@ static int __init ep_config_from_table(s + + return 0; + } +- ++#endif /* CONFIG_UBICOM32 */ + + /* + * ep_config_from_hw - when MUSB_C_DYNFIFO_DEF is false +@@ -1271,6 +1314,11 @@ static int __init ep_config_from_hw(stru + DBG(2, "<== static silicon ep config\n"); + + /* FIXME pick up ep0 maxpacket size */ ++#ifdef CONFIG_UBICOM32 ++ /* set ep0 to shared_fifo, otherwise urb will be put to out_qh but ep0_irq try to get the urb from in_qh*/ ++ hw_ep = musb->endpoints; ++ hw_ep->is_shared_fifo = true; ++#endif + + for (epnum = 1; epnum < musb->config->num_eps; epnum++) { + musb_ep_select(mbase, epnum); +@@ -1291,14 +1339,27 @@ static int __init ep_config_from_hw(stru + /* REVISIT: this algorithm is lazy, we should at least + * try to pick a double buffered endpoint. + */ ++#ifndef CONFIG_UBICOM32 + if (musb->bulk_ep) + continue; + musb->bulk_ep = hw_ep; ++#else ++ if ((musb->bulk_ep_in) && (musb->bulk_ep_out)) ++ continue; ++ /* Save theEP with 1024 Bytes FIFO for ISO */ ++ if(hw_ep->max_packet_sz_tx == 512) { ++ if (!musb->bulk_ep_in) { ++ musb->bulk_ep_in = hw_ep; ++ } else if (!musb->bulk_ep_out) { ++ musb->bulk_ep_out = hw_ep; ++ } ++ } ++#endif /* CONFIG_UBICOM32 */ + #endif + } + + #ifdef CONFIG_USB_MUSB_HDRC_HCD +- if (!musb->bulk_ep) { ++ if ((!musb->bulk_ep_in) || (!musb->bulk_ep_out)) { + pr_debug("%s: missing bulk\n", musb_driver_name); + return -EINVAL; + } +@@ -1407,12 +1468,16 @@ static int __init musb_core_init(u16 mus + musb->epmask = 1; + + if (reg & MUSB_CONFIGDATA_DYNFIFO) { ++#ifndef CONFIG_UBICOM32 + if (musb->config->dyn_fifo) + status = ep_config_from_table(musb); +- else { ++ else ++#endif ++ { + ERR("reconfigure software for Dynamic FIFOs\n"); + status = -ENODEV; + } ++ + } else { + if (!musb->config->dyn_fifo) + status = ep_config_from_hw(musb); +@@ -1476,8 +1541,8 @@ static int __init musb_core_init(u16 mus + + /*-------------------------------------------------------------------------*/ + +-#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) +- ++#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3430) || defined(CONFIG_UBICOM32) ++static u32_t musb_int_count = 0; + static irqreturn_t generic_interrupt(int irq, void *__hci) + { + unsigned long flags; +@@ -1486,10 +1551,17 @@ static irqreturn_t generic_interrupt(int + + spin_lock_irqsave(&musb->lock, flags); + ++#ifndef CONFIG_UBICOM32 + musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); + musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); + musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); ++#else ++ musb_read_int_status(&musb->int_usb, &musb->int_tx, &musb->int_rx); ++ //ubi32_usb_int_clr(); ++ musb_int_count++; ++#endif + ++ DBG(4, "usb %x, tx %x, rx %x", musb->int_usb, musb->int_tx, musb->int_rx); + if (musb->int_usb || musb->int_tx || musb->int_rx) + retval = musb_interrupt(musb); + +@@ -2241,6 +2313,10 @@ static struct platform_driver musb_drive + + static int __init musb_init(void) + { ++#ifdef CONFIG_UBICOM32 ++ ubi32_usb_init(); ++#endif ++ + #ifdef CONFIG_USB_MUSB_HDRC_HCD + if (usb_disabled()) + return 0; +--- a/drivers/usb/musb/musb_core.h ++++ b/drivers/usb/musb/musb_core.h +@@ -339,7 +339,12 @@ struct musb { + * queue until it completes or NAKs too much; then we try the next + * endpoint. + */ ++#ifdef CONFIG_UBICOM32 ++ struct musb_hw_ep *bulk_ep_in; ++ struct musb_hw_ep *bulk_ep_out; ++#else + struct musb_hw_ep *bulk_ep; ++#endif + + struct list_head control; /* of musb_qh */ + struct list_head in_bulk; /* of musb_qh */ +--- a/drivers/usb/musb/musb_gadget.c ++++ b/drivers/usb/musb/musb_gadget.c +@@ -434,7 +434,7 @@ void musb_g_tx(struct musb *musb, u8 epn + * probably rates reporting as a host error + */ + if (csr & MUSB_TXCSR_P_SENTSTALL) { +- csr |= MUSB_TXCSR_P_WZC_BITS; ++ csr &= ~(MUSB_TXCSR_P_WZC_BITS); + csr &= ~MUSB_TXCSR_P_SENTSTALL; + musb_writew(epio, MUSB_TXCSR, csr); + break; +@@ -442,7 +442,7 @@ void musb_g_tx(struct musb *musb, u8 epn + + if (csr & MUSB_TXCSR_P_UNDERRUN) { + /* we NAKed, no big deal ... little reason to care */ +- csr |= MUSB_TXCSR_P_WZC_BITS; ++ csr &= ~(MUSB_TXCSR_P_WZC_BITS); + csr &= ~(MUSB_TXCSR_P_UNDERRUN + | MUSB_TXCSR_TXPKTRDY); + musb_writew(epio, MUSB_TXCSR, csr); +@@ -577,12 +577,18 @@ static void rxstate(struct musb *musb, s + { + const u8 epnum = req->epnum; + struct usb_request *request = &req->request; +- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out; ++ struct musb_ep *musb_ep = NULL; + void __iomem *epio = musb->endpoints[epnum].regs; +- unsigned fifo_count = 0; +- u16 len = musb_ep->packet_sz; ++ u16 fifo_count = 0; ++ u16 len = 0; + u16 csr = musb_readw(epio, MUSB_RXCSR); + ++ if (musb->endpoints[epnum].is_shared_fifo) ++ musb_ep = &musb->endpoints[epnum].ep_in; ++ else ++ musb_ep = &musb->endpoints[epnum].ep_out; ++ len = musb_ep->packet_sz; ++ + /* We shouldn't get here while DMA is active, but we do... */ + if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) { + DBG(4, "DMA pending...\n"); +@@ -730,7 +736,7 @@ static void rxstate(struct musb *musb, s + */ + + /* ack the read! */ +- csr |= MUSB_RXCSR_P_WZC_BITS; ++ csr &= ~MUSB_RXCSR_P_WZC_BITS; + csr &= ~MUSB_RXCSR_RXPKTRDY; + musb_writew(epio, MUSB_RXCSR, csr); + } +@@ -749,10 +755,15 @@ void musb_g_rx(struct musb *musb, u8 epn + u16 csr; + struct usb_request *request; + void __iomem *mbase = musb->mregs; +- struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out; ++ struct musb_ep *musb_ep = NULL; + void __iomem *epio = musb->endpoints[epnum].regs; + struct dma_channel *dma; + ++ if (musb->endpoints[epnum].is_shared_fifo) ++ musb_ep = &musb->endpoints[epnum].ep_in; ++ else ++ musb_ep = &musb->endpoints[epnum].ep_out; ++ + musb_ep_select(mbase, epnum); + + request = next_request(musb_ep); +@@ -1756,7 +1767,9 @@ int usb_gadget_register_driver(struct us + } + } + } +- ++#ifndef CONFIG_USB_MUSB_OTG ++ musb_pullup(musb, 1); ++#endif + return retval; + } + EXPORT_SYMBOL(usb_gadget_register_driver); +--- a/drivers/usb/musb/musb_gadget_ep0.c ++++ b/drivers/usb/musb/musb_gadget_ep0.c +@@ -241,14 +241,14 @@ __acquires(musb->lock) + case USB_REQ_SET_ADDRESS: + /* change it after the status stage */ + musb->set_address = true; +- musb->address = (u8) (ctrlrequest->wValue & 0x7f); ++ musb->address = (u8) (le16_to_cpu(ctrlrequest->wValue) & 0x7f); + handled = 1; + break; + + case USB_REQ_CLEAR_FEATURE: + switch (recip) { + case USB_RECIP_DEVICE: +- if (ctrlrequest->wValue ++ if (le16_to_cpu(ctrlrequest->wValue) + != USB_DEVICE_REMOTE_WAKEUP) + break; + musb->may_wakeup = 0; +@@ -262,8 +262,8 @@ __acquires(musb->lock) + + if (num == 0 + || num >= MUSB_C_NUM_EPS +- || ctrlrequest->wValue +- != USB_ENDPOINT_HALT) ++ || le16_to_cpu(ctrlrequest->wValue ++ != USB_ENDPOINT_HALT)) + break; + + if (ctrlrequest->wIndex & USB_DIR_IN) +@@ -293,7 +293,7 @@ __acquires(musb->lock) + switch (recip) { + case USB_RECIP_DEVICE: + handled = 1; +- switch (ctrlrequest->wValue) { ++ switch (le16_to_cpu(ctrlrequest->wValue)) { + case USB_DEVICE_REMOTE_WAKEUP: + musb->may_wakeup = 1; + break; +@@ -375,8 +375,8 @@ stall: + + if (epnum == 0 + || epnum >= MUSB_C_NUM_EPS +- || ctrlrequest->wValue +- != USB_ENDPOINT_HALT) ++ || le16_to_cpu(ctrlrequest->wValue ++ != USB_ENDPOINT_HALT)) + break; + + ep = musb->endpoints + epnum; +--- a/drivers/usb/musb/musb_host.c ++++ b/drivers/usb/musb/musb_host.c +@@ -160,7 +160,11 @@ static inline void musb_h_tx_start(struc + /* NOTE: no locks here; caller should lock and select EP */ + if (ep->epnum) { + txcsr = musb_readw(ep->regs, MUSB_TXCSR); ++#ifndef CONFIG_UBICOM32 + txcsr |= MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_H_WZC_BITS; ++#else ++ txcsr |= (MUSB_TXCSR_TXPKTRDY & (~MUSB_TXCSR_H_WZC_BITS)); ++#endif + musb_writew(ep->regs, MUSB_TXCSR, txcsr); + } else { + txcsr = MUSB_CSR0_H_SETUPPKT | MUSB_CSR0_TXPKTRDY; +@@ -235,6 +239,8 @@ musb_start_urb(struct musb *musb, int is + break; + default: /* bulk, interrupt */ + /* actual_length may be nonzero on retry paths */ ++ if (urb->actual_length) ++ DBG(3 ,"musb_start_urb: URB %p retried, len: %d\n", urb, urb->actual_length); + buf = urb->transfer_buffer + urb->actual_length; + len = urb->transfer_buffer_length - urb->actual_length; + } +@@ -532,7 +538,11 @@ musb_host_packet_rx(struct musb *musb, s + musb_read_fifo(hw_ep, length, buf); + + csr = musb_readw(epio, MUSB_RXCSR); ++#ifndef CONFIG_UBICOM32 + csr |= MUSB_RXCSR_H_WZC_BITS; ++#else ++ csr &= ~MUSB_RXCSR_H_WZC_BITS; ++#endif + if (unlikely(do_flush)) + musb_h_flush_rxfifo(hw_ep, csr); + else { +@@ -566,6 +576,7 @@ musb_rx_reinit(struct musb *musb, struct + + /* if programmed for Tx, put it in RX mode */ + if (ep->is_shared_fifo) { ++#ifndef CONFIG_UBICOM32 + csr = musb_readw(ep->regs, MUSB_TXCSR); + if (csr & MUSB_TXCSR_MODE) { + musb_h_tx_flush_fifo(ep); +@@ -580,7 +591,18 @@ musb_rx_reinit(struct musb *musb, struct + */ + if (csr & MUSB_TXCSR_DMAMODE) + musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE); ++ ++#else ++ /* clear mode (and everything else) to enable Rx */ + musb_writew(ep->regs, MUSB_TXCSR, 0); ++ /* scrub all previous state, clearing toggle */ ++ csr = musb_readw(ep->regs, MUSB_RXCSR); ++ if (csr & MUSB_RXCSR_RXPKTRDY) ++ WARNING("rx%d, packet/%d ready?\n", ep->epnum, ++ musb_readw(ep->regs, MUSB_RXCOUNT)); ++ ++ musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG); ++#endif + + /* scrub all previous state, clearing toggle */ + } else { +@@ -1108,6 +1130,16 @@ void musb_host_tx(struct musb *musb, u8 + void __iomem *mbase = musb->mregs; + struct dma_channel *dma; + ++#ifdef CONFIG_UBICOM32 ++ if (hw_ep->is_shared_fifo) { ++ qh = hw_ep->in_qh; ++ } ++#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS ++ printk(KERN_DEBUG "OUT/TX%d end, csr %04x%s\n", epnum, tx_csr, ++ dma ? ", dma" : ""); ++#endif ++#endif ++ + musb_ep_select(mbase, epnum); + tx_csr = musb_readw(epio, MUSB_TXCSR); + +@@ -1148,9 +1180,14 @@ void musb_host_tx(struct musb *musb, u8 + * we have a candidate... NAKing is *NOT* an error + */ + musb_ep_select(mbase, epnum); ++#ifndef CONFIG_UBICOM32 + musb_writew(epio, MUSB_TXCSR, + MUSB_TXCSR_H_WZC_BITS + | MUSB_TXCSR_TXPKTRDY); ++#else ++ musb_writew(epio, MUSB_TXCSR, ++ MUSB_TXCSR_TXPKTRDY); ++#endif + return; + } + +@@ -1324,8 +1361,14 @@ void musb_host_tx(struct musb *musb, u8 + qh->segsize = length; + + musb_ep_select(mbase, epnum); ++#ifndef CONFIG_UBICOM32 ++ musb_writew(epio, MUSB_TXCSR, ++ MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); ++#else + musb_writew(epio, MUSB_TXCSR, +- MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY); ++ MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY); ++#endif ++ + } + + +@@ -1385,7 +1428,11 @@ static void musb_bulk_rx_nak_timeout(str + + /* clear nak timeout bit */ + rx_csr = musb_readw(epio, MUSB_RXCSR); ++#ifndef CONFIG_UBICOM32 + rx_csr |= MUSB_RXCSR_H_WZC_BITS; ++#else ++ rx_csr &= ~MUSB_RXCSR_H_WZC_BITS; ++#endif + rx_csr &= ~MUSB_RXCSR_DATAERROR; + musb_writew(epio, MUSB_RXCSR, rx_csr); + +@@ -1454,6 +1501,13 @@ void musb_host_rx(struct musb *musb, u8 + + pipe = urb->pipe; + ++#ifdef CONFIG_UBICOM32 ++#ifdef CONFIG_USB_SERIAL_SIERRAWIRELESS ++ printk(KERN_DEBUG "RXCSR%d %04x, reqpkt, len %zu%s\n", epnum, rx_csr, ++ xfer_len, dma ? ", dma" : ""); ++#endif ++#endif ++ + DBG(5, "<== hw %d rxcsr %04x, urb actual %d (+dma %zu)\n", + epnum, rx_csr, urb->actual_length, + dma ? dma->actual_len : 0); +@@ -1492,8 +1546,15 @@ void musb_host_rx(struct musb *musb, u8 + return; + } + musb_ep_select(mbase, epnum); ++#ifndef CONFIG_UBICOM32 + rx_csr |= MUSB_RXCSR_H_WZC_BITS; + rx_csr &= ~MUSB_RXCSR_DATAERROR; ++#else ++ /* NEED TO EVALUATE CHANGE */ ++ rx_csr &= ~MUSB_RXCSR_H_WZC_BITS; ++ rx_csr &= ~MUSB_RXCSR_DATAERROR; ++// musb_writew(epio, MUSB_RXCSR, (~(MUSB_RXCSR_H_WZC_BITS))| MUSB_RXCSR_H_REQPKT); ++#endif + musb_writew(epio, MUSB_RXCSR, rx_csr); + + goto finish; +@@ -1554,8 +1615,13 @@ void musb_host_rx(struct musb *musb, u8 + rx_csr &= ~MUSB_RXCSR_H_REQPKT; + + musb_ep_select(mbase, epnum); ++#ifndef CONFIG_UBICOM32 + musb_writew(epio, MUSB_RXCSR, + MUSB_RXCSR_H_WZC_BITS | rx_csr); ++#else ++ musb_writew(epio, MUSB_RXCSR, ++ (~MUSB_RXCSR_H_WZC_BITS) & rx_csr); ++#endif + } + #endif + if (dma && (rx_csr & MUSB_RXCSR_DMAENAB)) { +@@ -1585,7 +1651,7 @@ void musb_host_rx(struct musb *musb, u8 + else + done = false; + +- } else { ++ } else { + /* done if urb buffer is full or short packet is recd */ + done = (urb->actual_length + xfer_len >= + urb->transfer_buffer_length +@@ -1799,7 +1865,11 @@ static int musb_schedule( + if (musb_ep_get_qh(hw_ep, is_in) != NULL) + continue; + ++#ifndef CONFIG_UBICOM32 + if (hw_ep == musb->bulk_ep) ++#else ++ if ((hw_ep == musb->bulk_ep_in) || (hw_ep == musb->bulk_ep_out)) /* Ubicom */ ++#endif + continue; + + if (is_in) +@@ -1813,7 +1883,14 @@ static int musb_schedule( + best_end = epnum; + } + } ++ ++#ifdef CONFIG_UBICOM32 ++ if (((best_diff >= qh->maxpacket)) && ((qh->type == USB_ENDPOINT_XFER_BULK) && (!is_in))) ++ best_end = -1; ++#endif ++ + /* use bulk reserved ep1 if no other ep is free */ ++#ifndef CONFIG_UBICOM32 + if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) { + hw_ep = musb->bulk_ep; + if (is_in) +@@ -1835,6 +1912,22 @@ static int musb_schedule( + } else if (best_end < 0) { + return -ENOSPC; + } ++#else ++ if (best_end < 0 && qh->type == USB_ENDPOINT_XFER_BULK) { ++ /* hw_ep = musb->bulk_ep; */ ++ if (is_in) { ++ head = &musb->in_bulk; ++ hw_ep = musb->bulk_ep_in; /* UBICOM */ ++ } ++ else { ++ head = &musb->out_bulk; ++ hw_ep = musb->bulk_ep_out; /* UBICOM */ ++ } ++ goto success; ++ } else if (best_end < 0) { ++ return -ENOSPC; ++ } ++#endif + + idle = 1; + qh->mux = 0; +@@ -1846,6 +1939,13 @@ success: + list_add_tail(&qh->ring, head); + qh->mux = 1; + } ++ /* ++ * It's not make sense to set NAK timeout when qh->mux = 0, ++ * There is nothing else to schedule ++ */ ++ if ((qh->type == USB_ENDPOINT_XFER_BULK) && (qh->mux == 0)) ++ qh->intv_reg = 0; ++ + qh->hw_ep = hw_ep; + qh->hep->hcpriv = qh; + if (idle) +@@ -1964,6 +2064,15 @@ static int musb_urb_enqueue( + /* ISO always uses logarithmic encoding */ + interval = min_t(u8, epd->bInterval, 16); + break; ++#ifdef COMFIG_UBICOM32 ++ case USB_ENDPOINT_XFER_BULK: ++ if (epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ++ interval = (USB_SPEED_HIGH == urb->dev->speed) ? 16: 2; ++ else ++ interval = 0; ++ break; ++#endif ++ + default: + /* REVISIT we actually want to use NAK limits, hinting to the + * transfer scheduling logic to try some other qh, e.g. try +--- a/drivers/usb/musb/musb_io.h ++++ b/drivers/usb/musb/musb_io.h +@@ -58,6 +58,7 @@ static inline void writesb(const void __ + + #ifndef CONFIG_BLACKFIN + ++#ifndef CONFIG_UBICOM32 + /* NOTE: these offsets are all in bytes */ + + static inline u16 musb_readw(const void __iomem *addr, unsigned offset) +@@ -72,7 +73,37 @@ static inline void musb_writew(void __io + + static inline void musb_writel(void __iomem *addr, unsigned offset, u32 data) + { __raw_writel(data, addr + offset); } ++#else ++#include ++static inline u16 musb_readw(const void __iomem *addr, unsigned offset) ++{ ++ u16 data; ++ usb_tio_read_u16((u32)(addr + offset), &data); ++ return data; ++} + ++static inline u8 musb_readb(const void __iomem *addr, unsigned offset) ++{ ++ u8 data; ++ usb_tio_read_u8((u32)(addr + offset), &data); ++ return data; ++} ++ ++static inline void musb_writew(void __iomem *addr, unsigned offset, u16 data) ++{ ++ usb_tio_write_u16((u32)(addr + offset), data); ++} ++ ++static inline void musb_writeb(void __iomem *addr, unsigned offset, u8 data) ++{ ++ usb_tio_write_u8((u32)(addr + offset), data); ++} ++ ++static inline void musb_read_int_status(u8_t *int_usb, u16_t *int_tx, u16_t *int_rx) ++{ ++ return usb_tio_read_int_status(int_usb, int_tx, int_rx); ++} ++#endif /* CONFIG_UBICOM32 */ + + #ifdef CONFIG_USB_TUSB6010 + +@@ -106,7 +137,7 @@ static inline void musb_writeb(void __io + __raw_writew(tmp, addr + (offset & ~1)); + } + +-#else ++#elif !defined(CONFIG_UBICOM32) + + static inline u8 musb_readb(const void __iomem *addr, unsigned offset) + { return __raw_readb(addr + offset); } +--- a/drivers/usb/musb/musb_regs.h ++++ b/drivers/usb/musb/musb_regs.h +@@ -167,6 +167,7 @@ + (MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \ + | MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY) + ++ + /* RXCSR in Peripheral and Host mode */ + #define MUSB_RXCSR_AUTOCLEAR 0x8000 + #define MUSB_RXCSR_DMAENAB 0x2000 +--- a/drivers/video/backlight/Kconfig ++++ b/drivers/video/backlight/Kconfig +@@ -100,6 +100,63 @@ config LCD_HP700 + If you have an HP Jornada 700 series handheld (710/720/728) + say Y to enable LCD control driver. + ++config LCD_UBICOM32POWER ++ tristate "Ubicom LCD power Driver" ++ depends on LCD_CLASS_DEVICE && UBICOM32 ++ default n ++ help ++ If you have a Ubicom32 based system with an LCD panel that requires ++ power control, say Y to enable the power control driver for it. ++ ++config LCD_UBICOM32 ++ tristate "Ubicom Backlight Driver" ++ depends on LCD_CLASS_DEVICE && UBICOM32 ++ default n ++ help ++ This driver takes care of initialization of LCD panels with ++ built in controllers. ++ ++menu "Ubicom32 LCD Panel Support" ++ depends on UBICOM32 && LCD_UBICOM32 ++ ++config LCD_UBICOM32_TFT2N0369E_P ++ bool "TFT2N0369E (Portrait)" ++ default n ++ help ++ Support for TFT2N0369 in portrait mode ++ ++config LCD_UBICOM32_TFT2N0369E_L ++ bool "TFT2N0369E (Landscape)" ++ default n ++ help ++ Support for TFT2N0369 in landscape mode ++ ++config LCD_UBICOM32_CFAF240320KTTS ++ bool "CFAF240320KTTS" ++ default n ++ help ++ Support for CFAF240320KTTS ++ ++config LCD_UBICOM32_CFAF240320KTTS_180 ++ bool "CFAF240320KTTS (180 rotation)" ++ default n ++ help ++ Support for CFAF240320KTTS rotated 180 degrees ++ ++config LCD_UBICOM32_CFAF240320D ++ bool "CFAF240320D" ++ default n ++ help ++ Support for CFAF240320D ++ ++config LCD_UBICOM32_CFAF320240F ++ bool "CFAF320240F" ++ default n ++ help ++ Support for CFAF320240F ++ ++endmenu ++ + # + # Backlight + # +@@ -262,3 +319,11 @@ config BACKLIGHT_ADP5520 + To compile this driver as a module, choose M here: the module will + be called adp5520_bl. + ++config BACKLIGHT_UBICOM32 ++ tristate "Ubicom Backlight Driver" ++ depends on BACKLIGHT_CLASS_DEVICE && UBICOM32 ++ default n ++ help ++ If you have a Ubicom32 based system with a backlight say Y to enable the ++ backlight driver. ++ +--- a/drivers/video/backlight/Makefile ++++ b/drivers/video/backlight/Makefile +@@ -10,6 +10,9 @@ obj-$(CONFIG_LCD_PLATFORM) += platfor + obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o + obj-$(CONFIG_LCD_TDO24M) += tdo24m.o + obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o ++obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o ++obj-$(CONFIG_LCD_UBICOM32POWER) += ubicom32lcdpower.o ++obj-$(CONFIG_LCD_UBICOM32) += ubicom32lcd.o + + obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o + obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o +@@ -28,4 +31,4 @@ obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886 + obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o + obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o + obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o +- ++obj-$(CONFIG_BACKLIGHT_UBICOM32) += ubicom32bl.o +--- a/drivers/video/Kconfig ++++ b/drivers/video/Kconfig +@@ -611,6 +611,50 @@ config FB_BFIN_T350MCQB + This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI + It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK. + ++config FB_UBICOM32 ++ tristate "Ubicom32 Frame Buffer driver" ++ depends on FB && UBICOM32 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select FONT_6x11 if FRAMEBUFFER_CONSOLE ++ help ++ This is the framebuffer device driver for the Ubicom32 architecture. ++ You can configure video memory by using kernel command line parameters, for example: ++ video=ubicomfb:vram_size=512,init_value=0xffff ++ ++config FB_UBICOM32_PLIO80 ++ tristate "Ubicom32 80 Bus PLIO Frame Buffer driver" ++ depends on FB && UBICOM32 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select FONT_6x11 if FRAMEBUFFER_CONSOLE ++ select UBICOM32_PLIO ++ help ++ This is a framebuffer device driver for the Ubicom32 architecture. ++ You can configure the xres, yres and vram size (in kilobytes) by using ++ kernel command line parameters, for example: ++ video=ubicom32vfb:xres=320,yres=240,vram_size=512 ++ ++config FB_UBICOM32_VIRTUAL ++ tristate "Ubicom32 Virtual Frame Buffer driver" ++ depends on FB && UBICOM32 ++ select FB_CFB_FILLRECT ++ select FB_CFB_COPYAREA ++ select FB_CFB_IMAGEBLIT ++ select FONT_6x11 if FRAMEBUFFER_CONSOLE ++ help ++ This is a virtual framebuffer device driver for the Ubicom32 architecture. ++ You can configure the xres, yres and vram size (in kilobytes) by using ++ kernel command line parameters, for example: ++ video=ubicom32vfb:xres=320,yres=240,vram_size=512 ++ ++config FB_UBICOM32_VIRTUAL_NOAUTO ++ bool "Do not automatically load" ++ depends on FB_UBICOM32_VIRTUAL ++ help ++ Select this option to prevent the VFB from automatically loading at boot. + + config FB_STI + tristate "HP STI frame buffer device support" +--- a/drivers/video/Makefile ++++ b/drivers/video/Makefile +@@ -140,6 +140,10 @@ obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin + obj-$(CONFIG_FB_MX3) += mx3fb.o + obj-$(CONFIG_FB_DA8XX) += da8xx-fb.o + ++obj-$(CONFIG_FB_UBICOM32) += ubicom32fb.o ++obj-$(CONFIG_FB_UBICOM32_PLIO80) += ubicom32plio80.o ++obj-$(CONFIG_FB_UBICOM32_VIRTUAL) += ubicom32vfb.o ++ + # the test framebuffer is last + obj-$(CONFIG_FB_VIRTUAL) += vfb.o + +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -973,6 +973,19 @@ config WATCHDOG_RIO + machines. The watchdog timeout period is normally one minute but + can be changed with a boot-time parameter. + ++# Ubicom32 ++ ++config UBI32_WDT ++ tristate "Ubicom32 Hardware Watchdog support" ++ depends on UBICOM32 ++ ---help--- ++ If you say yes here you will get support for the Ubicom32 On-Chip ++ Watchdog Timer. If you have one of these processors and wish to ++ have watchdog support enabled, say Y, otherwise say N. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called ubi32_wdt. ++ + # XTENSA Architecture + + # +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -139,6 +139,9 @@ obj-$(CONFIG_SH_WDT) += shwdt.o + obj-$(CONFIG_WATCHDOG_RIO) += riowd.o + obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o + ++# Ubicom32 Architecture ++obj-$(CONFIG_UBI32_WDT) += ubi32_wdt.o ++ + # XTENSA Architecture + + # Architecture Independant +--- a/fs/binfmt_flat.c ++++ b/fs/binfmt_flat.c +@@ -67,6 +67,11 @@ + #define FLAT_DATA_ALIGN (sizeof(void *)) + #endif + ++#ifndef ARCH_FLAT_ALIGN ++#undef FLAT_DATA_ALIGN ++#define FLAT_DATA_ALIGN ARCH_FLAT_ALIGN ++#endif ++ + #define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */ + #define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */ + +@@ -434,6 +439,7 @@ static int load_flat_file(struct linux_b + loff_t fpos; + unsigned long start_code, end_code; + int ret; ++ int flush_happened = 0; + + hdr = ((struct flat_hdr *) bprm->buf); /* exec-header */ + inode = bprm->file->f_path.dentry->d_inode; +@@ -520,6 +526,7 @@ static int load_flat_file(struct linux_b + /* OK, This is the point of no return */ + set_personality(PER_LINUX_32BIT); + setup_new_exec(bprm); ++ flush_happened = 1; + } + + /* +@@ -534,6 +541,12 @@ static int load_flat_file(struct linux_b + * it all together. + */ + if ((flags & (FLAT_FLAG_RAM|FLAT_FLAG_GZIP)) == 0) { ++ ++#ifdef ARCH_FLAT_ALIGN_TEXT ++ printk("Unable to mmap rom with ARCH alignment requirements\n"); ++ ret = -ENOEXEC; ++ goto err; ++#endif + /* + * this should give us a ROM ptr, but if it doesn't we don't + * really care +@@ -552,7 +565,7 @@ static int load_flat_file(struct linux_b + goto err; + } + +- len = data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long); ++ len = data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), FLAT_DATA_ALIGN); + len = PAGE_ALIGN(len); + down_write(¤t->mm->mmap_sem); + realdatastart = do_mmap(0, 0, len, +@@ -571,6 +584,7 @@ static int load_flat_file(struct linux_b + datapos = ALIGN(realdatastart + + MAX_SHARED_LIBS * sizeof(unsigned long), + FLAT_DATA_ALIGN); ++ //datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN); + + DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n", + (int)(data_len + bss_len + stack_len), (int)datapos); +@@ -599,7 +613,11 @@ static int load_flat_file(struct linux_b + memp_size = len; + } else { + +- len = text_len + data_len + extra + MAX_SHARED_LIBS * sizeof(unsigned long); ++ len = text_len + data_len + extra + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), FLAT_DATA_ALIGN); ++#ifdef ARCH_FLAT_ALIGN_TEXT ++ /* Reserve space for the text alignment. */ ++ len += FLAT_DATA_ALIGN; ++#endif + len = PAGE_ALIGN(len); + down_write(¤t->mm->mmap_sem); + textpos = do_mmap(0, 0, len, +@@ -615,10 +633,17 @@ static int load_flat_file(struct linux_b + goto err; + } + ++ memp = textpos; ++#ifdef ARCH_FLAT_ALIGN_TEXT ++ textpos = ALIGN(textpos + sizeof(struct flat_hdr), FLAT_DATA_ALIGN) - sizeof(struct flat_hdr); ++#endif + realdatastart = textpos + ntohl(hdr->data_start); + datapos = ALIGN(realdatastart + + MAX_SHARED_LIBS * sizeof(unsigned long), + FLAT_DATA_ALIGN); ++// datapos = realdatastart + ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN); ++// reloc = (unsigned long *) (textpos + ntohl(hdr->reloc_start) + ++// ALIGN(MAX_SHARED_LIBS * sizeof(unsigned long), ARCH_FLAT_ALIGN)); + + reloc = (unsigned long *) + (datapos + (ntohl(hdr->reloc_start) - text_len)); +@@ -658,7 +683,7 @@ static int load_flat_file(struct linux_b + } + if (IS_ERR_VALUE(result)) { + printk("Unable to read code+data+bss, errno %d\n",(int)-result); +- do_munmap(current->mm, textpos, text_len + data_len + extra + ++ do_munmap(current->mm, memp, text_len + data_len + extra + + MAX_SHARED_LIBS * sizeof(unsigned long)); + ret = result; + goto err; +@@ -671,6 +696,9 @@ static int load_flat_file(struct linux_b + + /* The main program needs a little extra setup in the task structure */ + start_code = textpos + sizeof (struct flat_hdr); ++#ifdef ARCH_FLAT_ALIGN_TEXT ++ BUG_ON(ALIGN(start_code, FLAT_DATA_ALIGN) != start_code); ++#endif + end_code = textpos + text_len; + if (id == 0) { + current->mm->start_code = start_code; +@@ -799,6 +827,13 @@ static int load_flat_file(struct linux_b + + return 0; + err: ++ if (flush_happened) { ++ /* ++ * The parent process has already started running. We cannot allow the child to return back to user space ++ * as this child is still uning the parent stack and 2 will clobber each other. We are going to kill this child. ++ */ ++ do_exit(SIGTERM); ++ } + return ret; + } + +--- a/fs/Kconfig.binfmt ++++ b/fs/Kconfig.binfmt +@@ -30,7 +30,7 @@ config COMPAT_BINFMT_ELF + config BINFMT_ELF_FDPIC + bool "Kernel support for FDPIC ELF binaries" + default y +- depends on (FRV || BLACKFIN || (SUPERH32 && !MMU)) ++ depends on (FRV || BLACKFIN || (SUPERH32 && !MMU) || UBICOM32) + help + ELF FDPIC binaries are based on ELF, but allow the individual load + segments of a binary to be located in memory independently of each +--- a/include/asm-generic/resource.h ++++ b/include/asm-generic/resource.h +@@ -69,13 +69,16 @@ + /* + * boot-time rlimit defaults for the init task: + */ ++#ifndef CONFIG_ELF_CORE ++#define CONFIG_USER_ELF_CORE_SIZE 0 ++#endif + #define INIT_RLIMITS \ + { \ + [RLIMIT_CPU] = { RLIM_INFINITY, RLIM_INFINITY }, \ + [RLIMIT_FSIZE] = { RLIM_INFINITY, RLIM_INFINITY }, \ + [RLIMIT_DATA] = { RLIM_INFINITY, RLIM_INFINITY }, \ + [RLIMIT_STACK] = { _STK_LIM, _STK_LIM_MAX }, \ +- [RLIMIT_CORE] = { 0, RLIM_INFINITY }, \ ++ [RLIMIT_CORE] = { CONFIG_USER_ELF_CORE_SIZE, RLIM_INFINITY }, \ + [RLIMIT_RSS] = { RLIM_INFINITY, RLIM_INFINITY }, \ + [RLIMIT_NPROC] = { 0, 0 }, \ + [RLIMIT_NOFILE] = { INR_OPEN, INR_OPEN }, \ +--- a/include/linux/elf-em.h ++++ b/include/linux/elf-em.h +@@ -41,6 +41,7 @@ + * up with a final number. + */ + #define EM_ALPHA 0x9026 ++#define EM_UBICOM32 0xde3d /* Ubicom32; no ABI */ + + /* Bogus old v850 magic number, used by old tools. */ + #define EM_CYGNUS_V850 0x9080 +--- a/include/linux/fb.h ++++ b/include/linux/fb.h +@@ -152,6 +152,10 @@ struct dentry; + #define FB_ACCEL_PROSAVAGE_DDR 0x8d /* S3 ProSavage DDR */ + #define FB_ACCEL_PROSAVAGE_DDRK 0x8e /* S3 ProSavage DDR-K */ + ++#define FB_ACCEL_UBICOM32 0x0100 /* Ubicom32 */ ++#define FB_ACCEL_UBICOM32_VFB 0x0101 /* Ubicom32 VFB */ ++#define FB_ACCEL_UBICOM32_PLIO80 0x0102 /* Ubicom32 PLIO80 */ ++ + struct fb_fix_screeninfo { + char id[16]; /* identification string eg "TT Builtin" */ + unsigned long smem_start; /* Start of frame buffer mem */ +--- a/include/linux/if_ppp.h ++++ b/include/linux/if_ppp.h +@@ -114,14 +114,14 @@ struct pppol2tp_ioc_stats { + __u16 tunnel_id; /* redundant */ + __u16 session_id; /* if zero, get tunnel stats */ + __u32 using_ipsec:1; /* valid only for session_id == 0 */ +- aligned_u64 tx_packets; +- aligned_u64 tx_bytes; +- aligned_u64 tx_errors; +- aligned_u64 rx_packets; +- aligned_u64 rx_bytes; +- aligned_u64 rx_seq_discards; +- aligned_u64 rx_oos_packets; +- aligned_u64 rx_errors; ++ __u64 tx_packets; ++ __u64 tx_bytes; ++ __u64 tx_errors; ++ __u64 rx_packets; ++ __u64 rx_bytes; ++ __u64 rx_seq_discards; ++ __u64 rx_oos_packets; ++ __u64 rx_errors; + }; + + #define ifr__name b.ifr_ifrn.ifrn_name +--- a/include/linux/oprofile.h ++++ b/include/linux/oprofile.h +@@ -102,6 +102,8 @@ void oprofile_add_sample(struct pt_regs + */ + void oprofile_add_ext_sample(unsigned long pc, struct pt_regs * const regs, + unsigned long event, int is_kernel); ++void oprofile_add_ext_sample_cpu(unsigned long pc, struct pt_regs * const regs, ++ unsigned long event, int is_kernel, int cpu); + + /* Use this instead when the PC value is not from the regs. Doesn't + * backtrace. */ +--- a/include/linux/serial_core.h ++++ b/include/linux/serial_core.h +@@ -179,6 +179,9 @@ + /* BCM63xx family SoCs */ + #define PORT_BCM63XX 89 + ++/* Ubicom32 */ ++#define PORT_UBI32_UARTTIO 87 ++ + #ifdef __KERNEL__ + + #include +--- a/include/linux/slab.h ++++ b/include/linux/slab.h +@@ -328,4 +328,14 @@ static inline void *kzalloc_node(size_t + + void __init kmem_cache_init_late(void); + ++struct kmem_cache_size_info { ++ unsigned short page; ++ unsigned short order; ++}; ++ ++/* ++ * get info on all the memory allocated by slab for this named cache ++ */ ++extern int kmem_cache_block_info(char *name, struct kmem_cache_size_info *data, int max_data); ++ + #endif /* _LINUX_SLAB_H */ +--- a/init/Kconfig ++++ b/init/Kconfig +@@ -844,6 +844,12 @@ config ELF_CORE + help + Enable support for generating core dumps. Disabling saves about 4k. + ++config USER_ELF_CORE_SIZE ++ int "user core dump size (10MB to 32MB)" ++ range 10485760 33554432 ++ default 16777216 ++ depends on ELF_CORE ++ + config PCSPKR_PLATFORM + bool "Enable PC-Speaker support" if EMBEDDED + depends on ALPHA || X86 || MIPS || PPC_PREP || PPC_CHRP || PPC_PSERIES +--- a/kernel/module.c ++++ b/kernel/module.c +@@ -2945,6 +2945,9 @@ static int m_show(struct seq_file *m, vo + /* Used by oprofile and other similar tools. */ + seq_printf(m, " 0x%p", mod->module_core); + ++#ifdef ARCH_PROC_MODULES_EXTRA ++ ARCH_PROC_MODULES_EXTRA(m, mod); ++#endif + /* Taints info */ + if (mod->taints) + seq_printf(m, " %s", module_flags(mod, buf)); +@@ -3097,8 +3100,12 @@ void print_modules(void) + printk(KERN_DEFAULT "Modules linked in:"); + /* Most callers should already have preempt disabled, but make sure */ + preempt_disable(); +- list_for_each_entry_rcu(mod, &modules, list) ++ list_for_each_entry_rcu(mod, &modules, list) { + printk(" %s%s", mod->name, module_flags(mod, buf)); ++#ifdef ARCH_OOPS_MODULE_EXTRA ++ ARCH_OOPS_MODULE_EXTRA(mod); ++#endif ++ } + preempt_enable(); + if (last_unloaded_module[0]) + printk(" [last unloaded: %s]", last_unloaded_module); +--- a/kernel/sched_clock.c ++++ b/kernel/sched_clock.c +@@ -38,8 +38,7 @@ + */ + unsigned long long __attribute__((weak)) sched_clock(void) + { +- return (unsigned long long)(jiffies - INITIAL_JIFFIES) +- * (NSEC_PER_SEC / HZ); ++ return (get_jiffies_64() - INITIAL_JIFFIES) * (NSEC_PER_SEC / HZ); + } + + static __read_mostly int sched_clock_running; +--- a/lib/Kconfig.debug ++++ b/lib/Kconfig.debug +@@ -690,7 +690,7 @@ config FRAME_POINTER + bool "Compile the kernel with frame