From: Hauke Mehrtens Date: Thu, 7 Aug 2014 20:21:11 +0000 (+0000) Subject: brcm47xx: 3.14: backport MIPS patches for early HIGHMEM support X-Git-Tag: reboot~6288 X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=commitdiff_plain;h=4ec288bfa46ca58c67d9e81fee2427ee065dd398 brcm47xx: 3.14: backport MIPS patches for early HIGHMEM support Signed-off-by: Rafał Miłecki SVN-Revision: 42053 --- diff --git a/target/linux/brcm47xx/patches-3.14/149-MIPS-BCM47XX-Move-shared-symbols-to-the-config-BCM47.patch b/target/linux/brcm47xx/patches-3.14/149-MIPS-BCM47XX-Move-shared-symbols-to-the-config-BCM47.patch new file mode 100644 index 0000000000..4babed992f --- /dev/null +++ b/target/linux/brcm47xx/patches-3.14/149-MIPS-BCM47XX-Move-shared-symbols-to-the-config-BCM47.patch @@ -0,0 +1,50 @@ +From c949c0bc55571209fe6742f645b1e2eb20099591 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Tue, 17 Jun 2014 16:36:50 +0200 +Subject: [PATCH 149/150] MIPS: BCM47XX: Move shared symbols to the config + BCM47XX +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Rafał Miłecki +Cc: linux-mips@linux-mips.org +Cc: Hauke Mehrtens +Patchwork: https://patchwork.linux-mips.org/patch/7100/ +Signed-off-by: Ralf Baechle +--- + arch/mips/Kconfig | 2 ++ + arch/mips/bcm47xx/Kconfig | 4 ---- + 2 files changed, 2 insertions(+), 4 deletions(-) + +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -124,6 +124,8 @@ config BCM47XX + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK + select EARLY_PRINTK_8250 if EARLY_PRINTK ++ select GPIOLIB ++ select LEDS_GPIO_REGISTER + help + Support for BCM47XX based boards + +--- a/arch/mips/bcm47xx/Kconfig ++++ b/arch/mips/bcm47xx/Kconfig +@@ -11,8 +11,6 @@ config BCM47XX_SSB + select SSB_DRIVER_PCICORE if PCI + select SSB_PCICORE_HOSTMODE if PCI + select SSB_DRIVER_GPIO +- select GPIOLIB +- select LEDS_GPIO_REGISTER + default y + help + Add support for old Broadcom BCM47xx boards with Sonics Silicon Backplane support. +@@ -29,8 +27,6 @@ config BCM47XX_BCMA + select BCMA_HOST_PCI if PCI + select BCMA_DRIVER_PCI_HOSTMODE if PCI + select BCMA_DRIVER_GPIO +- select GPIOLIB +- select LEDS_GPIO_REGISTER + default y + help + Add support for new Broadcom BCM47xx boards with Broadcom specific Advanced Microcontroller Bus. diff --git a/target/linux/brcm47xx/patches-3.14/150-MIPS-BCM47XX-Select-SYS_SUPPORTS_HIGHMEM-for-BCM47XX.patch b/target/linux/brcm47xx/patches-3.14/150-MIPS-BCM47XX-Select-SYS_SUPPORTS_HIGHMEM-for-BCM47XX.patch new file mode 100644 index 0000000000..2fa44428b1 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.14/150-MIPS-BCM47XX-Select-SYS_SUPPORTS_HIGHMEM-for-BCM47XX.patch @@ -0,0 +1,32 @@ +From ce01cbef8b0b71d01f8a68cba59da3198165bae6 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Tue, 17 Jun 2014 16:36:51 +0200 +Subject: [PATCH 150/150] MIPS: BCM47XX: Select SYS_SUPPORTS_HIGHMEM for + BCM47XX_BCMA +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +It seems that bcm47xx can handle only 128 MiB of RAM directly. There +are few devices with 256 MiB, but Broadcom's SDK uses highmem to handle +anything above 128 MiB. + +Signed-off-by: Rafał Miłecki +Cc: linux-mips@linux-mips.org +Cc: Hauke Mehrtens +Patchwork: https://patchwork.linux-mips.org/patch/7101/ +Signed-off-by: Ralf Baechle +--- + arch/mips/bcm47xx/Kconfig | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/mips/bcm47xx/Kconfig ++++ b/arch/mips/bcm47xx/Kconfig +@@ -20,6 +20,7 @@ config BCM47XX_SSB + config BCM47XX_BCMA + bool "BCMA Support for Broadcom BCM47XX" + select SYS_HAS_CPU_MIPS32_R2 ++ select SYS_SUPPORTS_HIGHMEM + select CPU_MIPSR2_IRQ_VI + select BCMA + select BCMA_HOST_SOC diff --git a/target/linux/brcm47xx/patches-3.14/152-Revert-MIPS-Delete-unused-function-add_temporary_ent.patch b/target/linux/brcm47xx/patches-3.14/152-Revert-MIPS-Delete-unused-function-add_temporary_ent.patch new file mode 100644 index 0000000000..7d8101647c --- /dev/null +++ b/target/linux/brcm47xx/patches-3.14/152-Revert-MIPS-Delete-unused-function-add_temporary_ent.patch @@ -0,0 +1,107 @@ +From d377732c8c9aac14ccb900b65678558b0fb8f0f3 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 17 Jul 2014 23:26:32 +0200 +Subject: [PATCH 152/153] Revert "MIPS: Delete unused function + add_temporary_entry." +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This reverts commit d7a887a73dec6c387b02a966a71aac767bbd9ce6. + +Function add_temporary_entry is needed by bcm47xx to support highmem. We +need to add a temporary entry to check for amount of RAM. +The only change made in this revert was replacing (ENTER|EXIT)_CRITICAL. + +Signed-off-by: Rafał Miłecki +Cc: linux-mips@linux-mips.org +Cc: Hauke Mehrtens +Patchwork: https://patchwork.linux-mips.org/patch/7395/ +Signed-off-by: Ralf Baechle +--- + arch/mips/include/asm/pgtable-32.h | 10 ++++++++ + arch/mips/mm/tlb-r4k.c | 47 ++++++++++++++++++++++++++++++++++++++ + 2 files changed, 57 insertions(+) + +--- a/arch/mips/include/asm/pgtable-32.h ++++ b/arch/mips/include/asm/pgtable-32.h +@@ -19,6 +19,16 @@ + #include + + /* ++ * - add_temporary_entry() add a temporary TLB entry. We use TLB entries ++ * starting at the top and working down. This is for populating the ++ * TLB before trap_init() puts the TLB miss handler in place. It ++ * should be used only for entries matching the actual page tables, ++ * to prevent inconsistencies. ++ */ ++extern int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, ++ unsigned long entryhi, unsigned long pagemask); ++ ++/* + * Basically we have the same two-level (which is the logical three level + * Linux page table layout folded) page tables as the i386. Some day + * when we have proper page coloring support we can have a 1% quicker +--- a/arch/mips/mm/tlb-r4k.c ++++ b/arch/mips/mm/tlb-r4k.c +@@ -411,6 +411,51 @@ int __init has_transparent_hugepage(void + + #endif /* CONFIG_TRANSPARENT_HUGEPAGE */ + ++/* ++ * Used for loading TLB entries before trap_init() has started, when we ++ * don't actually want to add a wired entry which remains throughout the ++ * lifetime of the system ++ */ ++ ++static int temp_tlb_entry __cpuinitdata; ++ ++__init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, ++ unsigned long entryhi, unsigned long pagemask) ++{ ++ int ret = 0; ++ unsigned long flags; ++ unsigned long wired; ++ unsigned long old_pagemask; ++ unsigned long old_ctx; ++ ++ local_irq_save(flags); ++ /* Save old context and create impossible VPN2 value */ ++ old_ctx = read_c0_entryhi(); ++ old_pagemask = read_c0_pagemask(); ++ wired = read_c0_wired(); ++ if (--temp_tlb_entry < wired) { ++ printk(KERN_WARNING ++ "No TLB space left for add_temporary_entry\n"); ++ ret = -ENOSPC; ++ goto out; ++ } ++ ++ write_c0_index(temp_tlb_entry); ++ write_c0_pagemask(pagemask); ++ write_c0_entryhi(entryhi); ++ write_c0_entrylo0(entrylo0); ++ write_c0_entrylo1(entrylo1); ++ mtc0_tlbw_hazard(); ++ tlb_write_indexed(); ++ tlbw_use_hazard(); ++ ++ write_c0_entryhi(old_ctx); ++ write_c0_pagemask(old_pagemask); ++out: ++ local_irq_restore(flags); ++ return ret; ++} ++ + static int ntlb; + static int __init set_ntlb(char *str) + { +@@ -448,6 +493,8 @@ void tlb_init(void) + write_c0_pagegrain(pg); + } + ++ temp_tlb_entry = current_cpu_data.tlbsize - 1; ++ + /* From this point on the ARC firmware is dead. */ + local_flush_tlb_all(); + diff --git a/target/linux/brcm47xx/patches-3.14/153-MIPS-BCM47XX-Detect-more-then-128-MiB-of-RAM-HIGHMEM.patch b/target/linux/brcm47xx/patches-3.14/153-MIPS-BCM47XX-Detect-more-then-128-MiB-of-RAM-HIGHMEM.patch new file mode 100644 index 0000000000..ad0dd7de73 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.14/153-MIPS-BCM47XX-Detect-more-then-128-MiB-of-RAM-HIGHMEM.patch @@ -0,0 +1,166 @@ +From 6ee1d93455384cef8a0426effe85da241b525b63 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Thu, 17 Jul 2014 23:26:33 +0200 +Subject: [PATCH 153/153] MIPS: BCM47XX: Detect more then 128 MiB of RAM + (HIGHMEM) +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +So far BCM47XX can only detect amount of HIGHMEM. It still requires +adding (registering) and well-testing before enabling by default. + +Signed-off-by: Rafał Miłecki +Acked-by: Hauke Mehrtens +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/7396/ +Signed-off-by: Ralf Baechle +--- + arch/mips/bcm47xx/bcm47xx_private.h | 3 ++ + arch/mips/bcm47xx/prom.c | 68 ++++++++++++++++++++++++++++++++++++- + arch/mips/bcm47xx/setup.c | 3 ++ + arch/mips/include/asm/pgtable-32.h | 2 ++ + arch/mips/mm/tlb-r4k.c | 2 +- + 5 files changed, 76 insertions(+), 2 deletions(-) + +--- a/arch/mips/bcm47xx/bcm47xx_private.h ++++ b/arch/mips/bcm47xx/bcm47xx_private.h +@@ -3,6 +3,9 @@ + + #include + ++/* prom.c */ ++void __init bcm47xx_prom_highmem_init(void); ++ + /* buttons.c */ + int __init bcm47xx_buttons_register(void); + +--- a/arch/mips/bcm47xx/prom.c ++++ b/arch/mips/bcm47xx/prom.c +@@ -51,6 +51,8 @@ __init void bcm47xx_set_system_type(u16 + chip_id); + } + ++static unsigned long lowmem __initdata; ++ + static __init void prom_init_mem(void) + { + unsigned long mem; +@@ -84,6 +86,7 @@ static __init void prom_init_mem(void) + if (!memcmp(prom_init, prom_init + mem, 32)) + break; + } ++ lowmem = mem; + + /* Ignoring the last page when ddr size is 128M. Cached + * accesses to last page is causing the processor to prefetch +@@ -92,7 +95,6 @@ static __init void prom_init_mem(void) + */ + if (c->cputype == CPU_74K && (mem == (128 << 20))) + mem -= 0x1000; +- + add_memory_region(0, mem, BOOT_MEM_RAM); + } + +@@ -111,3 +113,67 @@ void __init prom_init(void) + void __init prom_free_prom_memory(void) + { + } ++ ++#if defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM) ++ ++#define EXTVBASE 0xc0000000 ++#define ENTRYLO(x) ((pte_val(pfn_pte((x) >> _PFN_SHIFT, PAGE_KERNEL_UNCACHED)) >> 6) | 1) ++ ++#include ++ ++/* Stripped version of tlb_init, with the call to build_tlb_refill_handler ++ * dropped. Calling it at this stage causes a hang. ++ */ ++void __cpuinit early_tlb_init(void) ++{ ++ write_c0_pagemask(PM_DEFAULT_MASK); ++ write_c0_wired(0); ++ temp_tlb_entry = current_cpu_data.tlbsize - 1; ++ local_flush_tlb_all(); ++} ++ ++void __init bcm47xx_prom_highmem_init(void) ++{ ++ unsigned long off = (unsigned long)prom_init; ++ unsigned long extmem = 0; ++ bool highmem_region = false; ++ ++ if (WARN_ON(bcm47xx_bus_type != BCM47XX_BUS_TYPE_BCMA)) ++ return; ++ ++ if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706) ++ highmem_region = true; ++ ++ if (lowmem != 128 << 20 || !highmem_region) ++ return; ++ ++ early_tlb_init(); ++ ++ /* Add one temporary TLB entry to map SDRAM Region 2. ++ * Physical Virtual ++ * 0x80000000 0xc0000000 (1st: 256MB) ++ * 0x90000000 0xd0000000 (2nd: 256MB) ++ */ ++ add_temporary_entry(ENTRYLO(0x80000000), ++ ENTRYLO(0x80000000 + (256 << 20)), ++ EXTVBASE, PM_256M); ++ ++ off = EXTVBASE + __pa(off); ++ for (extmem = 128 << 20; extmem < 512 << 20; extmem <<= 1) { ++ if (!memcmp(prom_init, (void *)(off + extmem), 16)) ++ break; ++ } ++ extmem -= lowmem; ++ ++ early_tlb_init(); ++ ++ if (!extmem) ++ return; ++ ++ pr_warn("Found %lu MiB of extra memory, but highmem is unsupported yet!\n", ++ extmem >> 20); ++ ++ /* TODO: Register extra memory */ ++} ++ ++#endif /* defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM) */ +--- a/arch/mips/bcm47xx/setup.c ++++ b/arch/mips/bcm47xx/setup.c +@@ -218,6 +218,9 @@ void __init plat_mem_setup(void) + bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA; + bcm47xx_register_bcma(); + bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id); ++#ifdef CONFIG_HIGHMEM ++ bcm47xx_prom_highmem_init(); ++#endif + #endif + } else { + printk(KERN_INFO "bcm47xx: using ssb bus\n"); +--- a/arch/mips/include/asm/pgtable-32.h ++++ b/arch/mips/include/asm/pgtable-32.h +@@ -18,6 +18,8 @@ + + #include + ++extern int temp_tlb_entry __cpuinitdata; ++ + /* + * - add_temporary_entry() add a temporary TLB entry. We use TLB entries + * starting at the top and working down. This is for populating the +--- a/arch/mips/mm/tlb-r4k.c ++++ b/arch/mips/mm/tlb-r4k.c +@@ -417,7 +417,7 @@ int __init has_transparent_hugepage(void + * lifetime of the system + */ + +-static int temp_tlb_entry __cpuinitdata; ++int temp_tlb_entry __cpuinitdata; + + __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1, + unsigned long entryhi, unsigned long pagemask) diff --git a/target/linux/brcm47xx/patches-3.14/830-huawei_e970_support.patch b/target/linux/brcm47xx/patches-3.14/830-huawei_e970_support.patch index 834e5e0300..107cedc4e1 100644 --- a/target/linux/brcm47xx/patches-3.14/830-huawei_e970_support.patch +++ b/target/linux/brcm47xx/patches-3.14/830-huawei_e970_support.patch @@ -8,7 +8,7 @@ #include #include #include -@@ -266,6 +267,33 @@ static struct fixed_phy_status bcm47xx_f +@@ -269,6 +270,33 @@ static struct fixed_phy_status bcm47xx_f .duplex = DUPLEX_FULL, }; @@ -42,7 +42,7 @@ static int __init bcm47xx_register_bus_complete(void) { switch (bcm47xx_bus_type) { -@@ -285,6 +313,7 @@ static int __init bcm47xx_register_bus_c +@@ -288,6 +316,7 @@ static int __init bcm47xx_register_bus_c bcm47xx_workarounds(); fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);