From: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Date: Thu, 28 May 2020 07:04:17 +0000 (+0800)
Subject: generic: mt7530: support adjusting EEE
X-Git-Tag: v21.02.0-rc1~2552
X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=commitdiff_plain;h=5b9ba4a93e83b731b9f315e0afb5fbb6f032b1b8

generic: mt7530: support adjusting EEE

Add support for adjusting EEE with ethtool

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
---

diff --git a/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch b/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch
new file mode 100644
index 0000000000..1822647ff1
--- /dev/null
+++ b/target/linux/generic/pending-5.4/761-net-dsa-mt7530-Support-EEE-features.patch
@@ -0,0 +1,121 @@
+From 9cfb2d426c38272f245e9e6f62b3552d1ed5852b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= <opensource@vdorst.com>
+Date: Tue, 21 Apr 2020 00:18:08 +0200
+Subject: [PATCH] net: dsa: mt7530: Support EEE features
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: René van Dorst <opensource@vdorst.com>
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -1419,9 +1419,13 @@ static void mt7530_phylink_mac_config(st
+ 	switch (state->speed) {
+ 	case SPEED_1000:
+ 		mcr_new |= PMCR_FORCE_SPEED_1000;
++		if (priv->eee_enable & BIT(port))
++			mcr_new |= PMCR_FORCE_EEE1G;
+ 		break;
+ 	case SPEED_100:
+ 		mcr_new |= PMCR_FORCE_SPEED_100;
++		if (priv->eee_enable & BIT(port))
++			mcr_new |= PMCR_FORCE_EEE100;
+ 		break;
+ 	}
+ 	if (state->duplex == DUPLEX_FULL) {
+@@ -1557,6 +1561,54 @@ mt7530_phylink_mac_link_state(struct dsa
+ 	return 1;
+ }
+ 
++static int mt7530_get_mac_eee(struct dsa_switch *ds, int port,
++			      struct ethtool_eee *e)
++{
++	struct mt7530_priv *priv = ds->priv;
++	u32 eeecr, pmsr;
++
++	e->eee_enabled = !!(priv->eee_enable & BIT(port));
++
++	if (e->eee_enabled) {
++		eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
++		e->tx_lpi_enabled = !(eeecr & LPI_MODE_EN);
++		e->tx_lpi_timer   = (eeecr >> 4) & 0xFFF;
++		pmsr = mt7530_read(priv, MT7530_PMSR_P(port));
++		e->eee_active  = e->eee_enabled && !!(pmsr & PMSR_EEE1G);
++	} else {
++		e->tx_lpi_enabled = 0;
++		e->tx_lpi_timer = 0;
++		e->eee_active = 0;
++	}
++
++	return 0;
++}
++
++static int mt7530_set_mac_eee(struct dsa_switch *ds, int port,
++			      struct ethtool_eee *e)
++{
++	struct mt7530_priv *priv = ds->priv;
++	u32 eeecr;
++
++	if (e->tx_lpi_enabled && e->tx_lpi_timer > 0xFFF)
++		return -EINVAL;
++
++	if (e->eee_enabled) {
++		priv->eee_enable |= BIT(port);
++		//MT7530_PMEEECR_P
++		eeecr = mt7530_read(priv, MT7530_PMEEECR_P(port));
++		eeecr &= 0xFFFF0000;
++		if (!e->tx_lpi_enabled)
++			eeecr |= LPI_MODE_EN;
++		eeecr = LPI_THRESH(e->tx_lpi_timer);
++		mt7530_write(priv, MT7530_PMEEECR_P(port), eeecr);
++	} else {
++		priv->eee_enable &= ~(BIT(port));
++	}
++
++	return 0;
++}
++
+ static const struct dsa_switch_ops mt7530_switch_ops = {
+ 	.get_tag_protocol	= mtk_get_tag_protocol,
+ 	.setup			= mt7530_setup,
+@@ -1584,6 +1636,8 @@ static const struct dsa_switch_ops mt753
+ 	.phylink_mac_config	= mt7530_phylink_mac_config,
+ 	.phylink_mac_link_down	= mt7530_phylink_mac_link_down,
+ 	.phylink_mac_link_up	= mt7530_phylink_mac_link_up,
++	.get_mac_eee		= mt7530_get_mac_eee,
++	.set_mac_eee		= mt7530_set_mac_eee,
+ };
+ 
+ static const struct of_device_id mt7530_of_match[] = {
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -212,6 +212,8 @@ enum mt7530_vlan_port_attr {
+ #define  PMCR_RX_EN			BIT(13)
+ #define  PMCR_BACKOFF_EN		BIT(9)
+ #define  PMCR_BACKPR_EN			BIT(8)
++#define  PMCR_FORCE_EEE1G		BIT(7)
++#define  PMCR_FORCE_EEE100		BIT(6)
+ #define  PMCR_TX_FC_EN			BIT(5)
+ #define  PMCR_RX_FC_EN			BIT(4)
+ #define  PMCR_FORCE_SPEED_1000		BIT(3)
+@@ -233,6 +235,12 @@ enum mt7530_vlan_port_attr {
+ #define  PMSR_DPX			BIT(1)
+ #define  PMSR_LINK			BIT(0)
+ 
++#define MT7530_PMEEECR_P(x)		(0x3004 + (x) * 0x100)
++#define  WAKEUP_TIME_1000(x)		((x & 0xFF) << 24)
++#define  WAKEUP_TIME_100(x)		((x & 0xFF) << 16)
++#define  LPI_THRESH(x)			((x & 0xFFF) << 4)
++#define  LPI_MODE_EN			BIT(0)
++
+ /* Register for MIB */
+ #define MT7530_PORT_MIB_COUNTER(x)	(0x4000 + (x) * 0x100)
+ #define MT7530_MIB_CCR			0x4fe0
+@@ -471,6 +479,7 @@ struct mt7530_priv {
+ 	unsigned int		p5_intf_sel;
+ 	u8			mirror_rx;
+ 	u8			mirror_tx;
++	u8			eee_enable;
+ 
+ 	struct mt7530_port	ports[MT7530_NUM_PORTS];
+ 	/* protect among processes for registers access*/