pointers" + depends on DEBUG_KERNEL && \ + (CRIS || M68K || M68KNOMMU || FRV || UML || \ +- AVR32 || SUPERH || BLACKFIN || MN10300) || \ ++ AVR32 || SUPERH || BLACKFIN || MN10300 || UBICOM32) || \ + ARCH_WANT_FRAME_POINTERS + default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS + help +--- a/mm/Makefile ++++ b/mm/Makefile +@@ -45,3 +45,5 @@ obj-$(CONFIG_MEMORY_FAILURE) += memory-f + obj-$(CONFIG_HWPOISON_INJECT) += hwpoison-inject.o + obj-$(CONFIG_DEBUG_KMEMLEAK) += kmemleak.o + obj-$(CONFIG_DEBUG_KMEMLEAK_TEST) += kmemleak-test.o ++ ++CFLAGS_slab.o := $(PROFILING) -O2 +--- a/mm/slab.c ++++ b/mm/slab.c +@@ -4086,6 +4086,68 @@ out: + + #ifdef CONFIG_SLABINFO + ++ ++/* ++ * get info on all the memory allocated by slab for this named cache ++ */ ++int kmem_cache_block_info(char *name, struct kmem_cache_size_info *data, int max_data) ++{ ++ int res = 0; ++ int found = 0; ++ int node; ++ struct kmem_cache *cachep; ++ struct kmem_list3 *l3; ++ struct slab *slabp; ++ ++ /* Find the cache in the chain of caches. */ ++ mutex_lock(&cache_chain_mutex); ++ list_for_each_entry(cachep, &cache_chain, next) { ++ if (strcmp(cachep->name, name) == 0) { ++ found = 1; ++ break; ++ } ++ } ++ mutex_unlock(&cache_chain_mutex); ++ if (!found) { ++ return 0; ++ } ++ for_each_online_node(node) { ++ l3 = cachep->nodelists[node]; ++ if (!l3) ++ continue; ++ if (res >= max_data) ++ break; ++ check_irq_on(); ++ spin_lock_irq(&l3->list_lock); ++ ++ list_for_each_entry(slabp, &l3->slabs_full, list) { ++ if (res >= max_data) ++ break; ++ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff; ++ data[res].order = cachep->gfporder; ++ res++; ++ } ++ list_for_each_entry(slabp, &l3->slabs_partial, list) { ++ if (res >= max_data) ++ break; ++ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff; ++ data[res].order = cachep->gfporder; ++ res++; ++ } ++ list_for_each_entry(slabp, &l3->slabs_free, list) { ++ if (res >= max_data) ++ break; ++ data[res].page = ((unsigned int)slabp->s_mem >> PAGE_SHIFT) & 0xffff; ++ data[res].order = cachep->gfporder; ++ res++; ++ } ++ ++ spin_unlock_irq(&l3->list_lock); ++ } ++ ++ return res; ++} ++ + static void print_slabinfo_header(struct seq_file *m) + { + /* +--- a/scripts/mod/file2alias.c ++++ b/scripts/mod/file2alias.c +@@ -783,6 +783,15 @@ void handle_moddevtable(struct module *m + + sym->st_value; + } + ++ /* ++ * somehow our gcc is not generating st_size correctly and set 0 for some symbols. ++ * and 0 size will break do_table since it adjust size to (size - id_size) ++ * this is to make sure st_size fall in range. ++ */ ++ if (sym->st_size == 0 || sym->st_size > info->sechdrs[sym->st_shndx].sh_size) { ++ sym->st_size = info->sechdrs[sym->st_shndx].sh_size; ++ } ++ + if (sym_is(symname, "__mod_pci_device_table")) + do_table(symval, sym->st_size, + sizeof(struct pci_device_id), "pci", +--- a/sound/Kconfig ++++ b/sound/Kconfig +@@ -110,6 +110,8 @@ source "sound/parisc/Kconfig" + + source "sound/soc/Kconfig" + ++source "sound/ubicom32/Kconfig" ++ + endif # SND + + menuconfig SOUND_PRIME +--- a/sound/Makefile ++++ b/sound/Makefile +@@ -6,7 +6,7 @@ obj-$(CONFIG_SOUND_PRIME) += sound_firmw + obj-$(CONFIG_SOUND_PRIME) += oss/ + obj-$(CONFIG_DMASOUND) += oss/ + obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \ +- sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ ++ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ atmel/ ubicom32/ + obj-$(CONFIG_SND_AOA) += aoa/ + + # This one must be compilable even if sound is configured out diff --git a/target/linux/ubicom32/patches-2.6.32/110-vmlinux_lds_fix.patch b/target/linux/ubicom32/patches-2.6.32/110-vmlinux_lds_fix.patch new file mode 100644 index 0000000000..1a14308874 --- /dev/null +++ b/target/linux/ubicom32/patches-2.6.32/110-vmlinux_lds_fix.patch @@ -0,0 +1,150 @@ +--- a/arch/ubicom32/kernel/vmlinux.lds.S ++++ b/arch/ubicom32/kernel/vmlinux.lds.S +@@ -25,7 +25,6 @@ + * arch/blackfin + * arch/parisc + */ +-#include + #include + #include + #include +@@ -201,94 +200,28 @@ SECTIONS { + *(__ex_table) + __stop___ex_table = .; + +- *(.rodata) *(.rodata.*) +- *(__vermagic) /* Kernel version magic */ +- *(__markers_strings) +- *(.rodata1) +- *(.rodata.str1.1) +- *(__tracepoints_strings) +- +- /* PCI quirks */ +- __start_pci_fixups_early = . ; +- *(.pci_fixup_early) +- __end_pci_fixups_early = . ; +- __start_pci_fixups_header = . ; +- *(.pci_fixup_header) +- __end_pci_fixups_header = . ; +- __start_pci_fixups_final = . ; +- *(.pci_fixup_final) +- __end_pci_fixups_final = . ; +- __start_pci_fixups_enable = . ; +- *(.pci_fixup_enable) +- __end_pci_fixups_enable = . ; +- __start_pci_fixups_resume = . ; +- *(.pci_fixup_resume) +- __end_pci_fixups_resume = . ; +- __start_pci_fixups_resume_early = . ; +- *(.pci_fixup_resume_early) +- __end_pci_fixups_resume_early = . ; +- __start_pci_fixups_suspend = . ; +- *(.pci_fixup_suspend) +- __end_pci_fixups_suspend = . ; +- +- __start_builtin_fw = . ; +- *(.builtin_fw) +- __end_builtin_fw = . ; +- +- +- /* Kernel symbol table: Normal symbols */ +- . = ALIGN(4); +- __start___ksymtab = .; +- *(__ksymtab) +- __stop___ksymtab = .; +- +- /* Kernel symbol table: GPL-only symbols */ +- __start___ksymtab_gpl = .; +- *(__ksymtab_gpl) +- __stop___ksymtab_gpl = .; +- +- /* Kernel symbol table: Normal unused symbols */ +- __start___ksymtab_unused = .; +- *(__ksymtab_unused) +- __stop___ksymtab_unused = .; +- +- /* Kernel symbol table: GPL-only unused symbols */ +- __start___ksymtab_unused_gpl = .; +- *(__ksymtab_unused_gpl) +- __stop___ksymtab_unused_gpl = .; +- +- /* Kernel symbol table: GPL-future symbols */ +- __start___ksymtab_gpl_future = .; +- *(__ksymtab_gpl_future) +- __stop___ksymtab_gpl_future = .; +- +- /* Kernel symbol table: Normal symbols */ +- __start___kcrctab = .; +- *(__kcrctab) +- __stop___kcrctab = .; +- +- /* Kernel symbol table: GPL-only symbols */ +- __start___kcrctab_gpl = .; +- *(__kcrctab_gpl) +- __stop___kcrctab_gpl = .; +- +- /* Kernel symbol table: GPL-future symbols */ +- __start___kcrctab_gpl_future = .; +- *(__kcrctab_gpl_future) +- __stop___kcrctab_gpl_future = .; ++ } > TEXT + +- /* Kernel symbol table: strings */ +- *(__ksymtab_strings) ++ RO_DATA(16) + +- /* Built-in module parameters */ +- . = ALIGN(4) ; +- __start___param = .; +- *(__param) +- __stop___param = .; ++ .rodata : {} > TEXT ++ .rodata1 : {} > TEXT ++ .pci_fixup : {} > TEXT ++ .builtin_fw : {} > TEXT ++ .rio_route : {} > TEXT ++ .tracedata : {} > TEXT ++ __ksymtab : {} > TEXT ++ __ksymtab_gpl : {} > TEXT ++ __ksymtab_gpl_future : {} > TEXT ++ __kcrctab_gpl : {} > TEXT ++ __kcrctab_unused : {} > TEXT ++ __kcrctab_unused_gpl : {} > TEXT ++ __kcrctab_gpl_future : {} > TEXT ++ __ksymtab_strings : {} > TEXT ++ __init_rodata : {} > TEXT ++ __param : {} > TEXT + +- . = ALIGN(4) ; +- _etext = . ; +- } > TEXT ++ _etext = .; + + .data DATA_ADDR : { + . = ALIGN(4); +@@ -349,12 +282,6 @@ SECTIONS { + PROVIDE (___eh_frame_end = .); + } > INIT + +- /DISCARD/ : { +- EXIT_TEXT +- EXIT_DATA +- *(.exitcall.exit) +- } +- + .bss : { + . = ALIGN(4); + _sbss = . ; +@@ -365,6 +292,12 @@ SECTIONS { + _end = . ; + } > BSS + ++ /DISCARD/ : { ++ EXIT_TEXT ++ EXIT_DATA ++ *(.exitcall.exit) ++ } ++ + NOTES > BSS + + } diff --git a/target/linux/ubicom32/patches-2.6.32/120-libgcc_func.patch b/target/linux/ubicom32/patches-2.6.32/120-libgcc_func.patch new file mode 100644 index 0000000000..fee4ece003 --- /dev/null +++ b/target/linux/ubicom32/patches-2.6.32/120-libgcc_func.patch @@ -0,0 +1,419 @@ +--- a/arch/ubicom32/Makefile ++++ b/arch/ubicom32/Makefile +@@ -60,9 +60,6 @@ cflags-$(CONFIG_UBICOM32_V4) := -march= + ldflags-$(CONFIG_LINKER_RELAXATION) := --relax + LDFLAGS_vmlinux := $(ldflags-y) + +-GCCLIBDIR := $(dir $(shell $(CC) $(cflags-y) -print-libgcc-file-name)) +-GCC_LIBS := $(GCCLIBDIR)/libgcc.a +- + KBUILD_CFLAGS += $(cflags-y) -ffunction-sections + KBUILD_AFLAGS += $(cflags-y) + +@@ -84,7 +81,6 @@ core-y += arch/$(ARCH)/kernel/ \ + drivers-$(CONFIG_OPROFILE) += arch/ubicom32/oprofile/ + + libs-y += arch/$(ARCH)/lib/ +-libs-y += $(GCC_LIBS) + + archclean: + +--- a/arch/ubicom32/lib/Makefile ++++ b/arch/ubicom32/lib/Makefile +@@ -30,3 +30,4 @@ + # + + lib-y := checksum.o delay.o mem_ubicom32.o ++lib-y += ashldi3.o ashrdi3.o divmod.o lshrdi3.o muldi3.o +--- /dev/null ++++ b/arch/ubicom32/lib/ashldi3.c +@@ -0,0 +1,62 @@ ++/* ashrdi3.c extracted from gcc-2.95.2/libgcc2.c which is: */ ++/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc. ++ ++This file is part of GNU CC. ++ ++GNU CC is free software; you can redistribute it and/or modify ++it under the terms of the GNU General Public License as published by ++the Free Software Foundation; either version 2, or (at your option) ++any later version. ++ ++GNU CC is distributed in the hope that it will be useful, ++but WITHOUT ANY WARRANTY; without even the implied warranty of ++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++GNU General Public License for more details. ++ ++You should have received a copy of the GNU General Public License ++along with GNU CC; see the file COPYING. If not, write to ++the Free Software Foundation, 59 Temple Place - Suite 330, ++Boston, MA 02111-1307, USA. */ ++ ++#define BITS_PER_UNIT 8 ++ ++typedef int SItype __attribute__ ((mode (SI))); ++typedef unsigned int USItype __attribute__ ((mode (SI))); ++typedef int DItype __attribute__ ((mode (DI))); ++typedef int word_type __attribute__ ((mode (__word__))); ++ ++struct DIstruct {SItype high, low;}; ++ ++typedef union ++{ ++ struct DIstruct s; ++ DItype ll; ++} DIunion; ++ ++DItype ++__ashldi3 (DItype u, word_type b) ++{ ++ DIunion w; ++ word_type bm; ++ DIunion uu; ++ ++ if (b == 0) ++ return u; ++ ++ uu.ll = u; ++ ++ bm = (sizeof (SItype) * BITS_PER_UNIT) - b; ++ if (bm <= 0) ++ { ++ w.s.low = 0; ++ w.s.high = (USItype)uu.s.low << -bm; ++ } ++ else ++ { ++ USItype carries = (USItype)uu.s.low >> bm; ++ w.s.low = (USItype)uu.s.low << b; ++ w.s.high = ((USItype)uu.s.high << b) | carries; ++ } ++ ++ return w.ll; ++} +--- /dev/null ++++ b/arch/ubicom32/lib/ashrdi3.c +@@ -0,0 +1,63 @@ ++/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */ ++/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. ++ ++This file is part of GNU CC. ++ ++GNU CC is free software; you can redistribute it and/or modify ++it under the terms of the GNU General Public License as published by ++the Free Software Foundation; either version 2, or (at your option) ++any later version. ++ ++GNU CC is distributed in the hope that it will be useful, ++but WITHOUT ANY WARRANTY; without even the implied warranty of ++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++GNU General Public License for more details. ++ ++You should have received a copy of the GNU General Public License ++along with GNU CC; see the file COPYING. If not, write to ++the Free Software Foundation, 59 Temple Place - Suite 330, ++Boston, MA 02111-1307, USA. */ ++ ++#define BITS_PER_UNIT 8 ++ ++typedef int SItype __attribute__ ((mode (SI))); ++typedef unsigned int USItype __attribute__ ((mode (SI))); ++typedef int DItype __attribute__ ((mode (DI))); ++typedef int word_type __attribute__ ((mode (__word__))); ++ ++struct DIstruct {SItype high, low;}; ++ ++typedef union ++{ ++ struct DIstruct s; ++ DItype ll; ++} DIunion; ++ ++DItype ++__ashrdi3 (DItype u, word_type b) ++{ ++ DIunion w; ++ word_type bm; ++ DIunion uu; ++ ++ if (b == 0) ++ return u; ++ ++ uu.ll = u; ++ ++ bm = (sizeof (SItype) * BITS_PER_UNIT) - b; ++ if (bm <= 0) ++ { ++ /* w.s.high = 1..1 or 0..0 */ ++ w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1); ++ w.s.low = uu.s.high >> -bm; ++ } ++ else ++ { ++ USItype carries = (USItype)uu.s.high << bm; ++ w.s.high = uu.s.high >> b; ++ w.s.low = ((USItype)uu.s.low >> b) | carries; ++ } ++ ++ return w.ll; ++} +--- /dev/null ++++ b/arch/ubicom32/lib/divmod.c +@@ -0,0 +1,85 @@ ++unsigned long ++udivmodsi4(unsigned long num, unsigned long den, int modwanted) ++{ ++ unsigned long bit = 1; ++ unsigned long res = 0; ++ ++ while (den < num && bit && !(den & (1L<<31))) ++ { ++ den <<=1; ++ bit <<=1; ++ } ++ while (bit) ++ { ++ if (num >= den) ++ { ++ num -= den; ++ res |= bit; ++ } ++ bit >>=1; ++ den >>=1; ++ } ++ if (modwanted) return num; ++ return res; ++} ++ ++long ++__udivsi3 (long a, long b) ++{ ++ return udivmodsi4 (a, b, 0); ++} ++ ++long ++__umodsi3 (long a, long b) ++{ ++ return udivmodsi4 (a, b, 1); ++} ++ ++long ++__divsi3 (long a, long b) ++{ ++ int neg = 0; ++ long res; ++ ++ if (a < 0) ++ { ++ a = -a; ++ neg = !neg; ++ } ++ ++ if (b < 0) ++ { ++ b = -b; ++ neg = !neg; ++ } ++ ++ res = udivmodsi4 (a, b, 0); ++ ++ if (neg) ++ res = -res; ++ ++ return res; ++} ++ ++long ++__modsi3 (long a, long b) ++{ ++ int neg = 0; ++ long res; ++ ++ if (a < 0) ++ { ++ a = -a; ++ neg = 1; ++ } ++ ++ if (b < 0) ++ b = -b; ++ ++ res = udivmodsi4 (a, b, 1); ++ ++ if (neg) ++ res = -res; ++ ++ return res; ++} +--- /dev/null ++++ b/arch/ubicom32/lib/lshrdi3.c +@@ -0,0 +1,62 @@ ++/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */ ++/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. ++ ++This file is part of GNU CC. ++ ++GNU CC is free software; you can redistribute it and/or modify ++it under the terms of the GNU General Public License as published by ++the Free Software Foundation; either version 2, or (at your option) ++any later version. ++ ++GNU CC is distributed in the hope that it will be useful, ++but WITHOUT ANY WARRANTY; without even the implied warranty of ++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++GNU General Public License for more details. ++ ++You should have received a copy of the GNU General Public License ++along with GNU CC; see the file COPYING. If not, write to ++the Free Software Foundation, 59 Temple Place - Suite 330, ++Boston, MA 02111-1307, USA. */ ++ ++#define BITS_PER_UNIT 8 ++ ++typedef int SItype __attribute__ ((mode (SI))); ++typedef unsigned int USItype __attribute__ ((mode (SI))); ++typedef int DItype __attribute__ ((mode (DI))); ++typedef int word_type __attribute__ ((mode (__word__))); ++ ++struct DIstruct {SItype high, low;}; ++ ++typedef union ++{ ++ struct DIstruct s; ++ DItype ll; ++} DIunion; ++ ++DItype ++__lshrdi3 (DItype u, word_type b) ++{ ++ DIunion w; ++ word_type bm; ++ DIunion uu; ++ ++ if (b == 0) ++ return u; ++ ++ uu.ll = u; ++ ++ bm = (sizeof (SItype) * BITS_PER_UNIT) - b; ++ if (bm <= 0) ++ { ++ w.s.high = 0; ++ w.s.low = (USItype)uu.s.high >> -bm; ++ } ++ else ++ { ++ USItype carries = (USItype)uu.s.high << bm; ++ w.s.high = (USItype)uu.s.high >> b; ++ w.s.low = ((USItype)uu.s.low >> b) | carries; ++ } ++ ++ return w.ll; ++} +--- /dev/null ++++ b/arch/ubicom32/lib/muldi3.c +@@ -0,0 +1,87 @@ ++/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and ++ gcc-2.7.2.3/longlong.h which is: */ ++/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. ++ ++This file is part of GNU CC. ++ ++GNU CC is free software; you can redistribute it and/or modify ++it under the terms of the GNU General Public License as published by ++the Free Software Foundation; either version 2, or (at your option) ++any later version. ++ ++GNU CC is distributed in the hope that it will be useful, ++but WITHOUT ANY WARRANTY; without even the implied warranty of ++MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++GNU General Public License for more details. ++ ++You should have received a copy of the GNU General Public License ++along with GNU CC; see the file COPYING. If not, write to ++the Free Software Foundation, 59 Temple Place - Suite 330, ++Boston, MA 02111-1307, USA. */ ++ ++#define UWtype USItype ++#define UHWtype USItype ++#define W_TYPE_SIZE 32 ++#define __BITS4 (W_TYPE_SIZE / 4) ++#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2)) ++#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1)) ++#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2)) ++ ++#define umul_ppmm(w1, w0, u, v) \ ++ do { \ ++ UWtype __x0, __x1, __x2, __x3; \ ++ UHWtype __ul, __vl, __uh, __vh; \ ++ \ ++ __ul = __ll_lowpart (u); \ ++ __uh = __ll_highpart (u); \ ++ __vl = __ll_lowpart (v); \ ++ __vh = __ll_highpart (v); \ ++ \ ++ __x0 = (UWtype) __ul * __vl; \ ++ __x1 = (UWtype) __ul * __vh; \ ++ __x2 = (UWtype) __uh * __vl; \ ++ __x3 = (UWtype) __uh * __vh; \ ++ \ ++ __x1 += __ll_highpart (__x0);/* this can't give carry */ \ ++ __x1 += __x2; /* but this indeed can */ \ ++ if (__x1 < __x2) /* did we get it? */ \ ++ __x3 += __ll_B; /* yes, add it in the proper pos. */ \ ++ \ ++ (w1) = __x3 + __ll_highpart (__x1); \ ++ (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \ ++ } while (0) ++ ++ ++#define __umulsidi3(u, v) \ ++ ({DIunion __w; \ ++ umul_ppmm (__w.s.high, __w.s.low, u, v); \ ++ __w.ll; }) ++ ++typedef int SItype __attribute__ ((mode (SI))); ++typedef unsigned int USItype __attribute__ ((mode (SI))); ++typedef int DItype __attribute__ ((mode (DI))); ++typedef int word_type __attribute__ ((mode (__word__))); ++ ++struct DIstruct {SItype high, low;}; ++ ++typedef union ++{ ++ struct DIstruct s; ++ DItype ll; ++} DIunion; ++ ++DItype ++__muldi3 (DItype u, DItype v) ++{ ++ DIunion w; ++ DIunion uu, vv; ++ ++ uu.ll = u, ++ vv.ll = v; ++ ++ w.ll = __umulsidi3 (uu.s.low, vv.s.low); ++ w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high ++ + (USItype) uu.s.high * (USItype) vv.s.low); ++ ++ return w.ll; ++} +--- a/arch/ubicom32/kernel/ubicom32_ksyms.c ++++ b/arch/ubicom32/kernel/ubicom32_ksyms.c +@@ -72,7 +72,6 @@ EXPORT_SYMBOL(memmove); + extern void __ashldi3(void); + extern void __ashrdi3(void); + extern void __divsi3(void); +-extern void __divdi3(void); + extern void __lshrdi3(void); + extern void __modsi3(void); + extern void __muldi3(void); +@@ -83,7 +82,6 @@ extern void __umodsi3(void); + EXPORT_SYMBOL(__ashldi3); + EXPORT_SYMBOL(__ashrdi3); + EXPORT_SYMBOL(__divsi3); +-EXPORT_SYMBOL(__divdi3); + EXPORT_SYMBOL(__lshrdi3); + EXPORT_SYMBOL(__modsi3); + EXPORT_SYMBOL(__muldi3); diff --git a/target/linux/ubicom32/patches-2.6.32/130-flash_driver_fix.patch b/target/linux/ubicom32/patches-2.6.32/130-flash_driver_fix.patch new file mode 100644 index 0000000000..95fa50807b --- /dev/null +++ b/target/linux/ubicom32/patches-2.6.32/130-flash_driver_fix.patch @@ -0,0 +1,13 @@ +--- a/drivers/mtd/devices/ubi32-m25p80.c ++++ b/drivers/mtd/devices/ubi32-m25p80.c +@@ -630,8 +630,8 @@ static int ubicom32_flash_driver_erase(s + /* sanity checks */ + if (instr->addr + instr->len > flash->mtd.size) + return -EINVAL; +- if ((instr->addr % mtd->erasesize) != 0 +- || (instr->len % mtd->erasesize) != 0) { ++ if (((u32) instr->addr % mtd->erasesize) != 0 ++ || ((u32) instr->len % mtd->erasesize) != 0) { + return -EINVAL; + } + diff --git a/target/linux/ubicom32/patches-2.6.32/140-arch_cflags.patch b/target/linux/ubicom32/patches-2.6.32/140-arch_cflags.patch new file mode 100644 index 0000000000..aa1396e419 --- /dev/null +++ b/target/linux/ubicom32/patches-2.6.32/140-arch_cflags.patch @@ -0,0 +1,13 @@ +--- a/arch/ubicom32/Makefile ++++ b/arch/ubicom32/Makefile +@@ -54,8 +54,8 @@ CFLAGS_MODULE += -mno-fastcall + # + # Some CFLAG additions based on specific CPU type. + # +-cflags-$(CONFIG_UBICOM32_V3) := -march=ubicom32v3 -DIP5000 +-cflags-$(CONFIG_UBICOM32_V4) := -march=ubicom32v4 -DIP7000 ++cflags-$(CONFIG_UBICOM32_V3) := -march=ubicom32v3 -mno-fdpic -DIP5000 ++cflags-$(CONFIG_UBICOM32_V4) := -march=ubicom32v4 -mno-fdpic -DIP7000 + + ldflags-$(CONFIG_LINKER_RELAXATION) := --relax + LDFLAGS_vmlinux := $(ldflags-y)