From: Daniel F. Dickinson Date: Sun, 29 Jul 2018 08:33:24 +0000 (-0400) Subject: ar71xx: cap324: Use correct MAC addresses X-Git-Tag: v19.07.0-rc1~3043 X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=commitdiff_plain;h=739eaae9ca86b243b81009fc21fb7ecc8a7b5b82;ds=sidebyside ar71xx: cap324: Use correct MAC addresses The wrong MAC addresses (from the point of view of the physical device label) were being assigned to the wrong interfaces. Fix that. Signed-off-by: Daniel F. Dickinson --- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cap324.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cap324.c index 2a6aed5b4c..edde8a24bb 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cap324.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cap324.c @@ -106,11 +106,11 @@ static void __init cap324_setup(void) ARRAY_SIZE(cap324_gpio_keys), cap324_gpio_keys); - ath79_init_mac(mac, art + CAP324_MAC_OFFSET, -1); + ath79_init_mac(mac, art + CAP324_MAC_OFFSET, -2); ath79_wmac_disable_2ghz(); ath79_register_wmac(art + CAP324_WMAC_CALDATA_OFFSET, mac); - ath79_init_mac(mac, art + CAP324_MAC_OFFSET, -2); + ath79_init_mac(mac, art + CAP324_MAC_OFFSET, -1); ap91_pci_init(art + CAP324_PCIE_CALDATA_OFFSET, mac); ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | @@ -119,7 +119,7 @@ static void __init cap324_setup(void) ath79_register_mdio(0, 0x0); ath79_init_mac(ath79_eth0_data.mac_addr, - art + CAP324_MAC_OFFSET, -2); + art + CAP324_MAC_OFFSET, 0); /* GMAC0 is connected to an external PHY */ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;