From: Sven Eckelmann <sven.eckelmann@openmesh.com>
Date: Mon, 19 Mar 2018 13:52:38 +0000 (+0100)
Subject: ipq40xx: Use constant to set gpio active low/high
X-Git-Tag: v18.06.0-rc1~565
X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=commitdiff_plain;h=9ca81646b9235f8963c5264f15597a9b61c029d4;hp=688ae1c4c0591508540f231512c3a0c81bc51586

ipq40xx: Use constant to set gpio active low/high

The GPIO configuration in the DTS have as third parameter the active
low/high configuration. This parameter is not easy to parse by humans when
it is only set to 0/1. It is better to use the predefined constants
GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW.

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
---

diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts
index 1ccd9f91c5..222d39b7f6 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts
@@ -190,7 +190,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 0>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 
 	m25p80@0 {
 		#address-cells = <1>;
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
index 2b40b9e171..446da0451b 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
@@ -216,8 +216,8 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 0>,
-		   <&tlmm 59 0>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>,
+		   <&tlmm 59 GPIO_ACTIVE_HIGH>;
 
 	m25p80@0 {
 		#address-cells = <1>;
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
index 753adf9373..eeadc075dd 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -15,6 +15,7 @@
  */
 
 #include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
@@ -101,7 +102,7 @@
 			pinctrl-0 = <&spi_0_pins>;
 			pinctrl-names = "default";
 			status = "okay";
-			cs-gpios = <&tlmm 12 0>;
+			cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 
 			mx25l25635e@0 {
 				#address-cells = <1>;
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts
index 65e802b2b2..4b5cbcac33 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts
@@ -225,7 +225,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 0>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 
 	mx25l25635f@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
index 746b289e3b..f9f0f96ae9 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
@@ -167,7 +167,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 0>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 
 	m25p80@0 {
 		#address-cells = <1>;
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
index f3db47fb75..c4b002bdd6 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
@@ -193,7 +193,7 @@
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
-	cs-gpios = <&tlmm 54 0>;
+	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
 
 	mx25l25635f@0 {
 		compatible = "jedec,spi-nor";
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
index 9c1ef4f020..ef6230126f 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
@@ -60,7 +60,7 @@
 			status = "okay";
 			pinctrl-0 = <&mdio_pins>;
 			pinctrl-names = "default";
-			phy-reset-gpio = <&tlmm 47 0>;
+			phy-reset-gpio = <&tlmm 47 GPIO_ACTIVE_HIGH>;
 			/delete-node/ ethernet-phy@0;
 			/delete-node/ ethernet-phy@2;
 			/delete-node/ ethernet-phy@3;