From: Felix Fietkau Date: Sat, 7 Nov 2015 12:51:39 +0000 (+0000) Subject: ar71xx: Add support for ZyXEL NBG6616. X-Git-Tag: reboot~1620 X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fopenwrt.git;a=commitdiff_plain;h=ae7e7239b864c00b1e6c8b7856f1770a56c38c29 ar71xx: Add support for ZyXEL NBG6616. Signed-off-by: Benjamin Berg SVN-Revision: 47405 --- diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 1375f38b79..2f489d8f94 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -173,8 +173,11 @@ get_status_led() { nbg460n_550n_550nh) status_led="nbg460n:green:power" ;; + nbg6616) + status_led="nbg6616:green:power" + ;; nbg6716) - status_led="zyxel:white:power" + status_led="nbg6716:white:power" ;; om2p | \ om2pv2 | \ diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index f53c853841..74c3417688 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -84,8 +84,10 @@ case "$FIRMWARE" in ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) ;; + nbg6616 | \ nbg6716) ath10kcal_extract "RFdata" 20480 2116 + ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2) ;; rb-911g-5hpacd) ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116 diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds index abed456cd6..b269181472 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds @@ -306,12 +306,19 @@ nbg460n_550n_550nh) ucidef_set_led_wlan "wlan" "WLAN" "nbg460n:green:wlan" "phy0tpt" ;; +nbg6616) + ucidef_set_led_wlan "wlan" "WLAN" "nbg6616:green:wifi2g" "phy1tpt" + ucidef_set_led_wlan "wlan5" "WLAN5" "nbg6616:green:wifi5g" "phy0tpt" + ucidef_set_led_usbdev "usb1" "USB1" "nbg6616:green:usb1" "1-1" + ucidef_set_led_usbdev "usb2" "USB2" "nbg6616:green:usb2" "2-1" + ;; + nbg6716) - ucidef_set_led_netdev "wan" "WAN" "zyxel:white:internet" "eth1" - ucidef_set_led_wlan "wlan" "WLAN" "zyxel:white:wifi2g" "phy1tpt" - ucidef_set_led_wlan "wlan5" "WLAN5" "zyxel:white:wifi5g" "phy0tpt" - ucidef_set_led_usbdev "usb1" "USB1" "zyxel:white:usb1" "2-1" - ucidef_set_led_usbdev "usb2" "USB2" "zyxel:white:usb2" "1-1" + ucidef_set_led_netdev "wan" "WAN" "nbg6716:white:internet" "eth1" + ucidef_set_led_wlan "wlan" "WLAN" "nbg6716:white:wifi2g" "phy1tpt" + ucidef_set_led_wlan "wlan5" "WLAN5" "nbg6716:white:wifi5g" "phy0tpt" + ucidef_set_led_usbdev "usb1" "USB1" "nbg6716:white:usb1" "1-1" + ucidef_set_led_usbdev "usb2" "USB2" "nbg6716:white:usb2" "2-1" ;; om2p | \ diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index f6ac89118f..5e93835502 100644 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -134,6 +134,7 @@ nbg460n_550n_550nh) ucidef_add_switch_vlan "switch0" "0" "0 1 2 3 5" ;; +nbg6616 |\ nbg6716) ucidef_set_interfaces_lan_wan "eth0.1" "eth1" ucidef_add_switch "switch0" "1" "1" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 5f02e4e1ca..2fdc5381c2 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -565,6 +565,9 @@ ar71xx_board_detect() { *"NBG460N/550N/550NH") name="nbg460n_550n_550nh" ;; + *"Zyxel NBG6616") + name="nbg6616" + ;; *"Zyxel NBG6716") name="nbg6716" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index a464feefad..ae498b9c1e 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -405,6 +405,7 @@ platform_check_image() { return 1 ;; + nbg6616 | \ unifi-outdoor-plus | \ uap-pro) [ "$magic_long" != "19852003" ] && { diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c index 69a73cc6c9..73e11f1945 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c @@ -1,5 +1,5 @@ /* - * ZyXEL NBG6716 board support + * ZyXEL NBG6716/NBG6616 board support * * Based on the Qualcomm Atheros AP135/AP136 reference board support code * Copyright (c) 2012 Qualcomm Atheros @@ -66,39 +66,44 @@ #define NBG6716_WMAC_CALDATA_OFFSET 0x1000 #define NBG6716_PCIE_CALDATA_OFFSET 0x5000 +/* NBG6616 has a different GPIO usage as it does not have USB Buttons */ +#define NBG6616_GPIO_LED_USB0 14 +#define NBG6616_GPIO_LED_USB1 21 +#define NBG6616_GPIO_LED_WPS 0 + static struct gpio_led nbg6716_leds_gpio[] __initdata = { { - .name = "zyxel:white:internet", + .name = "nbg6716:white:internet", .gpio = NBG6716_GPIO_LED_INTERNET, .active_low = 1, }, { - .name = "zyxel:white:power", + .name = "nbg6716:white:power", .gpio = NBG6716_GPIO_LED_POWER, .active_low = 1, }, { - .name = "zyxel:white:usb1", + .name = "nbg6716:white:usb1", .gpio = NBG6716_GPIO_LED_USB1, .active_low = 1, }, { - .name = "zyxel:white:usb2", + .name = "nbg6716:white:usb2", .gpio = NBG6716_GPIO_LED_USB2, .active_low = 1, }, { - .name = "zyxel:white:wifi2g", + .name = "nbg6716:white:wifi2g", .gpio = NBG6716_GPIO_LED_WIFI2G, .active_low = 1, }, { - .name = "zyxel:white:wifi5g", + .name = "nbg6716:white:wifi5g", .gpio = NBG6716_GPIO_LED_WIFI5G, .active_low = 1, }, { - .name = "zyxel:white:wps", + .name = "nbg6716:white:wps", .gpio = NBG6716_GPIO_LED_WPS, .active_low = 1, } @@ -147,6 +152,69 @@ static struct gpio_keys_button nbg6716_gpio_keys[] __initdata = { }, }; + + +static struct gpio_led nbg6616_leds_gpio[] __initdata = { + { + .name = "nbg6616:green:power", + .gpio = NBG6716_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "nbg6616:green:usb2", + .gpio = NBG6616_GPIO_LED_USB0, + .active_low = 1, + }, + { + .name = "nbg6616:green:usb1", + .gpio = NBG6616_GPIO_LED_USB1, + .active_low = 1, + }, + { + .name = "nbg6616:green:wifi2g", + .gpio = NBG6716_GPIO_LED_WIFI2G, + .active_low = 1, + }, + { + .name = "nbg6616:green:wifi5g", + .gpio = NBG6716_GPIO_LED_WIFI5G, + .active_low = 1, + }, + { + .name = "nbg6616:green:wps", + .gpio = NBG6616_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button nbg6616_gpio_keys[] __initdata = { + { + .desc = "RESET button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL, + .gpio = NBG6716_GPIO_BTN_RESET, + .active_low = 1, + }, + { + .desc = "RFKILL button", + .type = EV_KEY, + .code = KEY_RFKILL, + .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL, + .gpio = NBG6716_GPIO_BTN_RFKILL, + .active_low = 1, + }, + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL, + .gpio = NBG6716_GPIO_BTN_WPS, + .active_low = 1, + }, +}; + + static struct ar8327_pad_cfg nbg6716_ar8327_pad0_cfg; static struct ar8327_pad_cfg nbg6716_ar8327_pad6_cfg; static struct ar8327_led_cfg nbg6716_ar8327_led_cfg; @@ -179,9 +247,9 @@ static struct mdio_board_info nbg6716_mdio0_info[] = { }, }; -static void nbg6716_get_mac(const char *name, char *mac) +static void nbg6716_get_mac(void* nvram_addr, const char *name, char *mac) { - u8 *nvram = (u8 *) KSEG1ADDR(0x1f040000); + u8 *nvram = (u8 *) KSEG1ADDR(nvram_addr); int err; err = ath79_nvram_parse_mac_addr(nvram, 0x10000, @@ -190,18 +258,19 @@ static void nbg6716_get_mac(const char *name, char *mac) pr_err("no MAC address found for %s\n", name); } -static void __init nbg6716_common_setup(void) +static void __init nbg6716_common_setup(u32 leds_num, struct gpio_led* leds, + u32 keys_num, + struct gpio_keys_button* keys, + void* art_addr, void* nvram) { - u8 *art = (u8 *) KSEG1ADDR(0x1f050000); + u8 *art = (u8 *) KSEG1ADDR(art_addr); u8 tmpmac[ETH_ALEN]; ath79_register_m25p80(NULL); - ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg6716_leds_gpio), - nbg6716_leds_gpio); + ath79_register_leds_gpio(-1, leds_num, leds); ath79_register_gpio_keys_polled(-1, NBG6716_KEYS_POLL_INTERVAL, - ARRAY_SIZE(nbg6716_gpio_keys), - nbg6716_gpio_keys); + keys_num, keys); ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW); ath79_register_nfc(); @@ -212,7 +281,7 @@ static void __init nbg6716_common_setup(void) ath79_register_usb(); - nbg6716_get_mac("ethaddr=", tmpmac); + nbg6716_get_mac(nvram, "ethaddr=", tmpmac); ath79_register_pci(); @@ -267,10 +336,46 @@ static void __init nbg6716_010_setup(void) nbg6716_ar8327_led_cfg.led_ctrl2 = 0xffb7ffb7; nbg6716_ar8327_led_cfg.led_ctrl3 = 0x03ffff00; - nbg6716_common_setup(); + nbg6716_common_setup(ARRAY_SIZE(nbg6716_leds_gpio), nbg6716_leds_gpio, + ARRAY_SIZE(nbg6716_gpio_keys), nbg6716_gpio_keys, + (void*) 0x1f050000, (void*) 0x1f040000); +} + +static void __init nbg6616_010_setup(void) +{ + /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */ + nbg6716_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII; + nbg6716_ar8327_pad0_cfg.txclk_delay_en = true; + nbg6716_ar8327_pad0_cfg.rxclk_delay_en = true; + nbg6716_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1; + nbg6716_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2; + + /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */ + nbg6716_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII; + nbg6716_ar8327_pad6_cfg.rxclk_delay_en = true; + nbg6716_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0; + + ath79_eth0_pll_data.pll_1000 = 0xa6000000; + ath79_eth1_pll_data.pll_1000 = 0x03000101; + + nbg6716_ar8327_led_cfg.open_drain = 0; + nbg6716_ar8327_led_cfg.led_ctrl0 = 0xffb7ffb7; + nbg6716_ar8327_led_cfg.led_ctrl1 = 0xffb7ffb7; + nbg6716_ar8327_led_cfg.led_ctrl2 = 0xffb7ffb7; + nbg6716_ar8327_led_cfg.led_ctrl3 = 0x03ffff00; + + + nbg6716_common_setup(ARRAY_SIZE(nbg6616_leds_gpio), nbg6616_leds_gpio, + ARRAY_SIZE(nbg6616_gpio_keys), nbg6616_gpio_keys, + (void*) 0x1f040000, (void*) 0x1f030000); } + MIPS_MACHINE(ATH79_MACH_NBG6716, "NBG6716", "Zyxel NBG6716", nbg6716_010_setup); +MIPS_MACHINE(ATH79_MACH_NBG6616, "NBG6616", + "Zyxel NBG6616", + nbg6616_010_setup); + diff --git a/target/linux/ar71xx/generic/profiles/zyxel.mk b/target/linux/ar71xx/generic/profiles/zyxel.mk index 66258bdb82..991a13a96f 100644 --- a/target/linux/ar71xx/generic/profiles/zyxel.mk +++ b/target/linux/ar71xx/generic/profiles/zyxel.mk @@ -15,3 +15,15 @@ define Profile/NBG_460N_550N_550NH/Description endef $(eval $(call Profile,NBG_460N_550N_550NH)) + + +define Profile/NBG6616 + NAME:=ZyXEL NBG6616 + PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev kmod-usb-storage kmod-rtc-pcf8563 kmod-ath10k +endef + +define Profile/NBG6616/Description + Package set optimized for the ZyXEL NBG6616 +endef + +$(eval $(call Profile,NBG6616)) diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 15cf2c6b8b..29e5064909 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -2055,6 +2055,39 @@ ifdef CONFIG_PACKAGE_uboot-ar71xx-nbg460n_550n_550nh endef endif +define Device/NBG6616 + BOARDNAME = NBG6616 + KERNEL_SIZE = 2048k + IMAGE_SIZE = 15323k + MTDPARTS = spi0.0:192k(u-boot)ro,64k(env)ro,64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k@0x120000(firmware) + CMDLINE += mem=128M + IMAGES := sysupgrade.bin + KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 boot/vmlinux.lzma.uImage + IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) + # We cannot currently build a factory image. It is the sysupgrade image + # prefixed with a header (which is actually written into the MTD device). + # The header is 2kiB and is filled with 0xff. The format seems to be: + # 2 bytes: 0x0000 + # 2 bytes: checksum of the data partition (big endian) + # 4 bytes: length of the contained image file (big endian) + # 32 bytes: Firmware Version string (NUL terminated, 0xff padded) + # 2 bytes: 0x0000 + # 2 bytes: checksum over the header partition (big endian) + # 32 bytes: Model (e.g. "NBG6616", NUL termiated, 0xff padded) + # rest: 0xff padding + # + # The checksums are calculated by adding up all bytes and if a 16bit + # overflow occurs, one is added and the sum is masked to 16 bit: + # csum = csum + databyte; if (csum > 0xffff) { csum += 1; csum &= 0xffff }; + # Should the file have an odd number of bytes then the byte len-0x800 is + # used additionally. + # The checksum for the header is calcualted over the first 2048 bytes with + # the firmware checksum as the placeholder during calculation. + # + # The header is padded with 0xff to the erase block size of the device. +endef + +TARGET_DEVICES += NBG6616 define Image/Build/ZyXELNAND/buildkernel $(eval kernelsize=$(call mtdpartsize,kernel,$(5))) diff --git a/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch index 17cabe1e31..0295cd99ed 100644 --- a/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch +++ b/target/linux/ar71xx/patches-4.1/700-MIPS-ath79-openwrt-machines.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/machtypes.h +++ b/arch/mips/ath79/machtypes.h -@@ -16,24 +16,210 @@ +@@ -16,24 +16,211 @@ enum ath79_mach_type { ATH79_MACH_GENERIC = 0, @@ -75,6 +75,7 @@ + ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */ + ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */ + ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */ ++ ATH79_MACH_NBG6616, /* Zyxel NBG6616 */ + ATH79_MACH_NBG6716, /* Zyxel NBG6716 */ + ATH79_MACH_OM2P_HSv2, /* OpenMesh OM2P-HSv2 */ + ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */ @@ -1503,7 +1504,7 @@ + select ATH79_DEV_WMAC + +config ATH79_MACH_NBG6716 -+ bool "Zyxel NBG6716 board support" ++ bool "Zyxel NBG6616/NBG6716 board support" + select SOC_QCA955X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS